libata-sff: separate out BMDMA qc_issue

[safe/jmp/linux-2.6] / drivers / ata / pata_netcell.c

diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 2d64c58..94f979a 100644 (file)
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -1,7 +1,7 @@
 /*
  *    pata_netcell.c - Netcell PATA driver
  *
- *     (c) 2006 Red Hat  <alan@redhat.com>
+ *     (c) 2006 Red Hat
  */
 
 #include <linux/kernel.h>
@@ -20,57 +20,24 @@
 
 /* No PIO or DMA methods needed for this device */
 
+static unsigned int netcell_read_id(struct ata_device *adev,
+                                       struct ata_taskfile *tf, u16 *id)
+{
+       unsigned int err_mask = ata_do_dev_read_id(adev, tf, id);
+       /* Firmware forgets to mark words 85-87 valid */
+       if (err_mask == 0)
+               id[ATA_ID_CSF_DEFAULT] |= 0x4000;
+       return err_mask;
+}
+
 static struct scsi_host_template netcell_sht = {
-       .module                 = THIS_MODULE,
-       .name                   = DRV_NAME,
-       .ioctl                  = ata_scsi_ioctl,
-       .queuecommand           = ata_scsi_queuecmd,
-       .can_queue              = ATA_DEF_QUEUE,
-       .this_id                = ATA_SHT_THIS_ID,
-       .sg_tablesize           = LIBATA_MAX_PRD,
-       .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
-       .emulated               = ATA_SHT_EMULATED,
-       .use_clustering         = ATA_SHT_USE_CLUSTERING,
-       .proc_name              = DRV_NAME,
-       .dma_boundary           = ATA_DMA_BOUNDARY,
-       .slave_configure        = ata_scsi_slave_config,
-       .slave_destroy          = ata_scsi_slave_destroy,
-       /* Use standard CHS mapping rules */
-       .bios_param             = ata_std_bios_param,
+       ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations netcell_ops = {
-       .port_disable           = ata_port_disable,
-
-       /* Task file is PCI ATA format, use helpers */
-       .tf_load                = ata_tf_load,
-       .tf_read                = ata_tf_read,
-       .check_status           = ata_check_status,
-       .exec_command           = ata_exec_command,
-       .dev_select             = ata_std_dev_select,
-
-       .freeze                 = ata_bmdma_freeze,
-       .thaw                   = ata_bmdma_thaw,
-       .error_handler          = ata_bmdma_error_handler,
-       .post_internal_cmd      = ata_bmdma_post_internal_cmd,
-       .cable_detect           = ata_cable_80wire,
-
-       /* BMDMA handling is PCI ATA format, use helpers */
-       .bmdma_setup            = ata_bmdma_setup,
-       .bmdma_start            = ata_bmdma_start,
-       .bmdma_stop             = ata_bmdma_stop,
-       .bmdma_status           = ata_bmdma_status,
-       .qc_prep                = ata_qc_prep,
-       .qc_issue               = ata_qc_issue_prot,
-       .data_xfer              = ata_data_xfer,
-
-       /* IRQ-related hooks */
-       .irq_handler            = ata_interrupt,
-       .irq_clear              = ata_bmdma_irq_clear,
-       .irq_on                 = ata_irq_on,
-
-       /* Generic PATA PCI ATA helpers */
-       .port_start             = ata_port_start,
+static struct ata_port_operations netcell_ops = {
+       .inherits       = &ata_bmdma_port_ops,
+       .cable_detect   = ata_cable_80wire,
+       .read_id        = netcell_read_id,
 };
 
 
@@ -92,26 +59,30 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 {
        static int printed_version;
        static const struct ata_port_info info = {
-               .sht            = &netcell_sht,
                .flags          = ATA_FLAG_SLAVE_POSS,
                /* Actually we don't really care about these as the
                   firmware deals with it */
-               .pio_mask       = 0x1f, /* pio0-4 */
-               .mwdma_mask     = 0x07, /* mwdma0-2 */
+               .pio_mask       = ATA_PIO4,
+               .mwdma_mask     = ATA_MWDMA2,
                .udma_mask      = ATA_UDMA5, /* UDMA 133 */
                .port_ops       = &netcell_ops,
        };
        const struct ata_port_info *port_info[] = { &info, NULL };
+       int rc;
 
        if (!printed_version++)
                dev_printk(KERN_DEBUG, &pdev->dev,
                           "version " DRV_VERSION "\n");
 
+       rc = pcim_enable_device(pdev);
+       if (rc)
+               return rc;
+
        /* Any chip specific setup/optimisation/messages here */
-       ata_pci_clear_simplex(pdev);
+       ata_pci_bmdma_clear_simplex(pdev);
 
        /* And let the library code do the work */
-       return ata_pci_init_one(pdev, port_info);
+       return ata_pci_sff_init_one(pdev, port_info, &netcell_sht, NULL, 0);
 }
 
 static const struct pci_device_id netcell_pci_tbl[] = {