qlge: bugfix: Move netif_napi_del() to common call point.

[safe/jmp/linux-2.6] / drivers / ata / pata_cs5536.c

diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 391aa88..afed929 100644 (file)
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -110,7 +110,6 @@ static inline int cs5536_write(struct pci_dev *pdev, int reg, int val)
 /**
  *     cs5536_cable_detect     -       detect cable type
  *     @ap: Port to detect on
- *     @deadline: deadline jiffies for the operation
  *
  *     Perform cable detection for ATA66 capable cable. Return a libata
  *     cable type.
@@ -221,55 +220,14 @@ static void cs5536_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template cs5536_sht = {
-       .module                 = THIS_MODULE,
-       .name                   = DRV_NAME,
-       .ioctl                  = ata_scsi_ioctl,
-       .queuecommand           = ata_scsi_queuecmd,
-       .can_queue              = ATA_DEF_QUEUE,
-       .this_id                = ATA_SHT_THIS_ID,
-       .sg_tablesize           = LIBATA_MAX_PRD,
-       .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
-       .emulated               = ATA_SHT_EMULATED,
-       .use_clustering         = ATA_SHT_USE_CLUSTERING,
-       .proc_name              = DRV_NAME,
-       .dma_boundary           = ATA_DMA_BOUNDARY,
-       .slave_configure        = ata_scsi_slave_config,
-       .slave_destroy          = ata_scsi_slave_destroy,
-       .bios_param             = ata_std_bios_param,
+       ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations cs5536_port_ops = {
+       .inherits               = &ata_bmdma_port_ops,
+       .cable_detect           = cs5536_cable_detect,
        .set_piomode            = cs5536_set_piomode,
        .set_dmamode            = cs5536_set_dmamode,
-       .mode_filter            = ata_pci_default_filter,
-
-       .tf_load                = ata_tf_load,
-       .tf_read                = ata_tf_read,
-       .check_status           = ata_check_status,
-       .exec_command           = ata_exec_command,
-       .dev_select             = ata_std_dev_select,
-
-       .freeze                 = ata_bmdma_freeze,
-       .thaw                   = ata_bmdma_thaw,
-       .error_handler          = ata_bmdma_error_handler,
-       .post_internal_cmd      = ata_bmdma_post_internal_cmd,
-       .cable_detect           = cs5536_cable_detect,
-
-       .bmdma_setup            = ata_bmdma_setup,
-       .bmdma_start            = ata_bmdma_start,
-       .bmdma_stop             = ata_bmdma_stop,
-       .bmdma_status           = ata_bmdma_status,
-
-       .qc_prep                = ata_qc_prep,
-       .qc_issue               = ata_qc_issue_prot,
-
-       .data_xfer              = ata_data_xfer,
-
-       .irq_handler            = ata_interrupt,
-       .irq_clear              = ata_bmdma_irq_clear,
-       .irq_on                 = ata_irq_on,
-
-       .port_start             = ata_sff_port_start,
 };
 
 /**
@@ -282,7 +240,6 @@ static struct ata_port_operations cs5536_port_ops = {
 static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
        static const struct ata_port_info info = {
-               .sht = &cs5536_sht,
                .flags = ATA_FLAG_SLAVE_POSS,
                .pio_mask = 0x1f,
                .mwdma_mask = 0x07,
@@ -303,7 +260,7 @@ static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                return -ENODEV;
        }
 
-       return ata_pci_init_one(dev, ppi);
+       return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL);
 }
 
 static const struct pci_device_id cs5536[] = {