/*
- * pata_cmd64x.c - ATI PATA for new ATA layer
+ * pata_cmd64x.c - CMD64x PATA for new ATA layer
* (C) 2005 Red Hat Inc
* Alan Cox <alan@redhat.com>
*
#include <linux/libata.h>
#define DRV_NAME "pata_cmd64x"
-#define DRV_VERSION "0.2.2"
+#define DRV_VERSION "0.2.5"
/*
* CMD64x specific registers definition.
DTPR1 = 0x7C
};
-static int cmd64x_pre_reset(struct ata_port *ap)
-{
- ap->cbl = ATA_CBL_PATA40;
- return ata_std_prereset(ap);
-}
-
-static int cmd648_pre_reset(struct ata_port *ap)
+static int cmd648_cable_detect(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u8 r;
/* Check cable detect bits */
pci_read_config_byte(pdev, BMIDECSR, &r);
if (r & (1 << ap->port_no))
- ap->cbl = ATA_CBL_PATA80;
- else
- ap->cbl = ATA_CBL_PATA40;
-
- return ata_std_prereset(ap);
-}
-
-static void cmd64x_error_handler(struct ata_port *ap)
-{
- return ata_bmdma_drive_eh(ap, cmd64x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-static void cmd648_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, cmd648_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+ return ATA_CBL_PATA80;
+ return ATA_CBL_PATA40;
}
/**
- * cmd64x_set_piomode - set initial PIO mode data
+ * cmd64x_set_piomode - set PIO and MWDMA timing
* @ap: ATA interface
* @adev: ATA device
+ * @mode: mode
*
- * Called to do the PIO mode setup.
+ * Called to do the PIO and MWDMA mode setup.
*/
-static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev)
+static void cmd64x_set_timing(struct ata_port *ap, struct ata_device *adev, u8 mode)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct ata_timing t;
int arttim = arttim_port[ap->port_no][adev->devno];
int drwtim = drwtim_port[ap->port_no][adev->devno];
-
- if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) {
+ /* ata_timing_compute is smart and will produce timings for MWDMA
+ that don't violate the drives PIO capabilities. */
+ if (ata_timing_compute(adev, mode, &t, T, 0) < 0) {
printk(KERN_ERR DRV_NAME ": mode computation failed.\n");
return;
}
}
/**
+ * cmd64x_set_piomode - set initial PIO mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Used when configuring the devices ot set the PIO timings. All the
+ * actual work is done by the PIO/MWDMA setting helper
+ */
+
+static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ cmd64x_set_timing(ap, adev, adev->pio_mode);
+}
+
+/**
* cmd64x_set_dmamode - set initial DMA mode data
* @ap: ATA interface
* @adev: ATA device
static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
static const u8 udma_data[] = {
- 0x31, 0x21, 0x11, 0x25, 0x15, 0x05
- };
- static const u8 mwdma_data[] = {
- 0x30, 0x20, 0x10
+ 0x30, 0x20, 0x10, 0x20, 0x10, 0x00
};
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
pci_read_config_byte(pdev, pciD, ®D);
pci_read_config_byte(pdev, pciU, ®U);
- regD &= ~(0x20 << shift);
- regU &= ~(0x35 << shift);
+ /* DMA bits off */
+ regD &= ~(0x20 << adev->devno);
+ /* DMA control bits */
+ regU &= ~(0x30 << shift);
+ /* DMA timing bits */
+ regU &= ~(0x05 << adev->devno);
- if (adev->dma_mode >= XFER_UDMA_0)
+ if (adev->dma_mode >= XFER_UDMA_0) {
+ /* Merge the timing value */
regU |= udma_data[adev->dma_mode - XFER_UDMA_0] << shift;
- else
- regD |= mwdma_data[adev->dma_mode - XFER_MW_DMA_0] << shift;
+ /* Merge the control bits */
+ regU |= 1 << adev->devno; /* UDMA on */
+ if (adev->dma_mode > 2) /* 15nS timing */
+ regU |= 4 << adev->devno;
+ } else {
+ regU &= ~ (1 << adev->devno); /* UDMA off */
+ cmd64x_set_timing(ap, adev, adev->dma_mode);
+ }
regD |= 0x20 << adev->devno;
struct ata_port *ap = qc->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u8 dma_intr;
- int dma_reg = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0;
- int dma_mask = ap->port_no ? ARTTIM2 : CFR;
+ int dma_mask = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0;
+ int dma_reg = ap->port_no ? ARTTIM2 : CFR;
ata_bmdma_stop(qc);
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
};
static struct ata_port_operations cmd64x_port_ops = {
- .port_disable = ata_port_disable,
.set_piomode = cmd64x_set_piomode,
.set_dmamode = cmd64x_set_dmamode,
.mode_filter = ata_pci_default_filter,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = cmd64x_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_pio_data_xfer,
+ .data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
.port_start = ata_port_start,
- .port_stop = ata_port_stop,
- .host_stop = ata_host_stop
};
static struct ata_port_operations cmd646r1_port_ops = {
- .port_disable = ata_port_disable,
.set_piomode = cmd64x_set_piomode,
.set_dmamode = cmd64x_set_dmamode,
.mode_filter = ata_pci_default_filter,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = cmd64x_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_pio_data_xfer,
+ .data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
.port_start = ata_port_start,
- .port_stop = ata_port_stop,
- .host_stop = ata_host_stop
};
static struct ata_port_operations cmd648_port_ops = {
- .port_disable = ata_port_disable,
.set_piomode = cmd64x_set_piomode,
.set_dmamode = cmd64x_set_dmamode,
.mode_filter = ata_pci_default_filter,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = cmd648_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = cmd648_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_pio_data_xfer,
+ .data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
.port_start = ata_port_start,
- .port_stop = ata_port_stop,
- .host_stop = ata_host_stop
};
static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
u32 class_rev;
- static struct ata_port_info cmd_info[6] = {
+ static const struct ata_port_info cmd_info[6] = {
{ /* CMD 643 - no UDMA */
.sht = &cmd64x_sht,
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &cmd64x_port_ops
},
{ /* CMD 646 with broken UDMA */
.sht = &cmd64x_sht,
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &cmd64x_port_ops
},
{ /* CMD 646 with working UDMA */
.sht = &cmd64x_sht,
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
- .udma_mask = ATA_UDMA1,
+ .udma_mask = ATA_UDMA2,
.port_ops = &cmd64x_port_ops
},
{ /* CMD 646 rev 1 */
.sht = &cmd64x_sht,
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &cmd646r1_port_ops
},
{ /* CMD 648 */
.sht = &cmd64x_sht,
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
- .udma_mask = ATA_UDMA2,
+ .udma_mask = ATA_UDMA4,
.port_ops = &cmd648_port_ops
},
{ /* CMD 649 */
.sht = &cmd64x_sht,
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
- .udma_mask = ATA_UDMA3,
+ .udma_mask = ATA_UDMA5,
.port_ops = &cmd648_port_ops
}
};
- static struct ata_port_info *port_info[2], *info;
+ const struct ata_port_info *ppi[] = { &cmd_info[id->driver_data], NULL };
u8 mrdmode;
- info = &cmd_info[id->driver_data];
-
pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xFF;
if (pdev->device == PCI_DEVICE_ID_CMD_646) {
/* Does UDMA work ? */
if (class_rev > 4)
- info = &cmd_info[2];
+ ppi[0] = &cmd_info[2];
/* Early rev with other problems ? */
else if (class_rev == 1)
- info = &cmd_info[3];
+ ppi[0] = &cmd_info[3];
}
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
#endif
- port_info[0] = port_info[1] = info;
- return ata_pci_init_one(pdev, port_info, 2);
+ return ata_pci_init_one(pdev, ppi);
}
+#ifdef CONFIG_PM
static int cmd64x_reinit_one(struct pci_dev *pdev)
{
u8 mrdmode;
#endif
return ata_pci_device_resume(pdev);
}
+#endif
static const struct pci_device_id cmd64x[] = {
{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 },
.id_table = cmd64x,
.probe = cmd64x_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = cmd64x_reinit_one,
+#endif
};
static int __init cmd64x_init(void)
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff