#include <linux/ata.h>
#define DRV_NAME "pata_it8213"
-#define DRV_VERSION "0.0.2"
+#define DRV_VERSION "0.0.3"
/**
* it8213_pre_reset - check for 40/80 pin
- * @ap: Port
+ * @link: link
+ * @deadline: deadline jiffies for the operation
*
- * Perform cable detection for the 8213 ATA interface. This is
- * different to the PIIX arrangement
+ * Filter out ports by the enable bits before doing the normal reset
+ * and probe.
*/
-static int it8213_pre_reset(struct ata_port *ap)
+static int it8213_pre_reset(struct ata_link *link, unsigned long deadline)
{
static const struct pci_bits it8213_enable_bits[] = {
{ 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */
};
-
+ struct ata_port *ap = link->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- u8 tmp;
-
if (!pci_test_config_bits(pdev, &it8213_enable_bits[ap->port_no]))
return -ENOENT;
- pci_read_config_byte(pdev, 0x42, &tmp);
- if (tmp & 2) /* The initial docs are incorrect */
- ap->cbl = ATA_CBL_PATA40;
- else
- ap->cbl = ATA_CBL_PATA80;
- return ata_std_prereset(ap);
+ return ata_sff_prereset(link, deadline);
}
/**
- * it8213_probe_reset - Probe specified port on PATA host controller
- * @ap: Port to probe
+ * it8213_cable_detect - check for 40/80 pin
+ * @ap: Port
*
- * LOCKING:
- * None (inherited from caller).
+ * Perform cable detection for the 8213 ATA interface. This is
+ * different to the PIIX arrangement
*/
-static void it8213_error_handler(struct ata_port *ap)
+static int it8213_cable_detect(struct ata_port *ap)
{
- ata_bmdma_drive_eh(ap, it8213_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u8 tmp;
+ pci_read_config_byte(pdev, 0x42, &tmp);
+ if (tmp & 2) /* The initial docs are incorrect */
+ return ATA_CBL_PATA40;
+ return ATA_CBL_PATA80;
}
/**
* it8213_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
- * @adev: um
+ * @adev: Device whose timings we are configuring
*
* Set PIO mode for device, in host controller PCI config space.
*
idetm_data &= 0xCC0F;
idetm_data |= (control << 4);
- /* Slave timing in seperate register */
+ /* Slave timing in separate register */
pci_read_config_byte(dev, 0x44, &slave_data);
slave_data &= 0xF0;
slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << 4;
}
static struct scsi_host_template it8213_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .bios_param = ata_std_bios_param,
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations it8213_ops = {
- .port_disable = ata_port_disable,
+
+static struct ata_port_operations it8213_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = it8213_cable_detect,
.set_piomode = it8213_set_piomode,
.set_dmamode = it8213_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = it8213_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
-
- .port_start = ata_port_start,
+ .prereset = it8213_pre_reset,
};
static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
- static struct ata_port_info info = {
- .sht = &it8213_sht,
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ static const struct ata_port_info info = {
+ .flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x1f, /* UDMA 100 */
+ .udma_mask = ATA_UDMA4, /* FIXME: want UDMA 100? */
.port_ops = &it8213_ops,
};
- static struct ata_port_info *port_info[2] = { &info, &info };
+ /* Current IT8213 stuff is single port */
+ const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- /* Current IT8213 stuff is single port */
- return ata_pci_init_one(pdev, port_info, 1);
+ return ata_pci_sff_init_one(pdev, ppi, &it8213_sht, NULL);
}
static const struct pci_device_id it8213_pci_tbl[] = {
.id_table = it8213_pci_tbl,
.probe = it8213_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init it8213_init(void)
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff