*/
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/libata.h>
#include <linux/highmem.h>
.qc_prep = ata_sff_qc_prep,
.qc_issue = ata_sff_qc_issue,
+ .qc_fill_rtf = ata_sff_qc_fill_rtf,
.freeze = ata_sff_freeze,
.thaw = ata_sff_thaw,
.softreset = ata_sff_softreset,
.hardreset = sata_sff_hardreset,
.postreset = ata_sff_postreset,
+ .drain_fifo = ata_sff_drain_fifo,
.error_handler = ata_sff_error_handler,
.post_internal_cmd = ata_sff_post_internal_cmd,
.sff_tf_read = ata_sff_tf_read,
.sff_exec_command = ata_sff_exec_command,
.sff_data_xfer = ata_sff_data_xfer,
- .sff_irq_on = ata_sff_irq_on,
.sff_irq_clear = ata_sff_irq_clear,
+ .lost_interrupt = ata_sff_lost_interrupt,
+
.port_start = ata_sff_port_start,
};
+EXPORT_SYMBOL_GPL(ata_sff_port_ops);
const struct ata_port_operations ata_bmdma_port_ops = {
.inherits = &ata_sff_port_ops,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
};
+EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
+
+const struct ata_port_operations ata_bmdma32_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+
+ .sff_data_xfer = ata_sff_data_xfer32,
+ .port_start = ata_sff_port_start32,
+};
+EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops);
/**
* ata_fill_sg - Fill PCI IDE PRD table
blen = len & 0xffff;
ap->prd[pi].addr = cpu_to_le32(addr);
if (blen == 0) {
- /* Some PATA chipsets like the CS5530 can't
- cope with 0x0000 meaning 64K as the spec says */
+ /* Some PATA chipsets like the CS5530 can't
+ cope with 0x0000 meaning 64K as the spec
+ says */
ap->prd[pi].flags_len = cpu_to_le32(0x8000);
blen = 0x8000;
ap->prd[++pi].addr = cpu_to_le32(addr + 0x8000);
ata_fill_sg(qc);
}
+EXPORT_SYMBOL_GPL(ata_sff_qc_prep);
/**
* ata_sff_dumb_qc_prep - Prepare taskfile for submission
ata_fill_sg_dumb(qc);
}
+EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep);
/**
* ata_sff_check_status - Read device status reg & clear interrupt
{
return ioread8(ap->ioaddr.status_addr);
}
+EXPORT_SYMBOL_GPL(ata_sff_check_status);
/**
* ata_sff_altstatus - Read device alternate status reg
* LOCKING:
* Inherited from caller.
*/
-u8 ata_sff_altstatus(struct ata_port *ap)
+static u8 ata_sff_altstatus(struct ata_port *ap)
{
if (ap->ops->sff_check_altstatus)
return ap->ops->sff_check_altstatus(ap);
}
/**
+ * ata_sff_irq_status - Check if the device is busy
+ * @ap: port where the device is
+ *
+ * Determine if the port is currently busy. Uses altstatus
+ * if available in order to avoid clearing shared IRQ status
+ * when finding an IRQ source. Non ctl capable devices don't
+ * share interrupt lines fortunately for us.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static u8 ata_sff_irq_status(struct ata_port *ap)
+{
+ u8 status;
+
+ if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) {
+ status = ata_sff_altstatus(ap);
+ /* Not us: We are busy */
+ if (status & ATA_BUSY)
+ return status;
+ }
+ /* Clear INTRQ latch */
+ status = ap->ops->sff_check_status(ap);
+ return status;
+}
+
+/**
+ * ata_sff_sync - Flush writes
+ * @ap: Port to wait for.
+ *
+ * CAUTION:
+ * If we have an mmio device with no ctl and no altstatus
+ * method this will fail. No such devices are known to exist.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+static void ata_sff_sync(struct ata_port *ap)
+{
+ if (ap->ops->sff_check_altstatus)
+ ap->ops->sff_check_altstatus(ap);
+ else if (ap->ioaddr.altstatus_addr)
+ ioread8(ap->ioaddr.altstatus_addr);
+}
+
+/**
+ * ata_sff_pause - Flush writes and wait 400nS
+ * @ap: Port to pause for.
+ *
+ * CAUTION:
+ * If we have an mmio device with no ctl and no altstatus
+ * method this will fail. No such devices are known to exist.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+void ata_sff_pause(struct ata_port *ap)
+{
+ ata_sff_sync(ap);
+ ndelay(400);
+}
+EXPORT_SYMBOL_GPL(ata_sff_pause);
+
+/**
+ * ata_sff_dma_pause - Pause before commencing DMA
+ * @ap: Port to pause for.
+ *
+ * Perform I/O fencing and ensure sufficient cycle delays occur
+ * for the HDMA1:0 transition
+ */
+
+void ata_sff_dma_pause(struct ata_port *ap)
+{
+ if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) {
+ /* An altstatus read will cause the needed delay without
+ messing up the IRQ status */
+ ata_sff_altstatus(ap);
+ return;
+ }
+ /* There are no DMA controllers without ctl. BUG here to ensure
+ we never violate the HDMA1:0 transition timing and risk
+ corruption. */
+ BUG();
+}
+EXPORT_SYMBOL_GPL(ata_sff_dma_pause);
+
+/**
* ata_sff_busy_sleep - sleep until BSY clears, or timeout
* @ap: port containing status register to be polled
- * @tmout_pat: impatience timeout
- * @tmout: overall timeout
+ * @tmout_pat: impatience timeout in msecs
+ * @tmout: overall timeout in msecs
*
* Sleep until ATA Status register bit BSY clears,
* or a timeout occurs.
status = ata_sff_busy_wait(ap, ATA_BUSY, 300);
timer_start = jiffies;
- timeout = timer_start + tmout_pat;
+ timeout = ata_deadline(timer_start, tmout_pat);
while (status != 0xff && (status & ATA_BUSY) &&
time_before(jiffies, timeout)) {
msleep(50);
"port is slow to respond, please be patient "
"(Status 0x%x)\n", status);
- timeout = timer_start + tmout;
+ timeout = ata_deadline(timer_start, tmout);
while (status != 0xff && (status & ATA_BUSY) &&
time_before(jiffies, timeout)) {
msleep(50);
if (status & ATA_BUSY) {
ata_port_printk(ap, KERN_ERR, "port failed to respond "
"(%lu secs, Status 0x%x)\n",
- tmout / HZ, status);
+ DIV_ROUND_UP(tmout, 1000), status);
return -EBUSY;
}
return 0;
}
+EXPORT_SYMBOL_GPL(ata_sff_busy_sleep);
static int ata_sff_check_ready(struct ata_link *link)
{
u8 status = link->ap->ops->sff_check_status(link->ap);
- if (!(status & ATA_BUSY))
- return 1;
- if (status == 0xff)
- return -ENODEV;
- return 0;
+ return ata_check_ready(status);
}
/**
{
return ata_wait_ready(link, deadline, ata_sff_check_ready);
}
+EXPORT_SYMBOL_GPL(ata_sff_wait_ready);
+
+/**
+ * ata_sff_set_devctl - Write device control reg
+ * @ap: port where the device is
+ * @ctl: value to write
+ *
+ * Writes ATA taskfile device control register.
+ *
+ * Note: may NOT be used as the sff_set_devctl() entry in
+ * ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void ata_sff_set_devctl(struct ata_port *ap, u8 ctl)
+{
+ if (ap->ops->sff_set_devctl)
+ ap->ops->sff_set_devctl(ap, ctl);
+ else
+ iowrite8(ctl, ap->ioaddr.ctl_addr);
+}
/**
* ata_sff_dev_select - Select device 0/1 on ATA bus
iowrite8(tmp, ap->ioaddr.device_addr);
ata_sff_pause(ap); /* needed; also flushes, for mmio */
}
+EXPORT_SYMBOL_GPL(ata_sff_dev_select);
/**
* ata_dev_select - Select device 0/1 on ATA bus
* Enable interrupts on a legacy IDE device using MMIO or PIO,
* wait for idle, clear any pending interrupts.
*
+ * Note: may NOT be used as the sff_irq_on() entry in
+ * ata_port_operations.
+ *
* LOCKING:
* Inherited from caller.
*/
-u8 ata_sff_irq_on(struct ata_port *ap)
+void ata_sff_irq_on(struct ata_port *ap)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- u8 tmp;
+
+ if (ap->ops->sff_irq_on) {
+ ap->ops->sff_irq_on(ap);
+ return;
+ }
ap->ctl &= ~ATA_NIEN;
ap->last_ctl = ap->ctl;
- if (ioaddr->ctl_addr)
- iowrite8(ap->ctl, ioaddr->ctl_addr);
- tmp = ata_wait_idle(ap);
+ if (ap->ops->sff_set_devctl || ioaddr->ctl_addr)
+ ata_sff_set_devctl(ap, ap->ctl);
+ ata_wait_idle(ap);
ap->ops->sff_irq_clear(ap);
-
- return tmp;
}
+EXPORT_SYMBOL_GPL(ata_sff_irq_on);
/**
* ata_sff_irq_clear - Clear PCI IDE BMDMA interrupt.
iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
}
+EXPORT_SYMBOL_GPL(ata_sff_irq_clear);
/**
* ata_sff_tf_load - send taskfile registers to host controller
}
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
- WARN_ON(!ioaddr->ctl_addr);
+ WARN_ON_ONCE(!ioaddr->ctl_addr);
iowrite8(tf->hob_feature, ioaddr->feature_addr);
iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
ata_wait_idle(ap);
}
+EXPORT_SYMBOL_GPL(ata_sff_tf_load);
/**
* ata_sff_tf_read - input device's ATA taskfile shadow registers
iowrite8(tf->ctl, ioaddr->ctl_addr);
ap->last_ctl = tf->ctl;
} else
- WARN_ON(1);
+ WARN_ON_ONCE(1);
}
}
+EXPORT_SYMBOL_GPL(ata_sff_tf_read);
/**
* ata_sff_exec_command - issue ATA command to host controller
iowrite8(tf->command, ap->ioaddr.command_addr);
ata_sff_pause(ap);
}
+EXPORT_SYMBOL_GPL(ata_sff_exec_command);
/**
* ata_tf_to_host - issue ATA taskfile to host controller
else
iowrite16_rep(data_addr, buf, words);
- /* Transfer trailing 1 byte, if any. */
+ /* Transfer trailing byte, if any. */
if (unlikely(buflen & 0x01)) {
- __le16 align_buf[1] = { 0 };
- unsigned char *trailing_buf = buf + buflen - 1;
+ unsigned char pad[2];
+ /* Point buf to the tail of buffer */
+ buf += buflen - 1;
+
+ /*
+ * Use io*16_rep() accessors here as well to avoid pointlessly
+ * swapping bytes to and from on the big endian machines...
+ */
if (rw == READ) {
- align_buf[0] = cpu_to_le16(ioread16(data_addr));
- memcpy(trailing_buf, align_buf, 1);
+ ioread16_rep(data_addr, pad, 1);
+ *buf = pad[0];
} else {
- memcpy(align_buf, trailing_buf, 1);
- iowrite16(le16_to_cpu(align_buf[0]), data_addr);
+ pad[0] = *buf;
+ iowrite16_rep(data_addr, pad, 1);
}
words++;
}
return words << 1;
}
+EXPORT_SYMBOL_GPL(ata_sff_data_xfer);
+
+/**
+ * ata_sff_data_xfer32 - Transfer data by PIO
+ * @dev: device to target
+ * @buf: data buffer
+ * @buflen: buffer length
+ * @rw: read/write
+ *
+ * Transfer data from/to the device data register by PIO using 32bit
+ * I/O operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ *
+ * RETURNS:
+ * Bytes consumed.
+ */
+
+unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf,
+ unsigned int buflen, int rw)
+{
+ struct ata_port *ap = dev->link->ap;
+ void __iomem *data_addr = ap->ioaddr.data_addr;
+ unsigned int words = buflen >> 2;
+ int slop = buflen & 3;
+
+ if (!(ap->pflags & ATA_PFLAG_PIO32))
+ return ata_sff_data_xfer(dev, buf, buflen, rw);
+
+ /* Transfer multiple of 4 bytes */
+ if (rw == READ)
+ ioread32_rep(data_addr, buf, words);
+ else
+ iowrite32_rep(data_addr, buf, words);
+
+ /* Transfer trailing bytes, if any */
+ if (unlikely(slop)) {
+ unsigned char pad[4];
+
+ /* Point buf to the tail of buffer */
+ buf += buflen - slop;
+
+ /*
+ * Use io*_rep() accessors here as well to avoid pointlessly
+ * swapping bytes to and from on the big endian machines...
+ */
+ if (rw == READ) {
+ if (slop < 3)
+ ioread16_rep(data_addr, pad, 1);
+ else
+ ioread32_rep(data_addr, pad, 1);
+ memcpy(buf, pad, slop);
+ } else {
+ memcpy(pad, buf, slop);
+ if (slop < 3)
+ iowrite16_rep(data_addr, pad, 1);
+ else
+ iowrite32_rep(data_addr, pad, 1);
+ }
+ }
+ return (buflen + 1) & ~1;
+}
+EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
/**
* ata_sff_data_xfer_noirq - Transfer data by PIO
return consumed;
}
+EXPORT_SYMBOL_GPL(ata_sff_data_xfer_noirq);
/**
* ata_pio_sector - Transfer a sector of data.
do_write);
}
+ if (!do_write && !PageSlab(page))
+ flush_dcache_page(page);
+
qc->curbytes += qc->sect_size;
qc->cursg_ofs += qc->sect_size;
/* READ/WRITE MULTIPLE */
unsigned int nsect;
- WARN_ON(qc->dev->multi_count == 0);
+ WARN_ON_ONCE(qc->dev->multi_count == 0);
nsect = min((qc->nbytes - qc->curbytes) / qc->sect_size,
qc->dev->multi_count);
} else
ata_pio_sector(qc);
- ata_sff_altstatus(qc->ap); /* flush */
+ ata_sff_sync(qc->ap); /* flush */
}
/**
{
/* send SCSI cdb */
DPRINTK("send cdb\n");
- WARN_ON(qc->dev->cdb_len < 12);
+ WARN_ON_ONCE(qc->dev->cdb_len < 12);
ap->ops->sff_data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1);
- ata_sff_altstatus(ap); /* flush */
-
+ ata_sff_sync(ap);
+ /* FIXME: If the CDB is for DMA do we need to do the transition delay
+ or is bmdma_start guaranteed to do it ? */
switch (qc->tf.protocol) {
case ATAPI_PROT_PIO:
ap->hsm_task_state = HSM_ST;
buf = kmap_atomic(page, KM_IRQ0);
/* do the actual data transfer */
- consumed = ap->ops->sff_data_xfer(dev, buf + offset, count, rw);
+ consumed = ap->ops->sff_data_xfer(dev, buf + offset,
+ count, rw);
kunmap_atomic(buf, KM_IRQ0);
local_irq_restore(flags);
} else {
buf = page_address(page);
- consumed = ap->ops->sff_data_xfer(dev, buf + offset, count, rw);
+ consumed = ap->ops->sff_data_xfer(dev, buf + offset,
+ count, rw);
}
bytes -= min(bytes, consumed);
qc->cursg_ofs = 0;
}
- /* consumed can be larger than count only for the last transfer */
- WARN_ON(qc->cursg && count != consumed);
-
+ /*
+ * There used to be a WARN_ON_ONCE(qc->cursg && count != consumed);
+ * Unfortunately __atapi_pio_bytes doesn't know enough to do the WARN
+ * check correctly as it doesn't know if it is the last request being
+ * made. Somebody should implement a proper sanity check.
+ */
if (bytes)
goto next_sg;
return 0;
if (unlikely(__atapi_pio_bytes(qc, bytes)))
goto err_out;
- ata_sff_altstatus(ap); /* flush */
+ ata_sff_sync(ap); /* flush */
return;
* RETURNS:
* 1 if ok in workqueue, 0 otherwise.
*/
-static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc)
+static inline int ata_hsm_ok_in_wq(struct ata_port *ap,
+ struct ata_queued_cmd *qc)
{
if (qc->tf.flags & ATA_TFLAG_POLLING)
return 1;
if (ap->hsm_task_state == HSM_ST_FIRST) {
if (qc->tf.protocol == ATA_PROT_PIO &&
- (qc->tf.flags & ATA_TFLAG_WRITE))
+ (qc->tf.flags & ATA_TFLAG_WRITE))
return 1;
if (ata_is_atapi(qc->tf.protocol) &&
- !(qc->dev->flags & ATA_DFLAG_CDB_INTR))
+ !(qc->dev->flags & ATA_DFLAG_CDB_INTR))
return 1;
}
qc = ata_qc_from_tag(ap, qc->tag);
if (qc) {
if (likely(!(qc->err_mask & AC_ERR_HSM))) {
- ap->ops->sff_irq_on(ap);
+ ata_sff_irq_on(ap);
ata_qc_complete(qc);
} else
ata_port_freeze(ap);
} else {
if (in_wq) {
spin_lock_irqsave(ap->lock, flags);
- ap->ops->sff_irq_on(ap);
+ ata_sff_irq_on(ap);
ata_qc_complete(qc);
spin_unlock_irqrestore(ap->lock, flags);
} else
int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
u8 status, int in_wq)
{
+ struct ata_eh_info *ehi = &ap->link.eh_info;
unsigned long flags = 0;
int poll_next;
- WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0);
+ WARN_ON_ONCE((qc->flags & ATA_QCFLAG_ACTIVE) == 0);
/* Make sure ata_sff_qc_issue() does not throw things
* like DMA polling into the workqueue. Notice that
* in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING).
*/
- WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc));
+ WARN_ON_ONCE(in_wq != ata_hsm_ok_in_wq(ap, qc));
fsm_start:
DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
if (likely(status & (ATA_ERR | ATA_DF)))
/* device stops HSM for abort/error */
qc->err_mask |= AC_ERR_DEV;
- else
+ else {
/* HSM violation. Let EH handle this */
+ ata_ehi_push_desc(ehi,
+ "ST_FIRST: !(DRQ|ERR|DF)");
qc->err_mask |= AC_ERR_HSM;
+ }
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
* the CDB.
*/
if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) {
- ata_port_printk(ap, KERN_WARNING,
- "DRQ=1 with device error, "
- "dev_stat 0x%X\n", status);
+ ata_ehi_push_desc(ehi, "ST_FIRST: "
+ "DRQ=1 with device error, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
* let the EH abort the command or reset the device.
*/
if (unlikely(status & (ATA_ERR | ATA_DF))) {
- ata_port_printk(ap, KERN_WARNING, "DRQ=1 with "
- "device error, dev_stat 0x%X\n",
- status);
+ ata_ehi_push_desc(ehi, "ST-ATAPI: "
+ "DRQ=1 with device error, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
/* ATA PIO protocol */
if (unlikely((status & ATA_DRQ) == 0)) {
/* handle BSY=0, DRQ=0 as error */
- if (likely(status & (ATA_ERR | ATA_DF)))
+ if (likely(status & (ATA_ERR | ATA_DF))) {
/* device stops HSM for abort/error */
qc->err_mask |= AC_ERR_DEV;
- else
+
+ /* If diagnostic failed and this is
+ * IDENTIFY, it's likely a phantom
+ * device. Mark hint.
+ */
+ if (qc->dev->horkage &
+ ATA_HORKAGE_DIAGNOSTIC)
+ qc->err_mask |=
+ AC_ERR_NODEV_HINT;
+ } else {
/* HSM violation. Let EH handle this.
* Phantom devices also trigger this
* condition. Mark hint.
*/
+ ata_ehi_push_desc(ehi, "ST-ATA: "
+ "DRQ=0 without device error, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM |
AC_ERR_NODEV_HINT;
+ }
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
status = ata_wait_idle(ap);
}
- if (status & (ATA_BUSY | ATA_DRQ))
+ if (status & (ATA_BUSY | ATA_DRQ)) {
+ ata_ehi_push_desc(ehi, "ST-ATA: "
+ "BUSY|DRQ persists on ERR|DF, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM;
+ }
+
+ /* There are oddball controllers with
+ * status register stuck at 0x7f and
+ * lbal/m/h at zero which makes it
+ * pass all other presence detection
+ * mechanisms we have. Set NODEV_HINT
+ * for it. Kernel bz#7241.
+ */
+ if (status == 0x7f)
+ qc->err_mask |= AC_ERR_NODEV_HINT;
/* ata_pio_sectors() might change the
* state to HSM_ST_LAST. so, the state
DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n",
ap->print_id, qc->dev->devno, status);
- WARN_ON(qc->err_mask);
+ WARN_ON_ONCE(qc->err_mask & (AC_ERR_DEV | AC_ERR_HSM));
ap->hsm_task_state = HSM_ST_IDLE;
break;
case HSM_ST_ERR:
- /* make sure qc->err_mask is available to
- * know what's wrong and recover
- */
- WARN_ON(qc->err_mask == 0);
-
ap->hsm_task_state = HSM_ST_IDLE;
/* complete taskfile transaction */
return poll_next;
}
+EXPORT_SYMBOL_GPL(ata_sff_hsm_move);
void ata_pio_task(struct work_struct *work)
{
int poll_next;
fsm_start:
- WARN_ON(ap->hsm_task_state == HSM_ST_IDLE);
+ WARN_ON_ONCE(ap->hsm_task_state == HSM_ST_IDLE);
/*
* This is purely heuristic. This is a fast path.
break;
case ATA_PROT_DMA:
- WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
+ WARN_ON_ONCE(qc->tf.flags & ATA_TFLAG_POLLING);
ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */
ap->ops->bmdma_setup(qc); /* set up bmdma */
break;
case ATAPI_PROT_DMA:
- WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
+ WARN_ON_ONCE(qc->tf.flags & ATA_TFLAG_POLLING);
ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */
ap->ops->bmdma_setup(qc); /* set up bmdma */
break;
default:
- WARN_ON(1);
+ WARN_ON_ONCE(1);
return AC_ERR_SYSTEM;
}
return 0;
}
+EXPORT_SYMBOL_GPL(ata_sff_qc_issue);
+
+/**
+ * ata_sff_qc_fill_rtf - fill result TF using ->sff_tf_read
+ * @qc: qc to fill result TF for
+ *
+ * @qc is finished and result TF needs to be filled. Fill it
+ * using ->sff_tf_read.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * true indicating that result TF is successfully filled.
+ */
+bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc)
+{
+ qc->ap->ops->sff_tf_read(qc->ap, &qc->result_tf);
+ return true;
+}
+EXPORT_SYMBOL_GPL(ata_sff_qc_fill_rtf);
/**
* ata_sff_host_intr - Handle host interrupt for given (port, task)
* RETURNS:
* One if interrupt was handled, zero if not (shared irq).
*/
-inline unsigned int ata_sff_host_intr(struct ata_port *ap,
+unsigned int ata_sff_host_intr(struct ata_port *ap,
struct ata_queued_cmd *qc)
{
struct ata_eh_info *ehi = &ap->link.eh_info;
u8 status, host_stat = 0;
+ bool bmdma_stopped = false;
VPRINTK("ata%u: protocol %d task_state %d\n",
ap->print_id, qc->tf.protocol, ap->hsm_task_state);
/* before we do anything else, clear DMA-Start bit */
ap->ops->bmdma_stop(qc);
+ bmdma_stopped = true;
if (unlikely(host_stat & ATA_DMA_ERR)) {
/* error when transfering data to/from memory */
goto idle_irq;
}
- /* check altstatus */
- status = ata_sff_altstatus(ap);
- if (status & ATA_BUSY)
- goto idle_irq;
- /* check main status, clearing INTRQ */
- status = ap->ops->sff_check_status(ap);
- if (unlikely(status & ATA_BUSY))
- goto idle_irq;
+ /* check main status, clearing INTRQ if needed */
+ status = ata_sff_irq_status(ap);
+ if (status & ATA_BUSY) {
+ if (bmdma_stopped) {
+ /* BMDMA engine is already stopped, we're screwed */
+ qc->err_mask |= AC_ERR_HSM;
+ ap->hsm_task_state = HSM_ST_ERR;
+ } else
+ goto idle_irq;
+ }
/* ack bmdma irq events */
ap->ops->sff_irq_clear(ap);
#endif
return 0; /* irq not handled */
}
+EXPORT_SYMBOL_GPL(ata_sff_host_intr);
/**
* ata_sff_interrupt - Default ATA host interrupt handler
irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
+ bool retried = false;
unsigned int i;
- unsigned int handled = 0;
+ unsigned int handled, idle, polling;
unsigned long flags;
/* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */
spin_lock_irqsave(&host->lock, flags);
+retry:
+ handled = idle = polling = 0;
for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap;
+ struct ata_port *ap = host->ports[i];
+ struct ata_queued_cmd *qc;
- ap = host->ports[i];
- if (ap &&
- !(ap->flags & ATA_FLAG_DISABLED)) {
- struct ata_queued_cmd *qc;
+ if (unlikely(ap->flags & ATA_FLAG_DISABLED))
+ continue;
- qc = ata_qc_from_tag(ap, ap->link.active_tag);
- if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
- (qc->flags & ATA_QCFLAG_ACTIVE))
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc) {
+ if (!(qc->tf.flags & ATA_TFLAG_POLLING))
handled |= ata_sff_host_intr(ap, qc);
+ else
+ polling |= 1 << i;
+ } else
+ idle |= 1 << i;
+ }
+
+ /*
+ * If no port was expecting IRQ but the controller is actually
+ * asserting IRQ line, nobody cared will ensue. Check IRQ
+ * pending status if available and clear spurious IRQ.
+ */
+ if (!handled && !retried) {
+ bool retry = false;
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ if (polling & (1 << i))
+ continue;
+
+ if (!ap->ops->sff_irq_check ||
+ !ap->ops->sff_irq_check(ap))
+ continue;
+
+ if (idle & (1 << i)) {
+ ap->ops->sff_check_status(ap);
+ ap->ops->sff_irq_clear(ap);
+ } else {
+ /* clear INTRQ and check if BUSY cleared */
+ if (!(ap->ops->sff_check_status(ap) & ATA_BUSY))
+ retry |= true;
+ /*
+ * With command in flight, we can't do
+ * sff_irq_clear() w/o racing with completion.
+ */
+ }
+ }
+
+ if (retry) {
+ retried = true;
+ goto retry;
}
}
return IRQ_RETVAL(handled);
}
+EXPORT_SYMBOL_GPL(ata_sff_interrupt);
+
+/**
+ * ata_sff_lost_interrupt - Check for an apparent lost interrupt
+ * @ap: port that appears to have timed out
+ *
+ * Called from the libata error handlers when the core code suspects
+ * an interrupt has been lost. If it has complete anything we can and
+ * then return. Interface must support altstatus for this faster
+ * recovery to occur.
+ *
+ * Locking:
+ * Caller holds host lock
+ */
+
+void ata_sff_lost_interrupt(struct ata_port *ap)
+{
+ u8 status;
+ struct ata_queued_cmd *qc;
+
+ /* Only one outstanding command per SFF channel */
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ /* Check we have a live one.. */
+ if (qc == NULL || !(qc->flags & ATA_QCFLAG_ACTIVE))
+ return;
+ /* We cannot lose an interrupt on a polled command */
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ return;
+ /* See if the controller thinks it is still busy - if so the command
+ isn't a lost IRQ but is still in progress */
+ status = ata_sff_altstatus(ap);
+ if (status & ATA_BUSY)
+ return;
+
+ /* There was a command running, we are no longer busy and we have
+ no interrupt. */
+ ata_port_printk(ap, KERN_WARNING, "lost interrupt (Status 0x%x)\n",
+ status);
+ /* Run the host interrupt logic as if the interrupt had not been
+ lost */
+ ata_sff_host_intr(ap, qc);
+}
+EXPORT_SYMBOL_GPL(ata_sff_lost_interrupt);
/**
* ata_sff_freeze - Freeze SFF controller port
*/
void ata_sff_freeze(struct ata_port *ap)
{
- struct ata_ioports *ioaddr = &ap->ioaddr;
-
ap->ctl |= ATA_NIEN;
ap->last_ctl = ap->ctl;
- if (ioaddr->ctl_addr)
- iowrite8(ap->ctl, ioaddr->ctl_addr);
+ if (ap->ops->sff_set_devctl || ap->ioaddr.ctl_addr)
+ ata_sff_set_devctl(ap, ap->ctl);
/* Under certain circumstances, some controllers raise IRQ on
* ATA_NIEN manipulation. Also, many controllers fail to mask
ap->ops->sff_irq_clear(ap);
}
+EXPORT_SYMBOL_GPL(ata_sff_freeze);
/**
* ata_sff_thaw - Thaw SFF controller port
/* clear & re-enable interrupts */
ap->ops->sff_check_status(ap);
ap->ops->sff_irq_clear(ap);
- ap->ops->sff_irq_on(ap);
+ ata_sff_irq_on(ap);
}
+EXPORT_SYMBOL_GPL(ata_sff_thaw);
/**
* ata_sff_prereset - prepare SFF link for reset
return 0;
}
+EXPORT_SYMBOL_GPL(ata_sff_prereset);
/**
* ata_devchk - PATA device presence detection
return class;
}
+EXPORT_SYMBOL_GPL(ata_sff_dev_classify);
/**
* ata_sff_wait_after_reset - wait for devices to become ready after reset
unsigned int dev1 = devmask & (1 << 1);
int rc, ret = 0;
- msleep(ATA_WAIT_AFTER_RESET_MSECS);
+ msleep(ATA_WAIT_AFTER_RESET);
/* always check readiness of the master device */
rc = ata_sff_wait_ready(link, deadline);
return ret;
}
+EXPORT_SYMBOL_GPL(ata_sff_wait_after_reset);
static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
unsigned long deadline)
iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
udelay(20); /* FIXME: flush */
iowrite8(ap->ctl, ioaddr->ctl_addr);
+ ap->last_ctl = ap->ctl;
/* wait the port to become ready */
return ata_sff_wait_after_reset(&ap->link, devmask, deadline);
DPRINTK("ENTER\n");
- if (ata_link_offline(link)) {
- classes[0] = ATA_DEV_NONE;
- goto out;
- }
-
/* determine if device 0/1 are present */
if (ata_devchk(ap, 0))
devmask |= (1 << 0);
classes[1] = ata_sff_dev_classify(&link->device[1],
devmask & (1 << 1), &err);
- out:
DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
return 0;
}
+EXPORT_SYMBOL_GPL(ata_sff_softreset);
/**
* sata_sff_hardreset - reset host port via SATA phy reset
rc = sata_link_hardreset(link, timing, deadline, &online,
ata_sff_check_ready);
- *class = ATA_DEV_NONE;
if (online)
*class = ata_sff_dev_classify(link->device, 1, NULL);
DPRINTK("EXIT, class=%u\n", *class);
return rc;
}
+EXPORT_SYMBOL_GPL(sata_sff_hardreset);
/**
* ata_sff_postreset - SFF postreset callback
}
/* set up device control */
- if (ap->ioaddr.ctl_addr)
- iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
+ if (ap->ops->sff_set_devctl || ap->ioaddr.ctl_addr) {
+ ata_sff_set_devctl(ap, ap->ctl);
+ ap->last_ctl = ap->ctl;
+ }
+}
+EXPORT_SYMBOL_GPL(ata_sff_postreset);
+
+/**
+ * ata_sff_drain_fifo - Stock FIFO drain logic for SFF controllers
+ * @qc: command
+ *
+ * Drain the FIFO and device of any stuck data following a command
+ * failing to complete. In some cases this is necessary before a
+ * reset will recover the device.
+ *
+ */
+
+void ata_sff_drain_fifo(struct ata_queued_cmd *qc)
+{
+ int count;
+ struct ata_port *ap;
+
+ /* We only need to flush incoming data when a command was running */
+ if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE)
+ return;
+
+ ap = qc->ap;
+ /* Drain up to 64K of data before we give up this recovery method */
+ for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ)
+ && count < 65536; count += 2)
+ ioread16(ap->ioaddr.data_addr);
+
+ /* Can become DEBUG later */
+ if (count)
+ ata_port_printk(ap, KERN_DEBUG,
+ "drained %d bytes to clear DRQ.\n", count);
+
}
+EXPORT_SYMBOL_GPL(ata_sff_drain_fifo);
/**
* ata_sff_error_handler - Stock error handler for BMDMA controller
* really a timeout event, adjust error mask and
* cancel frozen state.
*/
- if (qc->err_mask == AC_ERR_TIMEOUT && (host_stat & ATA_DMA_ERR)) {
+ if (qc->err_mask == AC_ERR_TIMEOUT
+ && (host_stat & ATA_DMA_ERR)) {
qc->err_mask = AC_ERR_HOST_BUS;
thaw = 1;
}
ap->ops->bmdma_stop(qc);
}
- ata_sff_altstatus(ap);
+ ata_sff_sync(ap); /* FIXME: We don't need this */
ap->ops->sff_check_status(ap);
ap->ops->sff_irq_clear(ap);
+ /* We *MUST* do FIFO draining before we issue a reset as several
+ * devices helpfully clear their internal state and will lock solid
+ * if we touch the data port post reset. Pass qc in case anyone wants
+ * to do different PIO/DMA recovery or has per command fixups
+ */
+ if (ap->ops->drain_fifo)
+ ap->ops->drain_fifo(qc);
spin_unlock_irqrestore(ap->lock, flags);
ata_do_eh(ap, ap->ops->prereset, softreset, hardreset,
ap->ops->postreset);
}
+EXPORT_SYMBOL_GPL(ata_sff_error_handler);
/**
* ata_sff_post_internal_cmd - Stock post_internal_cmd for SFF controller
*/
void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc)
{
- if (qc->ap->ioaddr.bmdma_addr)
- ata_bmdma_stop(qc);
+ struct ata_port *ap = qc->ap;
+ unsigned long flags;
+
+ spin_lock_irqsave(ap->lock, flags);
+
+ ap->hsm_task_state = HSM_ST_IDLE;
+
+ if (ap->ioaddr.bmdma_addr)
+ ap->ops->bmdma_stop(qc);
+
+ spin_unlock_irqrestore(ap->lock, flags);
}
+EXPORT_SYMBOL_GPL(ata_sff_post_internal_cmd);
/**
* ata_sff_port_start - Set port up for dma.
return ata_port_start(ap);
return 0;
}
+EXPORT_SYMBOL_GPL(ata_sff_port_start);
+
+/**
+ * ata_sff_port_start32 - Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Allocates space for PRD table if the device
+ * is DMA capable SFF.
+ *
+ * May be used as the port_start() entry in ata_port_operations for
+ * devices that are capable of 32bit PIO.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+int ata_sff_port_start32(struct ata_port *ap)
+{
+ ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
+ if (ap->ioaddr.bmdma_addr)
+ return ata_port_start(ap);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_sff_port_start32);
/**
* ata_sff_std_ports - initialize ioaddr with standard port offsets.
ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS;
ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD;
}
+EXPORT_SYMBOL_GPL(ata_sff_std_ports);
unsigned long ata_bmdma_mode_filter(struct ata_device *adev,
unsigned long xfer_mask)
xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
return xfer_mask;
}
+EXPORT_SYMBOL_GPL(ata_bmdma_mode_filter);
/**
* ata_bmdma_setup - Set up PCI IDE BMDMA transaction
/* issue r/w command */
ap->ops->sff_exec_command(ap, &qc->tf);
}
+EXPORT_SYMBOL_GPL(ata_bmdma_setup);
/**
* ata_bmdma_start - Start a PCI IDE BMDMA transaction
* unneccessarily delayed for MMIO
*/
}
+EXPORT_SYMBOL_GPL(ata_bmdma_start);
/**
* ata_bmdma_stop - Stop PCI IDE BMDMA transfer
mmio + ATA_DMA_CMD);
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_sff_altstatus(ap); /* dummy read */
+ ata_sff_dma_pause(ap);
}
+EXPORT_SYMBOL_GPL(ata_bmdma_stop);
/**
* ata_bmdma_status - Read PCI IDE BMDMA status
{
return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
}
-
-/**
- * ata_bus_reset - reset host port and associated ATA channel
- * @ap: port to reset
- *
- * This is typically the first time we actually start issuing
- * commands to the ATA channel. We wait for BSY to clear, then
- * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its
- * result. Determine what devices, if any, are on the channel
- * by looking at the device 0/1 error register. Look at the signature
- * stored in each device's taskfile registers, to determine if
- * the device is ATA or ATAPI.
- *
- * LOCKING:
- * PCI/etc. bus probe sem.
- * Obtains host lock.
- *
- * SIDE EFFECTS:
- * Sets ATA_FLAG_DISABLED if bus reset fails.
- *
- * DEPRECATED:
- * This function is only for drivers which still use old EH and
- * will be removed soon.
- */
-void ata_bus_reset(struct ata_port *ap)
-{
- struct ata_device *device = ap->link.device;
- struct ata_ioports *ioaddr = &ap->ioaddr;
- unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
- u8 err;
- unsigned int dev0, dev1 = 0, devmask = 0;
- int rc;
-
- DPRINTK("ENTER, host %u, port %u\n", ap->print_id, ap->port_no);
-
- /* determine if device 0/1 are present */
- if (ap->flags & ATA_FLAG_SATA_RESET)
- dev0 = 1;
- else {
- dev0 = ata_devchk(ap, 0);
- if (slave_possible)
- dev1 = ata_devchk(ap, 1);
- }
-
- if (dev0)
- devmask |= (1 << 0);
- if (dev1)
- devmask |= (1 << 1);
-
- /* select device 0 again */
- ap->ops->sff_dev_select(ap, 0);
-
- /* issue bus reset */
- if (ap->flags & ATA_FLAG_SRST) {
- rc = ata_bus_softreset(ap, devmask, jiffies + 40 * HZ);
- if (rc && rc != -ENODEV)
- goto err_out;
- }
-
- /*
- * determine by signature whether we have ATA or ATAPI devices
- */
- device[0].class = ata_sff_dev_classify(&device[0], dev0, &err);
- if ((slave_possible) && (err != 0x81))
- device[1].class = ata_sff_dev_classify(&device[1], dev1, &err);
-
- /* is double-select really necessary? */
- if (device[1].class != ATA_DEV_NONE)
- ap->ops->sff_dev_select(ap, 1);
- if (device[0].class != ATA_DEV_NONE)
- ap->ops->sff_dev_select(ap, 0);
-
- /* if no devices were detected, disable this port */
- if ((device[0].class == ATA_DEV_NONE) &&
- (device[1].class == ATA_DEV_NONE))
- goto err_out;
-
- if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) {
- /* set up device control for ATA_FLAG_SATA_RESET */
- iowrite8(ap->ctl, ioaddr->ctl_addr);
- }
-
- DPRINTK("EXIT\n");
- return;
-
-err_out:
- ata_port_printk(ap, KERN_ERR, "disabling port\n");
- ata_port_disable(ap);
-
- DPRINTK("EXIT\n");
-}
+EXPORT_SYMBOL_GPL(ata_bmdma_status);
#ifdef CONFIG_PCI
return -EOPNOTSUPP;
return 0;
}
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
/**
* ata_pci_bmdma_init - acquire PCI BMDMA resources and init ATA host
host->flags |= ATA_HOST_SIMPLEX;
ata_port_desc(ap, "bmdma 0x%llx",
- (unsigned long long)pci_resource_start(pdev, 4) + 8 * i);
+ (unsigned long long)pci_resource_start(pdev, 4) + 8 * i);
}
return 0;
}
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
static int ata_resources_present(struct pci_dev *pdev, int port)
{
/* Check the PCI resources for this channel are enabled */
port = port * 2;
- for (i = 0; i < 2; i ++) {
+ for (i = 0; i < 2; i++) {
if (pci_resource_start(pdev, port + i) == 0 ||
pci_resource_len(pdev, port + i) == 0)
return 0;
return 0;
}
+EXPORT_SYMBOL_GPL(ata_pci_sff_init_host);
/**
* ata_pci_sff_prepare_host - helper to prepare native PCI ATA host
* 0 on success, -errno otherwise.
*/
int ata_pci_sff_prepare_host(struct pci_dev *pdev,
- const struct ata_port_info * const * ppi,
+ const struct ata_port_info * const *ppi,
struct ata_host **r_host)
{
struct ata_host *host;
*r_host = host;
return 0;
- err_bmdma:
+err_bmdma:
/* This is necessary because PCI and iomap resources are
* merged and releasing the top group won't release the
* acquired resources if some of those have been acquired
* before entering this function.
*/
pcim_iounmap_regions(pdev, 0xf);
- err_out:
+err_out:
devres_release_group(&pdev->dev, NULL);
return rc;
}
+EXPORT_SYMBOL_GPL(ata_pci_sff_prepare_host);
/**
* ata_pci_sff_activate_host - start SFF host, request IRQ and register it
}
rc = ata_host_register(host, sht);
- out:
+out:
if (rc == 0)
devres_remove_group(dev, NULL);
else
return rc;
}
+EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host);
/**
* ata_pci_sff_init_one - Initialize/register PCI IDE host controller
* @ppi: array of port_info, must be enough for two ports
* @sht: scsi_host_template to use when registering the host
* @host_priv: host private_data
+ * @hflag: host flags
*
* This is a helper function which can be called from a driver's
* xxx_init_one() probe function if the hardware uses traditional
* Zero on success, negative on errno-based value on error.
*/
int ata_pci_sff_init_one(struct pci_dev *pdev,
- const struct ata_port_info * const * ppi,
- struct scsi_host_template *sht, void *host_priv)
+ const struct ata_port_info * const *ppi,
+ struct scsi_host_template *sht, void *host_priv, int hflag)
{
struct device *dev = &pdev->dev;
const struct ata_port_info *pi = NULL;
if (rc)
goto out;
host->private_data = host_priv;
+ host->flags |= hflag;
pci_set_master(pdev);
rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
- out:
+out:
if (rc == 0)
devres_remove_group(&pdev->dev, NULL);
else
return rc;
}
-
-#endif /* CONFIG_PCI */
-
-EXPORT_SYMBOL_GPL(ata_sff_port_ops);
-EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
-EXPORT_SYMBOL_GPL(ata_sff_qc_prep);
-EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep);
-EXPORT_SYMBOL_GPL(ata_sff_dev_select);
-EXPORT_SYMBOL_GPL(ata_sff_check_status);
-EXPORT_SYMBOL_GPL(ata_sff_altstatus);
-EXPORT_SYMBOL_GPL(ata_sff_busy_sleep);
-EXPORT_SYMBOL_GPL(ata_sff_wait_ready);
-EXPORT_SYMBOL_GPL(ata_sff_tf_load);
-EXPORT_SYMBOL_GPL(ata_sff_tf_read);
-EXPORT_SYMBOL_GPL(ata_sff_exec_command);
-EXPORT_SYMBOL_GPL(ata_sff_data_xfer);
-EXPORT_SYMBOL_GPL(ata_sff_data_xfer_noirq);
-EXPORT_SYMBOL_GPL(ata_sff_irq_on);
-EXPORT_SYMBOL_GPL(ata_sff_irq_clear);
-EXPORT_SYMBOL_GPL(ata_sff_hsm_move);
-EXPORT_SYMBOL_GPL(ata_sff_qc_issue);
-EXPORT_SYMBOL_GPL(ata_sff_host_intr);
-EXPORT_SYMBOL_GPL(ata_sff_interrupt);
-EXPORT_SYMBOL_GPL(ata_sff_freeze);
-EXPORT_SYMBOL_GPL(ata_sff_thaw);
-EXPORT_SYMBOL_GPL(ata_sff_prereset);
-EXPORT_SYMBOL_GPL(ata_sff_dev_classify);
-EXPORT_SYMBOL_GPL(ata_sff_wait_after_reset);
-EXPORT_SYMBOL_GPL(ata_sff_softreset);
-EXPORT_SYMBOL_GPL(sata_sff_hardreset);
-EXPORT_SYMBOL_GPL(ata_sff_postreset);
-EXPORT_SYMBOL_GPL(ata_sff_error_handler);
-EXPORT_SYMBOL_GPL(ata_sff_post_internal_cmd);
-EXPORT_SYMBOL_GPL(ata_sff_port_start);
-EXPORT_SYMBOL_GPL(ata_sff_std_ports);
-EXPORT_SYMBOL_GPL(ata_bmdma_mode_filter);
-EXPORT_SYMBOL_GPL(ata_bmdma_setup);
-EXPORT_SYMBOL_GPL(ata_bmdma_start);
-EXPORT_SYMBOL_GPL(ata_bmdma_stop);
-EXPORT_SYMBOL_GPL(ata_bmdma_status);
-EXPORT_SYMBOL_GPL(ata_bus_reset);
-#ifdef CONFIG_PCI
-EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
-EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
-EXPORT_SYMBOL_GPL(ata_pci_sff_init_host);
-EXPORT_SYMBOL_GPL(ata_pci_sff_prepare_host);
-EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host);
EXPORT_SYMBOL_GPL(ata_pci_sff_init_one);
+
#endif /* CONFIG_PCI */