#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/mm.h>
+#include <linux/seq_file.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/bitops.h>
*/
static void rs_stop(struct tty_struct *tty)
{
- struct async_struct *info = (struct async_struct *)tty->driver_data;
+ struct async_struct *info = tty->driver_data;
unsigned long flags;
if (serial_paranoia_check(info, tty->name, "rs_stop"))
static void rs_start(struct tty_struct *tty)
{
- struct async_struct *info = (struct async_struct *)tty->driver_data;
+ struct async_struct *info = tty->driver_data;
unsigned long flags;
if (serial_paranoia_check(info, tty->name, "rs_start"))
}
/* If the quotient is zero refuse the change */
if (!quot && old_termios) {
+ /* FIXME: Will need updating for new tty in the end */
info->tty->termios->c_cflag &= ~CBAUD;
info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD);
baud = tty_get_baud_rate(info->tty);
info->IER |= UART_IER_MSI;
}
/* TBD:
- * Does clearing IER_MSI imply that we should disbale the VBL interrupt ?
+ * Does clearing IER_MSI imply that we should disable the VBL interrupt ?
*/
/*
* Set up parity check flag
*/
-#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
info->read_status_mask = UART_LSR_OE | UART_LSR_DR;
if (I_INPCK(info->tty))
local_irq_restore(flags);
}
-static void rs_put_char(struct tty_struct *tty, unsigned char ch)
+static int rs_put_char(struct tty_struct *tty, unsigned char ch)
{
struct async_struct *info;
unsigned long flags;
- if (!tty)
- return;
-
info = tty->driver_data;
if (serial_paranoia_check(info, tty->name, "rs_put_char"))
- return;
+ return 0;
if (!info->xmit.buf)
- return;
+ return 0;
local_irq_save(flags);
if (CIRC_SPACE(info->xmit.head,
info->xmit.tail,
SERIAL_XMIT_SIZE) == 0) {
local_irq_restore(flags);
- return;
+ return 0;
}
info->xmit.buf[info->xmit.head++] = ch;
info->xmit.head &= SERIAL_XMIT_SIZE-1;
local_irq_restore(flags);
+ return 1;
}
static void rs_flush_chars(struct tty_struct *tty)
{
- struct async_struct *info = (struct async_struct *)tty->driver_data;
+ struct async_struct *info = tty->driver_data;
unsigned long flags;
if (serial_paranoia_check(info, tty->name, "rs_flush_chars"))
struct async_struct *info;
unsigned long flags;
- if (!tty)
- return 0;
-
info = tty->driver_data;
if (serial_paranoia_check(info, tty->name, "rs_write"))
static int rs_write_room(struct tty_struct *tty)
{
- struct async_struct *info = (struct async_struct *)tty->driver_data;
+ struct async_struct *info = tty->driver_data;
if (serial_paranoia_check(info, tty->name, "rs_write_room"))
return 0;
static int rs_chars_in_buffer(struct tty_struct *tty)
{
- struct async_struct *info = (struct async_struct *)tty->driver_data;
+ struct async_struct *info = tty->driver_data;
if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
return 0;
static void rs_flush_buffer(struct tty_struct *tty)
{
- struct async_struct *info = (struct async_struct *)tty->driver_data;
+ struct async_struct *info = tty->driver_data;
unsigned long flags;
if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
*/
static void rs_send_xchar(struct tty_struct *tty, char ch)
{
- struct async_struct *info = (struct async_struct *)tty->driver_data;
+ struct async_struct *info = tty->driver_data;
unsigned long flags;
if (serial_paranoia_check(info, tty->name, "rs_send_char"))
*/
static void rs_throttle(struct tty_struct * tty)
{
- struct async_struct *info = (struct async_struct *)tty->driver_data;
+ struct async_struct *info = tty->driver_data;
unsigned long flags;
#ifdef SERIAL_DEBUG_THROTTLE
char buf[64];
static void rs_unthrottle(struct tty_struct * tty)
{
- struct async_struct *info = (struct async_struct *)tty->driver_data;
+ struct async_struct *info = tty->driver_data;
unsigned long flags;
#ifdef SERIAL_DEBUG_THROTTLE
char buf[64];
if (!retinfo)
return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
+ lock_kernel();
tmp.type = state->type;
tmp.line = state->line;
tmp.port = state->port;
tmp.close_delay = state->close_delay;
tmp.closing_wait = state->closing_wait;
tmp.custom_divisor = state->custom_divisor;
+ unlock_kernel();
if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
return -EFAULT;
return 0;
if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
return -EFAULT;
+
+ lock_kernel();
state = info->state;
old_state = *state;
change_irq = new_serial.irq != state->irq;
change_port = (new_serial.port != state->port);
- if(change_irq || change_port || (new_serial.xmit_fifo_size != state->xmit_fifo_size))
+ if(change_irq || change_port || (new_serial.xmit_fifo_size != state->xmit_fifo_size)) {
+ unlock_kernel();
return -EINVAL;
+ }
if (!serial_isroot()) {
if ((new_serial.baud_base != state->baud_base) ||
goto check_and_exit;
}
- if (new_serial.baud_base < 9600)
+ if (new_serial.baud_base < 9600) {
+ unlock_kernel();
return -EINVAL;
+ }
/*
* OK, past this point, all the error checking has been done.
}
} else
retval = startup(info);
+ unlock_kernel();
return retval;
}
static int rs_tiocmget(struct tty_struct *tty, struct file *file)
{
- struct async_struct * info = (struct async_struct *)tty->driver_data;
+ struct async_struct * info = tty->driver_data;
unsigned char control, status;
unsigned long flags;
static int rs_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
- struct async_struct * info = (struct async_struct *)tty->driver_data;
+ struct async_struct * info = tty->driver_data;
unsigned long flags;
if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
/*
* rs_break() --- routine which turns the break handling on or off
*/
-static void rs_break(struct tty_struct *tty, int break_state)
+static int rs_break(struct tty_struct *tty, int break_state)
{
- struct async_struct * info = (struct async_struct *)tty->driver_data;
+ struct async_struct * info = tty->driver_data;
unsigned long flags;
if (serial_paranoia_check(info, tty->name, "rs_break"))
- return;
+ return -EINVAL;
local_irq_save(flags);
if (break_state == -1)
custom.adkcon = AC_UARTBRK;
mb();
local_irq_restore(flags);
+ return 0;
}
static int rs_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
- struct async_struct * info = (struct async_struct *)tty->driver_data;
+ struct async_struct * info = tty->driver_data;
struct async_icount cprev, cnow; /* kernel counter temps */
struct serial_icounter_struct icount;
void __user *argp = (void __user *)arg;
static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
- struct async_struct *info = (struct async_struct *)tty->driver_data;
+ struct async_struct *info = tty->driver_data;
unsigned long flags;
unsigned int cflag = tty->termios->c_cflag;
- if ( (cflag == old_termios->c_cflag)
- && ( RELEVANT_IFLAG(tty->termios->c_iflag)
- == RELEVANT_IFLAG(old_termios->c_iflag)))
- return;
-
change_speed(info, old_termios);
/* Handle transition to B0 status */
*/
static void rs_close(struct tty_struct *tty, struct file * filp)
{
- struct async_struct * info = (struct async_struct *)tty->driver_data;
+ struct async_struct * info = tty->driver_data;
struct serial_state *state;
unsigned long flags;
rs_wait_until_sent(tty, info->timeout);
}
shutdown(info);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ rs_flush_buffer(tty);
tty_ldisc_flush(tty);
tty->closing = 0;
*/
static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
{
- struct async_struct * info = (struct async_struct *)tty->driver_data;
+ struct async_struct * info = tty->driver_data;
unsigned long orig_jiffies, char_time;
int lsr;
return; /* Just in case.... */
orig_jiffies = jiffies;
+
+ lock_kernel();
/*
* Set the check interval to be 1/5 of the estimated time to
* send a single character, and make it at least 1. The check
if (timeout && time_after(jiffies, orig_jiffies + timeout))
break;
}
- current->state = TASK_RUNNING;
+ __set_current_state(TASK_RUNNING);
+ unlock_kernel();
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
#endif
*/
static void rs_hangup(struct tty_struct *tty)
{
- struct async_struct * info = (struct async_struct *)tty->driver_data;
+ struct async_struct * info = tty->driver_data;
struct serial_state *state = info->state;
if (serial_paranoia_check(info, tty->name, "rs_hangup"))
#endif
schedule();
}
- current->state = TASK_RUNNING;
+ __set_current_state(TASK_RUNNING);
remove_wait_queue(&info->open_wait, &wait);
if (extra_count)
state->count++;
*ret_info = sstate->info;
return 0;
}
- info = kmalloc(sizeof(struct async_struct), GFP_KERNEL);
+ info = kzalloc(sizeof(struct async_struct), GFP_KERNEL);
if (!info) {
sstate->count--;
return -ENOMEM;
}
- memset(info, 0, sizeof(struct async_struct));
#ifdef DECLARE_WAITQUEUE
init_waitqueue_head(&info->open_wait);
init_waitqueue_head(&info->close_wait);
* /proc fs routines....
*/
-static inline int line_info(char *buf, struct serial_state *state)
+static inline void line_info(struct seq_file *m, struct serial_state *state)
{
struct async_struct *info = state->info, scr_info;
char stat_buf[30], control, status;
- int ret;
unsigned long flags;
- ret = sprintf(buf, "%d: uart:amiga_builtin",state->line);
+ seq_printf(m, "%d: uart:amiga_builtin",state->line);
/*
* Figure out the current RS-232 lines
strcat(stat_buf, "|CD");
if (info->quot) {
- ret += sprintf(buf+ret, " baud:%d",
- state->baud_base / info->quot);
+ seq_printf(m, " baud:%d", state->baud_base / info->quot);
}
- ret += sprintf(buf+ret, " tx:%d rx:%d",
- state->icount.tx, state->icount.rx);
+ seq_printf(m, " tx:%d rx:%d", state->icount.tx, state->icount.rx);
if (state->icount.frame)
- ret += sprintf(buf+ret, " fe:%d", state->icount.frame);
+ seq_printf(m, " fe:%d", state->icount.frame);
if (state->icount.parity)
- ret += sprintf(buf+ret, " pe:%d", state->icount.parity);
+ seq_printf(m, " pe:%d", state->icount.parity);
if (state->icount.brk)
- ret += sprintf(buf+ret, " brk:%d", state->icount.brk);
+ seq_printf(m, " brk:%d", state->icount.brk);
if (state->icount.overrun)
- ret += sprintf(buf+ret, " oe:%d", state->icount.overrun);
+ seq_printf(m, " oe:%d", state->icount.overrun);
/*
* Last thing is the RS-232 status lines
*/
- ret += sprintf(buf+ret, " %s\n", stat_buf+1);
- return ret;
+ seq_printf(m, " %s\n", stat_buf+1);
}
-static int rs_read_proc(char *page, char **start, off_t off, int count,
- int *eof, void *data)
+static int rs_proc_show(struct seq_file *m, void *v)
{
- int len = 0, l;
- off_t begin = 0;
-
- len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version);
- l = line_info(page + len, &rs_table[0]);
- len += l;
- if (len+begin > off+count)
- goto done;
- if (len+begin < off) {
- begin += len;
- len = 0;
- }
- *eof = 1;
-done:
- if (off >= len+begin)
- return 0;
- *start = page + (off-begin);
- return ((count < begin+len-off) ? count : begin+len-off);
+ seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
+ line_info(m, &rs_table[0]);
+ return 0;
}
+static int rs_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, rs_proc_show, NULL);
+}
+
+static const struct file_operations rs_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = rs_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
/*
* ---------------------------------------------------------------------
* rs_init() and friends
.break_ctl = rs_break,
.send_xchar = rs_send_xchar,
.wait_until_sent = rs_wait_until_sent,
- .read_proc = rs_read_proc,
.tiocmget = rs_tiocmget,
.tiocmset = rs_tiocmset,
+ .proc_fops = &rs_proc_fops,
};
/*
{
unsigned long flags;
struct serial_state * state;
+ int error;
if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_SERIAL))
return -ENODEV;
* We request SERDAT and SERPER only, because the serial registers are
* too spreaded over the custom register space
*/
- if (!request_mem_region(CUSTOM_PHYSADDR+0x30, 4, "amiserial [Paula]"))
- return -EBUSY;
+ if (!request_mem_region(CUSTOM_PHYSADDR+0x30, 4,
+ "amiserial [Paula]")) {
+ error = -EBUSY;
+ goto fail_put_tty_driver;
+ }
IRQ_ports = NULL;
serial_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(serial_driver, &serial_ops);
- if (tty_register_driver(serial_driver))
- panic("Couldn't register serial driver\n");
+ error = tty_register_driver(serial_driver);
+ if (error)
+ goto fail_release_mem_region;
state = rs_table;
state->magic = SSTATE_MAGIC;
local_irq_save(flags);
/* set ISRs, and then disable the rx interrupts */
- request_irq(IRQ_AMIGA_TBE, ser_tx_int, 0, "serial TX", state);
- request_irq(IRQ_AMIGA_RBF, ser_rx_int, IRQF_DISABLED, "serial RX", state);
+ error = request_irq(IRQ_AMIGA_TBE, ser_tx_int, 0, "serial TX", state);
+ if (error)
+ goto fail_unregister;
+
+ error = request_irq(IRQ_AMIGA_RBF, ser_rx_int, IRQF_DISABLED,
+ "serial RX", state);
+ if (error)
+ goto fail_free_irq;
/* turn off Rx and Tx interrupts */
custom.intena = IF_RBF | IF_TBE;
ciab.ddra &= ~(SER_DCD | SER_CTS | SER_DSR); /* inputs */
return 0;
+
+fail_free_irq:
+ free_irq(IRQ_AMIGA_TBE, state);
+fail_unregister:
+ tty_unregister_driver(serial_driver);
+fail_release_mem_region:
+ release_mem_region(CUSTOM_PHYSADDR+0x30, 4);
+fail_put_tty_driver:
+ put_tty_driver(serial_driver);
+ return error;
}
static __exit void rs_exit(void)
kfree(info);
}
+ free_irq(IRQ_AMIGA_TBE, rs_table);
+ free_irq(IRQ_AMIGA_RBF, rs_table);
+
release_mem_region(CUSTOM_PHYSADDR+0x30, 4);
}
module_exit(rs_exit)
+#if defined(CONFIG_SERIAL_CONSOLE) && !defined(MODULE)
+
/*
* ------------------------------------------------------------
* Serial console driver
* ------------------------------------------------------------
*/
-#ifdef CONFIG_SERIAL_CONSOLE
static void amiga_serial_putc(char c)
{
return 0;
}
console_initcall(amiserial_console_init);
-#endif
+
+#endif /* CONFIG_SERIAL_CONSOLE && !MODULE */
MODULE_LICENSE("GPL");
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff