* pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer
* (C) 2005 Red Hat Inc
* Alan Cox <alan@redhat.com>
+ * (C) 2007 Bartlomiej Zolnierkiewicz
*
* Based in part on linux/drivers/ide/pci/pdc202xx_old.c
*
#include <linux/libata.h>
#define DRV_NAME "pata_pdc202xx_old"
-#define DRV_VERSION "0.3.0"
+#define DRV_VERSION "0.4.3"
-/**
- * pdc2024x_pre_reset - probe begin
- * @ap: ATA port
- *
- * Set up cable type and use generic probe init
- */
-
-static int pdc2024x_pre_reset(struct ata_port *ap)
-{
- ap->cbl = ATA_CBL_PATA40;
- return ata_std_prereset(ap);
-}
-
-
-static void pdc2024x_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, pdc2024x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-
-static int pdc2026x_pre_reset(struct ata_port *ap)
+static int pdc2026x_cable_detect(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u16 cis;
pci_read_config_word(pdev, 0x50, &cis);
if (cis & (1 << (10 + ap->port_no)))
- ap->cbl = ATA_CBL_PATA80;
- else
- ap->cbl = ATA_CBL_PATA40;
-
- return ata_std_prereset(ap);
-}
-
-static void pdc2026x_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, pdc2026x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+ return ATA_CBL_PATA40;
+ return ATA_CBL_PATA80;
}
/**
static void pdc202xx_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- int port = 0x60 + 4 * ap->port_no + 2 * adev->devno;
+ int port = 0x60 + 8 * ap->port_no + 4 * adev->devno;
static u16 pio_timing[5] = {
0x0913, 0x050C , 0x0308, 0x0206, 0x0104
};
pci_read_config_byte(pdev, port, &r_ap);
pci_read_config_byte(pdev, port + 1, &r_bp);
r_ap &= ~0x3F; /* Preserve ERRDY_EN, SYNC_IN */
- r_bp &= ~0x07;
+ r_bp &= ~0x1F;
r_ap |= (pio_timing[pio] >> 8);
r_bp |= (pio_timing[pio] & 0xFF);
static void pdc202xx_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- int port = 0x60 + 4 * ap->port_no + 2 * adev->devno;
+ int port = 0x60 + 8 * ap->port_no + 4 * adev->devno;
static u8 udma_timing[6][2] = {
{ 0x60, 0x03 }, /* 33 Mhz Clock */
{ 0x40, 0x02 },
{ 0x20, 0x01 },
{ 0x20, 0x01 }
};
+ static u8 mdma_timing[3][2] = {
+ { 0xe0, 0x0f },
+ { 0x60, 0x04 },
+ { 0x60, 0x03 },
+ };
u8 r_bp, r_cp;
pci_read_config_byte(pdev, port + 1, &r_bp);
pci_read_config_byte(pdev, port + 2, &r_cp);
- r_bp &= ~0xF0;
+ r_bp &= ~0xE0;
r_cp &= ~0x0F;
if (adev->dma_mode >= XFER_UDMA_0) {
} else {
int speed = adev->dma_mode - XFER_MW_DMA_0;
- r_bp |= 0x60;
- r_cp |= (5 - speed);
+ r_bp |= mdma_timing[speed][0];
+ r_cp |= mdma_timing[speed][1];
}
pci_write_config_byte(pdev, port + 1, r_bp);
pci_write_config_byte(pdev, port + 2, r_cp);
*
* In UDMA3 or higher we have to clock switch for the duration of the
* DMA transfer sequence.
+ *
+ * Note: The host lock held by the libata layer protects
+ * us from two channels both trying to set DMA bits at once
*/
static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
pdc202xx_set_dmamode(ap, qc->dev);
/* Cases the state machine will not complete correctly without help */
- if ((tf->flags & ATA_TFLAG_LBA48) || tf->protocol == ATA_PROT_ATAPI_DMA)
- {
- len = qc->nbytes;
+ if ((tf->flags & ATA_TFLAG_LBA48) || tf->protocol == ATAPI_PROT_DMA) {
+ len = qc->nbytes / 2;
if (tf->flags & ATA_TFLAG_WRITE)
len |= 0x06000000;
*
* After a DMA completes we need to put the clock back to 33MHz for
* PIO timings.
+ *
+ * Note: The host lock held by the libata layer protects
+ * us from two channels both trying to set DMA bits at once
*/
static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
void __iomem *atapi_reg = master + 0x20 + (4 * ap->port_no);
/* Cases the state machine will not complete correctly */
- if (tf->protocol == ATA_PROT_ATAPI_DMA || ( tf->flags & ATA_TFLAG_LBA48)) {
+ if (tf->protocol == ATAPI_PROT_DMA || (tf->flags & ATA_TFLAG_LBA48)) {
iowrite32(0, atapi_reg);
iowrite8(ioread8(clock) & ~sel66, clock);
}
- /* Check we keep host level locking here */
/* Flip back to 33Mhz for PIO */
if (adev->dma_mode >= XFER_UDMA_2)
iowrite8(ioread8(clock) & ~sel66, clock);
-
ata_bmdma_stop(qc);
+ pdc202xx_set_piomode(ap, adev);
}
/**
* pdc2026x_dev_config - device setup hook
- * @ap: ATA port
* @adev: newly found device
*
* Perform chip specific early setup. We need to lock the transfer
* barf.
*/
-static void pdc2026x_dev_config(struct ata_port *ap, struct ata_device *adev)
+static void pdc2026x_dev_config(struct ata_device *adev)
{
adev->max_sectors = 256;
}
+static int pdc2026x_port_start(struct ata_port *ap)
+{
+ void __iomem *bmdma = ap->ioaddr.bmdma_addr;
+ if (bmdma) {
+ /* Enable burst mode */
+ u8 burst = ioread8(bmdma + 0x1f);
+ iowrite8(burst | 0x01, bmdma + 0x1f);
+ }
+ return ata_sff_port_start(ap);
+}
+
+/**
+ * pdc2026x_check_atapi_dma - Check whether ATAPI DMA can be supported for this command
+ * @qc: Metadata associated with taskfile to check
+ *
+ * Just say no - not supported on older Promise.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ *
+ * RETURNS: 0 when ATAPI DMA can be used
+ * 1 otherwise
+ */
+
+static int pdc2026x_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ return 1;
+}
+
static struct scsi_host_template pdc202xx_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
};
static struct ata_port_operations pdc2024x_port_ops = {
- .port_disable = ata_port_disable,
.set_piomode = pdc202xx_set_piomode,
.set_dmamode = pdc202xx_set_dmamode,
.mode_filter = ata_pci_default_filter,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = pdc2024x_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .irq_ack = ata_irq_ack,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static struct ata_port_operations pdc2026x_port_ops = {
- .port_disable = ata_port_disable,
.set_piomode = pdc202xx_set_piomode,
.set_dmamode = pdc202xx_set_dmamode,
.mode_filter = ata_pci_default_filter,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = pdc2026x_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = pdc2026x_cable_detect,
+ .check_atapi_dma= pdc2026x_check_atapi_dma,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = pdc2026x_bmdma_start,
.bmdma_stop = pdc2026x_bmdma_stop,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .irq_ack = ata_irq_ack,
- .port_start = ata_port_start,
+ .port_start = pdc2026x_port_start,
};
static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- static struct ata_port_info info[3] = {
+ static const struct ata_port_info info[3] = {
{
.sht = &pdc202xx_sht,
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA2,
},
{
.sht = &pdc202xx_sht,
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA4,
},
{
.sht = &pdc202xx_sht,
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA5,
}
};
- static struct ata_port_info *port_info[2];
-
- port_info[0] = port_info[1] = &info[id->driver_data];
+ const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL };
if (dev->device == PCI_DEVICE_ID_PROMISE_20265) {
struct pci_dev *bridge = dev->bus->self;
/* Don't grab anything behind a Promise I2O RAID */
if (bridge && bridge->vendor == PCI_VENDOR_ID_INTEL) {
- if( bridge->device == PCI_DEVICE_ID_INTEL_I960)
+ if (bridge->device == PCI_DEVICE_ID_INTEL_I960)
return -ENODEV;
- if( bridge->device == PCI_DEVICE_ID_INTEL_I960RM)
+ if (bridge->device == PCI_DEVICE_ID_INTEL_I960RM)
return -ENODEV;
}
}
- return ata_pci_init_one(dev, port_info, 2);
+ return ata_pci_init_one(dev, ppi);
}
static const struct pci_device_id pdc202xx[] = {
.id_table = pdc202xx,
.probe = pdc202xx_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init pdc202xx_init(void)