#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/delay.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/init.h>
+#include <linux/jiffies.h>
#include <linux/hdreg.h>
#include <linux/spinlock.h>
#include <linux/compat.h>
-#include <linux/blktrace_api.h>
+#include <linux/mutex.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <scsi/scsi_ioctl.h>
#include <linux/cdrom.h>
#include <linux/scatterlist.h>
+#include <linux/kthread.h>
#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
#define DRIVER_NAME "HP CISS Driver (v 3.6.20)"
MODULE_VERSION("3.6.20");
MODULE_LICENSE("GPL");
+static int cciss_allow_hpsa;
+module_param(cciss_allow_hpsa, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(cciss_allow_hpsa,
+ "Prevent cciss driver from accessing hardware known to be "
+ " supported by the hpsa driver");
+
#include "cciss_cmd.h"
#include "cciss.h"
#include <linux/cciss_ioctl.h>
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249},
- {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324A},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324B},
{0,}
};
{0x409D0E11, "Smart Array 6400 EM", &SA5_access},
{0x40910E11, "Smart Array 6i", &SA5_access},
{0x3225103C, "Smart Array P600", &SA5_access},
- {0x3223103C, "Smart Array P800", &SA5_access},
- {0x3234103C, "Smart Array P400", &SA5_access},
{0x3235103C, "Smart Array P400i", &SA5_access},
{0x3211103C, "Smart Array E200i", &SA5_access},
{0x3212103C, "Smart Array E200", &SA5_access},
{0x3214103C, "Smart Array E200i", &SA5_access},
{0x3215103C, "Smart Array E200i", &SA5_access},
{0x3237103C, "Smart Array E500", &SA5_access},
+/* controllers below this line are also supported by the hpsa driver. */
+#define HPSA_BOUNDARY 0x3223103C
+ {0x3223103C, "Smart Array P800", &SA5_access},
+ {0x3234103C, "Smart Array P400", &SA5_access},
{0x323D103C, "Smart Array P700m", &SA5_access},
{0x3241103C, "Smart Array P212", &SA5_access},
{0x3243103C, "Smart Array P410", &SA5_access},
{0x3245103C, "Smart Array P410i", &SA5_access},
{0x3247103C, "Smart Array P411", &SA5_access},
{0x3249103C, "Smart Array P812", &SA5_access},
- {0xFFFF103C, "Unknown Smart Array", &SA5_access},
+ {0x324A103C, "Smart Array P712m", &SA5_access},
+ {0x324B103C, "Smart Array P711m", &SA5_access},
};
/* How long to wait (in milliseconds) for board to go into simple mode */
static ctlr_info_t *hba[MAX_CTLR];
+static struct task_struct *cciss_scan_thread;
+static DEFINE_MUTEX(scan_mutex);
+static LIST_HEAD(scan_q);
+
static void do_cciss_request(struct request_queue *q);
static irqreturn_t do_cciss_intr(int irq, void *dev_id);
-static int cciss_open(struct inode *inode, struct file *filep);
-static int cciss_release(struct inode *inode, struct file *filep);
-static int cciss_ioctl(struct inode *inode, struct file *filep,
+static int cciss_open(struct block_device *bdev, fmode_t mode);
+static int cciss_release(struct gendisk *disk, fmode_t mode);
+static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg);
static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
static int cciss_revalidate(struct gendisk *disk);
-static int rebuild_lun_table(ctlr_info_t *h, int first_time);
-static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
- int clear_all);
+static int rebuild_lun_table(ctlr_info_t *h, int first_time, int via_ioctl);
+static int deregister_disk(ctlr_info_t *h, int drv_index,
+ int clear_all, int via_ioctl);
static void cciss_read_capacity(int ctlr, int logvol, int withirq,
sector_t *total_size, unsigned int *block_size);
__u32);
static void start_io(ctlr_info_t *h);
static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size,
- unsigned int use_unit_num, unsigned int log_unit,
__u8 page_code, unsigned char *scsi3addr, int cmd_type);
static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
- unsigned int use_unit_num, unsigned int log_unit,
- __u8 page_code, int cmd_type);
+ __u8 page_code, unsigned char scsi3addr[],
+ int cmd_type);
+static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c,
+ int attempt_retry);
+static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c);
static void fail_all_cmds(unsigned long ctlr);
+static int add_to_scan_list(struct ctlr_info *h);
+static int scan_thread(void *data);
+static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c);
+static void cciss_hba_release(struct device *dev);
+static void cciss_device_release(struct device *dev);
+static void cciss_free_gendisk(ctlr_info_t *h, int drv_index);
+static void cciss_free_drive_info(ctlr_info_t *h, int drv_index);
#ifdef CONFIG_PROC_FS
static void cciss_procinit(int i);
#endif /* CONFIG_PROC_FS */
#ifdef CONFIG_COMPAT
-static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg);
+static int cciss_compat_ioctl(struct block_device *, fmode_t,
+ unsigned, unsigned long);
#endif
-static struct block_device_operations cciss_fops = {
+static const struct block_device_operations cciss_fops = {
.owner = THIS_MODULE,
.open = cciss_open,
.release = cciss_release,
- .ioctl = cciss_ioctl,
+ .locked_ioctl = cciss_ioctl,
.getgeo = cciss_getgeo,
#ifdef CONFIG_COMPAT
.compat_ioctl = cciss_compat_ioctl,
/*
* Enqueuing and dequeuing functions for cmdlists.
*/
-static inline void addQ(CommandList_struct **Qptr, CommandList_struct *c)
+static inline void addQ(struct hlist_head *list, CommandList_struct *c)
{
- if (*Qptr == NULL) {
- *Qptr = c;
- c->next = c->prev = c;
- } else {
- c->prev = (*Qptr)->prev;
- c->next = (*Qptr);
- (*Qptr)->prev->next = c;
- (*Qptr)->prev = c;
- }
+ hlist_add_head(&c->list, list);
}
-static inline CommandList_struct *removeQ(CommandList_struct **Qptr,
- CommandList_struct *c)
+static inline void removeQ(CommandList_struct *c)
{
- if (c && c->next != c) {
- if (*Qptr == c)
- *Qptr = c->next;
- c->prev->next = c->next;
- c->next->prev = c->prev;
- } else {
- *Qptr = NULL;
+ /*
+ * After kexec/dump some commands might still
+ * be in flight, which the firmware will try
+ * to complete. Resetting the firmware doesn't work
+ * with old fw revisions, so we have to mark
+ * them off as 'stale' to prevent the driver from
+ * falling over.
+ */
+ if (WARN_ON(hlist_unhashed(&c->list))) {
+ c->cmd_type = CMD_MSG_STALE;
+ return;
}
- return c;
+
+ hlist_del_init(&c->list);
}
#include "cciss_scsi.c" /* For SCSI tape support */
-#define RAID_UNKNOWN 6
+static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
+ "UNKNOWN"
+};
+#define RAID_UNKNOWN (sizeof(raid_label) / sizeof(raid_label[0])-1)
#ifdef CONFIG_PROC_FS
#define ENG_GIG 1000000000
#define ENG_GIG_FACTOR (ENG_GIG/512)
#define ENGAGE_SCSI "engage scsi"
-static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
- "UNKNOWN"
-};
static struct proc_dir_entry *proc_cciss;
ctlr_info_t *h = seq->private;
unsigned ctlr = h->ctlr;
loff_t *pos = v;
- drive_info_struct *drv = &h->drv[*pos];
+ drive_info_struct *drv = h->drv[*pos];
if (*pos > h->highest_lun)
return 0;
vol_sz_frac *= 100;
sector_div(vol_sz_frac, ENG_GIG_FACTOR);
- if (drv->raid_level > 5)
+ if (drv->raid_level < 0 || drv->raid_level > RAID_UNKNOWN)
drv->raid_level = RAID_UNKNOWN;
seq_printf(seq, "cciss/c%dd%d:"
"\t%4u.%02uGB\tRAID %s\n",
h->busy_configuring = 0;
}
-static struct seq_operations cciss_seq_ops = {
+static const struct seq_operations cciss_seq_ops = {
.start = cciss_seq_start,
.show = cciss_seq_show,
.next = cciss_seq_next,
return err;
}
-static struct file_operations cciss_proc_fops = {
+static const struct file_operations cciss_proc_fops = {
.owner = THIS_MODULE,
.open = cciss_seq_open,
.read = seq_read,
}
#endif /* CONFIG_PROC_FS */
+#define MAX_PRODUCT_NAME_LEN 19
+
+#define to_hba(n) container_of(n, struct ctlr_info, dev)
+#define to_drv(n) container_of(n, drive_info_struct, dev)
+
+static ssize_t host_store_rescan(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ctlr_info *h = to_hba(dev);
+
+ add_to_scan_list(h);
+ wake_up_process(cciss_scan_thread);
+ wait_for_completion_interruptible(&h->scan_wait);
+
+ return count;
+}
+static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan);
+
+static ssize_t dev_show_unique_id(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ drive_info_struct *drv = to_drv(dev);
+ struct ctlr_info *h = to_hba(drv->dev.parent);
+ __u8 sn[16];
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ if (h->busy_configuring)
+ ret = -EBUSY;
+ else
+ memcpy(sn, drv->serial_no, sizeof(sn));
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+
+ if (ret)
+ return ret;
+ else
+ return snprintf(buf, 16 * 2 + 2,
+ "%02X%02X%02X%02X%02X%02X%02X%02X"
+ "%02X%02X%02X%02X%02X%02X%02X%02X\n",
+ sn[0], sn[1], sn[2], sn[3],
+ sn[4], sn[5], sn[6], sn[7],
+ sn[8], sn[9], sn[10], sn[11],
+ sn[12], sn[13], sn[14], sn[15]);
+}
+static DEVICE_ATTR(unique_id, S_IRUGO, dev_show_unique_id, NULL);
+
+static ssize_t dev_show_vendor(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ drive_info_struct *drv = to_drv(dev);
+ struct ctlr_info *h = to_hba(drv->dev.parent);
+ char vendor[VENDOR_LEN + 1];
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ if (h->busy_configuring)
+ ret = -EBUSY;
+ else
+ memcpy(vendor, drv->vendor, VENDOR_LEN + 1);
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+
+ if (ret)
+ return ret;
+ else
+ return snprintf(buf, sizeof(vendor) + 1, "%s\n", drv->vendor);
+}
+static DEVICE_ATTR(vendor, S_IRUGO, dev_show_vendor, NULL);
+
+static ssize_t dev_show_model(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ drive_info_struct *drv = to_drv(dev);
+ struct ctlr_info *h = to_hba(drv->dev.parent);
+ char model[MODEL_LEN + 1];
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ if (h->busy_configuring)
+ ret = -EBUSY;
+ else
+ memcpy(model, drv->model, MODEL_LEN + 1);
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+
+ if (ret)
+ return ret;
+ else
+ return snprintf(buf, sizeof(model) + 1, "%s\n", drv->model);
+}
+static DEVICE_ATTR(model, S_IRUGO, dev_show_model, NULL);
+
+static ssize_t dev_show_rev(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ drive_info_struct *drv = to_drv(dev);
+ struct ctlr_info *h = to_hba(drv->dev.parent);
+ char rev[REV_LEN + 1];
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ if (h->busy_configuring)
+ ret = -EBUSY;
+ else
+ memcpy(rev, drv->rev, REV_LEN + 1);
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+
+ if (ret)
+ return ret;
+ else
+ return snprintf(buf, sizeof(rev) + 1, "%s\n", drv->rev);
+}
+static DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL);
+
+static ssize_t cciss_show_lunid(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ drive_info_struct *drv = to_drv(dev);
+ struct ctlr_info *h = to_hba(drv->dev.parent);
+ unsigned long flags;
+ unsigned char lunid[8];
+
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ if (h->busy_configuring) {
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ return -EBUSY;
+ }
+ if (!drv->heads) {
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ return -ENOTTY;
+ }
+ memcpy(lunid, drv->LunID, sizeof(lunid));
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ return snprintf(buf, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+ lunid[0], lunid[1], lunid[2], lunid[3],
+ lunid[4], lunid[5], lunid[6], lunid[7]);
+}
+static DEVICE_ATTR(lunid, S_IRUGO, cciss_show_lunid, NULL);
+
+static ssize_t cciss_show_raid_level(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ drive_info_struct *drv = to_drv(dev);
+ struct ctlr_info *h = to_hba(drv->dev.parent);
+ int raid;
+ unsigned long flags;
+
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ if (h->busy_configuring) {
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ return -EBUSY;
+ }
+ raid = drv->raid_level;
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ if (raid < 0 || raid > RAID_UNKNOWN)
+ raid = RAID_UNKNOWN;
+
+ return snprintf(buf, strlen(raid_label[raid]) + 7, "RAID %s\n",
+ raid_label[raid]);
+}
+static DEVICE_ATTR(raid_level, S_IRUGO, cciss_show_raid_level, NULL);
+
+static ssize_t cciss_show_usage_count(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ drive_info_struct *drv = to_drv(dev);
+ struct ctlr_info *h = to_hba(drv->dev.parent);
+ unsigned long flags;
+ int count;
+
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ if (h->busy_configuring) {
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ return -EBUSY;
+ }
+ count = drv->usage_count;
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ return snprintf(buf, 20, "%d\n", count);
+}
+static DEVICE_ATTR(usage_count, S_IRUGO, cciss_show_usage_count, NULL);
+
+static struct attribute *cciss_host_attrs[] = {
+ &dev_attr_rescan.attr,
+ NULL
+};
+
+static struct attribute_group cciss_host_attr_group = {
+ .attrs = cciss_host_attrs,
+};
+
+static const struct attribute_group *cciss_host_attr_groups[] = {
+ &cciss_host_attr_group,
+ NULL
+};
+
+static struct device_type cciss_host_type = {
+ .name = "cciss_host",
+ .groups = cciss_host_attr_groups,
+ .release = cciss_hba_release,
+};
+
+static struct attribute *cciss_dev_attrs[] = {
+ &dev_attr_unique_id.attr,
+ &dev_attr_model.attr,
+ &dev_attr_vendor.attr,
+ &dev_attr_rev.attr,
+ &dev_attr_lunid.attr,
+ &dev_attr_raid_level.attr,
+ &dev_attr_usage_count.attr,
+ NULL
+};
+
+static struct attribute_group cciss_dev_attr_group = {
+ .attrs = cciss_dev_attrs,
+};
+
+static const struct attribute_group *cciss_dev_attr_groups[] = {
+ &cciss_dev_attr_group,
+ NULL
+};
+
+static struct device_type cciss_dev_type = {
+ .name = "cciss_device",
+ .groups = cciss_dev_attr_groups,
+ .release = cciss_device_release,
+};
+
+static struct bus_type cciss_bus_type = {
+ .name = "cciss",
+};
+
+/*
+ * cciss_hba_release is called when the reference count
+ * of h->dev goes to zero.
+ */
+static void cciss_hba_release(struct device *dev)
+{
+ /*
+ * nothing to do, but need this to avoid a warning
+ * about not having a release handler from lib/kref.c.
+ */
+}
+
+/*
+ * Initialize sysfs entry for each controller. This sets up and registers
+ * the 'cciss#' directory for each individual controller under
+ * /sys/bus/pci/devices/<dev>/.
+ */
+static int cciss_create_hba_sysfs_entry(struct ctlr_info *h)
+{
+ device_initialize(&h->dev);
+ h->dev.type = &cciss_host_type;
+ h->dev.bus = &cciss_bus_type;
+ dev_set_name(&h->dev, "%s", h->devname);
+ h->dev.parent = &h->pdev->dev;
+
+ return device_add(&h->dev);
+}
+
+/*
+ * Remove sysfs entries for an hba.
+ */
+static void cciss_destroy_hba_sysfs_entry(struct ctlr_info *h)
+{
+ device_del(&h->dev);
+ put_device(&h->dev); /* final put. */
+}
+
+/* cciss_device_release is called when the reference count
+ * of h->drv[x]dev goes to zero.
+ */
+static void cciss_device_release(struct device *dev)
+{
+ drive_info_struct *drv = to_drv(dev);
+ kfree(drv);
+}
+
+/*
+ * Initialize sysfs for each logical drive. This sets up and registers
+ * the 'c#d#' directory for each individual logical drive under
+ * /sys/bus/pci/devices/<dev/ccis#/. We also create a link from
+ * /sys/block/cciss!c#d# to this entry.
+ */
+static long cciss_create_ld_sysfs_entry(struct ctlr_info *h,
+ int drv_index)
+{
+ struct device *dev;
+
+ if (h->drv[drv_index]->device_initialized)
+ return 0;
+
+ dev = &h->drv[drv_index]->dev;
+ device_initialize(dev);
+ dev->type = &cciss_dev_type;
+ dev->bus = &cciss_bus_type;
+ dev_set_name(dev, "c%dd%d", h->ctlr, drv_index);
+ dev->parent = &h->dev;
+ h->drv[drv_index]->device_initialized = 1;
+ return device_add(dev);
+}
+
+/*
+ * Remove sysfs entries for a logical drive.
+ */
+static void cciss_destroy_ld_sysfs_entry(struct ctlr_info *h, int drv_index,
+ int ctlr_exiting)
+{
+ struct device *dev = &h->drv[drv_index]->dev;
+
+ /* special case for c*d0, we only destroy it on controller exit */
+ if (drv_index == 0 && !ctlr_exiting)
+ return;
+
+ device_del(dev);
+ put_device(dev); /* the "final" put. */
+ h->drv[drv_index] = NULL;
+}
+
/*
* For operations that cannot sleep, a command block is allocated at init,
* and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
c->cmdindex = i;
}
+ INIT_HLIST_NODE(&c->list);
c->busaddr = (__u32) cmd_dma_handle;
temp64.val = (__u64) err_dma_handle;
c->ErrDesc.Addr.lower = temp64.val32.lower;
/*
* Open. Make sure the device is really there.
*/
-static int cciss_open(struct inode *inode, struct file *filep)
+static int cciss_open(struct block_device *bdev, fmode_t mode)
{
- ctlr_info_t *host = get_host(inode->i_bdev->bd_disk);
- drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk);
+ ctlr_info_t *host = get_host(bdev->bd_disk);
+ drive_info_struct *drv = get_drv(bdev->bd_disk);
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss_open %s\n", inode->i_bdev->bd_disk->disk_name);
+ printk(KERN_DEBUG "cciss_open %s\n", bdev->bd_disk->disk_name);
#endif /* CCISS_DEBUG */
- if (host->busy_initializing || drv->busy_configuring)
+ if (drv->busy_configuring)
return -EBUSY;
/*
* Root is allowed to open raw volume zero even if it's not configured
* for "raw controller".
*/
if (drv->heads == 0) {
- if (iminor(inode) != 0) { /* not node 0? */
+ if (MINOR(bdev->bd_dev) != 0) { /* not node 0? */
/* if not node 0 make sure it is a partition = 0 */
- if (iminor(inode) & 0x0f) {
+ if (MINOR(bdev->bd_dev) & 0x0f) {
return -ENXIO;
/* if it is, make sure we have a LUN ID */
- } else if (drv->LunID == 0) {
+ } else if (memcmp(drv->LunID, CTLR_LUNID,
+ sizeof(drv->LunID))) {
return -ENXIO;
}
}
/*
* Close. Sync first.
*/
-static int cciss_release(struct inode *inode, struct file *filep)
+static int cciss_release(struct gendisk *disk, fmode_t mode)
{
- ctlr_info_t *host = get_host(inode->i_bdev->bd_disk);
- drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk);
+ ctlr_info_t *host = get_host(disk);
+ drive_info_struct *drv = get_drv(disk);
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss_release %s\n",
- inode->i_bdev->bd_disk->disk_name);
+ printk(KERN_DEBUG "cciss_release %s\n", disk->disk_name);
#endif /* CCISS_DEBUG */
drv->usage_count--;
#ifdef CONFIG_COMPAT
-static int do_ioctl(struct file *f, unsigned cmd, unsigned long arg)
+static int do_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned cmd, unsigned long arg)
{
int ret;
lock_kernel();
- ret = cciss_ioctl(f->f_path.dentry->d_inode, f, cmd, arg);
+ ret = cciss_ioctl(bdev, mode, cmd, arg);
unlock_kernel();
return ret;
}
-static int cciss_ioctl32_passthru(struct file *f, unsigned cmd,
- unsigned long arg);
-static int cciss_ioctl32_big_passthru(struct file *f, unsigned cmd,
- unsigned long arg);
+static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode,
+ unsigned cmd, unsigned long arg);
+static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode,
+ unsigned cmd, unsigned long arg);
-static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg)
+static int cciss_compat_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned cmd, unsigned long arg)
{
switch (cmd) {
case CCISS_GETPCIINFO:
case CCISS_REGNEWD:
case CCISS_RESCANDISK:
case CCISS_GETLUNINFO:
- return do_ioctl(f, cmd, arg);
+ return do_ioctl(bdev, mode, cmd, arg);
case CCISS_PASSTHRU32:
- return cciss_ioctl32_passthru(f, cmd, arg);
+ return cciss_ioctl32_passthru(bdev, mode, cmd, arg);
case CCISS_BIG_PASSTHRU32:
- return cciss_ioctl32_big_passthru(f, cmd, arg);
+ return cciss_ioctl32_big_passthru(bdev, mode, cmd, arg);
default:
return -ENOIOCTLCMD;
}
}
-static int cciss_ioctl32_passthru(struct file *f, unsigned cmd,
- unsigned long arg)
+static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode,
+ unsigned cmd, unsigned long arg)
{
IOCTL32_Command_struct __user *arg32 =
(IOCTL32_Command_struct __user *) arg;
if (err)
return -EFAULT;
- err = do_ioctl(f, CCISS_PASSTHRU, (unsigned long)p);
+ err = do_ioctl(bdev, mode, CCISS_PASSTHRU, (unsigned long)p);
if (err)
return err;
err |=
return err;
}
-static int cciss_ioctl32_big_passthru(struct file *file, unsigned cmd,
- unsigned long arg)
+static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode,
+ unsigned cmd, unsigned long arg)
{
BIG_IOCTL32_Command_struct __user *arg32 =
(BIG_IOCTL32_Command_struct __user *) arg;
if (err)
return -EFAULT;
- err = do_ioctl(file, CCISS_BIG_PASSTHRU, (unsigned long)p);
+ err = do_ioctl(bdev, mode, CCISS_BIG_PASSTHRU, (unsigned long)p);
if (err)
return err;
err |=
return 0;
}
+static void check_ioctl_unit_attention(ctlr_info_t *host, CommandList_struct *c)
+{
+ if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
+ c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION)
+ (void)check_for_unit_attention(host, c);
+}
/*
* ioctl
*/
-static int cciss_ioctl(struct inode *inode, struct file *filep,
+static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
- struct block_device *bdev = inode->i_bdev;
struct gendisk *disk = bdev->bd_disk;
ctlr_info_t *host = get_host(disk);
drive_info_struct *drv = get_drv(disk);
case CCISS_DEREGDISK:
case CCISS_REGNEWD:
case CCISS_REVALIDVOLS:
- return rebuild_lun_table(host, 0);
+ return rebuild_lun_table(host, 0, 1);
case CCISS_GETLUNINFO:{
LogvolInfo_struct luninfo;
- luninfo.LunID = drv->LunID;
+ memcpy(&luninfo.LunID, drv->LunID,
+ sizeof(luninfo.LunID));
luninfo.num_opens = drv->usage_count;
luninfo.num_parts = 0;
if (copy_to_user(argp, &luninfo,
iocommand.buf_size,
PCI_DMA_BIDIRECTIONAL);
+ check_ioctl_unit_attention(host, c);
+
/* Copy the error information out */
iocommand.error_info = *(c->err_info);
if (copy_to_user
(dma_addr_t) temp64.val, buff_size[i],
PCI_DMA_BIDIRECTIONAL);
}
+ check_ioctl_unit_attention(host, c);
/* Copy the error information out */
ioc->error_info = *(c->err_info);
if (copy_to_user(argp, ioc, sizeof(*ioc))) {
case SG_EMULATED_HOST:
case SG_IO:
case SCSI_IOCTL_SEND_COMMAND:
- return scsi_cmd_ioctl(disk->queue, disk,
- filep ? filep->f_mode : 0, cmd, argp);
+ return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, argp);
/* scsi_cmd_ioctl would normally handle these, below, but */
/* they aren't a good fit for cciss, as CD-ROMs are */
/* make sure the disk has been added and the drive is real
* because this can be called from the middle of init_one.
*/
- if (!(h->drv[curr_queue].queue) || !(h->drv[curr_queue].heads))
+ if (!h->drv[curr_queue])
+ continue;
+ if (!(h->drv[curr_queue]->queue) ||
+ !(h->drv[curr_queue]->heads))
continue;
blk_start_queue(h->gendisk[curr_queue]->queue);
printk("Done with %p\n", rq);
#endif /* CCISS_DEBUG */
- if (blk_end_request(rq, (rq->errors == 0) ? 0 : -EIO, blk_rq_bytes(rq)))
- BUG();
+ /* set the residual count for pc requests */
+ if (blk_pc_request(rq))
+ rq->resid_len = cmd->err_info->ResidualCnt;
+
+ blk_end_request_all(rq, (rq->errors == 0) ? 0 : -EIO);
spin_lock_irqsave(&h->lock, flags);
cmd_free(h, cmd, 1);
spin_unlock_irqrestore(&h->lock, flags);
}
+static inline void log_unit_to_scsi3addr(ctlr_info_t *h,
+ unsigned char scsi3addr[], uint32_t log_unit)
+{
+ memcpy(scsi3addr, h->drv[log_unit]->LunID,
+ sizeof(h->drv[log_unit]->LunID));
+}
+
+/* This function gets the SCSI vendor, model, and revision of a logical drive
+ * via the inquiry page 0. Model, vendor, and rev are set to empty strings if
+ * they cannot be read.
+ */
+static void cciss_get_device_descr(int ctlr, int logvol, int withirq,
+ char *vendor, char *model, char *rev)
+{
+ int rc;
+ InquiryData_struct *inq_buf;
+ unsigned char scsi3addr[8];
+
+ *vendor = '\0';
+ *model = '\0';
+ *rev = '\0';
+
+ inq_buf = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL);
+ if (!inq_buf)
+ return;
+
+ log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
+ if (withirq)
+ rc = sendcmd_withirq(CISS_INQUIRY, ctlr, inq_buf,
+ sizeof(InquiryData_struct), 0,
+ scsi3addr, TYPE_CMD);
+ else
+ rc = sendcmd(CISS_INQUIRY, ctlr, inq_buf,
+ sizeof(InquiryData_struct), 0,
+ scsi3addr, TYPE_CMD);
+ if (rc == IO_OK) {
+ memcpy(vendor, &inq_buf->data_byte[8], VENDOR_LEN);
+ vendor[VENDOR_LEN] = '\0';
+ memcpy(model, &inq_buf->data_byte[16], MODEL_LEN);
+ model[MODEL_LEN] = '\0';
+ memcpy(rev, &inq_buf->data_byte[32], REV_LEN);
+ rev[REV_LEN] = '\0';
+ }
+
+ kfree(inq_buf);
+ return;
+}
+
/* This function gets the serial number of a logical drive via
* inquiry page 0x83. Serial no. is 16 bytes. If the serial
* number cannot be had, for whatever reason, 16 bytes of 0xff
#define PAGE_83_INQ_BYTES 64
int rc;
unsigned char *buf;
+ unsigned char scsi3addr[8];
if (buflen > 16)
buflen = 16;
if (!buf)
return;
memset(serial_no, 0, buflen);
+ log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
if (withirq)
rc = sendcmd_withirq(CISS_INQUIRY, ctlr, buf,
- PAGE_83_INQ_BYTES, 1, logvol, 0x83, TYPE_CMD);
+ PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD);
else
rc = sendcmd(CISS_INQUIRY, ctlr, buf,
- PAGE_83_INQ_BYTES, 1, logvol, 0x83, NULL, TYPE_CMD);
+ PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD);
if (rc == IO_OK)
memcpy(serial_no, &buf[8], buflen);
kfree(buf);
return;
}
-static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
+/*
+ * cciss_add_disk sets up the block device queue for a logical drive
+ */
+static int cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
int drv_index)
{
disk->queue = blk_init_queue(do_cciss_request, &h->lock);
+ if (!disk->queue)
+ goto init_queue_failure;
sprintf(disk->disk_name, "cciss/c%dd%d", h->ctlr, drv_index);
disk->major = h->major;
disk->first_minor = drv_index << NWD_SHIFT;
disk->fops = &cciss_fops;
- disk->private_data = &h->drv[drv_index];
+ if (cciss_create_ld_sysfs_entry(h, drv_index))
+ goto cleanup_queue;
+ disk->private_data = h->drv[drv_index];
+ disk->driverfs_dev = &h->drv[drv_index]->dev;
/* Set up queue information */
blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask);
disk->queue->queuedata = h;
- blk_queue_hardsect_size(disk->queue,
- h->drv[drv_index].block_size);
+ blk_queue_logical_block_size(disk->queue,
+ h->drv[drv_index]->block_size);
/* Make sure all queue data is written out before */
- /* setting h->drv[drv_index].queue, as setting this */
+ /* setting h->drv[drv_index]->queue, as setting this */
/* allows the interrupt handler to start the queue */
wmb();
- h->drv[drv_index].queue = disk->queue;
+ h->drv[drv_index]->queue = disk->queue;
add_disk(disk);
+ return 0;
+
+cleanup_queue:
+ blk_cleanup_queue(disk->queue);
+ disk->queue = NULL;
+init_queue_failure:
+ return -1;
}
/* This function will check the usage_count of the drive to be updated/added.
* is also the controller node. Any changes to disk 0 will show up on
* the next reboot.
*/
-static void cciss_update_drive_info(int ctlr, int drv_index, int first_time)
+static void cciss_update_drive_info(int ctlr, int drv_index, int first_time,
+ int via_ioctl)
{
ctlr_info_t *h = hba[ctlr];
struct gendisk *disk;
unsigned long flags = 0;
int ret = 0;
drive_info_struct *drvinfo;
- int was_only_controller_node;
/* Get information about the disk and modify the driver structure */
inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
- drvinfo = kmalloc(sizeof(*drvinfo), GFP_KERNEL);
+ drvinfo = kzalloc(sizeof(*drvinfo), GFP_KERNEL);
if (inq_buff == NULL || drvinfo == NULL)
goto mem_msg;
- /* See if we're trying to update the "controller node"
- * this will happen the when the first logical drive gets
- * created by ACU.
- */
- was_only_controller_node = (drv_index == 0 &&
- h->drv[0].raid_level == -1);
-
/* testing to see if 16-byte CDBs are already being used */
if (h->cciss_read == CCISS_READ_16) {
cciss_read_capacity_16(h->ctlr, drv_index, 1,
drvinfo->block_size = block_size;
drvinfo->nr_blocks = total_size + 1;
+ cciss_get_device_descr(ctlr, drv_index, 1, drvinfo->vendor,
+ drvinfo->model, drvinfo->rev);
cciss_get_serial_no(ctlr, drv_index, 1, drvinfo->serial_no,
sizeof(drvinfo->serial_no));
+ /* Save the lunid in case we deregister the disk, below. */
+ memcpy(drvinfo->LunID, h->drv[drv_index]->LunID,
+ sizeof(drvinfo->LunID));
/* Is it the same disk we already know, and nothing's changed? */
- if (h->drv[drv_index].raid_level != -1 &&
+ if (h->drv[drv_index]->raid_level != -1 &&
((memcmp(drvinfo->serial_no,
- h->drv[drv_index].serial_no, 16) == 0) &&
- drvinfo->block_size == h->drv[drv_index].block_size &&
- drvinfo->nr_blocks == h->drv[drv_index].nr_blocks &&
- drvinfo->heads == h->drv[drv_index].heads &&
- drvinfo->sectors == h->drv[drv_index].sectors &&
- drvinfo->cylinders == h->drv[drv_index].cylinders))
+ h->drv[drv_index]->serial_no, 16) == 0) &&
+ drvinfo->block_size == h->drv[drv_index]->block_size &&
+ drvinfo->nr_blocks == h->drv[drv_index]->nr_blocks &&
+ drvinfo->heads == h->drv[drv_index]->heads &&
+ drvinfo->sectors == h->drv[drv_index]->sectors &&
+ drvinfo->cylinders == h->drv[drv_index]->cylinders))
/* The disk is unchanged, nothing to update */
goto freeret;
* If the disk already exists then deregister it before proceeding
* (unless it's the first disk (for the controller node).
*/
- if (h->drv[drv_index].raid_level != -1 && drv_index != 0) {
+ if (h->drv[drv_index]->raid_level != -1 && drv_index != 0) {
printk(KERN_WARNING "disk %d has changed.\n", drv_index);
spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
- h->drv[drv_index].busy_configuring = 1;
+ h->drv[drv_index]->busy_configuring = 1;
spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
- /* deregister_disk sets h->drv[drv_index].queue = NULL
+ /* deregister_disk sets h->drv[drv_index]->queue = NULL
* which keeps the interrupt handler from starting
* the queue.
*/
- ret = deregister_disk(h->gendisk[drv_index],
- &h->drv[drv_index], 0);
- h->drv[drv_index].busy_configuring = 0;
+ ret = deregister_disk(h, drv_index, 0, via_ioctl);
}
/* If the disk is in use return */
goto freeret;
/* Save the new information from cciss_geometry_inquiry
- * and serial number inquiry.
+ * and serial number inquiry. If the disk was deregistered
+ * above, then h->drv[drv_index] will be NULL.
*/
- h->drv[drv_index].block_size = drvinfo->block_size;
- h->drv[drv_index].nr_blocks = drvinfo->nr_blocks;
- h->drv[drv_index].heads = drvinfo->heads;
- h->drv[drv_index].sectors = drvinfo->sectors;
- h->drv[drv_index].cylinders = drvinfo->cylinders;
- h->drv[drv_index].raid_level = drvinfo->raid_level;
- memcpy(h->drv[drv_index].serial_no, drvinfo->serial_no, 16);
+ if (h->drv[drv_index] == NULL) {
+ drvinfo->device_initialized = 0;
+ h->drv[drv_index] = drvinfo;
+ drvinfo = NULL; /* so it won't be freed below. */
+ } else {
+ /* special case for cxd0 */
+ h->drv[drv_index]->block_size = drvinfo->block_size;
+ h->drv[drv_index]->nr_blocks = drvinfo->nr_blocks;
+ h->drv[drv_index]->heads = drvinfo->heads;
+ h->drv[drv_index]->sectors = drvinfo->sectors;
+ h->drv[drv_index]->cylinders = drvinfo->cylinders;
+ h->drv[drv_index]->raid_level = drvinfo->raid_level;
+ memcpy(h->drv[drv_index]->serial_no, drvinfo->serial_no, 16);
+ memcpy(h->drv[drv_index]->vendor, drvinfo->vendor,
+ VENDOR_LEN + 1);
+ memcpy(h->drv[drv_index]->model, drvinfo->model, MODEL_LEN + 1);
+ memcpy(h->drv[drv_index]->rev, drvinfo->rev, REV_LEN + 1);
+ }
++h->num_luns;
disk = h->gendisk[drv_index];
- set_capacity(disk, h->drv[drv_index].nr_blocks);
+ set_capacity(disk, h->drv[drv_index]->nr_blocks);
/* If it's not disk 0 (drv_index != 0)
* or if it was disk 0, but there was previously
* (raid_leve == -1) then we want to update the
* logical drive's information.
*/
- if (drv_index || first_time)
- cciss_add_disk(h, disk, drv_index);
+ if (drv_index || first_time) {
+ if (cciss_add_disk(h, disk, drv_index) != 0) {
+ cciss_free_gendisk(h, drv_index);
+ cciss_free_drive_info(h, drv_index);
+ printk(KERN_WARNING "cciss:%d could not update "
+ "disk %d\n", h->ctlr, drv_index);
+ --h->num_luns;
+ }
+ }
freeret:
kfree(inq_buff);
}
/* This function will find the first index of the controllers drive array
- * that has a -1 for the raid_level and will return that index. This is
- * where new drives will be added. If the index to be returned is greater
- * than the highest_lun index for the controller then highest_lun is set
- * to this new index. If there are no available indexes then -1 is returned.
- * "controller_node" is used to know if this is a real logical drive, or just
- * the controller node, which determines if this counts towards highest_lun.
+ * that has a null drv pointer and allocate the drive info struct and
+ * will return that index This is where new drives will be added.
+ * If the index to be returned is greater than the highest_lun index for
+ * the controller then highest_lun is set * to this new index.
+ * If there are no available indexes or if tha allocation fails, then -1
+ * is returned. * "controller_node" is used to know if this is a real
+ * logical drive, or just the controller node, which determines if this
+ * counts towards highest_lun.
*/
-static int cciss_find_free_drive_index(int ctlr, int controller_node)
+static int cciss_alloc_drive_info(ctlr_info_t *h, int controller_node)
{
int i;
+ drive_info_struct *drv;
+ /* Search for an empty slot for our drive info */
for (i = 0; i < CISS_MAX_LUN; i++) {
- if (hba[ctlr]->drv[i].raid_level == -1) {
- if (i > hba[ctlr]->highest_lun)
- if (!controller_node)
- hba[ctlr]->highest_lun = i;
+
+ /* if not cxd0 case, and it's occupied, skip it. */
+ if (h->drv[i] && i != 0)
+ continue;
+ /*
+ * If it's cxd0 case, and drv is alloc'ed already, and a
+ * disk is configured there, skip it.
+ */
+ if (i == 0 && h->drv[i] && h->drv[i]->raid_level != -1)
+ continue;
+
+ /*
+ * We've found an empty slot. Update highest_lun
+ * provided this isn't just the fake cxd0 controller node.
+ */
+ if (i > h->highest_lun && !controller_node)
+ h->highest_lun = i;
+
+ /* If adding a real disk at cxd0, and it's already alloc'ed */
+ if (i == 0 && h->drv[i] != NULL)
return i;
- }
+
+ /*
+ * Found an empty slot, not already alloc'ed. Allocate it.
+ * Mark it with raid_level == -1, so we know it's new later on.
+ */
+ drv = kzalloc(sizeof(*drv), GFP_KERNEL);
+ if (!drv)
+ return -1;
+ drv->raid_level = -1; /* so we know it's new */
+ h->drv[i] = drv;
+ return i;
}
return -1;
}
+static void cciss_free_drive_info(ctlr_info_t *h, int drv_index)
+{
+ kfree(h->drv[drv_index]);
+ h->drv[drv_index] = NULL;
+}
+
+static void cciss_free_gendisk(ctlr_info_t *h, int drv_index)
+{
+ put_disk(h->gendisk[drv_index]);
+ h->gendisk[drv_index] = NULL;
+}
+
/* cciss_add_gendisk finds a free hba[]->drv structure
* and allocates a gendisk if needed, and sets the lunid
* in the drvinfo structure. It returns the index into
* a means to talk to the controller in case no logical
* drives have yet been configured.
*/
-static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid, int controller_node)
+static int cciss_add_gendisk(ctlr_info_t *h, unsigned char lunid[],
+ int controller_node)
{
int drv_index;
- drv_index = cciss_find_free_drive_index(h->ctlr, controller_node);
+ drv_index = cciss_alloc_drive_info(h, controller_node);
if (drv_index == -1)
return -1;
+
/*Check if the gendisk needs to be allocated */
if (!h->gendisk[drv_index]) {
h->gendisk[drv_index] =
printk(KERN_ERR "cciss%d: could not "
"allocate a new disk %d\n",
h->ctlr, drv_index);
- return -1;
+ goto err_free_drive_info;
}
}
- h->drv[drv_index].LunID = lunid;
-
+ memcpy(h->drv[drv_index]->LunID, lunid,
+ sizeof(h->drv[drv_index]->LunID));
+ if (cciss_create_ld_sysfs_entry(h, drv_index))
+ goto err_free_disk;
/* Don't need to mark this busy because nobody */
/* else knows about this disk yet to contend */
/* for access to it. */
- h->drv[drv_index].busy_configuring = 0;
+ h->drv[drv_index]->busy_configuring = 0;
wmb();
return drv_index;
+
+err_free_disk:
+ cciss_free_gendisk(h, drv_index);
+err_free_drive_info:
+ cciss_free_drive_info(h, drv_index);
+ return -1;
}
/* This is for the special case of a controller which
if (h->gendisk[0] != NULL) /* already did this? Then bail. */
return;
- drv_index = cciss_add_gendisk(h, 0, 1);
- if (drv_index == -1) {
- printk(KERN_WARNING "cciss%d: could not "
- "add disk 0.\n", h->ctlr);
- return;
- }
- h->drv[drv_index].block_size = 512;
- h->drv[drv_index].nr_blocks = 0;
- h->drv[drv_index].heads = 0;
- h->drv[drv_index].sectors = 0;
- h->drv[drv_index].cylinders = 0;
- h->drv[drv_index].raid_level = -1;
- memset(h->drv[drv_index].serial_no, 0, 16);
+ drv_index = cciss_add_gendisk(h, CTLR_LUNID, 1);
+ if (drv_index == -1)
+ goto error;
+ h->drv[drv_index]->block_size = 512;
+ h->drv[drv_index]->nr_blocks = 0;
+ h->drv[drv_index]->heads = 0;
+ h->drv[drv_index]->sectors = 0;
+ h->drv[drv_index]->cylinders = 0;
+ h->drv[drv_index]->raid_level = -1;
+ memset(h->drv[drv_index]->serial_no, 0, 16);
disk = h->gendisk[drv_index];
- cciss_add_disk(h, disk, drv_index);
+ if (cciss_add_disk(h, disk, drv_index) == 0)
+ return;
+ cciss_free_gendisk(h, drv_index);
+ cciss_free_drive_info(h, drv_index);
+error:
+ printk(KERN_WARNING "cciss%d: could not "
+ "add disk 0.\n", h->ctlr);
+ return;
}
/* This function will add and remove logical drives from the Logical
* INPUT
* h = The controller to perform the operations on
*/
-static int rebuild_lun_table(ctlr_info_t *h, int first_time)
+static int rebuild_lun_table(ctlr_info_t *h, int first_time,
+ int via_ioctl)
{
int ctlr = h->ctlr;
int num_luns;
int i;
int drv_found;
int drv_index = 0;
- __u32 lunid = 0;
+ unsigned char lunid[8] = CTLR_LUNID;
unsigned long flags;
if (!capable(CAP_SYS_RAWIO))
goto mem_msg;
return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
- sizeof(ReportLunData_struct), 0,
- 0, 0, TYPE_CMD);
+ sizeof(ReportLunData_struct),
+ 0, CTLR_LUNID, TYPE_CMD);
if (return_code == IO_OK)
listlength = be32_to_cpu(*(__be32 *) ld_buff->LUNListLength);
for (i = 0; i <= h->highest_lun; i++) {
int j;
drv_found = 0;
+
+ /* skip holes in the array from already deleted drives */
+ if (h->drv[i] == NULL)
+ continue;
+
for (j = 0; j < num_luns; j++) {
- memcpy(&lunid, &ld_buff->LUN[j][0], 4);
- lunid = le32_to_cpu(lunid);
- if (h->drv[i].LunID == lunid) {
+ memcpy(lunid, &ld_buff->LUN[j][0], sizeof(lunid));
+ if (memcmp(h->drv[i]->LunID, lunid,
+ sizeof(lunid)) == 0) {
drv_found = 1;
break;
}
if (!drv_found) {
/* Deregister it from the OS, it's gone. */
spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
- h->drv[i].busy_configuring = 1;
+ h->drv[i]->busy_configuring = 1;
spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
- return_code = deregister_disk(h->gendisk[i],
- &h->drv[i], 1);
- h->drv[i].busy_configuring = 0;
+ return_code = deregister_disk(h, i, 1, via_ioctl);
+ if (h->drv[i] != NULL)
+ h->drv[i]->busy_configuring = 0;
}
}
drv_found = 0;
- memcpy(&lunid, &ld_buff->LUN[i][0], 4);
- lunid = le32_to_cpu(lunid);
-
+ memcpy(lunid, &ld_buff->LUN[i][0], sizeof(lunid));
/* Find if the LUN is already in the drive array
* of the driver. If so then update its info
* if not in use. If it does not exist then find
* the first free index and add it.
*/
for (j = 0; j <= h->highest_lun; j++) {
- if (h->drv[j].raid_level != -1 &&
- h->drv[j].LunID == lunid) {
+ if (h->drv[j] != NULL &&
+ memcmp(h->drv[j]->LunID, lunid,
+ sizeof(h->drv[j]->LunID)) == 0) {
drv_index = j;
drv_found = 1;
break;
if (drv_index == -1)
goto freeret;
}
- cciss_update_drive_info(ctlr, drv_index, first_time);
+ cciss_update_drive_info(ctlr, drv_index, first_time,
+ via_ioctl);
} /* end for */
freeret:
goto freeret;
}
+static void cciss_clear_drive_info(drive_info_struct *drive_info)
+{
+ /* zero out the disk size info */
+ drive_info->nr_blocks = 0;
+ drive_info->block_size = 0;
+ drive_info->heads = 0;
+ drive_info->sectors = 0;
+ drive_info->cylinders = 0;
+ drive_info->raid_level = -1;
+ memset(drive_info->serial_no, 0, sizeof(drive_info->serial_no));
+ memset(drive_info->model, 0, sizeof(drive_info->model));
+ memset(drive_info->rev, 0, sizeof(drive_info->rev));
+ memset(drive_info->vendor, 0, sizeof(drive_info->vendor));
+ /*
+ * don't clear the LUNID though, we need to remember which
+ * one this one is.
+ */
+}
+
/* This function will deregister the disk and it's queue from the
* kernel. It must be called with the controller lock held and the
* drv structures busy_configuring flag set. It's parameters are:
* the disk in preparation for re-adding it. In this case
* the highest_lun should be left unchanged and the LunID
* should not be cleared.
+ * via_ioctl
+ * This indicates whether we've reached this path via ioctl.
+ * This affects the maximum usage count allowed for c0d0 to be messed with.
+ * If this path is reached via ioctl(), then the max_usage_count will
+ * be 1, as the process calling ioctl() has got to have the device open.
+ * If we get here via sysfs, then the max usage count will be zero.
*/
-static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
- int clear_all)
+static int deregister_disk(ctlr_info_t *h, int drv_index,
+ int clear_all, int via_ioctl)
{
int i;
- ctlr_info_t *h = get_host(disk);
+ struct gendisk *disk;
+ drive_info_struct *drv;
+ int recalculate_highest_lun;
if (!capable(CAP_SYS_RAWIO))
return -EPERM;
+ drv = h->drv[drv_index];
+ disk = h->gendisk[drv_index];
+
/* make sure logical volume is NOT is use */
if (clear_all || (h->gendisk[0] == disk)) {
- if (drv->usage_count > 1)
+ if (drv->usage_count > via_ioctl)
return -EBUSY;
} else if (drv->usage_count > 0)
return -EBUSY;
+ recalculate_highest_lun = (drv == h->drv[h->highest_lun]);
+
/* invalidate the devices and deregister the disk. If it is disk
* zero do not deregister it but just zero out it's values. This
* allows us to delete disk zero but keep the controller registered.
*/
if (h->gendisk[0] != disk) {
struct request_queue *q = disk->queue;
- if (disk->flags & GENHD_FL_UP)
+ if (disk->flags & GENHD_FL_UP) {
+ cciss_destroy_ld_sysfs_entry(h, drv_index, 0);
del_gendisk(disk);
- if (q) {
- blk_cleanup_queue(q);
- /* Set drv->queue to NULL so that we do not try
- * to call blk_start_queue on this queue in the
- * interrupt handler
- */
- drv->queue = NULL;
}
+ if (q)
+ blk_cleanup_queue(q);
/* If clear_all is set then we are deleting the logical
* drive, not just refreshing its info. For drives
* other than disk 0 we will call put_disk. We do not
}
} else {
set_capacity(disk, 0);
+ cciss_clear_drive_info(drv);
}
--h->num_luns;
- /* zero out the disk size info */
- drv->nr_blocks = 0;
- drv->block_size = 0;
- drv->heads = 0;
- drv->sectors = 0;
- drv->cylinders = 0;
- drv->raid_level = -1; /* This can be used as a flag variable to
- * indicate that this element of the drive
- * array is free.
- */
-
- if (clear_all) {
- /* check to see if it was the last disk */
- if (drv == h->drv + h->highest_lun) {
- /* if so, find the new hightest lun */
- int i, newhighest = -1;
- for (i = 0; i <= h->highest_lun; i++) {
- /* if the disk has size > 0, it is available */
- if (h->drv[i].heads)
- newhighest = i;
- }
- h->highest_lun = newhighest;
- }
- drv->LunID = 0;
+ /* if it was the last disk, find the new hightest lun */
+ if (clear_all && recalculate_highest_lun) {
+ int i, newhighest = -1;
+ for (i = 0; i <= h->highest_lun; i++) {
+ /* if the disk has size > 0, it is available */
+ if (h->drv[i] && h->drv[i]->heads)
+ newhighest = i;
+ }
+ h->highest_lun = newhighest;
}
return 0;
}
-static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num, /* 0: address the controller,
- 1: address logical volume log_unit,
- 2: periph device address is scsi3addr */
- unsigned int log_unit, __u8 page_code,
- unsigned char *scsi3addr, int cmd_type)
+static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff,
+ size_t size, __u8 page_code, unsigned char *scsi3addr,
+ int cmd_type)
{
ctlr_info_t *h = hba[ctlr];
u64bit buff_dma_handle;
c->Header.SGTotal = 0;
}
c->Header.Tag.lower = c->busaddr;
+ memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8);
c->Request.Type.Type = cmd_type;
if (cmd_type == TYPE_CMD) {
switch (cmd) {
case CISS_INQUIRY:
- /* If the logical unit number is 0 then, this is going
- to controller so It's a physical command
- mode = 0 target = 0. So we have nothing to write.
- otherwise, if use_unit_num == 1,
- mode = 1(volume set addressing) target = LUNID
- otherwise, if use_unit_num == 2,
- mode = 0(periph dev addr) target = scsi3addr */
- if (use_unit_num == 1) {
- c->Header.LUN.LogDev.VolId =
- h->drv[log_unit].LunID;
- c->Header.LUN.LogDev.Mode = 1;
- } else if (use_unit_num == 2) {
- memcpy(c->Header.LUN.LunAddrBytes, scsi3addr,
- 8);
- c->Header.LUN.LogDev.Mode = 0;
- }
/* are we trying to read a vital product page */
if (page_code != 0) {
c->Request.CDB[1] = 0x01;
break;
case CCISS_READ_CAPACITY:
- c->Header.LUN.LogDev.VolId = h->drv[log_unit].LunID;
- c->Header.LUN.LogDev.Mode = 1;
c->Request.CDBLen = 10;
c->Request.Type.Attribute = ATTR_SIMPLE;
c->Request.Type.Direction = XFER_READ;
c->Request.CDB[0] = cmd;
break;
case CCISS_READ_CAPACITY_16:
- c->Header.LUN.LogDev.VolId = h->drv[log_unit].LunID;
- c->Header.LUN.LogDev.Mode = 1;
c->Request.CDBLen = 16;
c->Request.Type.Attribute = ATTR_SIMPLE;
c->Request.Type.Direction = XFER_READ;
c->Request.CDB[0] = BMIC_WRITE;
c->Request.CDB[6] = BMIC_CACHE_FLUSH;
break;
+ case TEST_UNIT_READY:
+ c->Request.CDBLen = 6;
+ c->Request.Type.Attribute = ATTR_SIMPLE;
+ c->Request.Type.Direction = XFER_NONE;
+ c->Request.Timeout = 0;
+ break;
default:
printk(KERN_WARNING
"cciss%d: Unknown Command 0x%c\n", ctlr, cmd);
memcpy(&c->Request.CDB[4], buff, 8);
break;
case 1: /* RESET message */
- c->Request.CDBLen = 12;
+ c->Request.CDBLen = 16;
c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_WRITE;
+ c->Request.Type.Direction = XFER_NONE;
c->Request.Timeout = 0;
memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
c->Request.CDB[0] = cmd; /* reset */
- c->Request.CDB[1] = 0x04; /* reset a LUN */
+ c->Request.CDB[1] = 0x03; /* reset a target */
break;
case 3: /* No-Op message */
c->Request.CDBLen = 1;
return status;
}
-static int sendcmd_withirq(__u8 cmd,
- int ctlr,
- void *buff,
- size_t size,
- unsigned int use_unit_num,
- unsigned int log_unit, __u8 page_code, int cmd_type)
+static int check_target_status(ctlr_info_t *h, CommandList_struct *c)
{
- ctlr_info_t *h = hba[ctlr];
- CommandList_struct *c;
+ switch (c->err_info->ScsiStatus) {
+ case SAM_STAT_GOOD:
+ return IO_OK;
+ case SAM_STAT_CHECK_CONDITION:
+ switch (0xf & c->err_info->SenseInfo[2]) {
+ case 0: return IO_OK; /* no sense */
+ case 1: return IO_OK; /* recovered error */
+ default:
+ printk(KERN_WARNING "cciss%d: cmd 0x%02x "
+ "check condition, sense key = 0x%02x\n",
+ h->ctlr, c->Request.CDB[0],
+ c->err_info->SenseInfo[2]);
+ }
+ break;
+ default:
+ printk(KERN_WARNING "cciss%d: cmd 0x%02x"
+ "scsi status = 0x%02x\n", h->ctlr,
+ c->Request.CDB[0], c->err_info->ScsiStatus);
+ break;
+ }
+ return IO_ERROR;
+}
+
+static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c)
+{
+ int return_status = IO_OK;
+
+ if (c->err_info->CommandStatus == CMD_SUCCESS)
+ return IO_OK;
+
+ switch (c->err_info->CommandStatus) {
+ case CMD_TARGET_STATUS:
+ return_status = check_target_status(h, c);
+ break;
+ case CMD_DATA_UNDERRUN:
+ case CMD_DATA_OVERRUN:
+ /* expected for inquiry and report lun commands */
+ break;
+ case CMD_INVALID:
+ printk(KERN_WARNING "cciss: cmd 0x%02x is "
+ "reported invalid\n", c->Request.CDB[0]);
+ return_status = IO_ERROR;
+ break;
+ case CMD_PROTOCOL_ERR:
+ printk(KERN_WARNING "cciss: cmd 0x%02x has "
+ "protocol error \n", c->Request.CDB[0]);
+ return_status = IO_ERROR;
+ break;
+ case CMD_HARDWARE_ERR:
+ printk(KERN_WARNING "cciss: cmd 0x%02x had "
+ " hardware error\n", c->Request.CDB[0]);
+ return_status = IO_ERROR;
+ break;
+ case CMD_CONNECTION_LOST:
+ printk(KERN_WARNING "cciss: cmd 0x%02x had "
+ "connection lost\n", c->Request.CDB[0]);
+ return_status = IO_ERROR;
+ break;
+ case CMD_ABORTED:
+ printk(KERN_WARNING "cciss: cmd 0x%02x was "
+ "aborted\n", c->Request.CDB[0]);
+ return_status = IO_ERROR;
+ break;
+ case CMD_ABORT_FAILED:
+ printk(KERN_WARNING "cciss: cmd 0x%02x reports "
+ "abort failed\n", c->Request.CDB[0]);
+ return_status = IO_ERROR;
+ break;
+ case CMD_UNSOLICITED_ABORT:
+ printk(KERN_WARNING
+ "cciss%d: unsolicited abort 0x%02x\n", h->ctlr,
+ c->Request.CDB[0]);
+ return_status = IO_NEEDS_RETRY;
+ break;
+ default:
+ printk(KERN_WARNING "cciss: cmd 0x%02x returned "
+ "unknown status %x\n", c->Request.CDB[0],
+ c->err_info->CommandStatus);
+ return_status = IO_ERROR;
+ }
+ return return_status;
+}
+
+static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c,
+ int attempt_retry)
+{
+ DECLARE_COMPLETION_ONSTACK(wait);
u64bit buff_dma_handle;
unsigned long flags;
- int return_status;
- DECLARE_COMPLETION_ONSTACK(wait);
+ int return_status = IO_OK;
- if ((c = cmd_alloc(h, 0)) == NULL)
- return -ENOMEM;
- return_status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num,
- log_unit, page_code, NULL, cmd_type);
- if (return_status != IO_OK) {
- cmd_free(h, c, 0);
- return return_status;
- }
- resend_cmd2:
+resend_cmd2:
c->waiting = &wait;
-
/* Put the request on the tail of the queue and send it */
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
addQ(&h->reqQ, c);
h->Qdepth++;
start_io(h);
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
wait_for_completion(&wait);
- if (c->err_info->CommandStatus != 0) { /* an error has occurred */
- switch (c->err_info->CommandStatus) {
- case CMD_TARGET_STATUS:
- printk(KERN_WARNING "cciss: cmd %p has "
- " completed with errors\n", c);
- if (c->err_info->ScsiStatus) {
- printk(KERN_WARNING "cciss: cmd %p "
- "has SCSI Status = %x\n",
- c, c->err_info->ScsiStatus);
- }
+ if (c->err_info->CommandStatus == 0 || !attempt_retry)
+ goto command_done;
- break;
- case CMD_DATA_UNDERRUN:
- case CMD_DATA_OVERRUN:
- /* expected for inquire and report lun commands */
- break;
- case CMD_INVALID:
- printk(KERN_WARNING "cciss: Cmd %p is "
- "reported invalid\n", c);
- return_status = IO_ERROR;
- break;
- case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: cmd %p has "
- "protocol error \n", c);
- return_status = IO_ERROR;
- break;
- case CMD_HARDWARE_ERR:
- printk(KERN_WARNING "cciss: cmd %p had "
- " hardware error\n", c);
- return_status = IO_ERROR;
- break;
- case CMD_CONNECTION_LOST:
- printk(KERN_WARNING "cciss: cmd %p had "
- "connection lost\n", c);
- return_status = IO_ERROR;
- break;
- case CMD_ABORTED:
- printk(KERN_WARNING "cciss: cmd %p was "
- "aborted\n", c);
- return_status = IO_ERROR;
- break;
- case CMD_ABORT_FAILED:
- printk(KERN_WARNING "cciss: cmd %p reports "
- "abort failed\n", c);
- return_status = IO_ERROR;
- break;
- case CMD_UNSOLICITED_ABORT:
- printk(KERN_WARNING
- "cciss%d: unsolicited abort %p\n", ctlr, c);
- if (c->retry_count < MAX_CMD_RETRIES) {
- printk(KERN_WARNING
- "cciss%d: retrying %p\n", ctlr, c);
- c->retry_count++;
- /* erase the old error information */
- memset(c->err_info, 0,
- sizeof(ErrorInfo_struct));
- return_status = IO_OK;
- INIT_COMPLETION(wait);
- goto resend_cmd2;
- }
- return_status = IO_ERROR;
- break;
- default:
- printk(KERN_WARNING "cciss: cmd %p returned "
- "unknown status %x\n", c,
- c->err_info->CommandStatus);
- return_status = IO_ERROR;
- }
+ return_status = process_sendcmd_error(h, c);
+
+ if (return_status == IO_NEEDS_RETRY &&
+ c->retry_count < MAX_CMD_RETRIES) {
+ printk(KERN_WARNING "cciss%d: retrying 0x%02x\n", h->ctlr,
+ c->Request.CDB[0]);
+ c->retry_count++;
+ /* erase the old error information */
+ memset(c->err_info, 0, sizeof(ErrorInfo_struct));
+ return_status = IO_OK;
+ INIT_COMPLETION(wait);
+ goto resend_cmd2;
}
+
+command_done:
/* unlock the buffers from DMA */
buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val,
c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
+ return return_status;
+}
+
+static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
+ __u8 page_code, unsigned char scsi3addr[],
+ int cmd_type)
+{
+ ctlr_info_t *h = hba[ctlr];
+ CommandList_struct *c;
+ int return_status;
+
+ c = cmd_alloc(h, 0);
+ if (!c)
+ return -ENOMEM;
+ return_status = fill_cmd(c, cmd, ctlr, buff, size, page_code,
+ scsi3addr, cmd_type);
+ if (return_status == IO_OK)
+ return_status = sendcmd_withirq_core(h, c, 1);
+
cmd_free(h, c, 0);
return return_status;
}
{
int return_code;
unsigned long t;
+ unsigned char scsi3addr[8];
memset(inq_buff, 0, sizeof(InquiryData_struct));
+ log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
if (withirq)
return_code = sendcmd_withirq(CISS_INQUIRY, ctlr,
- inq_buff, sizeof(*inq_buff), 1,
- logvol, 0xC1, TYPE_CMD);
+ inq_buff, sizeof(*inq_buff),
+ 0xC1, scsi3addr, TYPE_CMD);
else
return_code = sendcmd(CISS_INQUIRY, ctlr, inq_buff,
- sizeof(*inq_buff), 1, logvol, 0xC1, NULL,
+ sizeof(*inq_buff), 0xC1, scsi3addr,
TYPE_CMD);
if (return_code == IO_OK) {
if (inq_buff->data_byte[8] == 0xFF) {
} else { /* Get geometry failed */
printk(KERN_WARNING "cciss: reading geometry failed\n");
}
- printk(KERN_INFO " heads=%d, sectors=%d, cylinders=%d\n\n",
- drv->heads, drv->sectors, drv->cylinders);
}
static void
{
ReadCapdata_struct *buf;
int return_code;
+ unsigned char scsi3addr[8];
buf = kzalloc(sizeof(ReadCapdata_struct), GFP_KERNEL);
if (!buf) {
return;
}
+ log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
if (withirq)
return_code = sendcmd_withirq(CCISS_READ_CAPACITY,
ctlr, buf, sizeof(ReadCapdata_struct),
- 1, logvol, 0, TYPE_CMD);
+ 0, scsi3addr, TYPE_CMD);
else
return_code = sendcmd(CCISS_READ_CAPACITY,
ctlr, buf, sizeof(ReadCapdata_struct),
- 1, logvol, 0, NULL, TYPE_CMD);
+ 0, scsi3addr, TYPE_CMD);
if (return_code == IO_OK) {
*total_size = be32_to_cpu(*(__be32 *) buf->total_size);
*block_size = be32_to_cpu(*(__be32 *) buf->block_size);
*total_size = 0;
*block_size = BLOCK_SIZE;
}
- if (*total_size != 0)
- printk(KERN_INFO " blocks= %llu block_size= %d\n",
- (unsigned long long)*total_size+1, *block_size);
kfree(buf);
}
{
ReadCapdata_struct_16 *buf;
int return_code;
+ unsigned char scsi3addr[8];
buf = kzalloc(sizeof(ReadCapdata_struct_16), GFP_KERNEL);
if (!buf) {
return;
}
+ log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
if (withirq) {
return_code = sendcmd_withirq(CCISS_READ_CAPACITY_16,
ctlr, buf, sizeof(ReadCapdata_struct_16),
- 1, logvol, 0, TYPE_CMD);
+ 0, scsi3addr, TYPE_CMD);
}
else {
return_code = sendcmd(CCISS_READ_CAPACITY_16,
ctlr, buf, sizeof(ReadCapdata_struct_16),
- 1, logvol, 0, NULL, TYPE_CMD);
+ 0, scsi3addr, TYPE_CMD);
}
if (return_code == IO_OK) {
*total_size = be64_to_cpu(*(__be64 *) buf->total_size);
InquiryData_struct *inq_buff = NULL;
for (logvol = 0; logvol < CISS_MAX_LUN; logvol++) {
- if (h->drv[logvol].LunID == drv->LunID) {
+ if (memcmp(h->drv[logvol]->LunID, drv->LunID,
+ sizeof(drv->LunID)) == 0) {
FOUND = 1;
break;
}
cciss_geometry_inquiry(h->ctlr, logvol, 1, total_size, block_size,
inq_buff, drv);
- blk_queue_hardsect_size(drv->queue, drv->block_size);
+ blk_queue_logical_block_size(drv->queue, drv->block_size);
set_capacity(disk, drv->nr_blocks);
kfree(inq_buff);
return 1;
}
-static int add_sendcmd_reject(__u8 cmd, int ctlr, unsigned long complete)
-{
- /* We get in here if sendcmd() is polling for completions
- and gets some command back that it wasn't expecting --
- something other than that which it just sent down.
- Ordinarily, that shouldn't happen, but it can happen when
- the scsi tape stuff gets into error handling mode, and
- starts using sendcmd() to try to abort commands and
- reset tape drives. In that case, sendcmd may pick up
- completions of commands that were sent to logical drives
- through the block i/o system, or cciss ioctls completing, etc.
- In that case, we need to save those completions for later
- processing by the interrupt handler.
- */
-
-#ifdef CONFIG_CISS_SCSI_TAPE
- struct sendcmd_reject_list *srl = &hba[ctlr]->scsi_rejects;
-
- /* If it's not the scsi tape stuff doing error handling, (abort */
- /* or reset) then we don't expect anything weird. */
- if (cmd != CCISS_RESET_MSG && cmd != CCISS_ABORT_MSG) {
-#endif
- printk(KERN_WARNING "cciss cciss%d: SendCmd "
- "Invalid command list address returned! (%lx)\n",
- ctlr, complete);
- /* not much we can do. */
-#ifdef CONFIG_CISS_SCSI_TAPE
- return 1;
- }
-
- /* We've sent down an abort or reset, but something else
- has completed */
- if (srl->ncompletions >= (hba[ctlr]->nr_cmds + 2)) {
- /* Uh oh. No room to save it for later... */
- printk(KERN_WARNING "cciss%d: Sendcmd: Invalid command addr, "
- "reject list overflow, command lost!\n", ctlr);
- return 1;
- }
- /* Save it for later */
- srl->complete[srl->ncompletions] = complete;
- srl->ncompletions++;
-#endif
- return 0;
-}
-
-/*
- * Send a command to the controller, and wait for it to complete.
- * Only used at init time.
+/* Send command c to controller h and poll for it to complete.
+ * Turns interrupts off on the board. Used at driver init time
+ * and during SCSI error recovery.
*/
-static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num, /* 0: address the controller,
- 1: address logical volume log_unit,
- 2: periph device address is scsi3addr */
- unsigned int log_unit,
- __u8 page_code, unsigned char *scsi3addr, int cmd_type)
+static int sendcmd_core(ctlr_info_t *h, CommandList_struct *c)
{
- CommandList_struct *c;
int i;
unsigned long complete;
- ctlr_info_t *info_p = hba[ctlr];
+ int status = IO_ERROR;
u64bit buff_dma_handle;
- int status, done = 0;
- if ((c = cmd_alloc(info_p, 1)) == NULL) {
- printk(KERN_WARNING "cciss: unable to get memory");
- return IO_ERROR;
- }
- status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num,
- log_unit, page_code, scsi3addr, cmd_type);
- if (status != IO_OK) {
- cmd_free(info_p, c, 1);
- return status;
- }
- resend_cmd1:
- /*
- * Disable interrupt
- */
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: turning intr off\n");
-#endif /* CCISS_DEBUG */
- info_p->access.set_intr_mask(info_p, CCISS_INTR_OFF);
+resend_cmd1:
+
+ /* Disable interrupt on the board. */
+ h->access.set_intr_mask(h, CCISS_INTR_OFF);
/* Make sure there is room in the command FIFO */
/* Actually it should be completely empty at this time */
/* tape side of the driver. */
for (i = 200000; i > 0; i--) {
/* if fifo isn't full go */
- if (!(info_p->access.fifo_full(info_p))) {
-
+ if (!(h->access.fifo_full(h)))
break;
- }
udelay(10);
printk(KERN_WARNING "cciss cciss%d: SendCmd FIFO full,"
- " waiting!\n", ctlr);
+ " waiting!\n", h->ctlr);
}
- /*
- * Send the cmd
- */
- info_p->access.submit_command(info_p, c);
- done = 0;
+ h->access.submit_command(h, c); /* Send the cmd */
do {
- complete = pollcomplete(ctlr);
+ complete = pollcomplete(h->ctlr);
#ifdef CCISS_DEBUG
printk(KERN_DEBUG "cciss: command completed\n");
if (complete == 1) {
printk(KERN_WARNING
"cciss cciss%d: SendCmd Timeout out, "
- "No command list address returned!\n", ctlr);
+ "No command list address returned!\n", h->ctlr);
status = IO_ERROR;
- done = 1;
break;
}
- /* This will need to change for direct lookup completions */
- if ((complete & CISS_ERROR_BIT)
- && (complete & ~CISS_ERROR_BIT) == c->busaddr) {
- /* if data overrun or underun on Report command
- ignore it
- */
- if (((c->Request.CDB[0] == CISS_REPORT_LOG) ||
- (c->Request.CDB[0] == CISS_REPORT_PHYS) ||
- (c->Request.CDB[0] == CISS_INQUIRY)) &&
- ((c->err_info->CommandStatus ==
- CMD_DATA_OVERRUN) ||
- (c->err_info->CommandStatus == CMD_DATA_UNDERRUN)
- )) {
- complete = c->busaddr;
- } else {
- if (c->err_info->CommandStatus ==
- CMD_UNSOLICITED_ABORT) {
- printk(KERN_WARNING "cciss%d: "
- "unsolicited abort %p\n",
- ctlr, c);
- if (c->retry_count < MAX_CMD_RETRIES) {
- printk(KERN_WARNING
- "cciss%d: retrying %p\n",
- ctlr, c);
- c->retry_count++;
- /* erase the old error */
- /* information */
- memset(c->err_info, 0,
- sizeof
- (ErrorInfo_struct));
- goto resend_cmd1;
- } else {
- printk(KERN_WARNING
- "cciss%d: retried %p too "
- "many times\n", ctlr, c);
- status = IO_ERROR;
- goto cleanup1;
- }
- } else if (c->err_info->CommandStatus ==
- CMD_UNABORTABLE) {
- printk(KERN_WARNING
- "cciss%d: command could not be aborted.\n",
- ctlr);
- status = IO_ERROR;
- goto cleanup1;
- }
- printk(KERN_WARNING "ciss ciss%d: sendcmd"
- " Error %x \n", ctlr,
- c->err_info->CommandStatus);
- printk(KERN_WARNING "ciss ciss%d: sendcmd"
- " offensive info\n"
- " size %x\n num %x value %x\n",
- ctlr,
- c->err_info->MoreErrInfo.Invalid_Cmd.
- offense_size,
- c->err_info->MoreErrInfo.Invalid_Cmd.
- offense_num,
- c->err_info->MoreErrInfo.Invalid_Cmd.
- offense_value);
- status = IO_ERROR;
- goto cleanup1;
- }
+ /* Make sure it's the command we're expecting. */
+ if ((complete & ~CISS_ERROR_BIT) != c->busaddr) {
+ printk(KERN_WARNING "cciss%d: Unexpected command "
+ "completion.\n", h->ctlr);
+ continue;
+ }
+
+ /* It is our command. If no error, we're done. */
+ if (!(complete & CISS_ERROR_BIT)) {
+ status = IO_OK;
+ break;
+ }
+
+ /* There is an error... */
+
+ /* if data overrun or underun on Report command ignore it */
+ if (((c->Request.CDB[0] == CISS_REPORT_LOG) ||
+ (c->Request.CDB[0] == CISS_REPORT_PHYS) ||
+ (c->Request.CDB[0] == CISS_INQUIRY)) &&
+ ((c->err_info->CommandStatus == CMD_DATA_OVERRUN) ||
+ (c->err_info->CommandStatus == CMD_DATA_UNDERRUN))) {
+ complete = c->busaddr;
+ status = IO_OK;
+ break;
}
- /* This will need changing for direct lookup completions */
- if (complete != c->busaddr) {
- if (add_sendcmd_reject(cmd, ctlr, complete) != 0) {
- BUG(); /* we are pretty much hosed if we get here. */
+
+ if (c->err_info->CommandStatus == CMD_UNSOLICITED_ABORT) {
+ printk(KERN_WARNING "cciss%d: unsolicited abort %p\n",
+ h->ctlr, c);
+ if (c->retry_count < MAX_CMD_RETRIES) {
+ printk(KERN_WARNING "cciss%d: retrying %p\n",
+ h->ctlr, c);
+ c->retry_count++;
+ /* erase the old error information */
+ memset(c->err_info, 0, sizeof(c->err_info));
+ goto resend_cmd1;
}
- continue;
- } else
- done = 1;
- } while (!done);
+ printk(KERN_WARNING "cciss%d: retried %p too many "
+ "times\n", h->ctlr, c);
+ status = IO_ERROR;
+ break;
+ }
+
+ if (c->err_info->CommandStatus == CMD_UNABORTABLE) {
+ printk(KERN_WARNING "cciss%d: command could not be "
+ "aborted.\n", h->ctlr);
+ status = IO_ERROR;
+ break;
+ }
+
+ if (c->err_info->CommandStatus == CMD_TARGET_STATUS) {
+ status = check_target_status(h, c);
+ break;
+ }
+
+ printk(KERN_WARNING "cciss%d: sendcmd error\n", h->ctlr);
+ printk(KERN_WARNING "cmd = 0x%02x, CommandStatus = 0x%02x\n",
+ c->Request.CDB[0], c->err_info->CommandStatus);
+ status = IO_ERROR;
+ break;
+
+ } while (1);
- cleanup1:
/* unlock the data buffer from DMA */
buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
- pci_unmap_single(info_p->pdev, (dma_addr_t) buff_dma_handle.val,
+ pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val,
c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
-#ifdef CONFIG_CISS_SCSI_TAPE
- /* if we saved some commands for later, process them now. */
- if (info_p->scsi_rejects.ncompletions > 0)
- do_cciss_intr(0, info_p);
-#endif
- cmd_free(info_p, c, 1);
+ return status;
+}
+
+/*
+ * Send a command to the controller, and wait for it to complete.
+ * Used at init time, and during SCSI error recovery.
+ */
+static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size,
+ __u8 page_code, unsigned char *scsi3addr, int cmd_type)
+{
+ CommandList_struct *c;
+ int status;
+
+ c = cmd_alloc(hba[ctlr], 1);
+ if (!c) {
+ printk(KERN_WARNING "cciss: unable to get memory");
+ return IO_ERROR;
+ }
+ status = fill_cmd(c, cmd, ctlr, buff, size, page_code,
+ scsi3addr, cmd_type);
+ if (status == IO_OK)
+ status = sendcmd_core(hba[ctlr], c);
+ cmd_free(hba[ctlr], c, 1);
return status;
}
{
CommandList_struct *c;
- while ((c = h->reqQ) != NULL) {
+ while (!hlist_empty(&h->reqQ)) {
+ c = hlist_entry(h->reqQ.first, CommandList_struct, list);
/* can't do anything if fifo is full */
if ((h->access.fifo_full(h))) {
printk(KERN_WARNING "cciss: fifo full\n");
}
/* Get the first entry from the Request Q */
- removeQ(&(h->reqQ), c);
+ removeQ(c);
h->Qdepth--;
/* Tell the controller execute command */
h->access.submit_command(h, c);
/* Put job onto the completed Q */
- addQ(&(h->cmpQ), c);
+ addQ(&h->cmpQ, c);
}
}
memset(c->err_info, 0, sizeof(ErrorInfo_struct));
/* add it to software queue and then send it to the controller */
- addQ(&(h->reqQ), c);
+ addQ(&h->reqQ, c);
h->Qdepth++;
if (h->Qdepth > h->maxQsinceinit)
h->maxQsinceinit = h->Qdepth;
((driver_byte & 0xff) << 24);
}
-static inline int evaluate_target_status(CommandList_struct *cmd)
+static inline int evaluate_target_status(ctlr_info_t *h,
+ CommandList_struct *cmd, int *retry_cmd)
{
unsigned char sense_key;
unsigned char status_byte, msg_byte, host_byte, driver_byte;
int error_value;
+ *retry_cmd = 0;
/* If we get in here, it means we got "target status", that is, scsi status */
status_byte = cmd->err_info->ScsiStatus;
driver_byte = DRIVER_OK;
if (((sense_key == 0x0) || (sense_key == 0x1)) && !blk_pc_request(cmd->rq))
error_value = 0;
+ if (check_for_unit_attention(h, cmd)) {
+ *retry_cmd = !blk_pc_request(cmd->rq);
+ return 0;
+ }
+
if (!blk_pc_request(cmd->rq)) { /* Not SG_IO or similar? */
if (error_value != 0)
printk(KERN_WARNING "cciss: cmd %p has CHECK CONDITION"
switch (cmd->err_info->CommandStatus) {
case CMD_TARGET_STATUS:
- rq->errors = evaluate_target_status(cmd);
+ rq->errors = evaluate_target_status(h, cmd, &retry_cmd);
break;
case CMD_DATA_UNDERRUN:
if (blk_fs_request(cmd->rq)) {
printk(KERN_WARNING "cciss: cmd %p has"
" completed with data underrun "
"reported\n", cmd);
- cmd->rq->data_len = cmd->err_info->ResidualCnt;
+ cmd->rq->resid_len = cmd->err_info->ResidualCnt;
}
break;
case CMD_DATA_OVERRUN:
goto startio;
queue:
- creq = elv_next_request(q);
+ creq = blk_peek_request(q);
if (!creq)
goto startio;
if ((c = cmd_alloc(h, 1)) == NULL)
goto full;
- blkdev_dequeue_request(creq);
+ blk_start_request(creq);
spin_unlock_irq(q->queue_lock);
/* The first 2 bits are reserved for controller error reporting. */
c->Header.Tag.lower = (c->cmdindex << 3);
c->Header.Tag.lower |= 0x04; /* flag for direct lookup. */
- c->Header.LUN.LogDev.VolId = drv->LunID;
- c->Header.LUN.LogDev.Mode = 1;
+ memcpy(&c->Header.LUN, drv->LunID, sizeof(drv->LunID));
c->Request.CDBLen = 10; // 12 byte commands not in FW yet;
c->Request.Type.Type = TYPE_CMD; // It is a command.
c->Request.Type.Attribute = ATTR_SIMPLE;
c->Request.Timeout = 0; // Don't time out
c->Request.CDB[0] =
(rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
- start_blk = creq->sector;
+ start_blk = blk_rq_pos(creq);
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n", (int)creq->sector,
- (int)creq->nr_sectors);
+ printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n",
+ (int)blk_rq_pos(creq), (int)blk_rq_sectors(creq));
#endif /* CCISS_DEBUG */
sg_init_table(tmp_sg, MAXSGENTRIES);
h->maxSG = seg;
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: Submitting %d sectors in %d segments\n",
- creq->nr_sectors, seg);
+ printk(KERN_DEBUG "cciss: Submitting %u sectors in %d segments\n",
+ blk_rq_sectors(creq), seg);
#endif /* CCISS_DEBUG */
c->Header.SGList = c->Header.SGTotal = seg;
c->Request.CDB[4] = (start_blk >> 8) & 0xff;
c->Request.CDB[5] = start_blk & 0xff;
c->Request.CDB[6] = 0; // (sect >> 24) & 0xff; MSB
- c->Request.CDB[7] = (creq->nr_sectors >> 8) & 0xff;
- c->Request.CDB[8] = creq->nr_sectors & 0xff;
+ c->Request.CDB[7] = (blk_rq_sectors(creq) >> 8) & 0xff;
+ c->Request.CDB[8] = blk_rq_sectors(creq) & 0xff;
c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0;
} else {
u32 upper32 = upper_32_bits(start_blk);
c->Request.CDB[7]= (start_blk >> 16) & 0xff;
c->Request.CDB[8]= (start_blk >> 8) & 0xff;
c->Request.CDB[9]= start_blk & 0xff;
- c->Request.CDB[10]= (creq->nr_sectors >> 24) & 0xff;
- c->Request.CDB[11]= (creq->nr_sectors >> 16) & 0xff;
- c->Request.CDB[12]= (creq->nr_sectors >> 8) & 0xff;
- c->Request.CDB[13]= creq->nr_sectors & 0xff;
+ c->Request.CDB[10]= (blk_rq_sectors(creq) >> 24) & 0xff;
+ c->Request.CDB[11]= (blk_rq_sectors(creq) >> 16) & 0xff;
+ c->Request.CDB[12]= (blk_rq_sectors(creq) >> 8) & 0xff;
+ c->Request.CDB[13]= blk_rq_sectors(creq) & 0xff;
c->Request.CDB[14] = c->Request.CDB[15] = 0;
}
} else if (blk_pc_request(creq)) {
spin_lock_irq(q->queue_lock);
- addQ(&(h->reqQ), c);
+ addQ(&h->reqQ, c);
h->Qdepth++;
if (h->Qdepth > h->maxQsinceinit)
h->maxQsinceinit = h->Qdepth;
static inline unsigned long get_next_completion(ctlr_info_t *h)
{
-#ifdef CONFIG_CISS_SCSI_TAPE
- /* Any rejects from sendcmd() lying around? Process them first */
- if (h->scsi_rejects.ncompletions == 0)
- return h->access.command_completed(h);
- else {
- struct sendcmd_reject_list *srl;
- int n;
- srl = &h->scsi_rejects;
- n = --srl->ncompletions;
- /* printk("cciss%d: processing saved reject\n", h->ctlr); */
- printk("p");
- return srl->complete[n];
- }
-#else
return h->access.command_completed(h);
-#endif
}
static inline int interrupt_pending(ctlr_info_t *h)
{
-#ifdef CONFIG_CISS_SCSI_TAPE
- return (h->access.intr_pending(h)
- || (h->scsi_rejects.ncompletions > 0));
-#else
return h->access.intr_pending(h);
-#endif
}
static inline long interrupt_not_for_us(ctlr_info_t *h)
{
-#ifdef CONFIG_CISS_SCSI_TAPE
- return (((h->access.intr_pending(h) == 0) ||
- (h->interrupts_enabled == 0))
- && (h->scsi_rejects.ncompletions == 0));
-#else
return (((h->access.intr_pending(h) == 0) ||
(h->interrupts_enabled == 0)));
-#endif
}
static irqreturn_t do_cciss_intr(int irq, void *dev_id)
a = c->busaddr;
} else {
+ struct hlist_node *tmp;
+
a &= ~3;
- if ((c = h->cmpQ) == NULL) {
- printk(KERN_WARNING
- "cciss: Completion of %08x ignored\n",
- a1);
- continue;
- }
- while (c->busaddr != a) {
- c = c->next;
- if (c == h->cmpQ)
+ c = NULL;
+ hlist_for_each_entry(c, tmp, &h->cmpQ, list) {
+ if (c->busaddr == a)
break;
}
}
* If we've found the command, take it off the
* completion Q and free it
*/
- if (c->busaddr == a) {
- removeQ(&h->cmpQ, c);
+ if (c && c->busaddr == a) {
+ removeQ(c);
if (c->cmd_type == CMD_RWREQ) {
complete_command(h, c, 0);
} else if (c->cmd_type == CMD_IOCTL_PEND) {
return IRQ_HANDLED;
}
+/**
+ * add_to_scan_list() - add controller to rescan queue
+ * @h: Pointer to the controller.
+ *
+ * Adds the controller to the rescan queue if not already on the queue.
+ *
+ * returns 1 if added to the queue, 0 if skipped (could be on the
+ * queue already, or the controller could be initializing or shutting
+ * down).
+ **/
+static int add_to_scan_list(struct ctlr_info *h)
+{
+ struct ctlr_info *test_h;
+ int found = 0;
+ int ret = 0;
+
+ if (h->busy_initializing)
+ return 0;
+
+ if (!mutex_trylock(&h->busy_shutting_down))
+ return 0;
+
+ mutex_lock(&scan_mutex);
+ list_for_each_entry(test_h, &scan_q, scan_list) {
+ if (test_h == h) {
+ found = 1;
+ break;
+ }
+ }
+ if (!found && !h->busy_scanning) {
+ INIT_COMPLETION(h->scan_wait);
+ list_add_tail(&h->scan_list, &scan_q);
+ ret = 1;
+ }
+ mutex_unlock(&scan_mutex);
+ mutex_unlock(&h->busy_shutting_down);
+
+ return ret;
+}
+
+/**
+ * remove_from_scan_list() - remove controller from rescan queue
+ * @h: Pointer to the controller.
+ *
+ * Removes the controller from the rescan queue if present. Blocks if
+ * the controller is currently conducting a rescan.
+ **/
+static void remove_from_scan_list(struct ctlr_info *h)
+{
+ struct ctlr_info *test_h, *tmp_h;
+ int scanning = 0;
+
+ mutex_lock(&scan_mutex);
+ list_for_each_entry_safe(test_h, tmp_h, &scan_q, scan_list) {
+ if (test_h == h) {
+ list_del(&h->scan_list);
+ complete_all(&h->scan_wait);
+ mutex_unlock(&scan_mutex);
+ return;
+ }
+ }
+ if (&h->busy_scanning)
+ scanning = 0;
+ mutex_unlock(&scan_mutex);
+
+ if (scanning)
+ wait_for_completion(&h->scan_wait);
+}
+
+/**
+ * scan_thread() - kernel thread used to rescan controllers
+ * @data: Ignored.
+ *
+ * A kernel thread used scan for drive topology changes on
+ * controllers. The thread processes only one controller at a time
+ * using a queue. Controllers are added to the queue using
+ * add_to_scan_list() and removed from the queue either after done
+ * processing or using remove_from_scan_list().
+ *
+ * returns 0.
+ **/
+static int scan_thread(void *data)
+{
+ struct ctlr_info *h;
+
+ while (1) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule();
+ if (kthread_should_stop())
+ break;
+
+ while (1) {
+ mutex_lock(&scan_mutex);
+ if (list_empty(&scan_q)) {
+ mutex_unlock(&scan_mutex);
+ break;
+ }
+
+ h = list_entry(scan_q.next,
+ struct ctlr_info,
+ scan_list);
+ list_del(&h->scan_list);
+ h->busy_scanning = 1;
+ mutex_unlock(&scan_mutex);
+
+ if (h) {
+ rebuild_lun_table(h, 0, 0);
+ complete_all(&h->scan_wait);
+ mutex_lock(&scan_mutex);
+ h->busy_scanning = 0;
+ mutex_unlock(&scan_mutex);
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c)
+{
+ if (c->err_info->SenseInfo[2] != UNIT_ATTENTION)
+ return 0;
+
+ switch (c->err_info->SenseInfo[12]) {
+ case STATE_CHANGED:
+ printk(KERN_WARNING "cciss%d: a state change "
+ "detected, command retried\n", h->ctlr);
+ return 1;
+ break;
+ case LUN_FAILED:
+ printk(KERN_WARNING "cciss%d: LUN failure "
+ "detected, action required\n", h->ctlr);
+ return 1;
+ break;
+ case REPORT_LUNS_CHANGED:
+ printk(KERN_WARNING "cciss%d: report LUN data "
+ "changed\n", h->ctlr);
+ add_to_scan_list(h);
+ wake_up_process(cciss_scan_thread);
+ return 1;
+ break;
+ case POWER_OR_RESET:
+ printk(KERN_WARNING "cciss%d: a power on "
+ "or device reset detected\n", h->ctlr);
+ return 1;
+ break;
+ case UNIT_ATTENTION_CLEARED:
+ printk(KERN_WARNING "cciss%d: unit attention "
+ "cleared by another initiator\n", h->ctlr);
+ return 1;
+ break;
+ default:
+ printk(KERN_WARNING "cciss%d: unknown "
+ "unit attention detected\n", h->ctlr);
+ return 1;
+ }
+}
+
/*
* We cannot read the structure directly, for portability we must use
* the io functions.
__u64 cfg_offset;
__u32 cfg_base_addr;
__u64 cfg_base_addr_index;
- int i, err;
+ int i, prod_index, err;
+
+ subsystem_vendor_id = pdev->subsystem_vendor;
+ subsystem_device_id = pdev->subsystem_device;
+ board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
+ subsystem_vendor_id);
+
+ for (i = 0; i < ARRAY_SIZE(products); i++) {
+ /* Stand aside for hpsa driver on request */
+ if (cciss_allow_hpsa && products[i].board_id == HPSA_BOUNDARY)
+ return -ENODEV;
+ if (board_id == products[i].board_id)
+ break;
+ }
+ prod_index = i;
+ if (prod_index == ARRAY_SIZE(products)) {
+ dev_warn(&pdev->dev,
+ "unrecognized board ID: 0x%08lx, ignoring.\n",
+ (unsigned long) board_id);
+ return -ENODEV;
+ }
/* check to see if controller has been disabled */
/* BEFORE trying to enable it */
return err;
}
- subsystem_vendor_id = pdev->subsystem_vendor;
- subsystem_device_id = pdev->subsystem_device;
- board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
- subsystem_vendor_id);
-
#ifdef CCISS_DEBUG
printk("command = %x\n", command);
printk("irq = %x\n", pdev->irq);
*/
cciss_interrupt_mode(c, pdev, board_id);
- /*
- * Memory base addr is first addr , the second points to the config
- * table
- */
+ /* find the memory BAR */
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ if (pci_resource_flags(pdev, i) & IORESOURCE_MEM)
+ break;
+ }
+ if (i == DEVICE_COUNT_RESOURCE) {
+ printk(KERN_WARNING "cciss: No memory BAR found\n");
+ err = -ENODEV;
+ goto err_out_free_res;
+ }
+
+ c->paddr = pci_resource_start(pdev, i); /* addressing mode bits
+ * already removed
+ */
- c->paddr = pci_resource_start(pdev, 0); /* addressing mode bits already removed */
#ifdef CCISS_DEBUG
- printk("address 0 = %x\n", c->paddr);
+ printk("address 0 = %lx\n", c->paddr);
#endif /* CCISS_DEBUG */
c->vaddr = remap_pci_mem(c->paddr, 0x250);
if (scratchpad == CCISS_FIRMWARE_READY)
break;
set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(HZ / 10); /* wait 100ms */
+ schedule_timeout(msecs_to_jiffies(100)); /* wait 100ms */
}
if (scratchpad != CCISS_FIRMWARE_READY) {
printk(KERN_WARNING "cciss: Board not ready. Timed out.\n");
#endif /* CCISS_DEBUG */
cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr);
#ifdef CCISS_DEBUG
- printk("cfg base address index = %x\n", cfg_base_addr_index);
+ printk("cfg base address index = %llx\n",
+ (unsigned long long)cfg_base_addr_index);
#endif /* CCISS_DEBUG */
if (cfg_base_addr_index == -1) {
printk(KERN_WARNING "cciss: Cannot find cfg_base_addr_index\n");
cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET);
#ifdef CCISS_DEBUG
- printk("cfg offset = %x\n", cfg_offset);
+ printk("cfg offset = %llx\n", (unsigned long long)cfg_offset);
#endif /* CCISS_DEBUG */
c->cfgtable = remap_pci_mem(pci_resource_start(pdev,
cfg_base_addr_index) +
* leave a little room for ioctl calls.
*/
c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
- for (i = 0; i < ARRAY_SIZE(products); i++) {
- if (board_id == products[i].board_id) {
- c->product_name = products[i].product_name;
- c->access = *(products[i].access);
- c->nr_cmds = c->max_commands - 4;
- break;
- }
- }
+ c->product_name = products[prod_index].product_name;
+ c->access = *(products[prod_index].access);
+ c->nr_cmds = c->max_commands - 4;
if ((readb(&c->cfgtable->Signature[0]) != 'C') ||
(readb(&c->cfgtable->Signature[1]) != 'I') ||
(readb(&c->cfgtable->Signature[2]) != 'S') ||
err = -ENODEV;
goto err_out_free_res;
}
- /* We didn't find the controller in our list. We know the
- * signature is valid. If it's an HP device let's try to
- * bind to the device and fire it up. Otherwise we bail.
- */
- if (i == ARRAY_SIZE(products)) {
- if (subsystem_vendor_id == PCI_VENDOR_ID_HP) {
- c->product_name = products[i-1].product_name;
- c->access = *(products[i-1].access);
- c->nr_cmds = c->max_commands - 4;
- printk(KERN_WARNING "cciss: This is an unknown "
- "Smart Array controller.\n"
- "cciss: Please update to the latest driver "
- "available from www.hp.com.\n");
- } else {
- printk(KERN_WARNING "cciss: Sorry, I don't know how"
- " to access the Smart Array controller %08lx\n"
- , (unsigned long)board_id);
- err = -ENODEV;
- goto err_out_free_res;
- }
- }
#ifdef CONFIG_X86
{
/* Need to enable prefetch in the SCSI core for 6400 in x86 */
break;
/* delay and try again */
set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(10);
+ schedule_timeout(msecs_to_jiffies(1));
}
#ifdef CCISS_DEBUG
return -1;
}
-static void free_hba(int i)
+static void free_hba(int n)
+{
+ ctlr_info_t *h = hba[n];
+ int i;
+
+ hba[n] = NULL;
+ for (i = 0; i < h->highest_lun + 1; i++)
+ if (h->gendisk[i] != NULL)
+ put_disk(h->gendisk[i]);
+ kfree(h);
+}
+
+/* Send a message CDB to the firmware. */
+static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, unsigned char type)
+{
+ typedef struct {
+ CommandListHeader_struct CommandHeader;
+ RequestBlock_struct Request;
+ ErrDescriptor_struct ErrorDescriptor;
+ } Command;
+ static const size_t cmd_sz = sizeof(Command) + sizeof(ErrorInfo_struct);
+ Command *cmd;
+ dma_addr_t paddr64;
+ uint32_t paddr32, tag;
+ void __iomem *vaddr;
+ int i, err;
+
+ vaddr = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+ if (vaddr == NULL)
+ return -ENOMEM;
+
+ /* The Inbound Post Queue only accepts 32-bit physical addresses for the
+ CCISS commands, so they must be allocated from the lower 4GiB of
+ memory. */
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ iounmap(vaddr);
+ return -ENOMEM;
+ }
+
+ cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64);
+ if (cmd == NULL) {
+ iounmap(vaddr);
+ return -ENOMEM;
+ }
+
+ /* This must fit, because of the 32-bit consistent DMA mask. Also,
+ although there's no guarantee, we assume that the address is at
+ least 4-byte aligned (most likely, it's page-aligned). */
+ paddr32 = paddr64;
+
+ cmd->CommandHeader.ReplyQueue = 0;
+ cmd->CommandHeader.SGList = 0;
+ cmd->CommandHeader.SGTotal = 0;
+ cmd->CommandHeader.Tag.lower = paddr32;
+ cmd->CommandHeader.Tag.upper = 0;
+ memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8);
+
+ cmd->Request.CDBLen = 16;
+ cmd->Request.Type.Type = TYPE_MSG;
+ cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE;
+ cmd->Request.Type.Direction = XFER_NONE;
+ cmd->Request.Timeout = 0; /* Don't time out */
+ cmd->Request.CDB[0] = opcode;
+ cmd->Request.CDB[1] = type;
+ memset(&cmd->Request.CDB[2], 0, 14); /* the rest of the CDB is reserved */
+
+ cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(Command);
+ cmd->ErrorDescriptor.Addr.upper = 0;
+ cmd->ErrorDescriptor.Len = sizeof(ErrorInfo_struct);
+
+ writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET);
+
+ for (i = 0; i < 10; i++) {
+ tag = readl(vaddr + SA5_REPLY_PORT_OFFSET);
+ if ((tag & ~3) == paddr32)
+ break;
+ schedule_timeout_uninterruptible(HZ);
+ }
+
+ iounmap(vaddr);
+
+ /* we leak the DMA buffer here ... no choice since the controller could
+ still complete the command. */
+ if (i == 10) {
+ printk(KERN_ERR "cciss: controller message %02x:%02x timed out\n",
+ opcode, type);
+ return -ETIMEDOUT;
+ }
+
+ pci_free_consistent(pdev, cmd_sz, cmd, paddr64);
+
+ if (tag & 2) {
+ printk(KERN_ERR "cciss: controller message %02x:%02x failed\n",
+ opcode, type);
+ return -EIO;
+ }
+
+ printk(KERN_INFO "cciss: controller message %02x:%02x succeeded\n",
+ opcode, type);
+ return 0;
+}
+
+#define cciss_soft_reset_controller(p) cciss_message(p, 1, 0)
+#define cciss_noop(p) cciss_message(p, 3, 0)
+
+static __devinit int cciss_reset_msi(struct pci_dev *pdev)
+{
+/* the #defines are stolen from drivers/pci/msi.h. */
+#define msi_control_reg(base) (base + PCI_MSI_FLAGS)
+#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
+
+ int pos;
+ u16 control = 0;
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
+ if (pos) {
+ pci_read_config_word(pdev, msi_control_reg(pos), &control);
+ if (control & PCI_MSI_FLAGS_ENABLE) {
+ printk(KERN_INFO "cciss: resetting MSI\n");
+ pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE);
+ }
+ }
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
+ if (pos) {
+ pci_read_config_word(pdev, msi_control_reg(pos), &control);
+ if (control & PCI_MSIX_FLAGS_ENABLE) {
+ printk(KERN_INFO "cciss: resetting MSI-X\n");
+ pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE);
+ }
+ }
+
+ return 0;
+}
+
+/* This does a hard reset of the controller using PCI power management
+ * states. */
+static __devinit int cciss_hard_reset_controller(struct pci_dev *pdev)
{
- ctlr_info_t *p = hba[i];
- int n;
+ u16 pmcsr, saved_config_space[32];
+ int i, pos;
+
+ printk(KERN_INFO "cciss: using PCI PM to reset controller\n");
+
+ /* This is very nearly the same thing as
+
+ pci_save_state(pci_dev);
+ pci_set_power_state(pci_dev, PCI_D3hot);
+ pci_set_power_state(pci_dev, PCI_D0);
+ pci_restore_state(pci_dev);
- hba[i] = NULL;
- for (n = 0; n < CISS_MAX_LUN; n++)
- put_disk(p->gendisk[n]);
- kfree(p);
+ but we can't use these nice canned kernel routines on
+ kexec, because they also check the MSI/MSI-X state in PCI
+ configuration space and do the wrong thing when it is
+ set/cleared. Also, the pci_save/restore_state functions
+ violate the ordering requirements for restoring the
+ configuration space from the CCISS document (see the
+ comment below). So we roll our own .... */
+
+ for (i = 0; i < 32; i++)
+ pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (pos == 0) {
+ printk(KERN_ERR "cciss_reset_controller: PCI PM not supported\n");
+ return -ENODEV;
+ }
+
+ /* Quoting from the Open CISS Specification: "The Power
+ * Management Control/Status Register (CSR) controls the power
+ * state of the device. The normal operating state is D0,
+ * CSR=00h. The software off state is D3, CSR=03h. To reset
+ * the controller, place the interface device in D3 then to
+ * D0, this causes a secondary PCI reset which will reset the
+ * controller." */
+
+ /* enter the D3hot power management state */
+ pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ pmcsr |= PCI_D3hot;
+ pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+
+ schedule_timeout_uninterruptible(HZ >> 1);
+
+ /* enter the D0 power management state */
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ pmcsr |= PCI_D0;
+ pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+
+ schedule_timeout_uninterruptible(HZ >> 1);
+
+ /* Restore the PCI configuration space. The Open CISS
+ * Specification says, "Restore the PCI Configuration
+ * Registers, offsets 00h through 60h. It is important to
+ * restore the command register, 16-bits at offset 04h,
+ * last. Do not restore the configuration status register,
+ * 16-bits at offset 06h." Note that the offset is 2*i. */
+ for (i = 0; i < 32; i++) {
+ if (i == 2 || i == 3)
+ continue;
+ pci_write_config_word(pdev, 2*i, saved_config_space[i]);
+ }
+ wmb();
+ pci_write_config_word(pdev, 4, saved_config_space[2]);
+
+ return 0;
}
/*
int i;
int j = 0;
int rc;
- int dac;
+ int dac, return_code;
+ InquiryData_struct *inq_buff;
+
+ if (reset_devices) {
+ /* Reset the controller with a PCI power-cycle */
+ if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev))
+ return -ENODEV;
+
+ /* Now try to get the controller to respond to a no-op. Some
+ devices (notably the HP Smart Array 5i Controller) need
+ up to 30 seconds to respond. */
+ for (i=0; i<30; i++) {
+ if (cciss_noop(pdev) == 0)
+ break;
+
+ schedule_timeout_uninterruptible(HZ);
+ }
+ if (i == 30) {
+ printk(KERN_ERR "cciss: controller seems dead\n");
+ return -EBUSY;
+ }
+ }
i = alloc_cciss_hba();
if (i < 0)
return -1;
hba[i]->busy_initializing = 1;
+ INIT_HLIST_HEAD(&hba[i]->cmpQ);
+ INIT_HLIST_HEAD(&hba[i]->reqQ);
+ mutex_init(&hba[i]->busy_shutting_down);
if (cciss_pci_init(hba[i], pdev) != 0)
- goto clean1;
+ goto clean_no_release_regions;
sprintf(hba[i]->devname, "cciss%d", i);
hba[i]->ctlr = i;
hba[i]->pdev = pdev;
+ init_completion(&hba[i]->scan_wait);
+
+ if (cciss_create_hba_sysfs_entry(hba[i]))
+ goto clean0;
+
/* configure PCI DMA stuff */
- if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK))
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
dac = 1;
- else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK))
+ else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))
dac = 0;
else {
printk(KERN_ERR "cciss: no suitable DMA available\n");
printk(KERN_ERR "cciss: out of memory");
goto clean4;
}
-#ifdef CONFIG_CISS_SCSI_TAPE
- hba[i]->scsi_rejects.complete =
- kmalloc(sizeof(hba[i]->scsi_rejects.complete[0]) *
- (hba[i]->nr_cmds + 5), GFP_KERNEL);
- if (hba[i]->scsi_rejects.complete == NULL) {
- printk(KERN_ERR "cciss: out of memory");
- goto clean4;
- }
-#endif
spin_lock_init(&hba[i]->lock);
/* Initialize the pdev driver private data.
hba[i]->num_luns = 0;
hba[i]->highest_lun = -1;
for (j = 0; j < CISS_MAX_LUN; j++) {
- hba[i]->drv[j].raid_level = -1;
- hba[i]->drv[j].queue = NULL;
+ hba[i]->drv[j] = NULL;
hba[i]->gendisk[j] = NULL;
}
/* Turn the interrupts on so we can service requests */
hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON);
+ /* Get the firmware version */
+ inq_buff = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL);
+ if (inq_buff == NULL) {
+ printk(KERN_ERR "cciss: out of memory\n");
+ goto clean4;
+ }
+
+ return_code = sendcmd_withirq(CISS_INQUIRY, i, inq_buff,
+ sizeof(InquiryData_struct), 0, CTLR_LUNID, TYPE_CMD);
+ if (return_code == IO_OK) {
+ hba[i]->firm_ver[0] = inq_buff->data_byte[32];
+ hba[i]->firm_ver[1] = inq_buff->data_byte[33];
+ hba[i]->firm_ver[2] = inq_buff->data_byte[34];
+ hba[i]->firm_ver[3] = inq_buff->data_byte[35];
+ } else { /* send command failed */
+ printk(KERN_WARNING "cciss: unable to determine firmware"
+ " version of controller\n");
+ }
+ kfree(inq_buff);
+
cciss_procinit(i);
hba[i]->cciss_max_sectors = 2048;
+ rebuild_lun_table(hba[i], 1, 0);
hba[i]->busy_initializing = 0;
-
- rebuild_lun_table(hba[i], 1);
return 1;
clean4:
-#ifdef CONFIG_CISS_SCSI_TAPE
- kfree(hba[i]->scsi_rejects.complete);
-#endif
kfree(hba[i]->cmd_pool_bits);
if (hba[i]->cmd_pool)
pci_free_consistent(hba[i]->pdev,
clean2:
unregister_blkdev(hba[i]->major, hba[i]->devname);
clean1:
+ cciss_destroy_hba_sysfs_entry(hba[i]);
+clean0:
+ pci_release_regions(pdev);
+clean_no_release_regions:
hba[i]->busy_initializing = 0;
- /* cleanup any queues that may have been initialized */
- for (j=0; j <= hba[i]->highest_lun; j++){
- drive_info_struct *drv = &(hba[i]->drv[j]);
- if (drv->queue)
- blk_cleanup_queue(drv->queue);
- }
+
/*
* Deliberately omit pci_disable_device(): it does something nasty to
* Smart Array controllers that pci_enable_device does not undo
*/
- pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
free_hba(i);
return -1;
/* sendcmd will turn off interrupt, and send the flush...
* To write all data in the battery backed cache to disks */
memset(flush_buf, 0, 4);
- return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0, 0, 0, NULL,
- TYPE_CMD);
+ return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0,
+ CTLR_LUNID, TYPE_CMD);
if (return_code == IO_OK) {
printk(KERN_INFO "Completed flushing cache on controller %d\n", i);
} else {
printk(KERN_ERR "cciss: Unable to remove device \n");
return;
}
+
tmp_ptr = pci_get_drvdata(pdev);
i = tmp_ptr->ctlr;
if (hba[i] == NULL) {
return;
}
+ mutex_lock(&hba[i]->busy_shutting_down);
+
+ remove_from_scan_list(hba[i]);
remove_proc_entry(hba[i]->devname, proc_cciss);
unregister_blkdev(hba[i]->major, hba[i]->devname);
if (disk) {
struct request_queue *q = disk->queue;
- if (disk->flags & GENHD_FL_UP)
+ if (disk->flags & GENHD_FL_UP) {
+ cciss_destroy_ld_sysfs_entry(hba[i], j, 1);
del_gendisk(disk);
+ }
if (q)
blk_cleanup_queue(q);
}
pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle);
kfree(hba[i]->cmd_pool_bits);
-#ifdef CONFIG_CISS_SCSI_TAPE
- kfree(hba[i]->scsi_rejects.complete);
-#endif
/*
* Deliberately omit pci_disable_device(): it does something nasty to
* Smart Array controllers that pci_enable_device does not undo
*/
pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
+ cciss_destroy_hba_sysfs_entry(hba[i]);
+ mutex_unlock(&hba[i]->busy_shutting_down);
free_hba(i);
}
*/
static int __init cciss_init(void)
{
+ int err;
+
+ /*
+ * The hardware requires that commands are aligned on a 64-bit
+ * boundary. Given that we use pci_alloc_consistent() to allocate an
+ * array of them, the size must be a multiple of 8 bytes.
+ */
+ BUILD_BUG_ON(sizeof(CommandList_struct) % 8);
+
printk(KERN_INFO DRIVER_NAME "\n");
+ err = bus_register(&cciss_bus_type);
+ if (err)
+ return err;
+
+ /* Start the scan thread */
+ cciss_scan_thread = kthread_run(scan_thread, NULL, "cciss_scan");
+ if (IS_ERR(cciss_scan_thread)) {
+ err = PTR_ERR(cciss_scan_thread);
+ goto err_bus_unregister;
+ }
+
/* Register for our PCI devices */
- return pci_register_driver(&cciss_pci_driver);
+ err = pci_register_driver(&cciss_pci_driver);
+ if (err)
+ goto err_thread_stop;
+
+ return err;
+
+err_thread_stop:
+ kthread_stop(cciss_scan_thread);
+err_bus_unregister:
+ bus_unregister(&cciss_bus_type);
+
+ return err;
}
static void __exit cciss_cleanup(void)
cciss_remove_one(hba[i]->pdev);
}
}
+ kthread_stop(cciss_scan_thread);
remove_proc_entry("driver/cciss", NULL);
+ bus_unregister(&cciss_bus_type);
}
static void fail_all_cmds(unsigned long ctlr)
pci_disable_device(h->pdev); /* Make sure it is really dead. */
/* move everything off the request queue onto the completed queue */
- while ((c = h->reqQ) != NULL) {
- removeQ(&(h->reqQ), c);
+ while (!hlist_empty(&h->reqQ)) {
+ c = hlist_entry(h->reqQ.first, CommandList_struct, list);
+ removeQ(c);
h->Qdepth--;
- addQ(&(h->cmpQ), c);
+ addQ(&h->cmpQ, c);
}
/* Now, fail everything on the completed queue with a HW error */
- while ((c = h->cmpQ) != NULL) {
- removeQ(&h->cmpQ, c);
- c->err_info->CommandStatus = CMD_HARDWARE_ERR;
+ while (!hlist_empty(&h->cmpQ)) {
+ c = hlist_entry(h->cmpQ.first, CommandList_struct, list);
+ removeQ(c);
+ if (c->cmd_type != CMD_MSG_STALE)
+ c->err_info->CommandStatus = CMD_HARDWARE_ERR;
if (c->cmd_type == CMD_RWREQ) {
complete_command(h, c, 0);
} else if (c->cmd_type == CMD_IOCTL_PEND)