/*
- * Disk Array driver for HP SA 5xxx and 6xxx Controllers
- * Copyright 2000, 2006 Hewlett-Packard Development Company, L.P.
+ * Disk Array driver for HP Smart Array controllers.
+ * (C) Copyright 2000, 2007 Hewlett-Packard Development Company, L.P.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more details.
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA.
*
* Questions/Comments/Bugfixes to iss_storagedev@hp.com
*
*/
-#include <linux/config.h> /* CONFIG_PROC_FS */
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/blkpg.h>
#include <linux/timer.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/hdreg.h>
#include <linux/spinlock.h>
#include <linux/blkdev.h>
#include <linux/genhd.h>
#include <linux/completion.h>
+#include <scsi/scsi.h>
+#include <scsi/sg.h>
+#include <scsi/scsi_ioctl.h>
+#include <linux/cdrom.h>
+#include <linux/scatterlist.h>
#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
-#define DRIVER_NAME "HP CISS Driver (v 3.6.10)"
-#define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,10)
+#define DRIVER_NAME "HP CISS Driver (v 3.6.20)"
+#define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 20)
/* Embedded module documentation macros - see modules.h */
MODULE_AUTHOR("Hewlett-Packard Company");
-MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.10");
+MODULE_DESCRIPTION("Driver for HP Smart Array Controllers");
MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
- " SA6i P600 P800 P400 P400i E200 E200i E500");
+ " SA6i P600 P800 P400 P400i E200 E200i E500 P700m"
+ " Smart Array G2 Series SAS/SATA Controllers");
+MODULE_VERSION("3.6.20");
MODULE_LICENSE("GPL");
#include "cciss_cmd.h"
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3213},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3214},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3233},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3237},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249},
+ {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
};
{0x3213103C, "Smart Array E200i", &SA5_access},
{0x3214103C, "Smart Array E200i", &SA5_access},
{0x3215103C, "Smart Array E200i", &SA5_access},
- {0x3233103C, "Smart Array E500", &SA5_access},
+ {0x3237103C, "Smart Array E500", &SA5_access},
+ {0x323D103C, "Smart Array P700m", &SA5_access},
+ {0x3241103C, "Smart Array P212", &SA5_access},
+ {0x3243103C, "Smart Array P410", &SA5_access},
+ {0x3245103C, "Smart Array P410i", &SA5_access},
+ {0x3247103C, "Smart Array P411", &SA5_access},
+ {0x3249103C, "Smart Array P812", &SA5_access},
+ {0xFFFF103C, "Unknown Smart Array", &SA5_access},
};
/* How long to wait (in milliseconds) for board to go into simple mode */
/*define how many times we will try a command because of bus resets */
#define MAX_CMD_RETRIES 3
-#define READ_AHEAD 1024
-#define NR_CMDS 384 /* #commands that can be outstanding */
#define MAX_CTLR 32
/* Originally cciss driver only supports 8 major numbers */
static ctlr_info_t *hba[MAX_CTLR];
-static void do_cciss_request(request_queue_t *q);
-static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs);
+static void do_cciss_request(struct request_queue *q);
+static irqreturn_t do_cciss_intr(int irq, void *dev_id);
static int cciss_open(struct inode *inode, struct file *filep);
static int cciss_release(struct inode *inode, struct file *filep);
static int cciss_ioctl(struct inode *inode, struct file *filep,
unsigned int cmd, unsigned long arg);
static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
-static int revalidate_allvol(ctlr_info_t *host);
static int cciss_revalidate(struct gendisk *disk);
static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk);
static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
static void fail_all_cmds(unsigned long ctlr);
#ifdef CONFIG_PROC_FS
-static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
- int length, int *eof, void *data);
static void cciss_procinit(int i);
#else
static void cciss_procinit(int i)
#include "cciss_scsi.c" /* For SCSI tape support */
+#define RAID_UNKNOWN 6
+
#ifdef CONFIG_PROC_FS
/*
*/
#define ENG_GIG 1000000000
#define ENG_GIG_FACTOR (ENG_GIG/512)
-#define RAID_UNKNOWN 6
+#define ENGAGE_SCSI "engage scsi"
static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
"UNKNOWN"
};
static struct proc_dir_entry *proc_cciss;
-static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
- int length, int *eof, void *data)
+static void cciss_seq_show_header(struct seq_file *seq)
{
- off_t pos = 0;
- off_t len = 0;
- int size, i, ctlr;
- ctlr_info_t *h = (ctlr_info_t *) data;
- drive_info_struct *drv;
- unsigned long flags;
- sector_t vol_sz, vol_sz_frac;
+ ctlr_info_t *h = seq->private;
+
+ seq_printf(seq, "%s: HP %s Controller\n"
+ "Board ID: 0x%08lx\n"
+ "Firmware Version: %c%c%c%c\n"
+ "IRQ: %d\n"
+ "Logical drives: %d\n"
+ "Current Q depth: %d\n"
+ "Current # commands on controller: %d\n"
+ "Max Q depth since init: %d\n"
+ "Max # commands on controller since init: %d\n"
+ "Max SG entries since init: %d\n",
+ h->devname,
+ h->product_name,
+ (unsigned long)h->board_id,
+ h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
+ h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT],
+ h->num_luns,
+ h->Qdepth, h->commands_outstanding,
+ h->maxQsinceinit, h->max_outstanding, h->maxSG);
- ctlr = h->ctlr;
+#ifdef CONFIG_CISS_SCSI_TAPE
+ cciss_seq_tape_report(seq, h->ctlr);
+#endif /* CONFIG_CISS_SCSI_TAPE */
+}
+
+static void *cciss_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ ctlr_info_t *h = seq->private;
+ unsigned ctlr = h->ctlr;
+ unsigned long flags;
/* prevent displaying bogus info during configuration
* or deconfiguration of a logical volume
spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
if (h->busy_configuring) {
spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- return -EBUSY;
+ return ERR_PTR(-EBUSY);
}
h->busy_configuring = 1;
spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- size = sprintf(buffer, "%s: HP %s Controller\n"
- "Board ID: 0x%08lx\n"
- "Firmware Version: %c%c%c%c\n"
- "IRQ: %d\n"
- "Logical drives: %d\n"
- "Current Q depth: %d\n"
- "Current # commands on controller: %d\n"
- "Max Q depth since init: %d\n"
- "Max # commands on controller since init: %d\n"
- "Max SG entries since init: %d\n\n",
- h->devname,
- h->product_name,
- (unsigned long)h->board_id,
- h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
- h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT],
- h->num_luns, h->Qdepth, h->commands_outstanding,
- h->maxQsinceinit, h->max_outstanding, h->maxSG);
-
- pos += size;
- len += size;
- cciss_proc_tape_report(ctlr, buffer, &pos, &len);
- for (i = 0; i <= h->highest_lun; i++) {
-
- drv = &h->drv[i];
- if (drv->heads == 0)
- continue;
+ if (*pos == 0)
+ cciss_seq_show_header(seq);
- vol_sz = drv->nr_blocks;
- vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR);
- vol_sz_frac *= 100;
- sector_div(vol_sz_frac, ENG_GIG_FACTOR);
+ return pos;
+}
+
+static int cciss_seq_show(struct seq_file *seq, void *v)
+{
+ sector_t vol_sz, vol_sz_frac;
+ ctlr_info_t *h = seq->private;
+ unsigned ctlr = h->ctlr;
+ loff_t *pos = v;
+ drive_info_struct *drv = &h->drv[*pos];
+
+ if (*pos > h->highest_lun)
+ return 0;
+
+ if (drv->heads == 0)
+ return 0;
+
+ vol_sz = drv->nr_blocks;
+ vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR);
+ vol_sz_frac *= 100;
+ sector_div(vol_sz_frac, ENG_GIG_FACTOR);
+
+ if (drv->raid_level > 5)
+ drv->raid_level = RAID_UNKNOWN;
+ seq_printf(seq, "cciss/c%dd%d:"
+ "\t%4u.%02uGB\tRAID %s\n",
+ ctlr, (int) *pos, (int)vol_sz, (int)vol_sz_frac,
+ raid_label[drv->raid_level]);
+ return 0;
+}
+
+static void *cciss_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ ctlr_info_t *h = seq->private;
+
+ if (*pos > h->highest_lun)
+ return NULL;
+ *pos += 1;
+
+ return pos;
+}
+
+static void cciss_seq_stop(struct seq_file *seq, void *v)
+{
+ ctlr_info_t *h = seq->private;
+
+ /* Only reset h->busy_configuring if we succeeded in setting
+ * it during cciss_seq_start. */
+ if (v == ERR_PTR(-EBUSY))
+ return;
- if (drv->raid_level > 5)
- drv->raid_level = RAID_UNKNOWN;
- size = sprintf(buffer + len, "cciss/c%dd%d:"
- "\t%4u.%02uGB\tRAID %s\n",
- ctlr, i, (int)vol_sz, (int)vol_sz_frac,
- raid_label[drv->raid_level]);
- pos += size;
- len += size;
- }
-
- *eof = 1;
- *start = buffer + offset;
- len -= offset;
- if (len > length)
- len = length;
h->busy_configuring = 0;
- return len;
}
-static int
-cciss_proc_write(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+static struct seq_operations cciss_seq_ops = {
+ .start = cciss_seq_start,
+ .show = cciss_seq_show,
+ .next = cciss_seq_next,
+ .stop = cciss_seq_stop,
+};
+
+static int cciss_seq_open(struct inode *inode, struct file *file)
{
- unsigned char cmd[80];
- int len;
-#ifdef CONFIG_CISS_SCSI_TAPE
- ctlr_info_t *h = (ctlr_info_t *) data;
- int rc;
+ int ret = seq_open(file, &cciss_seq_ops);
+ struct seq_file *seq = file->private_data;
+
+ if (!ret)
+ seq->private = PDE(inode)->data;
+
+ return ret;
+}
+
+static ssize_t
+cciss_proc_write(struct file *file, const char __user *buf,
+ size_t length, loff_t *ppos)
+{
+ int err;
+ char *buffer;
+
+#ifndef CONFIG_CISS_SCSI_TAPE
+ return -EINVAL;
#endif
- if (count > sizeof(cmd) - 1)
+ if (!buf || length > PAGE_SIZE - 1)
return -EINVAL;
- if (copy_from_user(cmd, buffer, count))
- return -EFAULT;
- cmd[count] = '\0';
- len = strlen(cmd); // above 3 lines ensure safety
- if (len && cmd[len - 1] == '\n')
- cmd[--len] = '\0';
-# ifdef CONFIG_CISS_SCSI_TAPE
- if (strcmp("engage scsi", cmd) == 0) {
+
+ buffer = (char *)__get_free_page(GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ err = -EFAULT;
+ if (copy_from_user(buffer, buf, length))
+ goto out;
+ buffer[length] = '\0';
+
+#ifdef CONFIG_CISS_SCSI_TAPE
+ if (strncmp(ENGAGE_SCSI, buffer, sizeof ENGAGE_SCSI - 1) == 0) {
+ struct seq_file *seq = file->private_data;
+ ctlr_info_t *h = seq->private;
+ int rc;
+
rc = cciss_engage_scsi(h->ctlr);
if (rc != 0)
- return -rc;
- return count;
- }
+ err = -rc;
+ else
+ err = length;
+ } else
+#endif /* CONFIG_CISS_SCSI_TAPE */
+ err = -EINVAL;
/* might be nice to have "disengage" too, but it's not
safely possible. (only 1 module use count, lock issues.) */
-# endif
- return -EINVAL;
+
+out:
+ free_page((unsigned long)buffer);
+ return err;
}
-/*
- * Get us a file in /proc/cciss that says something about each controller.
- * Create /proc/cciss if it doesn't exist yet.
- */
+static struct file_operations cciss_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = cciss_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+ .write = cciss_proc_write,
+};
+
static void __devinit cciss_procinit(int i)
{
struct proc_dir_entry *pde;
- if (proc_cciss == NULL) {
- proc_cciss = proc_mkdir("cciss", proc_root_driver);
- if (!proc_cciss)
- return;
- }
-
- pde = create_proc_read_entry(hba[i]->devname,
- S_IWUSR | S_IRUSR | S_IRGRP | S_IROTH,
- proc_cciss, cciss_proc_get_info, hba[i]);
- pde->write_proc = cciss_proc_write;
+ if (proc_cciss == NULL)
+ proc_cciss = proc_mkdir("driver/cciss", NULL);
+ if (!proc_cciss)
+ return;
+ pde = proc_create_data(hba[i]->devname, S_IWUSR | S_IRUSR | S_IRGRP |
+ S_IROTH, proc_cciss,
+ &cciss_proc_fops, hba[i]);
}
#endif /* CONFIG_PROC_FS */
} else { /* get it out of the controllers pool */
do {
- i = find_first_zero_bit(h->cmd_pool_bits, NR_CMDS);
- if (i == NR_CMDS)
+ i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds);
+ if (i == h->nr_cmds)
return NULL;
} while (test_and_set_bit
(i & (BITS_PER_LONG - 1),
* but I'm already using way to many device nodes to claim another one
* for "raw controller".
*/
- if (drv->nr_blocks == 0) {
+ if (drv->heads == 0) {
if (iminor(inode) != 0) { /* not node 0? */
/* if not node 0 make sure it is a partition = 0 */
if (iminor(inode) & 0x0f) {
{
int ret;
lock_kernel();
- ret = cciss_ioctl(f->f_dentry->d_inode, f, cmd, arg);
+ ret = cciss_ioctl(f->f_path.dentry->d_inode, f, cmd, arg);
unlock_kernel();
return ret;
}
}
case CCISS_REVALIDVOLS:
- if (bdev != bdev->bd_contains || drv != host->drv)
- return -ENXIO;
- return revalidate_allvol(host);
+ return rebuild_lun_table(host, NULL);
case CCISS_GETLUNINFO:{
LogvolInfo_struct luninfo;
status = -ENOMEM;
goto cleanup1;
}
- buff_size = (int *)kmalloc(MAXSGENTRIES * sizeof(int),
+ buff_size = kmalloc(MAXSGENTRIES * sizeof(int),
GFP_KERNEL);
if (!buff_size) {
status = -ENOMEM;
kfree(ioc);
return status;
}
+
+ /* scsi_cmd_ioctl handles these, below, though some are not */
+ /* very meaningful for cciss. SG_IO is the main one people want. */
+
+ case SG_GET_VERSION_NUM:
+ case SG_SET_TIMEOUT:
+ case SG_GET_TIMEOUT:
+ case SG_GET_RESERVED_SIZE:
+ case SG_SET_RESERVED_SIZE:
+ case SG_EMULATED_HOST:
+ case SG_IO:
+ case SCSI_IOCTL_SEND_COMMAND:
+ return scsi_cmd_ioctl(filep, disk->queue, disk, cmd, argp);
+
+ /* scsi_cmd_ioctl would normally handle these, below, but */
+ /* they aren't a good fit for cciss, as CD-ROMs are */
+ /* not supported, and we don't have any bus/target/lun */
+ /* which we present to the kernel. */
+
+ case CDROM_SEND_PACKET:
+ case CDROMCLOSETRAY:
+ case CDROMEJECT:
+ case SCSI_IOCTL_GET_IDLUN:
+ case SCSI_IOCTL_GET_BUS_NUMBER:
default:
return -ENOTTY;
}
}
-/*
- * revalidate_allvol is for online array config utilities. After a
- * utility reconfigures the drives in the array, it can use this function
- * (through an ioctl) to make the driver zap any previous disk structs for
- * that controller and get new ones.
- *
- * Right now I'm using the getgeometry() function to do this, but this
- * function should probably be finer grained and allow you to revalidate one
- * particular logical volume (instead of all of them on a particular
- * controller).
- */
-static int revalidate_allvol(ctlr_info_t *host)
-{
- int ctlr = host->ctlr, i;
- unsigned long flags;
-
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- if (host->usage_count > 1) {
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- printk(KERN_WARNING "cciss: Device busy for volume"
- " revalidation (usage=%d)\n", host->usage_count);
- return -EBUSY;
- }
- host->usage_count++;
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
-
- for (i = 0; i < NWD; i++) {
- struct gendisk *disk = host->gendisk[i];
- if (disk) {
- request_queue_t *q = disk->queue;
-
- if (disk->flags & GENHD_FL_UP)
- del_gendisk(disk);
- if (q)
- blk_cleanup_queue(q);
- }
- }
-
- /*
- * Set the partition and block size structures for all volumes
- * on this controller to zero. We will reread all of this data
- */
- memset(host->drv, 0, sizeof(drive_info_struct)
- * CISS_MAX_LUN);
- /*
- * Tell the array controller not to give us any interrupts while
- * we check the new geometry. Then turn interrupts back on when
- * we're done.
- */
- host->access.set_intr_mask(host, CCISS_INTR_OFF);
- cciss_getgeometry(ctlr);
- host->access.set_intr_mask(host, CCISS_INTR_ON);
-
- /* Loop through each real device */
- for (i = 0; i < NWD; i++) {
- struct gendisk *disk = host->gendisk[i];
- drive_info_struct *drv = &(host->drv[i]);
- /* we must register the controller even if no disks exist */
- /* this is for the online array utilities */
- if (!drv->heads && i)
- continue;
- blk_queue_hardsect_size(drv->queue, drv->block_size);
- set_capacity(disk, drv->nr_blocks);
- add_disk(disk);
- }
- host->usage_count--;
- return 0;
-}
-
-static inline void complete_buffers(struct bio *bio, int status)
-{
- while (bio) {
- struct bio *xbh = bio->bi_next;
- int nr_sectors = bio_sectors(bio);
-
- bio->bi_next = NULL;
- bio_endio(bio, nr_sectors << 9, status ? 0 : -EIO);
- bio = xbh;
- }
-}
-
static void cciss_check_queues(ctlr_info_t *h)
{
int start_queue = h->next_to_run;
* in case the interrupt we serviced was from an ioctl and did not
* free any new commands.
*/
- if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS)
+ if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds)
return;
/* We have room on the queue for more commands. Now we need to queue
/* check to see if we have maxed out the number of commands
* that can be placed on the queue.
*/
- if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS) {
+ if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds) {
if (curr_queue == start_queue) {
h->next_to_run =
(start_queue + 1) % (h->highest_lun + 1);
pci_unmap_page(h->pdev, temp64.val, cmd->SG[i].Len, ddir);
}
- complete_buffers(rq->bio, rq->errors);
-
#ifdef CCISS_DEBUG
printk("Done with %p\n", rq);
#endif /* CCISS_DEBUG */
- add_disk_randomness(rq->rq_disk);
+ if (blk_end_request(rq, (rq->errors == 0) ? 0 : -EIO, blk_rq_bytes(rq)))
+ BUG();
+
spin_lock_irqsave(&h->lock, flags);
- end_that_request_last(rq, rq->errors);
cmd_free(h, cmd, 1);
cciss_check_queues(h);
spin_unlock_irqrestore(&h->lock, flags);
spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
h->drv[drv_index].busy_configuring = 1;
spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+
+ /* deregister_disk sets h->drv[drv_index].queue = NULL */
+ /* which keeps the interrupt handler from starting */
+ /* the queue. */
ret = deregister_disk(h->gendisk[drv_index],
&h->drv[drv_index], 0);
h->drv[drv_index].busy_configuring = 0;
if (inq_buff == NULL)
goto mem_msg;
+ /* testing to see if 16-byte CDBs are already being used */
+ if (h->cciss_read == CCISS_READ_16) {
+ cciss_read_capacity_16(h->ctlr, drv_index, 1,
+ &total_size, &block_size);
+ goto geo_inq;
+ }
+
cciss_read_capacity(ctlr, drv_index, 1,
&total_size, &block_size);
- /* total size = last LBA + 1 */
- /* FFFFFFFF + 1 = 0, cannot have a logical volume of size 0 */
- /* so we assume this volume this must be >2TB in size */
- if (total_size == (__u32) 0) {
+ /* if read_capacity returns all F's this volume is >2TB in size */
+ /* so we switch to 16-byte CDB's for all read/write ops */
+ if (total_size == 0xFFFFFFFFULL) {
cciss_read_capacity_16(ctlr, drv_index, 1,
&total_size, &block_size);
h->cciss_read = CCISS_READ_16;
h->cciss_read = CCISS_READ_10;
h->cciss_write = CCISS_WRITE_10;
}
+geo_inq:
cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
inq_buff, &h->drv[drv_index]);
/* if it's the controller it's already added */
if (drv_index) {
disk->queue = blk_init_queue(do_cciss_request, &h->lock);
+ sprintf(disk->disk_name, "cciss/c%dd%d", ctlr, drv_index);
+ disk->major = h->major;
+ disk->first_minor = drv_index << NWD_SHIFT;
+ disk->fops = &cciss_fops;
+ disk->private_data = &h->drv[drv_index];
/* Set up queue information */
- disk->queue->backing_dev_info.ra_pages = READ_AHEAD;
blk_queue_bounce_limit(disk->queue, hba[ctlr]->pdev->dma_mask);
/* This is a hardware imposed limit. */
/* This is a limit in the driver and could be eliminated. */
blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES);
- blk_queue_max_sectors(disk->queue, 512);
+ blk_queue_max_sectors(disk->queue, h->cciss_max_sectors);
blk_queue_softirq_done(disk->queue, cciss_softirq_done);
blk_queue_hardsect_size(disk->queue,
hba[ctlr]->drv[drv_index].block_size);
+ /* Make sure all queue data is written out before */
+ /* setting h->drv[drv_index].queue, as setting this */
+ /* allows the interrupt handler to start the queue */
+ wmb();
h->drv[drv_index].queue = disk->queue;
add_disk(disk);
}
/* Set busy_configuring flag for this operation */
spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
- if (h->num_luns >= CISS_MAX_LUN) {
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
- return -EINVAL;
- }
-
if (h->busy_configuring) {
spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
return -EBUSY;
0, 0, TYPE_CMD);
if (return_code == IO_OK) {
- listlength |=
- (0xff & (unsigned int)(ld_buff->LUNListLength[0]))
- << 24;
- listlength |=
- (0xff & (unsigned int)(ld_buff->LUNListLength[1]))
- << 16;
- listlength |=
- (0xff & (unsigned int)(ld_buff->LUNListLength[2]))
- << 8;
- listlength |=
- 0xff & (unsigned int)(ld_buff->LUNListLength[3]);
+ listlength =
+ be32_to_cpu(*(__be32 *) ld_buff->LUNListLength);
} else { /* reading number of logical volumes failed */
printk(KERN_WARNING "cciss: report logical volume"
" command failed\n");
if (drv_index == -1)
goto freeret;
+ /*Check if the gendisk needs to be allocated */
+ if (!h->gendisk[drv_index]){
+ h->gendisk[drv_index] = alloc_disk(1 << NWD_SHIFT);
+ if (!h->gendisk[drv_index]){
+ printk(KERN_ERR "cciss: could not allocate new disk %d\n", drv_index);
+ goto mem_msg;
+ }
+ }
}
h->drv[drv_index].LunID = lunid;
cciss_update_drive_info(ctlr, drv_index);
static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
int clear_all)
{
+ int i;
ctlr_info_t *h = get_host(disk);
if (!capable(CAP_SYS_RAWIO))
* allows us to delete disk zero but keep the controller registered.
*/
if (h->gendisk[0] != disk) {
- if (disk) {
- request_queue_t *q = disk->queue;
- if (disk->flags & GENHD_FL_UP)
- del_gendisk(disk);
- if (q) {
- blk_cleanup_queue(q);
- drv->queue = NULL;
+ struct request_queue *q = disk->queue;
+ if (disk->flags & GENHD_FL_UP)
+ del_gendisk(disk);
+ if (q) {
+ blk_cleanup_queue(q);
+ /* Set drv->queue to NULL so that we do not try
+ * to call blk_start_queue on this queue in the
+ * interrupt handler
+ */
+ drv->queue = NULL;
+ }
+ /* If clear_all is set then we are deleting the logical
+ * drive, not just refreshing its info. For drives
+ * other than disk 0 we will call put_disk. We do not
+ * do this for disk 0 as we need it to be able to
+ * configure the controller.
+ */
+ if (clear_all){
+ /* This isn't pretty, but we need to find the
+ * disk in our array and NULL our the pointer.
+ * This is so that we will call alloc_disk if
+ * this index is used again later.
+ */
+ for (i=0; i < CISS_MAX_LUN; i++){
+ if(h->gendisk[i] == disk){
+ h->gendisk[i] = NULL;
+ break;
+ }
}
+ put_disk(disk);
}
+ } else {
+ set_capacity(disk, 0);
}
--h->num_luns;
{
int return_code;
unsigned long t;
- unsigned long rem;
memset(inq_buff, 0, sizeof(InquiryData_struct));
if (withirq)
printk(KERN_WARNING
"cciss: reading geometry failed, volume "
"does not support reading geometry\n");
- drv->block_size = block_size;
- drv->nr_blocks = total_size;
drv->heads = 255;
drv->sectors = 32; // Sectors per track
- t = drv->heads * drv->sectors;
- drv->cylinders = total_size;
- rem = do_div(drv->cylinders, t);
+ drv->cylinders = total_size + 1;
+ drv->raid_level = RAID_UNKNOWN;
} else {
- drv->block_size = block_size;
- drv->nr_blocks = total_size;
drv->heads = inq_buff->data_byte[6];
drv->sectors = inq_buff->data_byte[7];
drv->cylinders = (inq_buff->data_byte[4] & 0xff) << 8;
drv->cylinders += inq_buff->data_byte[5];
drv->raid_level = inq_buff->data_byte[8];
- t = drv->heads * drv->sectors;
- if (t > 1) {
- drv->cylinders = total_size;
- rem = do_div(drv->cylinders, t);
- }
+ }
+ drv->block_size = block_size;
+ drv->nr_blocks = total_size + 1;
+ t = drv->heads * drv->sectors;
+ if (t > 1) {
+ sector_t real_size = total_size + 1;
+ unsigned long rem = sector_div(real_size, t);
+ if (rem)
+ real_size++;
+ drv->cylinders = real_size;
}
} else { /* Get geometry failed */
printk(KERN_WARNING "cciss: reading geometry failed\n");
{
ReadCapdata_struct *buf;
int return_code;
- buf = kmalloc(sizeof(ReadCapdata_struct), GFP_KERNEL);
- if (buf == NULL) {
+
+ buf = kzalloc(sizeof(ReadCapdata_struct), GFP_KERNEL);
+ if (!buf) {
printk(KERN_WARNING "cciss: out of memory\n");
return;
}
- memset(buf, 0, sizeof(ReadCapdata_struct));
+
if (withirq)
return_code = sendcmd_withirq(CCISS_READ_CAPACITY,
ctlr, buf, sizeof(ReadCapdata_struct),
ctlr, buf, sizeof(ReadCapdata_struct),
1, logvol, 0, NULL, TYPE_CMD);
if (return_code == IO_OK) {
- *total_size = be32_to_cpu(*(__u32 *) buf->total_size)+1;
- *block_size = be32_to_cpu(*(__u32 *) buf->block_size);
+ *total_size = be32_to_cpu(*(__be32 *) buf->total_size);
+ *block_size = be32_to_cpu(*(__be32 *) buf->block_size);
} else { /* read capacity command failed */
printk(KERN_WARNING "cciss: read capacity failed\n");
*total_size = 0;
*block_size = BLOCK_SIZE;
}
- if (*total_size != (__u32) 0)
- printk(KERN_INFO " blocks= %lld block_size= %d\n",
- *total_size, *block_size);
+ if (*total_size != 0)
+ printk(KERN_INFO " blocks= %llu block_size= %d\n",
+ (unsigned long long)*total_size+1, *block_size);
kfree(buf);
- return;
}
static void
{
ReadCapdata_struct_16 *buf;
int return_code;
- buf = kmalloc(sizeof(ReadCapdata_struct_16), GFP_KERNEL);
- if (buf == NULL) {
+
+ buf = kzalloc(sizeof(ReadCapdata_struct_16), GFP_KERNEL);
+ if (!buf) {
printk(KERN_WARNING "cciss: out of memory\n");
return;
}
- memset(buf, 0, sizeof(ReadCapdata_struct_16));
+
if (withirq) {
return_code = sendcmd_withirq(CCISS_READ_CAPACITY_16,
ctlr, buf, sizeof(ReadCapdata_struct_16),
1, logvol, 0, NULL, TYPE_CMD);
}
if (return_code == IO_OK) {
- *total_size = be64_to_cpu(*(__u64 *) buf->total_size)+1;
- *block_size = be32_to_cpu(*(__u32 *) buf->block_size);
+ *total_size = be64_to_cpu(*(__be64 *) buf->total_size);
+ *block_size = be32_to_cpu(*(__be32 *) buf->block_size);
} else { /* read capacity command failed */
printk(KERN_WARNING "cciss: read capacity failed\n");
*total_size = 0;
*block_size = BLOCK_SIZE;
}
- printk(KERN_INFO " blocks= %lld block_size= %d\n",
- *total_size, *block_size);
+ printk(KERN_INFO " blocks= %llu block_size= %d\n",
+ (unsigned long long)*total_size+1, *block_size);
kfree(buf);
- return;
}
static int cciss_revalidate(struct gendisk *disk)
/* We've sent down an abort or reset, but something else
has completed */
- if (srl->ncompletions >= (NR_CMDS + 2)) {
+ if (srl->ncompletions >= (hba[ctlr]->nr_cmds + 2)) {
/* Uh oh. No room to save it for later... */
printk(KERN_WARNING "cciss%d: Sendcmd: Invalid command addr, "
"reject list overflow, command lost!\n", ctlr);
#ifdef CONFIG_CISS_SCSI_TAPE
/* if we saved some commands for later, process them now. */
if (info_p->scsi_rejects.ncompletions > 0)
- do_cciss_intr(0, info_p, NULL);
+ do_cciss_intr(0, info_p);
#endif
cmd_free(info_p, c, 1);
return status;
start_io(h);
}
+static inline unsigned int make_status_bytes(unsigned int scsi_status_byte,
+ unsigned int msg_byte, unsigned int host_byte,
+ unsigned int driver_byte)
+{
+ /* inverse of macros in scsi.h */
+ return (scsi_status_byte & 0xff) |
+ ((msg_byte & 0xff) << 8) |
+ ((host_byte & 0xff) << 16) |
+ ((driver_byte & 0xff) << 24);
+}
+
+static inline int evaluate_target_status(CommandList_struct *cmd)
+{
+ unsigned char sense_key;
+ unsigned char status_byte, msg_byte, host_byte, driver_byte;
+ int error_value;
+
+ /* If we get in here, it means we got "target status", that is, scsi status */
+ status_byte = cmd->err_info->ScsiStatus;
+ driver_byte = DRIVER_OK;
+ msg_byte = cmd->err_info->CommandStatus; /* correct? seems too device specific */
+
+ if (blk_pc_request(cmd->rq))
+ host_byte = DID_PASSTHROUGH;
+ else
+ host_byte = DID_OK;
+
+ error_value = make_status_bytes(status_byte, msg_byte,
+ host_byte, driver_byte);
+
+ if (cmd->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) {
+ if (!blk_pc_request(cmd->rq))
+ printk(KERN_WARNING "cciss: cmd %p "
+ "has SCSI Status 0x%x\n",
+ cmd, cmd->err_info->ScsiStatus);
+ return error_value;
+ }
+
+ /* check the sense key */
+ sense_key = 0xf & cmd->err_info->SenseInfo[2];
+ /* no status or recovered error */
+ if (((sense_key == 0x0) || (sense_key == 0x1)) && !blk_pc_request(cmd->rq))
+ error_value = 0;
+
+ if (!blk_pc_request(cmd->rq)) { /* Not SG_IO or similar? */
+ if (error_value != 0)
+ printk(KERN_WARNING "cciss: cmd %p has CHECK CONDITION"
+ " sense key = 0x%x\n", cmd, sense_key);
+ return error_value;
+ }
+
+ /* SG_IO or similar, copy sense data back */
+ if (cmd->rq->sense) {
+ if (cmd->rq->sense_len > cmd->err_info->SenseLen)
+ cmd->rq->sense_len = cmd->err_info->SenseLen;
+ memcpy(cmd->rq->sense, cmd->err_info->SenseInfo,
+ cmd->rq->sense_len);
+ } else
+ cmd->rq->sense_len = 0;
+
+ return error_value;
+}
+
/* checks the status of the job and calls complete buffers to mark all
* buffers for the completed job. Note that this function does not need
* to hold the hba/queue lock.
static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
int timeout)
{
- int status = 1;
int retry_cmd = 0;
+ struct request *rq = cmd->rq;
+
+ rq->errors = 0;
if (timeout)
- status = 0;
+ rq->errors = make_status_bytes(0, 0, 0, DRIVER_TIMEOUT);
- if (cmd->err_info->CommandStatus != 0) { /* an error has occurred */
- switch (cmd->err_info->CommandStatus) {
- unsigned char sense_key;
- case CMD_TARGET_STATUS:
- status = 0;
+ if (cmd->err_info->CommandStatus == 0) /* no error has occurred */
+ goto after_error_processing;
- if (cmd->err_info->ScsiStatus == 0x02) {
- printk(KERN_WARNING "cciss: cmd %p "
- "has CHECK CONDITION "
- " byte 2 = 0x%x\n", cmd,
- cmd->err_info->SenseInfo[2]
- );
- /* check the sense key */
- sense_key = 0xf & cmd->err_info->SenseInfo[2];
- /* no status or recovered error */
- if ((sense_key == 0x0) || (sense_key == 0x1)) {
- status = 1;
- }
- } else {
- printk(KERN_WARNING "cciss: cmd %p "
- "has SCSI Status 0x%x\n",
- cmd, cmd->err_info->ScsiStatus);
- }
- break;
- case CMD_DATA_UNDERRUN:
+ switch (cmd->err_info->CommandStatus) {
+ case CMD_TARGET_STATUS:
+ rq->errors = evaluate_target_status(cmd);
+ break;
+ case CMD_DATA_UNDERRUN:
+ if (blk_fs_request(cmd->rq)) {
printk(KERN_WARNING "cciss: cmd %p has"
" completed with data underrun "
"reported\n", cmd);
- break;
- case CMD_DATA_OVERRUN:
+ cmd->rq->data_len = cmd->err_info->ResidualCnt;
+ }
+ break;
+ case CMD_DATA_OVERRUN:
+ if (blk_fs_request(cmd->rq))
printk(KERN_WARNING "cciss: cmd %p has"
" completed with data overrun "
"reported\n", cmd);
- break;
- case CMD_INVALID:
- printk(KERN_WARNING "cciss: cmd %p is "
- "reported invalid\n", cmd);
- status = 0;
- break;
- case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: cmd %p has "
- "protocol error \n", cmd);
- status = 0;
- break;
- case CMD_HARDWARE_ERR:
- printk(KERN_WARNING "cciss: cmd %p had "
- " hardware error\n", cmd);
- status = 0;
- break;
- case CMD_CONNECTION_LOST:
- printk(KERN_WARNING "cciss: cmd %p had "
- "connection lost\n", cmd);
- status = 0;
- break;
- case CMD_ABORTED:
- printk(KERN_WARNING "cciss: cmd %p was "
- "aborted\n", cmd);
- status = 0;
- break;
- case CMD_ABORT_FAILED:
- printk(KERN_WARNING "cciss: cmd %p reports "
- "abort failed\n", cmd);
- status = 0;
- break;
- case CMD_UNSOLICITED_ABORT:
- printk(KERN_WARNING "cciss%d: unsolicited "
- "abort %p\n", h->ctlr, cmd);
- if (cmd->retry_count < MAX_CMD_RETRIES) {
- retry_cmd = 1;
- printk(KERN_WARNING
- "cciss%d: retrying %p\n", h->ctlr, cmd);
- cmd->retry_count++;
- } else
- printk(KERN_WARNING
- "cciss%d: %p retried too "
- "many times\n", h->ctlr, cmd);
- status = 0;
- break;
- case CMD_TIMEOUT:
- printk(KERN_WARNING "cciss: cmd %p timedout\n", cmd);
- status = 0;
- break;
- default:
- printk(KERN_WARNING "cciss: cmd %p returned "
- "unknown status %x\n", cmd,
- cmd->err_info->CommandStatus);
- status = 0;
- }
+ break;
+ case CMD_INVALID:
+ printk(KERN_WARNING "cciss: cmd %p is "
+ "reported invalid\n", cmd);
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ break;
+ case CMD_PROTOCOL_ERR:
+ printk(KERN_WARNING "cciss: cmd %p has "
+ "protocol error \n", cmd);
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ break;
+ case CMD_HARDWARE_ERR:
+ printk(KERN_WARNING "cciss: cmd %p had "
+ " hardware error\n", cmd);
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ break;
+ case CMD_CONNECTION_LOST:
+ printk(KERN_WARNING "cciss: cmd %p had "
+ "connection lost\n", cmd);
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ break;
+ case CMD_ABORTED:
+ printk(KERN_WARNING "cciss: cmd %p was "
+ "aborted\n", cmd);
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ABORT);
+ break;
+ case CMD_ABORT_FAILED:
+ printk(KERN_WARNING "cciss: cmd %p reports "
+ "abort failed\n", cmd);
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ break;
+ case CMD_UNSOLICITED_ABORT:
+ printk(KERN_WARNING "cciss%d: unsolicited "
+ "abort %p\n", h->ctlr, cmd);
+ if (cmd->retry_count < MAX_CMD_RETRIES) {
+ retry_cmd = 1;
+ printk(KERN_WARNING
+ "cciss%d: retrying %p\n", h->ctlr, cmd);
+ cmd->retry_count++;
+ } else
+ printk(KERN_WARNING
+ "cciss%d: %p retried too "
+ "many times\n", h->ctlr, cmd);
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ABORT);
+ break;
+ case CMD_TIMEOUT:
+ printk(KERN_WARNING "cciss: cmd %p timedout\n", cmd);
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ break;
+ default:
+ printk(KERN_WARNING "cciss: cmd %p returned "
+ "unknown status %x\n", cmd,
+ cmd->err_info->CommandStatus);
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
}
+
+after_error_processing:
+
/* We need to return this command */
if (retry_cmd) {
resend_cciss_cmd(h, cmd);
return;
}
-
cmd->rq->completion_data = cmd;
- cmd->rq->errors = status;
- blk_add_trace_rq(cmd->rq->q, cmd->rq, BLK_TA_COMPLETE);
blk_complete_request(cmd->rq);
}
/*
* Get a request and submit it to the controller.
*/
-static void do_cciss_request(request_queue_t *q)
+static void do_cciss_request(struct request_queue *q)
{
ctlr_info_t *h = q->queuedata;
CommandList_struct *c;
c->Request.Type.Type = TYPE_CMD; // It is a command.
c->Request.Type.Attribute = ATTR_SIMPLE;
c->Request.Type.Direction =
- (rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
+ (rq_data_dir(creq) == READ) ? XFER_READ : XFER_WRITE;
c->Request.Timeout = 0; // Don't time out
c->Request.CDB[0] =
(rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
(int)creq->nr_sectors);
#endif /* CCISS_DEBUG */
+ sg_init_table(tmp_sg, MAXSGENTRIES);
seg = blk_rq_map_sg(q, creq, tmp_sg);
/* get the DMA records for the setup */
for (i = 0; i < seg; i++) {
c->SG[i].Len = tmp_sg[i].length;
- temp64.val = (__u64) pci_map_page(h->pdev, tmp_sg[i].page,
+ temp64.val = (__u64) pci_map_page(h->pdev, sg_page(&tmp_sg[i]),
tmp_sg[i].offset,
tmp_sg[i].length, dir);
c->SG[i].Addr.lower = temp64.val32.lower;
#endif /* CCISS_DEBUG */
c->Header.SGList = c->Header.SGTotal = seg;
- if(h->cciss_read == CCISS_READ_10) {
- c->Request.CDB[1] = 0;
- c->Request.CDB[2] = (start_blk >> 24) & 0xff; //MSB
- c->Request.CDB[3] = (start_blk >> 16) & 0xff;
- c->Request.CDB[4] = (start_blk >> 8) & 0xff;
- c->Request.CDB[5] = start_blk & 0xff;
- c->Request.CDB[6] = 0; // (sect >> 24) & 0xff; MSB
- c->Request.CDB[7] = (creq->nr_sectors >> 8) & 0xff;
- c->Request.CDB[8] = creq->nr_sectors & 0xff;
- c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0;
+ if (likely(blk_fs_request(creq))) {
+ if(h->cciss_read == CCISS_READ_10) {
+ c->Request.CDB[1] = 0;
+ c->Request.CDB[2] = (start_blk >> 24) & 0xff; //MSB
+ c->Request.CDB[3] = (start_blk >> 16) & 0xff;
+ c->Request.CDB[4] = (start_blk >> 8) & 0xff;
+ c->Request.CDB[5] = start_blk & 0xff;
+ c->Request.CDB[6] = 0; // (sect >> 24) & 0xff; MSB
+ c->Request.CDB[7] = (creq->nr_sectors >> 8) & 0xff;
+ c->Request.CDB[8] = creq->nr_sectors & 0xff;
+ c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0;
+ } else {
+ u32 upper32 = upper_32_bits(start_blk);
+
+ c->Request.CDBLen = 16;
+ c->Request.CDB[1]= 0;
+ c->Request.CDB[2]= (upper32 >> 24) & 0xff; //MSB
+ c->Request.CDB[3]= (upper32 >> 16) & 0xff;
+ c->Request.CDB[4]= (upper32 >> 8) & 0xff;
+ c->Request.CDB[5]= upper32 & 0xff;
+ c->Request.CDB[6]= (start_blk >> 24) & 0xff;
+ c->Request.CDB[7]= (start_blk >> 16) & 0xff;
+ c->Request.CDB[8]= (start_blk >> 8) & 0xff;
+ c->Request.CDB[9]= start_blk & 0xff;
+ c->Request.CDB[10]= (creq->nr_sectors >> 24) & 0xff;
+ c->Request.CDB[11]= (creq->nr_sectors >> 16) & 0xff;
+ c->Request.CDB[12]= (creq->nr_sectors >> 8) & 0xff;
+ c->Request.CDB[13]= creq->nr_sectors & 0xff;
+ c->Request.CDB[14] = c->Request.CDB[15] = 0;
+ }
+ } else if (blk_pc_request(creq)) {
+ c->Request.CDBLen = creq->cmd_len;
+ memcpy(c->Request.CDB, creq->cmd, BLK_MAX_CDB);
} else {
- c->Request.CDBLen = 16;
- c->Request.CDB[1]= 0;
- c->Request.CDB[2]= (start_blk >> 56) & 0xff; //MSB
- c->Request.CDB[3]= (start_blk >> 48) & 0xff;
- c->Request.CDB[4]= (start_blk >> 40) & 0xff;
- c->Request.CDB[5]= (start_blk >> 32) & 0xff;
- c->Request.CDB[6]= (start_blk >> 24) & 0xff;
- c->Request.CDB[7]= (start_blk >> 16) & 0xff;
- c->Request.CDB[8]= (start_blk >> 8) & 0xff;
- c->Request.CDB[9]= start_blk & 0xff;
- c->Request.CDB[10]= (creq->nr_sectors >> 24) & 0xff;
- c->Request.CDB[11]= (creq->nr_sectors >> 16) & 0xff;
- c->Request.CDB[12]= (creq->nr_sectors >> 8) & 0xff;
- c->Request.CDB[13]= creq->nr_sectors & 0xff;
- c->Request.CDB[14] = c->Request.CDB[15] = 0;
+ printk(KERN_WARNING "cciss%d: bad request type %d\n", h->ctlr, creq->cmd_type);
+ BUG();
}
spin_lock_irq(q->queue_lock);
#endif
}
-static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t do_cciss_intr(int irq, void *dev_id)
{
ctlr_info_t *h = dev_id;
CommandList_struct *c;
a1 = a;
if ((a & 0x04)) {
a2 = (a >> 3);
- if (a2 >= NR_CMDS) {
+ if (a2 >= h->nr_cmds) {
printk(KERN_WARNING
"cciss: controller cciss%d failed, stopping.\n",
h->ctlr);
if (err > 0) {
printk(KERN_WARNING "cciss: only %d MSI-X vectors "
"available\n", err);
+ goto default_int_mode;
} else {
printk(KERN_WARNING "cciss: MSI-X init failed %d\n",
err);
+ goto default_int_mode;
}
}
if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) {
if (!pci_enable_msi(pdev)) {
- c->intr[SIMPLE_MODE_INT] = pdev->irq;
c->msi_vector = 1;
- return;
} else {
printk(KERN_WARNING "cciss: MSI init failed\n");
- c->intr[SIMPLE_MODE_INT] = pdev->irq;
- return;
}
}
- default_int_mode:
+default_int_mode:
#endif /* CONFIG_PCI_MSI */
/* if we get here we're going to use the default interrupt mode */
c->intr[SIMPLE_MODE_INT] = pdev->irq;
return;
}
-static int cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
+static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
{
ushort subsystem_vendor_id, subsystem_device_id, command;
__u32 board_id, scratchpad = 0;
if (err) {
printk(KERN_ERR "cciss: Cannot obtain PCI resources, "
"aborting\n");
- goto err_out_disable_pdev;
+ return err;
}
subsystem_vendor_id = pdev->subsystem_vendor;
#ifdef CCISS_DEBUG
printk("address 0 = %x\n", c->paddr);
#endif /* CCISS_DEBUG */
- c->vaddr = remap_pci_mem(c->paddr, 200);
+ c->vaddr = remap_pci_mem(c->paddr, 0x250);
/* Wait for the board to become ready. (PCI hotplug needs this.)
* We poll for up to 120 secs, once per 100ms. */
print_cfg_table(c->cfgtable);
#endif /* CCISS_DEBUG */
+ /* Some controllers support Zero Memory Raid (ZMR).
+ * When configured in ZMR mode the number of supported
+ * commands drops to 64. So instead of just setting an
+ * arbitrary value we make the driver a little smarter.
+ * We read the config table to tell us how many commands
+ * are supported on the controller then subtract 4 to
+ * leave a little room for ioctl calls.
+ */
+ c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
for (i = 0; i < ARRAY_SIZE(products); i++) {
if (board_id == products[i].board_id) {
c->product_name = products[i].product_name;
c->access = *(products[i].access);
+ c->nr_cmds = c->max_commands - 4;
break;
}
}
- if (i == ARRAY_SIZE(products)) {
- printk(KERN_WARNING "cciss: Sorry, I don't know how"
- " to access the Smart Array controller %08lx\n",
- (unsigned long)board_id);
- err = -ENODEV;
- goto err_out_free_res;
- }
if ((readb(&c->cfgtable->Signature[0]) != 'C') ||
(readb(&c->cfgtable->Signature[1]) != 'I') ||
(readb(&c->cfgtable->Signature[2]) != 'S') ||
err = -ENODEV;
goto err_out_free_res;
}
+ /* We didn't find the controller in our list. We know the
+ * signature is valid. If it's an HP device let's try to
+ * bind to the device and fire it up. Otherwise we bail.
+ */
+ if (i == ARRAY_SIZE(products)) {
+ if (subsystem_vendor_id == PCI_VENDOR_ID_HP) {
+ c->product_name = products[i-1].product_name;
+ c->access = *(products[i-1].access);
+ c->nr_cmds = c->max_commands - 4;
+ printk(KERN_WARNING "cciss: This is an unknown "
+ "Smart Array controller.\n"
+ "cciss: Please update to the latest driver "
+ "available from www.hp.com.\n");
+ } else {
+ printk(KERN_WARNING "cciss: Sorry, I don't know how"
+ " to access the Smart Array controller %08lx\n"
+ , (unsigned long)board_id);
+ err = -ENODEV;
+ goto err_out_free_res;
+ }
+ }
#ifdef CONFIG_X86
{
/* Need to enable prefetch in the SCSI core for 6400 in x86 */
}
#endif
+ /* Disabling DMA prefetch and refetch for the P600.
+ * An ASIC bug may result in accesses to invalid memory addresses.
+ * We've disabled prefetch for some time now. Testing with XEN
+ * kernels revealed a bug in the refetch if dom0 resides on a P600.
+ */
+ if(board_id == 0x3225103C) {
+ __u32 dma_prefetch;
+ __u32 dma_refetch;
+ dma_prefetch = readl(c->vaddr + I2O_DMA1_CFG);
+ dma_prefetch |= 0x8000;
+ writel(dma_prefetch, c->vaddr + I2O_DMA1_CFG);
+ pci_read_config_dword(pdev, PCI_COMMAND_PARITY, &dma_refetch);
+ dma_refetch |= 0x1;
+ pci_write_config_dword(pdev, PCI_COMMAND_PARITY, dma_refetch);
+ }
+
#ifdef CCISS_DEBUG
printk("Trying to put board into Simple mode\n");
#endif /* CCISS_DEBUG */
}
return 0;
- err_out_free_res:
+err_out_free_res:
+ /*
+ * Deliberately omit pci_disable_device(): it does something nasty to
+ * Smart Array controllers that pci_enable_device does not undo
+ */
pci_release_regions(pdev);
-
- err_out_disable_pdev:
- pci_disable_device(pdev);
return err;
}
int i;
int listlength = 0;
__u32 lunid = 0;
- int block_size;
+ unsigned block_size;
sector_t total_size;
ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
}
cciss_read_capacity(cntl_num, i, 0, &total_size, &block_size);
- /* total_size = last LBA + 1 */
- if(total_size == (__u32) 0) {
+ /* If read_capacity returns all F's the logical is >2TB */
+ /* so we switch to 16-byte CDBs for all read/write ops */
+ if(total_size == 0xFFFFFFFFULL) {
cciss_read_capacity_16(cntl_num, i, 0,
&total_size, &block_size);
hba[cntl_num]->cciss_read = CCISS_READ_16;
/* Returns -1 if no free entries are left. */
static int alloc_cciss_hba(void)
{
- struct gendisk *disk[NWD];
- int i, n;
- for (n = 0; n < NWD; n++) {
- disk[n] = alloc_disk(1 << NWD_SHIFT);
- if (!disk[n])
- goto out;
- }
+ int i;
for (i = 0; i < MAX_CTLR; i++) {
if (!hba[i]) {
ctlr_info_t *p;
+
p = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL);
if (!p)
goto Enomem;
- for (n = 0; n < NWD; n++)
- p->gendisk[n] = disk[n];
+ p->gendisk[0] = alloc_disk(1 << NWD_SHIFT);
+ if (!p->gendisk[0]) {
+ kfree(p);
+ goto Enomem;
+ }
hba[i] = p;
return i;
}
}
printk(KERN_WARNING "cciss: This driver supports a maximum"
" of %d controllers.\n", MAX_CTLR);
- goto out;
- Enomem:
+ return -1;
+Enomem:
printk(KERN_ERR "cciss: out of memory.\n");
- out:
- while (n--)
- put_disk(disk[n]);
return -1;
}
int n;
hba[i] = NULL;
- for (n = 0; n < NWD; n++)
+ for (n = 0; n < CISS_MAX_LUN; n++)
put_disk(p->gendisk[n]);
kfree(p);
}
static int __devinit cciss_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- request_queue_t *q;
int i;
- int j;
+ int j = 0;
int rc;
int dac;
hba[i]->intr[SIMPLE_MODE_INT], dac ? "" : " not");
hba[i]->cmd_pool_bits =
- kmalloc(((NR_CMDS + BITS_PER_LONG -
+ kmalloc(((hba[i]->nr_cmds + BITS_PER_LONG -
1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL);
hba[i]->cmd_pool = (CommandList_struct *)
pci_alloc_consistent(hba[i]->pdev,
- NR_CMDS * sizeof(CommandList_struct),
+ hba[i]->nr_cmds * sizeof(CommandList_struct),
&(hba[i]->cmd_pool_dhandle));
hba[i]->errinfo_pool = (ErrorInfo_struct *)
pci_alloc_consistent(hba[i]->pdev,
- NR_CMDS * sizeof(ErrorInfo_struct),
+ hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
&(hba[i]->errinfo_pool_dhandle));
if ((hba[i]->cmd_pool_bits == NULL)
|| (hba[i]->cmd_pool == NULL)
#ifdef CONFIG_CISS_SCSI_TAPE
hba[i]->scsi_rejects.complete =
kmalloc(sizeof(hba[i]->scsi_rejects.complete[0]) *
- (NR_CMDS + 5), GFP_KERNEL);
+ (hba[i]->nr_cmds + 5), GFP_KERNEL);
if (hba[i]->scsi_rejects.complete == NULL) {
printk(KERN_ERR "cciss: out of memory");
goto clean4;
/* command and error info recs zeroed out before
they are used */
memset(hba[i]->cmd_pool_bits, 0,
- ((NR_CMDS + BITS_PER_LONG -
+ ((hba[i]->nr_cmds + BITS_PER_LONG -
1) / BITS_PER_LONG) * sizeof(unsigned long));
#ifdef CCISS_DEBUG
hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON);
cciss_procinit(i);
+
+ hba[i]->cciss_max_sectors = 2048;
+
hba[i]->busy_initializing = 0;
- for (j = 0; j < NWD; j++) { /* mfm */
+ do {
drive_info_struct *drv = &(hba[i]->drv[j]);
struct gendisk *disk = hba[i]->gendisk[j];
+ struct request_queue *q;
+
+ /* Check if the disk was allocated already */
+ if (!disk){
+ hba[i]->gendisk[j] = alloc_disk(1 << NWD_SHIFT);
+ disk = hba[i]->gendisk[j];
+ }
+
+ /* Check that the disk was able to be allocated */
+ if (!disk) {
+ printk(KERN_ERR "cciss: unable to allocate memory for disk %d\n", j);
+ goto clean4;
+ }
q = blk_init_queue(do_cciss_request, &hba[i]->lock);
if (!q) {
printk(KERN_ERR
"cciss: unable to allocate queue for disk %d\n",
j);
- break;
+ goto clean4;
}
drv->queue = q;
- q->backing_dev_info.ra_pages = READ_AHEAD;
blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
/* This is a hardware imposed limit. */
/* This is a limit in the driver and could be eliminated. */
blk_queue_max_phys_segments(q, MAXSGENTRIES);
- blk_queue_max_sectors(q, 512);
+ blk_queue_max_sectors(q, hba[i]->cciss_max_sectors);
blk_queue_softirq_done(q, cciss_softirq_done);
continue;
blk_queue_hardsect_size(q, drv->block_size);
set_capacity(disk, drv->nr_blocks);
- add_disk(disk);
- }
+ j++;
+ } while (j <= hba[i]->highest_lun);
+
+ /* Make sure all queue data is written out before */
+ /* interrupt handler, triggered by add_disk, */
+ /* is allowed to start them. */
+ wmb();
+
+ for (j = 0; j <= hba[i]->highest_lun; j++)
+ add_disk(hba[i]->gendisk[j]);
+
+ /* we must register the controller even if no disks exist */
+ if (hba[i]->highest_lun == -1)
+ add_disk(hba[i]->gendisk[0]);
return 1;
kfree(hba[i]->cmd_pool_bits);
if (hba[i]->cmd_pool)
pci_free_consistent(hba[i]->pdev,
- NR_CMDS * sizeof(CommandList_struct),
+ hba[i]->nr_cmds * sizeof(CommandList_struct),
hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
if (hba[i]->errinfo_pool)
pci_free_consistent(hba[i]->pdev,
- NR_CMDS * sizeof(ErrorInfo_struct),
+ hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
hba[i]->errinfo_pool,
hba[i]->errinfo_pool_dhandle);
free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]);
unregister_blkdev(hba[i]->major, hba[i]->devname);
clean1:
hba[i]->busy_initializing = 0;
+ /* cleanup any queues that may have been initialized */
+ for (j=0; j <= hba[i]->highest_lun; j++){
+ drive_info_struct *drv = &(hba[i]->drv[j]);
+ if (drv->queue)
+ blk_cleanup_queue(drv->queue);
+ }
+ /*
+ * Deliberately omit pci_disable_device(): it does something nasty to
+ * Smart Array controllers that pci_enable_device does not undo
+ */
+ pci_release_regions(pdev);
+ pci_set_drvdata(pdev, NULL);
free_hba(i);
return -1;
}
-static void __devexit cciss_remove_one(struct pci_dev *pdev)
+static void cciss_shutdown(struct pci_dev *pdev)
{
ctlr_info_t *tmp_ptr;
- int i, j;
+ int i;
char flush_buf[4];
int return_code;
- if (pci_get_drvdata(pdev) == NULL) {
- printk(KERN_ERR "cciss: Unable to remove device \n");
- return;
- }
tmp_ptr = pci_get_drvdata(pdev);
+ if (tmp_ptr == NULL)
+ return;
i = tmp_ptr->ctlr;
- if (hba[i] == NULL) {
- printk(KERN_ERR "cciss: device appears to "
- "already be removed \n");
+ if (hba[i] == NULL)
return;
- }
+
/* Turn board interrupts off and send the flush cache command */
/* sendcmd will turn off interrupt, and send the flush...
* To write all data in the battery backed cache to disks */
memset(flush_buf, 0, 4);
return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0, 0, 0, NULL,
TYPE_CMD);
- if (return_code != IO_OK) {
- printk(KERN_WARNING "Error Flushing cache on controller %d\n",
- i);
+ if (return_code == IO_OK) {
+ printk(KERN_INFO "Completed flushing cache on controller %d\n", i);
+ } else {
+ printk(KERN_WARNING "Error flushing cache on controller %d\n", i);
}
free_irq(hba[i]->intr[2], hba[i]);
+}
-#ifdef CONFIG_PCI_MSI
- if (hba[i]->msix_vector)
- pci_disable_msix(hba[i]->pdev);
- else if (hba[i]->msi_vector)
- pci_disable_msi(hba[i]->pdev);
-#endif /* CONFIG_PCI_MSI */
+static void __devexit cciss_remove_one(struct pci_dev *pdev)
+{
+ ctlr_info_t *tmp_ptr;
+ int i, j;
+
+ if (pci_get_drvdata(pdev) == NULL) {
+ printk(KERN_ERR "cciss: Unable to remove device \n");
+ return;
+ }
+ tmp_ptr = pci_get_drvdata(pdev);
+ i = tmp_ptr->ctlr;
+ if (hba[i] == NULL) {
+ printk(KERN_ERR "cciss: device appears to "
+ "already be removed \n");
+ return;
+ }
- iounmap(hba[i]->vaddr);
- cciss_unregister_scsi(i); /* unhook from SCSI subsystem */
- unregister_blkdev(hba[i]->major, hba[i]->devname);
remove_proc_entry(hba[i]->devname, proc_cciss);
+ unregister_blkdev(hba[i]->major, hba[i]->devname);
/* remove it from the disk list */
- for (j = 0; j < NWD; j++) {
+ for (j = 0; j < CISS_MAX_LUN; j++) {
struct gendisk *disk = hba[i]->gendisk[j];
if (disk) {
- request_queue_t *q = disk->queue;
+ struct request_queue *q = disk->queue;
if (disk->flags & GENHD_FL_UP)
del_gendisk(disk);
}
}
- pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(CommandList_struct),
+ cciss_unregister_scsi(i); /* unhook from SCSI subsystem */
+
+ cciss_shutdown(pdev);
+
+#ifdef CONFIG_PCI_MSI
+ if (hba[i]->msix_vector)
+ pci_disable_msix(hba[i]->pdev);
+ else if (hba[i]->msi_vector)
+ pci_disable_msi(hba[i]->pdev);
+#endif /* CONFIG_PCI_MSI */
+
+ iounmap(hba[i]->vaddr);
+
+ pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(CommandList_struct),
hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
- pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(ErrorInfo_struct),
+ pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle);
kfree(hba[i]->cmd_pool_bits);
#ifdef CONFIG_CISS_SCSI_TAPE
kfree(hba[i]->scsi_rejects.complete);
#endif
+ /*
+ * Deliberately omit pci_disable_device(): it does something nasty to
+ * Smart Array controllers that pci_enable_device does not undo
+ */
pci_release_regions(pdev);
- pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
free_hba(i);
}
.probe = cciss_init_one,
.remove = __devexit_p(cciss_remove_one),
.id_table = cciss_pci_device_id, /* id_table */
+ .shutdown = cciss_shutdown,
};
/*
cciss_remove_one(hba[i]->pdev);
}
}
- remove_proc_entry("cciss", proc_root_driver);
+ remove_proc_entry("driver/cciss", NULL);
}
static void fail_all_cmds(unsigned long ctlr)