intelfb: support 945GME (as used in ASUS Eee 901)

[safe/jmp/linux-2.6] / drivers / bluetooth / hci_ldisc.c

diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 613673b..4426bb5 100644 (file)
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -23,12 +23,10 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/sched.h>
 #include <linux/types.h>
 #include <linux/fcntl.h>
 #include <linux/interrupt.h>
@@ -145,7 +143,7 @@ restart:
                int len;
 
                set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
-               len = tty->driver->write(tty, skb->data, skb->len);
+               len = tty->ops->write(tty, skb->data, skb->len);
                hdev->stat.byte_tx += len;
 
                skb_pull(skb, len);
@@ -192,8 +190,7 @@ static int hci_uart_flush(struct hci_dev *hdev)
 
        /* Flush any pending characters in the driver and discipline. */
        tty_ldisc_flush(tty);
-       if (tty->driver->flush_buffer)
-               tty->driver->flush_buffer(tty);
+       tty_driver_flush_buffer(tty);
 
        if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
                hu->proto->flush(hu);
@@ -210,6 +207,7 @@ static int hci_uart_close(struct hci_dev *hdev)
                return 0;
 
        hci_uart_flush(hdev);
+       hdev->flush = NULL;
        return 0;
 }
 
@@ -242,15 +240,11 @@ static int hci_uart_send_frame(struct sk_buff *skb)
 
 static void hci_uart_destruct(struct hci_dev *hdev)
 {
-       struct hci_uart *hu;
-
        if (!hdev)
                return;
 
        BT_DBG("%s", hdev->name);
-
-       hu = (struct hci_uart *) hdev->driver_data;
-       kfree(hu);
+       kfree(hdev->driver_data);
 }
 
 /* ------ LDISC part ------ */
@@ -273,7 +267,7 @@ static int hci_uart_tty_open(struct tty_struct *tty)
                return -EEXIST;
 
        if (!(hu = kzalloc(sizeof(struct hci_uart), GFP_KERNEL))) {
-               BT_ERR("Can't allocate controll structure");
+               BT_ERR("Can't allocate control structure");
                return -ENFILE;
        }
 
@@ -288,11 +282,9 @@ static int hci_uart_tty_open(struct tty_struct *tty)
        /* FIXME: why is this needed. Note don't use ldisc_ref here as the
           open path is before the ldisc is referencable */
 
-       if (tty->ldisc.flush_buffer)
-               tty->ldisc.flush_buffer(tty);
-
-       if (tty->driver->flush_buffer)
-               tty->driver->flush_buffer(tty);
+       if (tty->ldisc.ops->flush_buffer)
+               tty->ldisc.ops->flush_buffer(tty);
+       tty_driver_flush_buffer(tty);
 
        return 0;
 }
@@ -313,7 +305,9 @@ static void hci_uart_tty_close(struct tty_struct *tty)
 
        if (hu) {
                struct hci_dev *hdev = hu->hdev;
-               hci_uart_close(hdev);
+
+               if (hdev)
+                       hci_uart_close(hdev);
 
                if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) {
                        hu->proto->close(hu);
@@ -361,7 +355,7 @@ static void hci_uart_tty_wakeup(struct tty_struct *tty)
  *     
  * Return Value:    None
  */
-static void hci_uart_tty_receive(struct tty_struct *tty, const __u8 *data, char *flags, int count)
+static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, char *flags, int count)
 {
        struct hci_uart *hu = (void *)tty->disc_data;
 
@@ -376,8 +370,7 @@ static void hci_uart_tty_receive(struct tty_struct *tty, const __u8 *data, char
        hu->hdev->stat.byte_rx += count;
        spin_unlock(&hu->rx_lock);
 
-       if (test_and_clear_bit(TTY_THROTTLED,&tty->flags) && tty->driver->unthrottle)
-               tty->driver->unthrottle(tty);
+       tty_unthrottle(tty);
 }
 
 static int hci_uart_register_dev(struct hci_uart *hu)
@@ -478,14 +471,20 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file,
                        tty->low_latency = 1;
                } else
                        return -EBUSY;
+               break;
 
        case HCIUARTGETPROTO:
                if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
                        return hu->proto->id;
                return -EUNATCH;
 
+       case HCIUARTGETDEVICE:
+               if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
+                       return hu->hdev->id;
+               return -EUNATCH;
+
        default:
-               err = n_tty_ioctl(tty, file, cmd, arg);
+               err = n_tty_ioctl_helper(tty, file, cmd, arg);
                break;
        };
 
@@ -515,7 +514,7 @@ static unsigned int hci_uart_tty_poll(struct tty_struct *tty,
 
 static int __init hci_uart_init(void)
 {
-       static struct tty_ldisc hci_uart_ldisc;
+       static struct tty_ldisc_ops hci_uart_ldisc;
        int err;
 
        BT_INFO("HCI UART driver ver %s", VERSION);
@@ -546,7 +545,10 @@ static int __init hci_uart_init(void)
 #ifdef CONFIG_BT_HCIUART_BCSP
        bcsp_init();
 #endif
-       
+#ifdef CONFIG_BT_HCIUART_LL
+       ll_init();
+#endif
+
        return 0;
 }
 
@@ -560,6 +562,9 @@ static void __exit hci_uart_exit(void)
 #ifdef CONFIG_BT_HCIUART_BCSP
        bcsp_deinit();
 #endif
+#ifdef CONFIG_BT_HCIUART_LL
+       ll_deinit();
+#endif
 
        /* Release tty registration of line discipline */
        if ((err = tty_unregister_ldisc(N_HCI)))
@@ -572,7 +577,7 @@ module_exit(hci_uart_exit);
 module_param(reset, bool, 0644);
 MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth HCI UART driver ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");