[SCSI] add residual argument to scsi_execute and scsi_execute_req

[safe/jmp/linux-2.6] / drivers / ata / pata_hpt366.c

diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 7a6ff3d..e0c4f05 100644 (file)
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -27,7 +27,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME       "pata_hpt366"
-#define DRV_VERSION    "0.6.1"
+#define DRV_VERSION    "0.6.2"
 
 struct hpt_clock {
        u8      xfer_speed;
@@ -180,11 +180,13 @@ static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask)
                if (hpt_dma_blacklisted(adev, "UDMA",  bad_ata33))
                        mask &= ~ATA_MASK_UDMA;
                if (hpt_dma_blacklisted(adev, "UDMA3", bad_ata66_3))
-                       mask &= ~(0x07 << ATA_SHIFT_UDMA);
+                       mask &= ~(0xF8 << ATA_SHIFT_UDMA);
                if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
-                       mask &= ~(0x0F << ATA_SHIFT_UDMA);
-       }
-       return ata_pci_default_filter(adev, mask);
+                       mask &= ~(0xF0 << ATA_SHIFT_UDMA);
+       } else if (adev->class == ATA_DEV_ATAPI)
+               mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+
+       return ata_bmdma_mode_filter(adev, mask);
 }
 
 /**
@@ -211,11 +213,15 @@ static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
 
 static int hpt36x_cable_detect(struct ata_port *ap)
 {
-       u8 ata66;
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+       u8 ata66;
 
+       /*
+        * Each channel of pata_hpt366 occupies separate PCI function
+        * as the primary channel and bit1 indicates the cable type.
+        */
        pci_read_config_byte(pdev, 0x5A, &ata66);
-       if (ata66 & (1 << ap->port_no))
+       if (ata66 & 2)
                return ATA_CBL_PATA40;
        return ATA_CBL_PATA80;
 }
@@ -290,21 +296,7 @@ static void hpt366_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template hpt36x_sht = {
-       .module                 = THIS_MODULE,
-       .name                   = DRV_NAME,
-       .ioctl                  = ata_scsi_ioctl,
-       .queuecommand           = ata_scsi_queuecmd,
-       .can_queue              = ATA_DEF_QUEUE,
-       .this_id                = ATA_SHT_THIS_ID,
-       .sg_tablesize           = LIBATA_MAX_PRD,
-       .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
-       .emulated               = ATA_SHT_EMULATED,
-       .use_clustering         = ATA_SHT_USE_CLUSTERING,
-       .proc_name              = DRV_NAME,
-       .dma_boundary           = ATA_DMA_BOUNDARY,
-       .slave_configure        = ata_scsi_slave_config,
-       .slave_destroy          = ata_scsi_slave_destroy,
-       .bios_param             = ata_std_bios_param,
+       ATA_BMDMA_SHT(DRV_NAME),
 };
 
 /*
@@ -312,39 +304,11 @@ static struct scsi_host_template hpt36x_sht = {
  */
 
 static struct ata_port_operations hpt366_port_ops = {
-       .port_disable   = ata_port_disable,
+       .inherits       = &ata_bmdma_port_ops,
+       .cable_detect   = hpt36x_cable_detect,
+       .mode_filter    = hpt366_filter,
        .set_piomode    = hpt366_set_piomode,
        .set_dmamode    = hpt366_set_dmamode,
-       .mode_filter    = hpt366_filter,
-
-       .tf_load        = ata_tf_load,
-       .tf_read        = ata_tf_read,
-       .check_status   = ata_check_status,
-       .exec_command   = ata_exec_command,
-       .dev_select     = ata_std_dev_select,
-
-       .freeze         = ata_bmdma_freeze,
-       .thaw           = ata_bmdma_thaw,
-       .error_handler  = ata_bmdma_error_handler,
-       .post_internal_cmd = ata_bmdma_post_internal_cmd,
-       .cable_detect   = hpt36x_cable_detect,
-
-       .bmdma_setup    = ata_bmdma_setup,
-       .bmdma_start    = ata_bmdma_start,
-       .bmdma_stop     = ata_bmdma_stop,
-       .bmdma_status   = ata_bmdma_status,
-
-       .qc_prep        = ata_qc_prep,
-       .qc_issue       = ata_qc_issue_prot,
-
-       .data_xfer      = ata_data_xfer,
-
-       .irq_handler    = ata_interrupt,
-       .irq_clear      = ata_bmdma_irq_clear,
-       .irq_on         = ata_irq_on,
-       .irq_ack        = ata_irq_ack,
-
-       .port_start     = ata_port_start,
 };
 
 /**
@@ -392,18 +356,22 @@ static void hpt36x_init_chipset(struct pci_dev *dev)
 static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
        static const struct ata_port_info info_hpt366 = {
-               .sht = &hpt36x_sht,
                .flags = ATA_FLAG_SLAVE_POSS,
                .pio_mask = 0x1f,
                .mwdma_mask = 0x07,
-               .udma_mask = 0x1f,
+               .udma_mask = ATA_UDMA4,
                .port_ops = &hpt366_port_ops
        };
-       struct ata_port_info info = info_hpt366;
-       const struct ata_port_info *ppi[] = { &info, NULL };
+       const struct ata_port_info *ppi[] = { &info_hpt366, NULL };
 
+       void *hpriv = NULL;
        u32 class_rev;
        u32 reg1;
+       int rc;
+
+       rc = pcim_enable_device(dev);
+       if (rc)
+               return rc;
 
        pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
        class_rev &= 0xFF;
@@ -420,25 +388,32 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
        /* PCI clocking determines the ATA timing values to use */
        /* info_hpt366 is safe against re-entry so we can scribble on it */
        switch((reg1 & 0x700) >> 8) {
-               case 5:
-                       info.private_data = &hpt366_40;
-                       break;
                case 9:
-                       info.private_data = &hpt366_25;
+                       hpriv = &hpt366_40;
+                       break;
+               case 5:
+                       hpriv = &hpt366_25;
                        break;
                default:
-                       info.private_data = &hpt366_33;
+                       hpriv = &hpt366_33;
                        break;
        }
        /* Now kick off ATA set up */
-       return ata_pci_init_one(dev, ppi);
+       return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv);
 }
 
 #ifdef CONFIG_PM
 static int hpt36x_reinit_one(struct pci_dev *dev)
 {
+       struct ata_host *host = dev_get_drvdata(&dev->dev);
+       int rc;
+
+       rc = ata_pci_device_do_resume(dev);
+       if (rc)
+               return rc;
        hpt36x_init_chipset(dev);
-       return ata_pci_device_resume(dev);
+       ata_host_resume(host);
+       return 0;
 }
 #endif