pata_efar: fix wrong MWDMA timings being programmed

[safe/jmp/linux-2.6] / drivers / ata / pata_rz1000.c

diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index de3698c..a5e4dfe 100644 (file)
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -38,70 +38,26 @@ static int rz1000_set_mode(struct ata_link *link, struct ata_device **unused)
 {
        struct ata_device *dev;
 
-       ata_link_for_each_dev(dev, link) {
-               if (ata_dev_enabled(dev)) {
-                       /* We don't really care */
-                       dev->pio_mode = XFER_PIO_0;
-                       dev->xfer_mode = XFER_PIO_0;
-                       dev->xfer_shift = ATA_SHIFT_PIO;
-                       dev->flags |= ATA_DFLAG_PIO;
-                       ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
-               }
+       ata_for_each_dev(dev, link, ENABLED) {
+               /* We don't really care */
+               dev->pio_mode = XFER_PIO_0;
+               dev->xfer_mode = XFER_PIO_0;
+               dev->xfer_shift = ATA_SHIFT_PIO;
+               dev->flags |= ATA_DFLAG_PIO;
+               ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
        }
        return 0;
 }
 
 
 static struct scsi_host_template rz1000_sht = {
-       .module                 = THIS_MODULE,
-       .name                   = DRV_NAME,
-       .ioctl                  = ata_scsi_ioctl,
-       .queuecommand           = ata_scsi_queuecmd,
-       .can_queue              = ATA_DEF_QUEUE,
-       .this_id                = ATA_SHT_THIS_ID,
-       .sg_tablesize           = LIBATA_MAX_PRD,
-       .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
-       .emulated               = ATA_SHT_EMULATED,
-       .use_clustering         = ATA_SHT_USE_CLUSTERING,
-       .proc_name              = DRV_NAME,
-       .dma_boundary           = ATA_DMA_BOUNDARY,
-       .slave_configure        = ata_scsi_slave_config,
-       .slave_destroy          = ata_scsi_slave_destroy,
-       .bios_param             = ata_std_bios_param,
+       ATA_PIO_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations rz1000_port_ops = {
-       .set_mode       = rz1000_set_mode,
-
-       .port_disable   = ata_port_disable,
-       .tf_load        = ata_tf_load,
-       .tf_read        = ata_tf_read,
-       .check_status   = ata_check_status,
-       .exec_command   = ata_exec_command,
-       .dev_select     = ata_std_dev_select,
-
-       .bmdma_setup    = ata_bmdma_setup,
-       .bmdma_start    = ata_bmdma_start,
-       .bmdma_stop     = ata_bmdma_stop,
-       .bmdma_status   = ata_bmdma_status,
-
-       .qc_prep        = ata_qc_prep,
-       .qc_issue       = ata_qc_issue_prot,
-
-       .data_xfer      = ata_data_xfer,
-
-       .freeze         = ata_bmdma_freeze,
-       .thaw           = ata_bmdma_thaw,
-       .error_handler  = ata_bmdma_error_handler,
-       .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .inherits       = &ata_sff_port_ops,
        .cable_detect   = ata_cable_40wire,
-
-       .irq_handler    = ata_interrupt,
-       .irq_clear      = ata_bmdma_irq_clear,
-       .irq_on         = ata_irq_on,
-       .irq_ack        = ata_irq_ack,
-
-       .port_start     = ata_port_start,
+       .set_mode       = rz1000_set_mode,
 };
 
 static int rz1000_fifo_disable(struct pci_dev *pdev)
@@ -129,20 +85,17 @@ static int rz1000_fifo_disable(struct pci_dev *pdev)
 
 static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
-       static int printed_version;
        static const struct ata_port_info info = {
-               .sht = &rz1000_sht,
                .flags = ATA_FLAG_SLAVE_POSS,
-               .pio_mask = 0x1f,
+               .pio_mask = ATA_PIO4,
                .port_ops = &rz1000_port_ops
        };
        const struct ata_port_info *ppi[] = { &info, NULL };
 
-       if (!printed_version++)
-               printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+       printk_once(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
 
        if (rz1000_fifo_disable(pdev) == 0)
-               return ata_pci_init_one(pdev, ppi);
+               return ata_pci_sff_init_one(pdev, ppi, &rz1000_sht, NULL);
 
        printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n");
        /* Not safe to use so skip */