/*
* pata_sil680.c - SIL680 PATA for new ATA layer
* (C) 2005 Red Hat Inc
- * Alan Cox <alan@redhat.com>
*
* based upon
*
#include <linux/libata.h>
#define DRV_NAME "pata_sil680"
-#define DRV_VERSION "0.4.8"
+#define DRV_VERSION "0.4.9"
#define SIL680_MMIO_BAR 5
};
static struct ata_port_operations sil680_port_ops = {
+ .inherits = &ata_bmdma32_port_ops,
+ .cable_detect = sil680_cable_detect,
.set_piomode = sil680_set_piomode,
.set_dmamode = sil680_set_dmamode,
- .mode_filter = ata_pci_default_filter,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = sil680_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
/**
tmpbyte & 1, tmpbyte & 0x30);
*try_mmio = 0;
-#ifdef CONFIG_PPC_MERGE
+#ifdef CONFIG_PPC
if (machine_is(cell))
*try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
#endif
const struct pci_device_id *id)
{
static const struct ata_port_info info = {
- .sht = &sil680_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &sil680_port_ops
};
static const struct ata_port_info info_slow = {
- .sht = &sil680_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
/* Try to acquire MMIO resources and fallback to PIO if
* that fails
*/
- rc = pcim_enable_device(pdev);
- if (rc)
- return rc;
rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
if (rc)
goto use_ioports;
host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80;
host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a;
host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a;
- ata_std_ports(&host->ports[0]->ioaddr);
+ ata_sff_std_ports(&host->ports[0]->ioaddr);
host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08;
host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0;
host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca;
host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca;
- ata_std_ports(&host->ports[1]->ioaddr);
+ ata_sff_std_ports(&host->ports[1]->ioaddr);
/* Register & activate */
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &sil680_sht);
+ return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ IRQF_SHARED, &sil680_sht);
use_ioports:
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL);
}
#ifdef CONFIG_PM