* source@mvista.com
*
* Copyright 2002 MontaVista Software Inc.
+ * Copyright 2006 IBM Corp., Christian Krafft <krafft@de.ibm.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* and drives the real SMI state machine.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <asm/system.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/notifier.h>
+#include <linux/mutex.h>
#include <linux/kthread.h>
#include <asm/irq.h>
-#ifdef CONFIG_HIGH_RES_TIMERS
-#include <linux/hrtime.h>
-# if defined(schedule_next_int)
-/* Old high-res timer code, do translations. */
-# define get_arch_cycles(a) quick_update_jiffies_sub(a)
-# define arch_cycles_per_jiffy cycles_per_jiffies
-# endif
-static inline void add_usec_to_timer(struct timer_list *t, long v)
-{
- t->arch_cycle_expires += nsec_to_arch_cycle(v * 1000);
- while (t->arch_cycle_expires >= arch_cycles_per_jiffy)
- {
- t->expires++;
- t->arch_cycle_expires -= arch_cycles_per_jiffy;
- }
-}
-#endif
#include <linux/interrupt.h>
#include <linux/rcupdate.h>
#include <linux/ipmi_smi.h>
#include "ipmi_si_sm.h"
#include <linux/init.h>
#include <linux/dmi.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/pnp.h>
+
+#ifdef CONFIG_PPC_OF
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#endif
+
+#define PFX "ipmi_si: "
/* Measure times between events in the driver. */
#undef DEBUG_TIMING
#define SI_USEC_PER_JIFFY (1000000/HZ)
#define SI_TIMEOUT_JIFFIES (SI_TIMEOUT_TIME_USEC/SI_USEC_PER_JIFFY)
#define SI_SHORT_TIMEOUT_USEC 250 /* .25ms when the SM request a
- short timeout */
+ short timeout */
enum si_intf_state {
SI_NORMAL,
SI_CLEARING_FLAGS_THEN_SET_IRQ,
SI_GETTING_MESSAGES,
SI_ENABLE_INTERRUPTS1,
- SI_ENABLE_INTERRUPTS2
+ SI_ENABLE_INTERRUPTS2,
+ SI_DISABLE_INTERRUPTS1,
+ SI_DISABLE_INTERRUPTS2
/* FIXME - add watchdog stuff. */
};
enum si_type {
SI_KCS, SI_SMIC, SI_BT
};
+static char *si_to_str[] = { "kcs", "smic", "bt" };
+
+#define DEVICE_NAME "ipmi_si"
-struct ipmi_device_id {
- unsigned char device_id;
- unsigned char device_revision;
- unsigned char firmware_revision_1;
- unsigned char firmware_revision_2;
- unsigned char ipmi_version;
- unsigned char additional_device_support;
- unsigned char manufacturer_id[3];
- unsigned char product_id[2];
- unsigned char aux_firmware_revision[4];
-} __attribute__((packed));
+static struct platform_driver ipmi_driver = {
+ .driver = {
+ .name = DEVICE_NAME,
+ .bus = &platform_bus_type
+ }
+};
-#define ipmi_version_major(v) ((v)->ipmi_version & 0xf)
-#define ipmi_version_minor(v) ((v)->ipmi_version >> 4)
-struct smi_info
-{
+/*
+ * Indexes into stats[] in smi_info below.
+ */
+enum si_stat_indexes {
+ /*
+ * Number of times the driver requested a timer while an operation
+ * was in progress.
+ */
+ SI_STAT_short_timeouts = 0,
+
+ /*
+ * Number of times the driver requested a timer while nothing was in
+ * progress.
+ */
+ SI_STAT_long_timeouts,
+
+ /* Number of times the interface was idle while being polled. */
+ SI_STAT_idles,
+
+ /* Number of interrupts the driver handled. */
+ SI_STAT_interrupts,
+
+ /* Number of time the driver got an ATTN from the hardware. */
+ SI_STAT_attentions,
+
+ /* Number of times the driver requested flags from the hardware. */
+ SI_STAT_flag_fetches,
+
+ /* Number of times the hardware didn't follow the state machine. */
+ SI_STAT_hosed_count,
+
+ /* Number of completed messages. */
+ SI_STAT_complete_transactions,
+
+ /* Number of IPMI events received from the hardware. */
+ SI_STAT_events,
+
+ /* Number of watchdog pretimeouts. */
+ SI_STAT_watchdog_pretimeouts,
+
+ /* Number of asyncronous messages received. */
+ SI_STAT_incoming_messages,
+
+
+ /* This *must* remain last, add new values above this. */
+ SI_NUM_STATS
+};
+
+struct smi_info {
int intf_num;
ipmi_smi_t intf;
struct si_sm_data *si_sm;
struct ipmi_smi_msg *curr_msg;
enum si_intf_state si_state;
- /* Used to handle the various types of I/O that can occur with
- IPMI */
+ /*
+ * Used to handle the various types of I/O that can occur with
+ * IPMI
+ */
struct si_sm_io io;
int (*io_setup)(struct smi_info *info);
void (*io_cleanup)(struct smi_info *info);
int (*irq_setup)(struct smi_info *info);
void (*irq_cleanup)(struct smi_info *info);
unsigned int io_size;
+ char *addr_source; /* ACPI, PCI, SMBIOS, hardcode, default. */
+ void (*addr_source_cleanup)(struct smi_info *info);
+ void *addr_source_data;
- /* Per-OEM handler, called from handle_flags().
- Returns 1 when handle_flags() needs to be re-run
- or 0 indicating it set si_state itself.
- */
+ /*
+ * Per-OEM handler, called from handle_flags(). Returns 1
+ * when handle_flags() needs to be re-run or 0 indicating it
+ * set si_state itself.
+ */
int (*oem_data_avail_handler)(struct smi_info *smi_info);
- /* Flags from the last GET_MSG_FLAGS command, used when an ATTN
- is set to hold the flags until we are done handling everything
- from the flags. */
+ /*
+ * Flags from the last GET_MSG_FLAGS command, used when an ATTN
+ * is set to hold the flags until we are done handling everything
+ * from the flags.
+ */
#define RECEIVE_MSG_AVAIL 0x01
#define EVENT_MSG_BUFFER_FULL 0x02
#define WDT_PRE_TIMEOUT_INT 0x08
#define OEM1_DATA_AVAIL 0x40
#define OEM2_DATA_AVAIL 0x80
#define OEM_DATA_AVAIL (OEM0_DATA_AVAIL | \
- OEM1_DATA_AVAIL | \
- OEM2_DATA_AVAIL)
+ OEM1_DATA_AVAIL | \
+ OEM2_DATA_AVAIL)
unsigned char msg_flags;
- /* If set to true, this will request events the next time the
- state machine is idle. */
+ /* Does the BMC have an event buffer? */
+ char has_event_buffer;
+
+ /*
+ * If set to true, this will request events the next time the
+ * state machine is idle.
+ */
atomic_t req_events;
- /* If true, run the state machine to completion on every send
- call. Generally used after a panic to make sure stuff goes
- out. */
+ /*
+ * If true, run the state machine to completion on every send
+ * call. Generally used after a panic to make sure stuff goes
+ * out.
+ */
int run_to_completion;
/* The I/O port of an SI interface. */
int port;
- /* The space between start addresses of the two ports. For
- instance, if the first port is 0xca2 and the spacing is 4, then
- the second port is 0xca6. */
+ /*
+ * The space between start addresses of the two ports. For
+ * instance, if the first port is 0xca2 and the spacing is 4, then
+ * the second port is 0xca6.
+ */
unsigned int spacing;
/* zero if no irq; */
/* Used to gracefully stop the timer without race conditions. */
atomic_t stop_operation;
- /* The driver will disable interrupts when it gets into a
- situation where it cannot handle messages due to lack of
- memory. Once that situation clears up, it will re-enable
- interrupts. */
+ /*
+ * The driver will disable interrupts when it gets into a
+ * situation where it cannot handle messages due to lack of
+ * memory. Once that situation clears up, it will re-enable
+ * interrupts.
+ */
int interrupt_disabled;
+ /* From the get device id response... */
struct ipmi_device_id device_id;
+ /* Driver model stuff. */
+ struct device *dev;
+ struct platform_device *pdev;
+
+ /*
+ * True if we allocated the device, false if it came from
+ * someplace else (like PCI).
+ */
+ int dev_registered;
+
/* Slave address, could be reported from DMI. */
unsigned char slave_addr;
/* Counters and things for the proc filesystem. */
- spinlock_t count_lock;
- unsigned long short_timeouts;
- unsigned long long_timeouts;
- unsigned long timeout_restarts;
- unsigned long idles;
- unsigned long interrupts;
- unsigned long attentions;
- unsigned long flag_fetches;
- unsigned long hosed_count;
- unsigned long complete_transactions;
- unsigned long events;
- unsigned long watchdog_pretimeouts;
- unsigned long incoming_messages;
-
- struct task_struct *thread;
+ atomic_t stats[SI_NUM_STATS];
+
+ struct task_struct *thread;
+
+ struct list_head link;
};
-static struct notifier_block *xaction_notifier_list;
-static int register_xaction_notifier(struct notifier_block * nb)
+#define smi_inc_stat(smi, stat) \
+ atomic_inc(&(smi)->stats[SI_STAT_ ## stat])
+#define smi_get_stat(smi, stat) \
+ ((unsigned int) atomic_read(&(smi)->stats[SI_STAT_ ## stat]))
+
+#define SI_MAX_PARMS 4
+
+static int force_kipmid[SI_MAX_PARMS];
+static int num_force_kipmid;
+
+static int unload_when_empty = 1;
+
+static int try_smi_init(struct smi_info *smi);
+static void cleanup_one_si(struct smi_info *to_clean);
+
+static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list);
+static int register_xaction_notifier(struct notifier_block *nb)
{
- return notifier_chain_register(&xaction_notifier_list, nb);
+ return atomic_notifier_chain_register(&xaction_notifier_list, nb);
}
-static void si_restart_short_timer(struct smi_info *smi_info);
-
static void deliver_recv_msg(struct smi_info *smi_info,
struct ipmi_smi_msg *msg)
{
/* Deliver the message to the upper layer with the lock
- released. */
+ released. */
spin_unlock(&(smi_info->si_lock));
ipmi_smi_msg_received(smi_info->intf, msg);
spin_lock(&(smi_info->si_lock));
}
-static void return_hosed_msg(struct smi_info *smi_info)
+static void return_hosed_msg(struct smi_info *smi_info, int cCode)
{
struct ipmi_smi_msg *msg = smi_info->curr_msg;
+ if (cCode < 0 || cCode > IPMI_ERR_UNSPECIFIED)
+ cCode = IPMI_ERR_UNSPECIFIED;
+ /* else use it as is */
+
/* Make it a reponse */
msg->rsp[0] = msg->data[0] | 4;
msg->rsp[1] = msg->data[1];
- msg->rsp[2] = 0xFF; /* Unknown error. */
+ msg->rsp[2] = cCode;
msg->rsp_size = 3;
smi_info->curr_msg = NULL;
struct timeval t;
#endif
- /* No need to save flags, we aleady have interrupts off and we
- already hold the SMI lock. */
- spin_lock(&(smi_info->msg_lock));
+ /*
+ * No need to save flags, we aleady have interrupts off and we
+ * already hold the SMI lock.
+ */
+ if (!smi_info->run_to_completion)
+ spin_lock(&(smi_info->msg_lock));
/* Pick the high priority queue first. */
- if (! list_empty(&(smi_info->hp_xmit_msgs))) {
+ if (!list_empty(&(smi_info->hp_xmit_msgs))) {
entry = smi_info->hp_xmit_msgs.next;
- } else if (! list_empty(&(smi_info->xmit_msgs))) {
+ } else if (!list_empty(&(smi_info->xmit_msgs))) {
entry = smi_info->xmit_msgs.next;
}
- if (! entry) {
+ if (!entry) {
smi_info->curr_msg = NULL;
rv = SI_SM_IDLE;
} else {
link);
#ifdef DEBUG_TIMING
do_gettimeofday(&t);
- printk("**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec);
+ printk(KERN_DEBUG "**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
- err = notifier_call_chain(&xaction_notifier_list, 0, smi_info);
+ err = atomic_notifier_call_chain(&xaction_notifier_list,
+ 0, smi_info);
if (err & NOTIFY_STOP_MASK) {
rv = SI_SM_CALL_WITHOUT_DELAY;
goto out;
smi_info->si_sm,
smi_info->curr_msg->data,
smi_info->curr_msg->data_size);
- if (err) {
- return_hosed_msg(smi_info);
- }
+ if (err)
+ return_hosed_msg(smi_info, err);
rv = SI_SM_CALL_WITHOUT_DELAY;
}
- out:
- spin_unlock(&(smi_info->msg_lock));
+ out:
+ if (!smi_info->run_to_completion)
+ spin_unlock(&(smi_info->msg_lock));
return rv;
}
{
unsigned char msg[2];
- /* If we are enabling interrupts, we have to tell the
- BMC to use them. */
+ /*
+ * If we are enabling interrupts, we have to tell the
+ * BMC to use them.
+ */
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
smi_info->si_state = SI_ENABLE_INTERRUPTS1;
}
+static void start_disable_irq(struct smi_info *smi_info)
+{
+ unsigned char msg[2];
+
+ msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
+ msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
+
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+ smi_info->si_state = SI_DISABLE_INTERRUPTS1;
+}
+
static void start_clear_flags(struct smi_info *smi_info)
{
unsigned char msg[3];
smi_info->si_state = SI_CLEARING_FLAGS;
}
-/* When we have a situtaion where we run out of memory and cannot
- allocate messages, we just leave them in the BMC and run the system
- polled until we can allocate some memory. Once we have some
- memory, we will re-enable the interrupt. */
+/*
+ * When we have a situtaion where we run out of memory and cannot
+ * allocate messages, we just leave them in the BMC and run the system
+ * polled until we can allocate some memory. Once we have some
+ * memory, we will re-enable the interrupt.
+ */
static inline void disable_si_irq(struct smi_info *smi_info)
{
- if ((smi_info->irq) && (! smi_info->interrupt_disabled)) {
- disable_irq_nosync(smi_info->irq);
+ if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
+ start_disable_irq(smi_info);
smi_info->interrupt_disabled = 1;
}
}
static inline void enable_si_irq(struct smi_info *smi_info)
{
if ((smi_info->irq) && (smi_info->interrupt_disabled)) {
- enable_irq(smi_info->irq);
+ start_enable_irq(smi_info);
smi_info->interrupt_disabled = 0;
}
}
retry:
if (smi_info->msg_flags & WDT_PRE_TIMEOUT_INT) {
/* Watchdog pre-timeout */
- spin_lock(&smi_info->count_lock);
- smi_info->watchdog_pretimeouts++;
- spin_unlock(&smi_info->count_lock);
+ smi_inc_stat(smi_info, watchdog_pretimeouts);
start_clear_flags(smi_info);
smi_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT;
} else if (smi_info->msg_flags & RECEIVE_MSG_AVAIL) {
/* Messages available. */
smi_info->curr_msg = ipmi_alloc_smi_msg();
- if (! smi_info->curr_msg) {
+ if (!smi_info->curr_msg) {
disable_si_irq(smi_info);
smi_info->si_state = SI_NORMAL;
return;
} else if (smi_info->msg_flags & EVENT_MSG_BUFFER_FULL) {
/* Events available. */
smi_info->curr_msg = ipmi_alloc_smi_msg();
- if (! smi_info->curr_msg) {
+ if (!smi_info->curr_msg) {
disable_si_irq(smi_info);
smi_info->si_state = SI_NORMAL;
return;
smi_info->curr_msg->data,
smi_info->curr_msg->data_size);
smi_info->si_state = SI_GETTING_EVENTS;
- } else if (smi_info->msg_flags & OEM_DATA_AVAIL) {
- if (smi_info->oem_data_avail_handler)
- if (smi_info->oem_data_avail_handler(smi_info))
- goto retry;
- } else {
+ } else if (smi_info->msg_flags & OEM_DATA_AVAIL &&
+ smi_info->oem_data_avail_handler) {
+ if (smi_info->oem_data_avail_handler(smi_info))
+ goto retry;
+ } else
smi_info->si_state = SI_NORMAL;
- }
}
static void handle_transaction_done(struct smi_info *smi_info)
struct timeval t;
do_gettimeofday(&t);
- printk("**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec);
+ printk(KERN_DEBUG "**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
switch (smi_info->si_state) {
case SI_NORMAL:
- if (! smi_info->curr_msg)
+ if (!smi_info->curr_msg)
break;
smi_info->curr_msg->rsp_size
smi_info->curr_msg->rsp,
IPMI_MAX_MSG_LENGTH);
- /* Do this here becase deliver_recv_msg() releases the
- lock, and a new message can be put in during the
- time the lock is released. */
+ /*
+ * Do this here becase deliver_recv_msg() releases the
+ * lock, and a new message can be put in during the
+ * time the lock is released.
+ */
msg = smi_info->curr_msg;
smi_info->curr_msg = NULL;
deliver_recv_msg(smi_info, msg);
/* We got the flags from the SMI, now handle them. */
len = smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
if (msg[2] != 0) {
- /* Error fetching flags, just give up for
- now. */
+ /* Error fetching flags, just give up for now. */
smi_info->si_state = SI_NORMAL;
} else if (len < 4) {
- /* Hmm, no flags. That's technically illegal, but
- don't use uninitialized data. */
+ /*
+ * Hmm, no flags. That's technically illegal, but
+ * don't use uninitialized data.
+ */
smi_info->si_state = SI_NORMAL;
} else {
smi_info->msg_flags = msg[3];
smi_info->curr_msg->rsp,
IPMI_MAX_MSG_LENGTH);
- /* Do this here becase deliver_recv_msg() releases the
- lock, and a new message can be put in during the
- time the lock is released. */
+ /*
+ * Do this here becase deliver_recv_msg() releases the
+ * lock, and a new message can be put in during the
+ * time the lock is released.
+ */
msg = smi_info->curr_msg;
smi_info->curr_msg = NULL;
if (msg->rsp[2] != 0) {
smi_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL;
handle_flags(smi_info);
} else {
- spin_lock(&smi_info->count_lock);
- smi_info->events++;
- spin_unlock(&smi_info->count_lock);
-
- /* Do this before we deliver the message
- because delivering the message releases the
- lock and something else can mess with the
- state. */
+ smi_inc_stat(smi_info, events);
+
+ /*
+ * Do this before we deliver the message
+ * because delivering the message releases the
+ * lock and something else can mess with the
+ * state.
+ */
handle_flags(smi_info);
deliver_recv_msg(smi_info, msg);
smi_info->curr_msg->rsp,
IPMI_MAX_MSG_LENGTH);
- /* Do this here becase deliver_recv_msg() releases the
- lock, and a new message can be put in during the
- time the lock is released. */
+ /*
+ * Do this here becase deliver_recv_msg() releases the
+ * lock, and a new message can be put in during the
+ * time the lock is released.
+ */
msg = smi_info->curr_msg;
smi_info->curr_msg = NULL;
if (msg->rsp[2] != 0) {
smi_info->msg_flags &= ~RECEIVE_MSG_AVAIL;
handle_flags(smi_info);
} else {
- spin_lock(&smi_info->count_lock);
- smi_info->incoming_messages++;
- spin_unlock(&smi_info->count_lock);
-
- /* Do this before we deliver the message
- because delivering the message releases the
- lock and something else can mess with the
- state. */
+ smi_inc_stat(smi_info, incoming_messages);
+
+ /*
+ * Do this before we deliver the message
+ * because delivering the message releases the
+ * lock and something else can mess with the
+ * state.
+ */
handle_flags(smi_info);
deliver_recv_msg(smi_info, msg);
} else {
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
- msg[2] = msg[3] | 1; /* enable msg queue int */
+ msg[2] = (msg[3] |
+ IPMI_BMC_RCV_MSG_INTR |
+ IPMI_BMC_EVT_MSG_INTR);
smi_info->handlers->start_transaction(
smi_info->si_sm, msg, 3);
smi_info->si_state = SI_ENABLE_INTERRUPTS2;
smi_info->si_state = SI_NORMAL;
break;
}
+
+ case SI_DISABLE_INTERRUPTS1:
+ {
+ unsigned char msg[4];
+
+ /* We got the flags from the SMI, now handle them. */
+ smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
+ if (msg[2] != 0) {
+ printk(KERN_WARNING
+ "ipmi_si: Could not disable interrupts"
+ ", failed get.\n");
+ smi_info->si_state = SI_NORMAL;
+ } else {
+ msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
+ msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
+ msg[2] = (msg[3] &
+ ~(IPMI_BMC_RCV_MSG_INTR |
+ IPMI_BMC_EVT_MSG_INTR));
+ smi_info->handlers->start_transaction(
+ smi_info->si_sm, msg, 3);
+ smi_info->si_state = SI_DISABLE_INTERRUPTS2;
+ }
+ break;
+ }
+
+ case SI_DISABLE_INTERRUPTS2:
+ {
+ unsigned char msg[4];
+
+ /* We got the flags from the SMI, now handle them. */
+ smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
+ if (msg[2] != 0) {
+ printk(KERN_WARNING
+ "ipmi_si: Could not disable interrupts"
+ ", failed set.\n");
+ }
+ smi_info->si_state = SI_NORMAL;
+ break;
+ }
}
}
-/* Called on timeouts and events. Timeouts should pass the elapsed
- time, interrupts should pass in zero. */
+/*
+ * Called on timeouts and events. Timeouts should pass the elapsed
+ * time, interrupts should pass in zero. Must be called with
+ * si_lock held and interrupts disabled.
+ */
static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
int time)
{
enum si_sm_result si_sm_result;
restart:
- /* There used to be a loop here that waited a little while
- (around 25us) before giving up. That turned out to be
- pointless, the minimum delays I was seeing were in the 300us
- range, which is far too long to wait in an interrupt. So
- we just run until the state machine tells us something
- happened or it needs a delay. */
+ /*
+ * There used to be a loop here that waited a little while
+ * (around 25us) before giving up. That turned out to be
+ * pointless, the minimum delays I was seeing were in the 300us
+ * range, which is far too long to wait in an interrupt. So
+ * we just run until the state machine tells us something
+ * happened or it needs a delay.
+ */
si_sm_result = smi_info->handlers->event(smi_info->si_sm, time);
time = 0;
while (si_sm_result == SI_SM_CALL_WITHOUT_DELAY)
- {
si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
- }
- if (si_sm_result == SI_SM_TRANSACTION_COMPLETE)
- {
- spin_lock(&smi_info->count_lock);
- smi_info->complete_transactions++;
- spin_unlock(&smi_info->count_lock);
+ if (si_sm_result == SI_SM_TRANSACTION_COMPLETE) {
+ smi_inc_stat(smi_info, complete_transactions);
handle_transaction_done(smi_info);
si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
- }
- else if (si_sm_result == SI_SM_HOSED)
- {
- spin_lock(&smi_info->count_lock);
- smi_info->hosed_count++;
- spin_unlock(&smi_info->count_lock);
+ } else if (si_sm_result == SI_SM_HOSED) {
+ smi_inc_stat(smi_info, hosed_count);
- /* Do the before return_hosed_msg, because that
- releases the lock. */
+ /*
+ * Do the before return_hosed_msg, because that
+ * releases the lock.
+ */
smi_info->si_state = SI_NORMAL;
if (smi_info->curr_msg != NULL) {
- /* If we were handling a user message, format
- a response to send to the upper layer to
- tell it about the error. */
- return_hosed_msg(smi_info);
+ /*
+ * If we were handling a user message, format
+ * a response to send to the upper layer to
+ * tell it about the error.
+ */
+ return_hosed_msg(smi_info, IPMI_ERR_UNSPECIFIED);
}
si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
}
- /* We prefer handling attn over new messages. */
- if (si_sm_result == SI_SM_ATTN)
- {
+ /*
+ * We prefer handling attn over new messages. But don't do
+ * this if there is not yet an upper layer to handle anything.
+ */
+ if (likely(smi_info->intf) && si_sm_result == SI_SM_ATTN) {
unsigned char msg[2];
- spin_lock(&smi_info->count_lock);
- smi_info->attentions++;
- spin_unlock(&smi_info->count_lock);
+ smi_inc_stat(smi_info, attentions);
- /* Got a attn, send down a get message flags to see
- what's causing it. It would be better to handle
- this in the upper layer, but due to the way
- interrupts work with the SMI, that's not really
- possible. */
+ /*
+ * Got a attn, send down a get message flags to see
+ * what's causing it. It would be better to handle
+ * this in the upper layer, but due to the way
+ * interrupts work with the SMI, that's not really
+ * possible.
+ */
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
msg[1] = IPMI_GET_MSG_FLAGS_CMD;
/* If we are currently idle, try to start the next message. */
if (si_sm_result == SI_SM_IDLE) {
- spin_lock(&smi_info->count_lock);
- smi_info->idles++;
- spin_unlock(&smi_info->count_lock);
+ smi_inc_stat(smi_info, idles);
si_sm_result = start_next_msg(smi_info);
if (si_sm_result != SI_SM_IDLE)
goto restart;
- }
+ }
if ((si_sm_result == SI_SM_IDLE)
- && (atomic_read(&smi_info->req_events)))
- {
- /* We are idle and the upper layer requested that I fetch
- events, so do so. */
- unsigned char msg[2];
+ && (atomic_read(&smi_info->req_events))) {
+ /*
+ * We are idle and the upper layer requested that I fetch
+ * events, so do so.
+ */
+ atomic_set(&smi_info->req_events, 0);
- spin_lock(&smi_info->count_lock);
- smi_info->flag_fetches++;
- spin_unlock(&smi_info->count_lock);
+ smi_info->curr_msg = ipmi_alloc_smi_msg();
+ if (!smi_info->curr_msg)
+ goto out;
- atomic_set(&smi_info->req_events, 0);
- msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
- msg[1] = IPMI_GET_MSG_FLAGS_CMD;
+ smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
+ smi_info->curr_msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD;
+ smi_info->curr_msg->data_size = 2;
smi_info->handlers->start_transaction(
- smi_info->si_sm, msg, 2);
- smi_info->si_state = SI_GETTING_FLAGS;
+ smi_info->si_sm,
+ smi_info->curr_msg->data,
+ smi_info->curr_msg->data_size);
+ smi_info->si_state = SI_GETTING_EVENTS;
goto restart;
}
-
+ out:
return si_sm_result;
}
struct timeval t;
#endif
- spin_lock_irqsave(&(smi_info->msg_lock), flags);
+ if (atomic_read(&smi_info->stop_operation)) {
+ msg->rsp[0] = msg->data[0] | 4;
+ msg->rsp[1] = msg->data[1];
+ msg->rsp[2] = IPMI_ERR_UNSPECIFIED;
+ msg->rsp_size = 3;
+ deliver_recv_msg(smi_info, msg);
+ return;
+ }
+
#ifdef DEBUG_TIMING
do_gettimeofday(&t);
printk("**Enqueue: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
if (smi_info->run_to_completion) {
- /* If we are running to completion, then throw it in
- the list and run transactions until everything is
- clear. Priority doesn't matter here. */
+ /*
+ * If we are running to completion, then throw it in
+ * the list and run transactions until everything is
+ * clear. Priority doesn't matter here.
+ */
+
+ /*
+ * Run to completion means we are single-threaded, no
+ * need for locks.
+ */
list_add_tail(&(msg->link), &(smi_info->xmit_msgs));
- /* We have to release the msg lock and claim the smi
- lock in this case, because of race conditions. */
- spin_unlock_irqrestore(&(smi_info->msg_lock), flags);
-
- spin_lock_irqsave(&(smi_info->si_lock), flags);
result = smi_event_handler(smi_info, 0);
while (result != SI_SM_IDLE) {
udelay(SI_SHORT_TIMEOUT_USEC);
result = smi_event_handler(smi_info,
SI_SHORT_TIMEOUT_USEC);
}
- spin_unlock_irqrestore(&(smi_info->si_lock), flags);
return;
- } else {
- if (priority > 0) {
- list_add_tail(&(msg->link), &(smi_info->hp_xmit_msgs));
- } else {
- list_add_tail(&(msg->link), &(smi_info->xmit_msgs));
- }
}
- spin_unlock_irqrestore(&(smi_info->msg_lock), flags);
- spin_lock_irqsave(&(smi_info->si_lock), flags);
- if ((smi_info->si_state == SI_NORMAL)
- && (smi_info->curr_msg == NULL))
- {
+ spin_lock_irqsave(&smi_info->msg_lock, flags);
+ if (priority > 0)
+ list_add_tail(&msg->link, &smi_info->hp_xmit_msgs);
+ else
+ list_add_tail(&msg->link, &smi_info->xmit_msgs);
+ spin_unlock_irqrestore(&smi_info->msg_lock, flags);
+
+ spin_lock_irqsave(&smi_info->si_lock, flags);
+ if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL)
start_next_msg(smi_info);
- si_restart_short_timer(smi_info);
- }
- spin_unlock_irqrestore(&(smi_info->si_lock), flags);
+ spin_unlock_irqrestore(&smi_info->si_lock, flags);
}
static void set_run_to_completion(void *send_info, int i_run_to_completion)
{
struct smi_info *smi_info = send_info;
enum si_sm_result result;
- unsigned long flags;
-
- spin_lock_irqsave(&(smi_info->si_lock), flags);
smi_info->run_to_completion = i_run_to_completion;
if (i_run_to_completion) {
SI_SHORT_TIMEOUT_USEC);
}
}
-
- spin_unlock_irqrestore(&(smi_info->si_lock), flags);
}
static int ipmi_thread(void *data)
set_user_nice(current, 19);
while (!kthread_should_stop()) {
spin_lock_irqsave(&(smi_info->si_lock), flags);
- smi_result=smi_event_handler(smi_info, 0);
+ smi_result = smi_event_handler(smi_info, 0);
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
- if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
- /* do nothing */
- }
+ if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
+ ; /* do nothing */
else if (smi_result == SI_SM_CALL_WITH_DELAY)
- udelay(1);
+ schedule();
else
schedule_timeout_interruptible(1);
}
static void poll(void *send_info)
{
struct smi_info *smi_info = send_info;
+ unsigned long flags;
- smi_event_handler(smi_info, 0);
+ /*
+ * Make sure there is some delay in the poll loop so we can
+ * drive time forward and timeout things.
+ */
+ udelay(10);
+ spin_lock_irqsave(&smi_info->si_lock, flags);
+ smi_event_handler(smi_info, 10);
+ spin_unlock_irqrestore(&smi_info->si_lock, flags);
}
static void request_events(void *send_info)
{
struct smi_info *smi_info = send_info;
+ if (atomic_read(&smi_info->stop_operation) ||
+ !smi_info->has_event_buffer)
+ return;
+
atomic_set(&smi_info->req_events, 1);
}
-static int initialized = 0;
-
-/* Must be called with interrupts off and with the si_lock held. */
-static void si_restart_short_timer(struct smi_info *smi_info)
-{
-#if defined(CONFIG_HIGH_RES_TIMERS)
- unsigned long flags;
- unsigned long jiffies_now;
- unsigned long seq;
-
- if (del_timer(&(smi_info->si_timer))) {
- /* If we don't delete the timer, then it will go off
- immediately, anyway. So we only process if we
- actually delete the timer. */
-
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- jiffies_now = jiffies;
- smi_info->si_timer.expires = jiffies_now;
- smi_info->si_timer.arch_cycle_expires
- = get_arch_cycles(jiffies_now);
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
- add_usec_to_timer(&smi_info->si_timer, SI_SHORT_TIMEOUT_USEC);
-
- add_timer(&(smi_info->si_timer));
- spin_lock_irqsave(&smi_info->count_lock, flags);
- smi_info->timeout_restarts++;
- spin_unlock_irqrestore(&smi_info->count_lock, flags);
- }
-#endif
-}
+static int initialized;
static void smi_timeout(unsigned long data)
{
struct timeval t;
#endif
- if (atomic_read(&smi_info->stop_operation))
- return;
-
spin_lock_irqsave(&(smi_info->si_lock), flags);
#ifdef DEBUG_TIMING
do_gettimeofday(&t);
- printk("**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec);
+ printk(KERN_DEBUG "**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
jiffies_now = jiffies;
time_diff = (((long)jiffies_now - (long)smi_info->last_timeout_jiffies)
smi_info->last_timeout_jiffies = jiffies_now;
- if ((smi_info->irq) && (! smi_info->interrupt_disabled)) {
+ if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
/* Running with interrupts, only do long timeouts. */
smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
- spin_lock_irqsave(&smi_info->count_lock, flags);
- smi_info->long_timeouts++;
- spin_unlock_irqrestore(&smi_info->count_lock, flags);
+ smi_inc_stat(smi_info, long_timeouts);
goto do_add_timer;
}
- /* If the state machine asks for a short delay, then shorten
- the timer timeout. */
+ /*
+ * If the state machine asks for a short delay, then shorten
+ * the timer timeout.
+ */
if (smi_result == SI_SM_CALL_WITH_DELAY) {
-#if defined(CONFIG_HIGH_RES_TIMERS)
- unsigned long seq;
-#endif
- spin_lock_irqsave(&smi_info->count_lock, flags);
- smi_info->short_timeouts++;
- spin_unlock_irqrestore(&smi_info->count_lock, flags);
-#if defined(CONFIG_HIGH_RES_TIMERS)
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- smi_info->si_timer.expires = jiffies;
- smi_info->si_timer.arch_cycle_expires
- = get_arch_cycles(smi_info->si_timer.expires);
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
- add_usec_to_timer(&smi_info->si_timer, SI_SHORT_TIMEOUT_USEC);
-#else
+ smi_inc_stat(smi_info, short_timeouts);
smi_info->si_timer.expires = jiffies + 1;
-#endif
} else {
- spin_lock_irqsave(&smi_info->count_lock, flags);
- smi_info->long_timeouts++;
- spin_unlock_irqrestore(&smi_info->count_lock, flags);
+ smi_inc_stat(smi_info, long_timeouts);
smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
-#if defined(CONFIG_HIGH_RES_TIMERS)
- smi_info->si_timer.arch_cycle_expires = 0;
-#endif
}
do_add_timer:
add_timer(&(smi_info->si_timer));
}
-static irqreturn_t si_irq_handler(int irq, void *data, struct pt_regs *regs)
+static irqreturn_t si_irq_handler(int irq, void *data)
{
struct smi_info *smi_info = data;
unsigned long flags;
spin_lock_irqsave(&(smi_info->si_lock), flags);
- spin_lock(&smi_info->count_lock);
- smi_info->interrupts++;
- spin_unlock(&smi_info->count_lock);
-
- if (atomic_read(&smi_info->stop_operation))
- goto out;
+ smi_inc_stat(smi_info, interrupts);
#ifdef DEBUG_TIMING
do_gettimeofday(&t);
- printk("**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec);
+ printk(KERN_DEBUG "**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
smi_event_handler(smi_info, 0);
- out:
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
return IRQ_HANDLED;
}
-static irqreturn_t si_bt_irq_handler(int irq, void *data, struct pt_regs *regs)
+static irqreturn_t si_bt_irq_handler(int irq, void *data)
{
struct smi_info *smi_info = data;
/* We need to clear the IRQ flag for the BT interface. */
smi_info->io.outputb(&smi_info->io, IPMI_BT_INTMASK_REG,
IPMI_BT_INTMASK_CLEAR_IRQ_BIT
| IPMI_BT_INTMASK_ENABLE_IRQ_BIT);
- return si_irq_handler(irq, data, regs);
+ return si_irq_handler(irq, data);
}
+static int smi_start_processing(void *send_info,
+ ipmi_smi_t intf)
+{
+ struct smi_info *new_smi = send_info;
+ int enable = 0;
+
+ new_smi->intf = intf;
-static struct ipmi_smi_handlers handlers =
+ /* Try to claim any interrupts. */
+ if (new_smi->irq_setup)
+ new_smi->irq_setup(new_smi);
+
+ /* Set up the timer that drives the interface. */
+ setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi);
+ new_smi->last_timeout_jiffies = jiffies;
+ mod_timer(&new_smi->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
+
+ /*
+ * Check if the user forcefully enabled the daemon.
+ */
+ if (new_smi->intf_num < num_force_kipmid)
+ enable = force_kipmid[new_smi->intf_num];
+ /*
+ * The BT interface is efficient enough to not need a thread,
+ * and there is no need for a thread if we have interrupts.
+ */
+ else if ((new_smi->si_type != SI_BT) && (!new_smi->irq))
+ enable = 1;
+
+ if (enable) {
+ new_smi->thread = kthread_run(ipmi_thread, new_smi,
+ "kipmi%d", new_smi->intf_num);
+ if (IS_ERR(new_smi->thread)) {
+ printk(KERN_NOTICE "ipmi_si_intf: Could not start"
+ " kernel thread due to error %ld, only using"
+ " timers to drive the interface\n",
+ PTR_ERR(new_smi->thread));
+ new_smi->thread = NULL;
+ }
+ }
+
+ return 0;
+}
+
+static void set_maintenance_mode(void *send_info, int enable)
{
+ struct smi_info *smi_info = send_info;
+
+ if (!enable)
+ atomic_set(&smi_info->req_events, 0);
+}
+
+static struct ipmi_smi_handlers handlers = {
.owner = THIS_MODULE,
+ .start_processing = smi_start_processing,
.sender = sender,
.request_events = request_events,
+ .set_maintenance_mode = set_maintenance_mode,
.set_run_to_completion = set_run_to_completion,
.poll = poll,
};
-/* There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
- a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS */
-
-#define SI_MAX_PARMS 4
-#define SI_MAX_DRIVERS ((SI_MAX_PARMS * 2) + 2)
-static struct smi_info *smi_infos[SI_MAX_DRIVERS] =
-{ NULL, NULL, NULL, NULL };
+/*
+ * There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
+ * a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS.
+ */
-#define DEVICE_NAME "ipmi_si"
+static LIST_HEAD(smi_infos);
+static DEFINE_MUTEX(smi_infos_lock);
+static int smi_num; /* Used to sequence the SMIs */
-#define DEFAULT_KCS_IO_PORT 0xca2
-#define DEFAULT_SMIC_IO_PORT 0xca9
-#define DEFAULT_BT_IO_PORT 0xe4
#define DEFAULT_REGSPACING 1
+#define DEFAULT_REGSIZE 1
static int si_trydefaults = 1;
static char *si_type[SI_MAX_PARMS];
#define MAX_SI_TYPE_STR 30
static char si_type_str[MAX_SI_TYPE_STR];
static unsigned long addrs[SI_MAX_PARMS];
-static int num_addrs;
+static unsigned int num_addrs;
static unsigned int ports[SI_MAX_PARMS];
-static int num_ports;
+static unsigned int num_ports;
static int irqs[SI_MAX_PARMS];
-static int num_irqs;
+static unsigned int num_irqs;
static int regspacings[SI_MAX_PARMS];
-static int num_regspacings = 0;
+static unsigned int num_regspacings;
static int regsizes[SI_MAX_PARMS];
-static int num_regsizes = 0;
+static unsigned int num_regsizes;
static int regshifts[SI_MAX_PARMS];
-static int num_regshifts = 0;
+static unsigned int num_regshifts;
static int slave_addrs[SI_MAX_PARMS];
-static int num_slave_addrs = 0;
+static unsigned int num_slave_addrs;
+
+#define IPMI_IO_ADDR_SPACE 0
+#define IPMI_MEM_ADDR_SPACE 1
+static char *addr_space_to_str[] = { "i/o", "mem" };
+
+static int hotmod_handler(const char *val, struct kernel_param *kp);
+module_param_call(hotmod, hotmod_handler, NULL, NULL, 0200);
+MODULE_PARM_DESC(hotmod, "Add and remove interfaces. See"
+ " Documentation/IPMI.txt in the kernel sources for the"
+ " gory details.");
module_param_named(trydefaults, si_trydefaults, bool, 0);
MODULE_PARM_DESC(trydefaults, "Setting this to 'false' will disable the"
" interface separated by commas. The types are 'kcs',"
" 'smic', and 'bt'. For example si_type=kcs,bt will set"
" the first interface to kcs and the second to bt");
-module_param_array(addrs, long, &num_addrs, 0);
+module_param_array(addrs, ulong, &num_addrs, 0);
MODULE_PARM_DESC(addrs, "Sets the memory address of each interface, the"
" addresses separated by commas. Only use if an interface"
" is in memory. Otherwise, set it to zero or leave"
" it blank.");
-module_param_array(ports, int, &num_ports, 0);
+module_param_array(ports, uint, &num_ports, 0);
MODULE_PARM_DESC(ports, "Sets the port address of each interface, the"
" addresses separated by commas. Only use if an interface"
" is a port. Otherwise, set it to zero or leave"
" the controller. Normally this is 0x20, but can be"
" overridden by this parm. This is an array indexed"
" by interface number.");
+module_param_array(force_kipmid, int, &num_force_kipmid, 0);
+MODULE_PARM_DESC(force_kipmid, "Force the kipmi daemon to be enabled (1) or"
+ " disabled(0). Normally the IPMI driver auto-detects"
+ " this, but the value may be overridden by this parm.");
+module_param(unload_when_empty, int, 0);
+MODULE_PARM_DESC(unload_when_empty, "Unload the module if no interfaces are"
+ " specified or found, default is 1. Setting to 0"
+ " is useful for hot add of devices using hotmod.");
-#define IPMI_MEM_ADDR_SPACE 1
-#define IPMI_IO_ADDR_SPACE 2
-
-#if defined(CONFIG_ACPI) || defined(CONFIG_DMI) || defined(CONFIG_PCI)
-static int is_new_interface(int intf, u8 addr_space, unsigned long base_addr)
+static void std_irq_cleanup(struct smi_info *info)
{
- int i;
-
- for (i = 0; i < SI_MAX_PARMS; ++i) {
- /* Don't check our address. */
- if (i == intf)
- continue;
- if (si_type[i] != NULL) {
- if ((addr_space == IPMI_MEM_ADDR_SPACE &&
- base_addr == addrs[i]) ||
- (addr_space == IPMI_IO_ADDR_SPACE &&
- base_addr == ports[i]))
- return 0;
- }
- else
- break;
- }
-
- return 1;
+ if (info->si_type == SI_BT)
+ /* Disable the interrupt in the BT interface. */
+ info->io.outputb(&info->io, IPMI_BT_INTMASK_REG, 0);
+ free_irq(info->irq, info);
}
-#endif
static int std_irq_setup(struct smi_info *info)
{
int rv;
- if (! info->irq)
+ if (!info->irq)
return 0;
if (info->si_type == SI_BT) {
rv = request_irq(info->irq,
si_bt_irq_handler,
- SA_INTERRUPT,
+ IRQF_SHARED | IRQF_DISABLED,
DEVICE_NAME,
info);
- if (! rv)
+ if (!rv)
/* Enable the interrupt in the BT interface. */
info->io.outputb(&info->io, IPMI_BT_INTMASK_REG,
IPMI_BT_INTMASK_ENABLE_IRQ_BIT);
} else
rv = request_irq(info->irq,
si_irq_handler,
- SA_INTERRUPT,
+ IRQF_SHARED | IRQF_DISABLED,
DEVICE_NAME,
info);
if (rv) {
DEVICE_NAME, info->irq);
info->irq = 0;
} else {
+ info->irq_cleanup = std_irq_cleanup;
printk(" Using irq %d\n", info->irq);
}
return rv;
}
-static void std_irq_cleanup(struct smi_info *info)
-{
- if (! info->irq)
- return;
-
- if (info->si_type == SI_BT)
- /* Disable the interrupt in the BT interface. */
- info->io.outputb(&info->io, IPMI_BT_INTMASK_REG, 0);
- free_irq(info->irq, info);
-}
-
static unsigned char port_inb(struct si_sm_io *io, unsigned int offset)
{
- unsigned int *addr = io->info;
+ unsigned int addr = io->addr_data;
- return inb((*addr)+(offset*io->regspacing));
+ return inb(addr + (offset * io->regspacing));
}
static void port_outb(struct si_sm_io *io, unsigned int offset,
unsigned char b)
{
- unsigned int *addr = io->info;
+ unsigned int addr = io->addr_data;
- outb(b, (*addr)+(offset * io->regspacing));
+ outb(b, addr + (offset * io->regspacing));
}
static unsigned char port_inw(struct si_sm_io *io, unsigned int offset)
{
- unsigned int *addr = io->info;
+ unsigned int addr = io->addr_data;
- return (inw((*addr)+(offset * io->regspacing)) >> io->regshift) & 0xff;
+ return (inw(addr + (offset * io->regspacing)) >> io->regshift) & 0xff;
}
static void port_outw(struct si_sm_io *io, unsigned int offset,
unsigned char b)
{
- unsigned int *addr = io->info;
+ unsigned int addr = io->addr_data;
- outw(b << io->regshift, (*addr)+(offset * io->regspacing));
+ outw(b << io->regshift, addr + (offset * io->regspacing));
}
static unsigned char port_inl(struct si_sm_io *io, unsigned int offset)
{
- unsigned int *addr = io->info;
+ unsigned int addr = io->addr_data;
- return (inl((*addr)+(offset * io->regspacing)) >> io->regshift) & 0xff;
+ return (inl(addr + (offset * io->regspacing)) >> io->regshift) & 0xff;
}
static void port_outl(struct si_sm_io *io, unsigned int offset,
unsigned char b)
{
- unsigned int *addr = io->info;
+ unsigned int addr = io->addr_data;
- outl(b << io->regshift, (*addr)+(offset * io->regspacing));
+ outl(b << io->regshift, addr+(offset * io->regspacing));
}
static void port_cleanup(struct smi_info *info)
{
- unsigned int *addr = info->io.info;
- int mapsize;
-
- if (addr && (*addr)) {
- mapsize = ((info->io_size * info->io.regspacing)
- - (info->io.regspacing - info->io.regsize));
+ unsigned int addr = info->io.addr_data;
+ int idx;
- release_region (*addr, mapsize);
+ if (addr) {
+ for (idx = 0; idx < info->io_size; idx++)
+ release_region(addr + idx * info->io.regspacing,
+ info->io.regsize);
}
- kfree(info);
}
static int port_setup(struct smi_info *info)
{
- unsigned int *addr = info->io.info;
- int mapsize;
+ unsigned int addr = info->io.addr_data;
+ int idx;
- if (! addr || (! *addr))
+ if (!addr)
return -ENODEV;
info->io_cleanup = port_cleanup;
- /* Figure out the actual inb/inw/inl/etc routine to use based
- upon the register size. */
+ /*
+ * Figure out the actual inb/inw/inl/etc routine to use based
+ * upon the register size.
+ */
switch (info->io.regsize) {
case 1:
info->io.inputb = port_inb;
info->io.outputb = port_outl;
break;
default:
- printk("ipmi_si: Invalid register size: %d\n",
+ printk(KERN_WARNING "ipmi_si: Invalid register size: %d\n",
info->io.regsize);
return -EINVAL;
}
- /* Calculate the total amount of memory to claim. This is an
- * unusual looking calculation, but it avoids claiming any
- * more memory than it has to. It will claim everything
- * between the first address to the end of the last full
- * register. */
- mapsize = ((info->io_size * info->io.regspacing)
- - (info->io.regspacing - info->io.regsize));
-
- if (request_region(*addr, mapsize, DEVICE_NAME) == NULL)
- return -EIO;
- return 0;
-}
-
-static int try_init_port(int intf_num, struct smi_info **new_info)
-{
- struct smi_info *info;
-
- if (! ports[intf_num])
- return -ENODEV;
-
- if (! is_new_interface(intf_num, IPMI_IO_ADDR_SPACE,
- ports[intf_num]))
- return -ENODEV;
-
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (! info) {
- printk(KERN_ERR "ipmi_si: Could not allocate SI data (1)\n");
- return -ENOMEM;
+ /*
+ * Some BIOSes reserve disjoint I/O regions in their ACPI
+ * tables. This causes problems when trying to register the
+ * entire I/O region. Therefore we must register each I/O
+ * port separately.
+ */
+ for (idx = 0; idx < info->io_size; idx++) {
+ if (request_region(addr + idx * info->io.regspacing,
+ info->io.regsize, DEVICE_NAME) == NULL) {
+ /* Undo allocations */
+ while (idx--) {
+ release_region(addr + idx * info->io.regspacing,
+ info->io.regsize);
+ }
+ return -EIO;
+ }
}
- memset(info, 0, sizeof(*info));
-
- info->io_setup = port_setup;
- info->io.info = &(ports[intf_num]);
- info->io.addr = NULL;
- info->io.regspacing = regspacings[intf_num];
- if (! info->io.regspacing)
- info->io.regspacing = DEFAULT_REGSPACING;
- info->io.regsize = regsizes[intf_num];
- if (! info->io.regsize)
- info->io.regsize = DEFAULT_REGSPACING;
- info->io.regshift = regshifts[intf_num];
- info->irq = 0;
- info->irq_setup = NULL;
- *new_info = info;
-
- if (si_type[intf_num] == NULL)
- si_type[intf_num] = "kcs";
-
- printk("ipmi_si: Trying \"%s\" at I/O port 0x%x\n",
- si_type[intf_num], ports[intf_num]);
return 0;
}
static unsigned char intf_mem_inw(struct si_sm_io *io, unsigned int offset)
{
return (readw((io->addr)+(offset * io->regspacing)) >> io->regshift)
- && 0xff;
+ & 0xff;
}
static void intf_mem_outw(struct si_sm_io *io, unsigned int offset,
static unsigned char intf_mem_inl(struct si_sm_io *io, unsigned int offset)
{
return (readl((io->addr)+(offset * io->regspacing)) >> io->regshift)
- && 0xff;
+ & 0xff;
}
static void intf_mem_outl(struct si_sm_io *io, unsigned int offset,
static unsigned char mem_inq(struct si_sm_io *io, unsigned int offset)
{
return (readq((io->addr)+(offset * io->regspacing)) >> io->regshift)
- && 0xff;
+ & 0xff;
}
static void mem_outq(struct si_sm_io *io, unsigned int offset,
static void mem_cleanup(struct smi_info *info)
{
- unsigned long *addr = info->io.info;
+ unsigned long addr = info->io.addr_data;
int mapsize;
if (info->io.addr) {
mapsize = ((info->io_size * info->io.regspacing)
- (info->io.regspacing - info->io.regsize));
- release_mem_region(*addr, mapsize);
+ release_mem_region(addr, mapsize);
}
- kfree(info);
}
static int mem_setup(struct smi_info *info)
{
- unsigned long *addr = info->io.info;
+ unsigned long addr = info->io.addr_data;
int mapsize;
- if (! addr || (! *addr))
+ if (!addr)
return -ENODEV;
info->io_cleanup = mem_cleanup;
- /* Figure out the actual readb/readw/readl/etc routine to use based
- upon the register size. */
+ /*
+ * Figure out the actual readb/readw/readl/etc routine to use based
+ * upon the register size.
+ */
switch (info->io.regsize) {
case 1:
info->io.inputb = intf_mem_inb;
break;
#endif
default:
- printk("ipmi_si: Invalid register size: %d\n",
+ printk(KERN_WARNING "ipmi_si: Invalid register size: %d\n",
info->io.regsize);
return -EINVAL;
}
- /* Calculate the total amount of memory to claim. This is an
+ /*
+ * Calculate the total amount of memory to claim. This is an
* unusual looking calculation, but it avoids claiming any
* more memory than it has to. It will claim everything
* between the first address to the end of the last full
- * register. */
+ * register.
+ */
mapsize = ((info->io_size * info->io.regspacing)
- (info->io.regspacing - info->io.regsize));
- if (request_mem_region(*addr, mapsize, DEVICE_NAME) == NULL)
+ if (request_mem_region(addr, mapsize, DEVICE_NAME) == NULL)
return -EIO;
- info->io.addr = ioremap(*addr, mapsize);
+ info->io.addr = ioremap(addr, mapsize);
if (info->io.addr == NULL) {
- release_mem_region(*addr, mapsize);
+ release_mem_region(addr, mapsize);
return -EIO;
}
return 0;
}
-static int try_init_mem(int intf_num, struct smi_info **new_info)
+/*
+ * Parms come in as <op1>[:op2[:op3...]]. ops are:
+ * add|remove,kcs|bt|smic,mem|i/o,<address>[,<opt1>[,<opt2>[,...]]]
+ * Options are:
+ * rsp=<regspacing>
+ * rsi=<regsize>
+ * rsh=<regshift>
+ * irq=<irq>
+ * ipmb=<ipmb addr>
+ */
+enum hotmod_op { HM_ADD, HM_REMOVE };
+struct hotmod_vals {
+ char *name;
+ int val;
+};
+static struct hotmod_vals hotmod_ops[] = {
+ { "add", HM_ADD },
+ { "remove", HM_REMOVE },
+ { NULL }
+};
+static struct hotmod_vals hotmod_si[] = {
+ { "kcs", SI_KCS },
+ { "smic", SI_SMIC },
+ { "bt", SI_BT },
+ { NULL }
+};
+static struct hotmod_vals hotmod_as[] = {
+ { "mem", IPMI_MEM_ADDR_SPACE },
+ { "i/o", IPMI_IO_ADDR_SPACE },
+ { NULL }
+};
+
+static int parse_str(struct hotmod_vals *v, int *val, char *name, char **curr)
{
- struct smi_info *info;
+ char *s;
+ int i;
- if (! addrs[intf_num])
- return -ENODEV;
+ s = strchr(*curr, ',');
+ if (!s) {
+ printk(KERN_WARNING PFX "No hotmod %s given.\n", name);
+ return -EINVAL;
+ }
+ *s = '\0';
+ s++;
+ for (i = 0; hotmod_ops[i].name; i++) {
+ if (strcmp(*curr, v[i].name) == 0) {
+ *val = v[i].val;
+ *curr = s;
+ return 0;
+ }
+ }
- if (! is_new_interface(intf_num, IPMI_MEM_ADDR_SPACE,
- addrs[intf_num]))
- return -ENODEV;
+ printk(KERN_WARNING PFX "Invalid hotmod %s '%s'\n", name, *curr);
+ return -EINVAL;
+}
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (! info) {
- printk(KERN_ERR "ipmi_si: Could not allocate SI data (2)\n");
- return -ENOMEM;
+static int check_hotmod_int_op(const char *curr, const char *option,
+ const char *name, int *val)
+{
+ char *n;
+
+ if (strcmp(curr, name) == 0) {
+ if (!option) {
+ printk(KERN_WARNING PFX
+ "No option given for '%s'\n",
+ curr);
+ return -EINVAL;
+ }
+ *val = simple_strtoul(option, &n, 0);
+ if ((*n != '\0') || (*option == '\0')) {
+ printk(KERN_WARNING PFX
+ "Bad option given for '%s'\n",
+ curr);
+ return -EINVAL;
+ }
+ return 1;
}
- memset(info, 0, sizeof(*info));
+ return 0;
+}
- info->io_setup = mem_setup;
- info->io.info = &addrs[intf_num];
- info->io.addr = NULL;
- info->io.regspacing = regspacings[intf_num];
- if (! info->io.regspacing)
- info->io.regspacing = DEFAULT_REGSPACING;
- info->io.regsize = regsizes[intf_num];
- if (! info->io.regsize)
- info->io.regsize = DEFAULT_REGSPACING;
- info->io.regshift = regshifts[intf_num];
- info->irq = 0;
- info->irq_setup = NULL;
- *new_info = info;
+static int hotmod_handler(const char *val, struct kernel_param *kp)
+{
+ char *str = kstrdup(val, GFP_KERNEL);
+ int rv;
+ char *next, *curr, *s, *n, *o;
+ enum hotmod_op op;
+ enum si_type si_type;
+ int addr_space;
+ unsigned long addr;
+ int regspacing;
+ int regsize;
+ int regshift;
+ int irq;
+ int ipmb;
+ int ival;
+ int len;
+ struct smi_info *info;
- if (si_type[intf_num] == NULL)
- si_type[intf_num] = "kcs";
+ if (!str)
+ return -ENOMEM;
- printk("ipmi_si: Trying \"%s\" at memory address 0x%lx\n",
- si_type[intf_num], addrs[intf_num]);
- return 0;
+ /* Kill any trailing spaces, as we can get a "\n" from echo. */
+ len = strlen(str);
+ ival = len - 1;
+ while ((ival >= 0) && isspace(str[ival])) {
+ str[ival] = '\0';
+ ival--;
+ }
+
+ for (curr = str; curr; curr = next) {
+ regspacing = 1;
+ regsize = 1;
+ regshift = 0;
+ irq = 0;
+ ipmb = 0x20;
+
+ next = strchr(curr, ':');
+ if (next) {
+ *next = '\0';
+ next++;
+ }
+
+ rv = parse_str(hotmod_ops, &ival, "operation", &curr);
+ if (rv)
+ break;
+ op = ival;
+
+ rv = parse_str(hotmod_si, &ival, "interface type", &curr);
+ if (rv)
+ break;
+ si_type = ival;
+
+ rv = parse_str(hotmod_as, &addr_space, "address space", &curr);
+ if (rv)
+ break;
+
+ s = strchr(curr, ',');
+ if (s) {
+ *s = '\0';
+ s++;
+ }
+ addr = simple_strtoul(curr, &n, 0);
+ if ((*n != '\0') || (*curr == '\0')) {
+ printk(KERN_WARNING PFX "Invalid hotmod address"
+ " '%s'\n", curr);
+ break;
+ }
+
+ while (s) {
+ curr = s;
+ s = strchr(curr, ',');
+ if (s) {
+ *s = '\0';
+ s++;
+ }
+ o = strchr(curr, '=');
+ if (o) {
+ *o = '\0';
+ o++;
+ }
+ rv = check_hotmod_int_op(curr, o, "rsp", ®spacing);
+ if (rv < 0)
+ goto out;
+ else if (rv)
+ continue;
+ rv = check_hotmod_int_op(curr, o, "rsi", ®size);
+ if (rv < 0)
+ goto out;
+ else if (rv)
+ continue;
+ rv = check_hotmod_int_op(curr, o, "rsh", ®shift);
+ if (rv < 0)
+ goto out;
+ else if (rv)
+ continue;
+ rv = check_hotmod_int_op(curr, o, "irq", &irq);
+ if (rv < 0)
+ goto out;
+ else if (rv)
+ continue;
+ rv = check_hotmod_int_op(curr, o, "ipmb", &ipmb);
+ if (rv < 0)
+ goto out;
+ else if (rv)
+ continue;
+
+ rv = -EINVAL;
+ printk(KERN_WARNING PFX
+ "Invalid hotmod option '%s'\n",
+ curr);
+ goto out;
+ }
+
+ if (op == HM_ADD) {
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ rv = -ENOMEM;
+ goto out;
+ }
+
+ info->addr_source = "hotmod";
+ info->si_type = si_type;
+ info->io.addr_data = addr;
+ info->io.addr_type = addr_space;
+ if (addr_space == IPMI_MEM_ADDR_SPACE)
+ info->io_setup = mem_setup;
+ else
+ info->io_setup = port_setup;
+
+ info->io.addr = NULL;
+ info->io.regspacing = regspacing;
+ if (!info->io.regspacing)
+ info->io.regspacing = DEFAULT_REGSPACING;
+ info->io.regsize = regsize;
+ if (!info->io.regsize)
+ info->io.regsize = DEFAULT_REGSPACING;
+ info->io.regshift = regshift;
+ info->irq = irq;
+ if (info->irq)
+ info->irq_setup = std_irq_setup;
+ info->slave_addr = ipmb;
+
+ try_smi_init(info);
+ } else {
+ /* remove */
+ struct smi_info *e, *tmp_e;
+
+ mutex_lock(&smi_infos_lock);
+ list_for_each_entry_safe(e, tmp_e, &smi_infos, link) {
+ if (e->io.addr_type != addr_space)
+ continue;
+ if (e->si_type != si_type)
+ continue;
+ if (e->io.addr_data == addr)
+ cleanup_one_si(e);
+ }
+ mutex_unlock(&smi_infos_lock);
+ }
+ }
+ rv = len;
+ out:
+ kfree(str);
+ return rv;
}
+static __devinit void hardcode_find_bmc(void)
+{
+ int i;
+ struct smi_info *info;
+
+ for (i = 0; i < SI_MAX_PARMS; i++) {
+ if (!ports[i] && !addrs[i])
+ continue;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return;
+
+ info->addr_source = "hardcoded";
+
+ if (!si_type[i] || strcmp(si_type[i], "kcs") == 0) {
+ info->si_type = SI_KCS;
+ } else if (strcmp(si_type[i], "smic") == 0) {
+ info->si_type = SI_SMIC;
+ } else if (strcmp(si_type[i], "bt") == 0) {
+ info->si_type = SI_BT;
+ } else {
+ printk(KERN_WARNING
+ "ipmi_si: Interface type specified "
+ "for interface %d, was invalid: %s\n",
+ i, si_type[i]);
+ kfree(info);
+ continue;
+ }
+
+ if (ports[i]) {
+ /* An I/O port */
+ info->io_setup = port_setup;
+ info->io.addr_data = ports[i];
+ info->io.addr_type = IPMI_IO_ADDR_SPACE;
+ } else if (addrs[i]) {
+ /* A memory port */
+ info->io_setup = mem_setup;
+ info->io.addr_data = addrs[i];
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
+ } else {
+ printk(KERN_WARNING
+ "ipmi_si: Interface type specified "
+ "for interface %d, "
+ "but port and address were not set or "
+ "set to zero.\n", i);
+ kfree(info);
+ continue;
+ }
+
+ info->io.addr = NULL;
+ info->io.regspacing = regspacings[i];
+ if (!info->io.regspacing)
+ info->io.regspacing = DEFAULT_REGSPACING;
+ info->io.regsize = regsizes[i];
+ if (!info->io.regsize)
+ info->io.regsize = DEFAULT_REGSPACING;
+ info->io.regshift = regshifts[i];
+ info->irq = irqs[i];
+ if (info->irq)
+ info->irq_setup = std_irq_setup;
+
+ try_smi_init(info);
+ }
+}
#ifdef CONFIG_ACPI
#include <linux/acpi.h>
-/* Once we get an ACPI failure, we don't try any more, because we go
- through the tables sequentially. Once we don't find a table, there
- are no more. */
-static int acpi_failure = 0;
+/*
+ * Once we get an ACPI failure, we don't try any more, because we go
+ * through the tables sequentially. Once we don't find a table, there
+ * are no more.
+ */
+static int acpi_failure;
/* For GPE-type interrupts. */
static u32 ipmi_acpi_gpe(void *context)
spin_lock_irqsave(&(smi_info->si_lock), flags);
- spin_lock(&smi_info->count_lock);
- smi_info->interrupts++;
- spin_unlock(&smi_info->count_lock);
-
- if (atomic_read(&smi_info->stop_operation))
- goto out;
+ smi_inc_stat(smi_info, interrupts);
#ifdef DEBUG_TIMING
do_gettimeofday(&t);
printk("**ACPI_GPE: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
smi_event_handler(smi_info, 0);
- out:
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
return ACPI_INTERRUPT_HANDLED;
}
+static void acpi_gpe_irq_cleanup(struct smi_info *info)
+{
+ if (!info->irq)
+ return;
+
+ acpi_remove_gpe_handler(NULL, info->irq, &ipmi_acpi_gpe);
+}
+
static int acpi_gpe_irq_setup(struct smi_info *info)
{
acpi_status status;
- if (! info->irq)
+ if (!info->irq)
return 0;
/* FIXME - is level triggered right? */
info->irq = 0;
return -EINVAL;
} else {
+ info->irq_cleanup = acpi_gpe_irq_cleanup;
printk(" Using ACPI GPE %d\n", info->irq);
return 0;
}
}
-static void acpi_gpe_irq_cleanup(struct smi_info *info)
-{
- if (! info->irq)
- return;
-
- acpi_remove_gpe_handler(NULL, info->irq, &ipmi_acpi_gpe);
-}
-
/*
* Defined at
- * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/Docs/TechPapers/IA64/hpspmi.pdf
+ * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/
+ * Docs/TechPapers/IA64/hpspmi.pdf
*/
struct SPMITable {
s8 Signature[4];
*/
u8 InterruptType;
- /* If bit 0 of InterruptType is set, then this is the SCI
- interrupt in the GPEx_STS register. */
+ /*
+ * If bit 0 of InterruptType is set, then this is the SCI
+ * interrupt in the GPEx_STS register.
+ */
u8 GPE;
s16 Reserved;
- /* If bit 1 of InterruptType is set, then this is the I/O
- APIC/SAPIC interrupt. */
+ /*
+ * If bit 1 of InterruptType is set, then this is the I/O
+ * APIC/SAPIC interrupt.
+ */
u32 GlobalSystemInterrupt;
/* The actual register address. */
s8 spmi_id[1]; /* A '\0' terminated array starts here. */
};
-static int try_init_acpi(int intf_num, struct smi_info **new_info)
+static __devinit int try_init_spmi(struct SPMITable *spmi)
{
struct smi_info *info;
- acpi_status status;
- struct SPMITable *spmi;
- char *io_type;
u8 addr_space;
- if (acpi_disabled)
- return -ENODEV;
-
- if (acpi_failure)
- return -ENODEV;
-
- status = acpi_get_firmware_table("SPMI", intf_num+1,
- ACPI_LOGICAL_ADDRESSING,
- (struct acpi_table_header **) &spmi);
- if (status != AE_OK) {
- acpi_failure = 1;
- return -ENODEV;
- }
-
if (spmi->IPMIlegacy != 1) {
printk(KERN_INFO "IPMI: Bad SPMI legacy %d\n", spmi->IPMIlegacy);
- return -ENODEV;
+ return -ENODEV;
}
- if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
+ if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
addr_space = IPMI_MEM_ADDR_SPACE;
else
addr_space = IPMI_IO_ADDR_SPACE;
- if (! is_new_interface(-1, addr_space, spmi->addr.address))
- return -ENODEV;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ printk(KERN_ERR "ipmi_si: Could not allocate SI data (3)\n");
+ return -ENOMEM;
+ }
+
+ info->addr_source = "SPMI";
/* Figure out the interface type. */
- switch (spmi->InterfaceType)
- {
+ switch (spmi->InterfaceType) {
case 1: /* KCS */
- si_type[intf_num] = "kcs";
+ info->si_type = SI_KCS;
break;
-
case 2: /* SMIC */
- si_type[intf_num] = "smic";
+ info->si_type = SI_SMIC;
break;
-
case 3: /* BT */
- si_type[intf_num] = "bt";
+ info->si_type = SI_BT;
break;
-
default:
printk(KERN_INFO "ipmi_si: Unknown ACPI/SPMI SI type %d\n",
spmi->InterfaceType);
+ kfree(info);
return -EIO;
}
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (! info) {
- printk(KERN_ERR "ipmi_si: Could not allocate SI data (3)\n");
- return -ENOMEM;
- }
- memset(info, 0, sizeof(*info));
-
if (spmi->InterruptType & 1) {
/* We've got a GPE interrupt. */
info->irq = spmi->GPE;
info->irq_setup = acpi_gpe_irq_setup;
- info->irq_cleanup = acpi_gpe_irq_cleanup;
} else if (spmi->InterruptType & 2) {
/* We've got an APIC/SAPIC interrupt. */
info->irq = spmi->GlobalSystemInterrupt;
info->irq_setup = std_irq_setup;
- info->irq_cleanup = std_irq_cleanup;
} else {
/* Use the default interrupt setting. */
info->irq = 0;
info->irq_setup = NULL;
}
- if (spmi->addr.register_bit_width) {
+ if (spmi->addr.bit_width) {
/* A (hopefully) properly formed register bit width. */
- regspacings[intf_num] = spmi->addr.register_bit_width / 8;
- info->io.regspacing = spmi->addr.register_bit_width / 8;
+ info->io.regspacing = spmi->addr.bit_width / 8;
} else {
- regspacings[intf_num] = DEFAULT_REGSPACING;
info->io.regspacing = DEFAULT_REGSPACING;
}
- regsizes[intf_num] = regspacings[intf_num];
- info->io.regsize = regsizes[intf_num];
- regshifts[intf_num] = spmi->addr.register_bit_offset;
- info->io.regshift = regshifts[intf_num];
+ info->io.regsize = info->io.regspacing;
+ info->io.regshift = spmi->addr.bit_offset;
- if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
- io_type = "memory";
+ if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
info->io_setup = mem_setup;
- addrs[intf_num] = spmi->addr.address;
- info->io.info = &(addrs[intf_num]);
- } else if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
- io_type = "I/O";
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
+ } else if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
info->io_setup = port_setup;
- ports[intf_num] = spmi->addr.address;
- info->io.info = &(ports[intf_num]);
+ info->io.addr_type = IPMI_IO_ADDR_SPACE;
} else {
kfree(info);
- printk("ipmi_si: Unknown ACPI I/O Address type\n");
+ printk(KERN_WARNING
+ "ipmi_si: Unknown ACPI I/O Address type\n");
return -EIO;
}
+ info->io.addr_data = spmi->addr.address;
- *new_info = info;
+ try_smi_init(info);
- printk("ipmi_si: ACPI/SPMI specifies \"%s\" %s SI @ 0x%lx\n",
- si_type[intf_num], io_type, (unsigned long) spmi->addr.address);
return 0;
}
+
+static __devinit void spmi_find_bmc(void)
+{
+ acpi_status status;
+ struct SPMITable *spmi;
+ int i;
+
+ if (acpi_disabled)
+ return;
+
+ if (acpi_failure)
+ return;
+
+ for (i = 0; ; i++) {
+ status = acpi_get_table(ACPI_SIG_SPMI, i+1,
+ (struct acpi_table_header **)&spmi);
+ if (status != AE_OK)
+ return;
+
+ try_init_spmi(spmi);
+ }
+}
+
+static int __devinit ipmi_pnp_probe(struct pnp_dev *dev,
+ const struct pnp_device_id *dev_id)
+{
+ struct acpi_device *acpi_dev;
+ struct smi_info *info;
+ acpi_handle handle;
+ acpi_status status;
+ unsigned long long tmp;
+
+ acpi_dev = pnp_acpi_device(dev);
+ if (!acpi_dev)
+ return -ENODEV;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->addr_source = "ACPI";
+
+ handle = acpi_dev->handle;
+
+ /* _IFT tells us the interface type: KCS, BT, etc */
+ status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp);
+ if (ACPI_FAILURE(status))
+ goto err_free;
+
+ switch (tmp) {
+ case 1:
+ info->si_type = SI_KCS;
+ break;
+ case 2:
+ info->si_type = SI_SMIC;
+ break;
+ case 3:
+ info->si_type = SI_BT;
+ break;
+ default:
+ dev_info(&dev->dev, "unknown interface type %lld\n", tmp);
+ goto err_free;
+ }
+
+ if (pnp_port_valid(dev, 0)) {
+ info->io_setup = port_setup;
+ info->io.addr_type = IPMI_IO_ADDR_SPACE;
+ info->io.addr_data = pnp_port_start(dev, 0);
+ } else if (pnp_mem_valid(dev, 0)) {
+ info->io_setup = mem_setup;
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
+ info->io.addr_data = pnp_mem_start(dev, 0);
+ } else {
+ dev_err(&dev->dev, "no I/O or memory address\n");
+ goto err_free;
+ }
+
+ info->io.regspacing = DEFAULT_REGSPACING;
+ info->io.regsize = DEFAULT_REGSPACING;
+ info->io.regshift = 0;
+
+ /* If _GPE exists, use it; otherwise use standard interrupts */
+ status = acpi_evaluate_integer(handle, "_GPE", NULL, &tmp);
+ if (ACPI_SUCCESS(status)) {
+ info->irq = tmp;
+ info->irq_setup = acpi_gpe_irq_setup;
+ } else if (pnp_irq_valid(dev, 0)) {
+ info->irq = pnp_irq(dev, 0);
+ info->irq_setup = std_irq_setup;
+ }
+
+ info->dev = &acpi_dev->dev;
+ pnp_set_drvdata(dev, info);
+
+ return try_smi_init(info);
+
+err_free:
+ kfree(info);
+ return -EINVAL;
+}
+
+static void __devexit ipmi_pnp_remove(struct pnp_dev *dev)
+{
+ struct smi_info *info = pnp_get_drvdata(dev);
+
+ cleanup_one_si(info);
+}
+
+static const struct pnp_device_id pnp_dev_table[] = {
+ {"IPI0001", 0},
+ {"", 0},
+};
+
+static struct pnp_driver ipmi_pnp_driver = {
+ .name = DEVICE_NAME,
+ .probe = ipmi_pnp_probe,
+ .remove = __devexit_p(ipmi_pnp_remove),
+ .id_table = pnp_dev_table,
+};
#endif
#ifdef CONFIG_DMI
-typedef struct dmi_ipmi_data
-{
+struct dmi_ipmi_data {
u8 type;
u8 addr_space;
unsigned long base_addr;
u8 irq;
u8 offset;
u8 slave_addr;
-} dmi_ipmi_data_t;
-
-static dmi_ipmi_data_t dmi_data[SI_MAX_DRIVERS];
-static int dmi_data_entries;
+};
-static int __init decode_dmi(struct dmi_header *dm, int intf_num)
+static int __devinit decode_dmi(const struct dmi_header *dm,
+ struct dmi_ipmi_data *dmi)
{
- u8 *data = (u8 *)dm;
+ const u8 *data = (const u8 *)dm;
unsigned long base_addr;
u8 reg_spacing;
u8 len = dm->length;
- dmi_ipmi_data_t *ipmi_data = dmi_data+intf_num;
- ipmi_data->type = data[4];
+ dmi->type = data[4];
memcpy(&base_addr, data+8, sizeof(unsigned long));
if (len >= 0x11) {
if (base_addr & 1) {
/* I/O */
base_addr &= 0xFFFE;
- ipmi_data->addr_space = IPMI_IO_ADDR_SPACE;
- }
- else {
+ dmi->addr_space = IPMI_IO_ADDR_SPACE;
+ } else
/* Memory */
- ipmi_data->addr_space = IPMI_MEM_ADDR_SPACE;
- }
+ dmi->addr_space = IPMI_MEM_ADDR_SPACE;
+
/* If bit 4 of byte 0x10 is set, then the lsb for the address
is odd. */
- ipmi_data->base_addr = base_addr | ((data[0x10] & 0x10) >> 4);
+ dmi->base_addr = base_addr | ((data[0x10] & 0x10) >> 4);
- ipmi_data->irq = data[0x11];
+ dmi->irq = data[0x11];
/* The top two bits of byte 0x10 hold the register spacing. */
reg_spacing = (data[0x10] & 0xC0) >> 6;
- switch(reg_spacing){
+ switch (reg_spacing) {
case 0x00: /* Byte boundaries */
- ipmi_data->offset = 1;
+ dmi->offset = 1;
break;
case 0x01: /* 32-bit boundaries */
- ipmi_data->offset = 4;
+ dmi->offset = 4;
break;
case 0x02: /* 16-byte boundaries */
- ipmi_data->offset = 16;
+ dmi->offset = 16;
break;
default:
/* Some other interface, just ignore it. */
}
} else {
/* Old DMI spec. */
- /* Note that technically, the lower bit of the base
+ /*
+ * Note that technically, the lower bit of the base
* address should be 1 if the address is I/O and 0 if
* the address is in memory. So many systems get that
* wrong (and all that I have seen are I/O) so we just
* ignore that bit and assume I/O. Systems that use
- * memory should use the newer spec, anyway. */
- ipmi_data->base_addr = base_addr & 0xfffe;
- ipmi_data->addr_space = IPMI_IO_ADDR_SPACE;
- ipmi_data->offset = 1;
+ * memory should use the newer spec, anyway.
+ */
+ dmi->base_addr = base_addr & 0xfffe;
+ dmi->addr_space = IPMI_IO_ADDR_SPACE;
+ dmi->offset = 1;
}
- ipmi_data->slave_addr = data[6];
+ dmi->slave_addr = data[6];
- if (is_new_interface(-1, ipmi_data->addr_space,ipmi_data->base_addr)) {
- dmi_data_entries++;
- return 0;
+ return 0;
+}
+
+static __devinit void try_init_dmi(struct dmi_ipmi_data *ipmi_data)
+{
+ struct smi_info *info;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ printk(KERN_ERR
+ "ipmi_si: Could not allocate SI data\n");
+ return;
}
- memset(ipmi_data, 0, sizeof(dmi_ipmi_data_t));
+ info->addr_source = "SMBIOS";
+
+ switch (ipmi_data->type) {
+ case 0x01: /* KCS */
+ info->si_type = SI_KCS;
+ break;
+ case 0x02: /* SMIC */
+ info->si_type = SI_SMIC;
+ break;
+ case 0x03: /* BT */
+ info->si_type = SI_BT;
+ break;
+ default:
+ kfree(info);
+ return;
+ }
- return -1;
+ switch (ipmi_data->addr_space) {
+ case IPMI_MEM_ADDR_SPACE:
+ info->io_setup = mem_setup;
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
+ break;
+
+ case IPMI_IO_ADDR_SPACE:
+ info->io_setup = port_setup;
+ info->io.addr_type = IPMI_IO_ADDR_SPACE;
+ break;
+
+ default:
+ kfree(info);
+ printk(KERN_WARNING
+ "ipmi_si: Unknown SMBIOS I/O Address type: %d.\n",
+ ipmi_data->addr_space);
+ return;
+ }
+ info->io.addr_data = ipmi_data->base_addr;
+
+ info->io.regspacing = ipmi_data->offset;
+ if (!info->io.regspacing)
+ info->io.regspacing = DEFAULT_REGSPACING;
+ info->io.regsize = DEFAULT_REGSPACING;
+ info->io.regshift = 0;
+
+ info->slave_addr = ipmi_data->slave_addr;
+
+ info->irq = ipmi_data->irq;
+ if (info->irq)
+ info->irq_setup = std_irq_setup;
+
+ try_smi_init(info);
}
-static void __init dmi_find_bmc(void)
+static void __devinit dmi_find_bmc(void)
{
- struct dmi_device *dev = NULL;
- int intf_num = 0;
+ const struct dmi_device *dev = NULL;
+ struct dmi_ipmi_data data;
+ int rv;
while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) {
- if (intf_num >= SI_MAX_DRIVERS)
- break;
-
- decode_dmi((struct dmi_header *) dev->device_data, intf_num++);
+ memset(&data, 0, sizeof(data));
+ rv = decode_dmi((const struct dmi_header *) dev->device_data,
+ &data);
+ if (!rv)
+ try_init_dmi(&data);
}
}
+#endif /* CONFIG_DMI */
-static int try_init_smbios(int intf_num, struct smi_info **new_info)
+#ifdef CONFIG_PCI
+
+#define PCI_ERMC_CLASSCODE 0x0C0700
+#define PCI_ERMC_CLASSCODE_MASK 0xffffff00
+#define PCI_ERMC_CLASSCODE_TYPE_MASK 0xff
+#define PCI_ERMC_CLASSCODE_TYPE_SMIC 0x00
+#define PCI_ERMC_CLASSCODE_TYPE_KCS 0x01
+#define PCI_ERMC_CLASSCODE_TYPE_BT 0x02
+
+#define PCI_HP_VENDOR_ID 0x103C
+#define PCI_MMC_DEVICE_ID 0x121A
+#define PCI_MMC_ADDR_CW 0x10
+
+static void ipmi_pci_cleanup(struct smi_info *info)
+{
+ struct pci_dev *pdev = info->addr_source_data;
+
+ pci_disable_device(pdev);
+}
+
+static int __devinit ipmi_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
+ int rv;
+ int class_type = pdev->class & PCI_ERMC_CLASSCODE_TYPE_MASK;
struct smi_info *info;
- dmi_ipmi_data_t *ipmi_data = dmi_data+intf_num;
- char *io_type;
- if (intf_num >= dmi_data_entries)
- return -ENODEV;
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
- switch (ipmi_data->type) {
- case 0x01: /* KCS */
- si_type[intf_num] = "kcs";
- break;
- case 0x02: /* SMIC */
- si_type[intf_num] = "smic";
- break;
- case 0x03: /* BT */
- si_type[intf_num] = "bt";
- break;
- default:
- return -EIO;
- }
+ info->addr_source = "PCI";
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (! info) {
- printk(KERN_ERR "ipmi_si: Could not allocate SI data (4)\n");
+ switch (class_type) {
+ case PCI_ERMC_CLASSCODE_TYPE_SMIC:
+ info->si_type = SI_SMIC;
+ break;
+
+ case PCI_ERMC_CLASSCODE_TYPE_KCS:
+ info->si_type = SI_KCS;
+ break;
+
+ case PCI_ERMC_CLASSCODE_TYPE_BT:
+ info->si_type = SI_BT;
+ break;
+
+ default:
+ kfree(info);
+ printk(KERN_INFO "ipmi_si: %s: Unknown IPMI type: %d\n",
+ pci_name(pdev), class_type);
return -ENOMEM;
}
- memset(info, 0, sizeof(*info));
- if (ipmi_data->addr_space == 1) {
- io_type = "memory";
- info->io_setup = mem_setup;
- addrs[intf_num] = ipmi_data->base_addr;
- info->io.info = &(addrs[intf_num]);
- } else if (ipmi_data->addr_space == 2) {
- io_type = "I/O";
+ rv = pci_enable_device(pdev);
+ if (rv) {
+ printk(KERN_ERR "ipmi_si: %s: couldn't enable PCI device\n",
+ pci_name(pdev));
+ kfree(info);
+ return rv;
+ }
+
+ info->addr_source_cleanup = ipmi_pci_cleanup;
+ info->addr_source_data = pdev;
+
+ if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) {
info->io_setup = port_setup;
- ports[intf_num] = ipmi_data->base_addr;
- info->io.info = &(ports[intf_num]);
+ info->io.addr_type = IPMI_IO_ADDR_SPACE;
} else {
- kfree(info);
- printk("ipmi_si: Unknown SMBIOS I/O Address type.\n");
- return -EIO;
+ info->io_setup = mem_setup;
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
}
+ info->io.addr_data = pci_resource_start(pdev, 0);
- regspacings[intf_num] = ipmi_data->offset;
- info->io.regspacing = regspacings[intf_num];
- if (! info->io.regspacing)
- info->io.regspacing = DEFAULT_REGSPACING;
+ info->io.regspacing = DEFAULT_REGSPACING;
info->io.regsize = DEFAULT_REGSPACING;
- info->io.regshift = regshifts[intf_num];
+ info->io.regshift = 0;
- info->slave_addr = ipmi_data->slave_addr;
+ info->irq = pdev->irq;
+ if (info->irq)
+ info->irq_setup = std_irq_setup;
- irqs[intf_num] = ipmi_data->irq;
+ info->dev = &pdev->dev;
+ pci_set_drvdata(pdev, info);
- *new_info = info;
+ return try_smi_init(info);
+}
- printk("ipmi_si: Found SMBIOS-specified state machine at %s"
- " address 0x%lx, slave address 0x%x\n",
- io_type, (unsigned long)ipmi_data->base_addr,
- ipmi_data->slave_addr);
+static void __devexit ipmi_pci_remove(struct pci_dev *pdev)
+{
+ struct smi_info *info = pci_get_drvdata(pdev);
+ cleanup_one_si(info);
+}
+
+#ifdef CONFIG_PM
+static int ipmi_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
return 0;
}
-#endif /* CONFIG_DMI */
-#ifdef CONFIG_PCI
+static int ipmi_pci_resume(struct pci_dev *pdev)
+{
+ return 0;
+}
+#endif
-#define PCI_ERMC_CLASSCODE 0x0C0700
-#define PCI_HP_VENDOR_ID 0x103C
-#define PCI_MMC_DEVICE_ID 0x121A
-#define PCI_MMC_ADDR_CW 0x10
+static struct pci_device_id ipmi_pci_devices[] = {
+ { PCI_DEVICE(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID) },
+ { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE_MASK) },
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, ipmi_pci_devices);
+
+static struct pci_driver ipmi_pci_driver = {
+ .name = DEVICE_NAME,
+ .id_table = ipmi_pci_devices,
+ .probe = ipmi_pci_probe,
+ .remove = __devexit_p(ipmi_pci_remove),
+#ifdef CONFIG_PM
+ .suspend = ipmi_pci_suspend,
+ .resume = ipmi_pci_resume,
+#endif
+};
+#endif /* CONFIG_PCI */
-/* Avoid more than one attempt to probe pci smic. */
-static int pci_smic_checked = 0;
-static int find_pci_smic(int intf_num, struct smi_info **new_info)
+#ifdef CONFIG_PPC_OF
+static int __devinit ipmi_of_probe(struct of_device *dev,
+ const struct of_device_id *match)
{
- struct smi_info *info;
- int error;
- struct pci_dev *pci_dev = NULL;
- u16 base_addr;
- int fe_rmc = 0;
+ struct smi_info *info;
+ struct resource resource;
+ const int *regsize, *regspacing, *regshift;
+ struct device_node *np = dev->node;
+ int ret;
+ int proplen;
- if (pci_smic_checked)
- return -ENODEV;
+ dev_info(&dev->dev, PFX "probing via device tree\n");
- pci_smic_checked = 1;
+ ret = of_address_to_resource(np, 0, &resource);
+ if (ret) {
+ dev_warn(&dev->dev, PFX "invalid address from OF\n");
+ return ret;
+ }
- pci_dev = pci_get_device(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID, NULL);
- if (! pci_dev) {
- pci_dev = pci_get_class(PCI_ERMC_CLASSCODE, NULL);
- if (pci_dev && (pci_dev->subsystem_vendor == PCI_HP_VENDOR_ID))
- fe_rmc = 1;
- else
- return -ENODEV;
+ regsize = of_get_property(np, "reg-size", &proplen);
+ if (regsize && proplen != 4) {
+ dev_warn(&dev->dev, PFX "invalid regsize from OF\n");
+ return -EINVAL;
}
- error = pci_read_config_word(pci_dev, PCI_MMC_ADDR_CW, &base_addr);
- if (error)
- {
- pci_dev_put(pci_dev);
- printk(KERN_ERR
- "ipmi_si: pci_read_config_word() failed (%d).\n",
- error);
- return -ENODEV;
+ regspacing = of_get_property(np, "reg-spacing", &proplen);
+ if (regspacing && proplen != 4) {
+ dev_warn(&dev->dev, PFX "invalid regspacing from OF\n");
+ return -EINVAL;
}
- /* Bit 0: 1 specifies programmed I/O, 0 specifies memory mapped I/O */
- if (! (base_addr & 0x0001))
- {
- pci_dev_put(pci_dev);
- printk(KERN_ERR
- "ipmi_si: memory mapped I/O not supported for PCI"
- " smic.\n");
- return -ENODEV;
+ regshift = of_get_property(np, "reg-shift", &proplen);
+ if (regshift && proplen != 4) {
+ dev_warn(&dev->dev, PFX "invalid regshift from OF\n");
+ return -EINVAL;
}
- base_addr &= 0xFFFE;
- if (! fe_rmc)
- /* Data register starts at base address + 1 in eRMC */
- ++base_addr;
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
- if (! is_new_interface(-1, IPMI_IO_ADDR_SPACE, base_addr)) {
- pci_dev_put(pci_dev);
- return -ENODEV;
+ if (!info) {
+ dev_err(&dev->dev,
+ PFX "could not allocate memory for OF probe\n");
+ return -ENOMEM;
}
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (! info) {
- pci_dev_put(pci_dev);
- printk(KERN_ERR "ipmi_si: Could not allocate SI data (5)\n");
- return -ENOMEM;
+ info->si_type = (enum si_type) match->data;
+ info->addr_source = "device-tree";
+ info->irq_setup = std_irq_setup;
+
+ if (resource.flags & IORESOURCE_IO) {
+ info->io_setup = port_setup;
+ info->io.addr_type = IPMI_IO_ADDR_SPACE;
+ } else {
+ info->io_setup = mem_setup;
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
}
- memset(info, 0, sizeof(*info));
- info->io_setup = port_setup;
- ports[intf_num] = base_addr;
- info->io.info = &(ports[intf_num]);
- info->io.regspacing = regspacings[intf_num];
- if (! info->io.regspacing)
- info->io.regspacing = DEFAULT_REGSPACING;
- info->io.regsize = DEFAULT_REGSPACING;
- info->io.regshift = regshifts[intf_num];
+ info->io.addr_data = resource.start;
- *new_info = info;
+ info->io.regsize = regsize ? *regsize : DEFAULT_REGSIZE;
+ info->io.regspacing = regspacing ? *regspacing : DEFAULT_REGSPACING;
+ info->io.regshift = regshift ? *regshift : 0;
- irqs[intf_num] = pci_dev->irq;
- si_type[intf_num] = "smic";
+ info->irq = irq_of_parse_and_map(dev->node, 0);
+ info->dev = &dev->dev;
- printk("ipmi_si: Found PCI SMIC at I/O address 0x%lx\n",
- (long unsigned int) base_addr);
+ dev_dbg(&dev->dev, "addr 0x%lx regsize %d spacing %d irq %x\n",
+ info->io.addr_data, info->io.regsize, info->io.regspacing,
+ info->irq);
- pci_dev_put(pci_dev);
- return 0;
+ dev_set_drvdata(&dev->dev, info);
+
+ return try_smi_init(info);
}
-#endif /* CONFIG_PCI */
-static int try_init_plug_and_play(int intf_num, struct smi_info **new_info)
+static int __devexit ipmi_of_remove(struct of_device *dev)
{
-#ifdef CONFIG_PCI
- if (find_pci_smic(intf_num, new_info) == 0)
- return 0;
-#endif
- /* Include other methods here. */
-
- return -ENODEV;
+ cleanup_one_si(dev_get_drvdata(&dev->dev));
+ return 0;
}
-
-static int try_get_dev_id(struct smi_info *smi_info)
+static struct of_device_id ipmi_match[] =
{
- unsigned char msg[2];
- unsigned char *resp;
- unsigned long resp_len;
- enum si_sm_result smi_result;
- int rv = 0;
+ { .type = "ipmi", .compatible = "ipmi-kcs",
+ .data = (void *)(unsigned long) SI_KCS },
+ { .type = "ipmi", .compatible = "ipmi-smic",
+ .data = (void *)(unsigned long) SI_SMIC },
+ { .type = "ipmi", .compatible = "ipmi-bt",
+ .data = (void *)(unsigned long) SI_BT },
+ {},
+};
- resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
- if (! resp)
- return -ENOMEM;
+static struct of_platform_driver ipmi_of_platform_driver = {
+ .name = "ipmi",
+ .match_table = ipmi_match,
+ .probe = ipmi_of_probe,
+ .remove = __devexit_p(ipmi_of_remove),
+};
+#endif /* CONFIG_PPC_OF */
- /* Do a Get Device ID command, since it comes back with some
- useful info. */
- msg[0] = IPMI_NETFN_APP_REQUEST << 2;
- msg[1] = IPMI_GET_DEVICE_ID_CMD;
- smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+static int wait_for_msg_done(struct smi_info *smi_info)
+{
+ enum si_sm_result smi_result;
smi_result = smi_info->handlers->event(smi_info->si_sm, 0);
- for (;;)
- {
+ for (;;) {
if (smi_result == SI_SM_CALL_WITH_DELAY ||
smi_result == SI_SM_CALL_WITH_TICK_DELAY) {
schedule_timeout_uninterruptible(1);
smi_result = smi_info->handlers->event(
smi_info->si_sm, 100);
- }
- else if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
- {
+ } else if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
smi_result = smi_info->handlers->event(
smi_info->si_sm, 0);
- }
- else
+ } else
break;
}
- if (smi_result == SI_SM_HOSED) {
- /* We couldn't get the state machine to run, so whatever's at
- the port is probably not an IPMI SMI interface. */
- rv = -ENODEV;
+ if (smi_result == SI_SM_HOSED)
+ /*
+ * We couldn't get the state machine to run, so whatever's at
+ * the port is probably not an IPMI SMI interface.
+ */
+ return -ENODEV;
+
+ return 0;
+}
+
+static int try_get_dev_id(struct smi_info *smi_info)
+{
+ unsigned char msg[2];
+ unsigned char *resp;
+ unsigned long resp_len;
+ int rv = 0;
+
+ resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
+ if (!resp)
+ return -ENOMEM;
+
+ /*
+ * Do a Get Device ID command, since it comes back with some
+ * useful info.
+ */
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_GET_DEVICE_ID_CMD;
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+
+ rv = wait_for_msg_done(smi_info);
+ if (rv)
+ goto out;
+
+ resp_len = smi_info->handlers->get_result(smi_info->si_sm,
+ resp, IPMI_MAX_MSG_LENGTH);
+
+ /* Check and record info from the get device id, in case we need it. */
+ rv = ipmi_demangle_device_id(resp, resp_len, &smi_info->device_id);
+
+ out:
+ kfree(resp);
+ return rv;
+}
+
+static int try_enable_event_buffer(struct smi_info *smi_info)
+{
+ unsigned char msg[3];
+ unsigned char *resp;
+ unsigned long resp_len;
+ int rv = 0;
+
+ resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
+ if (!resp)
+ return -ENOMEM;
+
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+
+ rv = wait_for_msg_done(smi_info);
+ if (rv) {
+ printk(KERN_WARNING
+ "ipmi_si: Error getting response from get global,"
+ " enables command, the event buffer is not"
+ " enabled.\n");
goto out;
}
- /* Otherwise, we got some data. */
resp_len = smi_info->handlers->get_result(smi_info->si_sm,
resp, IPMI_MAX_MSG_LENGTH);
- if (resp_len < 6) {
- /* That's odd, it should be longer. */
+
+ if (resp_len < 4 ||
+ resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
+ resp[1] != IPMI_GET_BMC_GLOBAL_ENABLES_CMD ||
+ resp[2] != 0) {
+ printk(KERN_WARNING
+ "ipmi_si: Invalid return from get global"
+ " enables command, cannot enable the event"
+ " buffer.\n");
rv = -EINVAL;
goto out;
}
- if ((resp[1] != IPMI_GET_DEVICE_ID_CMD) || (resp[2] != 0)) {
- /* That's odd, it shouldn't be able to fail. */
- rv = -EINVAL;
+ if (resp[3] & IPMI_BMC_EVT_MSG_BUFF)
+ /* buffer is already enabled, nothing to do. */
+ goto out;
+
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
+ msg[2] = resp[3] | IPMI_BMC_EVT_MSG_BUFF;
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
+
+ rv = wait_for_msg_done(smi_info);
+ if (rv) {
+ printk(KERN_WARNING
+ "ipmi_si: Error getting response from set global,"
+ " enables command, the event buffer is not"
+ " enabled.\n");
goto out;
}
- /* Record info from the get device id, in case we need it. */
- memcpy(&smi_info->device_id, &resp[3],
- min_t(unsigned long, resp_len-3, sizeof(smi_info->device_id)));
+ resp_len = smi_info->handlers->get_result(smi_info->si_sm,
+ resp, IPMI_MAX_MSG_LENGTH);
+
+ if (resp_len < 3 ||
+ resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
+ resp[1] != IPMI_SET_BMC_GLOBAL_ENABLES_CMD) {
+ printk(KERN_WARNING
+ "ipmi_si: Invalid return from get global,"
+ "enables command, not enable the event"
+ " buffer.\n");
+ rv = -EINVAL;
+ goto out;
+ }
+ if (resp[2] != 0)
+ /*
+ * An error when setting the event buffer bit means
+ * that the event buffer is not supported.
+ */
+ rv = -ENOENT;
out:
kfree(resp);
return rv;
static int type_file_read_proc(char *page, char **start, off_t off,
int count, int *eof, void *data)
{
- char *out = (char *) page;
struct smi_info *smi = data;
- switch (smi->si_type) {
- case SI_KCS:
- return sprintf(out, "kcs\n");
- case SI_SMIC:
- return sprintf(out, "smic\n");
- case SI_BT:
- return sprintf(out, "bt\n");
- default:
- return 0;
- }
+ return sprintf(page, "%s\n", si_to_str[smi->si_type]);
}
static int stat_file_read_proc(char *page, char **start, off_t off,
struct smi_info *smi = data;
out += sprintf(out, "interrupts_enabled: %d\n",
- smi->irq && ! smi->interrupt_disabled);
- out += sprintf(out, "short_timeouts: %ld\n",
- smi->short_timeouts);
- out += sprintf(out, "long_timeouts: %ld\n",
- smi->long_timeouts);
- out += sprintf(out, "timeout_restarts: %ld\n",
- smi->timeout_restarts);
- out += sprintf(out, "idles: %ld\n",
- smi->idles);
- out += sprintf(out, "interrupts: %ld\n",
- smi->interrupts);
- out += sprintf(out, "attentions: %ld\n",
- smi->attentions);
- out += sprintf(out, "flag_fetches: %ld\n",
- smi->flag_fetches);
- out += sprintf(out, "hosed_count: %ld\n",
- smi->hosed_count);
- out += sprintf(out, "complete_transactions: %ld\n",
- smi->complete_transactions);
- out += sprintf(out, "events: %ld\n",
- smi->events);
- out += sprintf(out, "watchdog_pretimeouts: %ld\n",
- smi->watchdog_pretimeouts);
- out += sprintf(out, "incoming_messages: %ld\n",
- smi->incoming_messages);
-
- return (out - ((char *) page));
+ smi->irq && !smi->interrupt_disabled);
+ out += sprintf(out, "short_timeouts: %u\n",
+ smi_get_stat(smi, short_timeouts));
+ out += sprintf(out, "long_timeouts: %u\n",
+ smi_get_stat(smi, long_timeouts));
+ out += sprintf(out, "idles: %u\n",
+ smi_get_stat(smi, idles));
+ out += sprintf(out, "interrupts: %u\n",
+ smi_get_stat(smi, interrupts));
+ out += sprintf(out, "attentions: %u\n",
+ smi_get_stat(smi, attentions));
+ out += sprintf(out, "flag_fetches: %u\n",
+ smi_get_stat(smi, flag_fetches));
+ out += sprintf(out, "hosed_count: %u\n",
+ smi_get_stat(smi, hosed_count));
+ out += sprintf(out, "complete_transactions: %u\n",
+ smi_get_stat(smi, complete_transactions));
+ out += sprintf(out, "events: %u\n",
+ smi_get_stat(smi, events));
+ out += sprintf(out, "watchdog_pretimeouts: %u\n",
+ smi_get_stat(smi, watchdog_pretimeouts));
+ out += sprintf(out, "incoming_messages: %u\n",
+ smi_get_stat(smi, incoming_messages));
+
+ return out - page;
+}
+
+static int param_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ struct smi_info *smi = data;
+
+ return sprintf(page,
+ "%s,%s,0x%lx,rsp=%d,rsi=%d,rsh=%d,irq=%d,ipmb=%d\n",
+ si_to_str[smi->si_type],
+ addr_space_to_str[smi->io.addr_type],
+ smi->io.addr_data,
+ smi->io.regspacing,
+ smi->io.regsize,
+ smi->io.regshift,
+ smi->irq,
+ smi->slave_addr);
}
/*
static int oem_data_avail_to_receive_msg_avail(struct smi_info *smi_info)
{
smi_info->msg_flags = ((smi_info->msg_flags & ~OEM_DATA_AVAIL) |
- RECEIVE_MSG_AVAIL);
+ RECEIVE_MSG_AVAIL);
return 1;
}
#define DELL_POWEREDGE_8G_BMC_DEVICE_ID 0x20
#define DELL_POWEREDGE_8G_BMC_DEVICE_REV 0x80
#define DELL_POWEREDGE_8G_BMC_IPMI_VERSION 0x51
-#define DELL_IANA_MFR_ID {0xA2, 0x02, 0x00}
+#define DELL_IANA_MFR_ID 0x0002a2
static void setup_dell_poweredge_oem_data_handler(struct smi_info *smi_info)
{
struct ipmi_device_id *id = &smi_info->device_id;
- const char mfr[3]=DELL_IANA_MFR_ID;
- if (! memcmp(mfr, id->manufacturer_id, sizeof(mfr))) {
+ if (id->manufacturer_id == DELL_IANA_MFR_ID) {
if (id->device_id == DELL_POWEREDGE_8G_BMC_DEVICE_ID &&
id->device_revision == DELL_POWEREDGE_8G_BMC_DEVICE_REV &&
- id->ipmi_version == DELL_POWEREDGE_8G_BMC_IPMI_VERSION) {
+ id->ipmi_version == DELL_POWEREDGE_8G_BMC_IPMI_VERSION) {
smi_info->oem_data_avail_handler =
oem_data_avail_to_receive_msg_avail;
- }
- else if (ipmi_version_major(id) < 1 ||
- (ipmi_version_major(id) == 1 &&
- ipmi_version_minor(id) < 5)) {
+ } else if (ipmi_version_major(id) < 1 ||
+ (ipmi_version_major(id) == 1 &&
+ ipmi_version_minor(id) < 5)) {
smi_info->oem_data_avail_handler =
oem_data_avail_to_receive_msg_avail;
}
setup_dell_poweredge_bt_xaction_handler(struct smi_info *smi_info)
{
struct ipmi_device_id *id = &smi_info->device_id;
- const char mfr[3]=DELL_IANA_MFR_ID;
- if (! memcmp(mfr, id->manufacturer_id, sizeof(mfr)) &&
+ if (id->manufacturer_id == DELL_IANA_MFR_ID &&
smi_info->si_type == SI_BT)
register_xaction_notifier(&dell_poweredge_bt_xaction_notifier);
}
static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
{
- if (smi_info->thread != NULL && smi_info->thread != ERR_PTR(-ENOMEM))
- kthread_stop(smi_info->thread);
- del_timer_sync(&smi_info->si_timer);
+ if (smi_info->intf) {
+ /*
+ * The timer and thread are only running if the
+ * interface has been started up and registered.
+ */
+ if (smi_info->thread != NULL)
+ kthread_stop(smi_info->thread);
+ del_timer_sync(&smi_info->si_timer);
+ }
}
-/* Returns 0 if initialized, or negative on an error. */
-static int init_one_smi(int intf_num, struct smi_info **smi)
+static __devinitdata struct ipmi_default_vals
{
- int rv;
- struct smi_info *new_smi;
+ int type;
+ int port;
+} ipmi_defaults[] =
+{
+ { .type = SI_KCS, .port = 0xca2 },
+ { .type = SI_SMIC, .port = 0xca9 },
+ { .type = SI_BT, .port = 0xe4 },
+ { .port = 0 }
+};
+static __devinit void default_find_bmc(void)
+{
+ struct smi_info *info;
+ int i;
- rv = try_init_mem(intf_num, &new_smi);
- if (rv)
- rv = try_init_port(intf_num, &new_smi);
-#ifdef CONFIG_ACPI
- if (rv && si_trydefaults)
- rv = try_init_acpi(intf_num, &new_smi);
-#endif
-#ifdef CONFIG_DMI
- if (rv && si_trydefaults)
- rv = try_init_smbios(intf_num, &new_smi);
+ for (i = 0; ; i++) {
+ if (!ipmi_defaults[i].port)
+ break;
+#ifdef CONFIG_PPC
+ if (check_legacy_ioport(ipmi_defaults[i].port))
+ continue;
#endif
- if (rv && si_trydefaults)
- rv = try_init_plug_and_play(intf_num, &new_smi);
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return;
- if (rv)
- return rv;
+ info->addr_source = NULL;
- /* So we know not to free it unless we have allocated one. */
- new_smi->intf = NULL;
- new_smi->si_sm = NULL;
- new_smi->handlers = NULL;
+ info->si_type = ipmi_defaults[i].type;
+ info->io_setup = port_setup;
+ info->io.addr_data = ipmi_defaults[i].port;
+ info->io.addr_type = IPMI_IO_ADDR_SPACE;
+
+ info->io.addr = NULL;
+ info->io.regspacing = DEFAULT_REGSPACING;
+ info->io.regsize = DEFAULT_REGSPACING;
+ info->io.regshift = 0;
+
+ if (try_smi_init(info) == 0) {
+ /* Found one... */
+ printk(KERN_INFO "ipmi_si: Found default %s state"
+ " machine at %s address 0x%lx\n",
+ si_to_str[info->si_type],
+ addr_space_to_str[info->io.addr_type],
+ info->io.addr_data);
+ return;
+ }
+ }
+}
+
+static int is_new_interface(struct smi_info *info)
+{
+ struct smi_info *e;
- if (! new_smi->irq_setup) {
- new_smi->irq = irqs[intf_num];
- new_smi->irq_setup = std_irq_setup;
- new_smi->irq_cleanup = std_irq_cleanup;
+ list_for_each_entry(e, &smi_infos, link) {
+ if (e->io.addr_type != info->io.addr_type)
+ continue;
+ if (e->io.addr_data == info->io.addr_data)
+ return 0;
}
- /* Default to KCS if no type is specified. */
- if (si_type[intf_num] == NULL) {
- if (si_trydefaults)
- si_type[intf_num] = "kcs";
- else {
- rv = -EINVAL;
- goto out_err;
- }
+ return 1;
+}
+
+static int try_smi_init(struct smi_info *new_smi)
+{
+ int rv;
+ int i;
+
+ if (new_smi->addr_source) {
+ printk(KERN_INFO "ipmi_si: Trying %s-specified %s state"
+ " machine at %s address 0x%lx, slave address 0x%x,"
+ " irq %d\n",
+ new_smi->addr_source,
+ si_to_str[new_smi->si_type],
+ addr_space_to_str[new_smi->io.addr_type],
+ new_smi->io.addr_data,
+ new_smi->slave_addr, new_smi->irq);
+ }
+
+ mutex_lock(&smi_infos_lock);
+ if (!is_new_interface(new_smi)) {
+ printk(KERN_WARNING "ipmi_si: duplicate interface\n");
+ rv = -EBUSY;
+ goto out_err;
}
- /* Set up the state machine to use. */
- if (strcmp(si_type[intf_num], "kcs") == 0) {
+ /* So we know not to free it unless we have allocated one. */
+ new_smi->intf = NULL;
+ new_smi->si_sm = NULL;
+ new_smi->handlers = NULL;
+
+ switch (new_smi->si_type) {
+ case SI_KCS:
new_smi->handlers = &kcs_smi_handlers;
- new_smi->si_type = SI_KCS;
- } else if (strcmp(si_type[intf_num], "smic") == 0) {
+ break;
+
+ case SI_SMIC:
new_smi->handlers = &smic_smi_handlers;
- new_smi->si_type = SI_SMIC;
- } else if (strcmp(si_type[intf_num], "bt") == 0) {
+ break;
+
+ case SI_BT:
new_smi->handlers = &bt_smi_handlers;
- new_smi->si_type = SI_BT;
- } else {
+ break;
+
+ default:
/* No support for anything else yet. */
rv = -EIO;
goto out_err;
/* Allocate the state machine's data and initialize it. */
new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL);
- if (! new_smi->si_sm) {
- printk(" Could not allocate state machine memory\n");
+ if (!new_smi->si_sm) {
+ printk(KERN_ERR "Could not allocate state machine memory\n");
rv = -ENOMEM;
goto out_err;
}
/* Now that we know the I/O size, we can set up the I/O. */
rv = new_smi->io_setup(new_smi);
if (rv) {
- printk(" Could not set up I/O space\n");
+ printk(KERN_ERR "Could not set up I/O space\n");
goto out_err;
}
spin_lock_init(&(new_smi->si_lock));
spin_lock_init(&(new_smi->msg_lock));
- spin_lock_init(&(new_smi->count_lock));
/* Do low-level detection first. */
if (new_smi->handlers->detect(new_smi->si_sm)) {
+ if (new_smi->addr_source)
+ printk(KERN_INFO "ipmi_si: Interface detection"
+ " failed\n");
rv = -ENODEV;
goto out_err;
}
- /* Attempt a get device id command. If it fails, we probably
- don't have a SMI here. */
+ /*
+ * Attempt a get device id command. If it fails, we probably
+ * don't have a BMC here.
+ */
rv = try_get_dev_id(new_smi);
- if (rv)
+ if (rv) {
+ if (new_smi->addr_source)
+ printk(KERN_INFO "ipmi_si: There appears to be no BMC"
+ " at this location\n");
goto out_err;
+ }
setup_oem_data_handler(new_smi);
setup_xaction_handlers(new_smi);
- /* Try to claim any interrupts. */
- new_smi->irq_setup(new_smi);
-
INIT_LIST_HEAD(&(new_smi->xmit_msgs));
INIT_LIST_HEAD(&(new_smi->hp_xmit_msgs));
new_smi->curr_msg = NULL;
atomic_set(&new_smi->req_events, 0);
new_smi->run_to_completion = 0;
+ for (i = 0; i < SI_NUM_STATS; i++)
+ atomic_set(&new_smi->stats[i], 0);
new_smi->interrupt_disabled = 0;
atomic_set(&new_smi->stop_operation, 0);
- new_smi->intf_num = intf_num;
+ new_smi->intf_num = smi_num;
+ smi_num++;
+
+ rv = try_enable_event_buffer(new_smi);
+ if (rv == 0)
+ new_smi->has_event_buffer = 1;
- /* Start clearing the flags before we enable interrupts or the
- timer to avoid racing with the timer. */
+ /*
+ * Start clearing the flags before we enable interrupts or the
+ * timer to avoid racing with the timer.
+ */
start_clear_flags(new_smi);
/* IRQ is defined to be set when non-zero. */
if (new_smi->irq)
new_smi->si_state = SI_CLEARING_FLAGS_THEN_SET_IRQ;
- /* The ipmi_register_smi() code does some operations to
- determine the channel information, so we must be ready to
- handle operations before it is called. This means we have
- to stop the timer if we get an error after this point. */
- init_timer(&(new_smi->si_timer));
- new_smi->si_timer.data = (long) new_smi;
- new_smi->si_timer.function = smi_timeout;
- new_smi->last_timeout_jiffies = jiffies;
- new_smi->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
+ if (!new_smi->dev) {
+ /*
+ * If we don't already have a device from something
+ * else (like PCI), then register a new one.
+ */
+ new_smi->pdev = platform_device_alloc("ipmi_si",
+ new_smi->intf_num);
+ if (!new_smi->pdev) {
+ printk(KERN_ERR
+ "ipmi_si_intf:"
+ " Unable to allocate platform device\n");
+ goto out_err;
+ }
+ new_smi->dev = &new_smi->pdev->dev;
+ new_smi->dev->driver = &ipmi_driver.driver;
- add_timer(&(new_smi->si_timer));
- if (new_smi->si_type != SI_BT)
- new_smi->thread = kthread_run(ipmi_thread, new_smi,
- "kipmi%d", new_smi->intf_num);
+ rv = platform_device_add(new_smi->pdev);
+ if (rv) {
+ printk(KERN_ERR
+ "ipmi_si_intf:"
+ " Unable to register system interface device:"
+ " %d\n",
+ rv);
+ goto out_err;
+ }
+ new_smi->dev_registered = 1;
+ }
rv = ipmi_register_smi(&handlers,
new_smi,
- ipmi_version_major(&new_smi->device_id),
- ipmi_version_minor(&new_smi->device_id),
- new_smi->slave_addr,
- &(new_smi->intf));
+ &new_smi->device_id,
+ new_smi->dev,
+ "bmc",
+ new_smi->slave_addr);
if (rv) {
printk(KERN_ERR
"ipmi_si: Unable to register device: error %d\n",
}
rv = ipmi_smi_add_proc_entry(new_smi->intf, "type",
- type_file_read_proc, NULL,
- new_smi, THIS_MODULE);
+ type_file_read_proc,
+ new_smi);
if (rv) {
printk(KERN_ERR
"ipmi_si: Unable to create proc entry: %d\n",
}
rv = ipmi_smi_add_proc_entry(new_smi->intf, "si_stats",
- stat_file_read_proc, NULL,
- new_smi, THIS_MODULE);
+ stat_file_read_proc,
+ new_smi);
+ if (rv) {
+ printk(KERN_ERR
+ "ipmi_si: Unable to create proc entry: %d\n",
+ rv);
+ goto out_err_stop_timer;
+ }
+
+ rv = ipmi_smi_add_proc_entry(new_smi->intf, "params",
+ param_read_proc,
+ new_smi);
if (rv) {
printk(KERN_ERR
"ipmi_si: Unable to create proc entry: %d\n",
goto out_err_stop_timer;
}
- *smi = new_smi;
+ list_add_tail(&new_smi->link, &smi_infos);
+
+ mutex_unlock(&smi_infos_lock);
- printk(" IPMI %s interface initialized\n", si_type[intf_num]);
+ printk(KERN_INFO "IPMI %s interface initialized\n",
+ si_to_str[new_smi->si_type]);
return 0;
if (new_smi->intf)
ipmi_unregister_smi(new_smi->intf);
- new_smi->irq_cleanup(new_smi);
+ if (new_smi->irq_cleanup)
+ new_smi->irq_cleanup(new_smi);
- /* Wait until we know that we are out of any interrupt
- handlers might have been running before we freed the
- interrupt. */
+ /*
+ * Wait until we know that we are out of any interrupt
+ * handlers might have been running before we freed the
+ * interrupt.
+ */
synchronize_sched();
if (new_smi->si_sm) {
new_smi->handlers->cleanup(new_smi->si_sm);
kfree(new_smi->si_sm);
}
+ if (new_smi->addr_source_cleanup)
+ new_smi->addr_source_cleanup(new_smi);
if (new_smi->io_cleanup)
new_smi->io_cleanup(new_smi);
+ if (new_smi->dev_registered)
+ platform_device_unregister(new_smi->pdev);
+
+ kfree(new_smi);
+
+ mutex_unlock(&smi_infos_lock);
+
return rv;
}
-static __init int init_ipmi_si(void)
+static __devinit int init_ipmi_si(void)
{
- int rv = 0;
- int pos = 0;
int i;
char *str;
+ int rv;
if (initialized)
return 0;
initialized = 1;
+ /* Register the device drivers. */
+ rv = driver_register(&ipmi_driver.driver);
+ if (rv) {
+ printk(KERN_ERR
+ "init_ipmi_si: Unable to register driver: %d\n",
+ rv);
+ return rv;
+ }
+
+
/* Parse out the si_type string into its components. */
str = si_type_str;
if (*str != '\0') {
printk(KERN_INFO "IPMI System Interface driver.\n");
+ hardcode_find_bmc();
+
#ifdef CONFIG_DMI
dmi_find_bmc();
#endif
- rv = init_one_smi(0, &(smi_infos[pos]));
- if (rv && ! ports[0] && si_trydefaults) {
- /* If we are trying defaults and the initial port is
- not set, then set it. */
- si_type[0] = "kcs";
- ports[0] = DEFAULT_KCS_IO_PORT;
- rv = init_one_smi(0, &(smi_infos[pos]));
- if (rv) {
- /* No KCS - try SMIC */
- si_type[0] = "smic";
- ports[0] = DEFAULT_SMIC_IO_PORT;
- rv = init_one_smi(0, &(smi_infos[pos]));
- }
- if (rv) {
- /* No SMIC - try BT */
- si_type[0] = "bt";
- ports[0] = DEFAULT_BT_IO_PORT;
- rv = init_one_smi(0, &(smi_infos[pos]));
+#ifdef CONFIG_ACPI
+ spmi_find_bmc();
+#endif
+#ifdef CONFIG_ACPI
+ pnp_register_driver(&ipmi_pnp_driver);
+#endif
+
+#ifdef CONFIG_PCI
+ rv = pci_register_driver(&ipmi_pci_driver);
+ if (rv)
+ printk(KERN_ERR
+ "init_ipmi_si: Unable to register PCI driver: %d\n",
+ rv);
+#endif
+
+#ifdef CONFIG_PPC_OF
+ of_register_platform_driver(&ipmi_of_platform_driver);
+#endif
+
+ if (si_trydefaults) {
+ mutex_lock(&smi_infos_lock);
+ if (list_empty(&smi_infos)) {
+ /* No BMC was found, try defaults. */
+ mutex_unlock(&smi_infos_lock);
+ default_find_bmc();
+ } else {
+ mutex_unlock(&smi_infos_lock);
}
}
- if (rv == 0)
- pos++;
- for (i = 1; i < SI_MAX_PARMS; i++) {
- rv = init_one_smi(i, &(smi_infos[pos]));
- if (rv == 0)
- pos++;
- }
+ mutex_lock(&smi_infos_lock);
+ if (unload_when_empty && list_empty(&smi_infos)) {
+ mutex_unlock(&smi_infos_lock);
+#ifdef CONFIG_PCI
+ pci_unregister_driver(&ipmi_pci_driver);
+#endif
- if (smi_infos[0] == NULL) {
- printk("ipmi_si: Unable to find any System Interface(s)\n");
+#ifdef CONFIG_PPC_OF
+ of_unregister_platform_driver(&ipmi_of_platform_driver);
+#endif
+ driver_unregister(&ipmi_driver.driver);
+ printk(KERN_WARNING
+ "ipmi_si: Unable to find any System Interface(s)\n");
return -ENODEV;
+ } else {
+ mutex_unlock(&smi_infos_lock);
+ return 0;
}
-
- return 0;
}
module_init(init_ipmi_si);
-static void __exit cleanup_one_si(struct smi_info *to_clean)
+static void cleanup_one_si(struct smi_info *to_clean)
{
int rv;
unsigned long flags;
- if (! to_clean)
+ if (!to_clean)
return;
- /* Tell the timer and interrupt handlers that we are shutting
- down. */
- spin_lock_irqsave(&(to_clean->si_lock), flags);
- spin_lock(&(to_clean->msg_lock));
+ list_del(&to_clean->link);
+ /* Tell the driver that we are shutting down. */
atomic_inc(&to_clean->stop_operation);
- to_clean->irq_cleanup(to_clean);
-
- spin_unlock(&(to_clean->msg_lock));
- spin_unlock_irqrestore(&(to_clean->si_lock), flags);
-
- /* Wait until we know that we are out of any interrupt
- handlers might have been running before we freed the
- interrupt. */
- synchronize_sched();
+ /*
+ * Make sure the timer and thread are stopped and will not run
+ * again.
+ */
wait_for_timer_and_thread(to_clean);
- /* Interrupts and timeouts are stopped, now make sure the
- interface is in a clean state. */
+ /*
+ * Timeouts are stopped, now make sure the interrupts are off
+ * for the device. A little tricky with locks to make sure
+ * there are no races.
+ */
+ spin_lock_irqsave(&to_clean->si_lock, flags);
+ while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
+ spin_unlock_irqrestore(&to_clean->si_lock, flags);
+ poll(to_clean);
+ schedule_timeout_uninterruptible(1);
+ spin_lock_irqsave(&to_clean->si_lock, flags);
+ }
+ disable_si_irq(to_clean);
+ spin_unlock_irqrestore(&to_clean->si_lock, flags);
+ while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
+ poll(to_clean);
+ schedule_timeout_uninterruptible(1);
+ }
+
+ /* Clean up interrupts and make sure that everything is done. */
+ if (to_clean->irq_cleanup)
+ to_clean->irq_cleanup(to_clean);
while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
poll(to_clean);
schedule_timeout_uninterruptible(1);
kfree(to_clean->si_sm);
+ if (to_clean->addr_source_cleanup)
+ to_clean->addr_source_cleanup(to_clean);
if (to_clean->io_cleanup)
to_clean->io_cleanup(to_clean);
+
+ if (to_clean->dev_registered)
+ platform_device_unregister(to_clean->pdev);
+
+ kfree(to_clean);
}
static __exit void cleanup_ipmi_si(void)
{
- int i;
+ struct smi_info *e, *tmp_e;
- if (! initialized)
+ if (!initialized)
return;
- for (i = 0; i < SI_MAX_DRIVERS; i++) {
- cleanup_one_si(smi_infos[i]);
- }
+#ifdef CONFIG_PCI
+ pci_unregister_driver(&ipmi_pci_driver);
+#endif
+#ifdef CONFIG_ACPI
+ pnp_unregister_driver(&ipmi_pnp_driver);
+#endif
+
+#ifdef CONFIG_PPC_OF
+ of_unregister_platform_driver(&ipmi_of_platform_driver);
+#endif
+
+ mutex_lock(&smi_infos_lock);
+ list_for_each_entry_safe(e, tmp_e, &smi_infos, link)
+ cleanup_one_si(e);
+ mutex_unlock(&smi_infos_lock);
+
+ driver_unregister(&ipmi_driver.driver);
}
module_exit(cleanup_ipmi_si);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
-MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT system interfaces.");
+MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT"
+ " system interfaces.");
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff