* 1581's logical side 0 is on physical side 1, whereas the Sharp's logical
* side 0 is on physical side 0 (but with the misnamed sector IDs).
* 'stretch' should probably be renamed to something more general, like
- * 'options'. Other parameters should be self-explanatory (see also
- * setfdprm(8)).
+ * 'options'.
+ *
+ * Bits 2 through 9 of 'stretch' tell the number of the first sector.
+ * The LSB (bit 2) is flipped. For most disks, the first sector
+ * is 1 (represented by 0x00<<2). For some CP/M and music sampler
+ * disks (such as Ensoniq EPS 16plus) it is 0 (represented as 0x01<<2).
+ * For Amstrad CPC disks it is 0xC1 (represented as 0xC0<<2).
+ *
+ * Other parameters should be self-explanatory (see also setfdprm(8)).
*/
/*
Size
static void recalibrate_floppy(void);
static void floppy_shutdown(unsigned long);
+static int floppy_request_regions(int);
+static void floppy_release_regions(int);
static int floppy_grab_irq_and_dma(void);
static void floppy_release_irq_and_dma(void);
}
}
}
- if (_floppy->stretch & FD_ZEROBASED) {
+ if (_floppy->stretch & FD_SECTBASEMASK) {
for (count = 0; count < F_SECT_PER_TRACK; count++)
- here[count].sect--;
+ here[count].sect += FD_SECTBASE(_floppy) - 1;
}
}
}
HEAD = fsector_t / _floppy->sect;
- if (((_floppy->stretch & (FD_SWAPSIDES | FD_ZEROBASED)) ||
+ if (((_floppy->stretch & (FD_SWAPSIDES | FD_SECTBASEMASK)) ||
TESTF(FD_NEED_TWADDLE)) && fsector_t < _floppy->sect)
max_sector = _floppy->sect;
CODE2SIZE;
SECT_PER_TRACK = _floppy->sect << 2 >> SIZECODE;
SECTOR = ((fsector_t % _floppy->sect) << 2 >> SIZECODE) +
- ((_floppy->stretch & FD_ZEROBASED) ? 0 : 1);
+ FD_SECTBASE(_floppy);
/* tracksize describes the size which can be filled up with sectors
* of size ssize.
g->head <= 0 ||
g->track <= 0 || g->track > UDP->tracks >> STRETCH(g) ||
/* check if reserved bits are set */
- (g->stretch & ~(FD_STRETCH | FD_SWAPSIDES | FD_ZEROBASED)) != 0)
+ (g->stretch & ~(FD_STRETCH | FD_SWAPSIDES | FD_SECTBASEMASK)) != 0)
return -EINVAL;
if (type) {
if (!capable(CAP_SYS_ADMIN))
if (DRS->maxblock > user_params[drive].sect ||
DRS->maxtrack ||
((user_params[drive].sect ^ oldStretch) &
- (FD_SWAPSIDES | FD_ZEROBASED)))
+ (FD_SWAPSIDES | FD_SECTBASEMASK)))
invalidate_drive(bdev);
else
process_fd_request();
return 0;
}
-static int fd_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
+static int fd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd,
unsigned long param)
{
-#define FD_IOCTL_ALLOWED ((filp) && (filp)->private_data)
+#define FD_IOCTL_ALLOWED (mode & (FMODE_WRITE|FMODE_WRITE_IOCTL))
#define OUT(c,x) case c: outparam = (const char *) (x); break
#define IN(c,x,tag) case c: *(x) = inparam. tag ; return 0
- int drive = (long)inode->i_bdev->bd_disk->private_data;
+ int drive = (long)bdev->bd_disk->private_data;
int type = ITYPE(UDRS->fd_device);
int i;
int ret;
current_type[drive] = NULL;
floppy_sizes[drive] = MAX_DISK_SIZE << 1;
UDRS->keep_data = 0;
- return invalidate_drive(inode->i_bdev);
+ return invalidate_drive(bdev);
case FDSETPRM:
case FDDEFPRM:
return set_geometry(cmd, &inparam.g,
- drive, type, inode->i_bdev);
+ drive, type, bdev);
case FDGETPRM:
ECALL(get_floppy_geometry(drive, type,
(struct floppy_struct **)
case FDFMTEND:
case FDFLUSH:
LOCK_FDC(drive, 1);
- return invalidate_drive(inode->i_bdev);
+ return invalidate_drive(bdev);
case FDSETEMSGTRESH:
UDP->max_errors.reporting =
printk("\n");
}
-static int floppy_release(struct inode *inode, struct file *filp)
+static int floppy_release(struct gendisk *disk, fmode_t mode)
{
- int drive = (long)inode->i_bdev->bd_disk->private_data;
+ int drive = (long)disk->private_data;
mutex_lock(&open_lock);
if (UDRS->fd_ref < 0)
* /dev/PS0 etc), and disallows simultaneous access to the same
* drive with different device numbers.
*/
-static int floppy_open(struct inode *inode, struct file *filp)
+static int floppy_open(struct block_device *bdev, fmode_t mode)
{
- int drive = (long)inode->i_bdev->bd_disk->private_data;
- int old_dev;
+ int drive = (long)bdev->bd_disk->private_data;
+ int old_dev, new_dev;
int try;
int res = -EBUSY;
char *tmp;
- filp->private_data = (void *)0;
mutex_lock(&open_lock);
old_dev = UDRS->fd_device;
- if (opened_bdev[drive] && opened_bdev[drive] != inode->i_bdev)
+ if (opened_bdev[drive] && opened_bdev[drive] != bdev)
goto out2;
if (!UDRS->fd_ref && (UDP->flags & FD_BROKEN_DCL)) {
USETF(FD_VERIFY);
}
- if (UDRS->fd_ref == -1 || (UDRS->fd_ref && (filp->f_flags & O_EXCL)))
+ if (UDRS->fd_ref == -1 || (UDRS->fd_ref && (mode & FMODE_EXCL)))
goto out2;
- if (filp->f_flags & O_EXCL)
+ if (mode & FMODE_EXCL)
UDRS->fd_ref = -1;
else
UDRS->fd_ref++;
- opened_bdev[drive] = inode->i_bdev;
+ opened_bdev[drive] = bdev;
res = -ENXIO;
}
}
- UDRS->fd_device = iminor(inode);
- set_capacity(disks[drive], floppy_sizes[iminor(inode)]);
- if (old_dev != -1 && old_dev != iminor(inode)) {
+ new_dev = MINOR(bdev->bd_dev);
+ UDRS->fd_device = new_dev;
+ set_capacity(disks[drive], floppy_sizes[new_dev]);
+ if (old_dev != -1 && old_dev != new_dev) {
if (buffer_drive == drive)
buffer_track = -1;
}
- /* Allow ioctls if we have write-permissions even if read-only open.
- * Needed so that programs such as fdrawcmd still can work on write
- * protected disks */
- if ((filp->f_mode & FMODE_WRITE) || !file_permission(filp, MAY_WRITE))
- filp->private_data = (void *)8;
-
if (UFDCS->rawcmd == 1)
UFDCS->rawcmd = 2;
- if (!(filp->f_flags & O_NDELAY)) {
- if (filp->f_mode & 3) {
+ if (!(mode & FMODE_NDELAY)) {
+ if (mode & (FMODE_READ|FMODE_WRITE)) {
UDRS->last_checked = 0;
- check_disk_change(inode->i_bdev);
+ check_disk_change(bdev);
if (UTESTF(FD_DISK_CHANGED))
goto out;
}
res = -EROFS;
- if ((filp->f_mode & 2) && !(UTESTF(FD_DISK_WRITABLE)))
+ if ((mode & FMODE_WRITE) && !(UTESTF(FD_DISK_WRITABLE)))
goto out;
}
mutex_unlock(&open_lock);
.owner = THIS_MODULE,
.open = floppy_open,
.release = floppy_release,
- .ioctl = fd_ioctl,
+ .locked_ioctl = fd_ioctl,
.getgeo = fd_getgeo,
.media_changed = check_floppy_change,
.revalidate_disk = floppy_revalidate,
printk("\n");
} else
DPRINT("botched floppy option\n");
- DPRINT("Read Documentation/floppy.txt\n");
+ DPRINT("Read Documentation/blockdev/floppy.txt\n");
return 0;
}
int i, unit, drive;
int err, dr;
-#if defined(CONFIG_PPC_MERGE)
+#if defined(CONFIG_PPC)
if (check_legacy_ioport(FDC1))
return -ENODEV;
#endif
FDCS->rawcmd = 2;
if (user_reset_fdc(-1, FD_RESET_ALWAYS, 0)) {
/* free ioports reserved by floppy_grab_irq_and_dma() */
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
+ floppy_release_regions(fdc);
FDCS->address = -1;
FDCS->version = FDC_NONE;
continue;
FDCS->version = get_fdc_version();
if (FDCS->version == FDC_NONE) {
/* free ioports reserved by floppy_grab_irq_and_dma() */
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
+ floppy_release_regions(fdc);
FDCS->address = -1;
continue;
}
static DEFINE_SPINLOCK(floppy_usage_lock);
+static const struct io_region {
+ int offset;
+ int size;
+} io_regions[] = {
+ { 2, 1 },
+ /* address + 3 is sometimes reserved by pnp bios for motherboard */
+ { 4, 2 },
+ /* address + 6 is reserved, and may be taken by IDE.
+ * Unfortunately, Adaptec doesn't know this :-(, */
+ { 7, 1 },
+};
+
+static void floppy_release_allocated_regions(int fdc, const struct io_region *p)
+{
+ while (p != io_regions) {
+ p--;
+ release_region(FDCS->address + p->offset, p->size);
+ }
+}
+
+#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)]))
+
+static int floppy_request_regions(int fdc)
+{
+ const struct io_region *p;
+
+ for (p = io_regions; p < ARRAY_END(io_regions); p++) {
+ if (!request_region(FDCS->address + p->offset, p->size, "floppy")) {
+ DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address + p->offset);
+ floppy_release_allocated_regions(fdc, p);
+ return -EBUSY;
+ }
+ }
+ return 0;
+}
+
+static void floppy_release_regions(int fdc)
+{
+ floppy_release_allocated_regions(fdc, ARRAY_END(io_regions));
+}
+
static int floppy_grab_irq_and_dma(void)
{
unsigned long flags;
for (fdc = 0; fdc < N_FDC; fdc++) {
if (FDCS->address != -1) {
- if (!request_region(FDCS->address + 2, 4, "floppy")) {
- DPRINT("Floppy io-port 0x%04lx in use\n",
- FDCS->address + 2);
- goto cleanup1;
- }
- if (!request_region(FDCS->address + 7, 1, "floppy DIR")) {
- DPRINT("Floppy io-port 0x%04lx in use\n",
- FDCS->address + 7);
- goto cleanup2;
- }
- /* address + 6 is reserved, and may be taken by IDE.
- * Unfortunately, Adaptec doesn't know this :-(, */
+ if (floppy_request_regions(fdc))
+ goto cleanup;
}
}
for (fdc = 0; fdc < N_FDC; fdc++) {
fdc = 0;
irqdma_allocated = 1;
return 0;
-cleanup2:
- release_region(FDCS->address + 2, 4);
-cleanup1:
+cleanup:
fd_free_irq();
fd_free_dma();
- while (--fdc >= 0) {
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
- }
+ while (--fdc >= 0)
+ floppy_release_regions(fdc);
spin_lock_irqsave(&floppy_usage_lock, flags);
usage_count--;
spin_unlock_irqrestore(&floppy_usage_lock, flags);
#endif
old_fdc = fdc;
for (fdc = 0; fdc < N_FDC; fdc++)
- if (FDCS->address != -1) {
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
- }
+ if (FDCS->address != -1)
+ floppy_release_regions(fdc);
fdc = old_fdc;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff