depends on VT && !S390 && !UML
default y
+config VT_HW_CONSOLE_BINDING
+ bool "Support for binding and unbinding console drivers"
+ depends on HW_CONSOLE
+ default n
+ ---help---
+ The virtual terminal is the device that interacts with the physical
+ terminal through console drivers. On these systems, at least one
+ console driver is loaded. In other configurations, additional console
+ drivers may be enabled, such as the framebuffer console. If more than
+ 1 console driver is enabled, setting this to 'y' will allow you to
+ select the console driver that will serve as the backend for the
+ virtual terminals.
+
+ See <file:Documentation/console/console.txt> for more
+ information. For framebuffer console users, please refer to
+ <file:Documentation/fb/fbcon.txt>.
+
config SERIAL_NONSTANDARD
bool "Non-standard serial port support"
---help---
config COMPUTONE
tristate "Computone IntelliPort Plus serial support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD
---help---
This driver supports the entire family of Intelliport II/Plus
controllers with the exception of the MicroChannel controllers and
config ESPSERIAL
tristate "Hayes ESP serial port support"
- depends on SERIAL_NONSTANDARD && ISA && BROKEN_ON_SMP && ISA_DMA_API
+ depends on SERIAL_NONSTANDARD && ISA && ISA_DMA_API
help
This is a driver which supports Hayes ESP serial ports. Both single
port cards and multiport cards are supported. Make sure to read
config MOXA_INTELLIO
tristate "Moxa Intellio support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD
help
Say Y here if you have a Moxa Intellio multiport serial card.
config ISI
tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
depends on SERIAL_NONSTANDARD
+ select FW_LOADER
help
This is a driver for the Multi-Tech cards which provide several
serial ports. The driver is experimental and can currently only be
The module will be called synclinkmp. If you want to do that, say M
here.
+config SYNCLINK_GT
+ tristate "SyncLink GT/AC support"
+ depends on SERIAL_NONSTANDARD && PCI
+ help
+ Support for SyncLink GT and SyncLink AC families of
+ synchronous and asynchronous serial adapters
+ manufactured by Microgate Systems, Ltd. (www.microgate.com)
+
config N_HDLC
tristate "HDLC line discipline support"
depends on SERIAL_NONSTANDARD
config RIO
tristate "Specialix RIO system support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD
help
This is a driver for the Specialix RIO, a smart serial card which
drives an outboard box that can support up to 128 ports. Product
If unsure, say N.
+config HVC_DRIVER
+ bool
+ help
+ Users of pSeries machines that want to utilize the hvc console front-end
+ module for their backend console driver should select this option.
+ It will automatically be selected if one of the back-end console drivers
+ is selected.
+
+
config HVC_CONSOLE
bool "pSeries Hypervisor Virtual Console support"
depends on PPC_PSERIES
+ select HVC_DRIVER
help
pSeries machines when partitioned support a hypervisor virtual
console. This driver allows each pSeries partition to have a console
which is accessed via the HMC.
+config HVC_RTAS
+ bool "IBM RTAS Console support"
+ depends on PPC_RTAS
+ select HVC_DRIVER
+ help
+ IBM Console device driver which makes use of RTAS
+
config HVCS
tristate "IBM Hypervisor Virtual Console Server support"
depends on PPC_PSERIES
If you're not sure, say N.
-config HW_RANDOM
- tristate "Intel/AMD/VIA HW Random Number Generator support"
- depends on (X86 || IA64) && PCI
- ---help---
- This driver provides kernel-side support for the Random Number
- Generator hardware found on Intel i8xx-based motherboards,
- AMD 76x-based motherboards, and Via Nehemiah CPUs.
-
- Provides a character driver, used to read() entropy data.
-
- To compile this driver as a module, choose M here: the
- module will be called hw_random.
-
- If unsure, say N.
+source "drivers/char/hw_random/Kconfig"
config NVRAM
tristate "/dev/nvram support"
config RTC
tristate "Enhanced Real Time Clock Support"
- depends on !PPC32 && !PARISC && !IA64 && !M68K && (!SPARC || PCI)
+ depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC
+ depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
Samsung S3C2410. This can provide periodic interrupt rates
from 1Hz to 64Hz for user programs, and wakeup from Alarm.
-config RTC_VR41XX
- tristate "NEC VR4100 series Real Time Clock Support"
- depends on CPU_VR41XX
-
config COBALT_LCD
bool "Support for Cobalt LCD"
depends on MIPS_COBALT
config TANBAC_TB0219
tristate "TANBAC TB0219 base board support"
depends TANBAC_TB022X
+ select GPIO_VR41XX
menu "Ftape, the floppy tape device driver"
module. To compile this driver as a module, choose M here: the
module will be called ftape.
- Note that the Ftape-HOWTO is out of date (sorry) and documents the
- older version 2.08 of this software but still contains useful
- information. There is a web page with more recent documentation at
- <http://www.instmath.rwth-aachen.de/~heine/ftape/>. This page
- always contains the latest release of the ftape driver and useful
- information (backup software, ftape related patches and
- documentation, FAQ). Note that the file system interface has
- changed quite a bit compared to previous versions of ftape. Please
- read <file:Documentation/ftape.txt>.
-
source "drivers/char/ftape/Kconfig"
endmenu
config SCx200_GPIO
tristate "NatSemi SCx200 GPIO Support"
depends on SCx200
+ select NSC_GPIO
help
Give userspace access to the GPIO pins on the National
Semiconductor SCx200 processors.
If compiled as a module, it will be called scx200_gpio.
+config PC8736x_GPIO
+ tristate "NatSemi PC8736x GPIO Support"
+ depends on X86
+ default SCx200_GPIO # mostly N
+ select NSC_GPIO # needed for support routines
+ help
+ Give userspace access to the GPIO pins on the National
+ Semiconductor PC-8736x (x=[03456]) SuperIO chip. The chip
+ has multiple functional units, inc several managed by
+ hwmon/pc87360 driver. Tested with PC-87366
+
+ If compiled as a module, it will be called pc8736x_gpio.
+
+config NSC_GPIO
+ tristate "NatSemi Base GPIO Support"
+ depends on X86_32
+ # selected by SCx200_GPIO and PC8736x_GPIO
+ # what about 2 selectors differing: m != y
+ help
+ Common support used (and needed) by scx200_gpio and
+ pc8736x_gpio drivers. If those drivers are built as
+ modules, this one will be too, named nsc_gpio
+
+config CS5535_GPIO
+ tristate "AMD CS5535/CS5536 GPIO (Geode Companion Device)"
+ depends on X86_32
+ help
+ Give userspace access to the GPIO pins on the AMD CS5535 and
+ CS5536 Geode companion devices.
+
+ If compiled as a module, it will be called cs5535_gpio.
+
config GPIO_VR41XX
tristate "NEC VR4100 series General-purpose I/O Unit support"
depends on CPU_VR41XX
config HANGCHECK_TIMER
tristate "Hangcheck timer"
- depends on X86 || IA64 || PPC64 || S390
+ depends on X86 || IA64 || PPC64
help
The hangcheck-timer module detects when the system has gone
out to lunch past a certain margin. It can reboot the system
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff