MODULE_VERSION("3.6.20");
MODULE_LICENSE("GPL");
+static int cciss_allow_hpsa;
+module_param(cciss_allow_hpsa, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(cciss_allow_hpsa,
+ "Prevent cciss driver from accessing hardware known to be "
+ " supported by the hpsa driver");
+
#include "cciss_cmd.h"
#include "cciss.h"
#include <linux/cciss_ioctl.h>
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324A},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324B},
- {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
};
{0x409D0E11, "Smart Array 6400 EM", &SA5_access},
{0x40910E11, "Smart Array 6i", &SA5_access},
{0x3225103C, "Smart Array P600", &SA5_access},
- {0x3223103C, "Smart Array P800", &SA5_access},
- {0x3234103C, "Smart Array P400", &SA5_access},
{0x3235103C, "Smart Array P400i", &SA5_access},
{0x3211103C, "Smart Array E200i", &SA5_access},
{0x3212103C, "Smart Array E200", &SA5_access},
{0x3214103C, "Smart Array E200i", &SA5_access},
{0x3215103C, "Smart Array E200i", &SA5_access},
{0x3237103C, "Smart Array E500", &SA5_access},
+/* controllers below this line are also supported by the hpsa driver. */
+#define HPSA_BOUNDARY 0x3223103C
+ {0x3223103C, "Smart Array P800", &SA5_access},
+ {0x3234103C, "Smart Array P400", &SA5_access},
{0x323D103C, "Smart Array P700m", &SA5_access},
{0x3241103C, "Smart Array P212", &SA5_access},
{0x3243103C, "Smart Array P410", &SA5_access},
{0x3249103C, "Smart Array P812", &SA5_access},
{0x324A103C, "Smart Array P712m", &SA5_access},
{0x324B103C, "Smart Array P711m", &SA5_access},
- {0xFFFF103C, "Unknown Smart Array", &SA5_access},
};
/* How long to wait (in milliseconds) for board to go into simple mode */
#include "cciss_scsi.c" /* For SCSI tape support */
+static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
+ "UNKNOWN"
+};
+#define RAID_UNKNOWN (sizeof(raid_label) / sizeof(raid_label[0])-1)
+
#ifdef CONFIG_PROC_FS
/*
#define ENG_GIG 1000000000
#define ENG_GIG_FACTOR (ENG_GIG/512)
#define ENGAGE_SCSI "engage scsi"
-static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
- "UNKNOWN"
-};
-#define RAID_UNKNOWN (sizeof(raid_label) / sizeof(raid_label[0])-1)
static struct proc_dir_entry *proc_cciss;
return err;
}
-static struct file_operations cciss_proc_fops = {
+static const struct file_operations cciss_proc_fops = {
.owner = THIS_MODULE,
.open = cciss_seq_open,
.read = seq_read,
return count;
}
-DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan);
+static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan);
static ssize_t dev_show_unique_id(struct device *dev,
struct device_attribute *attr,
sn[8], sn[9], sn[10], sn[11],
sn[12], sn[13], sn[14], sn[15]);
}
-DEVICE_ATTR(unique_id, S_IRUGO, dev_show_unique_id, NULL);
+static DEVICE_ATTR(unique_id, S_IRUGO, dev_show_unique_id, NULL);
static ssize_t dev_show_vendor(struct device *dev,
struct device_attribute *attr,
else
return snprintf(buf, sizeof(vendor) + 1, "%s\n", drv->vendor);
}
-DEVICE_ATTR(vendor, S_IRUGO, dev_show_vendor, NULL);
+static DEVICE_ATTR(vendor, S_IRUGO, dev_show_vendor, NULL);
static ssize_t dev_show_model(struct device *dev,
struct device_attribute *attr,
else
return snprintf(buf, sizeof(model) + 1, "%s\n", drv->model);
}
-DEVICE_ATTR(model, S_IRUGO, dev_show_model, NULL);
+static DEVICE_ATTR(model, S_IRUGO, dev_show_model, NULL);
static ssize_t dev_show_rev(struct device *dev,
struct device_attribute *attr,
else
return snprintf(buf, sizeof(rev) + 1, "%s\n", drv->rev);
}
-DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL);
+static DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL);
static ssize_t cciss_show_lunid(struct device *dev,
struct device_attribute *attr, char *buf)
lunid[0], lunid[1], lunid[2], lunid[3],
lunid[4], lunid[5], lunid[6], lunid[7]);
}
-DEVICE_ATTR(lunid, S_IRUGO, cciss_show_lunid, NULL);
+static DEVICE_ATTR(lunid, S_IRUGO, cciss_show_lunid, NULL);
static ssize_t cciss_show_raid_level(struct device *dev,
struct device_attribute *attr, char *buf)
return snprintf(buf, strlen(raid_label[raid]) + 7, "RAID %s\n",
raid_label[raid]);
}
-DEVICE_ATTR(raid_level, S_IRUGO, cciss_show_raid_level, NULL);
+static DEVICE_ATTR(raid_level, S_IRUGO, cciss_show_raid_level, NULL);
static ssize_t cciss_show_usage_count(struct device *dev,
struct device_attribute *attr, char *buf)
spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
return snprintf(buf, 20, "%d\n", count);
}
-DEVICE_ATTR(usage_count, S_IRUGO, cciss_show_usage_count, NULL);
+static DEVICE_ATTR(usage_count, S_IRUGO, cciss_show_usage_count, NULL);
static struct attribute *cciss_host_attrs[] = {
&dev_attr_rescan.attr,
.attrs = cciss_host_attrs,
};
-static struct attribute_group *cciss_host_attr_groups[] = {
+static const struct attribute_group *cciss_host_attr_groups[] = {
&cciss_host_attr_group,
NULL
};
__u64 cfg_offset;
__u32 cfg_base_addr;
__u64 cfg_base_addr_index;
- int i, err;
+ int i, prod_index, err;
+
+ subsystem_vendor_id = pdev->subsystem_vendor;
+ subsystem_device_id = pdev->subsystem_device;
+ board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
+ subsystem_vendor_id);
+
+ for (i = 0; i < ARRAY_SIZE(products); i++) {
+ /* Stand aside for hpsa driver on request */
+ if (cciss_allow_hpsa && products[i].board_id == HPSA_BOUNDARY)
+ return -ENODEV;
+ if (board_id == products[i].board_id)
+ break;
+ }
+ prod_index = i;
+ if (prod_index == ARRAY_SIZE(products)) {
+ dev_warn(&pdev->dev,
+ "unrecognized board ID: 0x%08lx, ignoring.\n",
+ (unsigned long) board_id);
+ return -ENODEV;
+ }
/* check to see if controller has been disabled */
/* BEFORE trying to enable it */
return err;
}
- subsystem_vendor_id = pdev->subsystem_vendor;
- subsystem_device_id = pdev->subsystem_device;
- board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
- subsystem_vendor_id);
-
#ifdef CCISS_DEBUG
printk("command = %x\n", command);
printk("irq = %x\n", pdev->irq);
* leave a little room for ioctl calls.
*/
c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
- for (i = 0; i < ARRAY_SIZE(products); i++) {
- if (board_id == products[i].board_id) {
- c->product_name = products[i].product_name;
- c->access = *(products[i].access);
- c->nr_cmds = c->max_commands - 4;
- break;
- }
- }
+ c->product_name = products[prod_index].product_name;
+ c->access = *(products[prod_index].access);
+ c->nr_cmds = c->max_commands - 4;
if ((readb(&c->cfgtable->Signature[0]) != 'C') ||
(readb(&c->cfgtable->Signature[1]) != 'I') ||
(readb(&c->cfgtable->Signature[2]) != 'S') ||
err = -ENODEV;
goto err_out_free_res;
}
- /* We didn't find the controller in our list. We know the
- * signature is valid. If it's an HP device let's try to
- * bind to the device and fire it up. Otherwise we bail.
- */
- if (i == ARRAY_SIZE(products)) {
- if (subsystem_vendor_id == PCI_VENDOR_ID_HP) {
- c->product_name = products[i-1].product_name;
- c->access = *(products[i-1].access);
- c->nr_cmds = c->max_commands - 4;
- printk(KERN_WARNING "cciss: This is an unknown "
- "Smart Array controller.\n"
- "cciss: Please update to the latest driver "
- "available from www.hp.com.\n");
- } else {
- printk(KERN_WARNING "cciss: Sorry, I don't know how"
- " to access the Smart Array controller %08lx\n"
- , (unsigned long)board_id);
- err = -ENODEV;
- goto err_out_free_res;
- }
- }
#ifdef CONFIG_X86
{
/* Need to enable prefetch in the SCSI core for 6400 in x86 */
mutex_init(&hba[i]->busy_shutting_down);
if (cciss_pci_init(hba[i], pdev) != 0)
- goto clean0;
+ goto clean_no_release_regions;
sprintf(hba[i]->devname, "cciss%d", i);
hba[i]->ctlr = i;
clean1:
cciss_destroy_hba_sysfs_entry(hba[i]);
clean0:
+ pci_release_regions(pdev);
+clean_no_release_regions:
hba[i]->busy_initializing = 0;
/*
* Deliberately omit pci_disable_device(): it does something nasty to
* Smart Array controllers that pci_enable_device does not undo
*/
- pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
free_hba(i);
return -1;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff