libata/sff: Use ops->bmdma_stop instead of ata_bmdma_stop()

[safe/jmp/linux-2.6] / drivers / ata / sata_sil24.c

diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index ccee930..e6946fc 100644 (file)
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -51,13 +51,6 @@ struct sil24_sge {
        __le32  flags;
 };
 
-/*
- * Port multiplier
- */
-struct sil24_port_multiplier {
-       __le32  diag;
-       __le32  sactive;
-};
 
 enum {
        SIL24_HOST_BAR          = 0,
@@ -436,25 +429,25 @@ static const struct ata_port_info sil24_port_info[] = {
        {
                .flags          = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
                                  SIL24_FLAG_PCIX_IRQ_WOC,
-               .pio_mask       = 0x1f,                 /* pio0-4 */
-               .mwdma_mask     = 0x07,                 /* mwdma0-2 */
-               .udma_mask      = ATA_UDMA5,            /* udma0-5 */
+               .pio_mask       = ATA_PIO4,
+               .mwdma_mask     = ATA_MWDMA2,
+               .udma_mask      = ATA_UDMA5,
                .port_ops       = &sil24_ops,
        },
        /* sil_3132 */
        {
                .flags          = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
-               .pio_mask       = 0x1f,                 /* pio0-4 */
-               .mwdma_mask     = 0x07,                 /* mwdma0-2 */
-               .udma_mask      = ATA_UDMA5,            /* udma0-5 */
+               .pio_mask       = ATA_PIO4,
+               .mwdma_mask     = ATA_MWDMA2,
+               .udma_mask      = ATA_UDMA5,
                .port_ops       = &sil24_ops,
        },
        /* sil_3131/sil_3531 */
        {
                .flags          = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
-               .pio_mask       = 0x1f,                 /* pio0-4 */
-               .mwdma_mask     = 0x07,                 /* mwdma0-2 */
-               .udma_mask      = ATA_UDMA5,            /* udma0-5 */
+               .pio_mask       = ATA_PIO4,
+               .mwdma_mask     = ATA_MWDMA2,
+               .udma_mask      = ATA_UDMA5,
                .port_ops       = &sil24_ops,
        },
 };
@@ -853,6 +846,17 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc)
        if (!ata_is_atapi(qc->tf.protocol)) {
                prb = &cb->ata.prb;
                sge = cb->ata.sge;
+               if (ata_is_data(qc->tf.protocol)) {
+                       u16 prot = 0;
+                       ctrl = PRB_CTRL_PROTOCOL;
+                       if (ata_is_ncq(qc->tf.protocol))
+                               prot |= PRB_PROT_NCQ;
+                       if (qc->tf.flags & ATA_TFLAG_WRITE)
+                               prot |= PRB_PROT_WRITE;
+                       else
+                               prot |= PRB_PROT_READ;
+                       prb->prot = cpu_to_le16(prot);
+               }
        } else {
                prb = &cb->atapi.prb;
                sge = cb->atapi.sge;
@@ -1304,10 +1308,10 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
        host->iomap = iomap;
 
        /* configure and activate the device */
-       if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
-               rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+       if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+               rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
                if (rc) {
-                       rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+                       rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
                        if (rc) {
                                dev_printk(KERN_ERR, &pdev->dev,
                                           "64-bit DMA enable failed\n");
@@ -1315,13 +1319,13 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
                        }
                }
        } else {
-               rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+               rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
                if (rc) {
                        dev_printk(KERN_ERR, &pdev->dev,
                                   "32-bit DMA enable failed\n");
                        return rc;
                }
-               rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+               rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
                if (rc) {
                        dev_printk(KERN_ERR, &pdev->dev,
                                   "32-bit consistent DMA enable failed\n");