# Block device driver configuration
#
-menu "Block devices"
+menuconfig BLK_DEV
+ bool "Block devices"
+ depends on BLOCK
+ default y
+ ---help---
+ Say Y here to get to see options for various different block device
+ drivers. This option alone does not add any kernel code.
+
+ If you say N, all options in this submenu will be skipped and disabled;
+ only do this if you know what you are doing.
+
+if BLK_DEV
config BLK_DEV_FD
tristate "Normal floppy disk support"
---help---
If you want to use the floppy disk drive(s) of your PC under Linux,
say Y. Information about this driver, especially important for IBM
- Thinkpad users, is contained in <file:Documentation/floppy.txt>.
+ Thinkpad users, is contained in
+ <file:Documentation/blockdev/floppy.txt>.
That file also contains the location of the Floppy driver FAQ as
well as location of the fdutils package used to configure additional
parameters of the driver at run time.
tristate "Atari floppy support"
depends on ATARI
-config BLK_DEV_SWIM_IOP
- bool "Macintosh IIfx/Quadra 900/Quadra 950 floppy support (EXPERIMENTAL)"
- depends on MAC && EXPERIMENTAL && BROKEN
- help
- Say Y here to support the SWIM (Super Woz Integrated Machine) IOP
- floppy controller on the Macintosh IIfx and Quadra 900/950.
-
config MAC_FLOPPY
tristate "Support for PowerMac floppy"
depends on PPC_PMAC && !PPC_PMAC64
If you have a SWIM-3 (Super Woz Integrated Machine 3; from Apple)
floppy controller, say Y here. Most commonly found in PowerMacs.
-config BLK_DEV_PS2
- tristate "PS/2 ESDI hard disk support"
- depends on MCA && MCA_LEGACY && BROKEN
+config BLK_DEV_SWIM
+ tristate "Support for SWIM Macintosh floppy"
+ depends on M68K && MAC
help
- Say Y here if you have a PS/2 machine with a MCA bus and an ESDI
- hard disk.
-
- To compile this driver as a module, choose M here: the
- module will be called ps2esdi.
+ You should select this option if you want floppy support
+ and you don't have a II, IIfx, Q900, Q950 or AV series.
config AMIGA_Z2RAM
tristate "Amiga Zorro II ramdisk support"
To compile this driver as a module, choose M here: the
module will be called z2ram.
-config ATARI_ACSI
- tristate "Atari ACSI support"
- depends on ATARI && BROKEN
- ---help---
- This enables support for the Atari ACSI interface. The driver
- supports hard disks and CD-ROMs, which have 512-byte sectors, or can
- be switched to that mode. Due to the ACSI command format, only disks
- up to 1 GB are supported. Special support for certain ACSI to SCSI
- adapters, which could relax that, isn't included yet. The ACSI
- driver is also the basis for certain other drivers for devices
- attached to the ACSI bus: Atari SLM laser printer, BioNet-100
- Ethernet, and PAMsNet Ethernet. If you want to use one of these
- devices, you need ACSI support, too.
-
- To compile this driver as a module, choose M here: the
- module will be called acsi.
-
-comment "Some devices (e.g. CD jukebox) support multiple LUNs"
- depends on ATARI && ATARI_ACSI
-
-config ACSI_MULTI_LUN
- bool "Probe all LUNs on each ACSI device"
- depends on ATARI_ACSI
- help
- If you have a ACSI device that supports more than one LUN (Logical
- Unit Number), e.g. a CD jukebox, you should say Y here so that all
- will be found by the ACSI driver. An ACSI device with multiple LUNs
- acts logically like multiple ACSI devices. The vast majority of ACSI
- devices have only one LUN, and so most people can say N here and
- should in fact do so, because it is safer.
-
-config ATARI_SLM
- tristate "Atari SLM laser printer support"
- depends on ATARI && ATARI_ACSI!=n
- help
- If you have an Atari SLM laser printer, say Y to include support for
- it in the kernel. Otherwise, say N. This driver is also available as
- a module ( = code which can be inserted in and removed from the
- running kernel whenever you want). The module will be called
- acsi_slm. Be warned: the driver needs much ST-RAM and can cause
- problems due to that fact!
-
config BLK_DEV_XD
tristate "XT hard disk support"
depends on ISA && ISA_DMA_API
+ select CHECK_SIGNATURE
help
Very old 8 bit hard disk controllers used in the IBM XT computer
will be supported if you say Y here.
It's pretty unlikely that you have one of these: say N.
+config GDROM
+ tristate "SEGA Dreamcast GD-ROM drive"
+ depends on SH_DREAMCAST
+ help
+ A standard SEGA Dreamcast comes with a modified CD ROM drive called a
+ "GD-ROM" by SEGA to signify it is capable of reading special disks
+ with up to 1 GB of data. This drive will also read standard CD ROM
+ disks. Select this option to access any disks in your GD ROM drive.
+ Most users will want to say "Y" here.
+ You can also build this as a module which will be called gdrom.
+
config PARIDE
tristate "Parallel port IDE device support"
depends on PARPORT_PC
your computer's parallel port. Most of them are actually IDE devices
using a parallel port IDE adapter. This option enables the PARIDE
subsystem which contains drivers for many of these external drives.
- Read <file:Documentation/paride.txt> for more information.
+ Read <file:Documentation/blockdev/paride.txt> for more information.
If you have said Y to the "Parallel-port support" configuration
option, you may share a single port between your printer and other
config BLK_CPQ_DA
tristate "Compaq SMART2 support"
- depends on PCI
+ depends on PCI && VIRT_TO_BUS
help
This is the driver for Compaq Smart Array controllers. Everyone
using these boards should say Y here. See the file
- <file:Documentation/cpqarray.txt> for the current list of boards
- supported by this driver, and for further information on the use of
- this driver.
+ <file:Documentation/blockdev/cpqarray.txt> for the current list of
+ boards supported by this driver, and for further information on the
+ use of this driver.
config BLK_CPQ_CISS_DA
tristate "Compaq Smart Array 5xxx support"
help
This is the driver for Compaq Smart Array 5xxx controllers.
Everyone using these boards should say Y here.
- See <file:Documentation/cciss.txt> for the current list of
+ See <file:Documentation/blockdev/cciss.txt> for the current list of
boards supported by this driver, and for further information
on the use of this driver.
config CISS_SCSI_TAPE
bool "SCSI tape drive support for Smart Array 5xxx"
- depends on BLK_CPQ_CISS_DA && SCSI && PROC_FS
+ depends on BLK_CPQ_CISS_DA && PROC_FS
+ depends on SCSI=y || SCSI=BLK_CPQ_CISS_DA
help
When enabled (Y), this option allows SCSI tape drives and SCSI medium
changers (tape robots) to be accessed via a Compaq 5xxx array
- controller. (See <file:Documentation/cciss.txt> for more details.)
+ controller. (See <file:Documentation/blockdev/cciss.txt> for more details.)
"SCSI support" and "SCSI tape support" must also be enabled for this
option to work.
help
This driver adds support for the Mylex DAC960, AcceleRAID, and
eXtremeRAID PCI RAID controllers. See the file
- <file:Documentation/README.DAC960> for further information about
- this driver.
+ <file:Documentation/blockdev/README.DAC960> for further information
+ about this driver.
To compile this driver as a module, choose M here: the
module will be called DAC960.
module will be called umem.
The umem driver has not yet been allocated a MAJOR number, so
- one is chosen dynamically. Use "devfs" or look in /proc/devices
- for the device number
+ one is chosen dynamically.
config BLK_DEV_UBD
bool "Virtual block device"
bool
default BLK_DEV_UBD
-config MMAPPER
- tristate "Example IO memory driver (BROKEN)"
- depends on UML && BROKEN
- ---help---
- The User-Mode Linux port can provide support for IO Memory
- emulation with this option. This allows a host file to be
- specified as an I/O region on the kernel command line. That file
- will be mapped into UML's kernel address space where a driver can
- locate it and do whatever it wants with the memory, including
- providing an interface to it for UML processes to use.
-
- For more information, see
- <http://user-mode-linux.sourceforge.net/iomem.html>.
-
- If you'd like to be able to provide a simulated IO port space for
- User-Mode Linux processes, say Y. If unsure, say N.
-
config BLK_DEV_LOOP
tristate "Loopback device support"
---help---
config BLK_DEV_CRYPTOLOOP
tristate "Cryptoloop Support"
select CRYPTO
+ select CRYPTO_CBC
depends on BLK_DEV_LOOP
---help---
Say Y here if you want to be able to use the ciphers that are
instead, which can be configured to be on-disk compatible with the
cryptoloop device.
+source "drivers/block/drbd/Kconfig"
+
config BLK_DEV_NBD
tristate "Network block device support"
depends on NET
userland (making server and client physically the same computer,
communicating using the loopback network device).
- Read <file:Documentation/nbd.txt> for more information, especially
- about where to find the server code, which runs in user space and
- does not need special kernel support.
+ Read <file:Documentation/blockdev/nbd.txt> for more information,
+ especially about where to find the server code, which runs in user
+ space and does not need special kernel support.
Note that this has nothing to do with the network file systems NFS
or Coda; you can say N here even if you intend to use NFS or Coda.
If unsure, say N.
+config BLK_DEV_OSD
+ tristate "OSD object-as-blkdev support"
+ depends on SCSI_OSD_ULD
+ ---help---
+ Saying Y or M here will allow the exporting of a single SCSI
+ OSD (object-based storage) object as a Linux block device.
+
+ For example, if you create a 2G object on an OSD device,
+ you can then use this module to present that 2G object as
+ a Linux block device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called osdblk.
+
+ If unsure, say N.
+
config BLK_DEV_SX8
tristate "Promise SATA SX8 support"
depends on PCI
If unsure, say N.
config BLK_DEV_RAM
- tristate "RAM disk support"
+ tristate "RAM block device support"
---help---
Saying Y here will allow you to use a portion of your RAM memory as
a block device, so that you can make file systems on it, read and
store a copy of a minimal root file system off of a floppy into RAM
during the initial install of Linux.
- Note that the kernel command line option "ramdisk=XX" is now
- obsolete. For details, read <file:Documentation/ramdisk.txt>.
+ Note that the kernel command line option "ramdisk=XX" is now obsolete.
+ For details, read <file:Documentation/blockdev/ramdisk.txt>.
To compile this driver as a module, choose M here: the
module will be called rd.
default "16"
depends on BLK_DEV_RAM
help
- The default value is 16 RAM disks. Change this if you know what
+ The default value is 16 RAM disks. Change this if you know what you
are doing. If you boot from a filesystem that needs to be extracted
in memory, you will need at least one RAM disk (e.g. root on cramfs).
default "4096"
help
The default value is 4096 kilobytes. Only change this if you know
- what are you doing. If you are using IBM S/390, then set this to
- 8192.
+ what you are doing.
-config BLK_DEV_INITRD
- bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
+config BLK_DEV_XIP
+ bool "Support XIP filesystems on RAM block device"
+ depends on BLK_DEV_RAM
+ default n
help
- The initial RAM filesystem is a ramfs which is loaded by the
- boot loader (loadlin or lilo) and that is mounted as root
- before the normal boot procedure. It is typically used to
- load modules needed to mount the "real" root file system,
- etc. See <file:Documentation/initrd.txt> for details.
-
- If RAM disk support (BLK_DEV_RAM) is also included, this
- also enables initial RAM disk (initrd) support.
-
+ Support XIP filesystems (such as ext2 with XIP support on) on
+ top of block ram device. This will slightly enlarge the kernel, and
+ will prevent RAM block device backing store memory from being
+ allocated from highmem (only a problem for highmem systems).
config CDROM_PKTCDVD
tristate "Packet writing on CD/DVD media"
depends on !UML
help
- If you have a CDROM drive that supports packet writing, say Y to
- include preliminary support. It should work with any MMC/Mt Fuji
- compliant ATAPI or SCSI drive, which is just about any newer CD
- writer.
+ If you have a CDROM/DVD drive that supports packet writing, say
+ Y to include support. It should work with any MMC/Mt Fuji
+ compliant ATAPI or SCSI drive, which is just about any newer
+ DVD/CD writer.
- Currently only writing to CD-RW, DVD-RW and DVD+RW discs is possible.
+ Currently only writing to CD-RW, DVD-RW, DVD+RW and DVDRAM discs
+ is possible.
DVD-RW disks must be in restricted overwrite mode.
+ See the file <file:Documentation/cdrom/packet-writing.txt>
+ for further information on the use of this driver.
+
To compile this driver as a module, choose M here: the
module will be called pktcdvd.
this option is dangerous unless the CD-RW media is known good, as we
don't do deferred write error handling yet.
-source "drivers/s390/block/Kconfig"
-
config ATA_OVER_ETH
tristate "ATA over Ethernet support"
depends on NET
This driver provides Support for ATA over Ethernet block
devices like the Coraid EtherDrive (R) Storage Blade.
-endmenu
+config MG_DISK
+ tristate "mGine mflash, gflash support"
+ depends on ARM && GPIOLIB
+ help
+ mGine mFlash(gFlash) block device driver
+
+config MG_DISK_RES
+ int "Size of reserved area before MBR"
+ depends on MG_DISK
+ default 0
+ help
+ Define size of reserved area that usually used for boot. Unit is KB.
+ All of the block device operation will be taken this value as start
+ offset
+ Examples:
+ 1024 => 1 MB
+
+config SUNVDC
+ tristate "Sun Virtual Disk Client support"
+ depends on SUN_LDOMS
+ help
+ Support for virtual disk devices as a client under Sun
+ Logical Domains.
+
+source "drivers/s390/block/Kconfig"
+
+config XILINX_SYSACE
+ tristate "Xilinx SystemACE support"
+ depends on 4xx || MICROBLAZE
+ help
+ Include support for the Xilinx SystemACE CompactFlash interface
+
+config XEN_BLKDEV_FRONTEND
+ tristate "Xen virtual block device support"
+ depends on XEN
+ default y
+ help
+ This driver implements the front-end of the Xen virtual
+ block device driver. It communicates with a back-end driver
+ in another domain which drives the actual block device.
+
+config VIRTIO_BLK
+ tristate "Virtio block driver (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && VIRTIO
+ ---help---
+ This is the virtual block driver for virtio. It can be used with
+ lguest or QEMU based VMMs (like KVM or Xen). Say Y or M.
+
+config BLK_DEV_HD
+ bool "Very old hard disk (MFM/RLL/IDE) driver"
+ depends on HAVE_IDE
+ depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN
+ help
+ This is a very old hard disk driver that lacks the enhanced
+ functionality of the newer ones.
+
+ It is required for systems with ancient MFM/RLL/ESDI drives.
+
+ If unsure, say N.
+
+endif # BLK_DEV