* isn't making full use of the device functionality but it is
* easy to get working.
*
- * (c) 2006 Red Hat <alan@redhat.com>
+ * (c) 2006 Red Hat
*/
#include <linux/kernel.h>
#include <linux/ata.h>
#define DRV_NAME "pata_marvell"
-#define DRV_VERSION "0.1.1"
+#define DRV_VERSION "0.1.6"
/**
- * marvell_pre_reset - check for 40/80 pin
- * @ap: Port
+ * marvell_pata_active - check if PATA is active
+ * @pdev: PCI device
*
- * Perform the PATA port setup we need.
+ * Returns 1 if the PATA port may be active. We know how to check this
+ * for the 6145 but not the other devices
*/
-static int marvell_pre_reset(struct ata_port *ap)
+static int marvell_pata_active(struct pci_dev *pdev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int i;
u32 devices;
void __iomem *barp;
- int i;
- /* Check if our port is enabled */
+ /* We don't yet know how to do this for other devices */
+ if (pdev->device != 0x6145)
+ return 1;
barp = pci_iomap(pdev, 5, 0x10);
if (barp == NULL)
return -ENOMEM;
+
printk("BAR5:");
for(i = 0; i <= 0x0F; i++)
- printk("%02X:%02X ", i, readb(barp + i));
+ printk("%02X:%02X ", i, ioread8(barp + i));
printk("\n");
-
- devices = readl(barp + 0x0C);
- pci_iounmap(pdev, barp);
-
- if ((pdev->device == 0x6145) && (ap->port_no == 0) &&
- (!(devices & 0x10))) /* PATA enable ? */
- return -ENOENT;
- /* Cable type */
- switch(ap->port_no)
- {
- case 0:
- if (inb(ap->ioaddr.bmdma_addr + 1) & 1)
- ap->cbl = ATA_CBL_PATA40;
- else
- ap->cbl = ATA_CBL_PATA80;
- break;
+ devices = ioread32(barp + 0x0C);
+ pci_iounmap(pdev, barp);
- case 1: /* Legacy SATA port */
- ap->cbl = ATA_CBL_SATA;
- break;
- }
- return ata_std_prereset(ap);
+ if (devices & 0x10)
+ return 1;
+ return 0;
}
/**
- * marvell_error_handler - Setup and error handler
- * @ap: Port to handle
+ * marvell_pre_reset - check for 40/80 pin
+ * @link: link
+ * @deadline: deadline jiffies for the operation
*
- * LOCKING:
- * None (inherited from caller).
+ * Perform the PATA port setup we need.
*/
-static void marvell_error_handler(struct ata_port *ap)
+static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ if (pdev->device == 0x6145 && ap->port_no == 0 &&
+ !marvell_pata_active(pdev)) /* PATA enable ? */
+ return -ENOENT;
+
+ return ata_sff_prereset(link, deadline);
+}
+
+static int marvell_cable_detect(struct ata_port *ap)
{
- return ata_bmdma_drive_eh(ap, marvell_pre_reset, ata_std_softreset,
- NULL, ata_std_postreset);
+ /* Cable type */
+ switch(ap->port_no)
+ {
+ case 0:
+ if (ioread8(ap->ioaddr.bmdma_addr + 1) & 1)
+ return ATA_CBL_PATA40;
+ return ATA_CBL_PATA80;
+ case 1: /* Legacy SATA port */
+ return ATA_CBL_SATA;
+ }
+
+ BUG();
+ return 0; /* Our BUG macro needs the right markup */
}
/* No PIO or DMA methods needed for this device */
static struct scsi_host_template marvell_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- /* Use standard CHS mapping rules */
- .bios_param = ata_std_bios_param,
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations marvell_ops = {
- .port_disable = ata_port_disable,
-
- /* Task file is PCI ATA format, use helpers */
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = marvell_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- /* BMDMA handling is PCI ATA format, use helpers */
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_pio_data_xfer,
-
- /* Timeout handling */
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
-
- /* Generic PATA PCI ATA helpers */
- .port_start = ata_port_start,
- .port_stop = ata_port_stop,
- .host_stop = ata_host_stop,
+static struct ata_port_operations marvell_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = marvell_cable_detect,
+ .prereset = marvell_pre_reset,
};
static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
{
- static struct ata_port_info info = {
- .sht = &marvell_sht,
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ static const struct ata_port_info info = {
+ .flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
- .udma_mask = 0x3f,
+ .udma_mask = ATA_UDMA5,
.port_ops = &marvell_ops,
};
- static struct ata_port_info info_sata = {
- .sht = &marvell_sht,
+ static const struct ata_port_info info_sata = {
/* Slave possible as its magically mapped not real */
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
- .udma_mask = 0x7f,
+ .udma_mask = ATA_UDMA6,
.port_ops = &marvell_ops,
};
- struct ata_port_info *port_info[2] = { &info, &info_sata };
- int n_port = 2;
+ const struct ata_port_info *ppi[] = { &info, &info_sata };
if (pdev->device == 0x6101)
- n_port = 1;
+ ppi[1] = &ata_dummy_port_info;
- return ata_pci_init_one(pdev, port_info, n_port);
+#if defined(CONFIG_AHCI) || defined(CONFIG_AHCI_MODULE)
+ if (!marvell_pata_active(pdev)) {
+ printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n");
+ return -ENODEV;
+ }
+#endif
+ return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL);
}
static const struct pci_device_id marvell_pci_tbl[] = {
{ PCI_DEVICE(0x11AB, 0x6101), },
+ { PCI_DEVICE(0x11AB, 0x6121), },
+ { PCI_DEVICE(0x11AB, 0x6123), },
{ PCI_DEVICE(0x11AB, 0x6145), },
{ } /* terminate list */
};
.id_table = marvell_pci_tbl,
.probe = marvell_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init marvell_init(void)
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff