/*
* sata_mv.c - Marvell SATA support
*
+ * Copyright 2008: Marvell Corporation, all rights reserved.
* Copyright 2005: EMC Corporation, all rights reserved.
* Copyright 2005 Red Hat, Inc. All rights reserved.
*
*
*/
+/*
+ * sata_mv TODO list:
+ *
+ * --> Errata workaround for NCQ device errors.
+ *
+ * --> More errata workarounds for PCI-X.
+ *
+ * --> Complete a full errata audit for all chipsets to identify others.
+ *
+ * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it).
+ *
+ * --> Investigate problems with PCI Message Signalled Interrupts (MSI).
+ *
+ * --> Cache frequently-accessed registers in mv_port_priv to reduce overhead.
+ *
+ * --> Develop a low-power-consumption strategy, and implement it.
+ *
+ * --> [Experiment, low priority] Investigate interrupt coalescing.
+ * Quite often, especially with PCI Message Signalled Interrupts (MSI),
+ * the overhead reduced by interrupt mitigation is quite often not
+ * worth the latency cost.
+ *
+ * --> [Experiment, Marvell value added] Is it possible to use target
+ * mode to cross-connect two Linux boxes with Marvell cards? If so,
+ * creating LibATA target mode support would be very interesting.
+ *
+ * Target mode, for those without docs, is the ability to directly
+ * connect two SATA ports.
+ */
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/dmapool.h>
#include <linux/dma-mapping.h>
#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mbus.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
#include <linux/libata.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "0.81"
+#define DRV_VERSION "1.20"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
MV_IRQ_COAL_TIME_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xd0),
MV_SATAHC0_REG_BASE = 0x20000,
- MV_FLASH_CTL = 0x1046c,
- MV_GPIO_PORT_CTL = 0x104f0,
- MV_RESET_CFG = 0x180d8,
+ MV_FLASH_CTL_OFS = 0x1046c,
+ MV_GPIO_PORT_CTL_OFS = 0x104f0,
+ MV_RESET_CFG_OFS = 0x180d8,
MV_PCI_REG_SZ = MV_MAJOR_REG_AREA_SZ,
MV_SATAHC_REG_SZ = MV_MAJOR_REG_AREA_SZ,
MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */
MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ,
- MV_USE_Q_DEPTH = ATA_DEF_QUEUE,
-
MV_MAX_Q_DEPTH = 32,
MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1,
/* CRQB needs alignment on a 1KB boundary. Size == 1KB
* CRPB needs alignment on a 256B boundary. Size == 256B
- * SG count of 176 leads to MV_PORT_PRIV_DMA_SZ == 4KB
* ePRD (SG) entries need alignment on a 16B boundary. Size == 16B
*/
MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH),
MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH),
- MV_MAX_SG_CT = 176,
+ MV_MAX_SG_CT = 256,
MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT),
- MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ),
- MV_PORTS_PER_HC = 4,
- /* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */
+ /* Determine hc from 0-7 port: hc = port >> MV_PORT_HC_SHIFT */
MV_PORT_HC_SHIFT = 2,
- /* == (port % MV_PORTS_PER_HC) to determine hard port from 0-7 port */
- MV_PORT_MASK = 3,
+ MV_PORTS_PER_HC = (1 << MV_PORT_HC_SHIFT), /* 4 */
+ /* Determine hc port from 0-7 port: hardport = port & MV_PORT_MASK */
+ MV_PORT_MASK = (MV_PORTS_PER_HC - 1), /* 3 */
/* Host Flags */
MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
- MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
- ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING),
+ /* SoC integrated controllers, no PCI interface */
+ MV_FLAG_SOC = (1 << 28),
+
+ MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
+ ATA_FLAG_PIO_POLLING,
MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE,
CRQB_FLAG_READ = (1 << 0),
CRQB_TAG_SHIFT = 1,
+ CRQB_IOID_SHIFT = 6, /* CRQB Gen-II/IIE IO Id shift */
+ CRQB_PMP_SHIFT = 12, /* CRQB Gen-II/IIE PMP shift */
+ CRQB_HOSTQ_SHIFT = 17, /* CRQB Gen-II/IIE HostQueTag shift */
CRQB_CMD_ADDR_SHIFT = 8,
CRQB_CMD_CS = (0x2 << 11),
CRQB_CMD_LAST = (1 << 15),
CRPB_FLAG_STATUS_SHIFT = 8,
+ CRPB_IOID_SHIFT_6 = 5, /* CRPB Gen-II IO Id shift */
+ CRPB_IOID_SHIFT_7 = 7, /* CRPB Gen-IIE IO Id shift */
EPRD_FLAG_END_OF_TBL = (1 << 31),
/* PCI interface registers */
PCI_COMMAND_OFS = 0xc00,
+ PCI_COMMAND_MRDTRIG = (1 << 7), /* PCI Master Read Trigger */
PCI_MAIN_CMD_STS_OFS = 0xd30,
STOP_PCI_MASTER = (1 << 2),
PCI_MASTER_EMPTY = (1 << 3),
GLOB_SFT_RST = (1 << 4),
- MV_PCI_MODE = 0xd00,
+ MV_PCI_MODE_OFS = 0xd00,
+ MV_PCI_MODE_MASK = 0x30,
+
MV_PCI_EXP_ROM_BAR_CTL = 0xd2c,
MV_PCI_DISC_TIMER = 0xd04,
MV_PCI_MSI_TRIGGER = 0xc38,
MV_PCI_SERR_MASK = 0xc28,
- MV_PCI_XBAR_TMOUT = 0x1d04,
+ MV_PCI_XBAR_TMOUT_OFS = 0x1d04,
MV_PCI_ERR_LOW_ADDRESS = 0x1d40,
MV_PCI_ERR_HIGH_ADDRESS = 0x1d44,
MV_PCI_ERR_ATTRIBUTE = 0x1d48,
MV_PCI_ERR_COMMAND = 0x1d50,
- PCI_IRQ_CAUSE_OFS = 0x1d58,
- PCI_IRQ_MASK_OFS = 0x1d5c,
+ PCI_IRQ_CAUSE_OFS = 0x1d58,
+ PCI_IRQ_MASK_OFS = 0x1d5c,
PCI_UNMASK_ALL_IRQS = 0x7fffff, /* bits 22-0 */
- HC_MAIN_IRQ_CAUSE_OFS = 0x1d60,
- HC_MAIN_IRQ_MASK_OFS = 0x1d64,
- PORT0_ERR = (1 << 0), /* shift by port # */
- PORT0_DONE = (1 << 1), /* shift by port # */
+ PCIE_IRQ_CAUSE_OFS = 0x1900,
+ PCIE_IRQ_MASK_OFS = 0x1910,
+ PCIE_UNMASK_ALL_IRQS = 0x40a, /* assorted bits */
+
+ /* Host Controller Main Interrupt Cause/Mask registers (1 per-chip) */
+ PCI_HC_MAIN_IRQ_CAUSE_OFS = 0x1d60,
+ PCI_HC_MAIN_IRQ_MASK_OFS = 0x1d64,
+ SOC_HC_MAIN_IRQ_CAUSE_OFS = 0x20020,
+ SOC_HC_MAIN_IRQ_MASK_OFS = 0x20024,
+ ERR_IRQ = (1 << 0), /* shift by port # */
+ DONE_IRQ = (1 << 1), /* shift by port # */
HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */
HC_SHIFT = 9, /* bits 9-17 = HC1's ports */
PCI_ERR = (1 << 18),
TWSI_INT = (1 << 24),
HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */
HC_MAIN_RSVD_5 = (0x1fff << 19), /* bits 31-19 */
+ HC_MAIN_RSVD_SOC = (0x3fffffb << 6), /* bits 31-9, 7-6 */
HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE |
+ PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE |
PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT |
HC_MAIN_RSVD),
HC_MAIN_MASKED_IRQS_5 = (PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE |
HC_MAIN_RSVD_5),
+ HC_MAIN_MASKED_IRQS_SOC = (PORTS_0_3_COAL_DONE | HC_MAIN_RSVD_SOC),
/* SATAHC registers */
HC_CFG_OFS = 0,
HC_IRQ_CAUSE_OFS = 0x14,
- CRPB_DMA_DONE = (1 << 0), /* shift by port # */
- HC_IRQ_COAL = (1 << 4), /* IRQ coalescing */
+ DMA_IRQ = (1 << 0), /* shift by port # */
+ HC_COAL_IRQ = (1 << 4), /* IRQ coalescing */
DEV_IRQ = (1 << 8), /* shift by port # */
/* Shadow block registers */
/* SATA registers */
SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */
SATA_ACTIVE_OFS = 0x350,
+ SATA_FIS_IRQ_CAUSE_OFS = 0x364,
+
+ LTMODE_OFS = 0x30c,
+ LTMODE_BIT8 = (1 << 8), /* unknown, but necessary */
+
PHY_MODE3 = 0x310,
PHY_MODE4 = 0x314,
PHY_MODE2 = 0x330,
+ SATA_IFCTL_OFS = 0x344,
+ SATA_TESTCTL_OFS = 0x348,
+ SATA_IFSTAT_OFS = 0x34c,
+ VENDOR_UNIQUE_FIS_OFS = 0x35c,
+
+ FISCFG_OFS = 0x360,
+ FISCFG_WAIT_DEV_ERR = (1 << 8), /* wait for host on DevErr */
+ FISCFG_SINGLE_SYNC = (1 << 16), /* SYNC on DMA activation */
+
MV5_PHY_MODE = 0x74,
- MV5_LT_MODE = 0x30,
- MV5_PHY_CTL = 0x0C,
- SATA_INTERFACE_CTL = 0x050,
+ MV5_LTMODE_OFS = 0x30,
+ MV5_PHY_CTL_OFS = 0x0C,
+ SATA_INTERFACE_CFG_OFS = 0x050,
MV_M2_PREAMP_MASK = 0x7e0,
/* Port registers */
EDMA_CFG_OFS = 0,
- EDMA_CFG_Q_DEPTH = 0, /* queueing disabled */
- EDMA_CFG_NCQ = (1 << 5),
- EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */
- EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */
- EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */
+ EDMA_CFG_Q_DEPTH = 0x1f, /* max device queue depth */
+ EDMA_CFG_NCQ = (1 << 5), /* for R/W FPDMA queued */
+ EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */
+ EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */
+ EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */
+ EDMA_CFG_EDMA_FBS = (1 << 16), /* EDMA FIS-Based Switching */
+ EDMA_CFG_FBS = (1 << 26), /* FIS-Based Switching */
EDMA_ERR_IRQ_CAUSE_OFS = 0x8,
EDMA_ERR_IRQ_MASK_OFS = 0xc,
- EDMA_ERR_D_PAR = (1 << 0),
- EDMA_ERR_PRD_PAR = (1 << 1),
- EDMA_ERR_DEV = (1 << 2),
- EDMA_ERR_DEV_DCON = (1 << 3),
- EDMA_ERR_DEV_CON = (1 << 4),
- EDMA_ERR_SERR = (1 << 5),
- EDMA_ERR_SELF_DIS = (1 << 7),
- EDMA_ERR_BIST_ASYNC = (1 << 8),
- EDMA_ERR_CRBQ_PAR = (1 << 9),
- EDMA_ERR_CRPB_PAR = (1 << 10),
- EDMA_ERR_INTRL_PAR = (1 << 11),
- EDMA_ERR_IORDY = (1 << 12),
- EDMA_ERR_LNK_CTRL_RX = (0xf << 13),
- EDMA_ERR_LNK_CTRL_RX_2 = (1 << 15),
- EDMA_ERR_LNK_DATA_RX = (0xf << 17),
- EDMA_ERR_LNK_CTRL_TX = (0x1f << 21),
- EDMA_ERR_LNK_DATA_TX = (0x1f << 26),
- EDMA_ERR_TRANS_PROTO = (1 << 31),
- EDMA_ERR_FATAL = (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR |
- EDMA_ERR_DEV_DCON | EDMA_ERR_CRBQ_PAR |
- EDMA_ERR_CRPB_PAR | EDMA_ERR_INTRL_PAR |
- EDMA_ERR_IORDY | EDMA_ERR_LNK_CTRL_RX_2 |
- EDMA_ERR_LNK_DATA_RX |
- EDMA_ERR_LNK_DATA_TX |
- EDMA_ERR_TRANS_PROTO),
+ EDMA_ERR_D_PAR = (1 << 0), /* UDMA data parity err */
+ EDMA_ERR_PRD_PAR = (1 << 1), /* UDMA PRD parity err */
+ EDMA_ERR_DEV = (1 << 2), /* device error */
+ EDMA_ERR_DEV_DCON = (1 << 3), /* device disconnect */
+ EDMA_ERR_DEV_CON = (1 << 4), /* device connected */
+ EDMA_ERR_SERR = (1 << 5), /* SError bits [WBDST] raised */
+ EDMA_ERR_SELF_DIS = (1 << 7), /* Gen II/IIE self-disable */
+ EDMA_ERR_SELF_DIS_5 = (1 << 8), /* Gen I self-disable */
+ EDMA_ERR_BIST_ASYNC = (1 << 8), /* BIST FIS or Async Notify */
+ EDMA_ERR_TRANS_IRQ_7 = (1 << 8), /* Gen IIE transprt layer irq */
+ EDMA_ERR_CRQB_PAR = (1 << 9), /* CRQB parity error */
+ EDMA_ERR_CRPB_PAR = (1 << 10), /* CRPB parity error */
+ EDMA_ERR_INTRL_PAR = (1 << 11), /* internal parity error */
+ EDMA_ERR_IORDY = (1 << 12), /* IORdy timeout */
+
+ EDMA_ERR_LNK_CTRL_RX = (0xf << 13), /* link ctrl rx error */
+ EDMA_ERR_LNK_CTRL_RX_0 = (1 << 13), /* transient: CRC err */
+ EDMA_ERR_LNK_CTRL_RX_1 = (1 << 14), /* transient: FIFO err */
+ EDMA_ERR_LNK_CTRL_RX_2 = (1 << 15), /* fatal: caught SYNC */
+ EDMA_ERR_LNK_CTRL_RX_3 = (1 << 16), /* transient: FIS rx err */
+
+ EDMA_ERR_LNK_DATA_RX = (0xf << 17), /* link data rx error */
+
+ EDMA_ERR_LNK_CTRL_TX = (0x1f << 21), /* link ctrl tx error */
+ EDMA_ERR_LNK_CTRL_TX_0 = (1 << 21), /* transient: CRC err */
+ EDMA_ERR_LNK_CTRL_TX_1 = (1 << 22), /* transient: FIFO err */
+ EDMA_ERR_LNK_CTRL_TX_2 = (1 << 23), /* transient: caught SYNC */
+ EDMA_ERR_LNK_CTRL_TX_3 = (1 << 24), /* transient: caught DMAT */
+ EDMA_ERR_LNK_CTRL_TX_4 = (1 << 25), /* transient: FIS collision */
+
+ EDMA_ERR_LNK_DATA_TX = (0x1f << 26), /* link data tx error */
+
+ EDMA_ERR_TRANS_PROTO = (1 << 31), /* transport protocol error */
+ EDMA_ERR_OVERRUN_5 = (1 << 5),
+ EDMA_ERR_UNDERRUN_5 = (1 << 6),
+
+ EDMA_ERR_IRQ_TRANSIENT = EDMA_ERR_LNK_CTRL_RX_0 |
+ EDMA_ERR_LNK_CTRL_RX_1 |
+ EDMA_ERR_LNK_CTRL_RX_3 |
+ EDMA_ERR_LNK_CTRL_TX,
+
+ EDMA_EH_FREEZE = EDMA_ERR_D_PAR |
+ EDMA_ERR_PRD_PAR |
+ EDMA_ERR_DEV_DCON |
+ EDMA_ERR_DEV_CON |
+ EDMA_ERR_SERR |
+ EDMA_ERR_SELF_DIS |
+ EDMA_ERR_CRQB_PAR |
+ EDMA_ERR_CRPB_PAR |
+ EDMA_ERR_INTRL_PAR |
+ EDMA_ERR_IORDY |
+ EDMA_ERR_LNK_CTRL_RX_2 |
+ EDMA_ERR_LNK_DATA_RX |
+ EDMA_ERR_LNK_DATA_TX |
+ EDMA_ERR_TRANS_PROTO,
+
+ EDMA_EH_FREEZE_5 = EDMA_ERR_D_PAR |
+ EDMA_ERR_PRD_PAR |
+ EDMA_ERR_DEV_DCON |
+ EDMA_ERR_DEV_CON |
+ EDMA_ERR_OVERRUN_5 |
+ EDMA_ERR_UNDERRUN_5 |
+ EDMA_ERR_SELF_DIS_5 |
+ EDMA_ERR_CRQB_PAR |
+ EDMA_ERR_CRPB_PAR |
+ EDMA_ERR_INTRL_PAR |
+ EDMA_ERR_IORDY,
EDMA_REQ_Q_BASE_HI_OFS = 0x10,
EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */
EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */
EDMA_RSP_Q_PTR_SHIFT = 3,
- EDMA_CMD_OFS = 0x28,
- EDMA_EN = (1 << 0),
- EDMA_DS = (1 << 1),
- ATA_RST = (1 << 2),
+ EDMA_CMD_OFS = 0x28, /* EDMA command register */
+ EDMA_EN = (1 << 0), /* enable EDMA */
+ EDMA_DS = (1 << 1), /* disable EDMA; self-negated */
+ EDMA_RESET = (1 << 2), /* reset eng/trans/link/phy */
- EDMA_IORDY_TMOUT = 0x34,
- EDMA_ARB_CFG = 0x38,
+ EDMA_STATUS_OFS = 0x30, /* EDMA engine status */
+ EDMA_STATUS_CACHE_EMPTY = (1 << 6), /* GenIIe command cache empty */
+ EDMA_STATUS_IDLE = (1 << 7), /* GenIIe EDMA enabled/idle */
+
+ EDMA_IORDY_TMOUT_OFS = 0x34,
+ EDMA_ARB_CFG_OFS = 0x38,
+
+ EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */
+
+ GEN_II_NCQ_MAX_SECTORS = 256, /* max sects/io on Gen2 w/NCQ */
/* Host private flags (hp_flags) */
MV_HP_FLAG_MSI = (1 << 0),
MV_HP_ERRATA_60X1B2 = (1 << 3),
MV_HP_ERRATA_60X1C0 = (1 << 4),
MV_HP_ERRATA_XX42A0 = (1 << 5),
- MV_HP_50XX = (1 << 6),
- MV_HP_GEN_IIE = (1 << 7),
+ MV_HP_GEN_I = (1 << 6), /* Generation I: 50xx */
+ MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */
+ MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */
+ MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */
+ MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */
/* Port private flags (pp_flags) */
- MV_PP_FLAG_EDMA_EN = (1 << 0),
- MV_PP_FLAG_EDMA_DS_ACT = (1 << 1),
+ MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
+ MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */
};
-#define IS_50XX(hpriv) ((hpriv)->hp_flags & MV_HP_50XX)
-#define IS_60XX(hpriv) (((hpriv)->hp_flags & MV_HP_50XX) == 0)
-#define IS_GEN_I(hpriv) IS_50XX(hpriv)
-#define IS_GEN_II(hpriv) IS_60XX(hpriv)
+#define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I)
+#define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II)
#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
+#define IS_PCIE(hpriv) ((hpriv)->hp_flags & MV_HP_PCIE)
+#define HAS_PCI(host) (!((host)->ports[0]->flags & MV_FLAG_SOC))
+
+#define WINDOW_CTRL(i) (0x20030 + ((i) << 4))
+#define WINDOW_BASE(i) (0x20034 + ((i) << 4))
enum {
- MV_DMA_BOUNDARY = 0xffffffffU,
+ /* DMA boundary 0xffff is required by the s/g splitting
+ * we need on /length/ in mv_fill-sg().
+ */
+ MV_DMA_BOUNDARY = 0xffffU,
+ /* mask of register bits containing lower 32 bits
+ * of EDMA request queue DMA address
+ */
EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U,
+ /* ditto, for response queue */
EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U,
};
chip_608x,
chip_6042,
chip_7042,
+ chip_soc,
};
/* Command ReQuest Block: 32B */
dma_addr_t crqb_dma;
struct mv_crpb *crpb;
dma_addr_t crpb_dma;
- struct mv_sg *sg_tbl;
- dma_addr_t sg_tbl_dma;
+ struct mv_sg *sg_tbl[MV_MAX_Q_DEPTH];
+ dma_addr_t sg_tbl_dma[MV_MAX_Q_DEPTH];
+
+ unsigned int req_idx;
+ unsigned int resp_idx;
+
u32 pp_flags;
};
u32 pre;
};
-struct mv_host_priv;
+struct mv_host_priv {
+ u32 hp_flags;
+ struct mv_port_signal signal[8];
+ const struct mv_hw_ops *ops;
+ int n_ports;
+ void __iomem *base;
+ void __iomem *main_irq_cause_addr;
+ void __iomem *main_irq_mask_addr;
+ u32 irq_cause_ofs;
+ u32 irq_mask_ofs;
+ u32 unmask_all_irqs;
+ /*
+ * These consistent DMA memory pools give us guaranteed
+ * alignment for hardware-accessed data structures,
+ * and less memory waste in accomplishing the alignment.
+ */
+ struct dma_pool *crqb_pool;
+ struct dma_pool *crpb_pool;
+ struct dma_pool *sg_tbl_pool;
+};
+
struct mv_hw_ops {
void (*phy_errata)(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port);
int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int n_hc);
void (*reset_flash)(struct mv_host_priv *hpriv, void __iomem *mmio);
- void (*reset_bus)(struct pci_dev *pdev, void __iomem *mmio);
-};
-
-struct mv_host_priv {
- u32 hp_flags;
- struct mv_port_signal signal[8];
- const struct mv_hw_ops *ops;
+ void (*reset_bus)(struct ata_host *host, void __iomem *mmio);
};
-static void mv_irq_clear(struct ata_port *ap);
-static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in);
-static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
-static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in);
-static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
-static void mv_phy_reset(struct ata_port *ap);
-static void __mv_phy_reset(struct ata_port *ap, int can_sleep);
+static int mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val);
+static int mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
+static int mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val);
+static int mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
static int mv_port_start(struct ata_port *ap);
static void mv_port_stop(struct ata_port *ap);
static void mv_qc_prep(struct ata_queued_cmd *qc);
static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
-static void mv_eng_timeout(struct ata_port *ap);
-static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+static int mv_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static void mv_eh_freeze(struct ata_port *ap);
+static void mv_eh_thaw(struct ata_port *ap);
+static void mv6_dev_config(struct ata_device *dev);
static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port);
static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int n_hc);
static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
-static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio);
+static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio);
static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port);
static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int n_hc);
static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
-static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio);
-static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
+static void mv_soc_enable_leds(struct mv_host_priv *hpriv,
+ void __iomem *mmio);
+static void mv_soc_read_preamp(struct mv_host_priv *hpriv, int idx,
+ void __iomem *mmio);
+static int mv_soc_reset_hc(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int n_hc);
+static void mv_soc_reset_flash(struct mv_host_priv *hpriv,
+ void __iomem *mmio);
+static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio);
+static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio);
+static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port_no);
-static void mv_stop_and_reset(struct ata_port *ap);
-
-static struct scsi_host_template mv_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = MV_USE_Q_DEPTH,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = MV_MAX_SG_CT,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = 1,
- .proc_name = DRV_NAME,
+static int mv_stop_edma(struct ata_port *ap);
+static int mv_stop_edma_engine(void __iomem *port_mmio);
+static void mv_edma_cfg(struct ata_port *ap, int want_ncq);
+
+static void mv_pmp_select(struct ata_port *ap, int pmp);
+static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static int mv_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+
+/* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below
+ * because we have to allow room for worst case splitting of
+ * PRDs for 64K boundaries in mv_fill_sg().
+ */
+static struct scsi_host_template mv5_sht = {
+ ATA_BASE_SHT(DRV_NAME),
+ .sg_tablesize = MV_MAX_SG_CT / 2,
.dma_boundary = MV_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
};
-static const struct ata_port_operations mv5_ops = {
- .port_disable = ata_port_disable,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
+static struct scsi_host_template mv6_sht = {
+ ATA_NCQ_SHT(DRV_NAME),
+ .can_queue = MV_MAX_Q_DEPTH - 1,
+ .sg_tablesize = MV_MAX_SG_CT / 2,
+ .dma_boundary = MV_DMA_BOUNDARY,
+};
- .phy_reset = mv_phy_reset,
- .cable_detect = ata_cable_sata,
+static struct ata_port_operations mv5_ops = {
+ .inherits = &ata_sff_port_ops,
.qc_prep = mv_qc_prep,
.qc_issue = mv_qc_issue,
- .data_xfer = ata_data_xfer,
-
- .eng_timeout = mv_eng_timeout,
- .irq_clear = mv_irq_clear,
- .irq_on = ata_irq_on,
- .irq_ack = ata_irq_ack,
+ .freeze = mv_eh_freeze,
+ .thaw = mv_eh_thaw,
+ .hardreset = mv_hardreset,
+ .error_handler = ata_std_error_handler, /* avoid SFF EH */
+ .post_internal_cmd = ATA_OP_NULL,
.scr_read = mv5_scr_read,
.scr_write = mv5_scr_write,
.port_stop = mv_port_stop,
};
-static const struct ata_port_operations mv6_ops = {
- .port_disable = ata_port_disable,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .phy_reset = mv_phy_reset,
- .cable_detect = ata_cable_sata,
-
- .qc_prep = mv_qc_prep,
- .qc_issue = mv_qc_issue,
- .data_xfer = ata_data_xfer,
-
- .eng_timeout = mv_eng_timeout,
-
- .irq_clear = mv_irq_clear,
- .irq_on = ata_irq_on,
- .irq_ack = ata_irq_ack,
-
+static struct ata_port_operations mv6_ops = {
+ .inherits = &mv5_ops,
+ .qc_defer = sata_pmp_qc_defer_cmd_switch,
+ .dev_config = mv6_dev_config,
.scr_read = mv_scr_read,
.scr_write = mv_scr_write,
- .port_start = mv_port_start,
- .port_stop = mv_port_stop,
+ .pmp_hardreset = mv_pmp_hardreset,
+ .pmp_softreset = mv_softreset,
+ .softreset = mv_softreset,
+ .error_handler = sata_pmp_error_handler,
};
-static const struct ata_port_operations mv_iie_ops = {
- .port_disable = ata_port_disable,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .phy_reset = mv_phy_reset,
- .cable_detect = ata_cable_sata,
-
+static struct ata_port_operations mv_iie_ops = {
+ .inherits = &mv6_ops,
+ .qc_defer = ata_std_qc_defer, /* FIS-based switching */
+ .dev_config = ATA_OP_NULL,
.qc_prep = mv_qc_prep_iie,
- .qc_issue = mv_qc_issue,
- .data_xfer = ata_data_xfer,
-
- .eng_timeout = mv_eng_timeout,
-
- .irq_clear = mv_irq_clear,
- .irq_on = ata_irq_on,
- .irq_ack = ata_irq_ack,
-
- .scr_read = mv_scr_read,
- .scr_write = mv_scr_write,
-
- .port_start = mv_port_start,
- .port_stop = mv_port_stop,
};
static const struct ata_port_info mv_port_info[] = {
{ /* chip_504x */
.flags = MV_COMMON_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
- .udma_mask = 0x7f, /* udma0-6 */
+ .udma_mask = ATA_UDMA6,
.port_ops = &mv5_ops,
},
{ /* chip_508x */
- .flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC),
+ .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC,
.pio_mask = 0x1f, /* pio0-4 */
- .udma_mask = 0x7f, /* udma0-6 */
+ .udma_mask = ATA_UDMA6,
.port_ops = &mv5_ops,
},
{ /* chip_5080 */
- .flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC),
+ .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC,
.pio_mask = 0x1f, /* pio0-4 */
- .udma_mask = 0x7f, /* udma0-6 */
+ .udma_mask = ATA_UDMA6,
.port_ops = &mv5_ops,
},
{ /* chip_604x */
- .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
+ .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
+ ATA_FLAG_NCQ,
.pio_mask = 0x1f, /* pio0-4 */
- .udma_mask = 0x7f, /* udma0-6 */
+ .udma_mask = ATA_UDMA6,
.port_ops = &mv6_ops,
},
{ /* chip_608x */
- .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS |
- MV_FLAG_DUAL_HC),
+ .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
+ ATA_FLAG_NCQ | MV_FLAG_DUAL_HC,
.pio_mask = 0x1f, /* pio0-4 */
- .udma_mask = 0x7f, /* udma0-6 */
+ .udma_mask = ATA_UDMA6,
.port_ops = &mv6_ops,
},
{ /* chip_6042 */
- .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
+ .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
+ ATA_FLAG_NCQ,
.pio_mask = 0x1f, /* pio0-4 */
- .udma_mask = 0x7f, /* udma0-6 */
+ .udma_mask = ATA_UDMA6,
.port_ops = &mv_iie_ops,
},
{ /* chip_7042 */
- .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
+ .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
+ ATA_FLAG_NCQ,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &mv_iie_ops,
+ },
+ { /* chip_soc */
+ .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
+ ATA_FLAG_NCQ | MV_FLAG_SOC,
.pio_mask = 0x1f, /* pio0-4 */
- .udma_mask = 0x7f, /* udma0-6 */
+ .udma_mask = ATA_UDMA6,
.port_ops = &mv_iie_ops,
},
};
{ PCI_VDEVICE(MARVELL, 0x5041), chip_504x },
{ PCI_VDEVICE(MARVELL, 0x5080), chip_5080 },
{ PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
+ /* RocketRAID 1740/174x have different identifiers */
+ { PCI_VDEVICE(TTI, 0x1740), chip_508x },
+ { PCI_VDEVICE(TTI, 0x1742), chip_508x },
{ PCI_VDEVICE(MARVELL, 0x6040), chip_604x },
{ PCI_VDEVICE(MARVELL, 0x6041), chip_604x },
{ PCI_VDEVICE(ADAPTEC2, 0x0241), chip_604x },
- { PCI_VDEVICE(TTI, 0x2310), chip_7042 },
+ /* Adaptec 1430SA */
+ { PCI_VDEVICE(ADAPTEC2, 0x0243), chip_7042 },
- /* add Marvell 7042 support */
+ /* Marvell 7042 support */
{ PCI_VDEVICE(MARVELL, 0x7042), chip_7042 },
- { } /* terminate list */
-};
+ /* Highpoint RocketRAID PCIe series */
+ { PCI_VDEVICE(TTI, 0x2300), chip_7042 },
+ { PCI_VDEVICE(TTI, 0x2310), chip_7042 },
-static struct pci_driver mv_pci_driver = {
- .name = DRV_NAME,
- .id_table = mv_pci_tbl,
- .probe = mv_init_one,
- .remove = ata_pci_remove_one,
+ { } /* terminate list */
};
static const struct mv_hw_ops mv5xxx_ops = {
.reset_bus = mv_reset_pci_bus,
};
-/*
- * module options
- */
-static int msi; /* Use PCI msi; either zero (off, default) or non-zero */
-
-
-/* move to PCI layer or libata core? */
-static int pci_go_64(struct pci_dev *pdev)
-{
- int rc;
-
- if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
- if (rc) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "64-bit DMA enable failed\n");
- return rc;
- }
- }
- } else {
- rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "32-bit DMA enable failed\n");
- return rc;
- }
- rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "32-bit consistent DMA enable failed\n");
- return rc;
- }
- }
-
- return rc;
-}
+static const struct mv_hw_ops mv_soc_ops = {
+ .phy_errata = mv6_phy_errata,
+ .enable_leds = mv_soc_enable_leds,
+ .read_preamp = mv_soc_read_preamp,
+ .reset_hc = mv_soc_reset_hc,
+ .reset_flash = mv_soc_reset_flash,
+ .reset_bus = mv_soc_reset_bus,
+};
/*
* Functions
(void) readl(addr); /* flush to avoid PCI posted write */
}
-static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc)
-{
- return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ));
-}
-
static inline unsigned int mv_hc_from_port(unsigned int port)
{
return port >> MV_PORT_HC_SHIFT;
return port & MV_PORT_MASK;
}
+/*
+ * Consolidate some rather tricky bit shift calculations.
+ * This is hot-path stuff, so not a function.
+ * Simple code, with two return values, so macro rather than inline.
+ *
+ * port is the sole input, in range 0..7.
+ * shift is one output, for use with main_irq_cause / main_irq_mask registers.
+ * hardport is the other output, in range 0..3.
+ *
+ * Note that port and hardport may be the same variable in some cases.
+ */
+#define MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport) \
+{ \
+ shift = mv_hc_from_port(port) * HC_SHIFT; \
+ hardport = mv_hardport_from_port(port); \
+ shift += hardport * 2; \
+}
+
+static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc)
+{
+ return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ));
+}
+
static inline void __iomem *mv_hc_base_from_port(void __iomem *base,
unsigned int port)
{
(mv_hardport_from_port(port) * MV_PORT_REG_SZ);
}
+static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port)
+{
+ void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port);
+ unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL;
+
+ return hc_mmio + ofs;
+}
+
+static inline void __iomem *mv_host_base(struct ata_host *host)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ return hpriv->base;
+}
+
static inline void __iomem *mv_ap_base(struct ata_port *ap)
{
- return mv_port_base(ap->host->iomap[MV_PRIMARY_BAR], ap->port_no);
+ return mv_port_base(mv_host_base(ap->host), ap->port_no);
}
static inline int mv_get_hc_count(unsigned long port_flags)
return ((port_flags & MV_FLAG_DUAL_HC) ? 2 : 1);
}
-static void mv_irq_clear(struct ata_port *ap)
+static void mv_set_edma_ptrs(void __iomem *port_mmio,
+ struct mv_host_priv *hpriv,
+ struct mv_port_priv *pp)
{
+ u32 index;
+
+ /*
+ * initialize request queue
+ */
+ pp->req_idx &= MV_MAX_Q_DEPTH_MASK; /* paranoia */
+ index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT;
+
+ WARN_ON(pp->crqb_dma & 0x3ff);
+ writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
+ writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index,
+ port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+
+ if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
+ writelfl((pp->crqb_dma & 0xffffffff) | index,
+ port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+ else
+ writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+
+ /*
+ * initialize response queue
+ */
+ pp->resp_idx &= MV_MAX_Q_DEPTH_MASK; /* paranoia */
+ index = pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT;
+
+ WARN_ON(pp->crpb_dma & 0xff);
+ writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
+
+ if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
+ writelfl((pp->crpb_dma & 0xffffffff) | index,
+ port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+ else
+ writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+
+ writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index,
+ port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
}
/**
* LOCKING:
* Inherited from caller.
*/
-static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp)
+static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
+ struct mv_port_priv *pp, u8 protocol)
{
- if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) {
- writelfl(EDMA_EN, base + EDMA_CMD_OFS);
+ int want_ncq = (protocol == ATA_PROT_NCQ);
+
+ if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
+ int using_ncq = ((pp->pp_flags & MV_PP_FLAG_NCQ_EN) != 0);
+ if (want_ncq != using_ncq)
+ mv_stop_edma(ap);
+ }
+ if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) {
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ int hardport = mv_hardport_from_port(ap->port_no);
+ void __iomem *hc_mmio = mv_hc_base_from_port(
+ mv_host_base(ap->host), hardport);
+ u32 hc_irq_cause, ipending;
+
+ /* clear EDMA event indicators, if any */
+ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+
+ /* clear EDMA interrupt indicator, if any */
+ hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
+ ipending = (DEV_IRQ | DMA_IRQ) << hardport;
+ if (hc_irq_cause & ipending) {
+ writelfl(hc_irq_cause & ~ipending,
+ hc_mmio + HC_IRQ_CAUSE_OFS);
+ }
+
+ mv_edma_cfg(ap, want_ncq);
+
+ /* clear FIS IRQ Cause */
+ writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
+
+ mv_set_edma_ptrs(port_mmio, hpriv, pp);
+
+ writelfl(EDMA_EN, port_mmio + EDMA_CMD_OFS);
pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
}
- WARN_ON(!(EDMA_EN & readl(base + EDMA_CMD_OFS)));
}
/**
- * mv_stop_dma - Disable eDMA engine
- * @ap: ATA channel to manipulate
- *
- * Verify the local cache of the eDMA state is accurate with a
- * WARN_ON.
+ * mv_stop_edma_engine - Disable eDMA engine
+ * @port_mmio: io base address
*
* LOCKING:
* Inherited from caller.
*/
-static void mv_stop_dma(struct ata_port *ap)
+static int mv_stop_edma_engine(void __iomem *port_mmio)
{
- void __iomem *port_mmio = mv_ap_base(ap);
- struct mv_port_priv *pp = ap->private_data;
- u32 reg;
int i;
- if (MV_PP_FLAG_EDMA_EN & pp->pp_flags) {
- /* Disable EDMA if active. The disable bit auto clears.
- */
- writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
- pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
- } else {
- WARN_ON(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS));
- }
+ /* Disable eDMA. The disable bit auto clears. */
+ writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
- /* now properly wait for the eDMA to stop */
- for (i = 1000; i > 0; i--) {
- reg = readl(port_mmio + EDMA_CMD_OFS);
- if (!(EDMA_EN & reg)) {
- break;
- }
- udelay(100);
+ /* Wait for the chip to confirm eDMA is off. */
+ for (i = 10000; i > 0; i--) {
+ u32 reg = readl(port_mmio + EDMA_CMD_OFS);
+ if (!(reg & EDMA_EN))
+ return 0;
+ udelay(10);
}
+ return -EIO;
+}
+
+static int mv_stop_edma(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ struct mv_port_priv *pp = ap->private_data;
- if (EDMA_EN & reg) {
+ if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN))
+ return 0;
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ if (mv_stop_edma_engine(port_mmio)) {
ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n");
- /* FIXME: Consider doing a reset here to recover */
+ return -EIO;
}
+ return 0;
}
#ifdef ATA_DEBUG
for (b = 0; b < bytes; ) {
DPRINTK("%p: ", start + b);
for (w = 0; b < bytes && w < 4; w++) {
- printk("%08x ",readl(start + b));
+ printk("%08x ", readl(start + b));
b += sizeof(u32);
}
printk("\n");
for (b = 0; b < bytes; ) {
DPRINTK("%02x: ", b);
for (w = 0; b < bytes && w < 4; w++) {
- (void) pci_read_config_dword(pdev,b,&dw);
- printk("%08x ",dw);
+ (void) pci_read_config_dword(pdev, b, &dw);
+ printk("%08x ", dw);
b += sizeof(u32);
}
printk("\n");
}
for (p = start_port; p < start_port + num_ports; p++) {
port_base = mv_port_base(mmio_base, p);
- DPRINTK("EDMA regs (port %i):\n",p);
+ DPRINTK("EDMA regs (port %i):\n", p);
mv_dump_mem(port_base, 0x54);
- DPRINTK("SATA regs (port %i):\n",p);
+ DPRINTK("SATA regs (port %i):\n", p);
mv_dump_mem(port_base+0x300, 0x60);
}
#endif
return ofs;
}
-static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in)
+static int mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val)
{
unsigned int ofs = mv_scr_offset(sc_reg_in);
- if (0xffffffffU != ofs)
- return readl(mv_ap_base(ap) + ofs);
- else
- return (u32) ofs;
+ if (ofs != 0xffffffffU) {
+ *val = readl(mv_ap_base(ap) + ofs);
+ return 0;
+ } else
+ return -EINVAL;
}
-static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
+static int mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
{
unsigned int ofs = mv_scr_offset(sc_reg_in);
- if (0xffffffffU != ofs)
+ if (ofs != 0xffffffffU) {
writelfl(val, mv_ap_base(ap) + ofs);
+ return 0;
+ } else
+ return -EINVAL;
+}
+
+static void mv6_dev_config(struct ata_device *adev)
+{
+ /*
+ * Deal with Gen-II ("mv6") hardware quirks/restrictions:
+ *
+ * Gen-II does not support NCQ over a port multiplier
+ * (no FIS-based switching).
+ *
+ * We don't have hob_nsect when doing NCQ commands on Gen-II.
+ * See mv_qc_prep() for more info.
+ */
+ if (adev->flags & ATA_DFLAG_NCQ) {
+ if (sata_pmp_attached(adev->link->ap)) {
+ adev->flags &= ~ATA_DFLAG_NCQ;
+ ata_dev_printk(adev, KERN_INFO,
+ "NCQ disabled for command-based switching\n");
+ } else if (adev->max_sectors > GEN_II_NCQ_MAX_SECTORS) {
+ adev->max_sectors = GEN_II_NCQ_MAX_SECTORS;
+ ata_dev_printk(adev, KERN_INFO,
+ "max_sectors limited to %u for NCQ\n",
+ adev->max_sectors);
+ }
+ }
+}
+
+static void mv_config_fbs(void __iomem *port_mmio, int enable_fbs)
+{
+ u32 old_fiscfg, new_fiscfg, old_ltmode, new_ltmode;
+ /*
+ * Various bit settings required for operation
+ * in FIS-based switching (fbs) mode on GenIIe:
+ */
+ old_fiscfg = readl(port_mmio + FISCFG_OFS);
+ old_ltmode = readl(port_mmio + LTMODE_OFS);
+ if (enable_fbs) {
+ new_fiscfg = old_fiscfg | FISCFG_SINGLE_SYNC;
+ new_ltmode = old_ltmode | LTMODE_BIT8;
+ } else { /* disable fbs */
+ new_fiscfg = old_fiscfg & ~FISCFG_SINGLE_SYNC;
+ new_ltmode = old_ltmode & ~LTMODE_BIT8;
+ }
+ if (new_fiscfg != old_fiscfg)
+ writelfl(new_fiscfg, port_mmio + FISCFG_OFS);
+ if (new_ltmode != old_ltmode)
+ writelfl(new_ltmode, port_mmio + LTMODE_OFS);
}
-static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio)
+static void mv_edma_cfg(struct ata_port *ap, int want_ncq)
{
- u32 cfg = readl(port_mmio + EDMA_CFG_OFS);
+ u32 cfg;
+ struct mv_port_priv *pp = ap->private_data;
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = mv_ap_base(ap);
/* set up non-NCQ EDMA configuration */
- cfg &= ~(1 << 9); /* disable equeue */
+ cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */
- if (IS_GEN_I(hpriv)) {
- cfg &= ~0x1f; /* clear queue depth */
+ if (IS_GEN_I(hpriv))
cfg |= (1 << 8); /* enab config burst size mask */
- }
- else if (IS_GEN_II(hpriv)) {
- cfg &= ~0x1f; /* clear queue depth */
+ else if (IS_GEN_II(hpriv))
cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN;
- cfg &= ~(EDMA_CFG_NCQ | EDMA_CFG_NCQ_GO_ON_ERR); /* clear NCQ */
- }
else if (IS_GEN_IIE(hpriv)) {
cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */
cfg |= (1 << 22); /* enab 4-entry host queue cache */
- cfg &= ~(1 << 19); /* dis 128-entry queue (for now?) */
- cfg |= (1 << 18); /* enab early completion */
- cfg |= (1 << 17); /* enab cut-through (dis stor&forwrd) */
- cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */
- cfg &= ~(EDMA_CFG_NCQ | EDMA_CFG_NCQ_GO_ON_ERR); /* clear NCQ */
+ if (HAS_PCI(ap->host))
+ cfg |= (1 << 18); /* enab early completion */
+ if (hpriv->hp_flags & MV_HP_CUT_THROUGH)
+ cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */
+
+ if (want_ncq && sata_pmp_attached(ap)) {
+ cfg |= EDMA_CFG_EDMA_FBS; /* FIS-based switching */
+ mv_config_fbs(port_mmio, 1);
+ } else {
+ mv_config_fbs(port_mmio, 0);
+ }
}
+ if (want_ncq) {
+ cfg |= EDMA_CFG_NCQ;
+ pp->pp_flags |= MV_PP_FLAG_NCQ_EN;
+ } else
+ pp->pp_flags &= ~MV_PP_FLAG_NCQ_EN;
+
writelfl(cfg, port_mmio + EDMA_CFG_OFS);
}
+static void mv_port_free_dma_mem(struct ata_port *ap)
+{
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ struct mv_port_priv *pp = ap->private_data;
+ int tag;
+
+ if (pp->crqb) {
+ dma_pool_free(hpriv->crqb_pool, pp->crqb, pp->crqb_dma);
+ pp->crqb = NULL;
+ }
+ if (pp->crpb) {
+ dma_pool_free(hpriv->crpb_pool, pp->crpb, pp->crpb_dma);
+ pp->crpb = NULL;
+ }
+ /*
+ * For GEN_I, there's no NCQ, so we have only a single sg_tbl.
+ * For later hardware, we have one unique sg_tbl per NCQ tag.
+ */
+ for (tag = 0; tag < MV_MAX_Q_DEPTH; ++tag) {
+ if (pp->sg_tbl[tag]) {
+ if (tag == 0 || !IS_GEN_I(hpriv))
+ dma_pool_free(hpriv->sg_tbl_pool,
+ pp->sg_tbl[tag],
+ pp->sg_tbl_dma[tag]);
+ pp->sg_tbl[tag] = NULL;
+ }
+ }
+}
+
/**
* mv_port_start - Port specific init/start routine.
* @ap: ATA channel to manipulate
struct device *dev = ap->host->dev;
struct mv_host_priv *hpriv = ap->host->private_data;
struct mv_port_priv *pp;
- void __iomem *port_mmio = mv_ap_base(ap);
- void *mem;
- dma_addr_t mem_dma;
- int rc;
+ int tag;
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
return -ENOMEM;
+ ap->private_data = pp;
- mem = dmam_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma,
- GFP_KERNEL);
- if (!mem)
+ pp->crqb = dma_pool_alloc(hpriv->crqb_pool, GFP_KERNEL, &pp->crqb_dma);
+ if (!pp->crqb)
return -ENOMEM;
- memset(mem, 0, MV_PORT_PRIV_DMA_SZ);
-
- rc = ata_pad_alloc(ap, dev);
- if (rc)
- return rc;
-
- /* First item in chunk of DMA memory:
- * 32-slot command request table (CRQB), 32 bytes each in size
- */
- pp->crqb = mem;
- pp->crqb_dma = mem_dma;
- mem += MV_CRQB_Q_SZ;
- mem_dma += MV_CRQB_Q_SZ;
-
- /* Second item:
- * 32-slot command response table (CRPB), 8 bytes each in size
- */
- pp->crpb = mem;
- pp->crpb_dma = mem_dma;
- mem += MV_CRPB_Q_SZ;
- mem_dma += MV_CRPB_Q_SZ;
-
- /* Third item:
- * Table of scatter-gather descriptors (ePRD), 16 bytes each
- */
- pp->sg_tbl = mem;
- pp->sg_tbl_dma = mem_dma;
-
- mv_edma_cfg(hpriv, port_mmio);
-
- writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
- writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK,
- port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+ memset(pp->crqb, 0, MV_CRQB_Q_SZ);
- if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
- writelfl(pp->crqb_dma & 0xffffffff,
- port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
- else
- writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
-
- writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
-
- if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
- writelfl(pp->crpb_dma & 0xffffffff,
- port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
- else
- writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
-
- writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
- port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+ pp->crpb = dma_pool_alloc(hpriv->crpb_pool, GFP_KERNEL, &pp->crpb_dma);
+ if (!pp->crpb)
+ goto out_port_free_dma_mem;
+ memset(pp->crpb, 0, MV_CRPB_Q_SZ);
- /* Don't turn on EDMA here...do it before DMA commands only. Else
- * we'll be unable to send non-data, PIO, etc due to restricted access
- * to shadow regs.
+ /*
+ * For GEN_I, there's no NCQ, so we only allocate a single sg_tbl.
+ * For later hardware, we need one unique sg_tbl per NCQ tag.
*/
- ap->private_data = pp;
+ for (tag = 0; tag < MV_MAX_Q_DEPTH; ++tag) {
+ if (tag == 0 || !IS_GEN_I(hpriv)) {
+ pp->sg_tbl[tag] = dma_pool_alloc(hpriv->sg_tbl_pool,
+ GFP_KERNEL, &pp->sg_tbl_dma[tag]);
+ if (!pp->sg_tbl[tag])
+ goto out_port_free_dma_mem;
+ } else {
+ pp->sg_tbl[tag] = pp->sg_tbl[0];
+ pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0];
+ }
+ }
return 0;
+
+out_port_free_dma_mem:
+ mv_port_free_dma_mem(ap);
+ return -ENOMEM;
}
/**
*/
static void mv_port_stop(struct ata_port *ap)
{
- unsigned long flags;
-
- spin_lock_irqsave(&ap->host->lock, flags);
- mv_stop_dma(ap);
- spin_unlock_irqrestore(&ap->host->lock, flags);
+ mv_stop_edma(ap);
+ mv_port_free_dma_mem(ap);
}
/**
* LOCKING:
* Inherited from caller.
*/
-static unsigned int mv_fill_sg(struct ata_queued_cmd *qc)
+static void mv_fill_sg(struct ata_queued_cmd *qc)
{
struct mv_port_priv *pp = qc->ap->private_data;
- unsigned int n_sg = 0;
struct scatterlist *sg;
- struct mv_sg *mv_sg;
+ struct mv_sg *mv_sg, *last_sg = NULL;
+ unsigned int si;
- mv_sg = pp->sg_tbl;
- ata_for_each_sg(sg, qc) {
+ mv_sg = pp->sg_tbl[qc->tag];
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
dma_addr_t addr = sg_dma_address(sg);
u32 sg_len = sg_dma_len(sg);
- mv_sg->addr = cpu_to_le32(addr & 0xffffffff);
- mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
- mv_sg->flags_size = cpu_to_le32(sg_len & 0xffff);
+ while (sg_len) {
+ u32 offset = addr & 0xffff;
+ u32 len = sg_len;
- if (ata_sg_is_last(sg, qc))
- mv_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
+ if ((offset + sg_len > 0x10000))
+ len = 0x10000 - offset;
- mv_sg++;
- n_sg++;
- }
+ mv_sg->addr = cpu_to_le32(addr & 0xffffffff);
+ mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
+ mv_sg->flags_size = cpu_to_le32(len & 0xffff);
- return n_sg;
-}
+ sg_len -= len;
+ addr += len;
-static inline unsigned mv_inc_q_index(unsigned index)
-{
- return (index + 1) & MV_MAX_Q_DEPTH_MASK;
+ last_sg = mv_sg;
+ mv_sg++;
+ }
+ }
+
+ if (likely(last_sg))
+ last_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
}
-static inline void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last)
+static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last)
{
u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
(last ? CRQB_CMD_LAST : 0);
u16 flags = 0;
unsigned in_index;
- if (ATA_PROT_DMA != qc->tf.protocol)
+ if ((qc->tf.protocol != ATA_PROT_DMA) &&
+ (qc->tf.protocol != ATA_PROT_NCQ))
return;
/* Fill in command request block
flags |= CRQB_FLAG_READ;
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
+ flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT;
- /* get current queue index from hardware */
- in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
- >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+ /* get current queue index from software */
+ in_index = pp->req_idx;
pp->crqb[in_index].sg_addr =
- cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
+ cpu_to_le32(pp->sg_tbl_dma[qc->tag] & 0xffffffff);
pp->crqb[in_index].sg_addr_hi =
- cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
+ cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16);
pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags);
cw = &pp->crqb[in_index].ata_cmd[0];
case ATA_CMD_WRITE_FUA_EXT:
mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0);
break;
-#ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */
case ATA_CMD_FPDMA_READ:
case ATA_CMD_FPDMA_WRITE:
mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0);
mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0);
break;
-#endif /* FIXME: remove this line when NCQ added */
default:
/* The only other commands EDMA supports in non-queued and
* non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none
unsigned in_index;
u32 flags = 0;
- if (ATA_PROT_DMA != qc->tf.protocol)
+ if ((qc->tf.protocol != ATA_PROT_DMA) &&
+ (qc->tf.protocol != ATA_PROT_NCQ))
return;
- /* Fill in Gen IIE command request block
- */
+ /* Fill in Gen IIE command request block */
if (!(qc->tf.flags & ATA_TFLAG_WRITE))
flags |= CRQB_FLAG_READ;
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
+ flags |= qc->tag << CRQB_HOSTQ_SHIFT;
+ flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT;
- /* get current queue index from hardware */
- in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
- >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+ /* get current queue index from software */
+ in_index = pp->req_idx;
crqb = (struct mv_crqb_iie *) &pp->crqb[in_index];
- crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
- crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
+ crqb->addr = cpu_to_le32(pp->sg_tbl_dma[qc->tag] & 0xffffffff);
+ crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16);
crqb->flags = cpu_to_le32(flags);
tf = &qc->tf;
*/
static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
{
- void __iomem *port_mmio = mv_ap_base(qc->ap);
- struct mv_port_priv *pp = qc->ap->private_data;
- unsigned in_index;
- u32 in_ptr;
+ struct ata_port *ap = qc->ap;
+ void __iomem *port_mmio = mv_ap_base(ap);
+ struct mv_port_priv *pp = ap->private_data;
+ u32 in_index;
- if (ATA_PROT_DMA != qc->tf.protocol) {
- /* We're about to send a non-EDMA capable command to the
+ if ((qc->tf.protocol != ATA_PROT_DMA) &&
+ (qc->tf.protocol != ATA_PROT_NCQ)) {
+ /*
+ * We're about to send a non-EDMA capable command to the
* port. Turn off EDMA so there won't be problems accessing
* shadow block, etc registers.
*/
- mv_stop_dma(qc->ap);
- return ata_qc_issue_prot(qc);
+ mv_stop_edma(ap);
+ mv_pmp_select(ap, qc->dev->link->pmp);
+ return ata_sff_qc_issue(qc);
}
- in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
- in_index = (in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+ mv_start_dma(ap, port_mmio, pp, qc->tf.protocol);
- /* until we do queuing, the queue should be empty at this point */
- WARN_ON(in_index != ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS)
- >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
-
- in_index = mv_inc_q_index(in_index); /* now incr producer index */
-
- mv_start_dma(port_mmio, pp);
+ pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK;
+ in_index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT;
/* and write the request in pointer to kick the EDMA to life */
- in_ptr &= EDMA_REQ_Q_BASE_LO_MASK;
- in_ptr |= in_index << EDMA_REQ_Q_PTR_SHIFT;
- writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+ writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index,
+ port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
return 0;
}
-/**
- * mv_get_crpb_status - get status from most recently completed cmd
- * @ap: ATA channel to manipulate
- *
- * This routine is for use when the port is in DMA mode, when it
- * will be using the CRPB (command response block) method of
- * returning command completion information. We check indices
- * are good, grab status, and bump the response consumer index to
- * prove that we're up to date.
- *
- * LOCKING:
- * Inherited from caller.
- */
-static u8 mv_get_crpb_status(struct ata_port *ap)
+static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap)
{
- void __iomem *port_mmio = mv_ap_base(ap);
struct mv_port_priv *pp = ap->private_data;
- unsigned out_index;
- u32 out_ptr;
- u8 ata_status;
-
- out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
- out_index = (out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
-
- ata_status = le16_to_cpu(pp->crpb[out_index].flags)
- >> CRPB_FLAG_STATUS_SHIFT;
-
- /* increment our consumer index... */
- out_index = mv_inc_q_index(out_index);
+ struct ata_queued_cmd *qc;
- /* and, until we do NCQ, there should only be 1 CRPB waiting */
- WARN_ON(out_index != ((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
- >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
+ if (pp->pp_flags & MV_PP_FLAG_NCQ_EN)
+ return NULL;
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && (qc->tf.flags & ATA_TFLAG_POLLING))
+ qc = NULL;
+ return qc;
+}
- /* write out our inc'd consumer index so EDMA knows we're caught up */
- out_ptr &= EDMA_RSP_Q_BASE_LO_MASK;
- out_ptr |= out_index << EDMA_RSP_Q_PTR_SHIFT;
- writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+static void mv_unexpected_intr(struct ata_port *ap)
+{
+ struct mv_port_priv *pp = ap->private_data;
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ char *when = "";
- /* Return ATA status register for completed CRPB */
- return ata_status;
+ /*
+ * We got a device interrupt from something that
+ * was supposed to be using EDMA or polling.
+ */
+ ata_ehi_clear_desc(ehi);
+ if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
+ when = " while EDMA enabled";
+ } else {
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && (qc->tf.flags & ATA_TFLAG_POLLING))
+ when = " while polling";
+ }
+ ata_ehi_push_desc(ehi, "unexpected device interrupt%s", when);
+ ehi->err_mask |= AC_ERR_OTHER;
+ ehi->action |= ATA_EH_RESET;
+ ata_port_freeze(ap);
}
/**
* mv_err_intr - Handle error interrupts on the port
* @ap: ATA channel to manipulate
- * @reset_allowed: bool: 0 == don't trigger from reset here
+ * @qc: affected command (non-NCQ), or NULL
*
- * In most cases, just clear the interrupt and move on. However,
- * some cases require an eDMA reset, which is done right before
- * the COMRESET in mv_phy_reset(). The SERR case requires a
- * clear of pending errors in the SATA SERROR register. Finally,
- * if the port disabled DMA, update our cached copy to match.
+ * Most cases require a full reset of the chip's state machine,
+ * which also performs a COMRESET.
+ * Also, if the port disabled DMA, update our cached copy to match.
*
* LOCKING:
* Inherited from caller.
*/
-static void mv_err_intr(struct ata_port *ap, int reset_allowed)
+static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
{
void __iomem *port_mmio = mv_ap_base(ap);
- u32 edma_err_cause, serr = 0;
+ u32 edma_err_cause, eh_freeze_mask, serr = 0;
+ struct mv_port_priv *pp = ap->private_data;
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ unsigned int action = 0, err_mask = 0;
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ ata_ehi_clear_desc(ehi);
+
+ /*
+ * Read and clear the err_cause bits. This won't actually
+ * clear for some errors (eg. SError), but we will be doing
+ * a hard reset in those cases regardless, which *will* clear it.
+ */
edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+ writelfl(~edma_err_cause, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+
+ ata_ehi_push_desc(ehi, "edma_err_cause=%08x", edma_err_cause);
- if (EDMA_ERR_SERR & edma_err_cause) {
- sata_scr_read(ap, SCR_ERROR, &serr);
- sata_scr_write_flush(ap, SCR_ERROR, serr);
+ /*
+ * All generations share these EDMA error cause bits:
+ */
+ if (edma_err_cause & EDMA_ERR_DEV)
+ err_mask |= AC_ERR_DEV;
+ if (edma_err_cause & (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR |
+ EDMA_ERR_CRQB_PAR | EDMA_ERR_CRPB_PAR |
+ EDMA_ERR_INTRL_PAR)) {
+ err_mask |= AC_ERR_ATA_BUS;
+ action |= ATA_EH_RESET;
+ ata_ehi_push_desc(ehi, "parity error");
}
- if (EDMA_ERR_SELF_DIS & edma_err_cause) {
- struct mv_port_priv *pp = ap->private_data;
- pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ if (edma_err_cause & (EDMA_ERR_DEV_DCON | EDMA_ERR_DEV_CON)) {
+ ata_ehi_hotplugged(ehi);
+ ata_ehi_push_desc(ehi, edma_err_cause & EDMA_ERR_DEV_DCON ?
+ "dev disconnect" : "dev connect");
+ action |= ATA_EH_RESET;
}
- DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x "
- "SERR: 0x%08x\n", ap->print_id, edma_err_cause, serr);
- /* Clear EDMA now that SERR cleanup done */
- writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+ /*
+ * Gen-I has a different SELF_DIS bit,
+ * different FREEZE bits, and no SERR bit:
+ */
+ if (IS_GEN_I(hpriv)) {
+ eh_freeze_mask = EDMA_EH_FREEZE_5;
+ if (edma_err_cause & EDMA_ERR_SELF_DIS_5) {
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ ata_ehi_push_desc(ehi, "EDMA self-disable");
+ }
+ } else {
+ eh_freeze_mask = EDMA_EH_FREEZE;
+ if (edma_err_cause & EDMA_ERR_SELF_DIS) {
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ ata_ehi_push_desc(ehi, "EDMA self-disable");
+ }
+ if (edma_err_cause & EDMA_ERR_SERR) {
+ /*
+ * Ensure that we read our own SCR, not a pmp link SCR:
+ */
+ ap->ops->scr_read(ap, SCR_ERROR, &serr);
+ /*
+ * Don't clear SError here; leave it for libata-eh:
+ */
+ ata_ehi_push_desc(ehi, "SError=%08x", serr);
+ err_mask |= AC_ERR_ATA_BUS;
+ action |= ATA_EH_RESET;
+ }
+ }
+
+ if (!err_mask) {
+ err_mask = AC_ERR_OTHER;
+ action |= ATA_EH_RESET;
+ }
+
+ ehi->serror |= serr;
+ ehi->action |= action;
+
+ if (qc)
+ qc->err_mask |= err_mask;
+ else
+ ehi->err_mask |= err_mask;
+
+ if (edma_err_cause & eh_freeze_mask)
+ ata_port_freeze(ap);
+ else
+ ata_port_abort(ap);
+}
+
+static void mv_process_crpb_response(struct ata_port *ap,
+ struct mv_crpb *response, unsigned int tag, int ncq_enabled)
+{
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag);
+
+ if (qc) {
+ u8 ata_status;
+ u16 edma_status = le16_to_cpu(response->flags);
+ /*
+ * edma_status from a response queue entry:
+ * LSB is from EDMA_ERR_IRQ_CAUSE_OFS (non-NCQ only).
+ * MSB is saved ATA status from command completion.
+ */
+ if (!ncq_enabled) {
+ u8 err_cause = edma_status & 0xff & ~EDMA_ERR_DEV;
+ if (err_cause) {
+ /*
+ * Error will be seen/handled by mv_err_intr().
+ * So do nothing at all here.
+ */
+ return;
+ }
+ }
+ ata_status = edma_status >> CRPB_FLAG_STATUS_SHIFT;
+ qc->err_mask |= ac_err_mask(ata_status);
+ ata_qc_complete(qc);
+ } else {
+ ata_port_printk(ap, KERN_ERR, "%s: no qc for tag=%d\n",
+ __func__, tag);
+ }
+}
+
+static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ u32 in_index;
+ bool work_done = false;
+ int ncq_enabled = (pp->pp_flags & MV_PP_FLAG_NCQ_EN);
+
+ /* Get the hardware queue position index */
+ in_index = (readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
+ >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
- /* check for fatal here and recover if needed */
- if (reset_allowed && (EDMA_ERR_FATAL & edma_err_cause))
- mv_stop_and_reset(ap);
+ /* Process new responses from since the last time we looked */
+ while (in_index != pp->resp_idx) {
+ unsigned int tag;
+ struct mv_crpb *response = &pp->crpb[pp->resp_idx];
+
+ pp->resp_idx = (pp->resp_idx + 1) & MV_MAX_Q_DEPTH_MASK;
+
+ if (IS_GEN_I(hpriv)) {
+ /* 50xx: no NCQ, only one command active at a time */
+ tag = ap->link.active_tag;
+ } else {
+ /* Gen II/IIE: get command tag from CRPB entry */
+ tag = le16_to_cpu(response->id) & 0x1f;
+ }
+ mv_process_crpb_response(ap, response, tag, ncq_enabled);
+ work_done = true;
+ }
+
+ /* Update the software queue position index in hardware */
+ if (work_done)
+ writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) |
+ (pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT),
+ port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
}
/**
* mv_host_intr - Handle all interrupts on the given host controller
* @host: host specific structure
- * @relevant: port error bits relevant to this host controller
- * @hc: which host controller we're to look at
- *
- * Read then write clear the HC interrupt status then walk each
- * port connected to the HC and see if it needs servicing. Port
- * success ints are reported in the HC interrupt status reg, the
- * port error ints are reported in the higher level main
- * interrupt status register and thus are passed in via the
- * 'relevant' argument.
+ * @main_irq_cause: Main interrupt cause register for the chip.
*
* LOCKING:
* Inherited from caller.
*/
-static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc)
+static int mv_host_intr(struct ata_host *host, u32 main_irq_cause)
{
- void __iomem *mmio = host->iomap[MV_PRIMARY_BAR];
- void __iomem *hc_mmio = mv_hc_base(mmio, hc);
- struct ata_queued_cmd *qc;
- u32 hc_irq_cause;
- int shift, port, port0, hard_port, handled;
- unsigned int err_mask;
-
- if (hc == 0)
- port0 = 0;
- else
- port0 = MV_PORTS_PER_HC;
-
- /* we'll need the HC success int register in most cases */
- hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
- if (hc_irq_cause)
- writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
-
- VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n",
- hc,relevant,hc_irq_cause);
+ struct mv_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->base, *hc_mmio = NULL;
+ u32 hc_irq_cause = 0;
+ unsigned int handled = 0, port;
- for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) {
- u8 ata_status = 0;
+ for (port = 0; port < hpriv->n_ports; port++) {
struct ata_port *ap = host->ports[port];
- struct mv_port_priv *pp = ap->private_data;
-
- hard_port = mv_hardport_from_port(port); /* range 0..3 */
- handled = 0; /* ensure ata_status is set if handled++ */
-
- /* Note that DEV_IRQ might happen spuriously during EDMA,
- * and should be ignored in such cases.
- * The cause of this is still under investigation.
+ struct mv_port_priv *pp;
+ unsigned int shift, hardport, port_cause;
+ /*
+ * When we move to the second hc, flag our cached
+ * copies of hc_mmio (and hc_irq_cause) as invalid again.
*/
- if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
- /* EDMA: check for response queue interrupt */
- if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) {
- ata_status = mv_get_crpb_status(ap);
- handled = 1;
- }
- } else {
- /* PIO: check for device (drive) interrupt */
- if ((DEV_IRQ << hard_port) & hc_irq_cause) {
- ata_status = readb(ap->ioaddr.status_addr);
- handled = 1;
- /* ignore spurious intr if drive still BUSY */
- if (ata_status & ATA_BUSY) {
- ata_status = 0;
- handled = 0;
- }
- }
- }
-
- if (ap && (ap->flags & ATA_FLAG_DISABLED))
+ if (port == MV_PORTS_PER_HC)
+ hc_mmio = NULL;
+ /*
+ * Do nothing if port is not interrupting or is disabled:
+ */
+ MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport);
+ port_cause = (main_irq_cause >> shift) & (DONE_IRQ | ERR_IRQ);
+ if (!port_cause || !ap || (ap->flags & ATA_FLAG_DISABLED))
continue;
-
- err_mask = ac_err_mask(ata_status);
-
- shift = port << 1; /* (port * 2) */
- if (port >= MV_PORTS_PER_HC) {
- shift++; /* skip bit 8 in the HC Main IRQ reg */
- }
- if ((PORT0_ERR << shift) & relevant) {
- mv_err_intr(ap, 1);
- err_mask |= AC_ERR_OTHER;
+ /*
+ * Each hc within the host has its own hc_irq_cause register.
+ * We defer reading it until we know we need it, right now:
+ *
+ * FIXME later: we don't really need to read this register
+ * (some logic changes required below if we go that way),
+ * because it doesn't tell us anything new. But we do need
+ * to write to it, outside the top of this loop,
+ * to reset the interrupt triggers for next time.
+ */
+ if (!hc_mmio) {
+ hc_mmio = mv_hc_base_from_port(mmio, port);
+ hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
+ writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
handled = 1;
}
-
- if (handled) {
- qc = ata_qc_from_tag(ap, ap->active_tag);
- if (qc && (qc->flags & ATA_QCFLAG_ACTIVE)) {
- VPRINTK("port %u IRQ found for qc, "
- "ata_status 0x%x\n", port,ata_status);
- /* mark qc status appropriately */
- if (!(qc->tf.flags & ATA_TFLAG_POLLING)) {
- qc->err_mask |= err_mask;
- ata_qc_complete(qc);
+ /*
+ * Process completed CRPB response(s) before other events.
+ */
+ pp = ap->private_data;
+ if (hc_irq_cause & (DMA_IRQ << hardport)) {
+ if (pp->pp_flags & MV_PP_FLAG_EDMA_EN)
+ mv_process_crpb_entries(ap, pp);
+ }
+ /*
+ * Handle chip-reported errors, or continue on to handle PIO.
+ */
+ if (unlikely(port_cause & ERR_IRQ)) {
+ mv_err_intr(ap, mv_get_active_qc(ap));
+ } else if (hc_irq_cause & (DEV_IRQ << hardport)) {
+ if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) {
+ struct ata_queued_cmd *qc = mv_get_active_qc(ap);
+ if (qc) {
+ ata_sff_host_intr(ap, qc);
+ continue;
}
}
+ mv_unexpected_intr(ap);
}
}
- VPRINTK("EXIT\n");
+ return handled;
+}
+
+static int mv_pci_error(struct ata_host *host, void __iomem *mmio)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ struct ata_port *ap;
+ struct ata_queued_cmd *qc;
+ struct ata_eh_info *ehi;
+ unsigned int i, err_mask, printed = 0;
+ u32 err_cause;
+
+ err_cause = readl(mmio + hpriv->irq_cause_ofs);
+
+ dev_printk(KERN_ERR, host->dev, "PCI ERROR; PCI IRQ cause=0x%08x\n",
+ err_cause);
+
+ DPRINTK("All regs @ PCI error\n");
+ mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev));
+
+ writelfl(0, mmio + hpriv->irq_cause_ofs);
+
+ for (i = 0; i < host->n_ports; i++) {
+ ap = host->ports[i];
+ if (!ata_link_offline(&ap->link)) {
+ ehi = &ap->link.eh_info;
+ ata_ehi_clear_desc(ehi);
+ if (!printed++)
+ ata_ehi_push_desc(ehi,
+ "PCI err cause 0x%08x", err_cause);
+ err_mask = AC_ERR_HOST_BUS;
+ ehi->action = ATA_EH_RESET;
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc)
+ qc->err_mask |= err_mask;
+ else
+ ehi->err_mask |= err_mask;
+
+ ata_port_freeze(ap);
+ }
+ }
+ return 1; /* handled */
}
/**
- * mv_interrupt -
+ * mv_interrupt - Main interrupt event handler
* @irq: unused
* @dev_instance: private data; in this case the host structure
- * @regs: unused
*
* Read the read only register to determine if any host
* controllers have pending interrupts. If so, call lower level
static irqreturn_t mv_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
- unsigned int hc, handled = 0, n_hcs;
- void __iomem *mmio = host->iomap[MV_PRIMARY_BAR];
- struct mv_host_priv *hpriv;
- u32 irq_stat;
-
- irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS);
-
- /* check the cases where we either have nothing pending or have read
- * a bogus register value which can indicate HW removal or PCI fault
- */
- if (!irq_stat || (0xffffffffU == irq_stat))
- return IRQ_NONE;
+ struct mv_host_priv *hpriv = host->private_data;
+ unsigned int handled = 0;
+ u32 main_irq_cause, main_irq_mask;
- n_hcs = mv_get_hc_count(host->ports[0]->flags);
spin_lock(&host->lock);
-
- for (hc = 0; hc < n_hcs; hc++) {
- u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT));
- if (relevant) {
- mv_host_intr(host, relevant, hc);
- handled++;
- }
- }
-
- hpriv = host->private_data;
- if (IS_60XX(hpriv)) {
- /* deal with the interrupt coalescing bits */
- if (irq_stat & (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE)) {
- writelfl(0, mmio + MV_IRQ_COAL_CAUSE_LO);
- writelfl(0, mmio + MV_IRQ_COAL_CAUSE_HI);
- writelfl(0, mmio + MV_IRQ_COAL_CAUSE);
- }
- }
-
- if (PCI_ERR & irq_stat) {
- printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n",
- readl(mmio + PCI_IRQ_CAUSE_OFS));
-
- DPRINTK("All regs @ PCI error\n");
- mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev));
-
- writelfl(0, mmio + PCI_IRQ_CAUSE_OFS);
- handled++;
+ main_irq_cause = readl(hpriv->main_irq_cause_addr);
+ main_irq_mask = readl(hpriv->main_irq_mask_addr);
+ /*
+ * Deal with cases where we either have nothing pending, or have read
+ * a bogus register value which can indicate HW removal or PCI fault.
+ */
+ if ((main_irq_cause & main_irq_mask) && (main_irq_cause != 0xffffffffU)) {
+ if (unlikely((main_irq_cause & PCI_ERR) && HAS_PCI(host)))
+ handled = mv_pci_error(host, hpriv->base);
+ else
+ handled = mv_host_intr(host, main_irq_cause);
}
spin_unlock(&host->lock);
-
return IRQ_RETVAL(handled);
}
-static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port)
-{
- void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port);
- unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL;
-
- return hc_mmio + ofs;
-}
-
static unsigned int mv5_scr_offset(unsigned int sc_reg_in)
{
unsigned int ofs;
return ofs;
}
-static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in)
+static int mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val)
{
- void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ void __iomem *mmio = hpriv->base;
void __iomem *addr = mv5_phy_base(mmio, ap->port_no);
unsigned int ofs = mv5_scr_offset(sc_reg_in);
- if (ofs != 0xffffffffU)
- return readl(addr + ofs);
- else
- return (u32) ofs;
+ if (ofs != 0xffffffffU) {
+ *val = readl(addr + ofs);
+ return 0;
+ } else
+ return -EINVAL;
}
-static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
+static int mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
{
- void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ void __iomem *mmio = hpriv->base;
void __iomem *addr = mv5_phy_base(mmio, ap->port_no);
unsigned int ofs = mv5_scr_offset(sc_reg_in);
- if (ofs != 0xffffffffU)
+ if (ofs != 0xffffffffU) {
writelfl(val, addr + ofs);
+ return 0;
+ } else
+ return -EINVAL;
}
-static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio)
+static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio)
{
- u8 rev_id;
+ struct pci_dev *pdev = to_pci_dev(host->dev);
int early_5080;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
-
- early_5080 = (pdev->device == 0x5080) && (rev_id == 0);
+ early_5080 = (pdev->device == 0x5080) && (pdev->revision == 0);
if (!early_5080) {
u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL);
writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL);
}
- mv_reset_pci_bus(pdev, mmio);
+ mv_reset_pci_bus(host, mmio);
}
static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
{
- writel(0x0fcfffff, mmio + MV_FLASH_CTL);
+ writel(0x0fcfffff, mmio + MV_FLASH_CTL_OFS);
}
static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx,
{
u32 tmp;
- writel(0, mmio + MV_GPIO_PORT_CTL);
+ writel(0, mmio + MV_GPIO_PORT_CTL_OFS);
/* FIXME: handle MV_HP_ERRATA_50XXB2 errata */
int fix_apm_sq = (hpriv->hp_flags & MV_HP_ERRATA_50XXB0);
if (fix_apm_sq) {
- tmp = readl(phy_mmio + MV5_LT_MODE);
+ tmp = readl(phy_mmio + MV5_LTMODE_OFS);
tmp |= (1 << 19);
- writel(tmp, phy_mmio + MV5_LT_MODE);
+ writel(tmp, phy_mmio + MV5_LTMODE_OFS);
- tmp = readl(phy_mmio + MV5_PHY_CTL);
+ tmp = readl(phy_mmio + MV5_PHY_CTL_OFS);
tmp &= ~0x3;
tmp |= 0x1;
- writel(tmp, phy_mmio + MV5_PHY_CTL);
+ writel(tmp, phy_mmio + MV5_PHY_CTL_OFS);
}
tmp = readl(phy_mmio + MV5_PHY_MODE);
{
void __iomem *port_mmio = mv_port_base(mmio, port);
- writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
-
- mv_channel_reset(hpriv, mmio, port);
+ mv_reset_channel(hpriv, mmio, port);
ZERO(0x028); /* command */
writel(0x11f, port_mmio + EDMA_CFG_OFS);
ZERO(0x024); /* respq outp */
ZERO(0x020); /* respq inp */
ZERO(0x02c); /* test control */
- writel(0xbc, port_mmio + EDMA_IORDY_TMOUT);
+ writel(0xbc, port_mmio + EDMA_IORDY_TMOUT_OFS);
}
#undef ZERO
#undef ZERO
#define ZERO(reg) writel(0, mmio + (reg))
-static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio)
+static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio)
{
+ struct mv_host_priv *hpriv = host->private_data;
u32 tmp;
- tmp = readl(mmio + MV_PCI_MODE);
+ tmp = readl(mmio + MV_PCI_MODE_OFS);
tmp &= 0xff00ffff;
- writel(tmp, mmio + MV_PCI_MODE);
+ writel(tmp, mmio + MV_PCI_MODE_OFS);
ZERO(MV_PCI_DISC_TIMER);
ZERO(MV_PCI_MSI_TRIGGER);
- writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT);
- ZERO(HC_MAIN_IRQ_MASK_OFS);
+ writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT_OFS);
+ ZERO(PCI_HC_MAIN_IRQ_MASK_OFS);
ZERO(MV_PCI_SERR_MASK);
- ZERO(PCI_IRQ_CAUSE_OFS);
- ZERO(PCI_IRQ_MASK_OFS);
+ ZERO(hpriv->irq_cause_ofs);
+ ZERO(hpriv->irq_mask_ofs);
ZERO(MV_PCI_ERR_LOW_ADDRESS);
ZERO(MV_PCI_ERR_HIGH_ADDRESS);
ZERO(MV_PCI_ERR_ATTRIBUTE);
mv5_reset_flash(hpriv, mmio);
- tmp = readl(mmio + MV_GPIO_PORT_CTL);
+ tmp = readl(mmio + MV_GPIO_PORT_CTL_OFS);
tmp &= 0x3;
tmp |= (1 << 5) | (1 << 6);
- writel(tmp, mmio + MV_GPIO_PORT_CTL);
+ writel(tmp, mmio + MV_GPIO_PORT_CTL_OFS);
}
/**
for (i = 0; i < 1000; i++) {
udelay(1);
t = readl(reg);
- if (PCI_MASTER_EMPTY & t) {
+ if (PCI_MASTER_EMPTY & t)
break;
- }
}
if (!(PCI_MASTER_EMPTY & t)) {
printk(KERN_ERR DRV_NAME ": PCI master won't flush\n");
void __iomem *port_mmio;
u32 tmp;
- tmp = readl(mmio + MV_RESET_CFG);
+ tmp = readl(mmio + MV_RESET_CFG_OFS);
if ((tmp & (1 << 0)) == 0) {
hpriv->signal[idx].amps = 0x7 << 8;
hpriv->signal[idx].pre = 0x1 << 5;
static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
{
- writel(0x00000060, mmio + MV_GPIO_PORT_CTL);
+ writel(0x00000060, mmio + MV_GPIO_PORT_CTL_OFS);
}
static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
m4 = readl(port_mmio + PHY_MODE4);
if (hp_flags & MV_HP_ERRATA_60X1B2)
- tmp = readl(port_mmio + 0x310);
+ tmp = readl(port_mmio + PHY_MODE3);
+ /* workaround for errata FEr SATA#10 (part 1) */
m4 = (m4 & ~(1 << 1)) | (1 << 0);
writel(m4, port_mmio + PHY_MODE4);
if (hp_flags & MV_HP_ERRATA_60X1B2)
- writel(tmp, port_mmio + 0x310);
+ writel(tmp, port_mmio + PHY_MODE3);
}
/* Revert values of pre-emphasis and signal amps to the saved ones */
writel(m2, port_mmio + PHY_MODE2);
}
-static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
- unsigned int port_no)
+/* TODO: use the generic LED interface to configure the SATA Presence */
+/* & Acitivy LEDs on the board */
+static void mv_soc_enable_leds(struct mv_host_priv *hpriv,
+ void __iomem *mmio)
{
- void __iomem *port_mmio = mv_port_base(mmio, port_no);
+ return;
+}
- writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
+static void mv_soc_read_preamp(struct mv_host_priv *hpriv, int idx,
+ void __iomem *mmio)
+{
+ void __iomem *port_mmio;
+ u32 tmp;
- if (IS_60XX(hpriv)) {
- u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
- ifctl |= (1 << 7); /* enable gen2i speed */
- ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
- writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
- }
+ port_mmio = mv_port_base(mmio, idx);
+ tmp = readl(port_mmio + PHY_MODE2);
- udelay(25); /* allow reset propagation */
+ hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */
+ hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */
+}
- /* Spec never mentions clearing the bit. Marvell's driver does
- * clear the bit, however.
- */
- writelfl(0, port_mmio + EDMA_CMD_OFS);
+#undef ZERO
+#define ZERO(reg) writel(0, port_mmio + (reg))
+static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int port)
+{
+ void __iomem *port_mmio = mv_port_base(mmio, port);
- hpriv->ops->phy_errata(hpriv, mmio, port_no);
+ mv_reset_channel(hpriv, mmio, port);
+
+ ZERO(0x028); /* command */
+ writel(0x101f, port_mmio + EDMA_CFG_OFS);
+ ZERO(0x004); /* timer */
+ ZERO(0x008); /* irq err cause */
+ ZERO(0x00c); /* irq err mask */
+ ZERO(0x010); /* rq bah */
+ ZERO(0x014); /* rq inp */
+ ZERO(0x018); /* rq outp */
+ ZERO(0x01c); /* respq bah */
+ ZERO(0x024); /* respq outp */
+ ZERO(0x020); /* respq inp */
+ ZERO(0x02c); /* test control */
+ writel(0xbc, port_mmio + EDMA_IORDY_TMOUT_OFS);
+}
+
+#undef ZERO
+
+#define ZERO(reg) writel(0, hc_mmio + (reg))
+static void mv_soc_reset_one_hc(struct mv_host_priv *hpriv,
+ void __iomem *mmio)
+{
+ void __iomem *hc_mmio = mv_hc_base(mmio, 0);
+
+ ZERO(0x00c);
+ ZERO(0x010);
+ ZERO(0x014);
- if (IS_50XX(hpriv))
- mdelay(1);
}
-static void mv_stop_and_reset(struct ata_port *ap)
+#undef ZERO
+
+static int mv_soc_reset_hc(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int n_hc)
{
- struct mv_host_priv *hpriv = ap->host->private_data;
- void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
+ unsigned int port;
- mv_stop_dma(ap);
+ for (port = 0; port < hpriv->n_ports; port++)
+ mv_soc_reset_hc_port(hpriv, mmio, port);
- mv_channel_reset(hpriv, mmio, ap->port_no);
+ mv_soc_reset_one_hc(hpriv, mmio);
- __mv_phy_reset(ap, 0);
+ return 0;
}
-static inline void __msleep(unsigned int msec, int can_sleep)
+static void mv_soc_reset_flash(struct mv_host_priv *hpriv,
+ void __iomem *mmio)
{
- if (can_sleep)
- msleep(msec);
- else
- mdelay(msec);
+ return;
}
-/**
- * __mv_phy_reset - Perform eDMA reset followed by COMRESET
- * @ap: ATA channel to manipulate
- *
- * Part of this is taken from __sata_phy_reset and modified to
- * not sleep since this routine gets called from interrupt level.
- *
- * LOCKING:
- * Inherited from caller. This is coded to safe to call at
- * interrupt level, i.e. it does not sleep.
- */
-static void __mv_phy_reset(struct ata_port *ap, int can_sleep)
+static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio)
{
- struct mv_port_priv *pp = ap->private_data;
- struct mv_host_priv *hpriv = ap->host->private_data;
- void __iomem *port_mmio = mv_ap_base(ap);
- struct ata_taskfile tf;
- struct ata_device *dev = &ap->device[0];
- unsigned long timeout;
- int retry = 5;
- u32 sstatus;
-
- VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio);
-
- DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x "
- "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS),
- mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL));
+ return;
+}
- /* Issue COMRESET via SControl */
-comreset_retry:
- sata_scr_write_flush(ap, SCR_CONTROL, 0x301);
- __msleep(1, can_sleep);
+static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i)
+{
+ u32 ifcfg = readl(port_mmio + SATA_INTERFACE_CFG_OFS);
- sata_scr_write_flush(ap, SCR_CONTROL, 0x300);
- __msleep(20, can_sleep);
+ ifcfg = (ifcfg & 0xf7f) | 0x9b1000; /* from chip spec */
+ if (want_gen2i)
+ ifcfg |= (1 << 7); /* enable gen2i speed */
+ writelfl(ifcfg, port_mmio + SATA_INTERFACE_CFG_OFS);
+}
- timeout = jiffies + msecs_to_jiffies(200);
- do {
- sata_scr_read(ap, SCR_STATUS, &sstatus);
- if (((sstatus & 0x3) == 3) || ((sstatus & 0x3) == 0))
- break;
+static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port_no)
+{
+ void __iomem *port_mmio = mv_port_base(mmio, port_no);
- __msleep(1, can_sleep);
- } while (time_before(jiffies, timeout));
+ /*
+ * The datasheet warns against setting EDMA_RESET when EDMA is active
+ * (but doesn't say what the problem might be). So we first try
+ * to disable the EDMA engine before doing the EDMA_RESET operation.
+ */
+ mv_stop_edma_engine(port_mmio);
+ writelfl(EDMA_RESET, port_mmio + EDMA_CMD_OFS);
- /* work around errata */
- if (IS_60XX(hpriv) &&
- (sstatus != 0x0) && (sstatus != 0x113) && (sstatus != 0x123) &&
- (retry-- > 0))
- goto comreset_retry;
+ if (!IS_GEN_I(hpriv)) {
+ /* Enable 3.0gb/s link speed: this survives EDMA_RESET */
+ mv_setup_ifcfg(port_mmio, 1);
+ }
+ /*
+ * Strobing EDMA_RESET here causes a hard reset of the SATA transport,
+ * link, and physical layers. It resets all SATA interface registers
+ * (except for SATA_INTERFACE_CFG), and issues a COMRESET to the dev.
+ */
+ writelfl(EDMA_RESET, port_mmio + EDMA_CMD_OFS);
+ udelay(25); /* allow reset propagation */
+ writelfl(0, port_mmio + EDMA_CMD_OFS);
- DPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x "
- "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS),
- mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL));
+ hpriv->ops->phy_errata(hpriv, mmio, port_no);
- if (ata_port_online(ap)) {
- ata_port_probe(ap);
- } else {
- sata_scr_read(ap, SCR_STATUS, &sstatus);
- ata_port_printk(ap, KERN_INFO,
- "no device found (phy stat %08x)\n", sstatus);
- ata_port_disable(ap);
- return;
- }
+ if (IS_GEN_I(hpriv))
+ mdelay(1);
+}
- /* even after SStatus reflects that device is ready,
- * it seems to take a while for link to be fully
- * established (and thus Status no longer 0x80/0x7F),
- * so we poll a bit for that, here.
- */
- retry = 20;
- while (1) {
- u8 drv_stat = ata_check_status(ap);
- if ((drv_stat != 0x80) && (drv_stat != 0x7f))
- break;
- __msleep(500, can_sleep);
- if (retry-- <= 0)
- break;
+static void mv_pmp_select(struct ata_port *ap, int pmp)
+{
+ if (sata_pmp_supported(ap)) {
+ void __iomem *port_mmio = mv_ap_base(ap);
+ u32 reg = readl(port_mmio + SATA_IFCTL_OFS);
+ int old = reg & 0xf;
+
+ if (old != pmp) {
+ reg = (reg & ~0xf) | pmp;
+ writelfl(reg, port_mmio + SATA_IFCTL_OFS);
+ }
}
+}
- tf.lbah = readb(ap->ioaddr.lbah_addr);
- tf.lbam = readb(ap->ioaddr.lbam_addr);
- tf.lbal = readb(ap->ioaddr.lbal_addr);
- tf.nsect = readb(ap->ioaddr.nsect_addr);
+static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ mv_pmp_select(link->ap, sata_srst_pmp(link));
+ return sata_std_hardreset(link, class, deadline);
+}
- dev->class = ata_dev_classify(&tf);
- if (!ata_dev_enabled(dev)) {
- VPRINTK("Port disabled post-sig: No device present.\n");
- ata_port_disable(ap);
- }
+static int mv_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ mv_pmp_select(link->ap, sata_srst_pmp(link));
+ return ata_sff_softreset(link, class, deadline);
+}
- writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+static int mv_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ struct mv_port_priv *pp = ap->private_data;
+ void __iomem *mmio = hpriv->base;
+ int rc, attempts = 0, extra = 0;
+ u32 sstatus;
+ bool online;
+ mv_reset_channel(hpriv, mmio, ap->port_no);
pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
- VPRINTK("EXIT\n");
+ /* Workaround for errata FEr SATA#10 (part 2) */
+ do {
+ const unsigned long *timing =
+ sata_ehc_deb_timing(&link->eh_context);
+
+ rc = sata_link_hardreset(link, timing, deadline + extra,
+ &online, NULL);
+ if (rc)
+ return rc;
+ sata_scr_read(link, SCR_STATUS, &sstatus);
+ if (!IS_GEN_I(hpriv) && ++attempts >= 5 && sstatus == 0x121) {
+ /* Force 1.5gb/s link speed and try again */
+ mv_setup_ifcfg(mv_ap_base(ap), 0);
+ if (time_after(jiffies + HZ, deadline))
+ extra = HZ; /* only extend it once, max */
+ }
+ } while (sstatus != 0x0 && sstatus != 0x113 && sstatus != 0x123);
+
+ return rc;
}
-static void mv_phy_reset(struct ata_port *ap)
+static void mv_eh_freeze(struct ata_port *ap)
{
- __mv_phy_reset(ap, 1);
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ unsigned int shift, hardport, port = ap->port_no;
+ u32 main_irq_mask;
+
+ /* FIXME: handle coalescing completion events properly */
+
+ mv_stop_edma(ap);
+ MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport);
+
+ /* disable assertion of portN err, done events */
+ main_irq_mask = readl(hpriv->main_irq_mask_addr);
+ main_irq_mask &= ~((DONE_IRQ | ERR_IRQ) << shift);
+ writelfl(main_irq_mask, hpriv->main_irq_mask_addr);
}
-/**
- * mv_eng_timeout - Routine called by libata when SCSI times out I/O
- * @ap: ATA channel to manipulate
- *
- * Intent is to clear all pending error conditions, reset the
- * chip/bus, fail the command, and move on.
- *
- * LOCKING:
- * This routine holds the host lock while failing the command.
- */
-static void mv_eng_timeout(struct ata_port *ap)
+static void mv_eh_thaw(struct ata_port *ap)
{
- void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
- struct ata_queued_cmd *qc;
- unsigned long flags;
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ unsigned int shift, hardport, port = ap->port_no;
+ void __iomem *hc_mmio = mv_hc_base_from_port(hpriv->base, port);
+ void __iomem *port_mmio = mv_ap_base(ap);
+ u32 main_irq_mask, hc_irq_cause;
- ata_port_printk(ap, KERN_ERR, "Entering mv_eng_timeout\n");
- DPRINTK("All regs @ start of eng_timeout\n");
- mv_dump_all_regs(mmio, ap->port_no, to_pci_dev(ap->host->dev));
+ /* FIXME: handle coalescing completion events properly */
- qc = ata_qc_from_tag(ap, ap->active_tag);
- printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n",
- mmio, ap, qc, qc->scsicmd, &qc->scsicmd->cmnd);
+ MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport);
- spin_lock_irqsave(&ap->host->lock, flags);
- mv_err_intr(ap, 0);
- mv_stop_and_reset(ap);
- spin_unlock_irqrestore(&ap->host->lock, flags);
+ /* clear EDMA errors on this port */
+ writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
- WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
- if (qc->flags & ATA_QCFLAG_ACTIVE) {
- qc->err_mask |= AC_ERR_TIMEOUT;
- ata_eh_qc_complete(qc);
- }
+ /* clear pending irq events */
+ hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
+ hc_irq_cause &= ~((DEV_IRQ | DMA_IRQ) << hardport);
+ writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
+
+ /* enable assertion of portN err, done events */
+ main_irq_mask = readl(hpriv->main_irq_mask_addr);
+ main_irq_mask |= ((DONE_IRQ | ERR_IRQ) << shift);
+ writelfl(main_irq_mask, hpriv->main_irq_mask_addr);
}
/**
writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs);
writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
- /* unmask all EDMA error interrupts */
- writelfl(~0, port_mmio + EDMA_ERR_IRQ_MASK_OFS);
+ /* unmask all non-transient EDMA error interrupts */
+ writelfl(~EDMA_ERR_IRQ_TRANSIENT, port_mmio + EDMA_ERR_IRQ_MASK_OFS);
VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n",
readl(port_mmio + EDMA_CFG_OFS),
readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS));
}
+static unsigned int mv_in_pcix_mode(struct ata_host *host)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->base;
+ u32 reg;
+
+ if (!HAS_PCI(host) || !IS_PCIE(hpriv))
+ return 0; /* not PCI-X capable */
+ reg = readl(mmio + MV_PCI_MODE_OFS);
+ if ((reg & MV_PCI_MODE_MASK) == 0)
+ return 0; /* conventional PCI mode */
+ return 1; /* chip is in PCI-X mode */
+}
+
+static int mv_pci_cut_through_okay(struct ata_host *host)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->base;
+ u32 reg;
+
+ if (!mv_in_pcix_mode(host)) {
+ reg = readl(mmio + PCI_COMMAND_OFS);
+ if (reg & PCI_COMMAND_MRDTRIG)
+ return 0; /* not okay */
+ }
+ return 1; /* okay */
+}
+
static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
{
struct pci_dev *pdev = to_pci_dev(host->dev);
struct mv_host_priv *hpriv = host->private_data;
- u8 rev_id;
u32 hp_flags = hpriv->hp_flags;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
-
- switch(board_idx) {
+ switch (board_idx) {
case chip_5080:
hpriv->ops = &mv5xxx_ops;
- hp_flags |= MV_HP_50XX;
+ hp_flags |= MV_HP_GEN_I;
- switch (rev_id) {
+ switch (pdev->revision) {
case 0x1:
hp_flags |= MV_HP_ERRATA_50XXB0;
break;
case chip_504x:
case chip_508x:
hpriv->ops = &mv5xxx_ops;
- hp_flags |= MV_HP_50XX;
+ hp_flags |= MV_HP_GEN_I;
- switch (rev_id) {
+ switch (pdev->revision) {
case 0x0:
hp_flags |= MV_HP_ERRATA_50XXB0;
break;
case chip_604x:
case chip_608x:
hpriv->ops = &mv6xxx_ops;
+ hp_flags |= MV_HP_GEN_II;
- switch (rev_id) {
+ switch (pdev->revision) {
case 0x7:
hp_flags |= MV_HP_ERRATA_60X1B2;
break;
break;
case chip_7042:
+ hp_flags |= MV_HP_PCIE | MV_HP_CUT_THROUGH;
+ if (pdev->vendor == PCI_VENDOR_ID_TTI &&
+ (pdev->device == 0x2300 || pdev->device == 0x2310))
+ {
+ /*
+ * Highpoint RocketRAID PCIe 23xx series cards:
+ *
+ * Unconfigured drives are treated as "Legacy"
+ * by the BIOS, and it overwrites sector 8 with
+ * a "Lgcy" metadata block prior to Linux boot.
+ *
+ * Configured drives (RAID or JBOD) leave sector 8
+ * alone, but instead overwrite a high numbered
+ * sector for the RAID metadata. This sector can
+ * be determined exactly, by truncating the physical
+ * drive capacity to a nice even GB value.
+ *
+ * RAID metadata is at: (dev->n_sectors & ~0xfffff)
+ *
+ * Warn the user, lest they think we're just buggy.
+ */
+ printk(KERN_WARNING DRV_NAME ": Highpoint RocketRAID"
+ " BIOS CORRUPTS DATA on all attached drives,"
+ " regardless of if/how they are configured."
+ " BEWARE!\n");
+ printk(KERN_WARNING DRV_NAME ": For data safety, do not"
+ " use sectors 8-9 on \"Legacy\" drives,"
+ " and avoid the final two gigabytes on"
+ " all RocketRAID BIOS initialized drives.\n");
+ }
+ /* drop through */
case chip_6042:
hpriv->ops = &mv6xxx_ops;
-
hp_flags |= MV_HP_GEN_IIE;
+ if (board_idx == chip_6042 && mv_pci_cut_through_okay(host))
+ hp_flags |= MV_HP_CUT_THROUGH;
- switch (rev_id) {
+ switch (pdev->revision) {
case 0x0:
hp_flags |= MV_HP_ERRATA_XX42A0;
break;
break;
}
break;
+ case chip_soc:
+ hpriv->ops = &mv_soc_ops;
+ hp_flags |= MV_HP_ERRATA_60X1C0;
+ break;
default:
- printk(KERN_ERR DRV_NAME ": BUG: invalid board index %u\n", board_idx);
+ dev_printk(KERN_ERR, host->dev,
+ "BUG: invalid board index %u\n", board_idx);
return 1;
}
hpriv->hp_flags = hp_flags;
+ if (hp_flags & MV_HP_PCIE) {
+ hpriv->irq_cause_ofs = PCIE_IRQ_CAUSE_OFS;
+ hpriv->irq_mask_ofs = PCIE_IRQ_MASK_OFS;
+ hpriv->unmask_all_irqs = PCIE_UNMASK_ALL_IRQS;
+ } else {
+ hpriv->irq_cause_ofs = PCI_IRQ_CAUSE_OFS;
+ hpriv->irq_mask_ofs = PCI_IRQ_MASK_OFS;
+ hpriv->unmask_all_irqs = PCI_UNMASK_ALL_IRQS;
+ }
return 0;
}
static int mv_init_host(struct ata_host *host, unsigned int board_idx)
{
int rc = 0, n_hc, port, hc;
- struct pci_dev *pdev = to_pci_dev(host->dev);
- void __iomem *mmio = host->iomap[MV_PRIMARY_BAR];
struct mv_host_priv *hpriv = host->private_data;
-
- /* global interrupt mask */
- writel(0, mmio + HC_MAIN_IRQ_MASK_OFS);
+ void __iomem *mmio = hpriv->base;
rc = mv_chip_id(host, board_idx);
if (rc)
goto done;
+ if (HAS_PCI(host)) {
+ hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS;
+ hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
+ } else {
+ hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE_OFS;
+ hpriv->main_irq_mask_addr = mmio + SOC_HC_MAIN_IRQ_MASK_OFS;
+ }
+
+ /* global interrupt mask: 0 == mask everything */
+ writel(0, hpriv->main_irq_mask_addr);
+
n_hc = mv_get_hc_count(host->ports[0]->flags);
for (port = 0; port < host->n_ports; port++)
goto done;
hpriv->ops->reset_flash(hpriv, mmio);
- hpriv->ops->reset_bus(pdev, mmio);
+ hpriv->ops->reset_bus(host, mmio);
hpriv->ops->enable_leds(hpriv, mmio);
for (port = 0; port < host->n_ports; port++) {
- if (IS_60XX(hpriv)) {
- void __iomem *port_mmio = mv_port_base(mmio, port);
-
- u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
- ifctl |= (1 << 7); /* enable gen2i speed */
- ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
- writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
- }
+ struct ata_port *ap = host->ports[port];
+ void __iomem *port_mmio = mv_port_base(mmio, port);
- hpriv->ops->phy_errata(hpriv, mmio, port);
- }
+ mv_port_init(&ap->ioaddr, port_mmio);
- for (port = 0; port < host->n_ports; port++) {
- void __iomem *port_mmio = mv_port_base(mmio, port);
- mv_port_init(&host->ports[port]->ioaddr, port_mmio);
+#ifdef CONFIG_PCI
+ if (HAS_PCI(host)) {
+ unsigned int offset = port_mmio - mmio;
+ ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio");
+ ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port");
+ }
+#endif
}
for (hc = 0; hc < n_hc; hc++) {
writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
}
- /* Clear any currently outstanding host interrupt conditions */
- writelfl(0, mmio + PCI_IRQ_CAUSE_OFS);
+ if (HAS_PCI(host)) {
+ /* Clear any currently outstanding host interrupt conditions */
+ writelfl(0, mmio + hpriv->irq_cause_ofs);
+
+ /* and unmask interrupt generation for host regs */
+ writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
+ if (IS_GEN_I(hpriv))
+ writelfl(~HC_MAIN_MASKED_IRQS_5,
+ hpriv->main_irq_mask_addr);
+ else
+ writelfl(~HC_MAIN_MASKED_IRQS,
+ hpriv->main_irq_mask_addr);
+
+ VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x "
+ "PCI int cause/mask=0x%08x/0x%08x\n",
+ readl(hpriv->main_irq_cause_addr),
+ readl(hpriv->main_irq_mask_addr),
+ readl(mmio + hpriv->irq_cause_ofs),
+ readl(mmio + hpriv->irq_mask_ofs));
+ } else {
+ writelfl(~HC_MAIN_MASKED_IRQS_SOC,
+ hpriv->main_irq_mask_addr);
+ VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x\n",
+ readl(hpriv->main_irq_cause_addr),
+ readl(hpriv->main_irq_mask_addr));
+ }
+done:
+ return rc;
+}
- /* and unmask interrupt generation for host regs */
- writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS);
+static int mv_create_dma_pools(struct mv_host_priv *hpriv, struct device *dev)
+{
+ hpriv->crqb_pool = dmam_pool_create("crqb_q", dev, MV_CRQB_Q_SZ,
+ MV_CRQB_Q_SZ, 0);
+ if (!hpriv->crqb_pool)
+ return -ENOMEM;
- if (IS_50XX(hpriv))
- writelfl(~HC_MAIN_MASKED_IRQS_5, mmio + HC_MAIN_IRQ_MASK_OFS);
- else
- writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS);
+ hpriv->crpb_pool = dmam_pool_create("crpb_q", dev, MV_CRPB_Q_SZ,
+ MV_CRPB_Q_SZ, 0);
+ if (!hpriv->crpb_pool)
+ return -ENOMEM;
- VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x "
- "PCI int cause/mask=0x%08x/0x%08x\n",
- readl(mmio + HC_MAIN_IRQ_CAUSE_OFS),
- readl(mmio + HC_MAIN_IRQ_MASK_OFS),
- readl(mmio + PCI_IRQ_CAUSE_OFS),
- readl(mmio + PCI_IRQ_MASK_OFS));
+ hpriv->sg_tbl_pool = dmam_pool_create("sg_tbl", dev, MV_SG_TBL_SZ,
+ MV_SG_TBL_SZ, 0);
+ if (!hpriv->sg_tbl_pool)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void mv_conf_mbus_windows(struct mv_host_priv *hpriv,
+ struct mbus_dram_target_info *dram)
+{
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ writel(0, hpriv->base + WINDOW_CTRL(i));
+ writel(0, hpriv->base + WINDOW_BASE(i));
+ }
+
+ for (i = 0; i < dram->num_cs; i++) {
+ struct mbus_dram_window *cs = dram->cs + i;
+
+ writel(((cs->size - 1) & 0xffff0000) |
+ (cs->mbus_attr << 8) |
+ (dram->mbus_dram_target_id << 4) | 1,
+ hpriv->base + WINDOW_CTRL(i));
+ writel(cs->base, hpriv->base + WINDOW_BASE(i));
+ }
+}
+
+/**
+ * mv_platform_probe - handle a positive probe of an soc Marvell
+ * host
+ * @pdev: platform device found
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv_platform_probe(struct platform_device *pdev)
+{
+ static int printed_version;
+ const struct mv_sata_platform_data *mv_platform_data;
+ const struct ata_port_info *ppi[] =
+ { &mv_port_info[chip_soc], NULL };
+ struct ata_host *host;
+ struct mv_host_priv *hpriv;
+ struct resource *res;
+ int n_ports, rc;
+
+ if (!printed_version++)
+ dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
+
+ /*
+ * Simple resource validation ..
+ */
+ if (unlikely(pdev->num_resources != 2)) {
+ dev_err(&pdev->dev, "invalid number of resources\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Get the register base first
+ */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL)
+ return -EINVAL;
+
+ /* allocate host */
+ mv_platform_data = pdev->dev.platform_data;
+ n_ports = mv_platform_data->n_ports;
+
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+ hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
+
+ if (!host || !hpriv)
+ return -ENOMEM;
+ host->private_data = hpriv;
+ hpriv->n_ports = n_ports;
+
+ host->iomap = NULL;
+ hpriv->base = devm_ioremap(&pdev->dev, res->start,
+ res->end - res->start + 1);
+ hpriv->base -= MV_SATAHC0_REG_BASE;
+
+ /*
+ * (Re-)program MBUS remapping windows if we are asked to.
+ */
+ if (mv_platform_data->dram != NULL)
+ mv_conf_mbus_windows(hpriv, mv_platform_data->dram);
+
+ rc = mv_create_dma_pools(hpriv, &pdev->dev);
+ if (rc)
+ return rc;
+
+ /* initialize adapter */
+ rc = mv_init_host(host, chip_soc);
+ if (rc)
+ return rc;
+
+ dev_printk(KERN_INFO, &pdev->dev,
+ "slots %u ports %d\n", (unsigned)MV_MAX_Q_DEPTH,
+ host->n_ports);
+
+ return ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt,
+ IRQF_SHARED, &mv6_sht);
+}
+
+/*
+ *
+ * mv_platform_remove - unplug a platform interface
+ * @pdev: platform device
+ *
+ * A platform bus SATA device has been unplugged. Perform the needed
+ * cleanup. Also called on module unload for any active devices.
+ */
+static int __devexit mv_platform_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ata_host *host = dev_get_drvdata(dev);
+
+ ata_host_detach(host);
+ return 0;
+}
+
+static struct platform_driver mv_platform_driver = {
+ .probe = mv_platform_probe,
+ .remove = __devexit_p(mv_platform_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+
+#ifdef CONFIG_PCI
+static int mv_pci_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent);
+
+
+static struct pci_driver mv_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = mv_pci_tbl,
+ .probe = mv_pci_init_one,
+ .remove = ata_pci_remove_one,
+};
+
+/*
+ * module options
+ */
+static int msi; /* Use PCI msi; either zero (off, default) or non-zero */
+
+
+/* move to PCI layer or libata core? */
+static int pci_go_64(struct pci_dev *pdev)
+{
+ int rc;
+
+ if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+ if (rc) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "64-bit DMA enable failed\n");
+ return rc;
+ }
+ }
+ } else {
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
+ return rc;
+ }
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
+ return rc;
+ }
+ }
-done:
return rc;
}
{
struct pci_dev *pdev = to_pci_dev(host->dev);
struct mv_host_priv *hpriv = host->private_data;
- u8 rev_id, scc;
- const char *scc_s;
+ u8 scc;
+ const char *scc_s, *gen;
/* Use this to determine the HW stepping of the chip so we know
* what errata to workaround
*/
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
-
pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc);
if (scc == 0)
scc_s = "SCSI";
else if (scc == 0x01)
scc_s = "RAID";
else
- scc_s = "unknown";
+ scc_s = "?";
+
+ if (IS_GEN_I(hpriv))
+ gen = "I";
+ else if (IS_GEN_II(hpriv))
+ gen = "II";
+ else if (IS_GEN_IIE(hpriv))
+ gen = "IIE";
+ else
+ gen = "?";
dev_printk(KERN_INFO, &pdev->dev,
- "%u slots %u ports %s mode IRQ via %s\n",
- (unsigned)MV_MAX_Q_DEPTH, host->n_ports,
+ "Gen-%s %u slots %u ports %s mode IRQ via %s\n",
+ gen, (unsigned)MV_MAX_Q_DEPTH, host->n_ports,
scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
}
/**
- * mv_init_one - handle a positive probe of a Marvell host
+ * mv_pci_init_one - handle a positive probe of a PCI Marvell host
* @pdev: PCI device found
* @ent: PCI device ID entry for the matched host
*
* LOCKING:
* Inherited from caller.
*/
-static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+static int mv_pci_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
- static int printed_version = 0;
+ static int printed_version;
unsigned int board_idx = (unsigned int)ent->driver_data;
const struct ata_port_info *ppi[] = { &mv_port_info[board_idx], NULL };
struct ata_host *host;
if (!host || !hpriv)
return -ENOMEM;
host->private_data = hpriv;
+ hpriv->n_ports = n_ports;
/* acquire resources */
rc = pcim_enable_device(pdev);
if (rc)
return rc;
host->iomap = pcim_iomap_table(pdev);
+ hpriv->base = host->iomap[MV_PRIMARY_BAR];
rc = pci_go_64(pdev);
if (rc)
return rc;
+ rc = mv_create_dma_pools(hpriv, &pdev->dev);
+ if (rc)
+ return rc;
+
/* initialize adapter */
rc = mv_init_host(host, board_idx);
if (rc)
mv_print_info(host);
pci_set_master(pdev);
+ pci_try_set_mwi(pdev);
return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED,
- &mv_sht);
+ IS_GEN_I(hpriv) ? &mv5_sht : &mv6_sht);
}
+#endif
+
+static int mv_platform_probe(struct platform_device *pdev);
+static int __devexit mv_platform_remove(struct platform_device *pdev);
static int __init mv_init(void)
{
- return pci_register_driver(&mv_pci_driver);
+ int rc = -ENODEV;
+#ifdef CONFIG_PCI
+ rc = pci_register_driver(&mv_pci_driver);
+ if (rc < 0)
+ return rc;
+#endif
+ rc = platform_driver_register(&mv_platform_driver);
+
+#ifdef CONFIG_PCI
+ if (rc < 0)
+ pci_unregister_driver(&mv_pci_driver);
+#endif
+ return rc;
}
static void __exit mv_exit(void)
{
+#ifdef CONFIG_PCI
pci_unregister_driver(&mv_pci_driver);
+#endif
+ platform_driver_unregister(&mv_platform_driver);
}
MODULE_AUTHOR("Brett Russ");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:" DRV_NAME);
+#ifdef CONFIG_PCI
module_param(msi, int, 0444);
MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)");
+#endif
module_init(mv_init);
module_exit(mv_exit);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff