pata_hpt3x2n: fix cable detection

[safe/jmp/linux-2.6] / drivers / ata / pata_sil680.c

diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 7c5b2dd..4cb649d 100644 (file)
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -1,7 +1,6 @@
 /*
  * pata_sil680.c       - SIL680 PATA for new ATA layer
  *                       (C) 2005 Red Hat Inc
- *                       Alan Cox <alan@redhat.com>
  *
  * based upon
  *
@@ -33,7 +32,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_sil680"
-#define DRV_VERSION "0.4.8"
+#define DRV_VERSION "0.4.9"
 
 #define SIL680_MMIO_BAR                5
 
@@ -192,54 +191,14 @@ static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template sil680_sht = {
-       .module                 = THIS_MODULE,
-       .name                   = DRV_NAME,
-       .ioctl                  = ata_scsi_ioctl,
-       .queuecommand           = ata_scsi_queuecmd,
-       .can_queue              = ATA_DEF_QUEUE,
-       .this_id                = ATA_SHT_THIS_ID,
-       .sg_tablesize           = LIBATA_MAX_PRD,
-       .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
-       .emulated               = ATA_SHT_EMULATED,
-       .use_clustering         = ATA_SHT_USE_CLUSTERING,
-       .proc_name              = DRV_NAME,
-       .dma_boundary           = ATA_DMA_BOUNDARY,
-       .slave_configure        = ata_scsi_slave_config,
-       .slave_destroy          = ata_scsi_slave_destroy,
-       .bios_param             = ata_std_bios_param,
+       ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations sil680_port_ops = {
+       .inherits       = &ata_bmdma32_port_ops,
+       .cable_detect   = sil680_cable_detect,
        .set_piomode    = sil680_set_piomode,
        .set_dmamode    = sil680_set_dmamode,
-       .mode_filter    = ata_pci_default_filter,
-       .tf_load        = ata_tf_load,
-       .tf_read        = ata_tf_read,
-       .check_status   = ata_check_status,
-       .exec_command   = ata_exec_command,
-       .dev_select     = ata_std_dev_select,
-
-       .freeze         = ata_bmdma_freeze,
-       .thaw           = ata_bmdma_thaw,
-       .error_handler  = ata_bmdma_error_handler,
-       .post_internal_cmd = ata_bmdma_post_internal_cmd,
-       .cable_detect   = sil680_cable_detect,
-
-       .bmdma_setup    = ata_bmdma_setup,
-       .bmdma_start    = ata_bmdma_start,
-       .bmdma_stop     = ata_bmdma_stop,
-       .bmdma_status   = ata_bmdma_status,
-
-       .qc_prep        = ata_qc_prep,
-       .qc_issue       = ata_qc_issue_prot,
-
-       .data_xfer      = ata_data_xfer,
-
-       .irq_handler    = ata_interrupt,
-       .irq_clear      = ata_bmdma_irq_clear,
-       .irq_on         = ata_irq_on,
-
-       .port_start     = ata_sff_port_start,
 };
 
 /**
@@ -270,7 +229,7 @@ static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
                tmpbyte & 1, tmpbyte & 0x30);
 
        *try_mmio = 0;
-#ifdef CONFIG_PPC_MERGE
+#ifdef CONFIG_PPC
        if (machine_is(cell))
                *try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
 #endif
@@ -322,18 +281,16 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
                                     const struct pci_device_id *id)
 {
        static const struct ata_port_info info = {
-               .sht = &sil680_sht,
                .flags = ATA_FLAG_SLAVE_POSS,
-               .pio_mask = 0x1f,
-               .mwdma_mask = 0x07,
+               .pio_mask = ATA_PIO4,
+               .mwdma_mask = ATA_MWDMA2,
                .udma_mask = ATA_UDMA6,
                .port_ops = &sil680_port_ops
        };
        static const struct ata_port_info info_slow = {
-               .sht = &sil680_sht,
                .flags = ATA_FLAG_SLAVE_POSS,
-               .pio_mask = 0x1f,
-               .mwdma_mask = 0x07,
+               .pio_mask = ATA_PIO4,
+               .mwdma_mask = ATA_MWDMA2,
                .udma_mask = ATA_UDMA5,
                .port_ops = &sil680_port_ops
        };
@@ -346,6 +303,10 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
        if (!printed_version++)
                dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+       rc = pcim_enable_device(pdev);
+       if (rc)
+               return rc;
+
        switch (sil680_init_chip(pdev, &try_mmio)) {
                case 0:
                        ppi[0] = &info_slow;
@@ -360,9 +321,6 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
        /* Try to acquire MMIO resources and fallback to PIO if
         * that fails
         */
-       rc = pcim_enable_device(pdev);
-       if (rc)
-               return rc;
        rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
        if (rc)
                goto use_ioports;
@@ -388,28 +346,33 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
        host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80;
        host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a;
        host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a;
-       ata_std_ports(&host->ports[0]->ioaddr);
+       ata_sff_std_ports(&host->ports[0]->ioaddr);
        host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08;
        host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0;
        host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca;
        host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca;
-       ata_std_ports(&host->ports[1]->ioaddr);
+       ata_sff_std_ports(&host->ports[1]->ioaddr);
 
        /* Register & activate */
-       return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
-                                &sil680_sht);
+       return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+                                IRQF_SHARED, &sil680_sht);
 
 use_ioports:
-       return ata_pci_init_one(pdev, ppi);
+       return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL);
 }
 
 #ifdef CONFIG_PM
 static int sil680_reinit_one(struct pci_dev *pdev)
 {
-       int try_mmio;
+       struct ata_host *host = dev_get_drvdata(&pdev->dev);
+       int try_mmio, rc;
 
+       rc = ata_pci_device_do_resume(pdev);
+       if (rc)
+               return rc;
        sil680_init_chip(pdev, &try_mmio);
-       return ata_pci_device_resume(pdev);
+       ata_host_resume(host);
+       return 0;
 }
 #endif