/*
* sata_mv.c - Marvell SATA support
*
+ * Copyright 2008: Marvell Corporation, all rights reserved.
* Copyright 2005: EMC Corporation, all rights reserved.
* Copyright 2005 Red Hat, Inc. All rights reserved.
*
*/
/*
- sata_mv TODO list:
-
- 1) Needs a full errata audit for all chipsets. I implemented most
- of the errata workarounds found in the Marvell vendor driver, but
- I distinctly remember a couple workarounds (one related to PCI-X)
- are still needed.
-
- 4) Add NCQ support (easy to intermediate, once new-EH support appears)
-
- 5) Investigate problems with PCI Message Signalled Interrupts (MSI).
-
- 6) Add port multiplier support (intermediate)
-
- 8) Develop a low-power-consumption strategy, and implement it.
-
- 9) [Experiment, low priority] See if ATAPI can be supported using
- "unknown FIS" or "vendor-specific FIS" support, or something creative
- like that.
-
- 10) [Experiment, low priority] Investigate interrupt coalescing.
- Quite often, especially with PCI Message Signalled Interrupts (MSI),
- the overhead reduced by interrupt mitigation is quite often not
- worth the latency cost.
-
- 11) [Experiment, Marvell value added] Is it possible to use target
- mode to cross-connect two Linux boxes with Marvell cards? If so,
- creating LibATA target mode support would be very interesting.
-
- Target mode, for those without docs, is the ability to directly
- connect two SATA controllers.
-
- 13) Verify that 7042 is fully supported. I only have a 6042.
-
-*/
-
+ * sata_mv TODO list:
+ *
+ * --> Errata workaround for NCQ device errors.
+ *
+ * --> More errata workarounds for PCI-X.
+ *
+ * --> Complete a full errata audit for all chipsets to identify others.
+ *
+ * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it).
+ *
+ * --> Investigate problems with PCI Message Signalled Interrupts (MSI).
+ *
+ * --> Cache frequently-accessed registers in mv_port_priv to reduce overhead.
+ *
+ * --> Develop a low-power-consumption strategy, and implement it.
+ *
+ * --> [Experiment, low priority] Investigate interrupt coalescing.
+ * Quite often, especially with PCI Message Signalled Interrupts (MSI),
+ * the overhead reduced by interrupt mitigation is quite often not
+ * worth the latency cost.
+ *
+ * --> [Experiment, Marvell value added] Is it possible to use target
+ * mode to cross-connect two Linux boxes with Marvell cards? If so,
+ * creating LibATA target mode support would be very interesting.
+ *
+ * Target mode, for those without docs, is the ability to directly
+ * connect two SATA ports.
+ */
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/dmapool.h>
#include <linux/dma-mapping.h>
#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mbus.h>
+#include <linux/bitops.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <linux/libata.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "1.01"
+#define DRV_VERSION "1.24"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
MV_IRQ_COAL_TIME_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xd0),
MV_SATAHC0_REG_BASE = 0x20000,
- MV_FLASH_CTL = 0x1046c,
- MV_GPIO_PORT_CTL = 0x104f0,
- MV_RESET_CFG = 0x180d8,
+ MV_FLASH_CTL_OFS = 0x1046c,
+ MV_GPIO_PORT_CTL_OFS = 0x104f0,
+ MV_RESET_CFG_OFS = 0x180d8,
MV_PCI_REG_SZ = MV_MAJOR_REG_AREA_SZ,
MV_SATAHC_REG_SZ = MV_MAJOR_REG_AREA_SZ,
/* CRQB needs alignment on a 1KB boundary. Size == 1KB
* CRPB needs alignment on a 256B boundary. Size == 256B
- * SG count of 176 leads to MV_PORT_PRIV_DMA_SZ == 4KB
* ePRD (SG) entries need alignment on a 16B boundary. Size == 16B
*/
MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH),
MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH),
- MV_MAX_SG_CT = 176,
+ MV_MAX_SG_CT = 256,
MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT),
- MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ),
- MV_PORTS_PER_HC = 4,
- /* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */
+ /* Determine hc from 0-7 port: hc = port >> MV_PORT_HC_SHIFT */
MV_PORT_HC_SHIFT = 2,
- /* == (port % MV_PORTS_PER_HC) to determine hard port from 0-7 port */
- MV_PORT_MASK = 3,
+ MV_PORTS_PER_HC = (1 << MV_PORT_HC_SHIFT), /* 4 */
+ /* Determine hc port from 0-7 port: hardport = port & MV_PORT_MASK */
+ MV_PORT_MASK = (MV_PORTS_PER_HC - 1), /* 3 */
/* Host Flags */
MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
+
MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
ATA_FLAG_PIO_POLLING,
+
MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE,
+ MV_GENIIE_FLAGS = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
+ ATA_FLAG_NCQ | ATA_FLAG_AN,
+
CRQB_FLAG_READ = (1 << 0),
CRQB_TAG_SHIFT = 1,
CRQB_IOID_SHIFT = 6, /* CRQB Gen-II/IIE IO Id shift */
+ CRQB_PMP_SHIFT = 12, /* CRQB Gen-II/IIE PMP shift */
CRQB_HOSTQ_SHIFT = 17, /* CRQB Gen-II/IIE HostQueTag shift */
CRQB_CMD_ADDR_SHIFT = 8,
CRQB_CMD_CS = (0x2 << 11),
/* PCI interface registers */
PCI_COMMAND_OFS = 0xc00,
+ PCI_COMMAND_MRDTRIG = (1 << 7), /* PCI Master Read Trigger */
PCI_MAIN_CMD_STS_OFS = 0xd30,
STOP_PCI_MASTER = (1 << 2),
PCI_MASTER_EMPTY = (1 << 3),
GLOB_SFT_RST = (1 << 4),
- MV_PCI_MODE = 0xd00,
+ MV_PCI_MODE_OFS = 0xd00,
+ MV_PCI_MODE_MASK = 0x30,
+
MV_PCI_EXP_ROM_BAR_CTL = 0xd2c,
MV_PCI_DISC_TIMER = 0xd04,
MV_PCI_MSI_TRIGGER = 0xc38,
MV_PCI_SERR_MASK = 0xc28,
- MV_PCI_XBAR_TMOUT = 0x1d04,
+ MV_PCI_XBAR_TMOUT_OFS = 0x1d04,
MV_PCI_ERR_LOW_ADDRESS = 0x1d40,
MV_PCI_ERR_HIGH_ADDRESS = 0x1d44,
MV_PCI_ERR_ATTRIBUTE = 0x1d48,
PCIE_IRQ_CAUSE_OFS = 0x1900,
PCIE_IRQ_MASK_OFS = 0x1910,
- PCIE_UNMASK_ALL_IRQS = 0x70a, /* assorted bits */
-
- HC_MAIN_IRQ_CAUSE_OFS = 0x1d60,
- HC_MAIN_IRQ_MASK_OFS = 0x1d64,
- PORT0_ERR = (1 << 0), /* shift by port # */
- PORT0_DONE = (1 << 1), /* shift by port # */
+ PCIE_UNMASK_ALL_IRQS = 0x40a, /* assorted bits */
+
+ /* Host Controller Main Interrupt Cause/Mask registers (1 per-chip) */
+ PCI_HC_MAIN_IRQ_CAUSE_OFS = 0x1d60,
+ PCI_HC_MAIN_IRQ_MASK_OFS = 0x1d64,
+ SOC_HC_MAIN_IRQ_CAUSE_OFS = 0x20020,
+ SOC_HC_MAIN_IRQ_MASK_OFS = 0x20024,
+ ERR_IRQ = (1 << 0), /* shift by port # */
+ DONE_IRQ = (1 << 1), /* shift by port # */
HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */
HC_SHIFT = 9, /* bits 9-17 = HC1's ports */
PCI_ERR = (1 << 18),
TWSI_INT = (1 << 24),
HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */
HC_MAIN_RSVD_5 = (0x1fff << 19), /* bits 31-19 */
- HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE |
- PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT |
- HC_MAIN_RSVD),
- HC_MAIN_MASKED_IRQS_5 = (PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE |
- HC_MAIN_RSVD_5),
+ HC_MAIN_RSVD_SOC = (0x3fffffb << 6), /* bits 31-9, 7-6 */
/* SATAHC registers */
HC_CFG_OFS = 0,
HC_IRQ_CAUSE_OFS = 0x14,
- CRPB_DMA_DONE = (1 << 0), /* shift by port # */
- HC_IRQ_COAL = (1 << 4), /* IRQ coalescing */
+ DMA_IRQ = (1 << 0), /* shift by port # */
+ HC_COAL_IRQ = (1 << 4), /* IRQ coalescing */
DEV_IRQ = (1 << 8), /* shift by port # */
/* Shadow block registers */
/* SATA registers */
SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */
SATA_ACTIVE_OFS = 0x350,
+ SATA_FIS_IRQ_CAUSE_OFS = 0x364,
+ SATA_FIS_IRQ_AN = (1 << 9), /* async notification */
+
+ LTMODE_OFS = 0x30c,
+ LTMODE_BIT8 = (1 << 8), /* unknown, but necessary */
+
PHY_MODE3 = 0x310,
PHY_MODE4 = 0x314,
+ PHY_MODE4_CFG_MASK = 0x00000003, /* phy internal config field */
+ PHY_MODE4_CFG_VALUE = 0x00000001, /* phy internal config field */
+ PHY_MODE4_RSVD_ZEROS = 0x5de3fffa, /* Gen2e always write zeros */
+ PHY_MODE4_RSVD_ONES = 0x00000005, /* Gen2e always write ones */
+
PHY_MODE2 = 0x330,
+ SATA_IFCTL_OFS = 0x344,
+ SATA_TESTCTL_OFS = 0x348,
+ SATA_IFSTAT_OFS = 0x34c,
+ VENDOR_UNIQUE_FIS_OFS = 0x35c,
+
+ FISCFG_OFS = 0x360,
+ FISCFG_WAIT_DEV_ERR = (1 << 8), /* wait for host on DevErr */
+ FISCFG_SINGLE_SYNC = (1 << 16), /* SYNC on DMA activation */
+
MV5_PHY_MODE = 0x74,
- MV5_LT_MODE = 0x30,
- MV5_PHY_CTL = 0x0C,
- SATA_INTERFACE_CTL = 0x050,
+ MV5_LTMODE_OFS = 0x30,
+ MV5_PHY_CTL_OFS = 0x0C,
+ SATA_INTERFACE_CFG_OFS = 0x050,
MV_M2_PREAMP_MASK = 0x7e0,
/* Port registers */
EDMA_CFG_OFS = 0,
- EDMA_CFG_Q_DEPTH = 0, /* queueing disabled */
- EDMA_CFG_NCQ = (1 << 5),
- EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */
- EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */
- EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */
+ EDMA_CFG_Q_DEPTH = 0x1f, /* max device queue depth */
+ EDMA_CFG_NCQ = (1 << 5), /* for R/W FPDMA queued */
+ EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */
+ EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */
+ EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */
+ EDMA_CFG_EDMA_FBS = (1 << 16), /* EDMA FIS-Based Switching */
+ EDMA_CFG_FBS = (1 << 26), /* FIS-Based Switching */
EDMA_ERR_IRQ_CAUSE_OFS = 0x8,
EDMA_ERR_IRQ_MASK_OFS = 0xc,
EDMA_ERR_CRPB_PAR = (1 << 10), /* CRPB parity error */
EDMA_ERR_INTRL_PAR = (1 << 11), /* internal parity error */
EDMA_ERR_IORDY = (1 << 12), /* IORdy timeout */
+
EDMA_ERR_LNK_CTRL_RX = (0xf << 13), /* link ctrl rx error */
- EDMA_ERR_LNK_CTRL_RX_2 = (1 << 15),
+ EDMA_ERR_LNK_CTRL_RX_0 = (1 << 13), /* transient: CRC err */
+ EDMA_ERR_LNK_CTRL_RX_1 = (1 << 14), /* transient: FIFO err */
+ EDMA_ERR_LNK_CTRL_RX_2 = (1 << 15), /* fatal: caught SYNC */
+ EDMA_ERR_LNK_CTRL_RX_3 = (1 << 16), /* transient: FIS rx err */
+
EDMA_ERR_LNK_DATA_RX = (0xf << 17), /* link data rx error */
+
EDMA_ERR_LNK_CTRL_TX = (0x1f << 21), /* link ctrl tx error */
+ EDMA_ERR_LNK_CTRL_TX_0 = (1 << 21), /* transient: CRC err */
+ EDMA_ERR_LNK_CTRL_TX_1 = (1 << 22), /* transient: FIFO err */
+ EDMA_ERR_LNK_CTRL_TX_2 = (1 << 23), /* transient: caught SYNC */
+ EDMA_ERR_LNK_CTRL_TX_3 = (1 << 24), /* transient: caught DMAT */
+ EDMA_ERR_LNK_CTRL_TX_4 = (1 << 25), /* transient: FIS collision */
+
EDMA_ERR_LNK_DATA_TX = (0x1f << 26), /* link data tx error */
+
EDMA_ERR_TRANS_PROTO = (1 << 31), /* transport protocol error */
EDMA_ERR_OVERRUN_5 = (1 << 5),
EDMA_ERR_UNDERRUN_5 = (1 << 6),
+
+ EDMA_ERR_IRQ_TRANSIENT = EDMA_ERR_LNK_CTRL_RX_0 |
+ EDMA_ERR_LNK_CTRL_RX_1 |
+ EDMA_ERR_LNK_CTRL_RX_3 |
+ EDMA_ERR_LNK_CTRL_TX,
+
EDMA_EH_FREEZE = EDMA_ERR_D_PAR |
EDMA_ERR_PRD_PAR |
EDMA_ERR_DEV_DCON |
EDMA_ERR_LNK_DATA_RX |
EDMA_ERR_LNK_DATA_TX |
EDMA_ERR_TRANS_PROTO,
+
EDMA_EH_FREEZE_5 = EDMA_ERR_D_PAR |
EDMA_ERR_PRD_PAR |
EDMA_ERR_DEV_DCON |
EDMA_CMD_OFS = 0x28, /* EDMA command register */
EDMA_EN = (1 << 0), /* enable EDMA */
EDMA_DS = (1 << 1), /* disable EDMA; self-negated */
- ATA_RST = (1 << 2), /* reset trans/link/phy */
+ EDMA_RESET = (1 << 2), /* reset eng/trans/link/phy */
+
+ EDMA_STATUS_OFS = 0x30, /* EDMA engine status */
+ EDMA_STATUS_CACHE_EMPTY = (1 << 6), /* GenIIe command cache empty */
+ EDMA_STATUS_IDLE = (1 << 7), /* GenIIe EDMA enabled/idle */
+
+ EDMA_IORDY_TMOUT_OFS = 0x34,
+ EDMA_ARB_CFG_OFS = 0x38,
+
+ EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */
- EDMA_IORDY_TMOUT = 0x34,
- EDMA_ARB_CFG = 0x38,
+ GEN_II_NCQ_MAX_SECTORS = 256, /* max sects/io on Gen2 w/NCQ */
/* Host private flags (hp_flags) */
MV_HP_FLAG_MSI = (1 << 0),
MV_HP_ERRATA_50XXB2 = (1 << 2),
MV_HP_ERRATA_60X1B2 = (1 << 3),
MV_HP_ERRATA_60X1C0 = (1 << 4),
- MV_HP_ERRATA_XX42A0 = (1 << 5),
MV_HP_GEN_I = (1 << 6), /* Generation I: 50xx */
MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */
MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */
MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */
+ MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */
+ MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */
/* Port private flags (pp_flags) */
MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
- MV_PP_FLAG_HAD_A_RESET = (1 << 2), /* 1st hard reset complete? */
+ MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */
+ MV_PP_FLAG_FBS_EN = (1 << 2), /* is EDMA set up for FBS? */
+ MV_PP_FLAG_DELAYED_EH = (1 << 3), /* delayed dev err handling */
};
#define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I)
#define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II)
#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
+#define IS_PCIE(hpriv) ((hpriv)->hp_flags & MV_HP_PCIE)
+#define IS_SOC(hpriv) ((hpriv)->hp_flags & MV_HP_FLAG_SOC)
+
+#define WINDOW_CTRL(i) (0x20030 + ((i) << 4))
+#define WINDOW_BASE(i) (0x20034 + ((i) << 4))
enum {
/* DMA boundary 0xffff is required by the s/g splitting
chip_608x,
chip_6042,
chip_7042,
+ chip_soc,
};
/* Command ReQuest Block: 32B */
dma_addr_t crqb_dma;
struct mv_crpb *crpb;
dma_addr_t crpb_dma;
- struct mv_sg *sg_tbl;
- dma_addr_t sg_tbl_dma;
+ struct mv_sg *sg_tbl[MV_MAX_Q_DEPTH];
+ dma_addr_t sg_tbl_dma[MV_MAX_Q_DEPTH];
unsigned int req_idx;
unsigned int resp_idx;
u32 pp_flags;
+ unsigned int delayed_eh_pmp_map;
};
struct mv_port_signal {
struct mv_host_priv {
u32 hp_flags;
+ u32 main_irq_mask;
struct mv_port_signal signal[8];
const struct mv_hw_ops *ops;
+ int n_ports;
+ void __iomem *base;
+ void __iomem *main_irq_cause_addr;
+ void __iomem *main_irq_mask_addr;
u32 irq_cause_ofs;
u32 irq_mask_ofs;
u32 unmask_all_irqs;
+ /*
+ * These consistent DMA memory pools give us guaranteed
+ * alignment for hardware-accessed data structures,
+ * and less memory waste in accomplishing the alignment.
+ */
+ struct dma_pool *crqb_pool;
+ struct dma_pool *crpb_pool;
+ struct dma_pool *sg_tbl_pool;
};
struct mv_hw_ops {
int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int n_hc);
void (*reset_flash)(struct mv_host_priv *hpriv, void __iomem *mmio);
- void (*reset_bus)(struct pci_dev *pdev, void __iomem *mmio);
+ void (*reset_bus)(struct ata_host *host, void __iomem *mmio);
};
-static void mv_irq_clear(struct ata_port *ap);
-static int mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val);
-static int mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
-static int mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val);
-static int mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
+static int mv_scr_read(struct ata_link *link, unsigned int sc_reg_in, u32 *val);
+static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val);
+static int mv5_scr_read(struct ata_link *link, unsigned int sc_reg_in, u32 *val);
+static int mv5_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val);
static int mv_port_start(struct ata_port *ap);
static void mv_port_stop(struct ata_port *ap);
+static int mv_qc_defer(struct ata_queued_cmd *qc);
static void mv_qc_prep(struct ata_queued_cmd *qc);
static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
-static void mv_error_handler(struct ata_port *ap);
-static void mv_post_int_cmd(struct ata_queued_cmd *qc);
+static int mv_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
static void mv_eh_freeze(struct ata_port *ap);
static void mv_eh_thaw(struct ata_port *ap);
-static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+static void mv6_dev_config(struct ata_device *dev);
static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port);
static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int n_hc);
static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
-static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio);
+static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio);
static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port);
static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int n_hc);
static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
-static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio);
-static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
+static void mv_soc_enable_leds(struct mv_host_priv *hpriv,
+ void __iomem *mmio);
+static void mv_soc_read_preamp(struct mv_host_priv *hpriv, int idx,
+ void __iomem *mmio);
+static int mv_soc_reset_hc(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int n_hc);
+static void mv_soc_reset_flash(struct mv_host_priv *hpriv,
+ void __iomem *mmio);
+static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio);
+static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio);
+static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port_no);
-
+static int mv_stop_edma(struct ata_port *ap);
+static int mv_stop_edma_engine(void __iomem *port_mmio);
+static void mv_edma_cfg(struct ata_port *ap, int want_ncq);
+
+static void mv_pmp_select(struct ata_port *ap, int pmp);
+static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static int mv_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static void mv_pmp_error_handler(struct ata_port *ap);
+static void mv_process_crpb_entries(struct ata_port *ap,
+ struct mv_port_priv *pp);
+
+/* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below
+ * because we have to allow room for worst case splitting of
+ * PRDs for 64K boundaries in mv_fill_sg().
+ */
static struct scsi_host_template mv5_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
+ ATA_BASE_SHT(DRV_NAME),
.sg_tablesize = MV_MAX_SG_CT / 2,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = 1,
- .proc_name = DRV_NAME,
.dma_boundary = MV_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
};
static struct scsi_host_template mv6_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
+ ATA_NCQ_SHT(DRV_NAME),
+ .can_queue = MV_MAX_Q_DEPTH - 1,
.sg_tablesize = MV_MAX_SG_CT / 2,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = 1,
- .proc_name = DRV_NAME,
.dma_boundary = MV_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
};
-static const struct ata_port_operations mv5_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .cable_detect = ata_cable_sata,
+static struct ata_port_operations mv5_ops = {
+ .inherits = &ata_sff_port_ops,
+ .qc_defer = mv_qc_defer,
.qc_prep = mv_qc_prep,
.qc_issue = mv_qc_issue,
- .data_xfer = ata_data_xfer,
-
- .irq_clear = mv_irq_clear,
- .irq_on = ata_irq_on,
- .error_handler = mv_error_handler,
- .post_internal_cmd = mv_post_int_cmd,
.freeze = mv_eh_freeze,
.thaw = mv_eh_thaw,
+ .hardreset = mv_hardreset,
+ .error_handler = ata_std_error_handler, /* avoid SFF EH */
+ .post_internal_cmd = ATA_OP_NULL,
.scr_read = mv5_scr_read,
.scr_write = mv5_scr_write,
.port_stop = mv_port_stop,
};
-static const struct ata_port_operations mv6_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .cable_detect = ata_cable_sata,
-
- .qc_prep = mv_qc_prep,
- .qc_issue = mv_qc_issue,
- .data_xfer = ata_data_xfer,
-
- .irq_clear = mv_irq_clear,
- .irq_on = ata_irq_on,
-
- .error_handler = mv_error_handler,
- .post_internal_cmd = mv_post_int_cmd,
- .freeze = mv_eh_freeze,
- .thaw = mv_eh_thaw,
-
+static struct ata_port_operations mv6_ops = {
+ .inherits = &mv5_ops,
+ .dev_config = mv6_dev_config,
.scr_read = mv_scr_read,
.scr_write = mv_scr_write,
- .port_start = mv_port_start,
- .port_stop = mv_port_stop,
+ .pmp_hardreset = mv_pmp_hardreset,
+ .pmp_softreset = mv_softreset,
+ .softreset = mv_softreset,
+ .error_handler = mv_pmp_error_handler,
};
-static const struct ata_port_operations mv_iie_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .cable_detect = ata_cable_sata,
-
+static struct ata_port_operations mv_iie_ops = {
+ .inherits = &mv6_ops,
+ .dev_config = ATA_OP_NULL,
.qc_prep = mv_qc_prep_iie,
- .qc_issue = mv_qc_issue,
- .data_xfer = ata_data_xfer,
-
- .irq_clear = mv_irq_clear,
- .irq_on = ata_irq_on,
-
- .error_handler = mv_error_handler,
- .post_internal_cmd = mv_post_int_cmd,
- .freeze = mv_eh_freeze,
- .thaw = mv_eh_thaw,
-
- .scr_read = mv_scr_read,
- .scr_write = mv_scr_write,
-
- .port_start = mv_port_start,
- .port_stop = mv_port_stop,
};
static const struct ata_port_info mv_port_info[] = {
.port_ops = &mv5_ops,
},
{ /* chip_604x */
- .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS,
+ .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
+ ATA_FLAG_NCQ,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv6_ops,
},
{ /* chip_608x */
.flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
- MV_FLAG_DUAL_HC,
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
+ ATA_FLAG_NCQ | MV_FLAG_DUAL_HC,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv6_ops,
},
{ /* chip_6042 */
- .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS,
+ .flags = MV_GENIIE_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv_iie_ops,
},
{ /* chip_7042 */
- .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS,
+ .flags = MV_GENIIE_FLAGS,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &mv_iie_ops,
+ },
+ { /* chip_soc */
+ .flags = MV_GENIIE_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv_iie_ops,
{ PCI_VDEVICE(MARVELL, 0x5041), chip_504x },
{ PCI_VDEVICE(MARVELL, 0x5080), chip_5080 },
{ PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
- /* RocketRAID 1740/174x have different identifiers */
+ /* RocketRAID 1720/174x have different identifiers */
+ { PCI_VDEVICE(TTI, 0x1720), chip_6042 },
{ PCI_VDEVICE(TTI, 0x1740), chip_508x },
{ PCI_VDEVICE(TTI, 0x1742), chip_508x },
{ } /* terminate list */
};
-static struct pci_driver mv_pci_driver = {
- .name = DRV_NAME,
- .id_table = mv_pci_tbl,
- .probe = mv_init_one,
- .remove = ata_pci_remove_one,
-};
-
static const struct mv_hw_ops mv5xxx_ops = {
.phy_errata = mv5_phy_errata,
.enable_leds = mv5_enable_leds,
.reset_bus = mv_reset_pci_bus,
};
-/*
- * module options
- */
-static int msi; /* Use PCI msi; either zero (off, default) or non-zero */
-
-
-/* move to PCI layer or libata core? */
-static int pci_go_64(struct pci_dev *pdev)
-{
- int rc;
-
- if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
- if (rc) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "64-bit DMA enable failed\n");
- return rc;
- }
- }
- } else {
- rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "32-bit DMA enable failed\n");
- return rc;
- }
- rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "32-bit consistent DMA enable failed\n");
- return rc;
- }
- }
-
- return rc;
-}
+static const struct mv_hw_ops mv_soc_ops = {
+ .phy_errata = mv6_phy_errata,
+ .enable_leds = mv_soc_enable_leds,
+ .read_preamp = mv_soc_read_preamp,
+ .reset_hc = mv_soc_reset_hc,
+ .reset_flash = mv_soc_reset_flash,
+ .reset_bus = mv_soc_reset_bus,
+};
/*
* Functions
(void) readl(addr); /* flush to avoid PCI posted write */
}
-static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc)
-{
- return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ));
-}
-
static inline unsigned int mv_hc_from_port(unsigned int port)
{
return port >> MV_PORT_HC_SHIFT;
return port & MV_PORT_MASK;
}
+/*
+ * Consolidate some rather tricky bit shift calculations.
+ * This is hot-path stuff, so not a function.
+ * Simple code, with two return values, so macro rather than inline.
+ *
+ * port is the sole input, in range 0..7.
+ * shift is one output, for use with main_irq_cause / main_irq_mask registers.
+ * hardport is the other output, in range 0..3.
+ *
+ * Note that port and hardport may be the same variable in some cases.
+ */
+#define MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport) \
+{ \
+ shift = mv_hc_from_port(port) * HC_SHIFT; \
+ hardport = mv_hardport_from_port(port); \
+ shift += hardport * 2; \
+}
+
+static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc)
+{
+ return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ));
+}
+
static inline void __iomem *mv_hc_base_from_port(void __iomem *base,
unsigned int port)
{
(mv_hardport_from_port(port) * MV_PORT_REG_SZ);
}
-static inline void __iomem *mv_ap_base(struct ata_port *ap)
+static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port)
{
- return mv_port_base(ap->host->iomap[MV_PRIMARY_BAR], ap->port_no);
+ void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port);
+ unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL;
+
+ return hc_mmio + ofs;
}
-static inline int mv_get_hc_count(unsigned long port_flags)
+static inline void __iomem *mv_host_base(struct ata_host *host)
{
- return ((port_flags & MV_FLAG_DUAL_HC) ? 2 : 1);
+ struct mv_host_priv *hpriv = host->private_data;
+ return hpriv->base;
+}
+
+static inline void __iomem *mv_ap_base(struct ata_port *ap)
+{
+ return mv_port_base(mv_host_base(ap->host), ap->port_no);
}
-static void mv_irq_clear(struct ata_port *ap)
+static inline int mv_get_hc_count(unsigned long port_flags)
{
+ return ((port_flags & MV_FLAG_DUAL_HC) ? 2 : 1);
}
static void mv_set_edma_ptrs(void __iomem *port_mmio,
/*
* initialize request queue
*/
- index = (pp->req_idx & MV_MAX_Q_DEPTH_MASK) << EDMA_REQ_Q_PTR_SHIFT;
+ pp->req_idx &= MV_MAX_Q_DEPTH_MASK; /* paranoia */
+ index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT;
WARN_ON(pp->crqb_dma & 0x3ff);
writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index,
port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
-
- if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
- writelfl((pp->crqb_dma & 0xffffffff) | index,
- port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
- else
- writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+ writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
/*
* initialize response queue
*/
- index = (pp->resp_idx & MV_MAX_Q_DEPTH_MASK) << EDMA_RSP_Q_PTR_SHIFT;
+ pp->resp_idx &= MV_MAX_Q_DEPTH_MASK; /* paranoia */
+ index = pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT;
WARN_ON(pp->crpb_dma & 0xff);
writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
-
- if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
- writelfl((pp->crpb_dma & 0xffffffff) | index,
- port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
- else
- writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
-
+ writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index,
port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
}
+static void mv_set_main_irq_mask(struct ata_host *host,
+ u32 disable_bits, u32 enable_bits)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ u32 old_mask, new_mask;
+
+ old_mask = hpriv->main_irq_mask;
+ new_mask = (old_mask & ~disable_bits) | enable_bits;
+ if (new_mask != old_mask) {
+ hpriv->main_irq_mask = new_mask;
+ writelfl(new_mask, hpriv->main_irq_mask_addr);
+ }
+}
+
+static void mv_enable_port_irqs(struct ata_port *ap,
+ unsigned int port_bits)
+{
+ unsigned int shift, hardport, port = ap->port_no;
+ u32 disable_bits, enable_bits;
+
+ MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport);
+
+ disable_bits = (DONE_IRQ | ERR_IRQ) << shift;
+ enable_bits = port_bits << shift;
+ mv_set_main_irq_mask(ap->host, disable_bits, enable_bits);
+}
+
/**
* mv_start_dma - Enable eDMA engine
* @base: port base address
* LOCKING:
* Inherited from caller.
*/
-static void mv_start_dma(void __iomem *base, struct mv_host_priv *hpriv,
- struct mv_port_priv *pp)
+static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
+ struct mv_port_priv *pp, u8 protocol)
{
+ int want_ncq = (protocol == ATA_PROT_NCQ);
+
+ if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
+ int using_ncq = ((pp->pp_flags & MV_PP_FLAG_NCQ_EN) != 0);
+ if (want_ncq != using_ncq)
+ mv_stop_edma(ap);
+ }
if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) {
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ int hardport = mv_hardport_from_port(ap->port_no);
+ void __iomem *hc_mmio = mv_hc_base_from_port(
+ mv_host_base(ap->host), hardport);
+ u32 hc_irq_cause, ipending;
+
/* clear EDMA event indicators, if any */
- writelfl(0, base + EDMA_ERR_IRQ_CAUSE_OFS);
+ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+
+ /* clear EDMA interrupt indicator, if any */
+ hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
+ ipending = (DEV_IRQ | DMA_IRQ) << hardport;
+ if (hc_irq_cause & ipending) {
+ writelfl(hc_irq_cause & ~ipending,
+ hc_mmio + HC_IRQ_CAUSE_OFS);
+ }
+
+ mv_edma_cfg(ap, want_ncq);
- mv_set_edma_ptrs(base, hpriv, pp);
+ /* clear FIS IRQ Cause */
+ if (IS_GEN_IIE(hpriv))
+ writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
- writelfl(EDMA_EN, base + EDMA_CMD_OFS);
+ mv_set_edma_ptrs(port_mmio, hpriv, pp);
+ mv_enable_port_irqs(ap, DONE_IRQ|ERR_IRQ);
+
+ writelfl(EDMA_EN, port_mmio + EDMA_CMD_OFS);
pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
}
- WARN_ON(!(EDMA_EN & readl(base + EDMA_CMD_OFS)));
+}
+
+static void mv_wait_for_edma_empty_idle(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ const u32 empty_idle = (EDMA_STATUS_CACHE_EMPTY | EDMA_STATUS_IDLE);
+ const int per_loop = 5, timeout = (15 * 1000 / per_loop);
+ int i;
+
+ /*
+ * Wait for the EDMA engine to finish transactions in progress.
+ * No idea what a good "timeout" value might be, but measurements
+ * indicate that it often requires hundreds of microseconds
+ * with two drives in-use. So we use the 15msec value above
+ * as a rough guess at what even more drives might require.
+ */
+ for (i = 0; i < timeout; ++i) {
+ u32 edma_stat = readl(port_mmio + EDMA_STATUS_OFS);
+ if ((edma_stat & empty_idle) == empty_idle)
+ break;
+ udelay(per_loop);
+ }
+ /* ata_port_printk(ap, KERN_INFO, "%s: %u+ usecs\n", __func__, i); */
}
/**
- * __mv_stop_dma - Disable eDMA engine
- * @ap: ATA channel to manipulate
- *
- * Verify the local cache of the eDMA state is accurate with a
- * WARN_ON.
+ * mv_stop_edma_engine - Disable eDMA engine
+ * @port_mmio: io base address
*
* LOCKING:
* Inherited from caller.
*/
-static int __mv_stop_dma(struct ata_port *ap)
+static int mv_stop_edma_engine(void __iomem *port_mmio)
{
- void __iomem *port_mmio = mv_ap_base(ap);
- struct mv_port_priv *pp = ap->private_data;
- u32 reg;
- int i, err = 0;
+ int i;
- if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
- /* Disable EDMA if active. The disable bit auto clears.
- */
- writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
- pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
- } else {
- WARN_ON(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS));
- }
+ /* Disable eDMA. The disable bit auto clears. */
+ writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
- /* now properly wait for the eDMA to stop */
- for (i = 1000; i > 0; i--) {
- reg = readl(port_mmio + EDMA_CMD_OFS);
+ /* Wait for the chip to confirm eDMA is off. */
+ for (i = 10000; i > 0; i--) {
+ u32 reg = readl(port_mmio + EDMA_CMD_OFS);
if (!(reg & EDMA_EN))
- break;
-
- udelay(100);
- }
-
- if (reg & EDMA_EN) {
- ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n");
- err = -EIO;
+ return 0;
+ udelay(10);
}
-
- return err;
+ return -EIO;
}
-static int mv_stop_dma(struct ata_port *ap)
+static int mv_stop_edma(struct ata_port *ap)
{
- unsigned long flags;
- int rc;
-
- spin_lock_irqsave(&ap->host->lock, flags);
- rc = __mv_stop_dma(ap);
- spin_unlock_irqrestore(&ap->host->lock, flags);
+ void __iomem *port_mmio = mv_ap_base(ap);
+ struct mv_port_priv *pp = ap->private_data;
- return rc;
+ if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN))
+ return 0;
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ mv_wait_for_edma_empty_idle(ap);
+ if (mv_stop_edma_engine(port_mmio)) {
+ ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n");
+ return -EIO;
+ }
+ return 0;
}
#ifdef ATA_DEBUG
return ofs;
}
-static int mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val)
+static int mv_scr_read(struct ata_link *link, unsigned int sc_reg_in, u32 *val)
{
unsigned int ofs = mv_scr_offset(sc_reg_in);
if (ofs != 0xffffffffU) {
- *val = readl(mv_ap_base(ap) + ofs);
+ *val = readl(mv_ap_base(link->ap) + ofs);
return 0;
} else
return -EINVAL;
}
-static int mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
+static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
{
unsigned int ofs = mv_scr_offset(sc_reg_in);
if (ofs != 0xffffffffU) {
- writelfl(val, mv_ap_base(ap) + ofs);
+ writelfl(val, mv_ap_base(link->ap) + ofs);
return 0;
} else
return -EINVAL;
}
-static void mv_edma_cfg(struct ata_port *ap, struct mv_host_priv *hpriv,
- void __iomem *port_mmio)
+static void mv6_dev_config(struct ata_device *adev)
{
- u32 cfg = readl(port_mmio + EDMA_CFG_OFS);
+ /*
+ * Deal with Gen-II ("mv6") hardware quirks/restrictions:
+ *
+ * Gen-II does not support NCQ over a port multiplier
+ * (no FIS-based switching).
+ *
+ * We don't have hob_nsect when doing NCQ commands on Gen-II.
+ * See mv_qc_prep() for more info.
+ */
+ if (adev->flags & ATA_DFLAG_NCQ) {
+ if (sata_pmp_attached(adev->link->ap)) {
+ adev->flags &= ~ATA_DFLAG_NCQ;
+ ata_dev_printk(adev, KERN_INFO,
+ "NCQ disabled for command-based switching\n");
+ } else if (adev->max_sectors > GEN_II_NCQ_MAX_SECTORS) {
+ adev->max_sectors = GEN_II_NCQ_MAX_SECTORS;
+ ata_dev_printk(adev, KERN_INFO,
+ "max_sectors limited to %u for NCQ\n",
+ adev->max_sectors);
+ }
+ }
+}
- /* set up non-NCQ EDMA configuration */
- cfg &= ~(1 << 9); /* disable eQue */
+static int mv_qc_defer(struct ata_queued_cmd *qc)
+{
+ struct ata_link *link = qc->dev->link;
+ struct ata_port *ap = link->ap;
+ struct mv_port_priv *pp = ap->private_data;
- if (IS_GEN_I(hpriv)) {
- cfg &= ~0x1f; /* clear queue depth */
- cfg |= (1 << 8); /* enab config burst size mask */
- }
+ /*
+ * Don't allow new commands if we're in a delayed EH state
+ * for NCQ and/or FIS-based switching.
+ */
+ if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH)
+ return ATA_DEFER_PORT;
+ /*
+ * If the port is completely idle, then allow the new qc.
+ */
+ if (ap->nr_active_links == 0)
+ return 0;
- else if (IS_GEN_II(hpriv)) {
- cfg &= ~0x1f; /* clear queue depth */
- cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN;
- cfg &= ~(EDMA_CFG_NCQ | EDMA_CFG_NCQ_GO_ON_ERR); /* clear NCQ */
- }
+ /*
+ * The port is operating in host queuing mode (EDMA) with NCQ
+ * enabled, allow multiple NCQ commands. EDMA also allows
+ * queueing multiple DMA commands but libata core currently
+ * doesn't allow it.
+ */
+ if ((pp->pp_flags & MV_PP_FLAG_EDMA_EN) &&
+ (pp->pp_flags & MV_PP_FLAG_NCQ_EN) && ata_is_ncq(qc->tf.protocol))
+ return 0;
- else if (IS_GEN_IIE(hpriv)) {
- cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */
- cfg |= (1 << 22); /* enab 4-entry host queue cache */
- cfg &= ~(1 << 19); /* dis 128-entry queue (for now?) */
- cfg |= (1 << 18); /* enab early completion */
- cfg |= (1 << 17); /* enab cut-through (dis stor&forwrd) */
- cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */
- cfg &= ~(EDMA_CFG_NCQ); /* clear NCQ */
+ return ATA_DEFER_PORT;
+}
+
+static void mv_config_fbs(void __iomem *port_mmio, int want_ncq, int want_fbs)
+{
+ u32 new_fiscfg, old_fiscfg;
+ u32 new_ltmode, old_ltmode;
+ u32 new_haltcond, old_haltcond;
+
+ old_fiscfg = readl(port_mmio + FISCFG_OFS);
+ old_ltmode = readl(port_mmio + LTMODE_OFS);
+ old_haltcond = readl(port_mmio + EDMA_HALTCOND_OFS);
+
+ new_fiscfg = old_fiscfg & ~(FISCFG_SINGLE_SYNC | FISCFG_WAIT_DEV_ERR);
+ new_ltmode = old_ltmode & ~LTMODE_BIT8;
+ new_haltcond = old_haltcond | EDMA_ERR_DEV;
+
+ if (want_fbs) {
+ new_fiscfg = old_fiscfg | FISCFG_SINGLE_SYNC;
+ new_ltmode = old_ltmode | LTMODE_BIT8;
+ if (want_ncq)
+ new_haltcond &= ~EDMA_ERR_DEV;
+ else
+ new_fiscfg |= FISCFG_WAIT_DEV_ERR;
}
- writelfl(cfg, port_mmio + EDMA_CFG_OFS);
+ if (new_fiscfg != old_fiscfg)
+ writelfl(new_fiscfg, port_mmio + FISCFG_OFS);
+ if (new_ltmode != old_ltmode)
+ writelfl(new_ltmode, port_mmio + LTMODE_OFS);
+ if (new_haltcond != old_haltcond)
+ writelfl(new_haltcond, port_mmio + EDMA_HALTCOND_OFS);
}
-/**
- * mv_port_start - Port specific init/start routine.
- * @ap: ATA channel to manipulate
- *
- * Allocate and point to DMA memory, init port private memory,
- * zero indices.
+static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq)
+{
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ u32 old, new;
+
+ /* workaround for 88SX60x1 FEr SATA#25 (part 1) */
+ old = readl(hpriv->base + MV_GPIO_PORT_CTL_OFS);
+ if (want_ncq)
+ new = old | (1 << 22);
+ else
+ new = old & ~(1 << 22);
+ if (new != old)
+ writel(new, hpriv->base + MV_GPIO_PORT_CTL_OFS);
+}
+
+static void mv_edma_cfg(struct ata_port *ap, int want_ncq)
+{
+ u32 cfg;
+ struct mv_port_priv *pp = ap->private_data;
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = mv_ap_base(ap);
+
+ /* set up non-NCQ EDMA configuration */
+ cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */
+ pp->pp_flags &= ~MV_PP_FLAG_FBS_EN;
+
+ if (IS_GEN_I(hpriv))
+ cfg |= (1 << 8); /* enab config burst size mask */
+
+ else if (IS_GEN_II(hpriv)) {
+ cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN;
+ mv_60x1_errata_sata25(ap, want_ncq);
+
+ } else if (IS_GEN_IIE(hpriv)) {
+ int want_fbs = sata_pmp_attached(ap);
+ /*
+ * Possible future enhancement:
+ *
+ * The chip can use FBS with non-NCQ, if we allow it,
+ * But first we need to have the error handling in place
+ * for this mode (datasheet section 7.3.15.4.2.3).
+ * So disallow non-NCQ FBS for now.
+ */
+ want_fbs &= want_ncq;
+
+ mv_config_fbs(port_mmio, want_ncq, want_fbs);
+
+ if (want_fbs) {
+ pp->pp_flags |= MV_PP_FLAG_FBS_EN;
+ cfg |= EDMA_CFG_EDMA_FBS; /* FIS-based switching */
+ }
+
+ cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */
+ cfg |= (1 << 22); /* enab 4-entry host queue cache */
+ if (!IS_SOC(hpriv))
+ cfg |= (1 << 18); /* enab early completion */
+ if (hpriv->hp_flags & MV_HP_CUT_THROUGH)
+ cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */
+ }
+
+ if (want_ncq) {
+ cfg |= EDMA_CFG_NCQ;
+ pp->pp_flags |= MV_PP_FLAG_NCQ_EN;
+ } else
+ pp->pp_flags &= ~MV_PP_FLAG_NCQ_EN;
+
+ writelfl(cfg, port_mmio + EDMA_CFG_OFS);
+}
+
+static void mv_port_free_dma_mem(struct ata_port *ap)
+{
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ struct mv_port_priv *pp = ap->private_data;
+ int tag;
+
+ if (pp->crqb) {
+ dma_pool_free(hpriv->crqb_pool, pp->crqb, pp->crqb_dma);
+ pp->crqb = NULL;
+ }
+ if (pp->crpb) {
+ dma_pool_free(hpriv->crpb_pool, pp->crpb, pp->crpb_dma);
+ pp->crpb = NULL;
+ }
+ /*
+ * For GEN_I, there's no NCQ, so we have only a single sg_tbl.
+ * For later hardware, we have one unique sg_tbl per NCQ tag.
+ */
+ for (tag = 0; tag < MV_MAX_Q_DEPTH; ++tag) {
+ if (pp->sg_tbl[tag]) {
+ if (tag == 0 || !IS_GEN_I(hpriv))
+ dma_pool_free(hpriv->sg_tbl_pool,
+ pp->sg_tbl[tag],
+ pp->sg_tbl_dma[tag]);
+ pp->sg_tbl[tag] = NULL;
+ }
+ }
+}
+
+/**
+ * mv_port_start - Port specific init/start routine.
+ * @ap: ATA channel to manipulate
+ *
+ * Allocate and point to DMA memory, init port private memory,
+ * zero indices.
*
* LOCKING:
* Inherited from caller.
struct device *dev = ap->host->dev;
struct mv_host_priv *hpriv = ap->host->private_data;
struct mv_port_priv *pp;
- void __iomem *port_mmio = mv_ap_base(ap);
- void *mem;
- dma_addr_t mem_dma;
- unsigned long flags;
- int rc;
+ int tag;
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
return -ENOMEM;
+ ap->private_data = pp;
- mem = dmam_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma,
- GFP_KERNEL);
- if (!mem)
+ pp->crqb = dma_pool_alloc(hpriv->crqb_pool, GFP_KERNEL, &pp->crqb_dma);
+ if (!pp->crqb)
return -ENOMEM;
- memset(mem, 0, MV_PORT_PRIV_DMA_SZ);
-
- rc = ata_pad_alloc(ap, dev);
- if (rc)
- return rc;
-
- /* First item in chunk of DMA memory:
- * 32-slot command request table (CRQB), 32 bytes each in size
- */
- pp->crqb = mem;
- pp->crqb_dma = mem_dma;
- mem += MV_CRQB_Q_SZ;
- mem_dma += MV_CRQB_Q_SZ;
-
- /* Second item:
- * 32-slot command response table (CRPB), 8 bytes each in size
- */
- pp->crpb = mem;
- pp->crpb_dma = mem_dma;
- mem += MV_CRPB_Q_SZ;
- mem_dma += MV_CRPB_Q_SZ;
-
- /* Third item:
- * Table of scatter-gather descriptors (ePRD), 16 bytes each
- */
- pp->sg_tbl = mem;
- pp->sg_tbl_dma = mem_dma;
-
- spin_lock_irqsave(&ap->host->lock, flags);
-
- mv_edma_cfg(ap, hpriv, port_mmio);
+ memset(pp->crqb, 0, MV_CRQB_Q_SZ);
- mv_set_edma_ptrs(port_mmio, hpriv, pp);
+ pp->crpb = dma_pool_alloc(hpriv->crpb_pool, GFP_KERNEL, &pp->crpb_dma);
+ if (!pp->crpb)
+ goto out_port_free_dma_mem;
+ memset(pp->crpb, 0, MV_CRPB_Q_SZ);
- spin_unlock_irqrestore(&ap->host->lock, flags);
-
- /* Don't turn on EDMA here...do it before DMA commands only. Else
- * we'll be unable to send non-data, PIO, etc due to restricted access
- * to shadow regs.
+ /* 6041/6081 Rev. "C0" (and newer) are okay with async notify */
+ if (hpriv->hp_flags & MV_HP_ERRATA_60X1C0)
+ ap->flags |= ATA_FLAG_AN;
+ /*
+ * For GEN_I, there's no NCQ, so we only allocate a single sg_tbl.
+ * For later hardware, we need one unique sg_tbl per NCQ tag.
*/
- ap->private_data = pp;
+ for (tag = 0; tag < MV_MAX_Q_DEPTH; ++tag) {
+ if (tag == 0 || !IS_GEN_I(hpriv)) {
+ pp->sg_tbl[tag] = dma_pool_alloc(hpriv->sg_tbl_pool,
+ GFP_KERNEL, &pp->sg_tbl_dma[tag]);
+ if (!pp->sg_tbl[tag])
+ goto out_port_free_dma_mem;
+ } else {
+ pp->sg_tbl[tag] = pp->sg_tbl[0];
+ pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0];
+ }
+ }
return 0;
+
+out_port_free_dma_mem:
+ mv_port_free_dma_mem(ap);
+ return -ENOMEM;
}
/**
*/
static void mv_port_stop(struct ata_port *ap)
{
- mv_stop_dma(ap);
+ mv_stop_edma(ap);
+ mv_enable_port_irqs(ap, 0);
+ mv_port_free_dma_mem(ap);
}
/**
struct mv_port_priv *pp = qc->ap->private_data;
struct scatterlist *sg;
struct mv_sg *mv_sg, *last_sg = NULL;
+ unsigned int si;
- mv_sg = pp->sg_tbl;
- ata_for_each_sg(sg, qc) {
+ mv_sg = pp->sg_tbl[qc->tag];
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
dma_addr_t addr = sg_dma_address(sg);
u32 sg_len = sg_dma_len(sg);
u16 flags = 0;
unsigned in_index;
- if (qc->tf.protocol != ATA_PROT_DMA)
+ if ((qc->tf.protocol != ATA_PROT_DMA) &&
+ (qc->tf.protocol != ATA_PROT_NCQ))
return;
/* Fill in command request block
flags |= CRQB_FLAG_READ;
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
- flags |= qc->tag << CRQB_IOID_SHIFT; /* 50xx appears to ignore this*/
+ flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT;
/* get current queue index from software */
- in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
+ in_index = pp->req_idx;
pp->crqb[in_index].sg_addr =
- cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
+ cpu_to_le32(pp->sg_tbl_dma[qc->tag] & 0xffffffff);
pp->crqb[in_index].sg_addr_hi =
- cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
+ cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16);
pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags);
cw = &pp->crqb[in_index].ata_cmd[0];
case ATA_CMD_WRITE_FUA_EXT:
mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0);
break;
-#ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */
case ATA_CMD_FPDMA_READ:
case ATA_CMD_FPDMA_WRITE:
mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0);
mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0);
break;
-#endif /* FIXME: remove this line when NCQ added */
default:
/* The only other commands EDMA supports in non-queued and
* non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none
unsigned in_index;
u32 flags = 0;
- if (qc->tf.protocol != ATA_PROT_DMA)
+ if ((qc->tf.protocol != ATA_PROT_DMA) &&
+ (qc->tf.protocol != ATA_PROT_NCQ))
return;
- /* Fill in Gen IIE command request block
- */
+ /* Fill in Gen IIE command request block */
if (!(qc->tf.flags & ATA_TFLAG_WRITE))
flags |= CRQB_FLAG_READ;
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
- flags |= qc->tag << CRQB_IOID_SHIFT; /* "I/O Id" is -really-
- what we use as our tag */
+ flags |= qc->tag << CRQB_HOSTQ_SHIFT;
+ flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT;
/* get current queue index from software */
- in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
+ in_index = pp->req_idx;
crqb = (struct mv_crqb_iie *) &pp->crqb[in_index];
- crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
- crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
+ crqb->addr = cpu_to_le32(pp->sg_tbl_dma[qc->tag] & 0xffffffff);
+ crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16);
crqb->flags = cpu_to_le32(flags);
tf = &qc->tf;
struct ata_port *ap = qc->ap;
void __iomem *port_mmio = mv_ap_base(ap);
struct mv_port_priv *pp = ap->private_data;
- struct mv_host_priv *hpriv = ap->host->private_data;
u32 in_index;
- if (qc->tf.protocol != ATA_PROT_DMA) {
- /* We're about to send a non-EDMA capable command to the
+ if ((qc->tf.protocol != ATA_PROT_DMA) &&
+ (qc->tf.protocol != ATA_PROT_NCQ)) {
+ static int limit_warnings = 10;
+ /*
+ * Errata SATA#16, SATA#24: warn if multiple DRQs expected.
+ *
+ * Someday, we might implement special polling workarounds
+ * for these, but it all seems rather unnecessary since we
+ * normally use only DMA for commands which transfer more
+ * than a single block of data.
+ *
+ * Much of the time, this could just work regardless.
+ * So for now, just log the incident, and allow the attempt.
+ */
+ if (limit_warnings > 0 && (qc->nbytes / qc->sect_size) > 1) {
+ --limit_warnings;
+ ata_link_printk(qc->dev->link, KERN_WARNING, DRV_NAME
+ ": attempting PIO w/multiple DRQ: "
+ "this may fail due to h/w errata\n");
+ }
+ /*
+ * We're about to send a non-EDMA capable command to the
* port. Turn off EDMA so there won't be problems accessing
* shadow block, etc registers.
*/
- __mv_stop_dma(ap);
- return ata_qc_issue_prot(qc);
+ mv_stop_edma(ap);
+ mv_enable_port_irqs(ap, ERR_IRQ);
+ mv_pmp_select(ap, qc->dev->link->pmp);
+ return ata_sff_qc_issue(qc);
}
- mv_start_dma(port_mmio, hpriv, pp);
-
- in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
-
- /* until we do queuing, the queue should be empty at this point */
- WARN_ON(in_index != ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS)
- >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
-
- pp->req_idx++;
+ mv_start_dma(ap, port_mmio, pp, qc->tf.protocol);
- in_index = (pp->req_idx & MV_MAX_Q_DEPTH_MASK) << EDMA_REQ_Q_PTR_SHIFT;
+ pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK;
+ in_index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT;
/* and write the request in pointer to kick the EDMA to life */
writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index,
return 0;
}
+static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap)
+{
+ struct mv_port_priv *pp = ap->private_data;
+ struct ata_queued_cmd *qc;
+
+ if (pp->pp_flags & MV_PP_FLAG_NCQ_EN)
+ return NULL;
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && (qc->tf.flags & ATA_TFLAG_POLLING))
+ qc = NULL;
+ return qc;
+}
+
+static void mv_pmp_error_handler(struct ata_port *ap)
+{
+ unsigned int pmp, pmp_map;
+ struct mv_port_priv *pp = ap->private_data;
+
+ if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH) {
+ /*
+ * Perform NCQ error analysis on failed PMPs
+ * before we freeze the port entirely.
+ *
+ * The failed PMPs are marked earlier by mv_pmp_eh_prep().
+ */
+ pmp_map = pp->delayed_eh_pmp_map;
+ pp->pp_flags &= ~MV_PP_FLAG_DELAYED_EH;
+ for (pmp = 0; pmp_map != 0; pmp++) {
+ unsigned int this_pmp = (1 << pmp);
+ if (pmp_map & this_pmp) {
+ struct ata_link *link = &ap->pmp_link[pmp];
+ pmp_map &= ~this_pmp;
+ ata_eh_analyze_ncq_error(link);
+ }
+ }
+ ata_port_freeze(ap);
+ }
+ sata_pmp_error_handler(ap);
+}
+
+static unsigned int mv_get_err_pmp_map(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+
+ return readl(port_mmio + SATA_TESTCTL_OFS) >> 16;
+}
+
+static void mv_pmp_eh_prep(struct ata_port *ap, unsigned int pmp_map)
+{
+ struct ata_eh_info *ehi;
+ unsigned int pmp;
+
+ /*
+ * Initialize EH info for PMPs which saw device errors
+ */
+ ehi = &ap->link.eh_info;
+ for (pmp = 0; pmp_map != 0; pmp++) {
+ unsigned int this_pmp = (1 << pmp);
+ if (pmp_map & this_pmp) {
+ struct ata_link *link = &ap->pmp_link[pmp];
+
+ pmp_map &= ~this_pmp;
+ ehi = &link->eh_info;
+ ata_ehi_clear_desc(ehi);
+ ata_ehi_push_desc(ehi, "dev err");
+ ehi->err_mask |= AC_ERR_DEV;
+ ehi->action |= ATA_EH_RESET;
+ ata_link_abort(link);
+ }
+ }
+}
+
+static int mv_req_q_empty(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ u32 in_ptr, out_ptr;
+
+ in_ptr = (readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS)
+ >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+ out_ptr = (readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS)
+ >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+ return (in_ptr == out_ptr); /* 1 == queue_is_empty */
+}
+
+static int mv_handle_fbs_ncq_dev_err(struct ata_port *ap)
+{
+ struct mv_port_priv *pp = ap->private_data;
+ int failed_links;
+ unsigned int old_map, new_map;
+
+ /*
+ * Device error during FBS+NCQ operation:
+ *
+ * Set a port flag to prevent further I/O being enqueued.
+ * Leave the EDMA running to drain outstanding commands from this port.
+ * Perform the post-mortem/EH only when all responses are complete.
+ * Follow recovery sequence from 6042/7042 datasheet (7.3.15.4.2.2).
+ */
+ if (!(pp->pp_flags & MV_PP_FLAG_DELAYED_EH)) {
+ pp->pp_flags |= MV_PP_FLAG_DELAYED_EH;
+ pp->delayed_eh_pmp_map = 0;
+ }
+ old_map = pp->delayed_eh_pmp_map;
+ new_map = old_map | mv_get_err_pmp_map(ap);
+
+ if (old_map != new_map) {
+ pp->delayed_eh_pmp_map = new_map;
+ mv_pmp_eh_prep(ap, new_map & ~old_map);
+ }
+ failed_links = hweight16(new_map);
+
+ ata_port_printk(ap, KERN_INFO, "%s: pmp_map=%04x qc_map=%04x "
+ "failed_links=%d nr_active_links=%d\n",
+ __func__, pp->delayed_eh_pmp_map,
+ ap->qc_active, failed_links,
+ ap->nr_active_links);
+
+ if (ap->nr_active_links <= failed_links && mv_req_q_empty(ap)) {
+ mv_process_crpb_entries(ap, pp);
+ mv_stop_edma(ap);
+ mv_eh_freeze(ap);
+ ata_port_printk(ap, KERN_INFO, "%s: done\n", __func__);
+ return 1; /* handled */
+ }
+ ata_port_printk(ap, KERN_INFO, "%s: waiting\n", __func__);
+ return 1; /* handled */
+}
+
+static int mv_handle_fbs_non_ncq_dev_err(struct ata_port *ap)
+{
+ /*
+ * Possible future enhancement:
+ *
+ * FBS+non-NCQ operation is not yet implemented.
+ * See related notes in mv_edma_cfg().
+ *
+ * Device error during FBS+non-NCQ operation:
+ *
+ * We need to snapshot the shadow registers for each failed command.
+ * Follow recovery sequence from 6042/7042 datasheet (7.3.15.4.2.3).
+ */
+ return 0; /* not handled */
+}
+
+static int mv_handle_dev_err(struct ata_port *ap, u32 edma_err_cause)
+{
+ struct mv_port_priv *pp = ap->private_data;
+
+ if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN))
+ return 0; /* EDMA was not active: not handled */
+ if (!(pp->pp_flags & MV_PP_FLAG_FBS_EN))
+ return 0; /* FBS was not active: not handled */
+
+ if (!(edma_err_cause & EDMA_ERR_DEV))
+ return 0; /* non DEV error: not handled */
+ edma_err_cause &= ~EDMA_ERR_IRQ_TRANSIENT;
+ if (edma_err_cause & ~(EDMA_ERR_DEV | EDMA_ERR_SELF_DIS))
+ return 0; /* other problems: not handled */
+
+ if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) {
+ /*
+ * EDMA should NOT have self-disabled for this case.
+ * If it did, then something is wrong elsewhere,
+ * and we cannot handle it here.
+ */
+ if (edma_err_cause & EDMA_ERR_SELF_DIS) {
+ ata_port_printk(ap, KERN_WARNING,
+ "%s: err_cause=0x%x pp_flags=0x%x\n",
+ __func__, edma_err_cause, pp->pp_flags);
+ return 0; /* not handled */
+ }
+ return mv_handle_fbs_ncq_dev_err(ap);
+ } else {
+ /*
+ * EDMA should have self-disabled for this case.
+ * If it did not, then something is wrong elsewhere,
+ * and we cannot handle it here.
+ */
+ if (!(edma_err_cause & EDMA_ERR_SELF_DIS)) {
+ ata_port_printk(ap, KERN_WARNING,
+ "%s: err_cause=0x%x pp_flags=0x%x\n",
+ __func__, edma_err_cause, pp->pp_flags);
+ return 0; /* not handled */
+ }
+ return mv_handle_fbs_non_ncq_dev_err(ap);
+ }
+ return 0; /* not handled */
+}
+
+static void mv_unexpected_intr(struct ata_port *ap, int edma_was_enabled)
+{
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ char *when = "idle";
+
+ ata_ehi_clear_desc(ehi);
+ if (!ap || (ap->flags & ATA_FLAG_DISABLED)) {
+ when = "disabled";
+ } else if (edma_was_enabled) {
+ when = "EDMA enabled";
+ } else {
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && (qc->tf.flags & ATA_TFLAG_POLLING))
+ when = "polling";
+ }
+ ata_ehi_push_desc(ehi, "unexpected device interrupt while %s", when);
+ ehi->err_mask |= AC_ERR_OTHER;
+ ehi->action |= ATA_EH_RESET;
+ ata_port_freeze(ap);
+}
+
/**
* mv_err_intr - Handle error interrupts on the port
* @ap: ATA channel to manipulate
- * @reset_allowed: bool: 0 == don't trigger from reset here
+ * @qc: affected command (non-NCQ), or NULL
*
- * In most cases, just clear the interrupt and move on. However,
- * some cases require an eDMA reset, which is done right before
- * the COMRESET in mv_phy_reset(). The SERR case requires a
- * clear of pending errors in the SATA SERROR register. Finally,
- * if the port disabled DMA, update our cached copy to match.
+ * Most cases require a full reset of the chip's state machine,
+ * which also performs a COMRESET.
+ * Also, if the port disabled DMA, update our cached copy to match.
*
* LOCKING:
* Inherited from caller.
*/
-static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
+static void mv_err_intr(struct ata_port *ap)
{
void __iomem *port_mmio = mv_ap_base(ap);
u32 edma_err_cause, eh_freeze_mask, serr = 0;
+ u32 fis_cause = 0;
struct mv_port_priv *pp = ap->private_data;
struct mv_host_priv *hpriv = ap->host->private_data;
- unsigned int edma_enabled = (pp->pp_flags & MV_PP_FLAG_EDMA_EN);
unsigned int action = 0, err_mask = 0;
struct ata_eh_info *ehi = &ap->link.eh_info;
+ struct ata_queued_cmd *qc;
+ int abort = 0;
- ata_ehi_clear_desc(ehi);
-
- if (!edma_enabled) {
- /* just a guess: do we need to do this? should we
- * expand this, and do it in all cases?
- */
- sata_scr_read(&ap->link, SCR_ERROR, &serr);
- sata_scr_write_flush(&ap->link, SCR_ERROR, serr);
- }
+ /*
+ * Read and clear the SError and err_cause bits.
+ * For GenIIe, if EDMA_ERR_TRANS_IRQ_7 is set, we also must read/clear
+ * the FIS_IRQ_CAUSE register before clearing edma_err_cause.
+ */
+ sata_scr_read(&ap->link, SCR_ERROR, &serr);
+ sata_scr_write_flush(&ap->link, SCR_ERROR, serr);
edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+ if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) {
+ fis_cause = readl(port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
+ writelfl(~fis_cause, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
+ }
+ writelfl(~edma_err_cause, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
- ata_ehi_push_desc(ehi, "edma_err 0x%08x", edma_err_cause);
+ if (edma_err_cause & EDMA_ERR_DEV) {
+ /*
+ * Device errors during FIS-based switching operation
+ * require special handling.
+ */
+ if (mv_handle_dev_err(ap, edma_err_cause))
+ return;
+ }
+ qc = mv_get_active_qc(ap);
+ ata_ehi_clear_desc(ehi);
+ ata_ehi_push_desc(ehi, "edma_err_cause=%08x pp_flags=%08x",
+ edma_err_cause, pp->pp_flags);
+
+ if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) {
+ ata_ehi_push_desc(ehi, "fis_cause=%08x", fis_cause);
+ if (fis_cause & SATA_FIS_IRQ_AN) {
+ u32 ec = edma_err_cause &
+ ~(EDMA_ERR_TRANS_IRQ_7 | EDMA_ERR_IRQ_TRANSIENT);
+ sata_async_notification(ap);
+ if (!ec)
+ return; /* Just an AN; no need for the nukes */
+ ata_ehi_push_desc(ehi, "SDB notify");
+ }
+ }
/*
- * all generations share these EDMA error cause bits
+ * All generations share these EDMA error cause bits:
*/
-
- if (edma_err_cause & EDMA_ERR_DEV)
+ if (edma_err_cause & EDMA_ERR_DEV) {
err_mask |= AC_ERR_DEV;
+ action |= ATA_EH_RESET;
+ ata_ehi_push_desc(ehi, "dev error");
+ }
if (edma_err_cause & (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR |
EDMA_ERR_CRQB_PAR | EDMA_ERR_CRPB_PAR |
EDMA_ERR_INTRL_PAR)) {
err_mask |= AC_ERR_ATA_BUS;
- action |= ATA_EH_HARDRESET;
+ action |= ATA_EH_RESET;
ata_ehi_push_desc(ehi, "parity error");
}
if (edma_err_cause & (EDMA_ERR_DEV_DCON | EDMA_ERR_DEV_CON)) {
ata_ehi_hotplugged(ehi);
ata_ehi_push_desc(ehi, edma_err_cause & EDMA_ERR_DEV_DCON ?
"dev disconnect" : "dev connect");
+ action |= ATA_EH_RESET;
}
+ /*
+ * Gen-I has a different SELF_DIS bit,
+ * different FREEZE bits, and no SERR bit:
+ */
if (IS_GEN_I(hpriv)) {
eh_freeze_mask = EDMA_EH_FREEZE_5;
-
if (edma_err_cause & EDMA_ERR_SELF_DIS_5) {
- struct mv_port_priv *pp = ap->private_data;
pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
ata_ehi_push_desc(ehi, "EDMA self-disable");
}
} else {
eh_freeze_mask = EDMA_EH_FREEZE;
-
if (edma_err_cause & EDMA_ERR_SELF_DIS) {
- struct mv_port_priv *pp = ap->private_data;
pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
ata_ehi_push_desc(ehi, "EDMA self-disable");
}
-
if (edma_err_cause & EDMA_ERR_SERR) {
- sata_scr_read(&ap->link, SCR_ERROR, &serr);
- sata_scr_write_flush(&ap->link, SCR_ERROR, serr);
- err_mask = AC_ERR_ATA_BUS;
- action |= ATA_EH_HARDRESET;
+ ata_ehi_push_desc(ehi, "SError=%08x", serr);
+ err_mask |= AC_ERR_ATA_BUS;
+ action |= ATA_EH_RESET;
}
}
- /* Clear EDMA now that SERR cleanup done */
- writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
-
if (!err_mask) {
err_mask = AC_ERR_OTHER;
- action |= ATA_EH_HARDRESET;
+ action |= ATA_EH_RESET;
}
ehi->serror |= serr;
else
ehi->err_mask |= err_mask;
- if (edma_err_cause & eh_freeze_mask)
+ if (err_mask == AC_ERR_DEV) {
+ /*
+ * Cannot do ata_port_freeze() here,
+ * because it would kill PIO access,
+ * which is needed for further diagnosis.
+ */
+ mv_eh_freeze(ap);
+ abort = 1;
+ } else if (edma_err_cause & eh_freeze_mask) {
+ /*
+ * Note to self: ata_port_freeze() calls ata_port_abort()
+ */
ata_port_freeze(ap);
- else
- ata_port_abort(ap);
+ } else {
+ abort = 1;
+ }
+
+ if (abort) {
+ if (qc)
+ ata_link_abort(qc->dev->link);
+ else
+ ata_port_abort(ap);
+ }
}
-static void mv_intr_pio(struct ata_port *ap)
+static void mv_process_crpb_response(struct ata_port *ap,
+ struct mv_crpb *response, unsigned int tag, int ncq_enabled)
{
- struct ata_queued_cmd *qc;
- u8 ata_status;
-
- /* ignore spurious intr if drive still BUSY */
- ata_status = readb(ap->ioaddr.status_addr);
- if (unlikely(ata_status & ATA_BUSY))
- return;
-
- /* get active ATA command */
- qc = ata_qc_from_tag(ap, ap->link.active_tag);
- if (unlikely(!qc)) /* no active tag */
- return;
- if (qc->tf.flags & ATA_TFLAG_POLLING) /* polling; we don't own qc */
- return;
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag);
- /* and finally, complete the ATA command */
- qc->err_mask |= ac_err_mask(ata_status);
- ata_qc_complete(qc);
+ if (qc) {
+ u8 ata_status;
+ u16 edma_status = le16_to_cpu(response->flags);
+ /*
+ * edma_status from a response queue entry:
+ * LSB is from EDMA_ERR_IRQ_CAUSE_OFS (non-NCQ only).
+ * MSB is saved ATA status from command completion.
+ */
+ if (!ncq_enabled) {
+ u8 err_cause = edma_status & 0xff & ~EDMA_ERR_DEV;
+ if (err_cause) {
+ /*
+ * Error will be seen/handled by mv_err_intr().
+ * So do nothing at all here.
+ */
+ return;
+ }
+ }
+ ata_status = edma_status >> CRPB_FLAG_STATUS_SHIFT;
+ if (!ac_err_mask(ata_status))
+ ata_qc_complete(qc);
+ /* else: leave it for mv_err_intr() */
+ } else {
+ ata_port_printk(ap, KERN_ERR, "%s: no qc for tag=%d\n",
+ __func__, tag);
+ }
}
-static void mv_intr_edma(struct ata_port *ap)
+static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp)
{
void __iomem *port_mmio = mv_ap_base(ap);
struct mv_host_priv *hpriv = ap->host->private_data;
- struct mv_port_priv *pp = ap->private_data;
- struct ata_queued_cmd *qc;
- u32 out_index, in_index;
+ u32 in_index;
bool work_done = false;
+ int ncq_enabled = (pp->pp_flags & MV_PP_FLAG_NCQ_EN);
- /* get h/w response queue pointer */
+ /* Get the hardware queue position index */
in_index = (readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
>> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
- while (1) {
- u16 status;
+ /* Process new responses from since the last time we looked */
+ while (in_index != pp->resp_idx) {
unsigned int tag;
+ struct mv_crpb *response = &pp->crpb[pp->resp_idx];
- /* get s/w response queue last-read pointer, and compare */
- out_index = pp->resp_idx & MV_MAX_Q_DEPTH_MASK;
- if (in_index == out_index)
- break;
+ pp->resp_idx = (pp->resp_idx + 1) & MV_MAX_Q_DEPTH_MASK;
- /* 50xx: get active ATA command */
- if (IS_GEN_I(hpriv))
+ if (IS_GEN_I(hpriv)) {
+ /* 50xx: no NCQ, only one command active at a time */
tag = ap->link.active_tag;
-
- /* Gen II/IIE: get active ATA command via tag, to enable
- * support for queueing. this works transparently for
- * queued and non-queued modes.
- */
- else if (IS_GEN_II(hpriv))
- tag = (le16_to_cpu(pp->crpb[out_index].id)
- >> CRPB_IOID_SHIFT_6) & 0x3f;
-
- else /* IS_GEN_IIE */
- tag = (le16_to_cpu(pp->crpb[out_index].id)
- >> CRPB_IOID_SHIFT_7) & 0x3f;
-
- qc = ata_qc_from_tag(ap, tag);
-
- /* lower 8 bits of status are EDMA_ERR_IRQ_CAUSE_OFS
- * bits (WARNING: might not necessarily be associated
- * with this command), which -should- be clear
- * if all is well
- */
- status = le16_to_cpu(pp->crpb[out_index].flags);
- if (unlikely(status & 0xff)) {
- mv_err_intr(ap, qc);
- return;
- }
-
- /* and finally, complete the ATA command */
- if (qc) {
- qc->err_mask |=
- ac_err_mask(status >> CRPB_FLAG_STATUS_SHIFT);
- ata_qc_complete(qc);
+ } else {
+ /* Gen II/IIE: get command tag from CRPB entry */
+ tag = le16_to_cpu(response->id) & 0x1f;
}
-
- /* advance software response queue pointer, to
- * indicate (after the loop completes) to hardware
- * that we have consumed a response queue entry.
- */
+ mv_process_crpb_response(ap, response, tag, ncq_enabled);
work_done = true;
- pp->resp_idx++;
}
+ /* Update the software queue position index in hardware */
if (work_done)
writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) |
- (out_index << EDMA_RSP_Q_PTR_SHIFT),
+ (pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT),
port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
}
+static void mv_port_intr(struct ata_port *ap, u32 port_cause)
+{
+ struct mv_port_priv *pp;
+ int edma_was_enabled;
+
+ if (!ap || (ap->flags & ATA_FLAG_DISABLED)) {
+ mv_unexpected_intr(ap, 0);
+ return;
+ }
+ /*
+ * Grab a snapshot of the EDMA_EN flag setting,
+ * so that we have a consistent view for this port,
+ * even if something we call of our routines changes it.
+ */
+ pp = ap->private_data;
+ edma_was_enabled = (pp->pp_flags & MV_PP_FLAG_EDMA_EN);
+ /*
+ * Process completed CRPB response(s) before other events.
+ */
+ if (edma_was_enabled && (port_cause & DONE_IRQ)) {
+ mv_process_crpb_entries(ap, pp);
+ if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH)
+ mv_handle_fbs_ncq_dev_err(ap);
+ }
+ /*
+ * Handle chip-reported errors, or continue on to handle PIO.
+ */
+ if (unlikely(port_cause & ERR_IRQ)) {
+ mv_err_intr(ap);
+ } else if (!edma_was_enabled) {
+ struct ata_queued_cmd *qc = mv_get_active_qc(ap);
+ if (qc)
+ ata_sff_host_intr(ap, qc);
+ else
+ mv_unexpected_intr(ap, edma_was_enabled);
+ }
+}
+
/**
* mv_host_intr - Handle all interrupts on the given host controller
* @host: host specific structure
- * @relevant: port error bits relevant to this host controller
- * @hc: which host controller we're to look at
- *
- * Read then write clear the HC interrupt status then walk each
- * port connected to the HC and see if it needs servicing. Port
- * success ints are reported in the HC interrupt status reg, the
- * port error ints are reported in the higher level main
- * interrupt status register and thus are passed in via the
- * 'relevant' argument.
+ * @main_irq_cause: Main interrupt cause register for the chip.
*
* LOCKING:
* Inherited from caller.
*/
-static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc)
+static int mv_host_intr(struct ata_host *host, u32 main_irq_cause)
{
- void __iomem *mmio = host->iomap[MV_PRIMARY_BAR];
- void __iomem *hc_mmio = mv_hc_base(mmio, hc);
- u32 hc_irq_cause;
- int port, port0;
-
- if (hc == 0)
- port0 = 0;
- else
- port0 = MV_PORTS_PER_HC;
-
- /* we'll need the HC success int register in most cases */
- hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
- if (!hc_irq_cause)
- return;
-
- writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
-
- VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n",
- hc, relevant, hc_irq_cause);
+ struct mv_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->base, *hc_mmio;
+ unsigned int handled = 0, port;
- for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) {
+ for (port = 0; port < hpriv->n_ports; port++) {
struct ata_port *ap = host->ports[port];
- struct mv_port_priv *pp = ap->private_data;
- int have_err_bits, hard_port, shift;
+ unsigned int p, shift, hardport, port_cause;
- if ((!ap) || (ap->flags & ATA_FLAG_DISABLED))
- continue;
-
- shift = port << 1; /* (port * 2) */
- if (port >= MV_PORTS_PER_HC) {
- shift++; /* skip bit 8 in the HC Main IRQ reg */
- }
- have_err_bits = ((PORT0_ERR << shift) & relevant);
-
- if (unlikely(have_err_bits)) {
- struct ata_queued_cmd *qc;
-
- qc = ata_qc_from_tag(ap, ap->link.active_tag);
- if (qc && (qc->tf.flags & ATA_TFLAG_POLLING))
+ MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport);
+ /*
+ * Each hc within the host has its own hc_irq_cause register,
+ * where the interrupting ports bits get ack'd.
+ */
+ if (hardport == 0) { /* first port on this hc ? */
+ u32 hc_cause = (main_irq_cause >> shift) & HC0_IRQ_PEND;
+ u32 port_mask, ack_irqs;
+ /*
+ * Skip this entire hc if nothing pending for any ports
+ */
+ if (!hc_cause) {
+ port += MV_PORTS_PER_HC - 1;
continue;
-
- mv_err_intr(ap, qc);
- continue;
- }
-
- hard_port = mv_hardport_from_port(port); /* range 0..3 */
-
- if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
- if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause)
- mv_intr_edma(ap);
- } else {
- if ((DEV_IRQ << hard_port) & hc_irq_cause)
- mv_intr_pio(ap);
+ }
+ /*
+ * We don't need/want to read the hc_irq_cause register,
+ * because doing so hurts performance, and
+ * main_irq_cause already gives us everything we need.
+ *
+ * But we do have to *write* to the hc_irq_cause to ack
+ * the ports that we are handling this time through.
+ *
+ * This requires that we create a bitmap for those
+ * ports which interrupted us, and use that bitmap
+ * to ack (only) those ports via hc_irq_cause.
+ */
+ ack_irqs = 0;
+ for (p = 0; p < MV_PORTS_PER_HC; ++p) {
+ if ((port + p) >= hpriv->n_ports)
+ break;
+ port_mask = (DONE_IRQ | ERR_IRQ) << (p * 2);
+ if (hc_cause & port_mask)
+ ack_irqs |= (DMA_IRQ | DEV_IRQ) << p;
+ }
+ hc_mmio = mv_hc_base_from_port(mmio, port);
+ writelfl(~ack_irqs, hc_mmio + HC_IRQ_CAUSE_OFS);
+ handled = 1;
}
+ /*
+ * Handle interrupts signalled for this port:
+ */
+ port_cause = (main_irq_cause >> shift) & (DONE_IRQ | ERR_IRQ);
+ if (port_cause)
+ mv_port_intr(ap, port_cause);
}
- VPRINTK("EXIT\n");
+ return handled;
}
-static void mv_pci_error(struct ata_host *host, void __iomem *mmio)
+static int mv_pci_error(struct ata_host *host, void __iomem *mmio)
{
struct mv_host_priv *hpriv = host->private_data;
struct ata_port *ap;
ata_ehi_push_desc(ehi,
"PCI err cause 0x%08x", err_cause);
err_mask = AC_ERR_HOST_BUS;
- ehi->action = ATA_EH_HARDRESET;
+ ehi->action = ATA_EH_RESET;
qc = ata_qc_from_tag(ap, ap->link.active_tag);
if (qc)
qc->err_mask |= err_mask;
ata_port_freeze(ap);
}
}
+ return 1; /* handled */
}
/**
static irqreturn_t mv_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
- unsigned int hc, handled = 0, n_hcs;
- void __iomem *mmio = host->iomap[MV_PRIMARY_BAR];
- u32 irq_stat;
+ struct mv_host_priv *hpriv = host->private_data;
+ unsigned int handled = 0;
+ u32 main_irq_cause, pending_irqs;
- irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS);
-
- /* check the cases where we either have nothing pending or have read
- * a bogus register value which can indicate HW removal or PCI fault
- */
- if (!irq_stat || (0xffffffffU == irq_stat))
- return IRQ_NONE;
-
- n_hcs = mv_get_hc_count(host->ports[0]->flags);
spin_lock(&host->lock);
-
- if (unlikely(irq_stat & PCI_ERR)) {
- mv_pci_error(host, mmio);
- handled = 1;
- goto out_unlock; /* skip all other HC irq handling */
- }
-
- for (hc = 0; hc < n_hcs; hc++) {
- u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT));
- if (relevant) {
- mv_host_intr(host, relevant, hc);
- handled = 1;
- }
+ main_irq_cause = readl(hpriv->main_irq_cause_addr);
+ pending_irqs = main_irq_cause & hpriv->main_irq_mask;
+ /*
+ * Deal with cases where we either have nothing pending, or have read
+ * a bogus register value which can indicate HW removal or PCI fault.
+ */
+ if (pending_irqs && main_irq_cause != 0xffffffffU) {
+ if (unlikely((pending_irqs & PCI_ERR) && !IS_SOC(hpriv)))
+ handled = mv_pci_error(host, hpriv->base);
+ else
+ handled = mv_host_intr(host, pending_irqs);
}
-
-out_unlock:
spin_unlock(&host->lock);
-
return IRQ_RETVAL(handled);
}
-static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port)
-{
- void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port);
- unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL;
-
- return hc_mmio + ofs;
-}
-
static unsigned int mv5_scr_offset(unsigned int sc_reg_in)
{
unsigned int ofs;
return ofs;
}
-static int mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val)
+static int mv5_scr_read(struct ata_link *link, unsigned int sc_reg_in, u32 *val)
{
- void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
- void __iomem *addr = mv5_phy_base(mmio, ap->port_no);
+ struct mv_host_priv *hpriv = link->ap->host->private_data;
+ void __iomem *mmio = hpriv->base;
+ void __iomem *addr = mv5_phy_base(mmio, link->ap->port_no);
unsigned int ofs = mv5_scr_offset(sc_reg_in);
if (ofs != 0xffffffffU) {
return -EINVAL;
}
-static int mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
+static int mv5_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
{
- void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
- void __iomem *addr = mv5_phy_base(mmio, ap->port_no);
+ struct mv_host_priv *hpriv = link->ap->host->private_data;
+ void __iomem *mmio = hpriv->base;
+ void __iomem *addr = mv5_phy_base(mmio, link->ap->port_no);
unsigned int ofs = mv5_scr_offset(sc_reg_in);
if (ofs != 0xffffffffU) {
return -EINVAL;
}
-static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio)
+static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio)
{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
int early_5080;
early_5080 = (pdev->device == 0x5080) && (pdev->revision == 0);
writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL);
}
- mv_reset_pci_bus(pdev, mmio);
+ mv_reset_pci_bus(host, mmio);
}
static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
{
- writel(0x0fcfffff, mmio + MV_FLASH_CTL);
+ writel(0x0fcfffff, mmio + MV_FLASH_CTL_OFS);
}
static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx,
{
u32 tmp;
- writel(0, mmio + MV_GPIO_PORT_CTL);
+ writel(0, mmio + MV_GPIO_PORT_CTL_OFS);
/* FIXME: handle MV_HP_ERRATA_50XXB2 errata */
int fix_apm_sq = (hpriv->hp_flags & MV_HP_ERRATA_50XXB0);
if (fix_apm_sq) {
- tmp = readl(phy_mmio + MV5_LT_MODE);
+ tmp = readl(phy_mmio + MV5_LTMODE_OFS);
tmp |= (1 << 19);
- writel(tmp, phy_mmio + MV5_LT_MODE);
+ writel(tmp, phy_mmio + MV5_LTMODE_OFS);
- tmp = readl(phy_mmio + MV5_PHY_CTL);
+ tmp = readl(phy_mmio + MV5_PHY_CTL_OFS);
tmp &= ~0x3;
tmp |= 0x1;
- writel(tmp, phy_mmio + MV5_PHY_CTL);
+ writel(tmp, phy_mmio + MV5_PHY_CTL_OFS);
}
tmp = readl(phy_mmio + MV5_PHY_MODE);
{
void __iomem *port_mmio = mv_port_base(mmio, port);
- writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
-
- mv_channel_reset(hpriv, mmio, port);
+ mv_reset_channel(hpriv, mmio, port);
ZERO(0x028); /* command */
writel(0x11f, port_mmio + EDMA_CFG_OFS);
ZERO(0x024); /* respq outp */
ZERO(0x020); /* respq inp */
ZERO(0x02c); /* test control */
- writel(0xbc, port_mmio + EDMA_IORDY_TMOUT);
+ writel(0xbc, port_mmio + EDMA_IORDY_TMOUT_OFS);
}
#undef ZERO
#undef ZERO
#define ZERO(reg) writel(0, mmio + (reg))
-static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio)
+static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio)
{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
struct mv_host_priv *hpriv = host->private_data;
u32 tmp;
- tmp = readl(mmio + MV_PCI_MODE);
+ tmp = readl(mmio + MV_PCI_MODE_OFS);
tmp &= 0xff00ffff;
- writel(tmp, mmio + MV_PCI_MODE);
+ writel(tmp, mmio + MV_PCI_MODE_OFS);
ZERO(MV_PCI_DISC_TIMER);
ZERO(MV_PCI_MSI_TRIGGER);
- writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT);
- ZERO(HC_MAIN_IRQ_MASK_OFS);
+ writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT_OFS);
ZERO(MV_PCI_SERR_MASK);
ZERO(hpriv->irq_cause_ofs);
ZERO(hpriv->irq_mask_ofs);
mv5_reset_flash(hpriv, mmio);
- tmp = readl(mmio + MV_GPIO_PORT_CTL);
+ tmp = readl(mmio + MV_GPIO_PORT_CTL_OFS);
tmp &= 0x3;
tmp |= (1 << 5) | (1 << 6);
- writel(tmp, mmio + MV_GPIO_PORT_CTL);
+ writel(tmp, mmio + MV_GPIO_PORT_CTL_OFS);
}
/**
void __iomem *port_mmio;
u32 tmp;
- tmp = readl(mmio + MV_RESET_CFG);
+ tmp = readl(mmio + MV_RESET_CFG_OFS);
if ((tmp & (1 << 0)) == 0) {
hpriv->signal[idx].amps = 0x7 << 8;
hpriv->signal[idx].pre = 0x1 << 5;
static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
{
- writel(0x00000060, mmio + MV_GPIO_PORT_CTL);
+ writel(0x00000060, mmio + MV_GPIO_PORT_CTL_OFS);
}
static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
int fix_phy_mode4 =
hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
- u32 m2, tmp;
+ u32 m2, m3;
if (fix_phy_mode2) {
m2 = readl(port_mmio + PHY_MODE2);
udelay(200);
}
- /* who knows what this magic does */
- tmp = readl(port_mmio + PHY_MODE3);
- tmp &= ~0x7F800000;
- tmp |= 0x2A800000;
- writel(tmp, port_mmio + PHY_MODE3);
-
- if (fix_phy_mode4) {
- u32 m4;
-
- m4 = readl(port_mmio + PHY_MODE4);
-
- if (hp_flags & MV_HP_ERRATA_60X1B2)
- tmp = readl(port_mmio + 0x310);
+ /*
+ * Gen-II/IIe PHY_MODE3 errata RM#2:
+ * Achieves better receiver noise performance than the h/w default:
+ */
+ m3 = readl(port_mmio + PHY_MODE3);
+ m3 = (m3 & 0x1f) | (0x5555601 << 5);
- m4 = (m4 & ~(1 << 1)) | (1 << 0);
+ /* Guideline 88F5182 (GL# SATA-S11) */
+ if (IS_SOC(hpriv))
+ m3 &= ~0x1c;
+ if (fix_phy_mode4) {
+ u32 m4 = readl(port_mmio + PHY_MODE4);
+ /*
+ * Enforce reserved-bit restrictions on GenIIe devices only.
+ * For earlier chipsets, force only the internal config field
+ * (workaround for errata FEr SATA#10 part 1).
+ */
+ if (IS_GEN_IIE(hpriv))
+ m4 = (m4 & ~PHY_MODE4_RSVD_ZEROS) | PHY_MODE4_RSVD_ONES;
+ else
+ m4 = (m4 & ~PHY_MODE4_CFG_MASK) | PHY_MODE4_CFG_VALUE;
writel(m4, port_mmio + PHY_MODE4);
-
- if (hp_flags & MV_HP_ERRATA_60X1B2)
- writel(tmp, port_mmio + 0x310);
}
+ /*
+ * Workaround for 60x1-B2 errata SATA#13:
+ * Any write to PHY_MODE4 (above) may corrupt PHY_MODE3,
+ * so we must always rewrite PHY_MODE3 after PHY_MODE4.
+ */
+ writel(m3, port_mmio + PHY_MODE3);
/* Revert values of pre-emphasis and signal amps to the saved ones */
m2 = readl(port_mmio + PHY_MODE2);
writel(m2, port_mmio + PHY_MODE2);
}
-static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
- unsigned int port_no)
+/* TODO: use the generic LED interface to configure the SATA Presence */
+/* & Acitivy LEDs on the board */
+static void mv_soc_enable_leds(struct mv_host_priv *hpriv,
+ void __iomem *mmio)
{
- void __iomem *port_mmio = mv_port_base(mmio, port_no);
-
- writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
-
- if (IS_GEN_II(hpriv)) {
- u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
- ifctl |= (1 << 7); /* enable gen2i speed */
- ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
- writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
- }
-
- udelay(25); /* allow reset propagation */
-
- /* Spec never mentions clearing the bit. Marvell's driver does
- * clear the bit, however.
- */
- writelfl(0, port_mmio + EDMA_CMD_OFS);
-
- hpriv->ops->phy_errata(hpriv, mmio, port_no);
-
- if (IS_GEN_I(hpriv))
- mdelay(1);
+ return;
}
-/**
- * mv_phy_reset - Perform eDMA reset followed by COMRESET
- * @ap: ATA channel to manipulate
- *
- * Part of this is taken from __sata_phy_reset and modified to
- * not sleep since this routine gets called from interrupt level.
- *
- * LOCKING:
- * Inherited from caller. This is coded to safe to call at
- * interrupt level, i.e. it does not sleep.
- */
-static void mv_phy_reset(struct ata_port *ap, unsigned int *class,
- unsigned long deadline)
+static void mv_soc_read_preamp(struct mv_host_priv *hpriv, int idx,
+ void __iomem *mmio)
{
- struct mv_port_priv *pp = ap->private_data;
- struct mv_host_priv *hpriv = ap->host->private_data;
- void __iomem *port_mmio = mv_ap_base(ap);
- int retry = 5;
- u32 sstatus;
-
- VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio);
-
-#ifdef DEBUG
- {
- u32 sstatus, serror, scontrol;
-
- mv_scr_read(ap, SCR_STATUS, &sstatus);
- mv_scr_read(ap, SCR_ERROR, &serror);
- mv_scr_read(ap, SCR_CONTROL, &scontrol);
- DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x "
- "SCtrl 0x%08x\n", sstatus, serror, scontrol);
- }
-#endif
+ void __iomem *port_mmio;
+ u32 tmp;
- /* Issue COMRESET via SControl */
-comreset_retry:
- sata_scr_write_flush(&ap->link, SCR_CONTROL, 0x301);
- msleep(1);
+ port_mmio = mv_port_base(mmio, idx);
+ tmp = readl(port_mmio + PHY_MODE2);
- sata_scr_write_flush(&ap->link, SCR_CONTROL, 0x300);
- msleep(20);
+ hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */
+ hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */
+}
- do {
- sata_scr_read(&ap->link, SCR_STATUS, &sstatus);
- if (((sstatus & 0x3) == 3) || ((sstatus & 0x3) == 0))
- break;
+#undef ZERO
+#define ZERO(reg) writel(0, port_mmio + (reg))
+static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int port)
+{
+ void __iomem *port_mmio = mv_port_base(mmio, port);
- msleep(1);
- } while (time_before(jiffies, deadline));
+ mv_reset_channel(hpriv, mmio, port);
- /* work around errata */
- if (IS_GEN_II(hpriv) &&
- (sstatus != 0x0) && (sstatus != 0x113) && (sstatus != 0x123) &&
- (retry-- > 0))
- goto comreset_retry;
+ ZERO(0x028); /* command */
+ writel(0x101f, port_mmio + EDMA_CFG_OFS);
+ ZERO(0x004); /* timer */
+ ZERO(0x008); /* irq err cause */
+ ZERO(0x00c); /* irq err mask */
+ ZERO(0x010); /* rq bah */
+ ZERO(0x014); /* rq inp */
+ ZERO(0x018); /* rq outp */
+ ZERO(0x01c); /* respq bah */
+ ZERO(0x024); /* respq outp */
+ ZERO(0x020); /* respq inp */
+ ZERO(0x02c); /* test control */
+ writel(0xbc, port_mmio + EDMA_IORDY_TMOUT_OFS);
+}
-#ifdef DEBUG
- {
- u32 sstatus, serror, scontrol;
+#undef ZERO
- mv_scr_read(ap, SCR_STATUS, &sstatus);
- mv_scr_read(ap, SCR_ERROR, &serror);
- mv_scr_read(ap, SCR_CONTROL, &scontrol);
- DPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x "
- "SCtrl 0x%08x\n", sstatus, serror, scontrol);
- }
-#endif
+#define ZERO(reg) writel(0, hc_mmio + (reg))
+static void mv_soc_reset_one_hc(struct mv_host_priv *hpriv,
+ void __iomem *mmio)
+{
+ void __iomem *hc_mmio = mv_hc_base(mmio, 0);
- if (ata_link_offline(&ap->link)) {
- *class = ATA_DEV_NONE;
- return;
- }
+ ZERO(0x00c);
+ ZERO(0x010);
+ ZERO(0x014);
- /* even after SStatus reflects that device is ready,
- * it seems to take a while for link to be fully
- * established (and thus Status no longer 0x80/0x7F),
- * so we poll a bit for that, here.
- */
- retry = 20;
- while (1) {
- u8 drv_stat = ata_check_status(ap);
- if ((drv_stat != 0x80) && (drv_stat != 0x7f))
- break;
- msleep(500);
- if (retry-- <= 0)
- break;
- if (time_after(jiffies, deadline))
- break;
- }
+}
- /* FIXME: if we passed the deadline, the following
- * code probably produces an invalid result
- */
+#undef ZERO
- /* finally, read device signature from TF registers */
- *class = ata_dev_try_classify(ap->link.device, 1, NULL);
+static int mv_soc_reset_hc(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int n_hc)
+{
+ unsigned int port;
- writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+ for (port = 0; port < hpriv->n_ports; port++)
+ mv_soc_reset_hc_port(hpriv, mmio, port);
- WARN_ON(pp->pp_flags & MV_PP_FLAG_EDMA_EN);
+ mv_soc_reset_one_hc(hpriv, mmio);
- VPRINTK("EXIT\n");
+ return 0;
}
-static int mv_prereset(struct ata_link *link, unsigned long deadline)
+static void mv_soc_reset_flash(struct mv_host_priv *hpriv,
+ void __iomem *mmio)
{
- struct ata_port *ap = link->ap;
- struct mv_port_priv *pp = ap->private_data;
- struct ata_eh_context *ehc = &link->eh_context;
- int rc;
-
- rc = mv_stop_dma(ap);
- if (rc)
- ehc->i.action |= ATA_EH_HARDRESET;
-
- if (!(pp->pp_flags & MV_PP_FLAG_HAD_A_RESET)) {
- pp->pp_flags |= MV_PP_FLAG_HAD_A_RESET;
- ehc->i.action |= ATA_EH_HARDRESET;
- }
+ return;
+}
- /* if we're about to do hardreset, nothing more to do */
- if (ehc->i.action & ATA_EH_HARDRESET)
- return 0;
+static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio)
+{
+ return;
+}
- if (ata_link_online(link))
- rc = ata_wait_ready(ap, deadline);
- else
- rc = -ENODEV;
+static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i)
+{
+ u32 ifcfg = readl(port_mmio + SATA_INTERFACE_CFG_OFS);
- return rc;
+ ifcfg = (ifcfg & 0xf7f) | 0x9b1000; /* from chip spec */
+ if (want_gen2i)
+ ifcfg |= (1 << 7); /* enable gen2i speed */
+ writelfl(ifcfg, port_mmio + SATA_INTERFACE_CFG_OFS);
}
-static int mv_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
+static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port_no)
{
- struct ata_port *ap = link->ap;
- struct mv_host_priv *hpriv = ap->host->private_data;
- void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
+ void __iomem *port_mmio = mv_port_base(mmio, port_no);
- mv_stop_dma(ap);
+ /*
+ * The datasheet warns against setting EDMA_RESET when EDMA is active
+ * (but doesn't say what the problem might be). So we first try
+ * to disable the EDMA engine before doing the EDMA_RESET operation.
+ */
+ mv_stop_edma_engine(port_mmio);
+ writelfl(EDMA_RESET, port_mmio + EDMA_CMD_OFS);
- mv_channel_reset(hpriv, mmio, ap->port_no);
+ if (!IS_GEN_I(hpriv)) {
+ /* Enable 3.0gb/s link speed: this survives EDMA_RESET */
+ mv_setup_ifcfg(port_mmio, 1);
+ }
+ /*
+ * Strobing EDMA_RESET here causes a hard reset of the SATA transport,
+ * link, and physical layers. It resets all SATA interface registers
+ * (except for SATA_INTERFACE_CFG), and issues a COMRESET to the dev.
+ */
+ writelfl(EDMA_RESET, port_mmio + EDMA_CMD_OFS);
+ udelay(25); /* allow reset propagation */
+ writelfl(0, port_mmio + EDMA_CMD_OFS);
- mv_phy_reset(ap, class, deadline);
+ hpriv->ops->phy_errata(hpriv, mmio, port_no);
- return 0;
+ if (IS_GEN_I(hpriv))
+ mdelay(1);
}
-static void mv_postreset(struct ata_link *link, unsigned int *classes)
+static void mv_pmp_select(struct ata_port *ap, int pmp)
{
- struct ata_port *ap = link->ap;
- u32 serr;
-
- /* print link status */
- sata_print_link_status(link);
+ if (sata_pmp_supported(ap)) {
+ void __iomem *port_mmio = mv_ap_base(ap);
+ u32 reg = readl(port_mmio + SATA_IFCTL_OFS);
+ int old = reg & 0xf;
- /* clear SError */
- sata_scr_read(link, SCR_ERROR, &serr);
- sata_scr_write_flush(link, SCR_ERROR, serr);
-
- /* bail out if no device is present */
- if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
- DPRINTK("EXIT, no device\n");
- return;
+ if (old != pmp) {
+ reg = (reg & ~0xf) | pmp;
+ writelfl(reg, port_mmio + SATA_IFCTL_OFS);
+ }
}
-
- /* set up device control */
- iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
}
-static void mv_error_handler(struct ata_port *ap)
+static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
{
- ata_do_eh(ap, mv_prereset, ata_std_softreset,
- mv_hardreset, mv_postreset);
+ mv_pmp_select(link->ap, sata_srst_pmp(link));
+ return sata_std_hardreset(link, class, deadline);
}
-static void mv_post_int_cmd(struct ata_queued_cmd *qc)
+static int mv_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
{
- mv_stop_dma(qc->ap);
+ mv_pmp_select(link->ap, sata_srst_pmp(link));
+ return ata_sff_softreset(link, class, deadline);
}
-static void mv_eh_freeze(struct ata_port *ap)
+static int mv_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
{
- void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
- unsigned int hc = (ap->port_no > 3) ? 1 : 0;
- u32 tmp, mask;
- unsigned int shift;
+ struct ata_port *ap = link->ap;
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ struct mv_port_priv *pp = ap->private_data;
+ void __iomem *mmio = hpriv->base;
+ int rc, attempts = 0, extra = 0;
+ u32 sstatus;
+ bool online;
- /* FIXME: handle coalescing completion events properly */
+ mv_reset_channel(hpriv, mmio, ap->port_no);
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
- shift = ap->port_no * 2;
- if (hc > 0)
- shift++;
+ /* Workaround for errata FEr SATA#10 (part 2) */
+ do {
+ const unsigned long *timing =
+ sata_ehc_deb_timing(&link->eh_context);
- mask = 0x3 << shift;
+ rc = sata_link_hardreset(link, timing, deadline + extra,
+ &online, NULL);
+ rc = online ? -EAGAIN : rc;
+ if (rc)
+ return rc;
+ sata_scr_read(link, SCR_STATUS, &sstatus);
+ if (!IS_GEN_I(hpriv) && ++attempts >= 5 && sstatus == 0x121) {
+ /* Force 1.5gb/s link speed and try again */
+ mv_setup_ifcfg(mv_ap_base(ap), 0);
+ if (time_after(jiffies + HZ, deadline))
+ extra = HZ; /* only extend it once, max */
+ }
+ } while (sstatus != 0x0 && sstatus != 0x113 && sstatus != 0x123);
- /* disable assertion of portN err, done events */
- tmp = readl(mmio + HC_MAIN_IRQ_MASK_OFS);
- writelfl(tmp & ~mask, mmio + HC_MAIN_IRQ_MASK_OFS);
+ return rc;
+}
+
+static void mv_eh_freeze(struct ata_port *ap)
+{
+ mv_stop_edma(ap);
+ mv_enable_port_irqs(ap, 0);
}
static void mv_eh_thaw(struct ata_port *ap)
{
- void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
- unsigned int hc = (ap->port_no > 3) ? 1 : 0;
- void __iomem *hc_mmio = mv_hc_base(mmio, hc);
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ unsigned int port = ap->port_no;
+ unsigned int hardport = mv_hardport_from_port(port);
+ void __iomem *hc_mmio = mv_hc_base_from_port(hpriv->base, port);
void __iomem *port_mmio = mv_ap_base(ap);
- u32 tmp, mask, hc_irq_cause;
- unsigned int shift, hc_port_no = ap->port_no;
-
- /* FIXME: handle coalescing completion events properly */
-
- shift = ap->port_no * 2;
- if (hc > 0) {
- shift++;
- hc_port_no -= 4;
- }
-
- mask = 0x3 << shift;
+ u32 hc_irq_cause;
/* clear EDMA errors on this port */
writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
/* clear pending irq events */
hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
- hc_irq_cause &= ~(1 << hc_port_no); /* clear CRPB-done */
- hc_irq_cause &= ~(1 << (hc_port_no + 8)); /* clear Device int */
- writel(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
+ hc_irq_cause &= ~((DEV_IRQ | DMA_IRQ) << hardport);
+ writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
- /* enable assertion of portN err, done events */
- tmp = readl(mmio + HC_MAIN_IRQ_MASK_OFS);
- writelfl(tmp | mask, mmio + HC_MAIN_IRQ_MASK_OFS);
+ mv_enable_port_irqs(ap, ERR_IRQ);
}
/**
writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs);
writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
- /* unmask all EDMA error interrupts */
- writelfl(~0, port_mmio + EDMA_ERR_IRQ_MASK_OFS);
+ /* unmask all non-transient EDMA error interrupts */
+ writelfl(~EDMA_ERR_IRQ_TRANSIENT, port_mmio + EDMA_ERR_IRQ_MASK_OFS);
VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n",
readl(port_mmio + EDMA_CFG_OFS),
readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS));
}
+static unsigned int mv_in_pcix_mode(struct ata_host *host)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->base;
+ u32 reg;
+
+ if (IS_SOC(hpriv) || !IS_PCIE(hpriv))
+ return 0; /* not PCI-X capable */
+ reg = readl(mmio + MV_PCI_MODE_OFS);
+ if ((reg & MV_PCI_MODE_MASK) == 0)
+ return 0; /* conventional PCI mode */
+ return 1; /* chip is in PCI-X mode */
+}
+
+static int mv_pci_cut_through_okay(struct ata_host *host)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->base;
+ u32 reg;
+
+ if (!mv_in_pcix_mode(host)) {
+ reg = readl(mmio + PCI_COMMAND_OFS);
+ if (reg & PCI_COMMAND_MRDTRIG)
+ return 0; /* not okay */
+ }
+ return 1; /* okay */
+}
+
static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
{
struct pci_dev *pdev = to_pci_dev(host->dev);
break;
case chip_7042:
- hp_flags |= MV_HP_PCIE;
+ hp_flags |= MV_HP_PCIE | MV_HP_CUT_THROUGH;
+ if (pdev->vendor == PCI_VENDOR_ID_TTI &&
+ (pdev->device == 0x2300 || pdev->device == 0x2310))
+ {
+ /*
+ * Highpoint RocketRAID PCIe 23xx series cards:
+ *
+ * Unconfigured drives are treated as "Legacy"
+ * by the BIOS, and it overwrites sector 8 with
+ * a "Lgcy" metadata block prior to Linux boot.
+ *
+ * Configured drives (RAID or JBOD) leave sector 8
+ * alone, but instead overwrite a high numbered
+ * sector for the RAID metadata. This sector can
+ * be determined exactly, by truncating the physical
+ * drive capacity to a nice even GB value.
+ *
+ * RAID metadata is at: (dev->n_sectors & ~0xfffff)
+ *
+ * Warn the user, lest they think we're just buggy.
+ */
+ printk(KERN_WARNING DRV_NAME ": Highpoint RocketRAID"
+ " BIOS CORRUPTS DATA on all attached drives,"
+ " regardless of if/how they are configured."
+ " BEWARE!\n");
+ printk(KERN_WARNING DRV_NAME ": For data safety, do not"
+ " use sectors 8-9 on \"Legacy\" drives,"
+ " and avoid the final two gigabytes on"
+ " all RocketRAID BIOS initialized drives.\n");
+ }
+ /* drop through */
case chip_6042:
hpriv->ops = &mv6xxx_ops;
hp_flags |= MV_HP_GEN_IIE;
+ if (board_idx == chip_6042 && mv_pci_cut_through_okay(host))
+ hp_flags |= MV_HP_CUT_THROUGH;
switch (pdev->revision) {
- case 0x0:
- hp_flags |= MV_HP_ERRATA_XX42A0;
- break;
- case 0x1:
+ case 0x2: /* Rev.B0: the first/only public release */
hp_flags |= MV_HP_ERRATA_60X1C0;
break;
default:
break;
}
break;
+ case chip_soc:
+ hpriv->ops = &mv_soc_ops;
+ hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE |
+ MV_HP_ERRATA_60X1C0;
+ break;
default:
- dev_printk(KERN_ERR, &pdev->dev,
+ dev_printk(KERN_ERR, host->dev,
"BUG: invalid board index %u\n", board_idx);
return 1;
}
static int mv_init_host(struct ata_host *host, unsigned int board_idx)
{
int rc = 0, n_hc, port, hc;
- struct pci_dev *pdev = to_pci_dev(host->dev);
- void __iomem *mmio = host->iomap[MV_PRIMARY_BAR];
struct mv_host_priv *hpriv = host->private_data;
-
- /* global interrupt mask */
- writel(0, mmio + HC_MAIN_IRQ_MASK_OFS);
+ void __iomem *mmio = hpriv->base;
rc = mv_chip_id(host, board_idx);
if (rc)
goto done;
+ if (IS_SOC(hpriv)) {
+ hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE_OFS;
+ hpriv->main_irq_mask_addr = mmio + SOC_HC_MAIN_IRQ_MASK_OFS;
+ } else {
+ hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS;
+ hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
+ }
+
+ /* global interrupt mask: 0 == mask everything */
+ mv_set_main_irq_mask(host, ~0, 0);
+
n_hc = mv_get_hc_count(host->ports[0]->flags);
for (port = 0; port < host->n_ports; port++)
goto done;
hpriv->ops->reset_flash(hpriv, mmio);
- hpriv->ops->reset_bus(pdev, mmio);
+ hpriv->ops->reset_bus(host, mmio);
hpriv->ops->enable_leds(hpriv, mmio);
for (port = 0; port < host->n_ports; port++) {
- if (IS_GEN_II(hpriv)) {
- void __iomem *port_mmio = mv_port_base(mmio, port);
-
- u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
- ifctl |= (1 << 7); /* enable gen2i speed */
- ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
- writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
- }
-
- hpriv->ops->phy_errata(hpriv, mmio, port);
- }
-
- for (port = 0; port < host->n_ports; port++) {
struct ata_port *ap = host->ports[port];
void __iomem *port_mmio = mv_port_base(mmio, port);
- unsigned int offset = port_mmio - mmio;
mv_port_init(&ap->ioaddr, port_mmio);
- ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio");
- ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port");
+#ifdef CONFIG_PCI
+ if (!IS_SOC(hpriv)) {
+ unsigned int offset = port_mmio - mmio;
+ ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio");
+ ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port");
+ }
+#endif
}
for (hc = 0; hc < n_hc; hc++) {
writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
}
- /* Clear any currently outstanding host interrupt conditions */
- writelfl(0, mmio + hpriv->irq_cause_ofs);
+ if (!IS_SOC(hpriv)) {
+ /* Clear any currently outstanding host interrupt conditions */
+ writelfl(0, mmio + hpriv->irq_cause_ofs);
- /* and unmask interrupt generation for host regs */
- writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
+ /* and unmask interrupt generation for host regs */
+ writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
- if (IS_GEN_I(hpriv))
- writelfl(~HC_MAIN_MASKED_IRQS_5, mmio + HC_MAIN_IRQ_MASK_OFS);
- else
- writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS);
+ /*
+ * enable only global host interrupts for now.
+ * The per-port interrupts get done later as ports are set up.
+ */
+ mv_set_main_irq_mask(host, 0, PCI_ERR);
+ }
+done:
+ return rc;
+}
- VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x "
- "PCI int cause/mask=0x%08x/0x%08x\n",
- readl(mmio + HC_MAIN_IRQ_CAUSE_OFS),
- readl(mmio + HC_MAIN_IRQ_MASK_OFS),
- readl(mmio + hpriv->irq_cause_ofs),
- readl(mmio + hpriv->irq_mask_ofs));
+static int mv_create_dma_pools(struct mv_host_priv *hpriv, struct device *dev)
+{
+ hpriv->crqb_pool = dmam_pool_create("crqb_q", dev, MV_CRQB_Q_SZ,
+ MV_CRQB_Q_SZ, 0);
+ if (!hpriv->crqb_pool)
+ return -ENOMEM;
+
+ hpriv->crpb_pool = dmam_pool_create("crpb_q", dev, MV_CRPB_Q_SZ,
+ MV_CRPB_Q_SZ, 0);
+ if (!hpriv->crpb_pool)
+ return -ENOMEM;
+
+ hpriv->sg_tbl_pool = dmam_pool_create("sg_tbl", dev, MV_SG_TBL_SZ,
+ MV_SG_TBL_SZ, 0);
+ if (!hpriv->sg_tbl_pool)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void mv_conf_mbus_windows(struct mv_host_priv *hpriv,
+ struct mbus_dram_target_info *dram)
+{
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ writel(0, hpriv->base + WINDOW_CTRL(i));
+ writel(0, hpriv->base + WINDOW_BASE(i));
+ }
+
+ for (i = 0; i < dram->num_cs; i++) {
+ struct mbus_dram_window *cs = dram->cs + i;
+
+ writel(((cs->size - 1) & 0xffff0000) |
+ (cs->mbus_attr << 8) |
+ (dram->mbus_dram_target_id << 4) | 1,
+ hpriv->base + WINDOW_CTRL(i));
+ writel(cs->base, hpriv->base + WINDOW_BASE(i));
+ }
+}
+
+/**
+ * mv_platform_probe - handle a positive probe of an soc Marvell
+ * host
+ * @pdev: platform device found
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv_platform_probe(struct platform_device *pdev)
+{
+ static int printed_version;
+ const struct mv_sata_platform_data *mv_platform_data;
+ const struct ata_port_info *ppi[] =
+ { &mv_port_info[chip_soc], NULL };
+ struct ata_host *host;
+ struct mv_host_priv *hpriv;
+ struct resource *res;
+ int n_ports, rc;
+
+ if (!printed_version++)
+ dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
+
+ /*
+ * Simple resource validation ..
+ */
+ if (unlikely(pdev->num_resources != 2)) {
+ dev_err(&pdev->dev, "invalid number of resources\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Get the register base first
+ */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL)
+ return -EINVAL;
+
+ /* allocate host */
+ mv_platform_data = pdev->dev.platform_data;
+ n_ports = mv_platform_data->n_ports;
+
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+ hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
+
+ if (!host || !hpriv)
+ return -ENOMEM;
+ host->private_data = hpriv;
+ hpriv->n_ports = n_ports;
+
+ host->iomap = NULL;
+ hpriv->base = devm_ioremap(&pdev->dev, res->start,
+ res->end - res->start + 1);
+ hpriv->base -= MV_SATAHC0_REG_BASE;
+
+ /*
+ * (Re-)program MBUS remapping windows if we are asked to.
+ */
+ if (mv_platform_data->dram != NULL)
+ mv_conf_mbus_windows(hpriv, mv_platform_data->dram);
+
+ rc = mv_create_dma_pools(hpriv, &pdev->dev);
+ if (rc)
+ return rc;
+
+ /* initialize adapter */
+ rc = mv_init_host(host, chip_soc);
+ if (rc)
+ return rc;
+
+ dev_printk(KERN_INFO, &pdev->dev,
+ "slots %u ports %d\n", (unsigned)MV_MAX_Q_DEPTH,
+ host->n_ports);
+
+ return ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt,
+ IRQF_SHARED, &mv6_sht);
+}
+
+/*
+ *
+ * mv_platform_remove - unplug a platform interface
+ * @pdev: platform device
+ *
+ * A platform bus SATA device has been unplugged. Perform the needed
+ * cleanup. Also called on module unload for any active devices.
+ */
+static int __devexit mv_platform_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ata_host *host = dev_get_drvdata(dev);
+
+ ata_host_detach(host);
+ return 0;
+}
+
+static struct platform_driver mv_platform_driver = {
+ .probe = mv_platform_probe,
+ .remove = __devexit_p(mv_platform_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+
+#ifdef CONFIG_PCI
+static int mv_pci_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent);
+
+
+static struct pci_driver mv_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = mv_pci_tbl,
+ .probe = mv_pci_init_one,
+ .remove = ata_pci_remove_one,
+};
+
+/*
+ * module options
+ */
+static int msi; /* Use PCI msi; either zero (off, default) or non-zero */
+
+
+/* move to PCI layer or libata core? */
+static int pci_go_64(struct pci_dev *pdev)
+{
+ int rc;
+
+ if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+ if (rc) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "64-bit DMA enable failed\n");
+ return rc;
+ }
+ }
+ } else {
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
+ return rc;
+ }
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
+ return rc;
+ }
+ }
-done:
return rc;
}
}
/**
- * mv_init_one - handle a positive probe of a Marvell host
+ * mv_pci_init_one - handle a positive probe of a PCI Marvell host
* @pdev: PCI device found
* @ent: PCI device ID entry for the matched host
*
* LOCKING:
* Inherited from caller.
*/
-static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+static int mv_pci_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
static int printed_version;
unsigned int board_idx = (unsigned int)ent->driver_data;
if (!host || !hpriv)
return -ENOMEM;
host->private_data = hpriv;
+ hpriv->n_ports = n_ports;
/* acquire resources */
rc = pcim_enable_device(pdev);
if (rc)
return rc;
host->iomap = pcim_iomap_table(pdev);
+ hpriv->base = host->iomap[MV_PRIMARY_BAR];
rc = pci_go_64(pdev);
if (rc)
return rc;
+ rc = mv_create_dma_pools(hpriv, &pdev->dev);
+ if (rc)
+ return rc;
+
/* initialize adapter */
rc = mv_init_host(host, board_idx);
if (rc)
return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED,
IS_GEN_I(hpriv) ? &mv5_sht : &mv6_sht);
}
+#endif
+
+static int mv_platform_probe(struct platform_device *pdev);
+static int __devexit mv_platform_remove(struct platform_device *pdev);
static int __init mv_init(void)
{
- return pci_register_driver(&mv_pci_driver);
+ int rc = -ENODEV;
+#ifdef CONFIG_PCI
+ rc = pci_register_driver(&mv_pci_driver);
+ if (rc < 0)
+ return rc;
+#endif
+ rc = platform_driver_register(&mv_platform_driver);
+
+#ifdef CONFIG_PCI
+ if (rc < 0)
+ pci_unregister_driver(&mv_pci_driver);
+#endif
+ return rc;
}
static void __exit mv_exit(void)
{
+#ifdef CONFIG_PCI
pci_unregister_driver(&mv_pci_driver);
+#endif
+ platform_driver_unregister(&mv_platform_driver);
}
MODULE_AUTHOR("Brett Russ");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:" DRV_NAME);
+#ifdef CONFIG_PCI
module_param(msi, int, 0444);
MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)");
+#endif
module_init(mv_init);
module_exit(mv_exit);