/*
* pata_sil680.c - SIL680 PATA for new ATA layer
* (C) 2005 Red Hat Inc
- * Alan Cox <alan@redhat.com>
*
* based upon
*
#include <linux/libata.h>
#define DRV_NAME "pata_sil680"
-#define DRV_VERSION "0.4.7"
+#define DRV_VERSION "0.4.9"
#define SIL680_MMIO_BAR 5
}
/**
- * sil680_bus_reset - reset the SIL680 bus
- * @link: ATA link to reset
- * @deadline: deadline jiffies for the operation
- *
- * Perform the SIL680 housekeeping when doing an ATA bus reset
- */
-
-static int sil680_bus_reset(struct ata_link *link, unsigned int *classes,
- unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- unsigned long addr = sil680_selreg(ap, 0);
- u8 reset;
-
- pci_read_config_byte(pdev, addr, &reset);
- pci_write_config_byte(pdev, addr, reset | 0x03);
- udelay(25);
- pci_write_config_byte(pdev, addr, reset);
- return ata_std_softreset(link, classes, deadline);
-}
-
-static void sil680_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, ata_std_prereset, sil680_bus_reset, NULL, ata_std_postreset);
-}
-
-/**
* sil680_set_piomode - set initial PIO mode data
* @ap: ATA interface
* @adev: ATA device
}
static struct scsi_host_template sil680_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations sil680_port_ops = {
+ .inherits = &ata_bmdma32_port_ops,
+ .cable_detect = sil680_cable_detect,
.set_piomode = sil680_set_piomode,
.set_dmamode = sil680_set_dmamode,
- .mode_filter = ata_pci_default_filter,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = sil680_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = sil680_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
/**
dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
tmpbyte & 1, tmpbyte & 0x30);
- *try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
+ *try_mmio = 0;
+#ifdef CONFIG_PPC
+ if (machine_is(cell))
+ *try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
+#endif
switch(tmpbyte & 0x30) {
case 0x00:
const struct pci_device_id *id)
{
static const struct ata_port_info info = {
- .sht = &sil680_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &sil680_port_ops
};
static const struct ata_port_info info_slow = {
- .sht = &sil680_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
switch (sil680_init_chip(pdev, &try_mmio)) {
case 0:
ppi[0] = &info_slow;
/* Try to acquire MMIO resources and fallback to PIO if
* that fails
*/
- rc = pcim_enable_device(pdev);
- if (rc)
- return rc;
rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
if (rc)
goto use_ioports;
host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80;
host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a;
host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a;
- ata_std_ports(&host->ports[0]->ioaddr);
+ ata_sff_std_ports(&host->ports[0]->ioaddr);
host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08;
host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0;
host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca;
host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca;
- ata_std_ports(&host->ports[1]->ioaddr);
+ ata_sff_std_ports(&host->ports[1]->ioaddr);
/* Register & activate */
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &sil680_sht);
+ return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ IRQF_SHARED, &sil680_sht);
use_ioports:
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL);
}
#ifdef CONFIG_PM
static int sil680_reinit_one(struct pci_dev *pdev)
{
- int try_mmio;
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int try_mmio, rc;
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
sil680_init_chip(pdev, &try_mmio);
- return ata_pci_device_resume(pdev);
+ ata_host_resume(host);
+ return 0;
}
#endif