* Omit those entries for boards you don't have installed.
*
* TODO
- * Hotplug
* Merge testing
* 64-bit verification
*/
#include <linux/module.h>
+#include <linux/firmware.h>
#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/sched.h>
#include <linux/serial.h>
#include <linux/mm.h>
-#include <linux/miscdevice.h>
#include <linux/interrupt.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/ioport.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
#include <asm/system.h>
#include <linux/pci.h>
#include <linux/isicom.h>
+#define InterruptTheCard(base) outw(0, (base) + 0xc)
+#define ClearInterrupt(base) inw((base) + 0x0a)
+
+#define pr_dbg(str...) pr_debug("ISICOM: " str)
+#ifdef DEBUG
+#define isicom_paranoia_check(a, b, c) __isicom_paranoia_check((a), (b), (c))
+#else
+#define isicom_paranoia_check(a, b, c) 0
+#endif
+
+static int isicom_probe(struct pci_dev *, const struct pci_device_id *);
+static void __devexit isicom_remove(struct pci_dev *);
+
static struct pci_device_id isicom_pci_tbl[] = {
- { VENDOR_ID, 0x2028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- { VENDOR_ID, 0x2051, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- { VENDOR_ID, 0x2052, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- { VENDOR_ID, 0x2053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- { VENDOR_ID, 0x2054, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- { VENDOR_ID, 0x2055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- { VENDOR_ID, 0x2056, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- { VENDOR_ID, 0x2057, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- { VENDOR_ID, 0x2058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_DEVICE(VENDOR_ID, 0x2028) },
+ { PCI_DEVICE(VENDOR_ID, 0x2051) },
+ { PCI_DEVICE(VENDOR_ID, 0x2052) },
+ { PCI_DEVICE(VENDOR_ID, 0x2053) },
+ { PCI_DEVICE(VENDOR_ID, 0x2054) },
+ { PCI_DEVICE(VENDOR_ID, 0x2055) },
+ { PCI_DEVICE(VENDOR_ID, 0x2056) },
+ { PCI_DEVICE(VENDOR_ID, 0x2057) },
+ { PCI_DEVICE(VENDOR_ID, 0x2058) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, isicom_pci_tbl);
+static struct pci_driver isicom_driver = {
+ .name = "isicom",
+ .id_table = isicom_pci_tbl,
+ .probe = isicom_probe,
+ .remove = __devexit_p(isicom_remove)
+};
+
static int prev_card = 3; /* start servicing isi_card[0] */
static struct tty_driver *isicom_normal;
-static struct timer_list tx;
-static char re_schedule = 1;
-#ifdef ISICOM_DEBUG
-static unsigned long tx_count = 0;
-#endif
-
-static int ISILoad_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg);
-
static void isicom_tx(unsigned long _data);
static void isicom_start(struct tty_struct *tty);
-static unsigned char *tmp_buf;
-static DECLARE_MUTEX(tmp_buf_sem);
+static DEFINE_TIMER(tx, isicom_tx, 0, 0);
/* baud index mappings from linux defns to isi */
static signed char linuxb_to_isib[] = {
- -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 16, 17, 18, 19
+ -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 16, 17, 18, 19, 20, 21
};
struct isi_board {
- unsigned short base;
- unsigned char irq;
+ unsigned long base;
+ int irq;
unsigned char port_count;
unsigned short status;
- unsigned short port_status; /* each bit represents a single port */
+ unsigned short port_status; /* each bit for each port */
unsigned short shift_count;
- struct isi_port * ports;
+ struct isi_port *ports;
signed char count;
- unsigned char isa;
spinlock_t card_lock; /* Card wide lock 11/5/00 -sameer */
unsigned long flags;
+ unsigned int index;
};
struct isi_port {
unsigned short magic;
- unsigned int flags;
- int count;
- int blocked_open;
- int close_delay;
- unsigned short channel;
- unsigned short status;
- unsigned short closing_wait;
- struct isi_board * card;
- struct tty_struct * tty;
- wait_queue_head_t close_wait;
- wait_queue_head_t open_wait;
- struct work_struct hangup_tq;
- struct work_struct bh_tqueue;
- unsigned char * xmit_buf;
+ struct tty_port port;
+ u16 channel;
+ u16 status;
+ struct isi_board *card;
+ unsigned char *xmit_buf;
int xmit_head;
int xmit_tail;
int xmit_cnt;
* it wants to talk.
*/
-static int lock_card(struct isi_board *card)
+static inline int WaitTillCardIsFree(unsigned long base)
{
- char retries;
- unsigned short base = card->base;
+ unsigned int count = 0;
+ unsigned int a = in_atomic(); /* do we run under spinlock? */
- for (retries = 0; retries < 100; retries++) {
- spin_lock_irqsave(&card->card_lock, card->flags);
- if (inw(base + 0xe) & 0x1) {
- return 1;
- } else {
- spin_unlock_irqrestore(&card->card_lock, card->flags);
- udelay(1000); /* 1ms */
- }
- }
- printk(KERN_WARNING "ISICOM: Failed to lock Card (0x%x)\n", card->base);
- return 0; /* Failed to aquire the card! */
+ while (!(inw(base + 0xe) & 0x1) && count++ < 100)
+ if (a)
+ mdelay(1);
+ else
+ msleep(1);
+
+ return !(inw(base + 0xe) & 0x1);
}
-static int lock_card_at_interrupt(struct isi_board *card)
+static int lock_card(struct isi_board *card)
{
- unsigned char retries;
- unsigned short base = card->base;
+ unsigned long base = card->base;
+ unsigned int retries, a;
- for (retries = 0; retries < 200; retries++) {
+ for (retries = 0; retries < 10; retries++) {
spin_lock_irqsave(&card->card_lock, card->flags);
-
- if (inw(base + 0xe) & 0x1)
- return 1;
- else
- spin_unlock_irqrestore(&card->card_lock, card->flags);
+ for (a = 0; a < 10; a++) {
+ if (inw(base + 0xe) & 0x1)
+ return 1;
+ udelay(10);
+ }
+ spin_unlock_irqrestore(&card->card_lock, card->flags);
+ msleep(10);
}
- /* Failing in interrupt is an acceptable event */
- return 0; /* Failed to aquire the card! */
+ printk(KERN_WARNING "ISICOM: Failed to lock Card (0x%lx)\n",
+ card->base);
+
+ return 0; /* Failed to acquire the card! */
}
static void unlock_card(struct isi_board *card)
* ISI Card specific ops ...
*/
+/* card->lock HAS to be held */
static void raise_dtr(struct isi_port *port)
{
struct isi_board *card = port->card;
- unsigned short base = card->base;
- unsigned char channel = port->channel;
+ unsigned long base = card->base;
+ u16 channel = port->channel;
- if (!lock_card(card))
+ if (WaitTillCardIsFree(base))
return;
outw(0x8000 | (channel << card->shift_count) | 0x02, base);
outw(0x0504, base);
InterruptTheCard(base);
port->status |= ISI_DTR;
- unlock_card(card);
}
+/* card->lock HAS to be held */
static inline void drop_dtr(struct isi_port *port)
{
struct isi_board *card = port->card;
- unsigned short base = card->base;
- unsigned char channel = port->channel;
+ unsigned long base = card->base;
+ u16 channel = port->channel;
- if (!lock_card(card))
+ if (WaitTillCardIsFree(base))
return;
outw(0x8000 | (channel << card->shift_count) | 0x02, base);
outw(0x0404, base);
InterruptTheCard(base);
port->status &= ~ISI_DTR;
- unlock_card(card);
}
+/* card->lock HAS to be held */
static inline void raise_rts(struct isi_port *port)
{
struct isi_board *card = port->card;
- unsigned short base = card->base;
- unsigned char channel = port->channel;
+ unsigned long base = card->base;
+ u16 channel = port->channel;
- if (!lock_card(card))
+ if (WaitTillCardIsFree(base))
return;
outw(0x8000 | (channel << card->shift_count) | 0x02, base);
outw(0x0a04, base);
InterruptTheCard(base);
port->status |= ISI_RTS;
- unlock_card(card);
}
+
+/* card->lock HAS to be held */
static inline void drop_rts(struct isi_port *port)
{
struct isi_board *card = port->card;
- unsigned short base = card->base;
- unsigned char channel = port->channel;
+ unsigned long base = card->base;
+ u16 channel = port->channel;
- if (!lock_card(card))
+ if (WaitTillCardIsFree(base))
return;
outw(0x8000 | (channel << card->shift_count) | 0x02, base);
outw(0x0804, base);
InterruptTheCard(base);
port->status &= ~ISI_RTS;
- unlock_card(card);
}
+/* card->lock MUST NOT be held */
static inline void raise_dtr_rts(struct isi_port *port)
{
struct isi_board *card = port->card;
- unsigned short base = card->base;
- unsigned char channel = port->channel;
+ unsigned long base = card->base;
+ u16 channel = port->channel;
if (!lock_card(card))
return;
unlock_card(card);
}
+/* card->lock HAS to be held */
static void drop_dtr_rts(struct isi_port *port)
{
struct isi_board *card = port->card;
- unsigned short base = card->base;
- unsigned char channel = port->channel;
+ unsigned long base = card->base;
+ u16 channel = port->channel;
- if (!lock_card(card))
+ if (WaitTillCardIsFree(base))
return;
outw(0x8000 | (channel << card->shift_count) | 0x02, base);
outw(0x0c04, base);
InterruptTheCard(base);
port->status &= ~(ISI_RTS | ISI_DTR);
- unlock_card(card);
}
-static inline void kill_queue(struct isi_port *port, short queue)
-{
- struct isi_board *card = port->card;
- unsigned short base = card->base;
- unsigned char channel = port->channel;
-
- if (!lock_card(card))
- return;
-
- outw(0x8000 | (channel << card->shift_count) | 0x02, base);
- outw((queue << 8) | 0x06, base);
- InterruptTheCard(base);
- unlock_card(card);
-}
-
-
-/*
- * Firmware loader driver specific routines. This needs to mostly die
- * and be replaced with request_firmware.
- */
-
-static struct file_operations ISILoad_fops = {
- .owner = THIS_MODULE,
- .ioctl = ISILoad_ioctl,
-};
-
-static struct miscdevice isiloader_device = {
- ISILOAD_MISC_MINOR, "isictl", &ISILoad_fops
-};
-
-
-static inline int WaitTillCardIsFree(unsigned short base)
-{
- unsigned long count=0;
- while( (!(inw(base+0xe) & 0x1)) && (count++ < 6000000));
- if (inw(base+0xe)&0x1)
- return 0;
- else
- return 1;
-}
-
-static int ISILoad_ioctl(struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long arg)
-{
- unsigned int card, i, j, signature, status, portcount = 0;
- unsigned long t;
- unsigned short word_count, base;
- bin_frame frame;
- void __user *argp = (void __user *)arg;
- /* exec_record exec_rec; */
-
- if (get_user(card, (int __user *)argp))
- return -EFAULT;
-
- if (card < 0 || card >= BOARD_COUNT)
- return -ENXIO;
-
- base=isi_card[card].base;
-
- if (base==0)
- return -ENXIO; /* disabled or not used */
-
- switch(cmd) {
- case MIOCTL_RESET_CARD:
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- printk(KERN_DEBUG "ISILoad:Resetting Card%d at 0x%x ",card+1,base);
-
- inw(base+0x8);
-
- for (t=jiffies+HZ/100;time_before(jiffies, t););
-
- outw(0,base+0x8); /* Reset */
-
- for (j=1;j<=3;j++) {
- for (t=jiffies+HZ;time_before(jiffies, t););
- printk(".");
- }
- signature=(inw(base+0x4)) & 0xff;
- if (isi_card[card].isa) {
-
- if (!(inw(base+0xe) & 0x1) || (inw(base+0x2))) {
-#ifdef ISICOM_DEBUG
- printk("\nbase+0x2=0x%x , base+0xe=0x%x",inw(base+0x2),inw(base+0xe));
-#endif
- printk("\nISILoad:ISA Card%d reset failure (Possible bad I/O Port Address 0x%x).\n",card+1,base);
- return -EIO;
- }
- }
- else {
- portcount = inw(base+0x2);
- if (!(inw(base+0xe) & 0x1) || ((portcount!=0) && (portcount!=4) && (portcount!=8))) {
-#ifdef ISICOM_DEBUG
- printk("\nbase+0x2=0x%x , base+0xe=0x%x",inw(base+0x2),inw(base+0xe));
-#endif
- printk("\nISILoad:PCI Card%d reset failure (Possible bad I/O Port Address 0x%x).\n",card+1,base);
- return -EIO;
- }
- }
- switch(signature) {
- case 0xa5:
- case 0xbb:
- case 0xdd:
- if (isi_card[card].isa)
- isi_card[card].port_count = 8;
- else {
- if (portcount == 4)
- isi_card[card].port_count = 4;
- else
- isi_card[card].port_count = 8;
- }
- isi_card[card].shift_count = 12;
- break;
-
- case 0xcc: isi_card[card].port_count = 16;
- isi_card[card].shift_count = 11;
- break;
-
- default: printk("ISILoad:Card%d reset failure (Possible bad I/O Port Address 0x%x).\n",card+1,base);
-#ifdef ISICOM_DEBUG
- printk("Sig=0x%x\n",signature);
-#endif
- return -EIO;
- }
- printk("-Done\n");
- return put_user(signature,(unsigned __user *)argp);
-
- case MIOCTL_LOAD_FIRMWARE:
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- if (copy_from_user(&frame, argp, sizeof(bin_frame)))
- return -EFAULT;
-
- if (WaitTillCardIsFree(base))
- return -EIO;
-
- outw(0xf0,base); /* start upload sequence */
- outw(0x00,base);
- outw((frame.addr), base); /* lsb of adderess */
-
- word_count=(frame.count >> 1) + frame.count % 2;
- outw(word_count, base);
- InterruptTheCard(base);
-
- for (i=0;i<=0x2f;i++); /* a wee bit of delay */
-
- if (WaitTillCardIsFree(base))
- return -EIO;
-
- if ((status=inw(base+0x4))!=0) {
- printk(KERN_WARNING "ISILoad:Card%d rejected load header:\nAddress:0x%x \nCount:0x%x \nStatus:0x%x \n",
- card+1, frame.addr, frame.count, status);
- return -EIO;
- }
- outsw(base, (void *) frame.bin_data, word_count);
-
- InterruptTheCard(base);
-
- for (i=0;i<=0x0f;i++); /* another wee bit of delay */
-
- if (WaitTillCardIsFree(base))
- return -EIO;
-
- if ((status=inw(base+0x4))!=0) {
- printk(KERN_ERR "ISILoad:Card%d got out of sync.Card Status:0x%x\n",card+1, status);
- return -EIO;
- }
- return 0;
-
- case MIOCTL_READ_FIRMWARE:
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- if (copy_from_user(&frame, argp, sizeof(bin_header)))
- return -EFAULT;
-
- if (WaitTillCardIsFree(base))
- return -EIO;
-
- outw(0xf1,base); /* start download sequence */
- outw(0x00,base);
- outw((frame.addr), base); /* lsb of adderess */
-
- word_count=(frame.count >> 1) + frame.count % 2;
- outw(word_count+1, base);
- InterruptTheCard(base);
-
- for (i=0;i<=0xf;i++); /* a wee bit of delay */
-
- if (WaitTillCardIsFree(base))
- return -EIO;
-
- if ((status=inw(base+0x4))!=0) {
- printk(KERN_WARNING "ISILoad:Card%d rejected verify header:\nAddress:0x%x \nCount:0x%x \nStatus:0x%x \n",
- card+1, frame.addr, frame.count, status);
- return -EIO;
- }
-
- inw(base);
- insw(base, frame.bin_data, word_count);
- InterruptTheCard(base);
-
- for (i=0;i<=0x0f;i++); /* another wee bit of delay */
-
- if (WaitTillCardIsFree(base))
- return -EIO;
-
- if ((status=inw(base+0x4))!=0) {
- printk(KERN_ERR "ISILoad:Card%d verify got out of sync.Card Status:0x%x\n",card+1, status);
- return -EIO;
- }
-
- if (copy_to_user(argp, &frame, sizeof(bin_frame)))
- return -EFAULT;
- return 0;
-
- case MIOCTL_XFER_CTRL:
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- if (WaitTillCardIsFree(base))
- return -EIO;
-
- outw(0xf2, base);
- outw(0x800, base);
- outw(0x0, base);
- outw(0x0, base);
- InterruptTheCard(base);
- outw(0x0, base+0x4); /* for ISI4608 cards */
-
- isi_card[card].status |= FIRMWARE_LOADED;
- return 0;
-
- default:
-#ifdef ISICOM_DEBUG
- printk(KERN_DEBUG "ISILoad: Received Ioctl cmd 0x%x.\n", cmd);
-#endif
- return -ENOIOCTLCMD;
- }
-}
-
-
/*
* ISICOM Driver specific routines ...
*
*/
-static inline int isicom_paranoia_check(struct isi_port const *port, char *name,
- const char *routine)
+static inline int __isicom_paranoia_check(struct isi_port const *port,
+ char *name, const char *routine)
{
-#ifdef ISICOM_DEBUG
- static const char *badmagic =
- KERN_WARNING "ISICOM: Warning: bad isicom magic for dev %s in %s.\n";
- static const char *badport =
- KERN_WARNING "ISICOM: Warning: NULL isicom port for dev %s in %s.\n";
if (!port) {
- printk(badport, name, routine);
+ printk(KERN_WARNING "ISICOM: Warning: bad isicom magic for "
+ "dev %s in %s.\n", name, routine);
return 1;
}
if (port->magic != ISICOM_MAGIC) {
- printk(badmagic, name, routine);
+ printk(KERN_WARNING "ISICOM: Warning: NULL isicom port for "
+ "dev %s in %s.\n", name, routine);
return 1;
}
-#endif
+
return 0;
}
static void isicom_tx(unsigned long _data)
{
- short count = (BOARD_COUNT-1), card, base;
+ unsigned long flags, base;
+ unsigned int retries;
+ short count = (BOARD_COUNT-1), card;
short txcount, wrd, residue, word_count, cnt;
struct isi_port *port;
struct tty_struct *tty;
-#ifdef ISICOM_DEBUG
- ++tx_count;
-#endif
-
/* find next active board */
card = (prev_card + 1) & 0x0003;
- while(count-- > 0) {
+ while (count-- > 0) {
if (isi_card[card].status & BOARD_ACTIVE)
break;
card = (card + 1) & 0x0003;
count = isi_card[card].port_count;
port = isi_card[card].ports;
base = isi_card[card].base;
- for (;count > 0;count--, port++) {
- if (!lock_card_at_interrupt(&isi_card[card]))
- continue;
- /* port not active or tx disabled to force flow control */
- if (!(port->flags & ASYNC_INITIALIZED) ||
- !(port->status & ISI_TXOK))
- unlock_card(&isi_card[card]);
- continue;
- tty = port->tty;
+ spin_lock_irqsave(&isi_card[card].card_lock, flags);
+ for (retries = 0; retries < 100; retries++) {
+ if (inw(base + 0xe) & 0x1)
+ break;
+ udelay(2);
+ }
+ if (retries >= 100)
+ goto unlock;
+ tty = tty_port_tty_get(&port->port);
+ if (tty == NULL)
+ goto put_unlock;
- if (tty == NULL) {
- unlock_card(&isi_card[card]);
+ for (; count > 0; count--, port++) {
+ /* port not active or tx disabled to force flow control */
+ if (!(port->port.flags & ASYNC_INITIALIZED) ||
+ !(port->status & ISI_TXOK))
continue;
- }
txcount = min_t(short, TX_SIZE, port->xmit_cnt);
- if (txcount <= 0 || tty->stopped || tty->hw_stopped) {
- unlock_card(&isi_card[card]);
+ if (txcount <= 0 || tty->stopped || tty->hw_stopped)
continue;
- }
- if (!(inw(base + 0x02) & (1 << port->channel))) {
- unlock_card(&isi_card[card]);
+
+ if (!(inw(base + 0x02) & (1 << port->channel)))
continue;
- }
-#ifdef ISICOM_DEBUG
- printk(KERN_DEBUG "ISICOM: txing %d bytes, port%d.\n",
- txcount, port->channel+1);
-#endif
- outw((port->channel << isi_card[card].shift_count) | txcount
- , base);
+
+ pr_dbg("txing %d bytes, port%d.\n", txcount,
+ port->channel + 1);
+ outw((port->channel << isi_card[card].shift_count) | txcount,
+ base);
residue = NO;
wrd = 0;
while (1) {
- cnt = min_t(int, txcount, (SERIAL_XMIT_SIZE - port->xmit_tail));
+ cnt = min_t(int, txcount, (SERIAL_XMIT_SIZE
+ - port->xmit_tail));
if (residue == YES) {
residue = NO;
if (cnt > 0) {
- wrd |= (port->xmit_buf[port->xmit_tail] << 8);
- port->xmit_tail = (port->xmit_tail + 1) & (SERIAL_XMIT_SIZE - 1);
+ wrd |= (port->port.xmit_buf[port->xmit_tail]
+ << 8);
+ port->xmit_tail = (port->xmit_tail + 1)
+ & (SERIAL_XMIT_SIZE - 1);
port->xmit_cnt--;
txcount--;
cnt--;
outw(wrd, base);
- }
- else {
+ } else {
outw(wrd, base);
break;
}
}
- if (cnt <= 0) break;
+ if (cnt <= 0)
+ break;
word_count = cnt >> 1;
- outsw(base, port->xmit_buf+port->xmit_tail, word_count);
- port->xmit_tail = (port->xmit_tail + (word_count << 1)) &
- (SERIAL_XMIT_SIZE - 1);
+ outsw(base, port->port.xmit_buf+port->xmit_tail, word_count);
+ port->xmit_tail = (port->xmit_tail
+ + (word_count << 1)) & (SERIAL_XMIT_SIZE - 1);
txcount -= (word_count << 1);
port->xmit_cnt -= (word_count << 1);
if (cnt & 0x0001) {
residue = YES;
- wrd = port->xmit_buf[port->xmit_tail];
- port->xmit_tail = (port->xmit_tail + 1) & (SERIAL_XMIT_SIZE - 1);
+ wrd = port->port.xmit_buf[port->xmit_tail];
+ port->xmit_tail = (port->xmit_tail + 1)
+ & (SERIAL_XMIT_SIZE - 1);
port->xmit_cnt--;
txcount--;
}
if (port->xmit_cnt <= 0)
port->status &= ~ISI_TXOK;
if (port->xmit_cnt <= WAKEUP_CHARS)
- schedule_work(&port->bh_tqueue);
- unlock_card(&isi_card[card]);
+ tty_wakeup(tty);
}
+put_unlock:
+ tty_kref_put(tty);
+unlock:
+ spin_unlock_irqrestore(&isi_card[card].card_lock, flags);
/* schedule another tx for hopefully in about 10ms */
sched_again:
- if (!re_schedule)
- return;
- init_timer(&tx);
- tx.expires = jiffies + HZ/100;
- tx.data = 0;
- tx.function = isicom_tx;
- add_timer(&tx);
-
- return;
-}
-
-/* Interrupt handlers */
-
-
-static void isicom_bottomhalf(void *data)
-{
- struct isi_port *port = (struct isi_port *) data;
- struct tty_struct *tty = port->tty;
-
- if (!tty)
- return;
-
- tty_wakeup(tty);
- wake_up_interruptible(&tty->write_wait);
+ mod_timer(&tx, jiffies + msecs_to_jiffies(10));
}
/*
* Main interrupt handler routine
*/
-static irqreturn_t isicom_interrupt(int irq, void *dev_id,
- struct pt_regs *regs)
+static irqreturn_t isicom_interrupt(int irq, void *dev_id)
{
- struct isi_board *card;
+ struct isi_board *card = dev_id;
struct isi_port *port;
struct tty_struct *tty;
- unsigned short base, header, word_count, count;
- unsigned char channel;
+ unsigned long base;
+ u16 header, word_count, count, channel;
short byte_count;
unsigned char *rp;
- card = (struct isi_board *) dev_id;
-
if (!card || !(card->status & FIRMWARE_LOADED))
return IRQ_NONE;
base = card->base;
+
+ /* did the card interrupt us? */
+ if (!(inw(base + 0x0e) & 0x02))
+ return IRQ_NONE;
+
spin_lock(&card->card_lock);
- if (card->isa == NO) {
- /*
- * disable any interrupts from the PCI card and lower the
- * interrupt line
- */
- outw(0x8000, base+0x04);
- ClearInterrupt(base);
- }
+ /*
+ * disable any interrupts from the PCI card and lower the
+ * interrupt line
+ */
+ outw(0x8000, base+0x04);
+ ClearInterrupt(base);
inw(base); /* get the dummy word out */
header = inw(base);
byte_count = header & 0xff;
if (channel + 1 > card->port_count) {
- printk(KERN_WARNING "ISICOM: isicom_interrupt(0x%x): %d(channel) > port_count.\n",
- base, channel+1);
- if (card->isa)
- ClearInterrupt(base);
- else
- outw(0x0000, base+0x04); /* enable interrupts */
+ printk(KERN_WARNING "ISICOM: isicom_interrupt(0x%lx): "
+ "%d(channel) > port_count.\n", base, channel+1);
+ outw(0x0000, base+0x04); /* enable interrupts */
spin_unlock(&card->card_lock);
return IRQ_HANDLED;
}
port = card->ports + channel;
- if (!(port->flags & ASYNC_INITIALIZED)) {
- if (card->isa)
- ClearInterrupt(base);
- else
- outw(0x0000, base+0x04); /* enable interrupts */
+ if (!(port->port.flags & ASYNC_INITIALIZED)) {
+ outw(0x0000, base+0x04); /* enable interrupts */
+ spin_unlock(&card->card_lock);
return IRQ_HANDLED;
}
- tty = port->tty;
+ tty = tty_port_tty_get(&port->port);
if (tty == NULL) {
word_count = byte_count >> 1;
- while(byte_count > 1) {
+ while (byte_count > 1) {
inw(base);
byte_count -= 2;
}
if (byte_count & 0x01)
inw(base);
- if (card->isa == YES)
- ClearInterrupt(base);
- else
- outw(0x0000, base+0x04); /* enable interrupts */
+ outw(0x0000, base+0x04); /* enable interrupts */
spin_unlock(&card->card_lock);
return IRQ_HANDLED;
}
if (header & 0x8000) { /* Status Packet */
header = inw(base);
- switch(header & 0xff) {
+ switch (header & 0xff) {
case 0: /* Change in EIA signals */
-
- if (port->flags & ASYNC_CHECK_CD) {
+ if (port->port.flags & ASYNC_CHECK_CD) {
if (port->status & ISI_DCD) {
if (!(header & ISI_DCD)) {
/* Carrier has been lost */
-#ifdef ISICOM_DEBUG
- printk(KERN_DEBUG "ISICOM: interrupt: DCD->low.\n");
-#endif
+ pr_dbg("interrupt: DCD->low.\n"
+ );
port->status &= ~ISI_DCD;
- schedule_work(&port->hangup_tq);
- }
- }
- else {
- if (header & ISI_DCD) {
- /* Carrier has been detected */
-#ifdef ISICOM_DEBUG
- printk(KERN_DEBUG "ISICOM: interrupt: DCD->high.\n");
-#endif
- port->status |= ISI_DCD;
- wake_up_interruptible(&port->open_wait);
+ tty_hangup(tty);
}
+ } else if (header & ISI_DCD) {
+ /* Carrier has been detected */
+ pr_dbg("interrupt: DCD->high.\n");
+ port->status |= ISI_DCD;
+ wake_up_interruptible(&port->port.open_wait);
}
- }
- else {
+ } else {
if (header & ISI_DCD)
port->status |= ISI_DCD;
else
port->status &= ~ISI_DCD;
}
- if (port->flags & ASYNC_CTS_FLOW) {
- if (port->tty->hw_stopped) {
+ if (port->port.flags & ASYNC_CTS_FLOW) {
+ if (tty->hw_stopped) {
if (header & ISI_CTS) {
- port->tty->hw_stopped = 0;
+ port->port.tty->hw_stopped = 0;
/* start tx ing */
- port->status |= (ISI_TXOK | ISI_CTS);
- schedule_work(&port->bh_tqueue);
- }
- }
- else {
- if (!(header & ISI_CTS)) {
- port->tty->hw_stopped = 1;
- /* stop tx ing */
- port->status &= ~(ISI_TXOK | ISI_CTS);
+ port->status |= (ISI_TXOK
+ | ISI_CTS);
+ tty_wakeup(tty);
}
+ } else if (!(header & ISI_CTS)) {
+ tty->hw_stopped = 1;
+ /* stop tx ing */
+ port->status &= ~(ISI_TXOK | ISI_CTS);
}
- }
- else {
+ } else {
if (header & ISI_CTS)
port->status |= ISI_CTS;
else
break;
- case 1: /* Received Break !!! */
+ case 1: /* Received Break !!! */
tty_insert_flip_char(tty, 0, TTY_BREAK);
- if (port->flags & ASYNC_SAK)
+ if (port->port.flags & ASYNC_SAK)
do_SAK(tty);
tty_flip_buffer_push(tty);
break;
case 2: /* Statistics */
- printk(KERN_DEBUG "ISICOM: isicom_interrupt: stats!!!.\n");
+ pr_dbg("isicom_interrupt: stats!!!.\n");
break;
default:
- printk(KERN_WARNING "ISICOM: Intr: Unknown code in status packet.\n");
+ pr_dbg("Intr: Unknown code in status packet.\n");
break;
}
- }
- else { /* Data Packet */
+ } else { /* Data Packet */
count = tty_prepare_flip_string(tty, &rp, byte_count & ~1);
-#ifdef ISICOM_DEBUG
- printk(KERN_DEBUG "ISICOM: Intr: Can rx %d of %d bytes.\n",
- count, byte_count);
-#endif
+ pr_dbg("Intr: Can rx %d of %d bytes.\n", count, byte_count);
word_count = count >> 1;
insw(base, rp, word_count);
byte_count -= (word_count << 1);
if (count & 0x0001) {
- tty_insert_flip_char(tty, inw(base) & 0xff, TTY_NORMAL);
+ tty_insert_flip_char(tty, inw(base) & 0xff,
+ TTY_NORMAL);
byte_count -= 2;
}
if (byte_count > 0) {
- printk(KERN_DEBUG "ISICOM: Intr(0x%x:%d): Flip buffer overflow! dropping bytes...\n",
- base, channel+1);
- while(byte_count > 0) { /* drain out unread xtra data */
+ pr_dbg("Intr(0x%lx:%d): Flip buffer overflow! dropping "
+ "bytes...\n", base, channel + 1);
+ /* drain out unread xtra data */
+ while (byte_count > 0) {
inw(base);
byte_count -= 2;
}
}
tty_flip_buffer_push(tty);
}
- if (card->isa == YES)
- ClearInterrupt(base);
- else
- outw(0x0000, base+0x04); /* enable interrupts */
+ outw(0x0000, base+0x04); /* enable interrupts */
+ spin_unlock(&card->card_lock);
+ tty_kref_put(tty);
+
return IRQ_HANDLED;
}
-static void isicom_config_port(struct isi_port *port)
+static void isicom_config_port(struct tty_struct *tty)
{
+ struct isi_port *port = tty->driver_data;
struct isi_board *card = port->card;
- struct tty_struct *tty;
unsigned long baud;
- unsigned short channel_setup, base = card->base;
- unsigned short channel = port->channel, shift_count = card->shift_count;
+ unsigned long base = card->base;
+ u16 channel_setup, channel = port->channel,
+ shift_count = card->shift_count;
unsigned char flow_ctrl;
- if (!(tty = port->tty) || !tty->termios)
- return;
+ /* FIXME: Switch to new tty baud API */
baud = C_BAUD(tty);
if (baud & CBAUDEX) {
baud &= ~CBAUDEX;
* respectively.
*/
- if (baud < 1 || baud > 2)
- port->tty->termios->c_cflag &= ~CBAUDEX;
+ /* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */
+ if (baud < 1 || baud > 4)
+ tty->termios->c_cflag &= ~CBAUDEX;
else
baud += 15;
}
* the 'setserial' utility.
*/
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
baud++; /* 57.6 Kbps */
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- baud +=2; /* 115 Kbps */
+ if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ baud += 2; /* 115 Kbps */
+ if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ baud += 3; /* 230 kbps*/
+ if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ baud += 4; /* 460 kbps*/
}
if (linuxb_to_isib[baud] == -1) {
/* hang up */
drop_dtr(port);
return;
- }
- else
+ } else
raise_dtr(port);
- if (lock_card(card)) {
- outw(0x8000 | (channel << shift_count) |0x03, base);
+ if (WaitTillCardIsFree(base) == 0) {
+ outw(0x8000 | (channel << shift_count) | 0x03, base);
outw(linuxb_to_isib[baud] << 8 | 0x03, base);
channel_setup = 0;
- switch(C_CSIZE(tty)) {
+ switch (C_CSIZE(tty)) {
case CS5:
channel_setup |= ISICOM_CS5;
break;
}
outw(channel_setup, base);
InterruptTheCard(base);
- unlock_card(card);
}
if (C_CLOCAL(tty))
- port->flags &= ~ASYNC_CHECK_CD;
+ port->port.flags &= ~ASYNC_CHECK_CD;
else
- port->flags |= ASYNC_CHECK_CD;
+ port->port.flags |= ASYNC_CHECK_CD;
/* flow control settings ...*/
flow_ctrl = 0;
- port->flags &= ~ASYNC_CTS_FLOW;
+ port->port.flags &= ~ASYNC_CTS_FLOW;
if (C_CRTSCTS(tty)) {
- port->flags |= ASYNC_CTS_FLOW;
+ port->port.flags |= ASYNC_CTS_FLOW;
flow_ctrl |= ISICOM_CTSRTS;
}
if (I_IXON(tty))
if (I_IXOFF(tty))
flow_ctrl |= ISICOM_INITIATE_XONXOFF;
- if (lock_card(card)) {
- outw(0x8000 | (channel << shift_count) |0x04, base);
+ if (WaitTillCardIsFree(base) == 0) {
+ outw(0x8000 | (channel << shift_count) | 0x04, base);
outw(flow_ctrl << 8 | 0x05, base);
outw((STOP_CHAR(tty)) << 8 | (START_CHAR(tty)), base);
InterruptTheCard(base);
- unlock_card(card);
}
/* rx enabled -> enable port for rx on the card */
}
port = bp->ports;
bp->status |= BOARD_ACTIVE;
- spin_unlock_irqrestore(&bp->card_lock, flags);
for (channel = 0; channel < bp->port_count; channel++, port++)
drop_dtr_rts(port);
- return;
+ spin_unlock_irqrestore(&bp->card_lock, flags);
}
-static int isicom_setup_port(struct isi_port *port)
+static int isicom_setup_port(struct tty_struct *tty)
{
+ struct isi_port *port = tty->driver_data;
struct isi_board *card = port->card;
unsigned long flags;
- if (port->flags & ASYNC_INITIALIZED) {
+ if (port->port.flags & ASYNC_INITIALIZED)
return 0;
- }
- if (!port->xmit_buf) {
- unsigned long page;
-
- if (!(page = get_zeroed_page(GFP_KERNEL)))
- return -ENOMEM;
-
- if (port->xmit_buf) {
- free_page(page);
- return -ERESTARTSYS;
- }
- port->xmit_buf = (unsigned char *) page;
- }
+ if (tty_port_alloc_xmit_buf(&port->port) < 0)
+ return -ENOMEM;
spin_lock_irqsave(&card->card_lock, flags);
- if (port->tty)
- clear_bit(TTY_IO_ERROR, &port->tty->flags);
- if (port->count == 1)
+ clear_bit(TTY_IO_ERROR, &tty->flags);
+ if (port->port.count == 1)
card->count++;
port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
/* discard any residual data */
- kill_queue(port, ISICOM_KILLTX | ISICOM_KILLRX);
+ if (WaitTillCardIsFree(card->base) == 0) {
+ outw(0x8000 | (port->channel << card->shift_count) | 0x02,
+ card->base);
+ outw(((ISICOM_KILLTX | ISICOM_KILLRX) << 8) | 0x06, card->base);
+ InterruptTheCard(card->base);
+ }
- isicom_config_port(port);
- port->flags |= ASYNC_INITIALIZED;
+ isicom_config_port(tty);
+ port->port.flags |= ASYNC_INITIALIZED;
spin_unlock_irqrestore(&card->card_lock, flags);
return 0;
}
-static int block_til_ready(struct tty_struct *tty, struct file *filp, struct isi_port *port)
+static int block_til_ready(struct tty_struct *tty, struct file *filp,
+ struct isi_port *port)
{
struct isi_board *card = port->card;
int do_clocal = 0, retval;
/* block if port is in the process of being closed */
- if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
-#ifdef ISICOM_DEBUG
- printk(KERN_DEBUG "ISICOM: block_til_ready: close in progress.\n");
-#endif
- interruptible_sleep_on(&port->close_wait);
- if (port->flags & ASYNC_HUP_NOTIFY)
+ if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) {
+ pr_dbg("block_til_ready: close in progress.\n");
+ interruptible_sleep_on(&port->port.close_wait);
+ if (port->port.flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
else
return -ERESTARTSYS;
/* if non-blocking mode is set ... */
- if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) {
-#ifdef ISICOM_DEBUG
- printk(KERN_DEBUG "ISICOM: block_til_ready: non-block mode.\n");
-#endif
- port->flags |= ASYNC_NORMAL_ACTIVE;
+ if ((filp->f_flags & O_NONBLOCK) ||
+ (tty->flags & (1 << TTY_IO_ERROR))) {
+ pr_dbg("block_til_ready: non-block mode.\n");
+ port->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
/* block waiting for DCD to be asserted, and while
callout dev is busy */
retval = 0;
- add_wait_queue(&port->open_wait, &wait);
+ add_wait_queue(&port->port.open_wait, &wait);
spin_lock_irqsave(&card->card_lock, flags);
if (!tty_hung_up_p(filp))
- port->count--;
- port->blocked_open++;
+ port->port.count--;
+ port->port.blocked_open++;
spin_unlock_irqrestore(&card->card_lock, flags);
while (1) {
raise_dtr_rts(port);
set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
- if (port->flags & ASYNC_HUP_NOTIFY)
+ if (tty_hung_up_p(filp) || !(port->port.flags & ASYNC_INITIALIZED)) {
+ if (port->port.flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
break;
}
- if (!(port->flags & ASYNC_CLOSING) &&
+ if (!(port->port.flags & ASYNC_CLOSING) &&
(do_clocal || (port->status & ISI_DCD))) {
break;
}
schedule();
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
+ remove_wait_queue(&port->port.open_wait, &wait);
spin_lock_irqsave(&card->card_lock, flags);
if (!tty_hung_up_p(filp))
- port->count++;
- port->blocked_open--;
+ port->port.count++;
+ port->port.blocked_open--;
spin_unlock_irqrestore(&card->card_lock, flags);
if (retval)
return retval;
- port->flags |= ASYNC_NORMAL_ACTIVE;
+ port->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
{
struct isi_port *port;
struct isi_board *card;
- unsigned int line, board;
- int error;
+ unsigned int board;
+ int error, line;
line = tty->index;
if (line < 0 || line > PORT_COUNT-1)
isicom_setup_board(card);
- port->count++;
+ port->port.count++;
tty->driver_data = port;
- port->tty = tty;
- if ((error = isicom_setup_port(port))!=0)
- return error;
- if ((error = block_til_ready(tty, filp, port))!=0)
- return error;
-
- return 0;
+ tty_port_tty_set(&port->port, tty);
+ error = isicom_setup_port(tty);
+ if (error == 0)
+ error = block_til_ready(tty, filp, port);
+ return error;
}
/* close et all */
static inline void isicom_shutdown_board(struct isi_board *bp)
{
- unsigned long flags;
-
- spin_lock_irqsave(&bp->card_lock, flags);
- if (bp->status & BOARD_ACTIVE) {
+ if (bp->status & BOARD_ACTIVE)
bp->status &= ~BOARD_ACTIVE;
- }
- spin_unlock_irqrestore(&bp->card_lock, flags);
}
+/* card->lock HAS to be held */
static void isicom_shutdown_port(struct isi_port *port)
{
struct isi_board *card = port->card;
struct tty_struct *tty;
- unsigned long flags;
- tty = port->tty;
+ tty = tty_port_tty_get(&port->port);
- spin_lock_irqsave(&card->card_lock, flags);
- if (!(port->flags & ASYNC_INITIALIZED)) {
- spin_unlock_irqrestore(&card->card_lock, flags);
+ if (!(port->port.flags & ASYNC_INITIALIZED)) {
+ tty_kref_put(tty);
return;
}
- if (port->xmit_buf) {
- free_page((unsigned long) port->xmit_buf);
- port->xmit_buf = NULL;
- }
- port->flags &= ~ASYNC_INITIALIZED;
+
+ tty_port_free_xmit_buf(&port->port);
+ port->port.flags &= ~ASYNC_INITIALIZED;
/* 3rd October 2000 : Vinayak P Risbud */
- port->tty = NULL;
- spin_unlock_irqrestore(&card->card_lock, flags);
+ tty_port_tty_set(&port->port, NULL);
/*Fix done by Anil .S on 30-04-2001
remote login through isi port has dtr toggle problem
set_bit(TTY_IO_ERROR, &tty->flags);
if (--card->count < 0) {
- printk(KERN_DEBUG "ISICOM: isicom_shutdown_port: bad board(0x%x) count %d.\n",
+ pr_dbg("isicom_shutdown_port: bad board(0x%lx) count %d.\n",
card->base, card->count);
card->count = 0;
}
- /* last port was closed , shutdown that boad too */
+ /* last port was closed, shutdown that boad too */
if (C_HUPCL(tty)) {
if (!card->count)
isicom_shutdown_board(card);
}
}
-static void isicom_close(struct tty_struct *tty, struct file *filp)
+static void isicom_flush_buffer(struct tty_struct *tty)
{
- struct isi_port *port = (struct isi_port *) tty->driver_data;
+ struct isi_port *port = tty->driver_data;
struct isi_board *card = port->card;
unsigned long flags;
+ if (isicom_paranoia_check(port, tty->name, "isicom_flush_buffer"))
+ return;
+
+ spin_lock_irqsave(&card->card_lock, flags);
+ port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
+ spin_unlock_irqrestore(&card->card_lock, flags);
+
+ tty_wakeup(tty);
+}
+
+static void isicom_close(struct tty_struct *tty, struct file *filp)
+{
+ struct isi_port *port = tty->driver_data;
+ struct isi_board *card;
+ unsigned long flags;
+
if (!port)
return;
+ card = port->card;
if (isicom_paranoia_check(port, tty->name, "isicom_close"))
return;
-#ifdef ISICOM_DEBUG
- printk(KERN_DEBUG "ISICOM: Close start!!!.\n");
-#endif
+ pr_dbg("Close start!!!.\n");
spin_lock_irqsave(&card->card_lock, flags);
if (tty_hung_up_p(filp)) {
return;
}
- if (tty->count == 1 && port->count != 1) {
- printk(KERN_WARNING "ISICOM:(0x%x) isicom_close: bad port count"
- "tty->count = 1 port count = %d.\n",
- card->base, port->count);
- port->count = 1;
+ if (tty->count == 1 && port->port.count != 1) {
+ printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port "
+ "count tty->count = 1 port count = %d.\n",
+ card->base, port->port.count);
+ port->port.count = 1;
}
- if (--port->count < 0) {
- printk(KERN_WARNING "ISICOM:(0x%x) isicom_close: bad port count for"
- "channel%d = %d", card->base, port->channel,
- port->count);
- port->count = 0;
+ if (--port->port.count < 0) {
+ printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port "
+ "count for channel%d = %d", card->base, port->channel,
+ port->port.count);
+ port->port.count = 0;
}
- if (port->count) {
+ if (port->port.count) {
spin_unlock_irqrestore(&card->card_lock, flags);
return;
}
- port->flags |= ASYNC_CLOSING;
+ port->port.flags |= ASYNC_CLOSING;
tty->closing = 1;
spin_unlock_irqrestore(&card->card_lock, flags);
- if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, port->closing_wait);
+ if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, port->port.closing_wait);
/* indicate to the card that no more data can be received
on this port */
spin_lock_irqsave(&card->card_lock, flags);
- if (port->flags & ASYNC_INITIALIZED) {
+ if (port->port.flags & ASYNC_INITIALIZED) {
card->port_status &= ~(1 << port->channel);
outw(card->port_status, card->base + 0x02);
}
isicom_shutdown_port(port);
spin_unlock_irqrestore(&card->card_lock, flags);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ isicom_flush_buffer(tty);
tty_ldisc_flush(tty);
spin_lock_irqsave(&card->card_lock, flags);
tty->closing = 0;
- if (port->blocked_open) {
+ if (port->port.blocked_open) {
spin_unlock_irqrestore(&card->card_lock, flags);
- if (port->close_delay) {
-#ifdef ISICOM_DEBUG
- printk(KERN_DEBUG "ISICOM: scheduling until time out.\n");
-#endif
- msleep_interruptible(jiffies_to_msecs(port->close_delay));
+ if (port->port.close_delay) {
+ pr_dbg("scheduling until time out.\n");
+ msleep_interruptible(
+ jiffies_to_msecs(port->port.close_delay));
}
spin_lock_irqsave(&card->card_lock, flags);
- wake_up_interruptible(&port->open_wait);
+ wake_up_interruptible(&port->port.open_wait);
}
- port->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
- wake_up_interruptible(&port->close_wait);
+ port->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
+ wake_up_interruptible(&port->port.close_wait);
spin_unlock_irqrestore(&card->card_lock, flags);
}
static int isicom_write(struct tty_struct *tty, const unsigned char *buf,
int count)
{
- struct isi_port *port = (struct isi_port *) tty->driver_data;
+ struct isi_port *port = tty->driver_data;
struct isi_board *card = port->card;
unsigned long flags;
int cnt, total = 0;
if (isicom_paranoia_check(port, tty->name, "isicom_write"))
return 0;
- if (!tty || !port->xmit_buf || !tmp_buf)
- return 0;
-
spin_lock_irqsave(&card->card_lock, flags);
- while(1) {
- cnt = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - port->xmit_head));
+ while (1) {
+ cnt = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt
+ - 1, SERIAL_XMIT_SIZE - port->xmit_head));
if (cnt <= 0)
break;
- memcpy(port->xmit_buf + port->xmit_head, buf, cnt);
- port->xmit_head = (port->xmit_head + cnt) & (SERIAL_XMIT_SIZE - 1);
+ memcpy(port->port.xmit_buf + port->xmit_head, buf, cnt);
+ port->xmit_head = (port->xmit_head + cnt) & (SERIAL_XMIT_SIZE
+ - 1);
port->xmit_cnt += cnt;
buf += cnt;
count -= cnt;
}
/* put_char et all */
-static void isicom_put_char(struct tty_struct *tty, unsigned char ch)
+static int isicom_put_char(struct tty_struct *tty, unsigned char ch)
{
- struct isi_port *port = (struct isi_port *) tty->driver_data;
+ struct isi_port *port = tty->driver_data;
struct isi_board *card = port->card;
unsigned long flags;
if (isicom_paranoia_check(port, tty->name, "isicom_put_char"))
- return;
-
- if (!tty || !port->xmit_buf)
- return;
+ return 0;
spin_lock_irqsave(&card->card_lock, flags);
if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) {
spin_unlock_irqrestore(&card->card_lock, flags);
- return;
+ return 0;
}
- port->xmit_buf[port->xmit_head++] = ch;
+ port->port.xmit_buf[port->xmit_head++] = ch;
port->xmit_head &= (SERIAL_XMIT_SIZE - 1);
port->xmit_cnt++;
spin_unlock_irqrestore(&card->card_lock, flags);
+ return 1;
}
/* flush_chars et all */
static void isicom_flush_chars(struct tty_struct *tty)
{
- struct isi_port *port = (struct isi_port *) tty->driver_data;
+ struct isi_port *port = tty->driver_data;
if (isicom_paranoia_check(port, tty->name, "isicom_flush_chars"))
return;
- if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || !port->xmit_buf)
+ if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
+ !port->port.xmit_buf)
return;
/* this tells the transmitter to consider this port for
/* write_room et all */
static int isicom_write_room(struct tty_struct *tty)
{
- struct isi_port *port = (struct isi_port *) tty->driver_data;
+ struct isi_port *port = tty->driver_data;
int free;
if (isicom_paranoia_check(port, tty->name, "isicom_write_room"))
/* chars_in_buffer et all */
static int isicom_chars_in_buffer(struct tty_struct *tty)
{
- struct isi_port *port = (struct isi_port *) tty->driver_data;
+ struct isi_port *port = tty->driver_data;
if (isicom_paranoia_check(port, tty->name, "isicom_chars_in_buffer"))
return 0;
return port->xmit_cnt;
}
/* ioctl et all */
-static inline void isicom_send_break(struct isi_port *port, unsigned long length)
+static int isicom_send_break(struct tty_struct *tty, int length)
{
+ struct isi_port *port = tty->driver_data;
struct isi_board *card = port->card;
- unsigned short base = card->base;
+ unsigned long base = card->base;
+
+ if (length == -1)
+ return -EOPNOTSUPP;
if (!lock_card(card))
- return;
+ return -EINVAL;
outw(0x8000 | ((port->channel) << (card->shift_count)) | 0x3, base);
outw((length & 0xff) << 8 | 0x00, base);
InterruptTheCard(base);
unlock_card(card);
+ return 0;
}
static int isicom_tiocmget(struct tty_struct *tty, struct file *file)
{
- struct isi_port *port = (struct isi_port *) tty->driver_data;
+ struct isi_port *port = tty->driver_data;
/* just send the port status */
- unsigned short status = port->status;
+ u16 status = port->status;
if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
return -ENODEV;
static int isicom_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
- struct isi_port *port = (struct isi_port *) tty->driver_data;
+ struct isi_port *port = tty->driver_data;
+ unsigned long flags;
if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
return -ENODEV;
+ spin_lock_irqsave(&port->card->card_lock, flags);
if (set & TIOCM_RTS)
raise_rts(port);
if (set & TIOCM_DTR)
drop_rts(port);
if (clear & TIOCM_DTR)
drop_dtr(port);
+ spin_unlock_irqrestore(&port->card->card_lock, flags);
return 0;
}
-static int isicom_set_serial_info(struct isi_port *port,
- struct serial_struct __user *info)
+static int isicom_set_serial_info(struct tty_struct *tty,
+ struct serial_struct __user *info)
{
+ struct isi_port *port = tty->driver_data;
struct serial_struct newinfo;
int reconfig_port;
if (copy_from_user(&newinfo, info, sizeof(newinfo)))
return -EFAULT;
- reconfig_port = ((port->flags & ASYNC_SPD_MASK) !=
+ lock_kernel();
+
+ reconfig_port = ((port->port.flags & ASYNC_SPD_MASK) !=
(newinfo.flags & ASYNC_SPD_MASK));
if (!capable(CAP_SYS_ADMIN)) {
- if ((newinfo.close_delay != port->close_delay) ||
- (newinfo.closing_wait != port->closing_wait) ||
+ if ((newinfo.close_delay != port->port.close_delay) ||
+ (newinfo.closing_wait != port->port.closing_wait) ||
((newinfo.flags & ~ASYNC_USR_MASK) !=
- (port->flags & ~ASYNC_USR_MASK)))
+ (port->port.flags & ~ASYNC_USR_MASK))) {
+ unlock_kernel();
return -EPERM;
- port->flags = ((port->flags & ~ ASYNC_USR_MASK) |
+ }
+ port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
(newinfo.flags & ASYNC_USR_MASK));
- }
- else {
- port->close_delay = newinfo.close_delay;
- port->closing_wait = newinfo.closing_wait;
- port->flags = ((port->flags & ~ASYNC_FLAGS) |
+ } else {
+ port->port.close_delay = newinfo.close_delay;
+ port->port.closing_wait = newinfo.closing_wait;
+ port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
(newinfo.flags & ASYNC_FLAGS));
}
if (reconfig_port) {
- isicom_config_port(port);
+ unsigned long flags;
+ spin_lock_irqsave(&port->card->card_lock, flags);
+ isicom_config_port(tty);
+ spin_unlock_irqrestore(&port->card->card_lock, flags);
}
+ unlock_kernel();
return 0;
}
{
struct serial_struct out_info;
+ lock_kernel();
memset(&out_info, 0, sizeof(out_info));
/* out_info.type = ? */
out_info.line = port - isi_ports;
out_info.port = port->card->base;
out_info.irq = port->card->irq;
- out_info.flags = port->flags;
+ out_info.flags = port->port.flags;
/* out_info.baud_base = ? */
- out_info.close_delay = port->close_delay;
- out_info.closing_wait = port->closing_wait;
+ out_info.close_delay = port->port.close_delay;
+ out_info.closing_wait = port->port.closing_wait;
+ unlock_kernel();
if (copy_to_user(info, &out_info, sizeof(out_info)))
return -EFAULT;
return 0;
static int isicom_ioctl(struct tty_struct *tty, struct file *filp,
unsigned int cmd, unsigned long arg)
{
- struct isi_port *port = (struct isi_port *) tty->driver_data;
+ struct isi_port *port = tty->driver_data;
void __user *argp = (void __user *)arg;
- int retval;
if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
return -ENODEV;
- switch(cmd) {
- case TCSBRK:
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- if (!arg)
- isicom_send_break(port, HZ/4);
- return 0;
-
- case TCSBRKP:
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- isicom_send_break(port, arg ? arg * (HZ/10) : HZ/4);
- return 0;
-
- case TIOCGSOFTCAR:
- return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp);
-
- case TIOCSSOFTCAR:
- if (get_user(arg, (unsigned long __user *) argp))
- return -EFAULT;
- tty->termios->c_cflag =
- ((tty->termios->c_cflag & ~CLOCAL) |
- (arg ? CLOCAL : 0));
- return 0;
-
+ switch (cmd) {
case TIOCGSERIAL:
return isicom_get_serial_info(port, argp);
case TIOCSSERIAL:
- return isicom_set_serial_info(port, argp);
+ return isicom_set_serial_info(tty, argp);
default:
return -ENOIOCTLCMD;
/* set_termios et all */
static void isicom_set_termios(struct tty_struct *tty,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
- struct isi_port *port = (struct isi_port *) tty->driver_data;
+ struct isi_port *port = tty->driver_data;
+ unsigned long flags;
if (isicom_paranoia_check(port, tty->name, "isicom_set_termios"))
return;
tty->termios->c_iflag == old_termios->c_iflag)
return;
- isicom_config_port(port);
+ spin_lock_irqsave(&port->card->card_lock, flags);
+ isicom_config_port(tty);
+ spin_unlock_irqrestore(&port->card->card_lock, flags);
if ((old_termios->c_cflag & CRTSCTS) &&
!(tty->termios->c_cflag & CRTSCTS)) {
/* throttle et all */
static void isicom_throttle(struct tty_struct *tty)
{
- struct isi_port *port = (struct isi_port *) tty->driver_data;
+ struct isi_port *port = tty->driver_data;
struct isi_board *card = port->card;
if (isicom_paranoia_check(port, tty->name, "isicom_throttle"))
/* unthrottle et all */
static void isicom_unthrottle(struct tty_struct *tty)
{
- struct isi_port *port = (struct isi_port *) tty->driver_data;
+ struct isi_port *port = tty->driver_data;
struct isi_board *card = port->card;
if (isicom_paranoia_check(port, tty->name, "isicom_unthrottle"))
/* stop et all */
static void isicom_stop(struct tty_struct *tty)
{
- struct isi_port *port = (struct isi_port *) tty->driver_data;
+ struct isi_port *port = tty->driver_data;
if (isicom_paranoia_check(port, tty->name, "isicom_stop"))
return;
/* start et all */
static void isicom_start(struct tty_struct *tty)
{
- struct isi_port *port = (struct isi_port *) tty->driver_data;
+ struct isi_port *port = tty->driver_data;
if (isicom_paranoia_check(port, tty->name, "isicom_start"))
return;
port->status |= ISI_TXOK;
}
-/* hangup et all */
-static void do_isicom_hangup(void *data)
-{
- struct isi_port *port = (struct isi_port *) data;
- struct tty_struct *tty;
-
- tty = port->tty;
- if (tty)
- tty_hangup(tty);
-}
-
static void isicom_hangup(struct tty_struct *tty)
{
- struct isi_port *port = (struct isi_port *) tty->driver_data;
+ struct isi_port *port = tty->driver_data;
+ unsigned long flags;
if (isicom_paranoia_check(port, tty->name, "isicom_hangup"))
return;
+ spin_lock_irqsave(&port->card->card_lock, flags);
isicom_shutdown_port(port);
- port->count = 0;
- port->flags &= ~ASYNC_NORMAL_ACTIVE;
- port->tty = NULL;
- wake_up_interruptible(&port->open_wait);
-}
-
-/* flush_buffer et all */
-static void isicom_flush_buffer(struct tty_struct *tty)
-{
- struct isi_port *port = (struct isi_port *) tty->driver_data;
- struct isi_board *card = port->card;
- unsigned long flags;
+ spin_unlock_irqrestore(&port->card->card_lock, flags);
- if (isicom_paranoia_check(port, tty->name, "isicom_flush_buffer"))
- return;
-
- spin_lock_irqsave(&card->card_lock, flags);
- port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
- spin_unlock_irqrestore(&card->card_lock, flags);
-
- wake_up_interruptible(&tty->write_wait);
- tty_wakeup(tty);
+ port->port.count = 0;
+ port->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+ tty_port_tty_set(&port->port, NULL);
+ wake_up_interruptible(&port->port.open_wait);
}
-static int __devinit register_ioregion(void)
-{
- int count, done=0;
- for (count=0; count < BOARD_COUNT; count++ ) {
- if (isi_card[count].base)
- if (!request_region(isi_card[count].base,16,ISICOM_NAME)) {
- printk(KERN_DEBUG "ISICOM: I/O Region 0x%x-0x%x is busy. Card%d will be disabled.\n",
- isi_card[count].base,isi_card[count].base+15,count+1);
- isi_card[count].base=0;
- done++;
- }
- }
- return done;
-}
-
-static void unregister_ioregion(void)
-{
- int count;
- for (count=0; count < BOARD_COUNT; count++ )
- if (isi_card[count].base) {
- release_region(isi_card[count].base,16);
-#ifdef ISICOM_DEBUG
- printk(KERN_DEBUG "ISICOM: I/O Region 0x%x-0x%x released for Card%d.\n",isi_card[count].base,isi_card[count].base+15,count+1);
-#endif
- }
-}
+/*
+ * Driver init and deinit functions
+ */
-static struct tty_operations isicom_ops = {
+static const struct tty_operations isicom_ops = {
.open = isicom_open,
.close = isicom_close,
.write = isicom_write,
.flush_buffer = isicom_flush_buffer,
.tiocmget = isicom_tiocmget,
.tiocmset = isicom_tiocmset,
+ .break_ctl = isicom_send_break,
};
-static int __devinit register_drivers(void)
+static int __devinit reset_card(struct pci_dev *pdev,
+ const unsigned int card, unsigned int *signature)
{
- int error;
+ struct isi_board *board = pci_get_drvdata(pdev);
+ unsigned long base = board->base;
+ unsigned int sig, portcount = 0;
+ int retval = 0;
- /* tty driver structure initialization */
- isicom_normal = alloc_tty_driver(PORT_COUNT);
- if (!isicom_normal)
- return -ENOMEM;
+ dev_dbg(&pdev->dev, "ISILoad:Resetting Card%d at 0x%lx\n", card + 1,
+ base);
- isicom_normal->owner = THIS_MODULE;
- isicom_normal->name = "ttyM";
- isicom_normal->devfs_name = "isicom/";
- isicom_normal->major = ISICOM_NMAJOR;
- isicom_normal->minor_start = 0;
- isicom_normal->type = TTY_DRIVER_TYPE_SERIAL;
- isicom_normal->subtype = SERIAL_TYPE_NORMAL;
- isicom_normal->init_termios = tty_std_termios;
- isicom_normal->init_termios.c_cflag =
- B9600 | CS8 | CREAD | HUPCL |CLOCAL;
- isicom_normal->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(isicom_normal, &isicom_ops);
+ inw(base + 0x8);
- if ((error=tty_register_driver(isicom_normal))!=0) {
- printk(KERN_DEBUG "ISICOM: Couldn't register the dialin driver, error=%d\n",
- error);
- put_tty_driver(isicom_normal);
- return error;
- }
- return 0;
-}
+ msleep(10);
-static void unregister_drivers(void)
-{
- int error = tty_unregister_driver(isicom_normal);
- if (error)
- printk(KERN_DEBUG "ISICOM: couldn't unregister normal driver error=%d.\n",error);
- put_tty_driver(isicom_normal);
-}
+ outw(0, base + 0x8); /* Reset */
-static int __devinit register_isr(void)
-{
- int count, done=0;
- unsigned long irqflags;
-
- for (count=0; count < BOARD_COUNT; count++ ) {
- if (isi_card[count].base) {
- irqflags = (isi_card[count].isa == YES) ?
- SA_INTERRUPT :
- (SA_INTERRUPT | SA_SHIRQ);
-
- if (request_irq(isi_card[count].irq,
- isicom_interrupt,
- irqflags,
- ISICOM_NAME, &isi_card[count])) {
-
- printk(KERN_WARNING "ISICOM: Could not"
- " install handler at Irq %d."
- " Card%d will be disabled.\n",
- isi_card[count].irq, count+1);
-
- release_region(isi_card[count].base,16);
- isi_card[count].base=0;
- }
- else
- done++;
- }
+ msleep(1000);
+
+ sig = inw(base + 0x4) & 0xff;
+
+ if (sig != 0xa5 && sig != 0xbb && sig != 0xcc && sig != 0xdd &&
+ sig != 0xee) {
+ dev_warn(&pdev->dev, "ISILoad:Card%u reset failure (Possible "
+ "bad I/O Port Address 0x%lx).\n", card + 1, base);
+ dev_dbg(&pdev->dev, "Sig=0x%x\n", sig);
+ retval = -EIO;
+ goto end;
}
- return done;
-}
-static void __exit unregister_isr(void)
-{
- int count;
+ msleep(10);
- for (count=0; count < BOARD_COUNT; count++ ) {
- if (isi_card[count].base)
- free_irq(isi_card[count].irq, &isi_card[count]);
+ portcount = inw(base + 0x2);
+ if (!(inw(base + 0xe) & 0x1) || (portcount != 0 && portcount != 4 &&
+ portcount != 8 && portcount != 16)) {
+ dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure.\n",
+ card + 1);
+ retval = -EIO;
+ goto end;
}
+
+ switch (sig) {
+ case 0xa5:
+ case 0xbb:
+ case 0xdd:
+ board->port_count = (portcount == 4) ? 4 : 8;
+ board->shift_count = 12;
+ break;
+ case 0xcc:
+ case 0xee:
+ board->port_count = 16;
+ board->shift_count = 11;
+ break;
+ }
+ dev_info(&pdev->dev, "-Done\n");
+ *signature = sig;
+
+end:
+ return retval;
}
-static int __devinit isicom_init(void)
+static int __devinit load_firmware(struct pci_dev *pdev,
+ const unsigned int index, const unsigned int signature)
{
- int card, channel, base;
- struct isi_port *port;
- unsigned long page;
+ struct isi_board *board = pci_get_drvdata(pdev);
+ const struct firmware *fw;
+ unsigned long base = board->base;
+ unsigned int a;
+ u16 word_count, status;
+ int retval = -EIO;
+ char *name;
+ u8 *data;
+
+ struct stframe {
+ u16 addr;
+ u16 count;
+ u8 data[0];
+ } *frame;
+
+ switch (signature) {
+ case 0xa5:
+ name = "isi608.bin";
+ break;
+ case 0xbb:
+ name = "isi608em.bin";
+ break;
+ case 0xcc:
+ name = "isi616em.bin";
+ break;
+ case 0xdd:
+ name = "isi4608.bin";
+ break;
+ case 0xee:
+ name = "isi4616.bin";
+ break;
+ default:
+ dev_err(&pdev->dev, "Unknown signature.\n");
+ goto end;
+ }
- if (!tmp_buf) {
- page = get_zeroed_page(GFP_KERNEL);
- if (!page) {
-#ifdef ISICOM_DEBUG
- printk(KERN_DEBUG "ISICOM: Couldn't allocate page for tmp_buf.\n");
-#else
- printk(KERN_ERR "ISICOM: Not enough memory...\n");
-#endif
- return 0;
+ retval = request_firmware(&fw, name, &pdev->dev);
+ if (retval)
+ goto end;
+
+ retval = -EIO;
+
+ for (frame = (struct stframe *)fw->data;
+ frame < (struct stframe *)(fw->data + fw->size);
+ frame = (struct stframe *)((u8 *)(frame + 1) +
+ frame->count)) {
+ if (WaitTillCardIsFree(base))
+ goto errrelfw;
+
+ outw(0xf0, base); /* start upload sequence */
+ outw(0x00, base);
+ outw(frame->addr, base); /* lsb of address */
+
+ word_count = frame->count / 2 + frame->count % 2;
+ outw(word_count, base);
+ InterruptTheCard(base);
+
+ udelay(100); /* 0x2f */
+
+ if (WaitTillCardIsFree(base))
+ goto errrelfw;
+
+ status = inw(base + 0x4);
+ if (status != 0) {
+ dev_warn(&pdev->dev, "Card%d rejected load header:\n"
+ KERN_WARNING "Address:0x%x\n"
+ KERN_WARNING "Count:0x%x\n"
+ KERN_WARNING "Status:0x%x\n",
+ index + 1, frame->addr, frame->count, status);
+ goto errrelfw;
}
- tmp_buf = (unsigned char *) page;
- }
+ outsw(base, frame->data, word_count);
- if (!register_ioregion())
- {
- printk(KERN_ERR "ISICOM: All required I/O space found busy.\n");
- free_page((unsigned long)tmp_buf);
- return 0;
- }
- if (register_drivers())
- {
- unregister_ioregion();
- free_page((unsigned long)tmp_buf);
- return 0;
- }
- if (!register_isr())
- {
- unregister_drivers();
- /* ioports already uregistered in register_isr */
- free_page((unsigned long)tmp_buf);
- return 0;
+ InterruptTheCard(base);
+
+ udelay(50); /* 0x0f */
+
+ if (WaitTillCardIsFree(base))
+ goto errrelfw;
+
+ status = inw(base + 0x4);
+ if (status != 0) {
+ dev_err(&pdev->dev, "Card%d got out of sync.Card "
+ "Status:0x%x\n", index + 1, status);
+ goto errrelfw;
+ }
}
- memset(isi_ports, 0, sizeof(isi_ports));
- for (card = 0; card < BOARD_COUNT; card++) {
- port = &isi_ports[card * 16];
- isi_card[card].ports = port;
- spin_lock_init(&isi_card[card].card_lock);
- base = isi_card[card].base;
- for (channel = 0; channel < 16; channel++, port++) {
- port->magic = ISICOM_MAGIC;
- port->card = &isi_card[card];
- port->channel = channel;
- port->close_delay = 50 * HZ/100;
- port->closing_wait = 3000 * HZ/100;
- INIT_WORK(&port->hangup_tq, do_isicom_hangup, port);
- INIT_WORK(&port->bh_tqueue, isicom_bottomhalf, port);
- port->status = 0;
- init_waitqueue_head(&port->open_wait);
- init_waitqueue_head(&port->close_wait);
- /* . . . */
+/* XXX: should we test it by reading it back and comparing with original like
+ * in load firmware package? */
+ for (frame = (struct stframe *)fw->data;
+ frame < (struct stframe *)(fw->data + fw->size);
+ frame = (struct stframe *)((u8 *)(frame + 1) +
+ frame->count)) {
+ if (WaitTillCardIsFree(base))
+ goto errrelfw;
+
+ outw(0xf1, base); /* start download sequence */
+ outw(0x00, base);
+ outw(frame->addr, base); /* lsb of address */
+
+ word_count = (frame->count >> 1) + frame->count % 2;
+ outw(word_count + 1, base);
+ InterruptTheCard(base);
+
+ udelay(50); /* 0xf */
+
+ if (WaitTillCardIsFree(base))
+ goto errrelfw;
+
+ status = inw(base + 0x4);
+ if (status != 0) {
+ dev_warn(&pdev->dev, "Card%d rejected verify header:\n"
+ KERN_WARNING "Address:0x%x\n"
+ KERN_WARNING "Count:0x%x\n"
+ KERN_WARNING "Status: 0x%x\n",
+ index + 1, frame->addr, frame->count, status);
+ goto errrelfw;
+ }
+
+ data = kmalloc(word_count * 2, GFP_KERNEL);
+ if (data == NULL) {
+ dev_err(&pdev->dev, "Card%d, firmware upload "
+ "failed, not enough memory\n", index + 1);
+ goto errrelfw;
+ }
+ inw(base);
+ insw(base, data, word_count);
+ InterruptTheCard(base);
+
+ for (a = 0; a < frame->count; a++)
+ if (data[a] != frame->data[a]) {
+ kfree(data);
+ dev_err(&pdev->dev, "Card%d, firmware upload "
+ "failed\n", index + 1);
+ goto errrelfw;
+ }
+ kfree(data);
+
+ udelay(50); /* 0xf */
+
+ if (WaitTillCardIsFree(base))
+ goto errrelfw;
+
+ status = inw(base + 0x4);
+ if (status != 0) {
+ dev_err(&pdev->dev, "Card%d verify got out of sync. "
+ "Card Status:0x%x\n", index + 1, status);
+ goto errrelfw;
}
}
- return 1;
+ /* xfer ctrl */
+ if (WaitTillCardIsFree(base))
+ goto errrelfw;
+
+ outw(0xf2, base);
+ outw(0x800, base);
+ outw(0x0, base);
+ outw(0x0, base);
+ InterruptTheCard(base);
+ outw(0x0, base + 0x4); /* for ISI4608 cards */
+
+ board->status |= FIRMWARE_LOADED;
+ retval = 0;
+
+errrelfw:
+ release_firmware(fw);
+end:
+ return retval;
}
/*
* Insmod can set static symbols so keep these static
*/
+static unsigned int card_count;
-static int io[4];
-static int irq[4];
+static int __devinit isicom_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ unsigned int signature, index;
+ int retval = -EPERM;
+ struct isi_board *board = NULL;
-MODULE_AUTHOR("MultiTech");
-MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech");
-MODULE_LICENSE("GPL");
-module_param_array(io, int, NULL, 0);
-MODULE_PARM_DESC(io, "I/O ports for the cards");
-module_param_array(irq, int, NULL, 0);
-MODULE_PARM_DESC(irq, "Interrupts for the cards");
+ if (card_count >= BOARD_COUNT)
+ goto err;
-static int __devinit isicom_setup(void)
-{
- struct pci_dev *dev = NULL;
- int retval, card, idx, count;
- unsigned char pciirq;
- unsigned int ioaddr;
-
- card = 0;
- for (idx=0; idx < BOARD_COUNT; idx++) {
- if (io[idx]) {
- isi_card[idx].base=io[idx];
- isi_card[idx].irq=irq[idx];
- isi_card[idx].isa=YES;
- card++;
- }
- else {
- isi_card[idx].base = 0;
- isi_card[idx].irq = 0;
- }
+ retval = pci_enable_device(pdev);
+ if (retval) {
+ dev_err(&pdev->dev, "failed to enable\n");
+ goto err;
}
- for (idx=0 ;idx < card; idx++) {
- if (!((isi_card[idx].irq==2)||(isi_card[idx].irq==3)||
- (isi_card[idx].irq==4)||(isi_card[idx].irq==5)||
- (isi_card[idx].irq==7)||(isi_card[idx].irq==10)||
- (isi_card[idx].irq==11)||(isi_card[idx].irq==12)||
- (isi_card[idx].irq==15))) {
-
- if (isi_card[idx].base) {
- printk(KERN_ERR "ISICOM: Irq %d unsupported. Disabling Card%d...\n",
- isi_card[idx].irq, idx+1);
- isi_card[idx].base=0;
- card--;
- }
+ dev_info(&pdev->dev, "ISI PCI Card(Device ID 0x%x)\n", ent->device);
+
+ /* allot the first empty slot in the array */
+ for (index = 0; index < BOARD_COUNT; index++)
+ if (isi_card[index].base == 0) {
+ board = &isi_card[index];
+ break;
}
+
+ board->index = index;
+ board->base = pci_resource_start(pdev, 3);
+ board->irq = pdev->irq;
+ card_count++;
+
+ pci_set_drvdata(pdev, board);
+
+ retval = pci_request_region(pdev, 3, ISICOM_NAME);
+ if (retval) {
+ dev_err(&pdev->dev, "I/O Region 0x%lx-0x%lx is busy. Card%d "
+ "will be disabled.\n", board->base, board->base + 15,
+ index + 1);
+ retval = -EBUSY;
+ goto errdec;
}
- if (card < BOARD_COUNT) {
- for (idx=0; idx < DEVID_COUNT; idx++) {
- dev = NULL;
- for (;;){
- if (!(dev = pci_find_device(VENDOR_ID, isicom_pci_tbl[idx].device, dev)))
- break;
- if (card >= BOARD_COUNT)
- break;
+ retval = request_irq(board->irq, isicom_interrupt,
+ IRQF_SHARED | IRQF_DISABLED, ISICOM_NAME, board);
+ if (retval < 0) {
+ dev_err(&pdev->dev, "Could not install handler at Irq %d. "
+ "Card%d will be disabled.\n", board->irq, index + 1);
+ goto errunrr;
+ }
- if (pci_enable_device(dev))
- break;
+ retval = reset_card(pdev, index, &signature);
+ if (retval < 0)
+ goto errunri;
- /* found a PCI ISI card! */
- ioaddr = pci_resource_start (dev, 3);
- /* i.e at offset 0x1c in the
- * PCI configuration register
- * space.
- */
- pciirq = dev->irq;
- printk(KERN_INFO "ISI PCI Card(Device ID 0x%x)\n", isicom_pci_tbl[idx].device);
- /*
- * allot the first empty slot in the array
- */
- for (count=0; count < BOARD_COUNT; count++) {
- if (isi_card[count].base == 0) {
- isi_card[count].base = ioaddr;
- isi_card[count].irq = pciirq;
- isi_card[count].isa = NO;
- card++;
- break;
- }
- }
- }
- if (card >= BOARD_COUNT) break;
+ retval = load_firmware(pdev, index, signature);
+ if (retval < 0)
+ goto errunri;
+
+ for (index = 0; index < board->port_count; index++)
+ tty_register_device(isicom_normal, board->index * 16 + index,
+ &pdev->dev);
+
+ return 0;
+
+errunri:
+ free_irq(board->irq, board);
+errunrr:
+ pci_release_region(pdev, 3);
+errdec:
+ board->base = 0;
+ card_count--;
+ pci_disable_device(pdev);
+err:
+ return retval;
+}
+
+static void __devexit isicom_remove(struct pci_dev *pdev)
+{
+ struct isi_board *board = pci_get_drvdata(pdev);
+ unsigned int i;
+
+ for (i = 0; i < board->port_count; i++)
+ tty_unregister_device(isicom_normal, board->index * 16 + i);
+
+ free_irq(board->irq, board);
+ pci_release_region(pdev, 3);
+ board->base = 0;
+ card_count--;
+ pci_disable_device(pdev);
+}
+
+static int __init isicom_init(void)
+{
+ int retval, idx, channel;
+ struct isi_port *port;
+
+ for (idx = 0; idx < BOARD_COUNT; idx++) {
+ port = &isi_ports[idx * 16];
+ isi_card[idx].ports = port;
+ spin_lock_init(&isi_card[idx].card_lock);
+ for (channel = 0; channel < 16; channel++, port++) {
+ tty_port_init(&port->port);
+ port->magic = ISICOM_MAGIC;
+ port->card = &isi_card[idx];
+ port->channel = channel;
+ port->port.close_delay = 50 * HZ/100;
+ port->port.closing_wait = 3000 * HZ/100;
+ port->status = 0;
+ /* . . . */
}
+ isi_card[idx].base = 0;
+ isi_card[idx].irq = 0;
}
- if (!(isi_card[0].base || isi_card[1].base || isi_card[2].base || isi_card[3].base)) {
- printk(KERN_ERR "ISICOM: No valid card configuration. Driver cannot be initialized...\n");
- return -EIO;
+ /* tty driver structure initialization */
+ isicom_normal = alloc_tty_driver(PORT_COUNT);
+ if (!isicom_normal) {
+ retval = -ENOMEM;
+ goto error;
}
- retval = misc_register(&isiloader_device);
- if (retval < 0) {
- printk(KERN_ERR "ISICOM: Unable to register firmware loader driver.\n");
- return retval;
+ isicom_normal->owner = THIS_MODULE;
+ isicom_normal->name = "ttyM";
+ isicom_normal->major = ISICOM_NMAJOR;
+ isicom_normal->minor_start = 0;
+ isicom_normal->type = TTY_DRIVER_TYPE_SERIAL;
+ isicom_normal->subtype = SERIAL_TYPE_NORMAL;
+ isicom_normal->init_termios = tty_std_termios;
+ isicom_normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
+ CLOCAL;
+ isicom_normal->flags = TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_HARDWARE_BREAK;
+ tty_set_operations(isicom_normal, &isicom_ops);
+
+ retval = tty_register_driver(isicom_normal);
+ if (retval) {
+ pr_dbg("Couldn't register the dialin driver\n");
+ goto err_puttty;
}
- if (!isicom_init()) {
- if (misc_deregister(&isiloader_device))
- printk(KERN_ERR "ISICOM: Unable to unregister Firmware Loader driver\n");
- return -EIO;
+ retval = pci_register_driver(&isicom_driver);
+ if (retval < 0) {
+ printk(KERN_ERR "ISICOM: Unable to register pci driver.\n");
+ goto err_unrtty;
}
- init_timer(&tx);
- tx.expires = jiffies + 1;
- tx.data = 0;
- tx.function = isicom_tx;
- re_schedule = 1;
- add_timer(&tx);
+ mod_timer(&tx, jiffies + 1);
return 0;
+err_unrtty:
+ tty_unregister_driver(isicom_normal);
+err_puttty:
+ put_tty_driver(isicom_normal);
+error:
+ return retval;
}
static void __exit isicom_exit(void)
{
- re_schedule = 0;
- /* FIXME */
- msleep(1000);
- unregister_isr();
- unregister_drivers();
- unregister_ioregion();
- if (tmp_buf)
- free_page((unsigned long)tmp_buf);
- if (misc_deregister(&isiloader_device))
- printk(KERN_ERR "ISICOM: Unable to unregister Firmware Loader driver\n");
+ del_timer_sync(&tx);
+
+ pci_unregister_driver(&isicom_driver);
+ tty_unregister_driver(isicom_normal);
+ put_tty_driver(isicom_normal);
}
-module_init(isicom_setup);
+module_init(isicom_init);
module_exit(isicom_exit);
+
+MODULE_AUTHOR("MultiTech");
+MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech");
+MODULE_LICENSE("GPL");