return qc;
}
+static void ata_qc_set_pc_nbytes(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+
+ qc->extrabytes = scmd->request->extra_len;
+ qc->nbytes = scsi_bufflen(scmd) + qc->extrabytes;
+}
+
/**
* ata_dump_status - user friendly display of error info
* @id: id of the port in question
sdev->max_device_blocked = 1;
}
-static void ata_scsi_dev_config(struct scsi_device *sdev,
- struct ata_device *dev)
+/**
+ * atapi_drain_needed - Check whether data transfer may overflow
+ * @rq: request to be checked
+ *
+ * ATAPI commands which transfer variable length data to host
+ * might overflow due to application error or hardare bug. This
+ * function checks whether overflow should be drained and ignored
+ * for @request.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 1 if ; otherwise, 0.
+ */
+static int atapi_drain_needed(struct request *rq)
+{
+ if (likely(!blk_pc_request(rq)))
+ return 0;
+
+ if (!rq->data_len || (rq->cmd_flags & REQ_RW))
+ return 0;
+
+ return atapi_cmd_type(rq->cmd[0]) == ATAPI_MISC;
+}
+
+static int ata_scsi_dev_config(struct scsi_device *sdev,
+ struct ata_device *dev)
{
/* configure max sectors */
blk_queue_max_sectors(sdev->request_queue, dev->max_sectors);
- /* SATA DMA transfers must be multiples of 4 byte, so
- * we need to pad ATAPI transfers using an extra sg.
- * Decrement max hw segments accordingly.
- */
if (dev->class == ATA_DEV_ATAPI) {
struct request_queue *q = sdev->request_queue;
- blk_queue_max_hw_segments(q, q->max_hw_segments - 1);
- }
+ void *buf;
+
+ /* set the min alignment and padding */
+ blk_queue_update_dma_alignment(sdev->request_queue,
+ ATA_DMA_PAD_SZ - 1);
+ blk_queue_dma_pad(sdev->request_queue, ATA_DMA_PAD_SZ - 1);
+
+ /* configure draining */
+ buf = kmalloc(ATAPI_MAX_DRAIN, q->bounce_gfp | GFP_KERNEL);
+ if (!buf) {
+ ata_dev_printk(dev, KERN_ERR,
+ "drain buffer allocation failed\n");
+ return -ENOMEM;
+ }
- if (dev->class == ATA_DEV_ATA)
+ blk_queue_dma_drain(q, atapi_drain_needed, buf, ATAPI_MAX_DRAIN);
+ } else {
+ /* ATA devices must be sector aligned */
+ blk_queue_update_dma_alignment(sdev->request_queue,
+ ATA_SECT_SIZE - 1);
sdev->manage_start_stop = 1;
+ }
if (dev->flags & ATA_DFLAG_AN)
set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events);
depth = min(ATA_MAX_QUEUE - 1, depth);
scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth);
}
+
+ return 0;
}
/**
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
struct ata_device *dev = __ata_scsi_find_dev(ap, sdev);
+ int rc = 0;
ata_scsi_sdev_config(sdev);
if (dev)
- ata_scsi_dev_config(sdev, dev);
+ rc = ata_scsi_dev_config(sdev, dev);
- return 0; /* scsi layer doesn't check return value, sigh */
+ return rc;
}
/**
void ata_scsi_slave_destroy(struct scsi_device *sdev)
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
+ struct request_queue *q = sdev->request_queue;
unsigned long flags;
struct ata_device *dev;
ata_port_schedule_eh(ap);
}
spin_unlock_irqrestore(ap->lock, flags);
+
+ kfree(q->dma_drain_buffer);
+ q->dma_drain_buffer = NULL;
+ q->dma_drain_size = 0;
}
/**
u8 *rbuf;
unsigned int buflen, rc;
struct scsi_cmnd *cmd = args->cmd;
+ unsigned long flags;
+
+ local_irq_save(flags);
buflen = ata_scsi_rbuf_get(cmd, &rbuf);
memset(rbuf, 0, buflen);
rc = actor(args, rbuf, buflen);
ata_scsi_rbuf_put(cmd, rbuf);
+ local_irq_restore(flags);
+
if (rc == 0)
cmd->result = SAM_STAT_GOOD;
args->done(cmd);
* spin_lock_irqsave(host lock)
*/
-unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf,
+static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen)
{
u8 pbuf[60];
if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) {
u8 *buf = NULL;
unsigned int buflen;
+ unsigned long flags;
+
+ local_irq_save(flags);
buflen = ata_scsi_rbuf_get(cmd, &buf);
}
ata_scsi_rbuf_put(cmd, buf);
+
+ local_irq_restore(flags);
}
cmd->result = SAM_STAT_GOOD;
}
qc->tf.command = ATA_CMD_PACKET;
- qc->nbytes = scsi_bufflen(scmd);
+ ata_qc_set_pc_nbytes(qc);
/* check whether ATAPI DMA is safe */
if (!using_pio && ata_check_atapi_dma(qc))
* want to set it properly, and for DMA where it is
* effectively meaningless.
*/
- nbytes = min(qc->nbytes, (unsigned int)63 * 1024);
+ nbytes = min(ata_qc_raw_nbytes(qc), (unsigned int)63 * 1024);
/* Most ATAPI devices which honor transfer chunk size don't
* behave according to the spec when odd chunk size which
qc->tf.protocol = ATAPI_PROT_DMA;
qc->tf.feature |= ATAPI_PKT_DMA;
- if (atapi_dmadir && (scmd->sc_data_direction != DMA_TO_DEVICE))
+ if ((dev->flags & ATA_DFLAG_DMADIR) &&
+ (scmd->sc_data_direction != DMA_TO_DEVICE))
/* some SATA bridges need us to indicate data xfer direction */
qc->tf.feature |= ATAPI_DMADIR;
}
* TODO: find out if we need to do more here to
* cover scatter/gather case.
*/
- qc->nbytes = scsi_bufflen(scmd);
+ ata_qc_set_pc_nbytes(qc);
/* request result TF and be quiet about device error */
qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET;
ata_port_for_each_link(link, ap) {
struct ata_eh_info *ehi = &link->eh_info;
- ehi->probe_mask |= (1 << ata_link_max_devices(link)) - 1;
- ehi->action |= ATA_EH_SOFTRESET;
+ ehi->probe_mask |= ATA_ALL_DEVICES;
+ ehi->action |= ATA_EH_RESET;
}
} else {
struct ata_device *dev = ata_find_dev(ap, devno);
if (dev) {
struct ata_eh_info *ehi = &dev->link->eh_info;
ehi->probe_mask |= 1 << dev->devno;
- ehi->action |= ATA_EH_SOFTRESET;
- ehi->flags |= ATA_EHI_RESUME_LINK;
+ ehi->action |= ATA_EH_RESET;
} else
rc = -EINVAL;
}
* @ap: Port to initialize
*
* Called just after data structures for each port are
- * initialized. Allocates DMA pad.
+ * initialized.
*
* May be used as the port_start() entry in ata_port_operations.
*
*/
int ata_sas_port_start(struct ata_port *ap)
{
- return ata_pad_alloc(ap, ap->dev);
+ return 0;
}
EXPORT_SYMBOL_GPL(ata_sas_port_start);
* ata_port_stop - Undo ata_sas_port_start()
* @ap: Port to shut down
*
- * Frees the DMA pad.
- *
* May be used as the port_stop() entry in ata_port_operations.
*
* LOCKING:
void ata_sas_port_stop(struct ata_port *ap)
{
- ata_pad_free(ap, ap->dev);
}
EXPORT_SYMBOL_GPL(ata_sas_port_stop);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff