/*
- * Disk Array driver for HP SA 5xxx and 6xxx Controllers
- * Copyright 2000, 2006 Hewlett-Packard Development Company, L.P.
+ * Disk Array driver for HP Smart Array controllers.
+ * (C) Copyright 2000, 2007 Hewlett-Packard Development Company, L.P.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more details.
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA.
*
* Questions/Comments/Bugfixes to iss_storagedev@hp.com
*
#include <linux/blkpg.h>
#include <linux/timer.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/hdreg.h>
#include <linux/spinlock.h>
#include <scsi/sg.h>
#include <scsi/scsi_ioctl.h>
#include <linux/cdrom.h>
+#include <linux/scatterlist.h>
#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
-#define DRIVER_NAME "HP CISS Driver (v 3.6.14)"
-#define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,14)
+#define DRIVER_NAME "HP CISS Driver (v 3.6.20)"
+#define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 20)
/* Embedded module documentation macros - see modules.h */
MODULE_AUTHOR("Hewlett-Packard Company");
-MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.14");
+MODULE_DESCRIPTION("Driver for HP Smart Array Controllers");
MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
- " SA6i P600 P800 P400 P400i E200 E200i E500");
-MODULE_VERSION("3.6.14");
+ " SA6i P600 P800 P400 P400i E200 E200i E500 P700m"
+ " Smart Array G2 Series SAS/SATA Controllers");
+MODULE_VERSION("3.6.20");
MODULE_LICENSE("GPL");
#include "cciss_cmd.h"
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3237},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324A},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324B},
{PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
/* board_id = Subsystem Device ID & Vendor ID
* product = Marketing Name for the board
* access = Address of the struct of function pointers
- * nr_cmds = Number of commands supported by controller
*/
static struct board_type products[] = {
- {0x40700E11, "Smart Array 5300", &SA5_access, 512},
- {0x40800E11, "Smart Array 5i", &SA5B_access, 512},
- {0x40820E11, "Smart Array 532", &SA5B_access, 512},
- {0x40830E11, "Smart Array 5312", &SA5B_access, 512},
- {0x409A0E11, "Smart Array 641", &SA5_access, 512},
- {0x409B0E11, "Smart Array 642", &SA5_access, 512},
- {0x409C0E11, "Smart Array 6400", &SA5_access, 512},
- {0x409D0E11, "Smart Array 6400 EM", &SA5_access, 512},
- {0x40910E11, "Smart Array 6i", &SA5_access, 512},
- {0x3225103C, "Smart Array P600", &SA5_access, 512},
- {0x3223103C, "Smart Array P800", &SA5_access, 512},
- {0x3234103C, "Smart Array P400", &SA5_access, 512},
- {0x3235103C, "Smart Array P400i", &SA5_access, 512},
- {0x3211103C, "Smart Array E200i", &SA5_access, 120},
- {0x3212103C, "Smart Array E200", &SA5_access, 120},
- {0x3213103C, "Smart Array E200i", &SA5_access, 120},
- {0x3214103C, "Smart Array E200i", &SA5_access, 120},
- {0x3215103C, "Smart Array E200i", &SA5_access, 120},
- {0x3237103C, "Smart Array E500", &SA5_access, 512},
- {0x323D103C, "Smart Array P700m", &SA5_access, 512},
- {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120},
+ {0x40700E11, "Smart Array 5300", &SA5_access},
+ {0x40800E11, "Smart Array 5i", &SA5B_access},
+ {0x40820E11, "Smart Array 532", &SA5B_access},
+ {0x40830E11, "Smart Array 5312", &SA5B_access},
+ {0x409A0E11, "Smart Array 641", &SA5_access},
+ {0x409B0E11, "Smart Array 642", &SA5_access},
+ {0x409C0E11, "Smart Array 6400", &SA5_access},
+ {0x409D0E11, "Smart Array 6400 EM", &SA5_access},
+ {0x40910E11, "Smart Array 6i", &SA5_access},
+ {0x3225103C, "Smart Array P600", &SA5_access},
+ {0x3223103C, "Smart Array P800", &SA5_access},
+ {0x3234103C, "Smart Array P400", &SA5_access},
+ {0x3235103C, "Smart Array P400i", &SA5_access},
+ {0x3211103C, "Smart Array E200i", &SA5_access},
+ {0x3212103C, "Smart Array E200", &SA5_access},
+ {0x3213103C, "Smart Array E200i", &SA5_access},
+ {0x3214103C, "Smart Array E200i", &SA5_access},
+ {0x3215103C, "Smart Array E200i", &SA5_access},
+ {0x3237103C, "Smart Array E500", &SA5_access},
+ {0x323D103C, "Smart Array P700m", &SA5_access},
+ {0x3241103C, "Smart Array P212", &SA5_access},
+ {0x3243103C, "Smart Array P410", &SA5_access},
+ {0x3245103C, "Smart Array P410i", &SA5_access},
+ {0x3247103C, "Smart Array P411", &SA5_access},
+ {0x3249103C, "Smart Array P812", &SA5_access},
+ {0x324A103C, "Smart Array P712m", &SA5_access},
+ {0x324B103C, "Smart Array P711m", &SA5_access},
+ {0xFFFF103C, "Unknown Smart Array", &SA5_access},
};
/* How long to wait (in milliseconds) for board to go into simple mode */
/*define how many times we will try a command because of bus resets */
#define MAX_CMD_RETRIES 3
-#define READ_AHEAD 1024
#define MAX_CTLR 32
/* Originally cciss driver only supports 8 major numbers */
static void do_cciss_request(struct request_queue *q);
static irqreturn_t do_cciss_intr(int irq, void *dev_id);
-static int cciss_open(struct inode *inode, struct file *filep);
-static int cciss_release(struct inode *inode, struct file *filep);
-static int cciss_ioctl(struct inode *inode, struct file *filep,
+static int cciss_open(struct block_device *bdev, fmode_t mode);
+static int cciss_release(struct gendisk *disk, fmode_t mode);
+static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg);
static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
static int cciss_revalidate(struct gendisk *disk);
-static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk);
-static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
+static int rebuild_lun_table(ctlr_info_t *h, int first_time);
+static int deregister_disk(ctlr_info_t *h, int drv_index,
int clear_all);
static void cciss_read_capacity(int ctlr, int logvol, int withirq,
int withirq, sector_t total_size,
unsigned int block_size, InquiryData_struct *inq_buff,
drive_info_struct *drv);
-static void cciss_getgeometry(int cntl_num);
static void __devinit cciss_interrupt_mode(ctlr_info_t *, struct pci_dev *,
__u32);
static void start_io(ctlr_info_t *h);
static void fail_all_cmds(unsigned long ctlr);
#ifdef CONFIG_PROC_FS
-static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
- int length, int *eof, void *data);
static void cciss_procinit(int i);
#else
static void cciss_procinit(int i)
#endif /* CONFIG_PROC_FS */
#ifdef CONFIG_COMPAT
-static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg);
+static int cciss_compat_ioctl(struct block_device *, fmode_t,
+ unsigned, unsigned long);
#endif
static struct block_device_operations cciss_fops = {
.owner = THIS_MODULE,
.open = cciss_open,
.release = cciss_release,
- .ioctl = cciss_ioctl,
+ .locked_ioctl = cciss_ioctl,
.getgeo = cciss_getgeo,
#ifdef CONFIG_COMPAT
.compat_ioctl = cciss_compat_ioctl,
/*
* Enqueuing and dequeuing functions for cmdlists.
*/
-static inline void addQ(CommandList_struct **Qptr, CommandList_struct *c)
+static inline void addQ(struct hlist_head *list, CommandList_struct *c)
{
- if (*Qptr == NULL) {
- *Qptr = c;
- c->next = c->prev = c;
- } else {
- c->prev = (*Qptr)->prev;
- c->next = (*Qptr);
- (*Qptr)->prev->next = c;
- (*Qptr)->prev = c;
- }
+ hlist_add_head(&c->list, list);
}
-static inline CommandList_struct *removeQ(CommandList_struct **Qptr,
- CommandList_struct *c)
+static inline void removeQ(CommandList_struct *c)
{
- if (c && c->next != c) {
- if (*Qptr == c)
- *Qptr = c->next;
- c->prev->next = c->next;
- c->next->prev = c->prev;
- } else {
- *Qptr = NULL;
- }
- return c;
+ if (WARN_ON(hlist_unhashed(&c->list)))
+ return;
+
+ hlist_del_init(&c->list);
}
#include "cciss_scsi.c" /* For SCSI tape support */
*/
#define ENG_GIG 1000000000
#define ENG_GIG_FACTOR (ENG_GIG/512)
+#define ENGAGE_SCSI "engage scsi"
static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
"UNKNOWN"
};
static struct proc_dir_entry *proc_cciss;
-static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
- int length, int *eof, void *data)
+static void cciss_seq_show_header(struct seq_file *seq)
{
- off_t pos = 0;
- off_t len = 0;
- int size, i, ctlr;
- ctlr_info_t *h = (ctlr_info_t *) data;
- drive_info_struct *drv;
- unsigned long flags;
- sector_t vol_sz, vol_sz_frac;
+ ctlr_info_t *h = seq->private;
+
+ seq_printf(seq, "%s: HP %s Controller\n"
+ "Board ID: 0x%08lx\n"
+ "Firmware Version: %c%c%c%c\n"
+ "IRQ: %d\n"
+ "Logical drives: %d\n"
+ "Current Q depth: %d\n"
+ "Current # commands on controller: %d\n"
+ "Max Q depth since init: %d\n"
+ "Max # commands on controller since init: %d\n"
+ "Max SG entries since init: %d\n",
+ h->devname,
+ h->product_name,
+ (unsigned long)h->board_id,
+ h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
+ h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT],
+ h->num_luns,
+ h->Qdepth, h->commands_outstanding,
+ h->maxQsinceinit, h->max_outstanding, h->maxSG);
+
+#ifdef CONFIG_CISS_SCSI_TAPE
+ cciss_seq_tape_report(seq, h->ctlr);
+#endif /* CONFIG_CISS_SCSI_TAPE */
+}
- ctlr = h->ctlr;
+static void *cciss_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ ctlr_info_t *h = seq->private;
+ unsigned ctlr = h->ctlr;
+ unsigned long flags;
/* prevent displaying bogus info during configuration
* or deconfiguration of a logical volume
spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
if (h->busy_configuring) {
spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- return -EBUSY;
+ return ERR_PTR(-EBUSY);
}
h->busy_configuring = 1;
spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- size = sprintf(buffer, "%s: HP %s Controller\n"
- "Board ID: 0x%08lx\n"
- "Firmware Version: %c%c%c%c\n"
- "IRQ: %d\n"
- "Logical drives: %d\n"
- "Max sectors: %d\n"
- "Current Q depth: %d\n"
- "Current # commands on controller: %d\n"
- "Max Q depth since init: %d\n"
- "Max # commands on controller since init: %d\n"
- "Max SG entries since init: %d\n\n",
- h->devname,
- h->product_name,
- (unsigned long)h->board_id,
- h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
- h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT],
- h->num_luns,
- h->cciss_max_sectors,
- h->Qdepth, h->commands_outstanding,
- h->maxQsinceinit, h->max_outstanding, h->maxSG);
-
- pos += size;
- len += size;
- cciss_proc_tape_report(ctlr, buffer, &pos, &len);
- for (i = 0; i <= h->highest_lun; i++) {
+ if (*pos == 0)
+ cciss_seq_show_header(seq);
- drv = &h->drv[i];
- if (drv->heads == 0)
- continue;
+ return pos;
+}
- vol_sz = drv->nr_blocks;
- vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR);
- vol_sz_frac *= 100;
- sector_div(vol_sz_frac, ENG_GIG_FACTOR);
+static int cciss_seq_show(struct seq_file *seq, void *v)
+{
+ sector_t vol_sz, vol_sz_frac;
+ ctlr_info_t *h = seq->private;
+ unsigned ctlr = h->ctlr;
+ loff_t *pos = v;
+ drive_info_struct *drv = &h->drv[*pos];
+
+ if (*pos > h->highest_lun)
+ return 0;
+
+ if (drv->heads == 0)
+ return 0;
+
+ vol_sz = drv->nr_blocks;
+ vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR);
+ vol_sz_frac *= 100;
+ sector_div(vol_sz_frac, ENG_GIG_FACTOR);
+
+ if (drv->raid_level > 5)
+ drv->raid_level = RAID_UNKNOWN;
+ seq_printf(seq, "cciss/c%dd%d:"
+ "\t%4u.%02uGB\tRAID %s\n",
+ ctlr, (int) *pos, (int)vol_sz, (int)vol_sz_frac,
+ raid_label[drv->raid_level]);
+ return 0;
+}
+
+static void *cciss_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ ctlr_info_t *h = seq->private;
+
+ if (*pos > h->highest_lun)
+ return NULL;
+ *pos += 1;
+
+ return pos;
+}
+
+static void cciss_seq_stop(struct seq_file *seq, void *v)
+{
+ ctlr_info_t *h = seq->private;
+
+ /* Only reset h->busy_configuring if we succeeded in setting
+ * it during cciss_seq_start. */
+ if (v == ERR_PTR(-EBUSY))
+ return;
- if (drv->raid_level > 5)
- drv->raid_level = RAID_UNKNOWN;
- size = sprintf(buffer + len, "cciss/c%dd%d:"
- "\t%4u.%02uGB\tRAID %s\n",
- ctlr, i, (int)vol_sz, (int)vol_sz_frac,
- raid_label[drv->raid_level]);
- pos += size;
- len += size;
- }
-
- *eof = 1;
- *start = buffer + offset;
- len -= offset;
- if (len > length)
- len = length;
h->busy_configuring = 0;
- return len;
}
-static int
-cciss_proc_write(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+static struct seq_operations cciss_seq_ops = {
+ .start = cciss_seq_start,
+ .show = cciss_seq_show,
+ .next = cciss_seq_next,
+ .stop = cciss_seq_stop,
+};
+
+static int cciss_seq_open(struct inode *inode, struct file *file)
{
- unsigned char cmd[80];
- int len;
-#ifdef CONFIG_CISS_SCSI_TAPE
- ctlr_info_t *h = (ctlr_info_t *) data;
- int rc;
+ int ret = seq_open(file, &cciss_seq_ops);
+ struct seq_file *seq = file->private_data;
+
+ if (!ret)
+ seq->private = PDE(inode)->data;
+
+ return ret;
+}
+
+static ssize_t
+cciss_proc_write(struct file *file, const char __user *buf,
+ size_t length, loff_t *ppos)
+{
+ int err;
+ char *buffer;
+
+#ifndef CONFIG_CISS_SCSI_TAPE
+ return -EINVAL;
#endif
- if (count > sizeof(cmd) - 1)
+ if (!buf || length > PAGE_SIZE - 1)
return -EINVAL;
- if (copy_from_user(cmd, buffer, count))
- return -EFAULT;
- cmd[count] = '\0';
- len = strlen(cmd); // above 3 lines ensure safety
- if (len && cmd[len - 1] == '\n')
- cmd[--len] = '\0';
-# ifdef CONFIG_CISS_SCSI_TAPE
- if (strcmp("engage scsi", cmd) == 0) {
+
+ buffer = (char *)__get_free_page(GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ err = -EFAULT;
+ if (copy_from_user(buffer, buf, length))
+ goto out;
+ buffer[length] = '\0';
+
+#ifdef CONFIG_CISS_SCSI_TAPE
+ if (strncmp(ENGAGE_SCSI, buffer, sizeof ENGAGE_SCSI - 1) == 0) {
+ struct seq_file *seq = file->private_data;
+ ctlr_info_t *h = seq->private;
+ int rc;
+
rc = cciss_engage_scsi(h->ctlr);
if (rc != 0)
- return -rc;
- return count;
- }
+ err = -rc;
+ else
+ err = length;
+ } else
+#endif /* CONFIG_CISS_SCSI_TAPE */
+ err = -EINVAL;
/* might be nice to have "disengage" too, but it's not
safely possible. (only 1 module use count, lock issues.) */
-# endif
- return -EINVAL;
+
+out:
+ free_page((unsigned long)buffer);
+ return err;
}
-/*
- * Get us a file in /proc/cciss that says something about each controller.
- * Create /proc/cciss if it doesn't exist yet.
- */
+static struct file_operations cciss_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = cciss_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+ .write = cciss_proc_write,
+};
+
static void __devinit cciss_procinit(int i)
{
struct proc_dir_entry *pde;
- if (proc_cciss == NULL) {
- proc_cciss = proc_mkdir("cciss", proc_root_driver);
- if (!proc_cciss)
- return;
- }
-
- pde = create_proc_read_entry(hba[i]->devname,
- S_IWUSR | S_IRUSR | S_IRGRP | S_IROTH,
- proc_cciss, cciss_proc_get_info, hba[i]);
- pde->write_proc = cciss_proc_write;
+ if (proc_cciss == NULL)
+ proc_cciss = proc_mkdir("driver/cciss", NULL);
+ if (!proc_cciss)
+ return;
+ pde = proc_create_data(hba[i]->devname, S_IWUSR | S_IRUSR | S_IRGRP |
+ S_IROTH, proc_cciss,
+ &cciss_proc_fops, hba[i]);
}
#endif /* CONFIG_PROC_FS */
c->cmdindex = i;
}
+ INIT_HLIST_NODE(&c->list);
c->busaddr = (__u32) cmd_dma_handle;
temp64.val = (__u64) err_dma_handle;
c->ErrDesc.Addr.lower = temp64.val32.lower;
/*
* Open. Make sure the device is really there.
*/
-static int cciss_open(struct inode *inode, struct file *filep)
+static int cciss_open(struct block_device *bdev, fmode_t mode)
{
- ctlr_info_t *host = get_host(inode->i_bdev->bd_disk);
- drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk);
+ ctlr_info_t *host = get_host(bdev->bd_disk);
+ drive_info_struct *drv = get_drv(bdev->bd_disk);
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss_open %s\n", inode->i_bdev->bd_disk->disk_name);
+ printk(KERN_DEBUG "cciss_open %s\n", bdev->bd_disk->disk_name);
#endif /* CCISS_DEBUG */
if (host->busy_initializing || drv->busy_configuring)
* for "raw controller".
*/
if (drv->heads == 0) {
- if (iminor(inode) != 0) { /* not node 0? */
+ if (MINOR(bdev->bd_dev) != 0) { /* not node 0? */
/* if not node 0 make sure it is a partition = 0 */
- if (iminor(inode) & 0x0f) {
+ if (MINOR(bdev->bd_dev) & 0x0f) {
return -ENXIO;
/* if it is, make sure we have a LUN ID */
} else if (drv->LunID == 0) {
/*
* Close. Sync first.
*/
-static int cciss_release(struct inode *inode, struct file *filep)
+static int cciss_release(struct gendisk *disk, fmode_t mode)
{
- ctlr_info_t *host = get_host(inode->i_bdev->bd_disk);
- drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk);
+ ctlr_info_t *host = get_host(disk);
+ drive_info_struct *drv = get_drv(disk);
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss_release %s\n",
- inode->i_bdev->bd_disk->disk_name);
+ printk(KERN_DEBUG "cciss_release %s\n", disk->disk_name);
#endif /* CCISS_DEBUG */
drv->usage_count--;
#ifdef CONFIG_COMPAT
-static int do_ioctl(struct file *f, unsigned cmd, unsigned long arg)
+static int do_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned cmd, unsigned long arg)
{
int ret;
lock_kernel();
- ret = cciss_ioctl(f->f_path.dentry->d_inode, f, cmd, arg);
+ ret = cciss_ioctl(bdev, mode, cmd, arg);
unlock_kernel();
return ret;
}
-static int cciss_ioctl32_passthru(struct file *f, unsigned cmd,
- unsigned long arg);
-static int cciss_ioctl32_big_passthru(struct file *f, unsigned cmd,
- unsigned long arg);
+static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode,
+ unsigned cmd, unsigned long arg);
+static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode,
+ unsigned cmd, unsigned long arg);
-static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg)
+static int cciss_compat_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned cmd, unsigned long arg)
{
switch (cmd) {
case CCISS_GETPCIINFO:
case CCISS_REGNEWD:
case CCISS_RESCANDISK:
case CCISS_GETLUNINFO:
- return do_ioctl(f, cmd, arg);
+ return do_ioctl(bdev, mode, cmd, arg);
case CCISS_PASSTHRU32:
- return cciss_ioctl32_passthru(f, cmd, arg);
+ return cciss_ioctl32_passthru(bdev, mode, cmd, arg);
case CCISS_BIG_PASSTHRU32:
- return cciss_ioctl32_big_passthru(f, cmd, arg);
+ return cciss_ioctl32_big_passthru(bdev, mode, cmd, arg);
default:
return -ENOIOCTLCMD;
}
}
-static int cciss_ioctl32_passthru(struct file *f, unsigned cmd,
- unsigned long arg)
+static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode,
+ unsigned cmd, unsigned long arg)
{
IOCTL32_Command_struct __user *arg32 =
(IOCTL32_Command_struct __user *) arg;
if (err)
return -EFAULT;
- err = do_ioctl(f, CCISS_PASSTHRU, (unsigned long)p);
+ err = do_ioctl(bdev, mode, CCISS_PASSTHRU, (unsigned long)p);
if (err)
return err;
err |=
return err;
}
-static int cciss_ioctl32_big_passthru(struct file *file, unsigned cmd,
- unsigned long arg)
+static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode,
+ unsigned cmd, unsigned long arg)
{
BIG_IOCTL32_Command_struct __user *arg32 =
(BIG_IOCTL32_Command_struct __user *) arg;
if (err)
return -EFAULT;
- err = do_ioctl(file, CCISS_BIG_PASSTHRU, (unsigned long)p);
+ err = do_ioctl(bdev, mode, CCISS_BIG_PASSTHRU, (unsigned long)p);
if (err)
return err;
err |=
/*
* ioctl
*/
-static int cciss_ioctl(struct inode *inode, struct file *filep,
+static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
- struct block_device *bdev = inode->i_bdev;
struct gendisk *disk = bdev->bd_disk;
ctlr_info_t *host = get_host(disk);
drive_info_struct *drv = get_drv(disk);
return 0;
}
+ case CCISS_DEREGDISK:
+ case CCISS_REGNEWD:
case CCISS_REVALIDVOLS:
- return rebuild_lun_table(host, NULL);
+ return rebuild_lun_table(host, 0);
case CCISS_GETLUNINFO:{
LogvolInfo_struct luninfo;
return -EFAULT;
return 0;
}
- case CCISS_DEREGDISK:
- return rebuild_lun_table(host, disk);
-
- case CCISS_REGNEWD:
- return rebuild_lun_table(host, NULL);
-
case CCISS_PASSTHRU:
{
IOCTL_Command_struct iocommand;
if (ioc->Request.Type.Direction == XFER_WRITE) {
if (copy_from_user
(buff[sg_used], data_ptr, sz)) {
- status = -ENOMEM;
+ status = -EFAULT;
goto cleanup1;
}
} else {
case SG_EMULATED_HOST:
case SG_IO:
case SCSI_IOCTL_SEND_COMMAND:
- return scsi_cmd_ioctl(filep, disk->queue, disk, cmd, argp);
+ return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, argp);
/* scsi_cmd_ioctl would normally handle these, below, but */
/* they aren't a good fit for cciss, as CD-ROMs are */
}
}
-static inline void complete_buffers(struct bio *bio, int status)
-{
- while (bio) {
- struct bio *xbh = bio->bi_next;
- int nr_sectors = bio_sectors(bio);
-
- bio->bi_next = NULL;
- bio_endio(bio, status ? 0 : -EIO);
- bio = xbh;
- }
-}
-
static void cciss_check_queues(ctlr_info_t *h)
{
int start_queue = h->next_to_run;
h->next_to_run = curr_queue;
break;
}
- } else {
- curr_queue = (curr_queue + 1) % (h->highest_lun + 1);
}
}
}
pci_unmap_page(h->pdev, temp64.val, cmd->SG[i].Len, ddir);
}
- complete_buffers(rq->bio, (rq->errors == 0));
-
- if (blk_fs_request(rq)) {
- const int rw = rq_data_dir(rq);
-
- disk_stat_add(rq->rq_disk, sectors[rw], rq->nr_sectors);
- }
-
#ifdef CCISS_DEBUG
printk("Done with %p\n", rq);
#endif /* CCISS_DEBUG */
- add_disk_randomness(rq->rq_disk);
+ if (blk_end_request(rq, (rq->errors == 0) ? 0 : -EIO, blk_rq_bytes(rq)))
+ BUG();
+
spin_lock_irqsave(&h->lock, flags);
- end_that_request_last(rq, (rq->errors == 0));
cmd_free(h, cmd, 1);
cciss_check_queues(h);
spin_unlock_irqrestore(&h->lock, flags);
}
+/* This function gets the serial number of a logical drive via
+ * inquiry page 0x83. Serial no. is 16 bytes. If the serial
+ * number cannot be had, for whatever reason, 16 bytes of 0xff
+ * are returned instead.
+ */
+static void cciss_get_serial_no(int ctlr, int logvol, int withirq,
+ unsigned char *serial_no, int buflen)
+{
+#define PAGE_83_INQ_BYTES 64
+ int rc;
+ unsigned char *buf;
+
+ if (buflen > 16)
+ buflen = 16;
+ memset(serial_no, 0xff, buflen);
+ buf = kzalloc(PAGE_83_INQ_BYTES, GFP_KERNEL);
+ if (!buf)
+ return;
+ memset(serial_no, 0, buflen);
+ if (withirq)
+ rc = sendcmd_withirq(CISS_INQUIRY, ctlr, buf,
+ PAGE_83_INQ_BYTES, 1, logvol, 0x83, TYPE_CMD);
+ else
+ rc = sendcmd(CISS_INQUIRY, ctlr, buf,
+ PAGE_83_INQ_BYTES, 1, logvol, 0x83, NULL, TYPE_CMD);
+ if (rc == IO_OK)
+ memcpy(serial_no, &buf[8], buflen);
+ kfree(buf);
+ return;
+}
+
+static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
+ int drv_index)
+{
+ disk->queue = blk_init_queue(do_cciss_request, &h->lock);
+ sprintf(disk->disk_name, "cciss/c%dd%d", h->ctlr, drv_index);
+ disk->major = h->major;
+ disk->first_minor = drv_index << NWD_SHIFT;
+ disk->fops = &cciss_fops;
+ disk->private_data = &h->drv[drv_index];
+ disk->driverfs_dev = &h->pdev->dev;
+
+ /* Set up queue information */
+ blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask);
+
+ /* This is a hardware imposed limit. */
+ blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES);
+
+ /* This is a limit in the driver and could be eliminated. */
+ blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES);
+
+ blk_queue_max_sectors(disk->queue, h->cciss_max_sectors);
+
+ blk_queue_softirq_done(disk->queue, cciss_softirq_done);
+
+ disk->queue->queuedata = h;
+
+ blk_queue_hardsect_size(disk->queue,
+ h->drv[drv_index].block_size);
+
+ /* Make sure all queue data is written out before */
+ /* setting h->drv[drv_index].queue, as setting this */
+ /* allows the interrupt handler to start the queue */
+ wmb();
+ h->drv[drv_index].queue = disk->queue;
+ add_disk(disk);
+}
+
/* This function will check the usage_count of the drive to be updated/added.
- * If the usage_count is zero then the drive information will be updated and
- * the disk will be re-registered with the kernel. If not then it will be
- * left alone for the next reboot. The exception to this is disk 0 which
- * will always be left registered with the kernel since it is also the
- * controller node. Any changes to disk 0 will show up on the next
- * reboot.
+ * If the usage_count is zero and it is a heretofore unknown drive, or,
+ * the drive's capacity, geometry, or serial number has changed,
+ * then the drive information will be updated and the disk will be
+ * re-registered with the kernel. If these conditions don't hold,
+ * then it will be left alone for the next reboot. The exception to this
+ * is disk 0 which will always be left registered with the kernel since it
+ * is also the controller node. Any changes to disk 0 will show up on
+ * the next reboot.
*/
-static void cciss_update_drive_info(int ctlr, int drv_index)
+static void cciss_update_drive_info(int ctlr, int drv_index, int first_time)
{
ctlr_info_t *h = hba[ctlr];
struct gendisk *disk;
sector_t total_size;
unsigned long flags = 0;
int ret = 0;
+ drive_info_struct *drvinfo;
+ int was_only_controller_node;
+
+ /* Get information about the disk and modify the driver structure */
+ inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
+ drvinfo = kmalloc(sizeof(*drvinfo), GFP_KERNEL);
+ if (inq_buff == NULL || drvinfo == NULL)
+ goto mem_msg;
+
+ /* See if we're trying to update the "controller node"
+ * this will happen the when the first logical drive gets
+ * created by ACU.
+ */
+ was_only_controller_node = (drv_index == 0 &&
+ h->drv[0].raid_level == -1);
+
+ /* testing to see if 16-byte CDBs are already being used */
+ if (h->cciss_read == CCISS_READ_16) {
+ cciss_read_capacity_16(h->ctlr, drv_index, 1,
+ &total_size, &block_size);
+
+ } else {
+ cciss_read_capacity(ctlr, drv_index, 1,
+ &total_size, &block_size);
+
+ /* if read_capacity returns all F's this volume is >2TB */
+ /* in size so we switch to 16-byte CDB's for all */
+ /* read/write ops */
+ if (total_size == 0xFFFFFFFFULL) {
+ cciss_read_capacity_16(ctlr, drv_index, 1,
+ &total_size, &block_size);
+ h->cciss_read = CCISS_READ_16;
+ h->cciss_write = CCISS_WRITE_16;
+ } else {
+ h->cciss_read = CCISS_READ_10;
+ h->cciss_write = CCISS_WRITE_10;
+ }
+ }
- /* if the disk already exists then deregister it before proceeding */
- if (h->drv[drv_index].raid_level != -1) {
+ cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
+ inq_buff, drvinfo);
+ drvinfo->block_size = block_size;
+ drvinfo->nr_blocks = total_size + 1;
+
+ cciss_get_serial_no(ctlr, drv_index, 1, drvinfo->serial_no,
+ sizeof(drvinfo->serial_no));
+
+ /* Is it the same disk we already know, and nothing's changed? */
+ if (h->drv[drv_index].raid_level != -1 &&
+ ((memcmp(drvinfo->serial_no,
+ h->drv[drv_index].serial_no, 16) == 0) &&
+ drvinfo->block_size == h->drv[drv_index].block_size &&
+ drvinfo->nr_blocks == h->drv[drv_index].nr_blocks &&
+ drvinfo->heads == h->drv[drv_index].heads &&
+ drvinfo->sectors == h->drv[drv_index].sectors &&
+ drvinfo->cylinders == h->drv[drv_index].cylinders))
+ /* The disk is unchanged, nothing to update */
+ goto freeret;
+
+ /* If we get here it's not the same disk, or something's changed,
+ * so we need to * deregister it, and re-register it, if it's not
+ * in use.
+ * If the disk already exists then deregister it before proceeding
+ * (unless it's the first disk (for the controller node).
+ */
+ if (h->drv[drv_index].raid_level != -1 && drv_index != 0) {
+ printk(KERN_WARNING "disk %d has changed.\n", drv_index);
spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
h->drv[drv_index].busy_configuring = 1;
spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
- ret = deregister_disk(h->gendisk[drv_index],
- &h->drv[drv_index], 0);
+
+ /* deregister_disk sets h->drv[drv_index].queue = NULL
+ * which keeps the interrupt handler from starting
+ * the queue.
+ */
+ ret = deregister_disk(h, drv_index, 0);
h->drv[drv_index].busy_configuring = 0;
}
/* If the disk is in use return */
if (ret)
- return;
-
- /* Get information about the disk and modify the driver structure */
- inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
- if (inq_buff == NULL)
- goto mem_msg;
+ goto freeret;
- /* testing to see if 16-byte CDBs are already being used */
- if (h->cciss_read == CCISS_READ_16) {
- cciss_read_capacity_16(h->ctlr, drv_index, 1,
- &total_size, &block_size);
- goto geo_inq;
- }
-
- cciss_read_capacity(ctlr, drv_index, 1,
- &total_size, &block_size);
-
- /* if read_capacity returns all F's this volume is >2TB in size */
- /* so we switch to 16-byte CDB's for all read/write ops */
- if (total_size == 0xFFFFFFFFULL) {
- cciss_read_capacity_16(ctlr, drv_index, 1,
- &total_size, &block_size);
- h->cciss_read = CCISS_READ_16;
- h->cciss_write = CCISS_WRITE_16;
- } else {
- h->cciss_read = CCISS_READ_10;
- h->cciss_write = CCISS_WRITE_10;
- }
-geo_inq:
- cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
- inq_buff, &h->drv[drv_index]);
+ /* Save the new information from cciss_geometry_inquiry
+ * and serial number inquiry.
+ */
+ h->drv[drv_index].block_size = drvinfo->block_size;
+ h->drv[drv_index].nr_blocks = drvinfo->nr_blocks;
+ h->drv[drv_index].heads = drvinfo->heads;
+ h->drv[drv_index].sectors = drvinfo->sectors;
+ h->drv[drv_index].cylinders = drvinfo->cylinders;
+ h->drv[drv_index].raid_level = drvinfo->raid_level;
+ memcpy(h->drv[drv_index].serial_no, drvinfo->serial_no, 16);
++h->num_luns;
disk = h->gendisk[drv_index];
set_capacity(disk, h->drv[drv_index].nr_blocks);
- /* if it's the controller it's already added */
- if (drv_index) {
- disk->queue = blk_init_queue(do_cciss_request, &h->lock);
- sprintf(disk->disk_name, "cciss/c%dd%d", ctlr, drv_index);
- disk->major = h->major;
- disk->first_minor = drv_index << NWD_SHIFT;
- disk->fops = &cciss_fops;
- disk->private_data = &h->drv[drv_index];
-
- /* Set up queue information */
- disk->queue->backing_dev_info.ra_pages = READ_AHEAD;
- blk_queue_bounce_limit(disk->queue, hba[ctlr]->pdev->dma_mask);
-
- /* This is a hardware imposed limit. */
- blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES);
-
- /* This is a limit in the driver and could be eliminated. */
- blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES);
-
- blk_queue_max_sectors(disk->queue, h->cciss_max_sectors);
-
- blk_queue_softirq_done(disk->queue, cciss_softirq_done);
-
- disk->queue->queuedata = hba[ctlr];
-
- blk_queue_hardsect_size(disk->queue,
- hba[ctlr]->drv[drv_index].block_size);
-
- h->drv[drv_index].queue = disk->queue;
- add_disk(disk);
- }
+ /* If it's not disk 0 (drv_index != 0)
+ * or if it was disk 0, but there was previously
+ * no actual corresponding configured logical drive
+ * (raid_leve == -1) then we want to update the
+ * logical drive's information.
+ */
+ if (drv_index || first_time)
+ cciss_add_disk(h, disk, drv_index);
- freeret:
+freeret:
kfree(inq_buff);
+ kfree(drvinfo);
return;
- mem_msg:
+mem_msg:
printk(KERN_ERR "cciss: out of memory\n");
goto freeret;
}
* where new drives will be added. If the index to be returned is greater
* than the highest_lun index for the controller then highest_lun is set
* to this new index. If there are no available indexes then -1 is returned.
+ * "controller_node" is used to know if this is a real logical drive, or just
+ * the controller node, which determines if this counts towards highest_lun.
*/
-static int cciss_find_free_drive_index(int ctlr)
+static int cciss_find_free_drive_index(int ctlr, int controller_node)
{
int i;
for (i = 0; i < CISS_MAX_LUN; i++) {
if (hba[ctlr]->drv[i].raid_level == -1) {
if (i > hba[ctlr]->highest_lun)
- hba[ctlr]->highest_lun = i;
+ if (!controller_node)
+ hba[ctlr]->highest_lun = i;
return i;
}
}
return -1;
}
+/* cciss_add_gendisk finds a free hba[]->drv structure
+ * and allocates a gendisk if needed, and sets the lunid
+ * in the drvinfo structure. It returns the index into
+ * the ->drv[] array, or -1 if none are free.
+ * is_controller_node indicates whether highest_lun should
+ * count this disk, or if it's only being added to provide
+ * a means to talk to the controller in case no logical
+ * drives have yet been configured.
+ */
+static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid, int controller_node)
+{
+ int drv_index;
+
+ drv_index = cciss_find_free_drive_index(h->ctlr, controller_node);
+ if (drv_index == -1)
+ return -1;
+ /*Check if the gendisk needs to be allocated */
+ if (!h->gendisk[drv_index]) {
+ h->gendisk[drv_index] =
+ alloc_disk(1 << NWD_SHIFT);
+ if (!h->gendisk[drv_index]) {
+ printk(KERN_ERR "cciss%d: could not "
+ "allocate a new disk %d\n",
+ h->ctlr, drv_index);
+ return -1;
+ }
+ }
+ h->drv[drv_index].LunID = lunid;
+
+ /* Don't need to mark this busy because nobody */
+ /* else knows about this disk yet to contend */
+ /* for access to it. */
+ h->drv[drv_index].busy_configuring = 0;
+ wmb();
+ return drv_index;
+}
+
+/* This is for the special case of a controller which
+ * has no logical drives. In this case, we still need
+ * to register a disk so the controller can be accessed
+ * by the Array Config Utility.
+ */
+static void cciss_add_controller_node(ctlr_info_t *h)
+{
+ struct gendisk *disk;
+ int drv_index;
+
+ if (h->gendisk[0] != NULL) /* already did this? Then bail. */
+ return;
+
+ drv_index = cciss_add_gendisk(h, 0, 1);
+ if (drv_index == -1) {
+ printk(KERN_WARNING "cciss%d: could not "
+ "add disk 0.\n", h->ctlr);
+ return;
+ }
+ h->drv[drv_index].block_size = 512;
+ h->drv[drv_index].nr_blocks = 0;
+ h->drv[drv_index].heads = 0;
+ h->drv[drv_index].sectors = 0;
+ h->drv[drv_index].cylinders = 0;
+ h->drv[drv_index].raid_level = -1;
+ memset(h->drv[drv_index].serial_no, 0, 16);
+ disk = h->gendisk[drv_index];
+ cciss_add_disk(h, disk, drv_index);
+}
+
/* This function will add and remove logical drives from the Logical
* drive array of the controller and maintain persistency of ordering
* so that mount points are preserved until the next reboot. This allows
* without a re-ordering of those drives.
* INPUT
* h = The controller to perform the operations on
- * del_disk = The disk to remove if specified. If the value given
- * is NULL then no disk is removed.
*/
-static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk)
+static int rebuild_lun_table(ctlr_info_t *h, int first_time)
{
int ctlr = h->ctlr;
int num_luns;
ReportLunData_struct *ld_buff = NULL;
- drive_info_struct *drv = NULL;
int return_code;
int listlength = 0;
int i;
__u32 lunid = 0;
unsigned long flags;
+ if (!capable(CAP_SYS_RAWIO))
+ return -EPERM;
+
/* Set busy_configuring flag for this operation */
spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
if (h->busy_configuring) {
return -EBUSY;
}
h->busy_configuring = 1;
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+
+ ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
+ if (ld_buff == NULL)
+ goto mem_msg;
+
+ return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
+ sizeof(ReportLunData_struct), 0,
+ 0, 0, TYPE_CMD);
+
+ if (return_code == IO_OK)
+ listlength = be32_to_cpu(*(__be32 *) ld_buff->LUNListLength);
+ else { /* reading number of logical volumes failed */
+ printk(KERN_WARNING "cciss: report logical volume"
+ " command failed\n");
+ listlength = 0;
+ goto freeret;
+ }
+
+ num_luns = listlength / 8; /* 8 bytes per entry */
+ if (num_luns > CISS_MAX_LUN) {
+ num_luns = CISS_MAX_LUN;
+ printk(KERN_WARNING "cciss: more luns configured"
+ " on controller than can be handled by"
+ " this driver.\n");
+ }
- /* if del_disk is NULL then we are being called to add a new disk
- * and update the logical drive table. If it is not NULL then
- * we will check if the disk is in use or not.
+ if (num_luns == 0)
+ cciss_add_controller_node(h);
+
+ /* Compare controller drive array to driver's drive array
+ * to see if any drives are missing on the controller due
+ * to action of Array Config Utility (user deletes drive)
+ * and deregister logical drives which have disappeared.
*/
- if (del_disk != NULL) {
- drv = get_drv(del_disk);
- drv->busy_configuring = 1;
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
- return_code = deregister_disk(del_disk, drv, 1);
- drv->busy_configuring = 0;
- h->busy_configuring = 0;
- return return_code;
- } else {
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
- if (!capable(CAP_SYS_RAWIO))
- return -EPERM;
+ for (i = 0; i <= h->highest_lun; i++) {
+ int j;
+ drv_found = 0;
- ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
- if (ld_buff == NULL)
- goto mem_msg;
-
- return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
- sizeof(ReportLunData_struct), 0,
- 0, 0, TYPE_CMD);
-
- if (return_code == IO_OK) {
- listlength =
- be32_to_cpu(*(__be32 *) ld_buff->LUNListLength);
- } else { /* reading number of logical volumes failed */
- printk(KERN_WARNING "cciss: report logical volume"
- " command failed\n");
- listlength = 0;
- goto freeret;
- }
+ /* skip holes in the array from already deleted drives */
+ if (h->drv[i].raid_level == -1)
+ continue;
- num_luns = listlength / 8; /* 8 bytes per entry */
- if (num_luns > CISS_MAX_LUN) {
- num_luns = CISS_MAX_LUN;
- printk(KERN_WARNING "cciss: more luns configured"
- " on controller than can be handled by"
- " this driver.\n");
+ for (j = 0; j < num_luns; j++) {
+ memcpy(&lunid, &ld_buff->LUN[j][0], 4);
+ lunid = le32_to_cpu(lunid);
+ if (h->drv[i].LunID == lunid) {
+ drv_found = 1;
+ break;
+ }
}
+ if (!drv_found) {
+ /* Deregister it from the OS, it's gone. */
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ h->drv[i].busy_configuring = 1;
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ return_code = deregister_disk(h, i, 1);
+ h->drv[i].busy_configuring = 0;
+ }
+ }
+
+ /* Compare controller drive array to driver's drive array.
+ * Check for updates in the drive information and any new drives
+ * on the controller due to ACU adding logical drives, or changing
+ * a logical drive's size, etc. Reregister any new/changed drives
+ */
+ for (i = 0; i < num_luns; i++) {
+ int j;
+
+ drv_found = 0;
- /* Compare controller drive array to drivers drive array.
- * Check for updates in the drive information and any new drives
- * on the controller.
+ memcpy(&lunid, &ld_buff->LUN[i][0], 4);
+ lunid = le32_to_cpu(lunid);
+
+ /* Find if the LUN is already in the drive array
+ * of the driver. If so then update its info
+ * if not in use. If it does not exist then find
+ * the first free index and add it.
*/
- for (i = 0; i < num_luns; i++) {
- int j;
-
- drv_found = 0;
-
- lunid = (0xff &
- (unsigned int)(ld_buff->LUN[i][3])) << 24;
- lunid |= (0xff &
- (unsigned int)(ld_buff->LUN[i][2])) << 16;
- lunid |= (0xff &
- (unsigned int)(ld_buff->LUN[i][1])) << 8;
- lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
-
- /* Find if the LUN is already in the drive array
- * of the controller. If so then update its info
- * if not is use. If it does not exist then find
- * the first free index and add it.
- */
- for (j = 0; j <= h->highest_lun; j++) {
- if (h->drv[j].LunID == lunid) {
- drv_index = j;
- drv_found = 1;
- }
+ for (j = 0; j <= h->highest_lun; j++) {
+ if (h->drv[j].raid_level != -1 &&
+ h->drv[j].LunID == lunid) {
+ drv_index = j;
+ drv_found = 1;
+ break;
}
+ }
- /* check if the drive was found already in the array */
- if (!drv_found) {
- drv_index = cciss_find_free_drive_index(ctlr);
- if (drv_index == -1)
- goto freeret;
-
- /*Check if the gendisk needs to be allocated */
- if (!h->gendisk[drv_index]){
- h->gendisk[drv_index] = alloc_disk(1 << NWD_SHIFT);
- if (!h->gendisk[drv_index]){
- printk(KERN_ERR "cciss: could not allocate new disk %d\n", drv_index);
- goto mem_msg;
- }
- }
- }
- h->drv[drv_index].LunID = lunid;
- cciss_update_drive_info(ctlr, drv_index);
- } /* end for */
- } /* end else */
+ /* check if the drive was found already in the array */
+ if (!drv_found) {
+ drv_index = cciss_add_gendisk(h, lunid, 0);
+ if (drv_index == -1)
+ goto freeret;
+ }
+ cciss_update_drive_info(ctlr, drv_index, first_time);
+ } /* end for */
- freeret:
+freeret:
kfree(ld_buff);
h->busy_configuring = 0;
/* We return -1 here to tell the ACU that we have registered/updated
* additional times.
*/
return -1;
- mem_msg:
+mem_msg:
printk(KERN_ERR "cciss: out of memory\n");
+ h->busy_configuring = 0;
goto freeret;
}
* the highest_lun should be left unchanged and the LunID
* should not be cleared.
*/
-static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
+static int deregister_disk(ctlr_info_t *h, int drv_index,
int clear_all)
{
int i;
- ctlr_info_t *h = get_host(disk);
+ struct gendisk *disk;
+ drive_info_struct *drv;
if (!capable(CAP_SYS_RAWIO))
return -EPERM;
+ drv = &h->drv[drv_index];
+ disk = h->gendisk[drv_index];
+
/* make sure logical volume is NOT is use */
if (clear_all || (h->gendisk[0] == disk)) {
if (drv->usage_count > 1)
* allows us to delete disk zero but keep the controller registered.
*/
if (h->gendisk[0] != disk) {
- if (disk) {
- struct request_queue *q = disk->queue;
- if (disk->flags & GENHD_FL_UP)
- del_gendisk(disk);
- if (q) {
- blk_cleanup_queue(q);
- /* Set drv->queue to NULL so that we do not try
- * to call blk_start_queue on this queue in the
- * interrupt handler
- */
- drv->queue = NULL;
- }
- /* If clear_all is set then we are deleting the logical
- * drive, not just refreshing its info. For drives
- * other than disk 0 we will call put_disk. We do not
- * do this for disk 0 as we need it to be able to
- * configure the controller.
- */
- if (clear_all){
- /* This isn't pretty, but we need to find the
- * disk in our array and NULL our the pointer.
- * This is so that we will call alloc_disk if
- * this index is used again later.
- */
- for (i=0; i < CISS_MAX_LUN; i++){
- if(h->gendisk[i] == disk){
- h->gendisk[i] = NULL;
- break;
- }
+ struct request_queue *q = disk->queue;
+ if (disk->flags & GENHD_FL_UP)
+ del_gendisk(disk);
+ if (q) {
+ blk_cleanup_queue(q);
+ /* Set drv->queue to NULL so that we do not try
+ * to call blk_start_queue on this queue in the
+ * interrupt handler
+ */
+ drv->queue = NULL;
+ }
+ /* If clear_all is set then we are deleting the logical
+ * drive, not just refreshing its info. For drives
+ * other than disk 0 we will call put_disk. We do not
+ * do this for disk 0 as we need it to be able to
+ * configure the controller.
+ */
+ if (clear_all){
+ /* This isn't pretty, but we need to find the
+ * disk in our array and NULL our the pointer.
+ * This is so that we will call alloc_disk if
+ * this index is used again later.
+ */
+ for (i=0; i < CISS_MAX_LUN; i++){
+ if (h->gendisk[i] == disk) {
+ h->gendisk[i] = NULL;
+ break;
}
- put_disk(disk);
}
+ put_disk(disk);
}
} else {
set_capacity(disk, 0);
if (drv == h->drv + h->highest_lun) {
/* if so, find the new hightest lun */
int i, newhighest = -1;
- for (i = 0; i < h->highest_lun; i++) {
+ for (i = 0; i <= h->highest_lun; i++) {
/* if the disk has size > 0, it is available */
if (h->drv[i].heads)
newhighest = i;
{
CommandList_struct *c;
- while ((c = h->reqQ) != NULL) {
+ while (!hlist_empty(&h->reqQ)) {
+ c = hlist_entry(h->reqQ.first, CommandList_struct, list);
/* can't do anything if fifo is full */
if ((h->access.fifo_full(h))) {
printk(KERN_WARNING "cciss: fifo full\n");
}
/* Get the first entry from the Request Q */
- removeQ(&(h->reqQ), c);
+ removeQ(c);
h->Qdepth--;
/* Tell the controller execute command */
h->access.submit_command(h, c);
/* Put job onto the completed Q */
- addQ(&(h->cmpQ), c);
+ addQ(&h->cmpQ, c);
}
}
memset(c->err_info, 0, sizeof(ErrorInfo_struct));
/* add it to software queue and then send it to the controller */
- addQ(&(h->reqQ), c);
+ addQ(&h->reqQ, c);
h->Qdepth++;
if (h->Qdepth > h->maxQsinceinit)
h->maxQsinceinit = h->Qdepth;
start_io(h);
}
+static inline unsigned int make_status_bytes(unsigned int scsi_status_byte,
+ unsigned int msg_byte, unsigned int host_byte,
+ unsigned int driver_byte)
+{
+ /* inverse of macros in scsi.h */
+ return (scsi_status_byte & 0xff) |
+ ((msg_byte & 0xff) << 8) |
+ ((host_byte & 0xff) << 16) |
+ ((driver_byte & 0xff) << 24);
+}
+
static inline int evaluate_target_status(CommandList_struct *cmd)
{
unsigned char sense_key;
- int error_count = 1;
+ unsigned char status_byte, msg_byte, host_byte, driver_byte;
+ int error_value;
+
+ /* If we get in here, it means we got "target status", that is, scsi status */
+ status_byte = cmd->err_info->ScsiStatus;
+ driver_byte = DRIVER_OK;
+ msg_byte = cmd->err_info->CommandStatus; /* correct? seems too device specific */
+
+ if (blk_pc_request(cmd->rq))
+ host_byte = DID_PASSTHROUGH;
+ else
+ host_byte = DID_OK;
+
+ error_value = make_status_bytes(status_byte, msg_byte,
+ host_byte, driver_byte);
- if (cmd->err_info->ScsiStatus != 0x02) { /* not check condition? */
+ if (cmd->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) {
if (!blk_pc_request(cmd->rq))
printk(KERN_WARNING "cciss: cmd %p "
"has SCSI Status 0x%x\n",
cmd, cmd->err_info->ScsiStatus);
- return error_count;
+ return error_value;
}
/* check the sense key */
sense_key = 0xf & cmd->err_info->SenseInfo[2];
/* no status or recovered error */
- if ((sense_key == 0x0) || (sense_key == 0x1))
- error_count = 0;
+ if (((sense_key == 0x0) || (sense_key == 0x1)) && !blk_pc_request(cmd->rq))
+ error_value = 0;
if (!blk_pc_request(cmd->rq)) { /* Not SG_IO or similar? */
- if (error_count != 0)
+ if (error_value != 0)
printk(KERN_WARNING "cciss: cmd %p has CHECK CONDITION"
" sense key = 0x%x\n", cmd, sense_key);
- return error_count;
+ return error_value;
}
/* SG_IO or similar, copy sense data back */
} else
cmd->rq->sense_len = 0;
- return error_count;
+ return error_value;
}
/* checks the status of the job and calls complete buffers to mark all
rq->errors = 0;
if (timeout)
- rq->errors = 1;
+ rq->errors = make_status_bytes(0, 0, 0, DRIVER_TIMEOUT);
if (cmd->err_info->CommandStatus == 0) /* no error has occurred */
goto after_error_processing;
case CMD_INVALID:
printk(KERN_WARNING "cciss: cmd %p is "
"reported invalid\n", cmd);
- rq->errors = 1;
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_PROTOCOL_ERR:
printk(KERN_WARNING "cciss: cmd %p has "
"protocol error \n", cmd);
- rq->errors = 1;
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_HARDWARE_ERR:
printk(KERN_WARNING "cciss: cmd %p had "
" hardware error\n", cmd);
- rq->errors = 1;
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_CONNECTION_LOST:
printk(KERN_WARNING "cciss: cmd %p had "
"connection lost\n", cmd);
- rq->errors = 1;
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_ABORTED:
printk(KERN_WARNING "cciss: cmd %p was "
"aborted\n", cmd);
- rq->errors = 1;
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ABORT);
break;
case CMD_ABORT_FAILED:
printk(KERN_WARNING "cciss: cmd %p reports "
"abort failed\n", cmd);
- rq->errors = 1;
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
break;
case CMD_UNSOLICITED_ABORT:
printk(KERN_WARNING "cciss%d: unsolicited "
printk(KERN_WARNING
"cciss%d: %p retried too "
"many times\n", h->ctlr, cmd);
- rq->errors = 1;
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ABORT);
break;
case CMD_TIMEOUT:
printk(KERN_WARNING "cciss: cmd %p timedout\n", cmd);
- rq->errors = 1;
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
break;
default:
printk(KERN_WARNING "cciss: cmd %p returned "
"unknown status %x\n", cmd,
cmd->err_info->CommandStatus);
- rq->errors = 1;
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
}
after_error_processing:
resend_cciss_cmd(h, cmd);
return;
}
- cmd->rq->data_len = 0;
cmd->rq->completion_data = cmd;
- blk_add_trace_rq(cmd->rq->q, cmd->rq, BLK_TA_COMPLETE);
blk_complete_request(cmd->rq);
}
(int)creq->nr_sectors);
#endif /* CCISS_DEBUG */
- memset(tmp_sg, 0, sizeof(tmp_sg));
+ sg_init_table(tmp_sg, MAXSGENTRIES);
seg = blk_rq_map_sg(q, creq, tmp_sg);
/* get the DMA records for the setup */
for (i = 0; i < seg; i++) {
c->SG[i].Len = tmp_sg[i].length;
- temp64.val = (__u64) pci_map_page(h->pdev, tmp_sg[i].page,
+ temp64.val = (__u64) pci_map_page(h->pdev, sg_page(&tmp_sg[i]),
tmp_sg[i].offset,
tmp_sg[i].length, dir);
c->SG[i].Addr.lower = temp64.val32.lower;
h->maxSG = seg;
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: Submitting %d sectors in %d segments\n",
+ printk(KERN_DEBUG "cciss: Submitting %lu sectors in %d segments\n",
creq->nr_sectors, seg);
#endif /* CCISS_DEBUG */
c->Request.CDB[8] = creq->nr_sectors & 0xff;
c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0;
} else {
+ u32 upper32 = upper_32_bits(start_blk);
+
c->Request.CDBLen = 16;
c->Request.CDB[1]= 0;
- c->Request.CDB[2]= (start_blk >> 56) & 0xff; //MSB
- c->Request.CDB[3]= (start_blk >> 48) & 0xff;
- c->Request.CDB[4]= (start_blk >> 40) & 0xff;
- c->Request.CDB[5]= (start_blk >> 32) & 0xff;
+ c->Request.CDB[2]= (upper32 >> 24) & 0xff; //MSB
+ c->Request.CDB[3]= (upper32 >> 16) & 0xff;
+ c->Request.CDB[4]= (upper32 >> 8) & 0xff;
+ c->Request.CDB[5]= upper32 & 0xff;
c->Request.CDB[6]= (start_blk >> 24) & 0xff;
c->Request.CDB[7]= (start_blk >> 16) & 0xff;
c->Request.CDB[8]= (start_blk >> 8) & 0xff;
spin_lock_irq(q->queue_lock);
- addQ(&(h->reqQ), c);
+ addQ(&h->reqQ, c);
h->Qdepth++;
if (h->Qdepth > h->maxQsinceinit)
h->maxQsinceinit = h->Qdepth;
a = c->busaddr;
} else {
+ struct hlist_node *tmp;
+
a &= ~3;
- if ((c = h->cmpQ) == NULL) {
- printk(KERN_WARNING
- "cciss: Completion of %08x ignored\n",
- a1);
- continue;
- }
- while (c->busaddr != a) {
- c = c->next;
- if (c == h->cmpQ)
+ c = NULL;
+ hlist_for_each_entry(c, tmp, &h->cmpQ, list) {
+ if (c->busaddr == a)
break;
}
}
* If we've found the command, take it off the
* completion Q and free it
*/
- if (c->busaddr == a) {
- removeQ(&h->cmpQ, c);
+ if (c && c->busaddr == a) {
+ removeQ(c);
if (c->cmd_type == CMD_RWREQ) {
complete_command(h, c, 0);
} else if (c->cmd_type == CMD_IOCTL_PEND) {
return;
}
-static int cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
+static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
{
ushort subsystem_vendor_id, subsystem_device_id, command;
__u32 board_id, scratchpad = 0;
c->paddr = pci_resource_start(pdev, 0); /* addressing mode bits already removed */
#ifdef CCISS_DEBUG
- printk("address 0 = %x\n", c->paddr);
+ printk("address 0 = %lx\n", c->paddr);
#endif /* CCISS_DEBUG */
c->vaddr = remap_pci_mem(c->paddr, 0x250);
#endif /* CCISS_DEBUG */
cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr);
#ifdef CCISS_DEBUG
- printk("cfg base address index = %x\n", cfg_base_addr_index);
+ printk("cfg base address index = %llx\n",
+ (unsigned long long)cfg_base_addr_index);
#endif /* CCISS_DEBUG */
if (cfg_base_addr_index == -1) {
printk(KERN_WARNING "cciss: Cannot find cfg_base_addr_index\n");
cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET);
#ifdef CCISS_DEBUG
- printk("cfg offset = %x\n", cfg_offset);
+ printk("cfg offset = %llx\n", (unsigned long long)cfg_offset);
#endif /* CCISS_DEBUG */
c->cfgtable = remap_pci_mem(pci_resource_start(pdev,
cfg_base_addr_index) +
print_cfg_table(c->cfgtable);
#endif /* CCISS_DEBUG */
+ /* Some controllers support Zero Memory Raid (ZMR).
+ * When configured in ZMR mode the number of supported
+ * commands drops to 64. So instead of just setting an
+ * arbitrary value we make the driver a little smarter.
+ * We read the config table to tell us how many commands
+ * are supported on the controller then subtract 4 to
+ * leave a little room for ioctl calls.
+ */
+ c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
for (i = 0; i < ARRAY_SIZE(products); i++) {
if (board_id == products[i].board_id) {
c->product_name = products[i].product_name;
c->access = *(products[i].access);
- c->nr_cmds = products[i].nr_cmds;
+ c->nr_cmds = c->max_commands - 4;
break;
}
}
if (subsystem_vendor_id == PCI_VENDOR_ID_HP) {
c->product_name = products[i-1].product_name;
c->access = *(products[i-1].access);
- c->nr_cmds = products[i-1].nr_cmds;
+ c->nr_cmds = c->max_commands - 4;
printk(KERN_WARNING "cciss: This is an unknown "
"Smart Array controller.\n"
"cciss: Please update to the latest driver "
}
#endif
- /* Disabling DMA prefetch for the P600
- * An ASIC bug may result in a prefetch beyond
- * physical memory.
+ /* Disabling DMA prefetch and refetch for the P600.
+ * An ASIC bug may result in accesses to invalid memory addresses.
+ * We've disabled prefetch for some time now. Testing with XEN
+ * kernels revealed a bug in the refetch if dom0 resides on a P600.
*/
if(board_id == 0x3225103C) {
__u32 dma_prefetch;
+ __u32 dma_refetch;
dma_prefetch = readl(c->vaddr + I2O_DMA1_CFG);
dma_prefetch |= 0x8000;
writel(dma_prefetch, c->vaddr + I2O_DMA1_CFG);
+ pci_read_config_dword(pdev, PCI_COMMAND_PARITY, &dma_refetch);
+ dma_refetch |= 0x1;
+ pci_write_config_dword(pdev, PCI_COMMAND_PARITY, dma_refetch);
}
#ifdef CCISS_DEBUG
return err;
}
-/*
- * Gets information about the local volumes attached to the controller.
+/* Function to find the first free pointer into our hba[] array
+ * Returns -1 if no free entries are left.
*/
-static void cciss_getgeometry(int cntl_num)
-{
- ReportLunData_struct *ld_buff;
- InquiryData_struct *inq_buff;
- int return_code;
- int i;
- int listlength = 0;
- __u32 lunid = 0;
- unsigned block_size;
- sector_t total_size;
-
- ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
- if (ld_buff == NULL) {
- printk(KERN_ERR "cciss: out of memory\n");
- return;
- }
- inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
- if (inq_buff == NULL) {
- printk(KERN_ERR "cciss: out of memory\n");
- kfree(ld_buff);
- return;
- }
- /* Get the firmware version */
- return_code = sendcmd(CISS_INQUIRY, cntl_num, inq_buff,
- sizeof(InquiryData_struct), 0, 0, 0, NULL,
- TYPE_CMD);
- if (return_code == IO_OK) {
- hba[cntl_num]->firm_ver[0] = inq_buff->data_byte[32];
- hba[cntl_num]->firm_ver[1] = inq_buff->data_byte[33];
- hba[cntl_num]->firm_ver[2] = inq_buff->data_byte[34];
- hba[cntl_num]->firm_ver[3] = inq_buff->data_byte[35];
- } else { /* send command failed */
-
- printk(KERN_WARNING "cciss: unable to determine firmware"
- " version of controller\n");
- }
- /* Get the number of logical volumes */
- return_code = sendcmd(CISS_REPORT_LOG, cntl_num, ld_buff,
- sizeof(ReportLunData_struct), 0, 0, 0, NULL,
- TYPE_CMD);
-
- if (return_code == IO_OK) {
-#ifdef CCISS_DEBUG
- printk("LUN Data\n--------------------------\n");
-#endif /* CCISS_DEBUG */
-
- listlength |=
- (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24;
- listlength |=
- (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16;
- listlength |=
- (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8;
- listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]);
- } else { /* reading number of logical volumes failed */
-
- printk(KERN_WARNING "cciss: report logical volume"
- " command failed\n");
- listlength = 0;
- }
- hba[cntl_num]->num_luns = listlength / 8; // 8 bytes pre entry
- if (hba[cntl_num]->num_luns > CISS_MAX_LUN) {
- printk(KERN_ERR
- "ciss: only %d number of logical volumes supported\n",
- CISS_MAX_LUN);
- hba[cntl_num]->num_luns = CISS_MAX_LUN;
- }
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "Length = %x %x %x %x = %d\n",
- ld_buff->LUNListLength[0], ld_buff->LUNListLength[1],
- ld_buff->LUNListLength[2], ld_buff->LUNListLength[3],
- hba[cntl_num]->num_luns);
-#endif /* CCISS_DEBUG */
-
- hba[cntl_num]->highest_lun = hba[cntl_num]->num_luns - 1;
- for (i = 0; i < CISS_MAX_LUN; i++) {
- if (i < hba[cntl_num]->num_luns) {
- lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3]))
- << 24;
- lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2]))
- << 16;
- lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1]))
- << 8;
- lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
-
- hba[cntl_num]->drv[i].LunID = lunid;
-
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "LUN[%d]: %x %x %x %x = %x\n", i,
- ld_buff->LUN[i][0], ld_buff->LUN[i][1],
- ld_buff->LUN[i][2], ld_buff->LUN[i][3],
- hba[cntl_num]->drv[i].LunID);
-#endif /* CCISS_DEBUG */
-
- /* testing to see if 16-byte CDBs are already being used */
- if(hba[cntl_num]->cciss_read == CCISS_READ_16) {
- cciss_read_capacity_16(cntl_num, i, 0,
- &total_size, &block_size);
- goto geo_inq;
- }
- cciss_read_capacity(cntl_num, i, 0, &total_size, &block_size);
-
- /* If read_capacity returns all F's the logical is >2TB */
- /* so we switch to 16-byte CDBs for all read/write ops */
- if(total_size == 0xFFFFFFFFULL) {
- cciss_read_capacity_16(cntl_num, i, 0,
- &total_size, &block_size);
- hba[cntl_num]->cciss_read = CCISS_READ_16;
- hba[cntl_num]->cciss_write = CCISS_WRITE_16;
- } else {
- hba[cntl_num]->cciss_read = CCISS_READ_10;
- hba[cntl_num]->cciss_write = CCISS_WRITE_10;
- }
-geo_inq:
- cciss_geometry_inquiry(cntl_num, i, 0, total_size,
- block_size, inq_buff,
- &hba[cntl_num]->drv[i]);
- } else {
- /* initialize raid_level to indicate a free space */
- hba[cntl_num]->drv[i].raid_level = -1;
- }
- }
- kfree(ld_buff);
- kfree(inq_buff);
-}
-
-/* Function to find the first free pointer into our hba[] array */
-/* Returns -1 if no free entries are left. */
static int alloc_cciss_hba(void)
{
int i;
p = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL);
if (!p)
goto Enomem;
- p->gendisk[0] = alloc_disk(1 << NWD_SHIFT);
- if (!p->gendisk[0]) {
- kfree(p);
- goto Enomem;
- }
hba[i] = p;
return i;
}
int i;
int j = 0;
int rc;
- int dac;
+ int dac, return_code;
+ InquiryData_struct *inq_buff = NULL;
i = alloc_cciss_hba();
if (i < 0)
return -1;
hba[i]->busy_initializing = 1;
+ INIT_HLIST_HEAD(&hba[i]->cmpQ);
+ INIT_HLIST_HEAD(&hba[i]->reqQ);
if (cciss_pci_init(hba[i], pdev) != 0)
goto clean1;
hba[i]->intr[SIMPLE_MODE_INT], dac ? "" : " not");
hba[i]->cmd_pool_bits =
- kmalloc(((hba[i]->nr_cmds + BITS_PER_LONG -
- 1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL);
+ kmalloc(DIV_ROUND_UP(hba[i]->nr_cmds, BITS_PER_LONG)
+ * sizeof(unsigned long), GFP_KERNEL);
hba[i]->cmd_pool = (CommandList_struct *)
pci_alloc_consistent(hba[i]->pdev,
hba[i]->nr_cmds * sizeof(CommandList_struct),
/* command and error info recs zeroed out before
they are used */
memset(hba[i]->cmd_pool_bits, 0,
- ((hba[i]->nr_cmds + BITS_PER_LONG -
- 1) / BITS_PER_LONG) * sizeof(unsigned long));
-
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "Scanning for drives on controller cciss%d\n", i);
-#endif /* CCISS_DEBUG */
+ DIV_ROUND_UP(hba[i]->nr_cmds, BITS_PER_LONG)
+ * sizeof(unsigned long));
- cciss_getgeometry(i);
+ hba[i]->num_luns = 0;
+ hba[i]->highest_lun = -1;
+ for (j = 0; j < CISS_MAX_LUN; j++) {
+ hba[i]->drv[j].raid_level = -1;
+ hba[i]->drv[j].queue = NULL;
+ hba[i]->gendisk[j] = NULL;
+ }
cciss_scsi_setup(i);
/* Turn the interrupts on so we can service requests */
hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON);
+ /* Get the firmware version */
+ inq_buff = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL);
+ if (inq_buff == NULL) {
+ printk(KERN_ERR "cciss: out of memory\n");
+ goto clean4;
+ }
+
+ return_code = sendcmd_withirq(CISS_INQUIRY, i, inq_buff,
+ sizeof(InquiryData_struct), 0, 0 , 0, TYPE_CMD);
+ if (return_code == IO_OK) {
+ hba[i]->firm_ver[0] = inq_buff->data_byte[32];
+ hba[i]->firm_ver[1] = inq_buff->data_byte[33];
+ hba[i]->firm_ver[2] = inq_buff->data_byte[34];
+ hba[i]->firm_ver[3] = inq_buff->data_byte[35];
+ } else { /* send command failed */
+ printk(KERN_WARNING "cciss: unable to determine firmware"
+ " version of controller\n");
+ }
+
cciss_procinit(i);
hba[i]->cciss_max_sectors = 2048;
hba[i]->busy_initializing = 0;
- do {
- drive_info_struct *drv = &(hba[i]->drv[j]);
- struct gendisk *disk = hba[i]->gendisk[j];
- struct request_queue *q;
-
- /* Check if the disk was allocated already */
- if (!disk){
- hba[i]->gendisk[j] = alloc_disk(1 << NWD_SHIFT);
- disk = hba[i]->gendisk[j];
- }
-
- /* Check that the disk was able to be allocated */
- if (!disk) {
- printk(KERN_ERR "cciss: unable to allocate memory for disk %d\n", j);
- goto clean4;
- }
-
- q = blk_init_queue(do_cciss_request, &hba[i]->lock);
- if (!q) {
- printk(KERN_ERR
- "cciss: unable to allocate queue for disk %d\n",
- j);
- goto clean4;
- }
- drv->queue = q;
-
- q->backing_dev_info.ra_pages = READ_AHEAD;
- blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
-
- /* This is a hardware imposed limit. */
- blk_queue_max_hw_segments(q, MAXSGENTRIES);
-
- /* This is a limit in the driver and could be eliminated. */
- blk_queue_max_phys_segments(q, MAXSGENTRIES);
-
- blk_queue_max_sectors(q, hba[i]->cciss_max_sectors);
-
- blk_queue_softirq_done(q, cciss_softirq_done);
-
- q->queuedata = hba[i];
- sprintf(disk->disk_name, "cciss/c%dd%d", i, j);
- disk->major = hba[i]->major;
- disk->first_minor = j << NWD_SHIFT;
- disk->fops = &cciss_fops;
- disk->queue = q;
- disk->private_data = drv;
- disk->driverfs_dev = &pdev->dev;
- /* we must register the controller even if no disks exist */
- /* this is for the online array utilities */
- if (!drv->heads && j)
- continue;
- blk_queue_hardsect_size(q, drv->block_size);
- set_capacity(disk, drv->nr_blocks);
- add_disk(disk);
- j++;
- } while (j <= hba[i]->highest_lun);
-
+ rebuild_lun_table(hba[i], 1);
return 1;
- clean4:
+clean4:
+ kfree(inq_buff);
#ifdef CONFIG_CISS_SCSI_TAPE
kfree(hba[i]->scsi_rejects.complete);
#endif
hba[i]->errinfo_pool,
hba[i]->errinfo_pool_dhandle);
free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]);
- clean2:
+clean2:
unregister_blkdev(hba[i]->major, hba[i]->devname);
- clean1:
+clean1:
hba[i]->busy_initializing = 0;
/* cleanup any queues that may have been initialized */
for (j=0; j <= hba[i]->highest_lun; j++){
}
}
+#ifdef CONFIG_CISS_SCSI_TAPE
cciss_unregister_scsi(i); /* unhook from SCSI subsystem */
+#endif
cciss_shutdown(pdev);
cciss_remove_one(hba[i]->pdev);
}
}
- remove_proc_entry("cciss", proc_root_driver);
+ remove_proc_entry("driver/cciss", NULL);
}
static void fail_all_cmds(unsigned long ctlr)
pci_disable_device(h->pdev); /* Make sure it is really dead. */
/* move everything off the request queue onto the completed queue */
- while ((c = h->reqQ) != NULL) {
- removeQ(&(h->reqQ), c);
+ while (!hlist_empty(&h->reqQ)) {
+ c = hlist_entry(h->reqQ.first, CommandList_struct, list);
+ removeQ(c);
h->Qdepth--;
- addQ(&(h->cmpQ), c);
+ addQ(&h->cmpQ, c);
}
/* Now, fail everything on the completed queue with a HW error */
- while ((c = h->cmpQ) != NULL) {
- removeQ(&h->cmpQ, c);
+ while (!hlist_empty(&h->cmpQ)) {
+ c = hlist_entry(h->cmpQ.first, CommandList_struct, list);
+ removeQ(c);
c->err_info->CommandStatus = CMD_HARDWARE_ERR;
if (c->cmd_type == CMD_RWREQ) {
complete_command(h, c, 0);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff