/* ======================== Module parameters ======================== */
-MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>, Jose Orlando Pereira <jop@di.uminho.pt>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth driver for the 3Com Bluetooth PCMCIA card");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE("BT3CPCC.bin");
bt3c_info_t *info = dev_inst;
unsigned int iobase;
int iir;
+ irqreturn_t r = IRQ_NONE;
- BUG_ON(!info->hdev);
+ if (!info || !info->hdev)
+ /* our irq handler is shared */
+ return IRQ_NONE;
iobase = info->p_dev->io.BasePort1;
BT_ERR("Very strange (stat=0x%04x)", stat);
} else if ((stat & 0xff) != 0xff) {
if (stat & 0x0020) {
- int stat = bt3c_read(iobase, 0x7002) & 0x10;
+ int status = bt3c_read(iobase, 0x7002) & 0x10;
BT_INFO("%s: Antenna %s", info->hdev->name,
- stat ? "out" : "in");
+ status ? "out" : "in");
}
if (stat & 0x0001)
bt3c_receive(info);
outb(iir, iobase + CONTROL);
}
+ r = IRQ_HANDLED;
}
spin_unlock(&(info->lock));
- return IRQ_HANDLED;
+ return r;
}
memset(b, 0, sizeof(b));
memcpy(b, ptr + 2, 2);
- size = simple_strtol(b, NULL, 16);
+ size = simple_strtoul(b, NULL, 16);
memset(b, 0, sizeof(b));
memcpy(b, ptr + 4, 8);
- addr = simple_strtol(b, NULL, 16);
+ addr = simple_strtoul(b, NULL, 16);
memset(b, 0, sizeof(b));
memcpy(b, ptr + (size * 2) + 2, 2);
- fcs = simple_strtol(b, NULL, 16);
+ fcs = simple_strtoul(b, NULL, 16);
memset(b, 0, sizeof(b));
for (tmp = 0, i = 0; i < size; i++) {
memset(b, 0, sizeof(b));
for (i = 0; i < (size - 4) / 2; i++) {
memcpy(b, ptr + (i * 4) + 12, 4);
- tmp = simple_strtol(b, NULL, 16);
+ tmp = simple_strtoul(b, NULL, 16);
bt3c_put(iobase, tmp);
}
}
info->hdev = hdev;
- hdev->type = HCI_PCCARD;
+ hdev->bus = HCI_PCCARD;
hdev->driver_data = info;
SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 8;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
- link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = bt3c_interrupt;
- link->irq.Instance = info;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
goto found_port;
BT_ERR("No usable port range found");
- cs_error(link, RequestIO, -ENODEV);
goto failed;
found_port:
i = pcmcia_request_irq(link, &link->irq);
- if (i != 0) {
- cs_error(link, RequestIRQ, i);
+ if (i != 0)
link->irq.AssignedIRQ = 0;
- }
i = pcmcia_request_configuration(link, &link->conf);
- if (i != 0) {
- cs_error(link, RequestConfiguration, i);
+ if (i != 0)
goto failed;
- }
if (bt3c_open(info) != 0)
goto failed;