KVM: SVM: Exit to userspace if write to cr8 and not using in-kernel apic
[safe/jmp/linux-2.6] / drivers / ata / pata_ns87410.c
index 95c4e0b..9fe66fd 100644 (file)
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_ns87410"
-#define DRV_VERSION "0.4.3"
+#define DRV_VERSION "0.4.6"
 
 /**
  *     ns87410_pre_reset               -       probe begin
- *     @ap: ATA port
+ *     @link: ATA link
+ *     @deadline: deadline jiffies for the operation
  *
- *     Set up cable type and use generic probe init
+ *     Check enabled ports
  */
 
-static int ns87410_pre_reset(struct ata_port *ap)
+static int ns87410_pre_reset(struct ata_link *link, unsigned long deadline)
 {
+       struct ata_port *ap = link->ap;
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
        static const struct pci_bits ns87410_enable_bits[] = {
                { 0x43, 1, 0x08, 0x08 },
@@ -47,8 +49,8 @@ static int ns87410_pre_reset(struct ata_port *ap)
 
        if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no]))
                return -ENOENT;
-       ap->cbl = ATA_CBL_PATA40;
-       return ata_std_prereset(ap);
+
+       return ata_std_prereset(link, deadline);
 }
 
 /**
@@ -122,7 +124,7 @@ static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev)
  *
  *     Called when the libata layer is about to issue a command. We wrap
  *     this interface so that we can load the correct ATA timings if
- *     neccessary.
+ *     necessary.
  */
 
 static unsigned int ns87410_qc_issue_prot(struct ata_queued_cmd *qc)
@@ -157,12 +159,9 @@ static struct scsi_host_template ns87410_sht = {
        .slave_configure        = ata_scsi_slave_config,
        .slave_destroy          = ata_scsi_slave_destroy,
        .bios_param             = ata_std_bios_param,
-       .resume                 = ata_scsi_device_resume,
-       .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations ns87410_port_ops = {
-       .port_disable   = ata_port_disable,
        .set_piomode    = ns87410_set_piomode,
 
        .tf_load        = ata_tf_load,
@@ -175,6 +174,7 @@ static struct ata_port_operations ns87410_port_ops = {
        .thaw           = ata_bmdma_thaw,
        .error_handler  = ns87410_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = ata_cable_40wire,
 
        .qc_prep        = ata_qc_prep,
        .qc_issue       = ns87410_qc_issue_prot,
@@ -183,20 +183,21 @@ static struct ata_port_operations ns87410_port_ops = {
 
        .irq_handler    = ata_interrupt,
        .irq_clear      = ata_bmdma_irq_clear,
+       .irq_on         = ata_irq_on,
 
-       .port_start     = ata_port_start,
+       .port_start     = ata_sff_port_start,
 };
 
 static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-       static struct ata_port_info info = {
+       static const struct ata_port_info info = {
                .sht = &ns87410_sht,
-               .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+               .flags = ATA_FLAG_SLAVE_POSS,
                .pio_mask = 0x0F,
                .port_ops = &ns87410_port_ops
        };
-       static struct ata_port_info *port_info[2] = {&info, &info};
-       return ata_pci_init_one(dev, port_info, 2);
+       const struct ata_port_info *ppi[] = { &info, NULL };
+       return ata_pci_init_one(dev, ppi);
 }
 
 static const struct pci_device_id ns87410[] = {
@@ -210,8 +211,10 @@ static struct pci_driver ns87410_pci_driver = {
        .id_table       = ns87410,
        .probe          = ns87410_init_one,
        .remove         = ata_pci_remove_one,
+#ifdef CONFIG_PM
        .suspend        = ata_pci_device_suspend,
        .resume         = ata_pci_device_resume,
+#endif
 };
 
 static int __init ns87410_init(void)