/*
- * Disk Array driver for Compaq SA53xx Controllers, SCSI Tape module
- * Copyright 2001 Compaq Computer Corporation
+ * Disk Array driver for HP Smart Array controllers, SCSI Tape module.
+ * (C) Copyright 2001, 2007 Hewlett-Packard Development Company, L.P.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more details.
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * Foundation, Inc., 59 Temple Place, Suite 300, Boston, MA
+ * 02111-1307, USA.
*
* Questions/Comments/Bugfixes to iss_storagedev@hp.com
*
#include <asm/atomic.h>
-#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#define CCISS_ABORT_MSG 0x00
#define CCISS_RESET_MSG 0x01
-/* some prototypes... */
-static int sendcmd(
- __u8 cmd,
- int ctlr,
- void *buff,
- size_t size,
- unsigned int use_unit_num, /* 0: address the controller,
- 1: address logical volume log_unit,
- 2: address is in scsi3addr */
- unsigned int log_unit,
- __u8 page_code,
- unsigned char *scsi3addr,
+static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff,
+ size_t size,
+ __u8 page_code, unsigned char *scsi3addr,
int cmd_type);
+static CommandList_struct *cmd_alloc(ctlr_info_t *h, int get_from_pool);
+static void cmd_free(ctlr_info_t *h, CommandList_struct *c, int got_from_pool);
static int cciss_scsi_proc_info(
struct Scsi_Host *sh,
.queuecommand = cciss_scsi_queue_command,
.can_queue = SCSI_CCISS_CAN_QUEUE,
.this_id = 7,
- .sg_tablesize = MAXSGENTRIES,
.cmd_per_lun = 1,
.use_clustering = DISABLE_CLUSTERING,
/* Can't have eh_bus_reset_handler or eh_host_reset_handler for cciss */
};
#pragma pack(1)
+
+#define SCSI_PAD_32 0
+#define SCSI_PAD_64 0
+
struct cciss_scsi_cmd_stack_elem_t {
CommandList_struct cmd;
ErrorInfo_struct Err;
__u32 busaddr;
- __u32 pad;
+ int cmdindex;
+ u8 pad[IS_32_BIT * SCSI_PAD_32 + IS_64_BIT * SCSI_PAD_64];
};
#pragma pack()
struct cciss_scsi_adapter_data_t {
struct Scsi_Host *scsi_host;
struct cciss_scsi_cmd_stack_t cmd_stack;
+ SGDescriptor_struct **cmd_sg_list;
int registered;
spinlock_t lock; // to protect ccissscsi[ctlr];
};
#define CPQ_TAPE_LOCK(ctlr, flags) spin_lock_irqsave( \
- &(((struct cciss_scsi_adapter_data_t *) \
- hba[ctlr]->scsi_ctlr)->lock), flags);
+ &hba[ctlr]->scsi_ctlr->lock, flags);
#define CPQ_TAPE_UNLOCK(ctlr, flags) spin_unlock_irqrestore( \
- &(((struct cciss_scsi_adapter_data_t *) \
- hba[ctlr]->scsi_ctlr)->lock), flags);
+ &hba[ctlr]->scsi_ctlr->lock, flags);
static CommandList_struct *
scsi_cmd_alloc(ctlr_info_t *h)
struct cciss_scsi_cmd_stack_t *stk;
u64bit temp64;
- sa = (struct cciss_scsi_adapter_data_t *) h->scsi_ctlr;
+ sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
if (stk->top < 0)
memset(&c->Err, 0, sizeof(c->Err));
/* set physical addr of cmd and addr of scsi parameters */
c->cmd.busaddr = c->busaddr;
+ c->cmd.cmdindex = c->cmdindex;
/* (__u32) (stk->cmd_pool_handle +
(sizeof(struct cciss_scsi_cmd_stack_elem_t)*stk->top)); */
struct cciss_scsi_adapter_data_t *sa;
struct cciss_scsi_cmd_stack_t *stk;
- sa = (struct cciss_scsi_adapter_data_t *) h->scsi_ctlr;
+ sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
if (stk->top >= CMD_STACK_SIZE) {
printk("cciss: scsi_cmd_free called too many times.\n");
struct cciss_scsi_cmd_stack_t *stk;
size_t size;
+ sa->cmd_sg_list = cciss_allocate_sg_chain_blocks(hba[ctlr],
+ hba[ctlr]->chainsize, CMD_STACK_SIZE);
+ if (!sa->cmd_sg_list && hba[ctlr]->chainsize > 0)
+ return -ENOMEM;
+
stk = &sa->cmd_stack;
size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * CMD_STACK_SIZE;
- // pci_alloc_consistent guarantees 32-bit DMA address will
- // be used
-
+ /* Check alignment, see cciss_cmd.h near CommandList_struct def. */
+ BUILD_BUG_ON((sizeof(*stk->pool) % COMMANDLIST_ALIGNMENT) != 0);
+ /* pci_alloc_consistent guarantees 32-bit DMA address will be used */
stk->pool = (struct cciss_scsi_cmd_stack_elem_t *)
pci_alloc_consistent(hba[ctlr]->pdev, size, &stk->cmd_pool_handle);
if (stk->pool == NULL) {
- printk("stk->pool is null\n");
- return -1;
+ cciss_free_sg_chain_blocks(sa->cmd_sg_list, CMD_STACK_SIZE);
+ sa->cmd_sg_list = NULL;
+ return -ENOMEM;
}
for (i=0; i<CMD_STACK_SIZE; i++) {
stk->elem[i] = &stk->pool[i];
stk->elem[i]->busaddr = (__u32) (stk->cmd_pool_handle +
(sizeof(struct cciss_scsi_cmd_stack_elem_t) * i));
+ stk->elem[i]->cmdindex = i;
}
stk->top = CMD_STACK_SIZE-1;
return 0;
struct cciss_scsi_cmd_stack_t *stk;
size_t size;
- sa = (struct cciss_scsi_adapter_data_t *) hba[ctlr]->scsi_ctlr;
+ sa = hba[ctlr]->scsi_ctlr;
stk = &sa->cmd_stack;
if (stk->top != CMD_STACK_SIZE-1) {
printk( "cciss: %d scsi commands are still outstanding.\n",
pci_free_consistent(hba[ctlr]->pdev, size, stk->pool, stk->cmd_pool_handle);
stk->pool = NULL;
+ cciss_free_sg_chain_blocks(sa->cmd_sg_list, CMD_STACK_SIZE);
}
-/* scsi_device_types comes from scsi.h */
-#define DEVICETYPE(n) (n<0 || n>MAX_SCSI_DEVICE_CODE) ? \
- "Unknown" : scsi_device_types[n]
-
#if 0
static int xmargin=8;
static int amargin=60;
}
return (!found);
}
+struct scsi2map {
+ char scsi3addr[8];
+ int bus, target, lun;
+};
static int
cciss_scsi_add_entry(int ctlr, int hostno,
- unsigned char *scsi3addr, int devtype)
+ struct cciss_scsi_dev_t *device,
+ struct scsi2map *added, int *nadded)
{
/* assumes hba[ctlr]->scsi_ctlr->lock is held */
int n = ccissscsi[ctlr].ndevices;
struct cciss_scsi_dev_t *sd;
+ int i, bus, target, lun;
+ unsigned char addr1[8], addr2[8];
if (n >= CCISS_MAX_SCSI_DEVS_PER_HBA) {
printk("cciss%d: Too many devices, "
"some will be inaccessible.\n", ctlr);
return -1;
}
+
+ bus = target = -1;
+ lun = 0;
+ /* Is this device a non-zero lun of a multi-lun device */
+ /* byte 4 of the 8-byte LUN addr will contain the logical unit no. */
+ if (device->scsi3addr[4] != 0) {
+ /* Search through our list and find the device which */
+ /* has the same 8 byte LUN address, excepting byte 4. */
+ /* Assign the same bus and target for this new LUN. */
+ /* Use the logical unit number from the firmware. */
+ memcpy(addr1, device->scsi3addr, 8);
+ addr1[4] = 0;
+ for (i = 0; i < n; i++) {
+ sd = &ccissscsi[ctlr].dev[i];
+ memcpy(addr2, sd->scsi3addr, 8);
+ addr2[4] = 0;
+ /* differ only in byte 4? */
+ if (memcmp(addr1, addr2, 8) == 0) {
+ bus = sd->bus;
+ target = sd->target;
+ lun = device->scsi3addr[4];
+ break;
+ }
+ }
+ }
+
sd = &ccissscsi[ctlr].dev[n];
- if (find_bus_target_lun(ctlr, &sd->bus, &sd->target, &sd->lun) != 0)
- return -1;
- memcpy(&sd->scsi3addr[0], scsi3addr, 8);
- sd->devtype = devtype;
+ if (lun == 0) {
+ if (find_bus_target_lun(ctlr,
+ &sd->bus, &sd->target, &sd->lun) != 0)
+ return -1;
+ } else {
+ sd->bus = bus;
+ sd->target = target;
+ sd->lun = lun;
+ }
+ added[*nadded].bus = sd->bus;
+ added[*nadded].target = sd->target;
+ added[*nadded].lun = sd->lun;
+ (*nadded)++;
+
+ memcpy(sd->scsi3addr, device->scsi3addr, 8);
+ memcpy(sd->vendor, device->vendor, sizeof(sd->vendor));
+ memcpy(sd->revision, device->revision, sizeof(sd->revision));
+ memcpy(sd->device_id, device->device_id, sizeof(sd->device_id));
+ sd->devtype = device->devtype;
+
ccissscsi[ctlr].ndevices++;
/* initially, (before registering with scsi layer) we don't
time anyway (the scsi layer's inquiries will show that info) */
if (hostno != -1)
printk("cciss%d: %s device c%db%dt%dl%d added.\n",
- ctlr, DEVICETYPE(sd->devtype), hostno,
+ ctlr, scsi_device_type(sd->devtype), hostno,
sd->bus, sd->target, sd->lun);
return 0;
}
static void
-cciss_scsi_remove_entry(int ctlr, int hostno, int entry)
+cciss_scsi_remove_entry(int ctlr, int hostno, int entry,
+ struct scsi2map *removed, int *nremoved)
{
/* assumes hba[ctlr]->scsi_ctlr->lock is held */
int i;
if (entry < 0 || entry >= CCISS_MAX_SCSI_DEVS_PER_HBA) return;
sd = ccissscsi[ctlr].dev[entry];
+ removed[*nremoved].bus = sd.bus;
+ removed[*nremoved].target = sd.target;
+ removed[*nremoved].lun = sd.lun;
+ (*nremoved)++;
for (i=entry;i<ccissscsi[ctlr].ndevices-1;i++)
ccissscsi[ctlr].dev[i] = ccissscsi[ctlr].dev[i+1];
ccissscsi[ctlr].ndevices--;
printk("cciss%d: %s device c%db%dt%dl%d removed.\n",
- ctlr, DEVICETYPE(sd.devtype), hostno,
+ ctlr, scsi_device_type(sd.devtype), hostno,
sd.bus, sd.target, sd.lun);
}
(a)[1] == (b)[1] && \
(a)[0] == (b)[0])
+static void fixup_botched_add(int ctlr, char *scsi3addr)
+{
+ /* called when scsi_add_device fails in order to re-adjust */
+ /* ccissscsi[] to match the mid layer's view. */
+ unsigned long flags;
+ int i, j;
+ CPQ_TAPE_LOCK(ctlr, flags);
+ for (i = 0; i < ccissscsi[ctlr].ndevices; i++) {
+ if (memcmp(scsi3addr,
+ ccissscsi[ctlr].dev[i].scsi3addr, 8) == 0) {
+ for (j = i; j < ccissscsi[ctlr].ndevices-1; j++)
+ ccissscsi[ctlr].dev[j] =
+ ccissscsi[ctlr].dev[j+1];
+ ccissscsi[ctlr].ndevices--;
+ break;
+ }
+ }
+ CPQ_TAPE_UNLOCK(ctlr, flags);
+}
+
+static int device_is_the_same(struct cciss_scsi_dev_t *dev1,
+ struct cciss_scsi_dev_t *dev2)
+{
+ return dev1->devtype == dev2->devtype &&
+ memcmp(dev1->scsi3addr, dev2->scsi3addr,
+ sizeof(dev1->scsi3addr)) == 0 &&
+ memcmp(dev1->device_id, dev2->device_id,
+ sizeof(dev1->device_id)) == 0 &&
+ memcmp(dev1->vendor, dev2->vendor,
+ sizeof(dev1->vendor)) == 0 &&
+ memcmp(dev1->model, dev2->model,
+ sizeof(dev1->model)) == 0 &&
+ memcmp(dev1->revision, dev2->revision,
+ sizeof(dev1->revision)) == 0;
+}
+
static int
adjust_cciss_scsi_table(int ctlr, int hostno,
struct cciss_scsi_dev_t sd[], int nsds)
int i,j, found, changes=0;
struct cciss_scsi_dev_t *csd;
unsigned long flags;
+ struct scsi2map *added, *removed;
+ int nadded, nremoved;
+ struct Scsi_Host *sh = NULL;
+
+ added = kzalloc(sizeof(*added) * CCISS_MAX_SCSI_DEVS_PER_HBA,
+ GFP_KERNEL);
+ removed = kzalloc(sizeof(*removed) * CCISS_MAX_SCSI_DEVS_PER_HBA,
+ GFP_KERNEL);
+
+ if (!added || !removed) {
+ printk(KERN_WARNING "cciss%d: Out of memory in "
+ "adjust_cciss_scsi_table\n", ctlr);
+ goto free_and_out;
+ }
CPQ_TAPE_LOCK(ctlr, flags);
+ if (hostno != -1) /* if it's not the first time... */
+ sh = hba[ctlr]->scsi_ctlr->scsi_host;
+
/* find any devices in ccissscsi[] that are not in
sd[] and remove them from ccissscsi[] */
i = 0;
+ nremoved = 0;
+ nadded = 0;
while(i<ccissscsi[ctlr].ndevices) {
csd = &ccissscsi[ctlr].dev[i];
found=0;
for (j=0;j<nsds;j++) {
if (SCSI3ADDR_EQ(sd[j].scsi3addr,
csd->scsi3addr)) {
- if (sd[j].devtype == csd->devtype)
+ if (device_is_the_same(&sd[j], csd))
found=2;
else
found=1;
if (found == 0) { /* device no longer present. */
changes++;
/* printk("cciss%d: %s device c%db%dt%dl%d removed.\n",
- ctlr, DEVICETYPE(csd->devtype), hostno,
+ ctlr, scsi_device_type(csd->devtype), hostno,
csd->bus, csd->target, csd->lun); */
- cciss_scsi_remove_entry(ctlr, hostno, i);
- /* note, i not incremented */
- }
- else if (found == 1) { /* device is different kind */
+ cciss_scsi_remove_entry(ctlr, hostno, i,
+ removed, &nremoved);
+ /* remove ^^^, hence i not incremented */
+ } else if (found == 1) { /* device is different in some way */
changes++;
- printk("cciss%d: device c%db%dt%dl%d type changed "
- "(device type now %s).\n",
- ctlr, hostno, csd->bus, csd->target, csd->lun,
- DEVICETYPE(csd->devtype));
+ printk("cciss%d: device c%db%dt%dl%d has changed.\n",
+ ctlr, hostno, csd->bus, csd->target, csd->lun);
+ cciss_scsi_remove_entry(ctlr, hostno, i,
+ removed, &nremoved);
+ /* remove ^^^, hence i not incremented */
+ if (cciss_scsi_add_entry(ctlr, hostno, &sd[j],
+ added, &nadded) != 0)
+ /* we just removed one, so add can't fail. */
+ BUG();
csd->devtype = sd[j].devtype;
- i++; /* so just move along. */
+ memcpy(csd->device_id, sd[j].device_id,
+ sizeof(csd->device_id));
+ memcpy(csd->vendor, sd[j].vendor,
+ sizeof(csd->vendor));
+ memcpy(csd->model, sd[j].model,
+ sizeof(csd->model));
+ memcpy(csd->revision, sd[j].revision,
+ sizeof(csd->revision));
} else /* device is same as it ever was, */
i++; /* so just move along. */
}
csd = &ccissscsi[ctlr].dev[j];
if (SCSI3ADDR_EQ(sd[i].scsi3addr,
csd->scsi3addr)) {
- if (sd[i].devtype == csd->devtype)
+ if (device_is_the_same(&sd[i], csd))
found=2; /* found device */
else
found=1; /* found a bug. */
}
if (!found) {
changes++;
- if (cciss_scsi_add_entry(ctlr, hostno,
- &sd[i].scsi3addr[0], sd[i].devtype) != 0)
+ if (cciss_scsi_add_entry(ctlr, hostno, &sd[i],
+ added, &nadded) != 0)
break;
} else if (found == 1) {
/* should never happen... */
changes++;
- printk("cciss%d: device unexpectedly changed type\n",
- ctlr);
+ printk(KERN_WARNING "cciss%d: device "
+ "unexpectedly changed\n", ctlr);
/* but if it does happen, we just ignore that device */
}
}
CPQ_TAPE_UNLOCK(ctlr, flags);
- if (!changes)
- printk("cciss%d: No device changes detected.\n", ctlr);
+ /* Don't notify scsi mid layer of any changes the first time through */
+ /* (or if there are no changes) scsi_scan_host will do it later the */
+ /* first time through. */
+ if (hostno == -1 || !changes)
+ goto free_and_out;
+
+ /* Notify scsi mid layer of any removed devices */
+ for (i = 0; i < nremoved; i++) {
+ struct scsi_device *sdev =
+ scsi_device_lookup(sh, removed[i].bus,
+ removed[i].target, removed[i].lun);
+ if (sdev != NULL) {
+ scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ } else {
+ /* We don't expect to get here. */
+ /* future cmds to this device will get selection */
+ /* timeout as if the device was gone. */
+ printk(KERN_WARNING "cciss%d: didn't find "
+ "c%db%dt%dl%d\n for removal.",
+ ctlr, hostno, removed[i].bus,
+ removed[i].target, removed[i].lun);
+ }
+ }
+
+ /* Notify scsi mid layer of any added devices */
+ for (i = 0; i < nadded; i++) {
+ int rc;
+ rc = scsi_add_device(sh, added[i].bus,
+ added[i].target, added[i].lun);
+ if (rc == 0)
+ continue;
+ printk(KERN_WARNING "cciss%d: scsi_add_device "
+ "c%db%dt%dl%d failed, device not added.\n",
+ ctlr, hostno,
+ added[i].bus, added[i].target, added[i].lun);
+ /* now we have to remove it from ccissscsi, */
+ /* since it didn't get added to scsi mid layer */
+ fixup_botched_add(ctlr, added[i].scsi3addr);
+ }
+free_and_out:
+ kfree(added);
+ kfree(removed);
return 0;
}
kfree(shba);
shba = NULL;
}
- hba[cntl_num]->scsi_ctlr = (void *) shba;
+ hba[cntl_num]->scsi_ctlr = shba;
return;
}
{
struct scsi_cmnd *cmd;
ctlr_info_t *ctlr;
- u64bit addr64;
ErrorInfo_struct *ei;
ei = cp->err_info;
cmd = (struct scsi_cmnd *) cp->scsi_cmd;
ctlr = hba[cp->ctlr];
- /* undo the DMA mappings */
-
- if (cmd->use_sg) {
- pci_unmap_sg(ctlr->pdev,
- cmd->request_buffer, cmd->use_sg,
- cmd->sc_data_direction);
- }
- else if (cmd->request_bufflen) {
- addr64.val32.lower = cp->SG[0].Addr.lower;
- addr64.val32.upper = cp->SG[0].Addr.upper;
- pci_unmap_single(ctlr->pdev, (dma_addr_t) addr64.val,
- cmd->request_bufflen,
- cmd->sc_data_direction);
- }
+ scsi_dma_unmap(cmd);
+ if (cp->Header.SGTotal > ctlr->max_cmd_sgentries)
+ cciss_unmap_sg_chain_block(ctlr, cp);
cmd->result = (DID_OK << 16); /* host byte */
cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */
ei->SenseLen > SCSI_SENSE_BUFFERSIZE ?
SCSI_SENSE_BUFFERSIZE :
ei->SenseLen);
- cmd->resid = ei->ResidualCnt;
+ scsi_set_resid(cmd, ei->ResidualCnt);
if(ei->CommandStatus != 0)
{ /* an error has occurred */
cp,
ei->ScsiStatus);
#endif
- cmd->result |= (ei->ScsiStatus < 1);
+ cmd->result |= (ei->ScsiStatus << 1);
}
else { /* scsi status is zero??? How??? */
sh->io_port = 0; // good enough? FIXME,
sh->n_io_port = 0; // I don't think we use these two...
sh->this_id = SELF_SCSI_ID;
+ sh->sg_tablesize = hba[ctlr]->maxsgentries;
((struct cciss_scsi_adapter_data_t *)
- hba[ctlr]->scsi_ctlr)->scsi_host = (void *) sh;
+ hba[ctlr]->scsi_ctlr)->scsi_host = sh;
sh->hostdata[0] = (unsigned long) hba[ctlr];
sh->irq = hba[ctlr]->intr[SIMPLE_MODE_INT];
sh->unique_id = sh->irq;
int direction)
{
unsigned long flags;
- DECLARE_COMPLETION(wait);
+ DECLARE_COMPLETION_ONSTACK(wait);
cp->cmd_type = CMD_IOCTL_PEND; // treat this like an ioctl
cp->scsi_cmd = NULL;
static int
cciss_scsi_do_inquiry(ctlr_info_t *c, unsigned char *scsi3addr,
- unsigned char *buf, unsigned char bufsize)
+ unsigned char page, unsigned char *buf,
+ unsigned char bufsize)
{
int rc;
CommandList_struct *cp;
ei = cp->err_info;
cdb[0] = CISS_INQUIRY;
- cdb[1] = 0;
- cdb[2] = 0;
+ cdb[1] = (page != 0);
+ cdb[2] = page;
cdb[3] = 0;
cdb[4] = bufsize;
cdb[5] = 0;
return rc;
}
+/* Get the device id from inquiry page 0x83 */
+static int cciss_scsi_get_device_id(ctlr_info_t *c, unsigned char *scsi3addr,
+ unsigned char *device_id, int buflen)
+{
+ int rc;
+ unsigned char *buf;
+
+ if (buflen > 16)
+ buflen = 16;
+ buf = kzalloc(64, GFP_KERNEL);
+ if (!buf)
+ return -1;
+ rc = cciss_scsi_do_inquiry(c, scsi3addr, 0x83, buf, 64);
+ if (rc == 0)
+ memcpy(device_id, &buf[8], buflen);
+ kfree(buf);
+ return rc != 0;
+}
+
static int
cciss_scsi_do_report_phys_luns(ctlr_info_t *c,
ReportLunData_struct *buf, int bufsize)
ctlr_info_t *c;
__u32 num_luns=0;
unsigned char *ch;
- /* unsigned char found[CCISS_MAX_SCSI_DEVS_PER_HBA]; */
- struct cciss_scsi_dev_t currentsd[CCISS_MAX_SCSI_DEVS_PER_HBA];
+ struct cciss_scsi_dev_t *currentsd, *this_device;
int ncurrent=0;
int reportlunsize = sizeof(*ld_buff) + CISS_MAX_PHYS_LUN * 8;
int i;
c = (ctlr_info_t *) hba[cntl_num];
ld_buff = kzalloc(reportlunsize, GFP_KERNEL);
- if (ld_buff == NULL) {
- printk(KERN_ERR "cciss: out of memory\n");
- return;
- }
inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
- if (inq_buff == NULL) {
- printk(KERN_ERR "cciss: out of memory\n");
- kfree(ld_buff);
- return;
+ currentsd = kzalloc(sizeof(*currentsd) *
+ (CCISS_MAX_SCSI_DEVS_PER_HBA+1), GFP_KERNEL);
+ if (ld_buff == NULL || inq_buff == NULL || currentsd == NULL) {
+ printk(KERN_ERR "cciss: out of memory\n");
+ goto out;
}
-
+ this_device = ¤tsd[CCISS_MAX_SCSI_DEVS_PER_HBA];
if (cciss_scsi_do_report_phys_luns(c, ld_buff, reportlunsize) == 0) {
ch = &ld_buff->LUNListLength[0];
num_luns = ((ch[0]<<24) | (ch[1]<<16) | (ch[2]<<8) | ch[3]) / 8;
/* adjust our table of devices */
- for(i=0; i<num_luns; i++)
- {
- int devtype;
-
+ for (i = 0; i < num_luns; i++) {
/* for each physical lun, do an inquiry */
if (ld_buff->LUN[i][3] & 0xC0) continue;
memset(inq_buff, 0, OBDR_TAPE_INQ_SIZE);
memcpy(&scsi3addr[0], &ld_buff->LUN[i][0], 8);
- if (cciss_scsi_do_inquiry(hba[cntl_num], scsi3addr, inq_buff,
- (unsigned char) OBDR_TAPE_INQ_SIZE) != 0) {
+ if (cciss_scsi_do_inquiry(hba[cntl_num], scsi3addr, 0, inq_buff,
+ (unsigned char) OBDR_TAPE_INQ_SIZE) != 0)
/* Inquiry failed (msg printed already) */
- devtype = 0; /* so we will skip this device. */
- } else /* what kind of device is this? */
- devtype = (inq_buff[0] & 0x1f);
-
- switch (devtype)
+ continue; /* so we will skip this device. */
+
+ this_device->devtype = (inq_buff[0] & 0x1f);
+ this_device->bus = -1;
+ this_device->target = -1;
+ this_device->lun = -1;
+ memcpy(this_device->scsi3addr, scsi3addr, 8);
+ memcpy(this_device->vendor, &inq_buff[8],
+ sizeof(this_device->vendor));
+ memcpy(this_device->model, &inq_buff[16],
+ sizeof(this_device->model));
