config VT
bool "Virtual terminal" if EMBEDDED
+ depends on !S390
select INPUT
default y if !VIOCONS
---help---
config SERIAL_NONSTANDARD
bool "Non-standard serial port support"
+ depends on HAS_IOMEM
---help---
Say Y here if you have any non-standard serial boards -- boards
which aren't supported using the standard "dumb" serial driver.
config ROCKETPORT
tristate "Comtrol RocketPort support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
help
This driver supports Comtrol RocketPort and RocketModem PCI boards.
These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
config CYCLADES
tristate "Cyclades async mux support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && (PCI || ISA)
+ select FW_LOADER
---help---
This driver supports Cyclades Z and Y multiserial boards.
You would need something like this to connect more than two modems to
your Linux box, for instance in order to become a dial-in server.
For information about the Cyclades-Z card, read
- <file:drivers/char/README.cycladesZ>.
+ <file:Documentation/README.cycladesZ>.
To compile this driver as a module, choose M here: the
module will be called cyclades.
config DIGIEPCA
tristate "Digiboard Intelligent Async Support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
---help---
This is a driver for Digi International's Xx, Xeve, and Xem series
of cards which provide multiple serial ports. You would need
config MOXA_INTELLIO
tristate "Moxa Intellio support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
help
Say Y here if you have a Moxa Intellio multiport serial card.
module will be called moxa.
config MOXA_SMARTIO
- tristate "Moxa SmartIO support"
+ tristate "Moxa SmartIO support (OBSOLETE)"
depends on SERIAL_NONSTANDARD
help
Say Y here if you have a Moxa SmartIO multiport serial card.
here.
config MOXA_SMARTIO_NEW
- tristate "Moxa SmartIO support v. 2.0 (EXPERIMENTAL)"
+ tristate "Moxa SmartIO support v. 2.0"
depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
help
Say Y here if you have a Moxa SmartIO multiport serial card and/or
This is upgraded (1.9.1) driver from original Moxa drivers with
changes finally resulting in PCI probing.
- Use at your own risk.
-
This driver can also be built as a module. The module will be called
mxser_new. If you want to do that, say M here.
config SYNCLINKMP
tristate "SyncLink Multiport support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && PCI
help
Enable support for the SyncLink Multiport (2 or 4 ports)
serial adapter, running asynchronous and HDLC communications up
config STALLION
tristate "Stallion EasyIO or EC8/32 support"
- depends on STALDRV && BROKEN_ON_SMP
+ depends on STALDRV && BROKEN_ON_SMP && (ISA || EISA || PCI)
help
If you have an EasyIO or EasyConnection 8/32 multiport Stallion
card, then this is for you; say Y. Make sure to read
config ISTALLION
tristate "Stallion EC8/64, ONboard, Brumby support"
- depends on STALDRV && BROKEN_ON_SMP
+ depends on STALDRV && BROKEN_ON_SMP && (ISA || EISA || PCI)
help
If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
serial multiport card, say Y here. Make sure to read
To compile this driver as a module, choose M here: the
module will be called istallion.
-config AU1000_UART
- bool "Enable Au1000 UART Support"
- depends on SERIAL_NONSTANDARD && MIPS
+config NOZOMI
+ tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"
+ depends on PCI && EXPERIMENTAL
help
- If you have an Alchemy AU1000 processor (MIPS based) and you want
- to use serial ports, say Y. Otherwise, say N.
+ If you have a HSDPA driver Broadband Wireless Data Card -
+ Globe Trotter PCMCIA card, say Y here.
-config AU1000_SERIAL_CONSOLE
- bool "Enable Au1000 serial console"
- depends on AU1000_UART
- help
- If you have an Alchemy AU1000 processor (MIPS based) and you want
- to use a console on a serial port, say Y. Otherwise, say N.
+ To compile this driver as a module, choose M here, the module
+ will be called nozomi.
config A2232
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
config LEGACY_PTY_COUNT
int "Maximum number of legacy PTY in use"
depends on LEGACY_PTYS
- range 1 256
+ range 0 256
default "256"
---help---
The maximum number of legacy PTYs that can be used at any one time.
If unsure, say N.
-config TIPAR
- tristate "Texas Instruments parallel link cable support"
- depends on PARPORT
- ---help---
- If you own a Texas Instruments graphing calculator and use a
- parallel link cable, then you might be interested in this driver.
-
- If you enable this driver, you will be able to communicate with
- your calculator through a set of device nodes under /dev. The
- main advantage of this driver is that you don't have to be root
- to use this precise link cable (depending on the permissions on
- the device nodes, though).
-
- To compile this driver as a module, choose M here: the
- module will be called tipar.
-
- If you don't know what a parallel link cable is or what a Texas
- Instruments graphing calculator is, then you probably don't need this
- driver.
-
- If unsure, say N.
-
config HVC_DRIVER
bool
help
- Users of pSeries machines that want to utilize the hvc console front-end
- module for their backend console driver should select this option.
+ Generic "hypervisor virtual console" infrastructure for various
+ hypervisors (pSeries, iSeries, Xen, lguest).
It will automatically be selected if one of the back-end console drivers
is selected.
config HVC_ISERIES
bool "iSeries Hypervisor Virtual Console support"
- depends on PPC_ISERIES && !VIOCONS
+ depends on PPC_ISERIES
+ default y
select HVC_DRIVER
help
iSeries machines support a hypervisor virtual console.
help
Toshiba's Cell Reference Set Beat Console device driver
+config HVC_XEN
+ bool "Xen Hypervisor Console support"
+ depends on XEN
+ select HVC_DRIVER
+ default y
+ help
+ Xen virtual console device driver
+
+config VIRTIO_CONSOLE
+ bool
+ select HVC_DRIVER
+
config HVCS
tristate "IBM Hypervisor Virtual Console Server support"
depends on PPC_PSERIES
source "drivers/char/ipmi/Kconfig"
-source "drivers/char/watchdog/Kconfig"
-
config DS1620
tristate "NetWinder thermometer support"
depends on ARCH_NETWINDER
config RTC
tristate "Enhanced Real Time Clock Support"
- depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM && !SUPERH
+ depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV && !ARM && !SUPERH && !S390
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
To compile this driver as a module, choose M here: the
module will be called rtc.
+config JS_RTC
+ tristate "Enhanced Real Time Clock Support"
+ depends on SPARC32 && PCI
+ ---help---
+ If you say Y here and create a character special file /dev/rtc with
+ major number 10 and minor number 135 using mknod ("man mknod"), you
+ will get access to the real time clock (or hardware clock) built
+ into your computer.
+
+ Every PC has such a clock built in. It can be used to generate
+ signals from as low as 1Hz up to 8192Hz, and can also be used
+ as a 24 hour alarm. It reports status information via the file
+ /proc/driver/rtc and its behaviour is set by various ioctls on
+ /dev/rtc.
+
+ If you think you have a use for such a device (such as periodic data
+ sampling), then say Y here, and read <file:Documentation/rtc.txt>
+ for details.
+
+ To compile this driver as a module, choose M here: the
+ module will be called js-rtc.
+
config SGI_DS1286
tristate "SGI DS1286 RTC support"
depends on SGI_IP22
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV
+ depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
config DTLK
tristate "Double Talk PC internal speech card support"
+ depends on ISA
help
This driver is for the DoubleTalk PC, a speech synthesizer
manufactured by RC Systems (<http://www.rcsys.com/>). It is also
To compile this driver as a module, choose M here: the
module will be called sonypi.
-config TANBAC_TB0219
- tristate "TANBAC TB0219 base board support"
+config GPIO_TB0219
+ tristate "TANBAC TB0219 GPIO support"
depends on TANBAC_TB022X
select GPIO_VR41XX
-source "drivers/char/agp/Kconfig"
-
-source "drivers/char/drm/Kconfig"
-
source "drivers/char/pcmcia/Kconfig"
config MWAVE
depends on CPU_VR41XX
config RAW_DRIVER
- tristate "RAW driver (/dev/raw/rawN) (OBSOLETE)"
+ tristate "RAW driver (/dev/raw/rawN)"
depends on BLOCK
help
- The raw driver permits block devices to be bound to /dev/raw/rawN.
- Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
+ The raw driver permits block devices to be bound to /dev/raw/rawN.
+ Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
See the raw(8) manpage for more details.
- The raw driver is deprecated and will be removed soon.
- Applications should simply open the device (eg /dev/hda1)
+ Applications should preferably open the device (eg /dev/hda1)
with the O_DIRECT flag.
config MAX_RAW_DEVS
config HANGCHECK_TIMER
tristate "Hangcheck timer"
- depends on X86 || IA64 || PPC64
+ depends on X86 || IA64 || PPC64 || S390
help
The hangcheck-timer module detects when the system has gone
out to lunch past a certain margin. It can reboot the system
source "drivers/char/tpm/Kconfig"
config TELCLOCK
- tristate "Telecom clock driver for MPBL0010 ATCA SBC"
+ tristate "Telecom clock driver for ATCA SBC"
depends on EXPERIMENTAL && X86
default n
help
- The telecom clock device is specific to the MPBL0010 ATCA computer and
- allows direct userspace access to the configuration of the telecom clock
- configuration settings. This device is used for hardware synchronization
- across the ATCA backplane fabric. Upon loading, the driver exports a
- sysfs directory, /sys/devices/platform/telco_clock, with a number of
- files for controlling the behavior of this hardware.
+ The telecom clock device is specific to the MPCBL0010 and MPCBL0050
+ ATCA computers and allows direct userspace access to the
+ configuration of the telecom clock configuration settings. This
+ device is used for hardware synchronization across the ATCA backplane
+ fabric. Upon loading, the driver exports a sysfs directory,
+ /sys/devices/platform/telco_clock, with a number of files for
+ controlling the behavior of this hardware.
+
+config DEVPORT
+ bool
+ depends on !M68K
+ depends on ISA || PCI
+ default y
+
+source "drivers/s390/char/Kconfig"
endmenu
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff