Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge

[safe/jmp/linux-2.6] / drivers / char / Kconfig

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index bb1c94c..d6fcd0a 100644 (file)
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -80,7 +80,7 @@ config SERIAL_NONSTANDARD
 
 config COMPUTONE
        tristate "Computone IntelliPort Plus serial support"
-       depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+       depends on SERIAL_NONSTANDARD
        ---help---
          This driver supports the entire family of Intelliport II/Plus
          controllers with the exception of the MicroChannel controllers and
@@ -138,7 +138,7 @@ config CYZ_INTR
 
 config DIGIEPCA
        tristate "Digiboard Intelligent Async Support"
-       depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && (!64BIT || BROKEN)
+       depends on SERIAL_NONSTANDARD
        ---help---
          This is a driver for Digi International's Xx, Xeve, and Xem series
          of cards which provide multiple serial ports. You would need
@@ -153,7 +153,7 @@ config DIGIEPCA
 
 config ESPSERIAL
        tristate "Hayes ESP serial port support"
-       depends on SERIAL_NONSTANDARD && ISA && BROKEN_ON_SMP && ISA_DMA_API
+       depends on SERIAL_NONSTANDARD && ISA && ISA_DMA_API
        help
          This is a driver which supports Hayes ESP serial ports.  Both single
          port cards and multiport cards are supported.  Make sure to read
@@ -166,7 +166,7 @@ config ESPSERIAL
 
 config MOXA_INTELLIO
        tristate "Moxa Intellio support"
-       depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+       depends on SERIAL_NONSTANDARD
        help
          Say Y here if you have a Moxa Intellio multiport serial card.
 
@@ -220,6 +220,14 @@ config SYNCLINKMP
          The module will be called synclinkmp.  If you want to do that, say M
          here.
 
+config SYNCLINK_GT
+       tristate "SyncLink GT/AC support"
+       depends on SERIAL_NONSTANDARD
+       help
+         Support for SyncLink GT and SyncLink AC families of
+         synchronous and asynchronous serial adapters
+         manufactured by Microgate Systems, Ltd. (www.microgate.com)
+
 config N_HDLC
        tristate "HDLC line discipline support"
        depends on SERIAL_NONSTANDARD
@@ -282,7 +290,7 @@ config SX
 
 config RIO
        tristate "Specialix RIO system support"
-       depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+       depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && !64BIT
        help
          This is a driver for the Specialix RIO, a smart serial card which
          drives an outboard box that can support up to 128 ports.  Product
@@ -661,7 +669,7 @@ config HW_RANDOM
 
 config NVRAM
        tristate "/dev/nvram support"
-       depends on ATARI || X86 || X86_64 || ARM || GENERIC_NVRAM
+       depends on ATARI || X86 || ARM || GENERIC_NVRAM
        ---help---
          If you say Y here and create a character special file /dev/nvram
          with major number 10 and minor number 144 using mknod ("man mknod"),
@@ -687,7 +695,7 @@ config NVRAM
 
 config RTC
        tristate "Enhanced Real Time Clock Support"
-       depends on !PPC32 && !PARISC && !IA64 && !M68K
+       depends on !PPC32 && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV
        ---help---
          If you say Y here and create a character special file /dev/rtc with
          major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -735,7 +743,7 @@ config SGI_IP27_RTC
 
 config GEN_RTC
        tristate "Generic /dev/rtc emulation"
-       depends on RTC!=y && !IA64 && !ARM && !PPC64 && !M32R
+       depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV
        ---help---
          If you say Y here and create a character special file /dev/rtc with
          major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -842,8 +850,7 @@ config SONYPI
 
 config TANBAC_TB0219
        tristate "TANBAC TB0219 base board support"
-       depends TANBAC_TB0229
-
+       depends TANBAC_TB022X
 
 menu "Ftape, the floppy tape device driver"
 
@@ -929,6 +936,15 @@ config SCx200_GPIO
 
          If compiled as a module, it will be called scx200_gpio.
 
+config CS5535_GPIO
+       tristate "AMD CS5535/CS5536 GPIO (Geode Companion Device)"
+       depends on X86_32
+       help
+         Give userspace access to the GPIO pins on the AMD CS5535 and
+         CS5536 Geode companion devices.
+
+         If compiled as a module, it will be called cs5535_gpio.
+
 config GPIO_VR41XX
        tristate "NEC VR4100 series General-purpose I/O Unit support"
        depends on CPU_VR41XX
@@ -944,6 +960,15 @@ config RAW_DRIVER
           Applications should simply open the device (eg /dev/hda1)
           with the O_DIRECT flag.
 
+config MAX_RAW_DEVS
+       int "Maximum number of RAW devices to support (1-8192)"
+       depends on RAW_DRIVER
+       default "256"
+       help
+         The maximum number of RAW devices that are supported.
+         Default is 256. Increase this number in case you need lots of
+         raw devices.
+
 config HPET
        bool "HPET - High Precision Event Timer" if (X86 || IA64)
        default n
@@ -975,18 +1000,9 @@ config HPET_MMAP
          exposed to the user.  If this applies to your hardware,
          say N here.
 
-config MAX_RAW_DEVS
-       int "Maximum number of RAW devices to support (1-8192)"
-       depends on RAW_DRIVER
-       default "256"
-       help
-         The maximum number of RAW devices that are supported.
-         Default is 256. Increase this number in case you need lots of
-         raw devices.
-
 config HANGCHECK_TIMER
        tristate "Hangcheck timer"
-       depends on X86_64 || X86 || IA64 || PPC64 || ARCH_S390
+       depends on X86 || IA64 || PPC64 || S390
        help
          The hangcheck-timer module detects when the system has gone
          out to lunch past a certain margin.  It can reboot the system
@@ -1002,5 +1018,17 @@ config MMTIMER
 
 source "drivers/char/tpm/Kconfig"
 
+config TELCLOCK
+       tristate "Telecom clock driver for MPBL0010 ATCA SBC"
+       depends on EXPERIMENTAL
+       default n
+       help
+         The telecom clock device is specific to the MPBL0010 ATCA computer and
+         allows direct userspace access to the configuration of the telecom clock
+         configuration settings.  This device is used for hardware synchronization
+         across the ATCA backplane fabric.  Upon loading, the driver exports a
+         sysfs directory, /sys/devices/platform/telco_clock, with a number of
+         files for controlling the behavior of this hardware.
+
 endmenu