#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
NV_MMIO_BAR = 5,
NV_PORTS = 2,
- NV_PIO_MASK = 0x1f,
- NV_MWDMA_MASK = 0x07,
- NV_UDMA_MASK = 0x7f,
+ NV_PIO_MASK = ATA_PIO4,
+ NV_MWDMA_MASK = ATA_MWDMA2,
+ NV_UDMA_MASK = ATA_UDMA6,
NV_PORT0_SCR_REG_OFFSET = 0x00,
NV_PORT1_SCR_REG_OFFSET = 0x40,
void __iomem *ctl_block;
void __iomem *gen_block;
void __iomem *notifier_clear_block;
+ u64 adma_dma_mask;
u8 flags;
int last_issue_ncq;
};
};
struct nv_swncq_port_priv {
- struct ata_prd *prd; /* our SG list */
+ struct ata_bmdma_prd *prd; /* our SG list */
dma_addr_t prd_dma; /* and its DMA mapping */
void __iomem *sactive_block;
void __iomem *irq_block;
};
-#define NV_ADMA_CHECK_INTR(GCTL, PORT) ((GCTL) & ( 1 << (19 + (12 * (PORT)))))
+#define NV_ADMA_CHECK_INTR(GCTL, PORT) ((GCTL) & (1 << (19 + (12 * (PORT)))))
static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
#ifdef CONFIG_PM
static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance);
static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance);
static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance);
-static int nv_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
-static int nv_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
+static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
+static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
+static int nv_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
static void nv_nf2_freeze(struct ata_port *ap);
static void nv_nf2_thaw(struct ata_port *ap);
static void nv_ck804_freeze(struct ata_port *ap);
static void nv_ck804_thaw(struct ata_port *ap);
-static void nv_error_handler(struct ata_port *ap);
static int nv_adma_slave_config(struct scsi_device *sdev);
static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */
CK804,
ADMA,
+ MCP5x,
SWNCQ,
};
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2), CK804 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA), CK804 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2), CK804 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), SWNCQ },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), SWNCQ },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), SWNCQ },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), SWNCQ },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), MCP5x },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), MCP5x },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), MCP5x },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), MCP5x },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC },
};
static struct scsi_host_template nv_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct scsi_host_template nv_adma_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .change_queue_depth = ata_scsi_change_queue_depth,
+ ATA_NCQ_SHT(DRV_NAME),
.can_queue = NV_ADMA_MAX_CPBS,
- .this_id = ATA_SHT_THIS_ID,
.sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
.dma_boundary = NV_ADMA_DMA_BOUNDARY,
.slave_configure = nv_adma_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
};
static struct scsi_host_template nv_swncq_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .change_queue_depth = ata_scsi_change_queue_depth,
+ ATA_NCQ_SHT(DRV_NAME),
.can_queue = ATA_MAX_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = nv_swncq_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
};
-static const struct ata_port_operations nv_generic_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .exec_command = ata_exec_command,
- .check_status = ata_check_status,
- .dev_select = ata_std_dev_select,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = nv_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .data_xfer = ata_data_xfer,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
+/*
+ * NV SATA controllers have various different problems with hardreset
+ * protocol depending on the specific controller and device.
+ *
+ * GENERIC:
+ *
+ * bko11195 reports that link doesn't come online after hardreset on
+ * generic nv's and there have been several other similar reports on
+ * linux-ide.
+ *
+ * bko12351#c23 reports that warmplug on MCP61 doesn't work with
+ * softreset.
+ *
+ * NF2/3:
+ *
+ * bko3352 reports nf2/3 controllers can't determine device signature
+ * reliably after hardreset. The following thread reports detection
+ * failure on cold boot with the standard debouncing timing.
+ *
+ * http://thread.gmane.org/gmane.linux.ide/34098
+ *
+ * bko12176 reports that hardreset fails to bring up the link during
+ * boot on nf2.
+ *
+ * CK804:
+ *
+ * For initial probing after boot and hot plugging, hardreset mostly
+ * works fine on CK804 but curiously, reprobing on the initial port
+ * by rescanning or rmmod/insmod fails to acquire the initial D2H Reg
+ * FIS in somewhat undeterministic way.
+ *
+ * SWNCQ:
+ *
+ * bko12351 reports that when SWNCQ is enabled, for hotplug to work,
+ * hardreset should be used and hardreset can't report proper
+ * signature, which suggests that mcp5x is closer to nf2 as long as
+ * reset quirkiness is concerned.
+ *
+ * bko12703 reports that boot probing fails for intel SSD with
+ * hardreset. Link fails to come online. Softreset works fine.
+ *
+ * The failures are varied but the following patterns seem true for
+ * all flavors.
+ *
+ * - Softreset during boot always works.
+ *
+ * - Hardreset during boot sometimes fails to bring up the link on
+ * certain comibnations and device signature acquisition is
+ * unreliable.
+ *
+ * - Hardreset is often necessary after hotplug.
+ *
+ * So, preferring softreset for boot probing and error handling (as
+ * hardreset might bring down the link) but using hardreset for
+ * post-boot probing should work around the above issues in most
+ * cases. Define nv_hardreset() which only kicks in for post-boot
+ * probing and use it for all variants.
+ */
+static struct ata_port_operations nv_generic_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .lost_interrupt = ATA_OP_NULL,
.scr_read = nv_scr_read,
.scr_write = nv_scr_write,
- .port_start = ata_port_start,
+ .hardreset = nv_hardreset,
};
-static const struct ata_port_operations nv_nf2_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .exec_command = ata_exec_command,
- .check_status = ata_check_status,
- .dev_select = ata_std_dev_select,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
+static struct ata_port_operations nv_nf2_ops = {
+ .inherits = &nv_generic_ops,
.freeze = nv_nf2_freeze,
.thaw = nv_nf2_thaw,
- .error_handler = nv_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .data_xfer = ata_data_xfer,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
- .scr_read = nv_scr_read,
- .scr_write = nv_scr_write,
- .port_start = ata_port_start,
};
-static const struct ata_port_operations nv_ck804_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .exec_command = ata_exec_command,
- .check_status = ata_check_status,
- .dev_select = ata_std_dev_select,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
+static struct ata_port_operations nv_ck804_ops = {
+ .inherits = &nv_generic_ops,
.freeze = nv_ck804_freeze,
.thaw = nv_ck804_thaw,
- .error_handler = nv_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .data_xfer = ata_data_xfer,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
- .scr_read = nv_scr_read,
- .scr_write = nv_scr_write,
- .port_start = ata_port_start,
.host_stop = nv_ck804_host_stop,
};
-static const struct ata_port_operations nv_adma_ops = {
- .tf_load = ata_tf_load,
- .tf_read = nv_adma_tf_read,
+static struct ata_port_operations nv_adma_ops = {
+ .inherits = &nv_ck804_ops,
+
.check_atapi_dma = nv_adma_check_atapi_dma,
- .exec_command = ata_exec_command,
- .check_status = ata_check_status,
- .dev_select = ata_std_dev_select,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
+ .sff_tf_read = nv_adma_tf_read,
.qc_defer = ata_std_qc_defer,
.qc_prep = nv_adma_qc_prep,
.qc_issue = nv_adma_qc_issue,
+ .sff_irq_clear = nv_adma_irq_clear,
+
.freeze = nv_adma_freeze,
.thaw = nv_adma_thaw,
.error_handler = nv_adma_error_handler,
.post_internal_cmd = nv_adma_post_internal_cmd,
- .data_xfer = ata_data_xfer,
- .irq_clear = nv_adma_irq_clear,
- .irq_on = ata_irq_on,
- .scr_read = nv_scr_read,
- .scr_write = nv_scr_write,
+
.port_start = nv_adma_port_start,
.port_stop = nv_adma_port_stop,
#ifdef CONFIG_PM
.host_stop = nv_adma_host_stop,
};
-static const struct ata_port_operations nv_swncq_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .exec_command = ata_exec_command,
- .check_status = ata_check_status,
- .dev_select = ata_std_dev_select,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
+static struct ata_port_operations nv_swncq_ops = {
+ .inherits = &nv_generic_ops,
+
.qc_defer = ata_std_qc_defer,
.qc_prep = nv_swncq_qc_prep,
.qc_issue = nv_swncq_qc_issue,
+
.freeze = nv_mcp55_freeze,
.thaw = nv_mcp55_thaw,
.error_handler = nv_swncq_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .data_xfer = ata_data_xfer,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
- .scr_read = nv_scr_read,
- .scr_write = nv_scr_write,
+
#ifdef CONFIG_PM
.port_suspend = nv_swncq_port_suspend,
.port_resume = nv_swncq_port_resume,
.port_start = nv_swncq_port_start,
};
+struct nv_pi_priv {
+ irq_handler_t irq_handler;
+ struct scsi_host_template *sht;
+};
+
+#define NV_PI_PRIV(_irq_handler, _sht) \
+ &(struct nv_pi_priv){ .irq_handler = _irq_handler, .sht = _sht }
+
static const struct ata_port_info nv_port_info[] = {
/* generic */
{
- .sht = &nv_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_generic_ops,
- .irq_handler = nv_generic_interrupt,
+ .private_data = NV_PI_PRIV(nv_generic_interrupt, &nv_sht),
},
/* nforce2/3 */
{
- .sht = &nv_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_nf2_ops,
- .irq_handler = nv_nf2_interrupt,
+ .private_data = NV_PI_PRIV(nv_nf2_interrupt, &nv_sht),
},
/* ck804 */
{
- .sht = &nv_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_ck804_ops,
- .irq_handler = nv_ck804_interrupt,
+ .private_data = NV_PI_PRIV(nv_ck804_interrupt, &nv_sht),
},
/* ADMA */
{
- .sht = &nv_adma_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_NCQ,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_adma_ops,
- .irq_handler = nv_adma_interrupt,
+ .private_data = NV_PI_PRIV(nv_adma_interrupt, &nv_adma_sht),
+ },
+ /* MCP5x */
+ {
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+ .pio_mask = NV_PIO_MASK,
+ .mwdma_mask = NV_MWDMA_MASK,
+ .udma_mask = NV_UDMA_MASK,
+ .port_ops = &nv_generic_ops,
+ .private_data = NV_PI_PRIV(nv_generic_interrupt, &nv_sht),
},
/* SWNCQ */
{
- .sht = &nv_swncq_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_NCQ,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_swncq_ops,
- .irq_handler = nv_swncq_interrupt,
+ .private_data = NV_PI_PRIV(nv_swncq_interrupt, &nv_swncq_sht),
},
};
MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
-static int adma_enabled = 1;
-static int swncq_enabled;
+static int adma_enabled;
+static int swncq_enabled = 1;
+static int msi_enabled;
static void nv_adma_register_mode(struct ata_port *ap)
{
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
struct nv_adma_port_priv *pp = ap->private_data;
+ struct nv_adma_port_priv *port0, *port1;
+ struct scsi_device *sdev0, *sdev1;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- u64 bounce_limit;
- unsigned long segment_boundary;
+ unsigned long segment_boundary, flags;
unsigned short sg_tablesize;
int rc;
int adma_enable;
/* Not a proper libata device, ignore */
return rc;
+ spin_lock_irqsave(ap->lock, flags);
+
if (ap->link.device[sdev->id].class == ATA_DEV_ATAPI) {
/*
* NVIDIA reports that ADMA mode does not support ATAPI commands.
* Restrict DMA parameters as required by the legacy interface
* when an ATAPI device is connected.
*/
- bounce_limit = ATA_DMA_MASK;
segment_boundary = ATA_DMA_BOUNDARY;
/* Subtract 1 since an extra entry may be needed for padding, see
libata-scsi.c */
adma_enable = 0;
nv_adma_register_mode(ap);
} else {
- bounce_limit = *ap->dev->dma_mask;
segment_boundary = NV_ADMA_DMA_BOUNDARY;
sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN;
adma_enable = 1;
if (current_reg != new_reg)
pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, new_reg);
- blk_queue_bounce_limit(sdev->request_queue, bounce_limit);
+ port0 = ap->host->ports[0]->private_data;
+ port1 = ap->host->ports[1]->private_data;
+ sdev0 = ap->host->ports[0]->link.device[0].sdev;
+ sdev1 = ap->host->ports[1]->link.device[0].sdev;
+ if ((port0->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) ||
+ (port1->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)) {
+ /** We have to set the DMA mask to 32-bit if either port is in
+ ATAPI mode, since they are on the same PCI device which is
+ used for DMA mapping. If we set the mask we also need to set
+ the bounce limit on both ports to ensure that the block
+ layer doesn't feed addresses that cause DMA mapping to
+ choke. If either SCSI device is not allocated yet, it's OK
+ since that port will discover its correct setting when it
+ does get allocated.
+ Note: Setting 32-bit mask should not fail. */
+ if (sdev0)
+ blk_queue_bounce_limit(sdev0->request_queue,
+ ATA_DMA_MASK);
+ if (sdev1)
+ blk_queue_bounce_limit(sdev1->request_queue,
+ ATA_DMA_MASK);
+
+ pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ } else {
+ /** This shouldn't fail as it was set to this value before */
+ pci_set_dma_mask(pdev, pp->adma_dma_mask);
+ if (sdev0)
+ blk_queue_bounce_limit(sdev0->request_queue,
+ pp->adma_dma_mask);
+ if (sdev1)
+ blk_queue_bounce_limit(sdev1->request_queue,
+ pp->adma_dma_mask);
+ }
+
blk_queue_segment_boundary(sdev->request_queue, segment_boundary);
- blk_queue_max_hw_segments(sdev->request_queue, sg_tablesize);
+ blk_queue_max_segments(sdev->request_queue, sg_tablesize);
ata_port_printk(ap, KERN_INFO,
- "bounce limit 0x%llX, segment boundary 0x%lX, hw segs %hu\n",
- (unsigned long long)bounce_limit, segment_boundary, sg_tablesize);
+ "DMA mask 0x%llX, segment boundary 0x%lX, hw segs %hu\n",
+ (unsigned long long)*ap->host->dev->dma_mask,
+ segment_boundary, sg_tablesize);
+
+ spin_unlock_irqrestore(ap->lock, flags);
+
return rc;
}
static void nv_adma_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
- /* Since commands where a result TF is requested are not
- executed in ADMA mode, the only time this function will be called
- in ADMA mode will be if a command fails. In this case we
- don't care about going into register mode with ADMA commands
- pending, as the commands will all shortly be aborted anyway. */
+ /* Other than when internal or pass-through commands are executed,
+ the only time this function will be called in ADMA mode will be
+ if a command fails. In the failure case we don't care about going
+ into register mode with ADMA commands pending, as the commands will
+ all shortly be aborted anyway. We assume that NCQ commands are not
+ issued via passthrough, which is the only way that switching into
+ ADMA mode could abort outstanding commands. */
nv_adma_register_mode(ap);
- ata_tf_read(ap, tf);
+ ata_sff_tf_read(ap, tf);
}
static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, __le16 *cpb)
/* Notifier bits set without a command may indicate the drive
is misbehaving. Raise host state machine violation on this
condition. */
- ata_port_printk(ap, KERN_ERR, "notifier for tag %d with no command?\n",
- cpb_num);
+ ata_port_printk(ap, KERN_ERR,
+ "notifier for tag %d with no cmd?\n",
+ cpb_num);
ehi->err_mask |= AC_ERR_HSM;
- ehi->action |= ATA_EH_SOFTRESET;
+ ehi->action |= ATA_EH_RESET;
ata_port_freeze(ap);
return 1;
}
/* DEV interrupt w/ no active qc? */
if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
- ata_check_status(ap);
+ ata_sff_check_status(ap);
return 1;
}
/* handle interrupt */
- return ata_host_intr(ap, qc);
+ return ata_sff_host_intr(ap, qc);
}
static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
+ struct nv_adma_port_priv *pp = ap->private_data;
+ void __iomem *mmio = pp->ctl_block;
+ u16 status;
+ u32 gen_ctl;
+ u32 notifier, notifier_error;
+
notifier_clears[i] = 0;
- if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
- struct nv_adma_port_priv *pp = ap->private_data;
- void __iomem *mmio = pp->ctl_block;
- u16 status;
- u32 gen_ctl;
- u32 notifier, notifier_error;
-
- /* if ADMA is disabled, use standard ata interrupt handler */
- if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
- u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804)
- >> (NV_INT_PORT_SHIFT * i);
- handled += nv_host_intr(ap, irq_stat);
- continue;
- }
+ /* if ADMA is disabled, use standard ata interrupt handler */
+ if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
+ u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804)
+ >> (NV_INT_PORT_SHIFT * i);
+ handled += nv_host_intr(ap, irq_stat);
+ continue;
+ }
- /* if in ATA register mode, check for standard interrupts */
- if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
- u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804)
- >> (NV_INT_PORT_SHIFT * i);
- if (ata_tag_valid(ap->link.active_tag))
- /** NV_INT_DEV indication seems unreliable at times
- at least in ADMA mode. Force it on always when a
- command is active, to prevent losing interrupts. */
- irq_stat |= NV_INT_DEV;
- handled += nv_host_intr(ap, irq_stat);
- }
+ /* if in ATA register mode, check for standard interrupts */
+ if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
+ u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804)
+ >> (NV_INT_PORT_SHIFT * i);
+ if (ata_tag_valid(ap->link.active_tag))
+ /** NV_INT_DEV indication seems unreliable
+ at times at least in ADMA mode. Force it
+ on always when a command is active, to
+ prevent losing interrupts. */
+ irq_stat |= NV_INT_DEV;
+ handled += nv_host_intr(ap, irq_stat);
+ }
- notifier = readl(mmio + NV_ADMA_NOTIFIER);
- notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
- notifier_clears[i] = notifier | notifier_error;
-
- gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL);
-
- if (!NV_ADMA_CHECK_INTR(gen_ctl, ap->port_no) && !notifier &&
- !notifier_error)
- /* Nothing to do */
- continue;
-
- status = readw(mmio + NV_ADMA_STAT);
-
- /* Clear status. Ensure the controller sees the clearing before we start
- looking at any of the CPB statuses, so that any CPB completions after
- this point in the handler will raise another interrupt. */
- writew(status, mmio + NV_ADMA_STAT);
- readw(mmio + NV_ADMA_STAT); /* flush posted write */
- rmb();
-
- handled++; /* irq handled if we got here */
-
- /* freeze if hotplugged or controller error */
- if (unlikely(status & (NV_ADMA_STAT_HOTPLUG |
- NV_ADMA_STAT_HOTUNPLUG |
- NV_ADMA_STAT_TIMEOUT |
- NV_ADMA_STAT_SERROR))) {
- struct ata_eh_info *ehi = &ap->link.eh_info;
-
- ata_ehi_clear_desc(ehi);
- __ata_ehi_push_desc(ehi, "ADMA status 0x%08x: ", status);
- if (status & NV_ADMA_STAT_TIMEOUT) {
- ehi->err_mask |= AC_ERR_SYSTEM;
- ata_ehi_push_desc(ehi, "timeout");
- } else if (status & NV_ADMA_STAT_HOTPLUG) {
- ata_ehi_hotplugged(ehi);
- ata_ehi_push_desc(ehi, "hotplug");
- } else if (status & NV_ADMA_STAT_HOTUNPLUG) {
- ata_ehi_hotplugged(ehi);
- ata_ehi_push_desc(ehi, "hot unplug");
- } else if (status & NV_ADMA_STAT_SERROR) {
- /* let libata analyze SError and figure out the cause */
- ata_ehi_push_desc(ehi, "SError");
- } else
- ata_ehi_push_desc(ehi, "unknown");
- ata_port_freeze(ap);
- continue;
- }
+ notifier = readl(mmio + NV_ADMA_NOTIFIER);
+ notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
+ notifier_clears[i] = notifier | notifier_error;
+
+ gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL);
+
+ if (!NV_ADMA_CHECK_INTR(gen_ctl, ap->port_no) && !notifier &&
+ !notifier_error)
+ /* Nothing to do */
+ continue;
+
+ status = readw(mmio + NV_ADMA_STAT);
+
+ /*
+ * Clear status. Ensure the controller sees the
+ * clearing before we start looking at any of the CPB
+ * statuses, so that any CPB completions after this
+ * point in the handler will raise another interrupt.
+ */
+ writew(status, mmio + NV_ADMA_STAT);
+ readw(mmio + NV_ADMA_STAT); /* flush posted write */
+ rmb();
- if (status & (NV_ADMA_STAT_DONE |
- NV_ADMA_STAT_CPBERR)) {
- u32 check_commands;
- int pos, error = 0;
+ handled++; /* irq handled if we got here */
+ /* freeze if hotplugged or controller error */
+ if (unlikely(status & (NV_ADMA_STAT_HOTPLUG |
+ NV_ADMA_STAT_HOTUNPLUG |
+ NV_ADMA_STAT_TIMEOUT |
+ NV_ADMA_STAT_SERROR))) {
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+
+ ata_ehi_clear_desc(ehi);
+ __ata_ehi_push_desc(ehi, "ADMA status 0x%08x: ", status);
+ if (status & NV_ADMA_STAT_TIMEOUT) {
+ ehi->err_mask |= AC_ERR_SYSTEM;
+ ata_ehi_push_desc(ehi, "timeout");
+ } else if (status & NV_ADMA_STAT_HOTPLUG) {
+ ata_ehi_hotplugged(ehi);
+ ata_ehi_push_desc(ehi, "hotplug");
+ } else if (status & NV_ADMA_STAT_HOTUNPLUG) {
+ ata_ehi_hotplugged(ehi);
+ ata_ehi_push_desc(ehi, "hot unplug");
+ } else if (status & NV_ADMA_STAT_SERROR) {
+ /* let EH analyze SError and figure out cause */
+ ata_ehi_push_desc(ehi, "SError");
+ } else
+ ata_ehi_push_desc(ehi, "unknown");
+ ata_port_freeze(ap);
+ continue;
+ }
+
+ if (status & (NV_ADMA_STAT_DONE |
+ NV_ADMA_STAT_CPBERR |
+ NV_ADMA_STAT_CMD_COMPLETE)) {
+ u32 check_commands = notifier_clears[i];
+ int pos, error = 0;
+
+ if (status & NV_ADMA_STAT_CPBERR) {
+ /* check all active commands */
if (ata_tag_valid(ap->link.active_tag))
- check_commands = 1 << ap->link.active_tag;
+ check_commands = 1 <<
+ ap->link.active_tag;
else
check_commands = ap->link.sactive;
+ }
- /** Check CPBs for completed commands */
- while ((pos = ffs(check_commands)) && !error) {
- pos--;
- error = nv_adma_check_cpb(ap, pos,
- notifier_error & (1 << pos) );
- check_commands &= ~(1 << pos );
- }
+ /* check CPBs for completed commands */
+ while ((pos = ffs(check_commands)) && !error) {
+ pos--;
+ error = nv_adma_check_cpb(ap, pos,
+ notifier_error & (1 << pos));
+ check_commands &= ~(1 << pos);
}
}
}
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp & ~(NV_ADMA_CTL_AIEN | NV_ADMA_CTL_HOTPLUG_IEN),
mmio + NV_ADMA_CTL);
- readw(mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
}
static void nv_adma_thaw(struct ata_port *ap)
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | (NV_ADMA_CTL_AIEN | NV_ADMA_CTL_HOTPLUG_IEN),
mmio + NV_ADMA_CTL);
- readw(mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
}
static void nv_adma_irq_clear(struct ata_port *ap)
u32 notifier_clears[2];
if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
- ata_bmdma_irq_clear(ap);
+ ata_sff_irq_clear(ap);
return;
}
void *mem;
dma_addr_t mem_dma;
void __iomem *mmio;
+ struct pci_dev *pdev = to_pci_dev(dev);
u16 tmp;
VPRINTK("ENTER\n");
- rc = ata_port_start(ap);
+ /* Ensure DMA mask is set to 32-bit before allocating legacy PRD and
+ pad buffers */
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc)
+ return rc;
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc)
+ return rc;
+
+ /* we might fallback to bmdma, allocate bmdma resources */
+ rc = ata_bmdma_port_start(ap);
if (rc)
return rc;
pp->notifier_clear_block = pp->gen_block +
NV_ADMA_NOTIFIER_CLEAR + (4 * ap->port_no);
+ /* Now that the legacy PRD and padding buffer are allocated we can
+ safely raise the DMA mask to allocate the CPB/APRD table.
+ These are allowed to fail since we store the value that ends up
+ being used to set as the bounce limit in slave_config later if
+ needed. */
+ pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ pp->adma_dma_mask = *dev->dma_mask;
+
mem = dmam_alloc_coherent(dev, NV_ADMA_PORT_PRIV_DMA_SZ,
&mem_dma, GFP_KERNEL);
if (!mem)
pp->cpb_dma = mem_dma;
writel(mem_dma & 0xFFFFFFFF, mmio + NV_ADMA_CPB_BASE_LOW);
- writel((mem_dma >> 16 ) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH);
+ writel((mem_dma >> 16) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH);
mem += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ;
mem_dma += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ;
/* clear GO for register mode, enable interrupt */
tmp = readw(mmio + NV_ADMA_CTL);
- writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
- NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
+ writew((tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
+ NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw(mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
udelay(1);
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw(mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
return 0;
}
/* set CPB block location */
writel(pp->cpb_dma & 0xFFFFFFFF, mmio + NV_ADMA_CPB_BASE_LOW);
- writel((pp->cpb_dma >> 16 ) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH);
+ writel((pp->cpb_dma >> 16) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH);
/* clear any outstanding interrupt conditions */
writew(0xffff, mmio + NV_ADMA_STAT);
/* clear GO for register mode, enable interrupt */
tmp = readw(mmio + NV_ADMA_CTL);
- writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
- NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
+ writew((tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
+ NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw(mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
udelay(1);
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw(mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
return 0;
}
static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb)
{
struct nv_adma_port_priv *pp = qc->ap->private_data;
- unsigned int idx;
struct nv_adma_prd *aprd;
struct scatterlist *sg;
+ unsigned int si;
VPRINTK("ENTER\n");
- idx = 0;
-
- ata_for_each_sg(sg, qc) {
- aprd = (idx < 5) ? &cpb->aprd[idx] : &pp->aprd[NV_ADMA_SGTBL_LEN * qc->tag + (idx-5)];
- nv_adma_fill_aprd(qc, sg, idx, aprd);
- idx++;
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ aprd = (si < 5) ? &cpb->aprd[si] :
+ &pp->aprd[NV_ADMA_SGTBL_LEN * qc->tag + (si-5)];
+ nv_adma_fill_aprd(qc, sg, si, aprd);
}
- if (idx > 5)
+ if (si > 5)
cpb->next_aprd = cpu_to_le64(((u64)(pp->aprd_dma + NV_ADMA_SGTBL_SZ * qc->tag)));
else
cpb->next_aprd = cpu_to_le64(0);
struct nv_adma_port_priv *pp = qc->ap->private_data;
/* ADMA engine can only be used for non-ATAPI DMA commands,
- or interrupt-driven no-data commands, where a result taskfile
- is not required. */
+ or interrupt-driven no-data commands. */
if ((pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) ||
- (qc->tf.flags & ATA_TFLAG_POLLING) ||
- (qc->flags & ATA_QCFLAG_RESULT_TF))
+ (qc->tf.flags & ATA_TFLAG_POLLING))
return 1;
if ((qc->flags & ATA_QCFLAG_DMAMAP) ||
NV_CPB_CTL_IEN;
if (nv_adma_use_reg_mode(qc)) {
+ BUG_ON(!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) &&
+ (qc->flags & ATA_QCFLAG_DMAMAP));
nv_adma_register_mode(qc->ap);
- ata_qc_prep(qc);
+ ata_bmdma_qc_prep(qc);
return;
}
} else
memset(&cpb->aprd[0], 0, sizeof(struct nv_adma_prd) * 5);
- /* Be paranoid and don't let the device see NV_CPB_CTL_CPB_VALID until we are
- finished filling in all of the contents */
+ /* Be paranoid and don't let the device see NV_CPB_CTL_CPB_VALID
+ until we are finished filling in all of the contents */
wmb();
cpb->ctl_flags = ctl_flags;
wmb();
VPRINTK("ENTER\n");
+ /* We can't handle result taskfile with NCQ commands, since
+ retrieving the taskfile switches us out of ADMA mode and would abort
+ existing commands. */
+ if (unlikely(qc->tf.protocol == ATA_PROT_NCQ &&
+ (qc->flags & ATA_QCFLAG_RESULT_TF))) {
+ ata_dev_printk(qc->dev, KERN_ERR,
+ "NCQ w/ RESULT_TF not allowed\n");
+ return AC_ERR_SYSTEM;
+ }
+
if (nv_adma_use_reg_mode(qc)) {
/* use ATA register mode */
VPRINTK("using ATA register mode: 0x%lx\n", qc->flags);
+ BUG_ON(!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) &&
+ (qc->flags & ATA_QCFLAG_DMAMAP));
nv_adma_register_mode(qc->ap);
- return ata_qc_issue_prot(qc);
+ return ata_bmdma_qc_issue(qc);
} else
nv_adma_mode(qc->ap);
wmb();
if (curr_ncq != pp->last_issue_ncq) {
- /* Seems to need some delay before switching between NCQ and non-NCQ
- commands, else we get command timeouts and such. */
+ /* Seems to need some delay before switching between NCQ and
+ non-NCQ commands, else we get command timeouts and such. */
udelay(20);
pp->last_issue_ncq = curr_ncq;
}
writew(qc->tag, mmio + NV_ADMA_APPEND);
- DPRINTK("Issued tag %u\n",qc->tag);
+ DPRINTK("Issued tag %u\n", qc->tag);
return 0;
}
spin_lock_irqsave(&host->lock, flags);
for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap;
-
- ap = host->ports[i];
- if (ap &&
- !(ap->flags & ATA_FLAG_DISABLED)) {
- struct ata_queued_cmd *qc;
+ struct ata_port *ap = host->ports[i];
+ struct ata_queued_cmd *qc;
- qc = ata_qc_from_tag(ap, ap->link.active_tag);
- if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
- handled += ata_host_intr(ap, qc);
- else
- // No request pending? Clear interrupt status
- // anyway, in case there's one pending.
- ap->ops->check_status(ap);
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
+ handled += ata_sff_host_intr(ap, qc);
+ } else {
+ /*
+ * No request pending? Clear interrupt status
+ * anyway, in case there's one pending.
+ */
+ ap->ops->sff_check_status(ap);
}
-
}
spin_unlock_irqrestore(&host->lock, flags);
int i, handled = 0;
for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap = host->ports[i];
-
- if (ap && !(ap->flags & ATA_FLAG_DISABLED))
- handled += nv_host_intr(ap, irq_stat);
-
+ handled += nv_host_intr(host->ports[i], irq_stat);
irq_stat >>= NV_INT_PORT_SHIFT;
}
return ret;
}
-static int nv_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
+static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
{
if (sc_reg > SCR_CONTROL)
return -EINVAL;
- *val = ioread32(ap->ioaddr.scr_addr + (sc_reg * 4));
+ *val = ioread32(link->ap->ioaddr.scr_addr + (sc_reg * 4));
return 0;
}
-static int nv_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
+static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
{
if (sc_reg > SCR_CONTROL)
return -EINVAL;
- iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4));
+ iowrite32(val, link->ap->ioaddr.scr_addr + (sc_reg * 4));
return 0;
}
+static int nv_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_eh_context *ehc = &link->eh_context;
+
+ /* Do hardreset iff it's post-boot probing, please read the
+ * comment above port ops for details.
+ */
+ if (!(link->ap->pflags & ATA_PFLAG_LOADING) &&
+ !ata_dev_enabled(link->device))
+ sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
+ NULL, NULL);
+ else {
+ const unsigned long *timing = sata_ehc_deb_timing(ehc);
+ int rc;
+
+ if (!(ehc->i.flags & ATA_EHI_QUIET))
+ ata_link_printk(link, KERN_INFO, "nv: skipping "
+ "hardreset on occupied port\n");
+
+ /* make sure the link is online */
+ rc = sata_link_resume(link, timing, deadline);
+ /* whine about phy resume failure but proceed */
+ if (rc && rc != -EOPNOTSUPP)
+ ata_link_printk(link, KERN_WARNING, "failed to resume "
+ "link (errno=%d)\n", rc);
+ }
+
+ /* device signature acquisition is unreliable */
+ return -EAGAIN;
+}
+
static void nv_nf2_freeze(struct ata_port *ap)
{
void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr;
mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
mask &= ~(NV_INT_ALL_MCP55 << shift);
writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
- ata_bmdma_freeze(ap);
+ ata_sff_freeze(ap);
}
static void nv_mcp55_thaw(struct ata_port *ap)
mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
mask |= (NV_INT_MASK_MCP55 << shift);
writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
- ata_bmdma_thaw(ap);
-}
-
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- unsigned int dummy;
-
- /* SATA hardreset fails to retrieve proper device signature on
- * some controllers. Don't classify on hardreset. For more
- * info, see http://bugme.osdl.org/show_bug.cgi?id=3352
- */
- return sata_std_hardreset(link, &dummy, deadline);
-}
-
-static void nv_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
- nv_hardreset, ata_std_postreset);
+ ata_sff_thaw(ap);
}
static void nv_adma_error_handler(struct ata_port *ap)
u8 cpb_count = readb(mmio + NV_ADMA_CPB_COUNT);
u8 next_cpb_idx = readb(mmio + NV_ADMA_NEXT_CPB_IDX);
- ata_port_printk(ap, KERN_ERR, "EH in ADMA mode, notifier 0x%X "
+ ata_port_printk(ap, KERN_ERR,
+ "EH in ADMA mode, notifier 0x%X "
"notifier_error 0x%X gen_ctl 0x%X status 0x%X "
"next cpb count 0x%X next cpb idx 0x%x\n",
notifier, notifier_error, gen_ctl, status,
for (i = 0; i < NV_ADMA_MAX_CPBS; i++) {
struct nv_adma_cpb *cpb = &pp->cpb[i];
if ((ata_tag_valid(ap->link.active_tag) && i == ap->link.active_tag) ||
- ap->link.sactive & (1 << i) )
+ ap->link.sactive & (1 << i))
ata_port_printk(ap, KERN_ERR,
"CPB %d: ctl_flags 0x%x, resp_flags 0x%x\n",
i, cpb->ctl_flags, cpb->resp_flags);
/* Push us back into port register mode for error handling. */
nv_adma_register_mode(ap);
- /* Mark all of the CPBs as invalid to prevent them from being executed */
+ /* Mark all of the CPBs as invalid to prevent them from
+ being executed */
for (i = 0; i < NV_ADMA_MAX_CPBS; i++)
pp->cpb[i].ctl_flags &= ~NV_CPB_CTL_CPB_VALID;
readw(mmio + NV_ADMA_CTL); /* flush posted write */
}
- ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
- nv_hardreset, ata_std_postreset);
+ ata_bmdma_error_handler(ap);
}
static void nv_swncq_qc_to_dq(struct ata_port *ap, struct ata_queued_cmd *qc)
pp->dhfis_bits, pp->dmafis_bits, pp->sdbfis_bits);
ata_port_printk(ap, KERN_ERR, "ATA_REG 0x%X ERR_REG 0x%X\n",
- ap->ops->check_status(ap),
+ ap->ops->sff_check_status(ap),
ioread8(ap->ioaddr.error_addr));
sactive = readl(pp->sactive_block);
}
nv_swncq_pp_reinit(ap);
- ap->ops->irq_clear(ap);
+ ap->ops->sff_irq_clear(ap);
__ata_bmdma_stop(ap);
nv_swncq_irq_clear(ap, 0xffff);
}
if (ap->link.sactive) {
nv_swncq_ncq_stop(ap);
- ehc->i.action |= ATA_EH_HARDRESET;
+ ehc->i.action |= ATA_EH_RESET;
}
- ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
- nv_hardreset, ata_std_postreset);
+ ata_bmdma_error_handler(ap);
}
#ifdef CONFIG_PM
ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
if (strncmp(model_num, "Maxtor", 6) == 0) {
- ata_scsi_change_queue_depth(sdev, 1);
+ ata_scsi_change_queue_depth(sdev, 1, SCSI_QDEPTH_DEFAULT);
ata_dev_printk(dev, KERN_NOTICE,
"Disabling SWNCQ mode (depth %x)\n", sdev->queue_depth);
}
struct nv_swncq_port_priv *pp;
int rc;
- rc = ata_port_start(ap);
+ /* we might fallback to bmdma, allocate bmdma resources */
+ rc = ata_bmdma_port_start(ap);
if (rc)
return rc;
static void nv_swncq_qc_prep(struct ata_queued_cmd *qc)
{
if (qc->tf.protocol != ATA_PROT_NCQ) {
- ata_qc_prep(qc);
+ ata_bmdma_qc_prep(qc);
return;
}
{
struct ata_port *ap = qc->ap;
struct scatterlist *sg;
- unsigned int idx;
struct nv_swncq_port_priv *pp = ap->private_data;
- struct ata_prd *prd;
-
- WARN_ON(qc->__sg == NULL);
- WARN_ON(qc->n_elem == 0 && qc->pad_len == 0);
+ struct ata_bmdma_prd *prd;
+ unsigned int si, idx;
prd = pp->prd + ATA_MAX_PRD * qc->tag;
idx = 0;
- ata_for_each_sg(sg, qc) {
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
u32 addr, offset;
u32 sg_len, len;
}
}
- if (idx)
- prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+ prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
}
static unsigned int nv_swncq_issue_atacmd(struct ata_port *ap,
pp->dmafis_bits &= ~(1 << qc->tag);
pp->qc_active |= (0x1 << qc->tag);
- ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
- ap->ops->exec_command(ap, &qc->tf);
+ ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */
+ ap->ops->sff_exec_command(ap, &qc->tf);
DPRINTK("Issued tag %u\n", qc->tag);
struct nv_swncq_port_priv *pp = ap->private_data;
if (qc->tf.protocol != ATA_PROT_NCQ)
- return ata_qc_issue_prot(qc);
+ return ata_bmdma_qc_issue(qc);
DPRINTK("Enter\n");
ata_ehi_clear_desc(ehi);
ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
ehi->err_mask |= AC_ERR_HOST_BUS;
- ehi->action |= ATA_EH_SOFTRESET;
+ ehi->action |= ATA_EH_RESET;
return -EINVAL;
}
- ap->ops->irq_clear(ap);
+ ap->ops->sff_irq_clear(ap);
__ata_bmdma_stop(ap);
sactive = readl(pp->sactive_block);
ata_ehi_push_desc(ehi, "illegal SWNCQ:qc_active transition"
"(%08x->%08x)", pp->qc_active, sactive);
ehi->err_mask |= AC_ERR_HSM;
- ehi->action |= ATA_EH_HARDRESET;
+ ehi->action |= ATA_EH_RESET;
return -EINVAL;
}
for (i = 0; i < ATA_MAX_QUEUE; i++) {
u8 ata_stat;
int rc = 0;
- ata_stat = ap->ops->check_status(ap);
+ ata_stat = ap->ops->sff_check_status(ap);
nv_swncq_irq_clear(ap, fis);
if (!fis)
return;
if (!pp->qc_active)
return;
- if (ap->ops->scr_read(ap, SCR_ERROR, &serror))
+ if (ap->ops->scr_read(&ap->link, SCR_ERROR, &serror))
return;
- ap->ops->scr_write(ap, SCR_ERROR, serror);
+ ap->ops->scr_write(&ap->link, SCR_ERROR, serror);
if (ata_stat & ATA_ERR) {
ata_ehi_clear_desc(ehi);
ata_ehi_push_desc(ehi, "Ata error. fis:0x%X", fis);
ehi->err_mask |= AC_ERR_DEV;
ehi->serror |= serror;
- ehi->action |= ATA_EH_SOFTRESET;
+ ehi->action |= ATA_EH_RESET;
ata_port_freeze(ap);
return;
}
if (pp->ncq_flags & (ncq_saw_sdb | ncq_saw_backout)) {
ata_ehi_push_desc(ehi, "illegal fis transaction");
ehi->err_mask |= AC_ERR_HSM;
- ehi->action |= ATA_EH_HARDRESET;
+ ehi->action |= ATA_EH_RESET;
goto irq_error;
}
if (!(fis & NV_SWNCQ_IRQ_DMASETUP) &&
!(pp->ncq_flags & ncq_saw_dmas)) {
- ata_stat = ap->ops->check_status(ap);
+ ata_stat = ap->ops->sff_check_status(ap);
if (ata_stat & ATA_BUSY)
goto irq_exit;
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
- if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
- if (ap->link.sactive) {
- nv_swncq_host_interrupt(ap, (u16)irq_stat);
- handled = 1;
- } else {
- if (irq_stat) /* reserve Hotplug */
- nv_swncq_irq_clear(ap, 0xfff0);
+ if (ap->link.sactive) {
+ nv_swncq_host_interrupt(ap, (u16)irq_stat);
+ handled = 1;
+ } else {
+ if (irq_stat) /* reserve Hotplug */
+ nv_swncq_irq_clear(ap, 0xfff0);
- handled += nv_host_intr(ap, (u8)irq_stat);
- }
+ handled += nv_host_intr(ap, (u8)irq_stat);
}
irq_stat >>= NV_INT_PORT_SHIFT_MCP55;
}
return IRQ_RETVAL(handled);
}
-static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
- static int printed_version = 0;
+ static int printed_version;
const struct ata_port_info *ppi[] = { NULL, NULL };
+ struct nv_pi_priv *ipriv;
struct ata_host *host;
struct nv_host_priv *hpriv;
int rc;
// Make sure this is a SATA controller by counting the number of bars
// (NVIDIA SATA controllers will always have six bars). Otherwise,
// it's an IDE controller and we ignore it.
- for (bar=0; bar<6; bar++)
+ for (bar = 0; bar < 6; bar++)
if (pci_resource_start(pdev, bar) == 0)
return -ENODEV;
if (type == CK804 && adma_enabled) {
dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n");
type = ADMA;
+ } else if (type == MCP5x && swncq_enabled) {
+ dev_printk(KERN_NOTICE, &pdev->dev, "Using SWNCQ mode\n");
+ type = SWNCQ;
}
ppi[0] = &nv_port_info[type];
- rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+ ipriv = ppi[0]->private_data;
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
hpriv->type = type;
host->private_data = hpriv;
- /* set 64bit dma masks, may fail */
- if (type == ADMA) {
- if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0)
- pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
- }
-
/* request and iomap NV_MMIO_BAR */
rc = pcim_iomap_regions(pdev, 1 << NV_MMIO_BAR, DRV_NAME);
if (rc)
rc = nv_adma_host_init(host);
if (rc)
return rc;
- } else if (type == SWNCQ && swncq_enabled) {
- dev_printk(KERN_NOTICE, &pdev->dev, "Using SWNCQ mode\n");
+ } else if (type == SWNCQ)
nv_swncq_host_init(host);
+
+ if (msi_enabled) {
+ dev_printk(KERN_NOTICE, &pdev->dev, "Using MSI\n");
+ pci_enable_msi(pdev);
}
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ppi[0]->irq_handler,
- IRQF_SHARED, ppi[0]->sht);
+ return ata_pci_sff_activate_host(host, ipriv->irq_handler, ipriv->sht);
}
#ifdef CONFIG_PM
pp = host->ports[0]->private_data;
if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT0_EN |
- NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
+ NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
else
tmp32 |= (NV_MCP_SATA_CFG_20_PORT0_EN |
- NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
+ NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
pp = host->ports[1]->private_data;
if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT1_EN |
- NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
+ NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
else
tmp32 |= (NV_MCP_SATA_CFG_20_PORT1_EN |
- NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
+ NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
}
module_init(nv_init);
module_exit(nv_exit);
module_param_named(adma, adma_enabled, bool, 0444);
-MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: true)");
+MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)");
module_param_named(swncq, swncq_enabled, bool, 0444);
-MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: false)");
+MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)");
+module_param_named(msi, msi_enabled, bool, 0444);
+MODULE_PARM_DESC(msi, "Enable use of MSI (Default: false)");
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff