regulator: Fix check of unsigned return value and transmit errors in wm831x_gp_ldo_ge...
[safe/jmp/linux-2.6] / drivers / ata / pata_opti.c
index 1e865f1..99eddda 100644 (file)
@@ -1,7 +1,6 @@
 /*
  * pata_opti.c         - ATI PATA for new ATA layer
  *                       (C) 2005 Red Hat Inc
- *                       Alan Cox <alan@redhat.com>
  *
  * Based on
  *  linux/drivers/ide/pci/opti621.c            Version 0.7     Sept 10, 2002
@@ -64,22 +63,7 @@ static int opti_pre_reset(struct ata_link *link, unsigned long deadline)
        if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no]))
                return -ENOENT;
 
-       return ata_std_prereset(link, deadline);
-}
-
-/**
- *     opti_probe_reset                -       probe reset
- *     @ap: ATA port
- *
- *     Perform the ATA probe and bus reset sequence plus specific handling
- *     for this hardware. The Opti needs little handling - we have no UDMA66
- *     capability that needs cable detection. All we must do is check the port
- *     is enabled.
- */
-
-static void opti_error_handler(struct ata_port *ap)
-{
-       ata_bmdma_drive_eh(ap, opti_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+       return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -165,55 +149,21 @@ static void opti_set_piomode(struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template opti_sht = {
-       .module                 = THIS_MODULE,
-       .name                   = DRV_NAME,
-       .ioctl                  = ata_scsi_ioctl,
-       .queuecommand           = ata_scsi_queuecmd,
-       .can_queue              = ATA_DEF_QUEUE,
-       .this_id                = ATA_SHT_THIS_ID,
-       .sg_tablesize           = LIBATA_MAX_PRD,
-       .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
-       .emulated               = ATA_SHT_EMULATED,
-       .use_clustering         = ATA_SHT_USE_CLUSTERING,
-       .proc_name              = DRV_NAME,
-       .dma_boundary           = ATA_DMA_BOUNDARY,
-       .slave_configure        = ata_scsi_slave_config,
-       .slave_destroy          = ata_scsi_slave_destroy,
-       .bios_param             = ata_std_bios_param,
+       ATA_PIO_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations opti_port_ops = {
-       .set_piomode    = opti_set_piomode,
-       .tf_load        = ata_tf_load,
-       .tf_read        = ata_tf_read,
-       .check_status   = ata_check_status,
-       .exec_command   = ata_exec_command,
-       .dev_select     = ata_std_dev_select,
-
-       .freeze         = ata_bmdma_freeze,
-       .thaw           = ata_bmdma_thaw,
-       .error_handler  = opti_error_handler,
-       .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .inherits       = &ata_sff_port_ops,
        .cable_detect   = ata_cable_40wire,
-
-       .qc_prep        = ata_qc_prep,
-       .qc_issue       = ata_qc_issue_prot,
-
-       .data_xfer      = ata_data_xfer,
-
-       .irq_handler    = ata_interrupt,
-       .irq_clear      = ata_noop_irq_clear,
-       .irq_on         = ata_irq_on,
-
-       .port_start     = ata_sff_port_start,
+       .set_piomode    = opti_set_piomode,
+       .prereset       = opti_pre_reset,
 };
 
 static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
        static const struct ata_port_info info = {
-               .sht = &opti_sht,
                .flags = ATA_FLAG_SLAVE_POSS,
-               .pio_mask = 0x1f,
+               .pio_mask = ATA_PIO4,
                .port_ops = &opti_port_ops
        };
        const struct ata_port_info *ppi[] = { &info, NULL };
@@ -222,7 +172,7 @@ static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id)
        if (!printed_version++)
                dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
 
-       return ata_pci_init_one(dev, ppi);
+       return ata_pci_sff_init_one(dev, ppi, &opti_sht, NULL);
 }
 
 static const struct pci_device_id opti[] = {