+ memcpy(this_device->revision, &inq_buff[32],
+ sizeof(this_device->revision));
+ memset(this_device->device_id, 0,
+ sizeof(this_device->device_id));
+ cciss_scsi_get_device_id(hba[cntl_num], scsi3addr,
+ this_device->device_id, sizeof(this_device->device_id));
+
+ switch (this_device->devtype)
{
case 0x05: /* CD-ROM */ {
if (ncurrent >= CCISS_MAX_SCSI_DEVS_PER_HBA) {
printk(KERN_INFO "cciss%d: %s ignored, "
"too many devices.\n", cntl_num,
- DEVICETYPE(devtype));
+ scsi_device_type(this_device->devtype));
break;
}
- memcpy(¤tsd[ncurrent].scsi3addr[0],
- &scsi3addr[0], 8);
- currentsd[ncurrent].devtype = devtype;
- currentsd[ncurrent].bus = -1;
- currentsd[ncurrent].target = -1;
- currentsd[ncurrent].lun = -1;
+ currentsd[ncurrent] = *this_device;
ncurrent++;
break;
default:
out:
kfree(inq_buff);
kfree(ld_buff);
+ kfree(currentsd);
return;
}
dma mapping and fills in the scatter gather entries of the
cciss command, cp. */
-static void
-cciss_scatter_gather(struct pci_dev *pdev,
- CommandList_struct *cp,
- struct scsi_cmnd *cmd)
+static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *cp,
+ struct scsi_cmnd *cmd)
{
- unsigned int use_sg, nsegs=0, len;
- struct scatterlist *scatter = (struct scatterlist *) cmd->request_buffer;
+ unsigned int len;
+ struct scatterlist *sg;
__u64 addr64;
-
- /* is it just one virtual address? */
- if (!cmd->use_sg) {
- if (cmd->request_bufflen) { /* anything to xfer? */
-
- addr64 = (__u64) pci_map_single(pdev,
- cmd->request_buffer,
- cmd->request_bufflen,
- cmd->sc_data_direction);
-
- cp->SG[0].Addr.lower =
- (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF);
- cp->SG[0].Addr.upper =
- (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF);
- cp->SG[0].Len = cmd->request_bufflen;
- nsegs=1;
- }
- } /* else, must be a list of virtual addresses.... */
- else if (cmd->use_sg <= MAXSGENTRIES) { /* not too many addrs? */
-
- use_sg = pci_map_sg(pdev, cmd->request_buffer, cmd->use_sg,
- cmd->sc_data_direction);
-
- for (nsegs=0; nsegs < use_sg; nsegs++) {
- addr64 = (__u64) sg_dma_address(&scatter[nsegs]);
- len = sg_dma_len(&scatter[nsegs]);
- cp->SG[nsegs].Addr.lower =
- (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF);
- cp->SG[nsegs].Addr.upper =
- (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF);
- cp->SG[nsegs].Len = len;
- cp->SG[nsegs].Ext = 0; // we are not chaining
+ int request_nsgs, i, chained, sg_index;
+ struct cciss_scsi_adapter_data_t *sa = h->scsi_ctlr;
+ SGDescriptor_struct *curr_sg;
+
+ BUG_ON(scsi_sg_count(cmd) > h->maxsgentries);
+
+ chained = 0;
+ sg_index = 0;
+ curr_sg = cp->SG;
+ request_nsgs = scsi_dma_map(cmd);
+ if (request_nsgs) {
+ scsi_for_each_sg(cmd, sg, request_nsgs, i) {
+ if (sg_index + 1 == h->max_cmd_sgentries &&
+ !chained && request_nsgs - i > 1) {
+ chained = 1;
+ sg_index = 0;
+ curr_sg = sa->cmd_sg_list[cp->cmdindex];
+ }
+ addr64 = (__u64) sg_dma_address(sg);
+ len = sg_dma_len(sg);
+ curr_sg[sg_index].Addr.lower =
+ (__u32) (addr64 & 0x0FFFFFFFFULL);
+ curr_sg[sg_index].Addr.upper =
+ (__u32) ((addr64 >> 32) & 0x0FFFFFFFFULL);
+ curr_sg[sg_index].Len = len;
+ curr_sg[sg_index].Ext = 0;
+ ++sg_index;
}
- } else BUG();
-
- cp->Header.SGList = (__u8) nsegs; /* no. SGs contig in this cmd */
- cp->Header.SGTotal = (__u16) nsegs; /* total sgs in this cmd list */
+ if (chained)
+ cciss_map_sg_chain_block(h, cp,
+ sa->cmd_sg_list[cp->cmdindex],
+ (request_nsgs - (h->max_cmd_sgentries - 1)) *
+ sizeof(SGDescriptor_struct));
+ }
+ /* track how many SG entries we are using */
+ if (request_nsgs > h->maxSG)
+ h->maxSG = request_nsgs;
+ cp->Header.SGTotal = (__u8) request_nsgs + chained;
+ if (request_nsgs > h->max_cmd_sgentries)
+ cp->Header.SGList = h->max_cmd_sgentries;
+ else
+ cp->Header.SGList = cp->Header.SGTotal;
return;
}
static int
cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
{
- ctlr_info_t **c;
+ ctlr_info_t *c;
int ctlr, rc;
unsigned char scsi3addr[8];
CommandList_struct *cp;
// Get the ptr to our adapter structure (hba[i]) out of cmd->host.
// We violate cmd->host privacy here. (Is there another way?)
- c = (ctlr_info_t **) &cmd->device->host->hostdata[0];
- ctlr = (*c)->ctlr;
+ c = (ctlr_info_t *) cmd->device->host->hostdata[0];
+ ctlr = c->ctlr;
rc = lookup_scsi3addr(ctlr, cmd->device->channel, cmd->device->id,
cmd->device->lun, scsi3addr);
see what the device thinks of it. */
spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- cp = scsi_cmd_alloc(*c);
+ cp = scsi_cmd_alloc(c);
spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
if (cp == NULL) { /* trouble... */
printk("scsi_cmd_alloc returned NULL!\n");
BUG();
break;
}
-
- cciss_scatter_gather((*c)->pdev, cp, cmd); // Fill the SG list
+ cciss_scatter_gather(c, cp, cmd);
/* Put the request on the tail of the request queue */
spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- addQ(&(*c)->reqQ, cp);
- (*c)->Qdepth++;
- start_io(*c);
+ addQ(&c->reqQ, cp);
+ c->Qdepth++;
+ start_io(c);
spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
/* the cmd'll come back via intr handler in complete_scsi_command() */
/* we are being forcibly unloaded, and may not refuse. */
spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- sa = (struct cciss_scsi_adapter_data_t *) hba[ctlr]->scsi_ctlr;
+ sa = hba[ctlr]->scsi_ctlr;
stk = &sa->cmd_stack;
/* if we weren't ever actually registered, don't unregister */
/* set scsi_host to NULL so our detect routine will
find us on register */
sa->scsi_host = NULL;
+ spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
scsi_cmd_stack_free(ctlr);
kfree(sa);
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
-}
-
-static int
-cciss_register_scsi(int ctlr)
-{
- unsigned long flags;
-
- CPQ_TAPE_LOCK(ctlr, flags);
-
- /* Since this is really a block driver, the SCSI core may not be
- initialized at init time, in which case, calling scsi_register_host
- would hang. Instead, we do it later, via /proc filesystem
- and rc scripts, when we know SCSI core is good to go. */
-
- /* Only register if SCSI devices are detected. */
- if (ccissscsi[ctlr].ndevices != 0) {
- ((struct cciss_scsi_adapter_data_t *)
- hba[ctlr]->scsi_ctlr)->registered = 1;
- CPQ_TAPE_UNLOCK(ctlr, flags);
- return cciss_scsi_detect(ctlr);
- }
- CPQ_TAPE_UNLOCK(ctlr, flags);
- printk(KERN_INFO
- "cciss%d: No appropriate SCSI device detected, "
- "SCSI subsystem not engaged.\n", ctlr);
- return 0;
}
static int
unsigned long flags;
spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- sa = (struct cciss_scsi_adapter_data_t *) hba[ctlr]->scsi_ctlr;
+ sa = hba[ctlr]->scsi_ctlr;
stk = &sa->cmd_stack;
- if (((struct cciss_scsi_adapter_data_t *)
- hba[ctlr]->scsi_ctlr)->registered) {
+ if (sa->registered) {
printk("cciss%d: SCSI subsystem already engaged.\n", ctlr);
spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- return ENXIO;
+ return -ENXIO;
}
+ sa->registered = 1;
spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
cciss_update_non_disk_devices(ctlr, -1);
- cciss_register_scsi(ctlr);
+ cciss_scsi_detect(ctlr);
return 0;
}
static void
-cciss_proc_tape_report(int ctlr, unsigned char *buffer, off_t *pos, off_t *len)
+cciss_seq_tape_report(struct seq_file *seq, int ctlr)
{
unsigned long flags;
- int size;
-
- *pos = *pos -1; *len = *len - 1; // cut off the last trailing newline
CPQ_TAPE_LOCK(ctlr, flags);
- size = sprintf(buffer + *len,
+ seq_printf(seq,
"Sequential access devices: %d\n\n",
ccissscsi[ctlr].ndevices);
CPQ_TAPE_UNLOCK(ctlr, flags);
- *pos += size; *len += size;
+}
+
+static int wait_for_device_to_become_ready(ctlr_info_t *h,
+ unsigned char lunaddr[])
+{
+ int rc;
+ int count = 0;
+ int waittime = HZ;
+ CommandList_struct *c;
+
+ c = cmd_alloc(h, 1);
+ if (!c) {
+ printk(KERN_WARNING "cciss%d: out of memory in "
+ "wait_for_device_to_become_ready.\n", h->ctlr);
+ return IO_ERROR;
+ }
+
+ /* Send test unit ready until device ready, or give up. */
+ while (count < 20) {
+
+ /* Wait for a bit. do this first, because if we send
+ * the TUR right away, the reset will just abort it.
+ */
+ schedule_timeout_uninterruptible(waittime);
+ count++;
+
+ /* Increase wait time with each try, up to a point. */
+ if (waittime < (HZ * 30))
+ waittime = waittime * 2;
+
+ /* Send the Test Unit Ready */
+ rc = fill_cmd(c, TEST_UNIT_READY, h->ctlr, NULL, 0, 0,
+ lunaddr, TYPE_CMD);
+ if (rc == 0)
+ rc = sendcmd_withirq_core(h, c, 0);
+
+ (void) process_sendcmd_error(h, c);
+
+ if (rc != 0)
+ goto retry_tur;
+
+ if (c->err_info->CommandStatus == CMD_SUCCESS)
+ break;
+
+ if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
+ c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION) {
+ if (c->err_info->SenseInfo[2] == NO_SENSE)
+ break;
+ if (c->err_info->SenseInfo[2] == UNIT_ATTENTION) {
+ unsigned char asc;
+ asc = c->err_info->SenseInfo[12];
+ check_for_unit_attention(h, c);
+ if (asc == POWER_OR_RESET)
+ break;
+ }
+ }
+retry_tur:
+ printk(KERN_WARNING "cciss%d: Waiting %d secs "
+ "for device to become ready.\n",
+ h->ctlr, waittime / HZ);
+ rc = 1; /* device not ready. */
+ }
+
+ if (rc)
+ printk("cciss%d: giving up on device.\n", h->ctlr);
+ else
+ printk(KERN_WARNING "cciss%d: device is ready.\n", h->ctlr);
+
+ cmd_free(h, c, 1);
+ return rc;
}
/* Need at least one of these error handlers to keep ../scsi/hosts.c from
{
int rc;
CommandList_struct *cmd_in_trouble;
- ctlr_info_t **c;
+ unsigned char lunaddr[8];
+ ctlr_info_t *c;
int ctlr;
/* find the controller to which the command to be aborted was sent */
- c = (ctlr_info_t **) &scsicmd->device->host->hostdata[0];
+ c = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
if (c == NULL) /* paranoia */
return FAILED;
- ctlr = (*c)->ctlr;
+ ctlr = c->ctlr;
printk(KERN_WARNING "cciss%d: resetting tape drive or medium changer.\n", ctlr);
-
/* find the command that's giving us trouble */
cmd_in_trouble = (CommandList_struct *) scsicmd->host_scribble;
- if (cmd_in_trouble == NULL) { /* paranoia */
+ if (cmd_in_trouble == NULL) /* paranoia */
return FAILED;
- }
+ memcpy(lunaddr, &cmd_in_trouble->Header.LUN.LunAddrBytes[0], 8);
/* send a reset to the SCSI LUN which the command was sent to */
- rc = sendcmd(CCISS_RESET_MSG, ctlr, NULL, 0, 2, 0, 0,
- (unsigned char *) &cmd_in_trouble->Header.LUN.LunAddrBytes[0],
+ rc = sendcmd_withirq(CCISS_RESET_MSG, ctlr, NULL, 0, 0, lunaddr,
TYPE_MSG);
- /* sendcmd turned off interrputs on the board, turn 'em back on. */
- (*c)->access.set_intr_mask(*c, CCISS_INTR_ON);
- if (rc == 0)
+ if (rc == 0 && wait_for_device_to_become_ready(c, lunaddr) == 0)
return SUCCESS;
printk(KERN_WARNING "cciss%d: resetting device failed.\n", ctlr);
return FAILED;
{
int rc;
CommandList_struct *cmd_to_abort;
- ctlr_info_t **c;
+ unsigned char lunaddr[8];
+ ctlr_info_t *c;
int ctlr;
/* find the controller to which the command to be aborted was sent */
- c = (ctlr_info_t **) &scsicmd->device->host->hostdata[0];
+ c = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
if (c == NULL) /* paranoia */
return FAILED;
- ctlr = (*c)->ctlr;
+ ctlr = c->ctlr;
printk(KERN_WARNING "cciss%d: aborting tardy SCSI cmd\n", ctlr);
/* find the command to be aborted */
cmd_to_abort = (CommandList_struct *) scsicmd->host_scribble;
if (cmd_to_abort == NULL) /* paranoia */
return FAILED;
- rc = sendcmd(CCISS_ABORT_MSG, ctlr, &cmd_to_abort->Header.Tag,
- 0, 2, 0, 0,
- (unsigned char *) &cmd_to_abort->Header.LUN.LunAddrBytes[0],
- TYPE_MSG);
- /* sendcmd turned off interrputs on the board, turn 'em back on. */
- (*c)->access.set_intr_mask(*c, CCISS_INTR_ON);
+ memcpy(lunaddr, &cmd_to_abort->Header.LUN.LunAddrBytes[0], 8);
+ rc = sendcmd_withirq(CCISS_ABORT_MSG, ctlr, &cmd_to_abort->Header.Tag,
+ 0, 0, lunaddr, TYPE_MSG);
if (rc == 0)
return SUCCESS;
return FAILED;
/* If no tape support, then these become defined out of existence */
#define cciss_scsi_setup(cntl_num)
-#define cciss_unregister_scsi(ctlr)
-#define cciss_register_scsi(ctlr)
-#define cciss_proc_tape_report(ctlr, buffer, pos, len)
#endif /* CONFIG_CISS_SCSI_TAPE */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff