#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_PMP | ATA_FLAG_NCQ),
+ ATA_FLAG_PMP | ATA_FLAG_NCQ | ATA_FLAG_AN),
SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH,
SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */
/*
* SATA-FSL host controller supports a max. of (15+1) direct PRDEs, and
* chained indirect PRDEs upto a max count of 63.
- * We are allocating an array of 63 PRDEs contigiously, but PRDE#15 will
+ * We are allocating an array of 63 PRDEs contiguously, but PRDE#15 will
* be setup as an indirect descriptor, pointing to it's next
- * (contigious) PRDE. Though chained indirect PRDE arrays are
+ * (contiguous) PRDE. Though chained indirect PRDE arrays are
* supported,it will be more efficient to use a direct PRDT and
* a single chain/link to indirect PRDE array/PRDT.
*/
INT_ON_SINGL_DEVICE_ERR = (1 << 1),
INT_ON_CMD_COMPLETE = 1,
- INT_ON_ERROR = INT_ON_FATAL_ERR |
+ INT_ON_ERROR = INT_ON_FATAL_ERR | INT_ON_SNOTIFY_UPDATE |
INT_ON_PHYRDY_CHG | INT_ON_SINGL_DEVICE_ERR,
/*
IE_ON_CMD_COMPLETE = 1,
DEFAULT_PORT_IRQ_ENABLE_MASK = IE_ON_FATAL_ERR | IE_ON_PHYRDY_CHG |
- IE_ON_SIGNATURE_UPDATE |
+ IE_ON_SIGNATURE_UPDATE | IE_ON_SNOTIFY_UPDATE |
IE_ON_SINGL_DEVICE_ERR | IE_ON_CMD_COMPLETE,
EXT_INDIRECT_SEG_PRD_FLAG = (1 << 31),
* Description information bitdefs
*/
enum {
+ CMD_DESC_RES = (1 << 11),
VENDOR_SPECIFIC_BIST = (1 << 10),
CMD_DESC_SNOOP_ENABLE = (1 << 9),
FPDMA_QUEUED_CMD = (1 << 8),
u32 ttl_dwords = 0;
/*
- * NOTE : direct & indirect prdt's are contigiously allocated
+ * NOTE : direct & indirect prdt's are contiguously allocated
*/
struct prde *prd = (struct prde *)&((struct command_desc *)
cmd_desc)->prdt;
dma_addr_t sg_addr = sg_dma_address(sg);
u32 sg_len = sg_dma_len(sg);
- VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%x, sg_len = %d\n",
- sg_addr, sg_len);
+ VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%llx, sg_len = %d\n",
+ (unsigned long long)sg_addr, sg_len);
/* warn if each s/g element is not dword aligned */
if (sg_addr & 0x03)
ata_port_printk(qc->ap, KERN_ERR,
- "s/g addr unaligned : 0x%x\n", sg_addr);
+ "s/g addr unaligned : 0x%llx\n",
+ (unsigned long long)sg_addr);
if (sg_len & 0x03)
ata_port_printk(qc->ap, KERN_ERR,
"s/g len unaligned : 0x%x\n", sg_len);
void __iomem *hcr_base = host_priv->hcr_base;
unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
struct command_desc *cd;
- u32 desc_info = CMD_DESC_SNOOP_ENABLE;
+ u32 desc_info = CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE;
u32 num_prde = 0;
u32 ttl_dwords = 0;
dma_addr_t cd_paddr;
return true;
}
-static int sata_fsl_scr_write(struct ata_port *ap, unsigned int sc_reg_in,
- u32 val)
+static int sata_fsl_scr_write(struct ata_link *link,
+ unsigned int sc_reg_in, u32 val)
{
- struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ struct sata_fsl_host_priv *host_priv = link->ap->host->private_data;
void __iomem *ssr_base = host_priv->ssr_base;
unsigned int sc_reg;
return 0;
}
-static int sata_fsl_scr_read(struct ata_port *ap, unsigned int sc_reg_in,
- u32 *val)
+static int sata_fsl_scr_read(struct ata_link *link,
+ unsigned int sc_reg_in, u32 *val)
{
- struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ struct sata_fsl_host_priv *host_priv = link->ap->host->private_data;
void __iomem *ssr_base = host_priv->ssr_base;
unsigned int sc_reg;
* Workaround for 8315DS board 3gbps link-up issue,
* currently limit SATA port to GEN1 speed
*/
- sata_fsl_scr_read(ap, SCR_CONTROL, &temp);
+ sata_fsl_scr_read(&ap->link, SCR_CONTROL, &temp);
temp &= ~(0xF << 4);
temp |= (0x1 << 4);
- sata_fsl_scr_write(ap, SCR_CONTROL, temp);
+ sata_fsl_scr_write(&ap->link, SCR_CONTROL, temp);
- sata_fsl_scr_read(ap, SCR_CONTROL, &temp);
+ sata_fsl_scr_read(&ap->link, SCR_CONTROL, &temp);
dev_printk(KERN_WARNING, dev, "scr_control, speed limited to %x\n",
temp);
#endif
return ata_dev_classify(&tf);
}
-static int sata_fsl_prereset(struct ata_link *link, unsigned long deadline)
-{
- /* FIXME: Never skip softreset, sata_fsl_softreset() is
- * combination of soft and hard resets. sata_fsl_softreset()
- * needs to be splitted into soft and hard resets.
- */
- return 0;
-}
-
-static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
+static int sata_fsl_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
- struct sata_fsl_port_priv *pp = ap->private_data;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
- int pmp = sata_srst_pmp(link);
u32 temp;
- struct ata_taskfile tf;
- u8 *cfis;
- u32 Serror;
int i = 0;
unsigned long start_jiffies;
- DPRINTK("in xx_softreset\n");
-
- if (pmp != SATA_PMP_CTRL_PORT)
- goto issue_srst;
+ DPRINTK("in xx_hardreset\n");
try_offline_again:
/*
if (temp & ONLINE) {
ata_port_printk(ap, KERN_ERR,
- "Softreset failed, not off-lined %d\n", i);
+ "Hardreset failed, not off-lined %d\n", i);
/*
* Try to offline controller atleast twice
goto try_offline_again;
}
- DPRINTK("softreset, controller off-lined\n");
+ DPRINTK("hardreset, controller off-lined\n");
VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
if (!(temp & ONLINE)) {
ata_port_printk(ap, KERN_ERR,
- "Softreset failed, not on-lined\n");
+ "Hardreset failed, not on-lined\n");
goto err;
}
- DPRINTK("softreset, controller off-lined & on-lined\n");
+ DPRINTK("hardreset, controller off-lined & on-lined\n");
VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
"No Device OR PHYRDY change,Hstatus = 0x%x\n",
ioread32(hcr_base + HSTATUS));
*class = ATA_DEV_NONE;
- goto out;
+ return 0;
}
/*
if ((temp & 0xFF) != 0x18) {
ata_port_printk(ap, KERN_WARNING, "No Signature Update\n");
*class = ATA_DEV_NONE;
- goto out;
+ goto do_followup_srst;
} else {
ata_port_printk(ap, KERN_INFO,
"Signature Update detected @ %d msecs\n",
jiffies_to_msecs(jiffies - start_jiffies));
+ *class = sata_fsl_dev_classify(ap);
+ return 0;
+ }
+
+do_followup_srst:
+ /*
+ * request libATA to perform follow-up softreset
+ */
+ return -EAGAIN;
+
+err:
+ return -EIO;
+}
+
+static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct sata_fsl_port_priv *pp = ap->private_data;
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ int pmp = sata_srst_pmp(link);
+ u32 temp;
+ struct ata_taskfile tf;
+ u8 *cfis;
+ u32 Serror;
+
+ DPRINTK("in xx_softreset\n");
+
+ if (ata_link_offline(link)) {
+ DPRINTK("PHY reports no device\n");
+ *class = ATA_DEV_NONE;
+ return 0;
}
/*
* reached here, we can send a command to the target device
*/
-issue_srst:
DPRINTK("Sending SRST/device reset\n");
ata_tf_init(link->device, &tf);
/* device reset/SRST is a control register update FIS, uses tag0 */
sata_fsl_setup_cmd_hdr_entry(pp, 0,
- SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
+ SRST_CMD | CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */
ata_tf_to_fis(&tf, pmp, 0, cfis);
ioread32(CA + hcr_base), ioread32(CC + hcr_base));
iowrite32(0xFFFF, CC + hcr_base);
+ if (pmp != SATA_PMP_CTRL_PORT)
+ iowrite32(pmp, CQPMP + hcr_base);
iowrite32(1, CQ + hcr_base);
temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000);
ioread32(CQ + hcr_base),
ioread32(CA + hcr_base), ioread32(CC + hcr_base));
- sata_fsl_scr_read(ap, SCR_ERROR, &Serror);
+ sata_fsl_scr_read(&ap->link, SCR_ERROR, &Serror);
DPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
DPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
* using ATA signature D2H register FIS to the host controller.
*/
- sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
+ sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE,
+ 0, 0, 5);
tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */
ata_tf_to_fis(&tf, pmp, 0, cfis);
VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE));
}
-out:
return 0;
err:
* Handle & Clear SError
*/
- sata_fsl_scr_read(ap, SCR_ERROR, &SError);
- if (unlikely(SError & 0xFFFF0000)) {
- sata_fsl_scr_write(ap, SCR_ERROR, SError);
- }
+ sata_fsl_scr_read(&ap->link, SCR_ERROR, &SError);
+ if (unlikely(SError & 0xFFFF0000))
+ sata_fsl_scr_write(&ap->link, SCR_ERROR, SError);
DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n",
hstatus, cereg, ioread32(hcr_base + DE), SError);
ehi->err_mask |= AC_ERR_ATA_BUS;
ehi->action |= ATA_EH_SOFTRESET;
- /*
- * Ignore serror in case of fatal errors as we always want
- * to do a soft-reset of the FSL SATA controller. Analyzing
- * serror may cause libata to schedule a hard-reset action,
- * and hard-reset currently does not do controller
- * offline/online, causing command timeouts and leads to an
- * un-recoverable state, hence make libATA ignore
- * autopsy in case of fatal errors.
- */
-
- ehi->flags |= ATA_EHI_NO_AUTOPSY;
-
freeze = 1;
}
+ /* Handle SDB FIS receive & notify update */
+ if (hstatus & INT_ON_SNOTIFY_UPDATE)
+ sata_async_notification(ap);
+
/* Handle PHYRDY change notification */
if (hstatus & INT_ON_PHYRDY_CHG) {
DPRINTK("SATA FSL: PHYRDY change indication\n");
}
/* record error info */
- if (qc) {
+ if (qc)
qc->err_mask |= err_mask;
- } else
+ else
ehi->err_mask |= err_mask;
ehi->action |= action;
hstatus = ioread32(hcr_base + HSTATUS);
- sata_fsl_scr_read(ap, SCR_ERROR, &SError);
+ sata_fsl_scr_read(&ap->link, SCR_ERROR, &SError);
if (unlikely(SError & 0xFFFF0000)) {
DPRINTK("serror @host_intr : 0x%x\n", SError);
sata_fsl_error_intr(ap);
-
}
if (unlikely(hstatus & INT_ON_ERROR)) {
static struct ata_port_operations sata_fsl_ops = {
.inherits = &sata_pmp_port_ops,
+ .qc_defer = ata_std_qc_defer,
.qc_prep = sata_fsl_qc_prep,
.qc_issue = sata_fsl_qc_issue,
.qc_fill_rtf = sata_fsl_qc_fill_rtf,
.freeze = sata_fsl_freeze,
.thaw = sata_fsl_thaw,
- .prereset = sata_fsl_prereset,
.softreset = sata_fsl_softreset,
+ .hardreset = sata_fsl_hardreset,
.pmp_softreset = sata_fsl_softreset,
.error_handler = sata_fsl_error_handler,
.post_internal_cmd = sata_fsl_post_internal_cmd,
static const struct ata_port_info sata_fsl_port_info[] = {
{
.flags = SATA_FSL_HOST_FLAGS,
- .pio_mask = 0x1f, /* pio 0-4 */
- .udma_mask = 0x7f, /* udma 0-6 */
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
.port_ops = &sata_fsl_ops,
},
};
static int sata_fsl_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
- int retval = 0;
+ int retval = -ENXIO;
void __iomem *hcr_base = NULL;
void __iomem *ssr_base = NULL;
void __iomem *csr_base = NULL;
dev_printk(KERN_INFO, &ofdev->dev,
"Sata FSL Platform/CSB Driver init\n");
- hcr_base = of_iomap(ofdev->node, 0);
+ hcr_base = of_iomap(ofdev->dev.of_node, 0);
if (!hcr_base)
goto error_exit_with_cleanup;
host_priv->ssr_base = ssr_base;
host_priv->csr_base = csr_base;
- irq = irq_of_parse_and_map(ofdev->node, 0);
+ irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
if (irq < 0) {
dev_printk(KERN_ERR, &ofdev->dev, "invalid irq from platform\n");
goto error_exit_with_cleanup;
return 0;
}
+#ifdef CONFIG_PM
+static int sata_fsl_suspend(struct of_device *op, pm_message_t state)
+{
+ struct ata_host *host = dev_get_drvdata(&op->dev);
+ return ata_host_suspend(host, state);
+}
+
+static int sata_fsl_resume(struct of_device *op)
+{
+ struct ata_host *host = dev_get_drvdata(&op->dev);
+ struct sata_fsl_host_priv *host_priv = host->private_data;
+ int ret;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ struct ata_port *ap = host->ports[0];
+ struct sata_fsl_port_priv *pp = ap->private_data;
+
+ ret = sata_fsl_init_controller(host);
+ if (ret) {
+ dev_printk(KERN_ERR, &op->dev,
+ "Error initialize hardware\n");
+ return ret;
+ }
+
+ /* Recovery the CHBA register in host controller cmd register set */
+ iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA);
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
static struct of_device_id fsl_sata_match[] = {
{
.compatible = "fsl,pq-sata",
MODULE_DEVICE_TABLE(of, fsl_sata_match);
static struct of_platform_driver fsl_sata_driver = {
- .name = "fsl-sata",
- .match_table = fsl_sata_match,
+ .driver = {
+ .name = "fsl-sata",
+ .owner = THIS_MODULE,
+ .of_match_table = fsl_sata_match,
+ },
.probe = sata_fsl_probe,
.remove = sata_fsl_remove,
+#ifdef CONFIG_PM
+ .suspend = sata_fsl_suspend,
+ .resume = sata_fsl_resume,
+#endif
};
static int __init sata_fsl_init(void)