* Copyright 2003-2005 Jeff Garzik
* Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
+ * Copyright (C) 2003 Red Hat Inc
*
* and drivers/ata/ahci.c:
* Copyright 2004-2005 Red Hat, Inc.
#include <linux/libata.h>
#define DRV_NAME "pata_scc"
-#define DRV_VERSION "0.2"
+#define DRV_VERSION "0.3"
#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
* scc_set_dmamode - Initialize host controller PATA DMA timings
* @ap: Port whose timings we are configuring
* @adev: um
- * @udma: udma mode, 0 - 6
*
* Set UDMA mode for device.
*
JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]);
}
+unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask)
+{
+ /* errata A308 workaround: limit ATAPI UDMA mode to UDMA4 */
+ if (adev->class == ATA_DEV_ATAPI &&
+ (mask & (0xE0 << ATA_SHIFT_UDMA))) {
+ printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME);
+ mask &= ~(0xE0 << ATA_SHIFT_UDMA);
+ }
+ return ata_bmdma_mode_filter(adev, mask);
+}
+
/**
* scc_tf_load - send taskfile registers to host controller
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
*
- * Note: Original code is ata_tf_load().
+ * Note: Original code is ata_sff_tf_load().
*/
static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf)
* @ap: Port from which input is read
* @tf: ATA taskfile register set for storing input
*
- * Note: Original code is ata_tf_read().
+ * Note: Original code is ata_sff_tf_read().
*/
static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf)
tf->hob_lbal = in_be32(ioaddr->lbal_addr);
tf->hob_lbam = in_be32(ioaddr->lbam_addr);
tf->hob_lbah = in_be32(ioaddr->lbah_addr);
+ out_be32(ioaddr->ctl_addr, tf->ctl);
+ ap->last_ctl = tf->ctl;
}
}
* @ap: port to which command is being issued
* @tf: ATA taskfile register set
*
- * Note: Original code is ata_exec_command().
+ * Note: Original code is ata_sff_exec_command().
*/
static void scc_exec_command (struct ata_port *ap,
DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
out_be32(ap->ioaddr.command_addr, tf->command);
- ata_pause(ap);
+ ata_sff_pause(ap);
}
/**
}
/**
- * scc_std_dev_select - Select device 0/1 on ATA bus
+ * scc_dev_select - Select device 0/1 on ATA bus
* @ap: ATA channel to manipulate
* @device: ATA device (numbered from zero) to select
*
- * Note: Original code is ata_std_dev_select().
+ * Note: Original code is ata_sff_dev_select().
*/
-static void scc_std_dev_select (struct ata_port *ap, unsigned int device)
+static void scc_dev_select (struct ata_port *ap, unsigned int device)
{
u8 tmp;
tmp = ATA_DEVICE_OBS | ATA_DEV1;
out_be32(ap->ioaddr.device_addr, tmp);
- ata_pause(ap);
+ ata_sff_pause(ap);
}
/**
out_be32(mmio + SCC_DMA_CMD, dmactl);
/* issue r/w command */
- ap->ops->exec_command(ap, &qc->tf);
+ ap->ops->sff_exec_command(ap, &qc->tf);
}
/**
struct ata_ioports *ioaddr = &ap->ioaddr;
u8 nsect, lbal;
- ap->ops->dev_select(ap, device);
+ ap->ops->sff_dev_select(ap, device);
out_be32(ioaddr->nsect_addr, 0x55);
out_be32(ioaddr->lbal_addr, 0xaa);
}
/**
- * scc_bus_post_reset - PATA device post reset
+ * scc_wait_after_reset - wait for devices to become ready after reset
*
- * Note: Original code is ata_bus_post_reset().
+ * Note: Original code is ata_sff_wait_after_reset
*/
-static int scc_bus_post_reset(struct ata_port *ap, unsigned int devmask,
- unsigned long deadline)
+int scc_wait_after_reset(struct ata_link *link, unsigned int devmask,
+ unsigned long deadline)
{
+ struct ata_port *ap = link->ap;
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int dev0 = devmask & (1 << 0);
unsigned int dev1 = devmask & (1 << 1);
- int rc;
+ int rc, ret = 0;
- /* if device 0 was found in ata_devchk, wait for its
- * BSY bit to clear
+ /* Spec mandates ">= 2ms" before checking status. We wait
+ * 150ms, because that was the magic delay used for ATAPI
+ * devices in Hale Landis's ATADRVR, for the period of time
+ * between when the ATA command register is written, and then
+ * status is checked. Because waiting for "a while" before
+ * checking status is fine, post SRST, we perform this magic
+ * delay here as well.
+ *
+ * Old drivers/ide uses the 2mS rule and then waits for ready.
*/
- if (dev0) {
- rc = ata_wait_ready(ap, deadline);
- if (rc && rc != -ENODEV)
- return rc;
- }
+ msleep(150);
- /* if device 1 was found in ata_devchk, wait for
- * register access, then wait for BSY to clear
+ /* always check readiness of the master device */
+ rc = ata_sff_wait_ready(link, deadline);
+ /* -ENODEV means the odd clown forgot the D7 pulldown resistor
+ * and TF status is 0xff, bail out on it too.
*/
- while (dev1) {
- u8 nsect, lbal;
+ if (rc)
+ return rc;
- ap->ops->dev_select(ap, 1);
- nsect = in_be32(ioaddr->nsect_addr);
- lbal = in_be32(ioaddr->lbal_addr);
- if ((nsect == 1) && (lbal == 1))
- break;
- if (time_after(jiffies, deadline))
- return -EBUSY;
- msleep(50); /* give drive a breather */
- }
+ /* if device 1 was found in ata_devchk, wait for register
+ * access briefly, then wait for BSY to clear.
+ */
if (dev1) {
- rc = ata_wait_ready(ap, deadline);
- if (rc && rc != -ENODEV)
- return rc;
+ int i;
+
+ ap->ops->sff_dev_select(ap, 1);
+
+ /* Wait for register access. Some ATAPI devices fail
+ * to set nsect/lbal after reset, so don't waste too
+ * much time on it. We're gonna wait for !BSY anyway.
+ */
+ for (i = 0; i < 2; i++) {
+ u8 nsect, lbal;
+
+ nsect = in_be32(ioaddr->nsect_addr);
+ lbal = in_be32(ioaddr->lbal_addr);
+ if ((nsect == 1) && (lbal == 1))
+ break;
+ msleep(50); /* give drive a breather */
+ }
+
+ rc = ata_sff_wait_ready(link, deadline);
+ if (rc) {
+ if (rc != -ENODEV)
+ return rc;
+ ret = rc;
+ }
}
/* is all this really necessary? */
- ap->ops->dev_select(ap, 0);
+ ap->ops->sff_dev_select(ap, 0);
if (dev1)
- ap->ops->dev_select(ap, 1);
+ ap->ops->sff_dev_select(ap, 1);
if (dev0)
- ap->ops->dev_select(ap, 0);
+ ap->ops->sff_dev_select(ap, 0);
- return 0;
+ return ret;
}
/**
udelay(20);
out_be32(ioaddr->ctl_addr, ap->ctl);
- /* spec mandates ">= 2ms" before checking status.
- * We wait 150ms, because that was the magic delay used for
- * ATAPI devices in Hale Landis's ATADRVR, for the period of time
- * between when the ATA command register is written, and then
- * status is checked. Because waiting for "a while" before
- * checking status is fine, post SRST, we perform this magic
- * delay here as well.
- *
- * Old drivers/ide uses the 2mS rule and then waits for ready
- */
- msleep(150);
-
- /* Before we perform post reset processing we want to see if
- * the bus shows 0xFF because the odd clown forgets the D7
- * pulldown resistor.
- */
- if (scc_check_status(ap) == 0xFF)
- return 0;
-
- scc_bus_post_reset(ap, devmask, deadline);
+ scc_wait_after_reset(&ap->link, devmask, deadline);
return 0;
}
/**
- * scc_std_softreset - reset host port via ATA SRST
+ * scc_softreset - reset host port via ATA SRST
* @ap: port to reset
* @classes: resulting classes of attached devices
* @deadline: deadline jiffies for the operation
*
- * Note: Original code is ata_std_softreset().
+ * Note: Original code is ata_sff_softreset().
*/
-static int scc_std_softreset (struct ata_port *ap, unsigned int *classes,
- unsigned long deadline)
+static int scc_softreset(struct ata_link *link, unsigned int *classes,
+ unsigned long deadline)
{
+ struct ata_port *ap = link->ap;
unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
unsigned int devmask = 0, err_mask;
u8 err;
DPRINTK("ENTER\n");
- if (ata_port_offline(ap)) {
- classes[0] = ATA_DEV_NONE;
- goto out;
- }
-
/* determine if device 0/1 are present */
if (scc_devchk(ap, 0))
devmask |= (1 << 0);
devmask |= (1 << 1);
/* select device 0 again */
- ap->ops->dev_select(ap, 0);
+ ap->ops->sff_dev_select(ap, 0);
/* issue bus reset */
DPRINTK("about to softreset, devmask=%x\n", devmask);
}
/* determine by signature whether we have ATA or ATAPI devices */
- classes[0] = ata_dev_try_classify(ap, 0, &err);
+ classes[0] = ata_sff_dev_classify(&ap->link.device[0],
+ devmask & (1 << 0), &err);
if (slave_possible && err != 0x81)
- classes[1] = ata_dev_try_classify(ap, 1, &err);
+ classes[1] = ata_sff_dev_classify(&ap->link.device[1],
+ devmask & (1 << 1), &err);
- out:
DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
return 0;
}
if (reg & INTSTS_BMSINT) {
unsigned int classes;
- unsigned long deadline = jiffies + ATA_TMOUT_BOOT;
+ unsigned long deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT);
printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME);
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT);
/* TBD: SW reset */
- scc_std_softreset(ap, &classes, deadline);
+ scc_softreset(&ap->link, &classes, deadline);
continue;
}
in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_altstatus(ap); /* dummy read */
+ ata_sff_dma_pause(ap); /* dummy read */
}
/**
static u8 scc_bmdma_status (struct ata_port *ap)
{
- u8 host_stat;
void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
- host_stat = in_be32(mmio + SCC_DMA_STATUS);
-
- /* Workaround for PTERADD: emulate DMA_INTR when
- * - IDE_STATUS[ERR] = 1
- * - INT_STATUS[INTRQ] = 1
- * - DMA_STATUS[IORACTA] = 1
- */
- if (!(host_stat & ATA_DMA_INTR)) {
- u32 int_status = in_be32(mmio + SCC_DMA_INTST);
- if (ata_altstatus(ap) & ATA_ERR &&
- int_status & INTSTS_INTRQ &&
- host_stat & ATA_DMA_ACTIVE)
- host_stat |= ATA_DMA_INTR;
+ u8 host_stat = in_be32(mmio + SCC_DMA_STATUS);
+ u32 int_status = in_be32(mmio + SCC_DMA_INTST);
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ static int retry = 0;
+
+ /* return if IOS_SS is cleared */
+ if (!(in_be32(mmio + SCC_DMA_CMD) & ATA_DMA_START))
+ return host_stat;
+
+ /* errata A252,A308 workaround: Step4 */
+ if ((scc_check_altstatus(ap) & ATA_ERR)
+ && (int_status & INTSTS_INTRQ))
+ return (host_stat | ATA_DMA_INTR);
+
+ /* errata A308 workaround Step5 */
+ if (int_status & INTSTS_IOIRQS) {
+ host_stat |= ATA_DMA_INTR;
+
+ /* We don't check ATAPI DMA because it is limited to UDMA4 */
+ if ((qc->tf.protocol == ATA_PROT_DMA &&
+ qc->dev->xfer_mode > XFER_UDMA_4)) {
+ if (!(int_status & INTSTS_ACTEINT)) {
+ printk(KERN_WARNING "ata%u: operation failed (transfer data loss)\n",
+ ap->print_id);
+ host_stat |= ATA_DMA_ERR;
+ if (retry++)
+ ap->udma_mask &= ~(1 << qc->dev->xfer_mode);
+ } else
+ retry = 0;
+ }
}
return host_stat;
/**
* scc_data_xfer - Transfer data by PIO
- * @adev: device for this I/O
+ * @dev: device for this I/O
* @buf: data buffer
* @buflen: buffer length
- * @write_data: read/write
+ * @rw: read/write
*
- * Note: Original code is ata_data_xfer().
+ * Note: Original code is ata_sff_data_xfer().
*/
-static void scc_data_xfer (struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int write_data)
+static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
+ unsigned int buflen, int rw)
{
- struct ata_port *ap = adev->ap;
+ struct ata_port *ap = dev->link->ap;
unsigned int words = buflen >> 1;
unsigned int i;
- u16 *buf16 = (u16 *) buf;
+ __le16 *buf16 = (__le16 *) buf;
void __iomem *mmio = ap->ioaddr.data_addr;
/* Transfer multiple of 2 bytes */
- if (write_data) {
+ if (rw == READ)
for (i = 0; i < words; i++)
- out_be32(mmio, cpu_to_le16(buf16[i]));
- } else {
+ buf16[i] = cpu_to_le16(in_be32(mmio));
+ else
for (i = 0; i < words; i++)
- buf16[i] = le16_to_cpu(in_be32(mmio));
- }
+ out_be32(mmio, le16_to_cpu(buf16[i]));
/* Transfer trailing 1 byte, if any. */
if (unlikely(buflen & 0x01)) {
- u16 align_buf[1] = { 0 };
+ __le16 align_buf[1] = { 0 };
unsigned char *trailing_buf = buf + buflen - 1;
- if (write_data) {
- memcpy(align_buf, trailing_buf, 1);
- out_be32(mmio, cpu_to_le16(align_buf[0]));
- } else {
- align_buf[0] = le16_to_cpu(in_be32(mmio));
+ if (rw == READ) {
+ align_buf[0] = cpu_to_le16(in_be32(mmio));
memcpy(trailing_buf, align_buf, 1);
+ } else {
+ memcpy(align_buf, trailing_buf, 1);
+ out_be32(mmio, le16_to_cpu(align_buf[0]));
}
+ words++;
}
+
+ return words << 1;
}
/**
* scc_irq_on - Enable interrupts on a port.
* @ap: Port on which interrupts are enabled.
*
- * Note: Original code is ata_irq_on().
+ * Note: Original code is ata_sff_irq_on().
*/
static u8 scc_irq_on (struct ata_port *ap)
out_be32(ioaddr->ctl_addr, ap->ctl);
tmp = ata_wait_idle(ap);
- ap->ops->irq_clear(ap);
+ ap->ops->sff_irq_clear(ap);
return tmp;
}
/**
- * scc_irq_ack - Acknowledge a device interrupt.
- * @ap: Port on which interrupts are enabled.
- *
- * Note: Original code is ata_irq_ack().
- */
-
-static u8 scc_irq_ack (struct ata_port *ap, unsigned int chk_drq)
-{
- unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
- u8 host_stat, post_stat, status;
-
- status = ata_busy_wait(ap, bits, 1000);
- if (status & bits)
- if (ata_msg_err(ap))
- printk(KERN_ERR "abnormal status 0x%X\n", status);
-
- /* get controller status; clear intr, err bits */
- host_stat = in_be32(ap->ioaddr.bmdma_addr + SCC_DMA_STATUS);
- out_be32(ap->ioaddr.bmdma_addr + SCC_DMA_STATUS,
- host_stat | ATA_DMA_INTR | ATA_DMA_ERR);
-
- post_stat = in_be32(ap->ioaddr.bmdma_addr + SCC_DMA_STATUS);
-
- if (ata_msg_intr(ap))
- printk(KERN_INFO "%s: irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n",
- __FUNCTION__,
- host_stat, post_stat, status);
-
- return status;
-}
-
-/**
- * scc_bmdma_freeze - Freeze BMDMA controller port
+ * scc_freeze - Freeze BMDMA controller port
* @ap: port to freeze
*
- * Note: Original code is ata_bmdma_freeze().
+ * Note: Original code is ata_sff_freeze().
*/
-static void scc_bmdma_freeze (struct ata_port *ap)
+static void scc_freeze (struct ata_port *ap)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
* ATA_NIEN manipulation. Also, many controllers fail to mask
* previously pending IRQ on ATA_NIEN assertion. Clear it.
*/
- ata_chk_status(ap);
+ ap->ops->sff_check_status(ap);
- ap->ops->irq_clear(ap);
+ ap->ops->sff_irq_clear(ap);
}
/**
* @deadline: deadline jiffies for the operation
*/
-static int scc_pata_prereset(struct ata_port *ap, unsigned long deadline)
+static int scc_pata_prereset(struct ata_link *link, unsigned long deadline)
{
- ap->cbl = ATA_CBL_PATA80;
- return ata_std_prereset(ap, deadline);
+ link->ap->cbl = ATA_CBL_PATA80;
+ return ata_sff_prereset(link, deadline);
}
/**
- * scc_std_postreset - standard postreset callback
+ * scc_postreset - standard postreset callback
* @ap: the target ata_port
* @classes: classes of attached devices
*
- * Note: Original code is ata_std_postreset().
+ * Note: Original code is ata_sff_postreset().
*/
-static void scc_std_postreset (struct ata_port *ap, unsigned int *classes)
+static void scc_postreset(struct ata_link *link, unsigned int *classes)
{
- DPRINTK("ENTER\n");
+ struct ata_port *ap = link->ap;
- /* re-enable interrupts */
- if (!ap->ops->error_handler)
- ap->ops->irq_on(ap);
+ DPRINTK("ENTER\n");
/* is double-select really necessary? */
if (classes[0] != ATA_DEV_NONE)
- ap->ops->dev_select(ap, 1);
+ ap->ops->sff_dev_select(ap, 1);
if (classes[1] != ATA_DEV_NONE)
- ap->ops->dev_select(ap, 0);
+ ap->ops->sff_dev_select(ap, 0);
/* bail out if no device is present */
if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
}
/**
- * scc_error_handler - Stock error handler for BMDMA controller
- * @ap: port to handle error for
- */
-
-static void scc_error_handler (struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, scc_pata_prereset, scc_std_softreset, NULL,
- scc_std_postreset);
-}
-
-/**
- * scc_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ * scc_irq_clear - Clear PCI IDE BMDMA interrupt.
* @ap: Port associated with this ATA transaction.
*
- * Note: Original code is ata_bmdma_irq_clear().
+ * Note: Original code is ata_sff_irq_clear().
*/
-static void scc_bmdma_irq_clear (struct ata_port *ap)
+static void scc_irq_clear (struct ata_port *ap)
{
void __iomem *mmio = ap->ioaddr.bmdma_addr;
}
static struct scsi_host_template scc_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations scc_pata_ops = {
- .port_disable = ata_port_disable,
+static struct ata_port_operations scc_pata_ops = {
+ .inherits = &ata_bmdma_port_ops,
+
.set_piomode = scc_set_piomode,
.set_dmamode = scc_set_dmamode,
- .mode_filter = ata_pci_default_filter,
+ .mode_filter = scc_mode_filter,
- .tf_load = scc_tf_load,
- .tf_read = scc_tf_read,
- .exec_command = scc_exec_command,
- .check_status = scc_check_status,
- .check_altstatus = scc_check_altstatus,
- .dev_select = scc_std_dev_select,
+ .sff_tf_load = scc_tf_load,
+ .sff_tf_read = scc_tf_read,
+ .sff_exec_command = scc_exec_command,
+ .sff_check_status = scc_check_status,
+ .sff_check_altstatus = scc_check_altstatus,
+ .sff_dev_select = scc_dev_select,
.bmdma_setup = scc_bmdma_setup,
.bmdma_start = scc_bmdma_start,
.bmdma_stop = scc_bmdma_stop,
.bmdma_status = scc_bmdma_status,
- .data_xfer = scc_data_xfer,
+ .sff_data_xfer = scc_data_xfer,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .freeze = scc_bmdma_freeze,
- .error_handler = scc_error_handler,
+ .freeze = scc_freeze,
+ .prereset = scc_pata_prereset,
+ .softreset = scc_softreset,
+ .postreset = scc_postreset,
.post_internal_cmd = scc_bmdma_stop,
- .irq_clear = scc_bmdma_irq_clear,
- .irq_on = scc_irq_on,
- .irq_ack = scc_irq_ack,
+ .sff_irq_clear = scc_irq_clear,
+ .sff_irq_on = scc_irq_on,
.port_start = scc_port_start,
.port_stop = scc_port_stop,
static struct ata_port_info scc_port_info[] = {
{
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY,
- .pio_mask = 0x1f, /* pio0-4 */
- .mwdma_mask = 0x00,
+ .pio_mask = ATA_PIO4,
+ /* No MWDMA */
.udma_mask = ATA_UDMA6,
.port_ops = &scc_pata_ops,
},
return rc;
host->iomap = pcim_iomap_table(pdev);
+ ata_port_pbar_desc(host->ports[0], SCC_CTRL_BAR, -1, "ctrl");
+ ata_port_pbar_desc(host->ports[0], SCC_BMID_BAR, -1, "bmid");
+
rc = scc_host_init(host);
if (rc)
return rc;
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &scc_sht);
+ return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ IRQF_SHARED, &scc_sht);
}
static struct pci_driver scc_pci_driver = {
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff