sata_fsl: Split hard and soft reset

[safe/jmp/linux-2.6] / drivers / ata / pata_cs5530.c

diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 0bb03da..c974b05 100644 (file)
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -1,7 +1,6 @@
 /*
  * pata-cs5530.c       - CS5530 PATA for new ATA layer
  *                       (C) 2005 Red Hat Inc
- *                       Alan Cox <alan@redhat.com>
  *
  * based upon cs5530.c by Mark Lord.
  *
@@ -133,7 +132,7 @@ static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *     cs5530_qc_issue_prot    -       command issue
+ *     cs5530_qc_issue         -       command issue
  *     @qc: command pending
  *
  *     Called when the libata layer is about to issue a command. We wrap
@@ -142,22 +141,22 @@ static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  *     one MWDMA/UDMA bit.
  */
 
-static unsigned int cs5530_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int cs5530_qc_issue(struct ata_queued_cmd *qc)
 {
        struct ata_port *ap = qc->ap;
        struct ata_device *adev = qc->dev;
        struct ata_device *prev = ap->private_data;
 
        /* See if the DMA settings could be wrong */
-       if (adev->dma_mode != 0 && adev != prev && prev != NULL) {
+       if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
                /* Maybe, but do the channels match MWDMA/UDMA ? */
-               if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) ||
-                   (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0))
+               if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
+                   (ata_using_udma(prev) && !ata_using_udma(adev)))
                        /* Switch the mode bits */
                        cs5530_set_dmamode(ap, adev);
        }
 
-       return ata_qc_issue_prot(qc);
+       return ata_sff_qc_issue(qc);
 }
 
 static struct scsi_host_template cs5530_sht = {
@@ -166,37 +165,14 @@ static struct scsi_host_template cs5530_sht = {
 };
 
 static struct ata_port_operations cs5530_port_ops = {
-       .set_piomode    = cs5530_set_piomode,
-       .set_dmamode    = cs5530_set_dmamode,
-       .mode_filter    = ata_pci_default_filter,
-
-       .tf_load        = ata_tf_load,
-       .tf_read        = ata_tf_read,
-       .check_status   = ata_check_status,
-       .exec_command   = ata_exec_command,
-       .dev_select     = ata_std_dev_select,
-
-       .bmdma_setup    = ata_bmdma_setup,
-       .bmdma_start    = ata_bmdma_start,
-       .bmdma_stop     = ata_bmdma_stop,
-       .bmdma_status   = ata_bmdma_status,
-
-       .freeze         = ata_bmdma_freeze,
-       .thaw           = ata_bmdma_thaw,
-       .error_handler  = ata_bmdma_error_handler,
-       .post_internal_cmd = ata_bmdma_post_internal_cmd,
-       .cable_detect   = ata_cable_40wire,
-
-       .qc_prep        = ata_dumb_qc_prep,
-       .qc_issue       = cs5530_qc_issue_prot,
+       .inherits       = &ata_bmdma_port_ops,
 
-       .data_xfer      = ata_data_xfer,
+       .qc_prep        = ata_sff_dumb_qc_prep,
+       .qc_issue       = cs5530_qc_issue,
 
-       .irq_handler    = ata_interrupt,
-       .irq_clear      = ata_bmdma_irq_clear,
-       .irq_on         = ata_irq_on,
-
-       .port_start     = ata_sff_port_start,
+       .cable_detect   = ata_cable_40wire,
+       .set_piomode    = cs5530_set_piomode,
+       .set_dmamode    = cs5530_set_dmamode,
 };
 
 static const struct dmi_system_id palmax_dmi_table[] = {
@@ -321,18 +297,16 @@ fail_put:
 static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
        static const struct ata_port_info info = {
-               .sht = &cs5530_sht,
                .flags = ATA_FLAG_SLAVE_POSS,
-               .pio_mask = 0x1f,
-               .mwdma_mask = 0x07,
-               .udma_mask = 0x07,
+               .pio_mask = ATA_PIO4,
+               .mwdma_mask = ATA_MWDMA2,
+               .udma_mask = ATA_UDMA2,
                .port_ops = &cs5530_port_ops
        };
        /* The docking connector doesn't do UDMA, and it seems not MWDMA */
        static const struct ata_port_info info_palmax_secondary = {
-               .sht = &cs5530_sht,
                .flags = ATA_FLAG_SLAVE_POSS,
-               .pio_mask = 0x1f,
+               .pio_mask = ATA_PIO4,
                .port_ops = &cs5530_port_ops
        };
        const struct ata_port_info *ppi[] = { &info, NULL };
@@ -350,7 +324,7 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
                ppi[1] = &info_palmax_secondary;
 
        /* Now kick off ATA set up */
-       return ata_pci_init_one(pdev, ppi);
+       return ata_pci_sff_init_one(pdev, ppi, &cs5530_sht, NULL);
 }
 
 #ifdef CONFIG_PM