#define SECTOR_SIZE 512
-typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd);
+typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc);
static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap,
const struct scsi_device *scsidev);
{
int rc = 0;
u8 scsi_cmd[MAX_COMMAND_SIZE];
- u8 args[7];
- struct scsi_sense_hdr sshdr;
+ u8 args[7], *sensebuf = NULL;
+ int cmd_result;
if (arg == NULL)
return -EINVAL;
if (copy_from_user(args, arg, sizeof(args)))
return -EFAULT;
+ sensebuf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO);
+ if (!sensebuf)
+ return -ENOMEM;
+
memset(scsi_cmd, 0, sizeof(scsi_cmd));
scsi_cmd[0] = ATA_16;
scsi_cmd[1] = (3 << 1); /* Non-data */
- /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
+ scsi_cmd[2] = 0x20; /* cc but no off.line or data xfer */
scsi_cmd[4] = args[1];
scsi_cmd[6] = args[2];
scsi_cmd[8] = args[3];
/* Good values for timeout and retries? Values below
from scsi_ioctl_send_command() for default case... */
- if (scsi_execute_req(scsidev, scsi_cmd, DMA_NONE, NULL, 0, &sshdr,
- (10*HZ), 5))
+ cmd_result = scsi_execute(scsidev, scsi_cmd, DMA_NONE, NULL, 0,
+ sensebuf, (10*HZ), 5, 0);
+
+ if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */
+ u8 *desc = sensebuf + 8;
+ cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */
+
+ /* If we set cc then ATA pass-through will cause a
+ * check condition even if no error. Filter that. */
+ if (cmd_result & SAM_STAT_CHECK_CONDITION) {
+ struct scsi_sense_hdr sshdr;
+ scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE,
+ &sshdr);
+ if (sshdr.sense_key==0 &&
+ sshdr.asc==0 && sshdr.ascq==0)
+ cmd_result &= ~SAM_STAT_CHECK_CONDITION;
+ }
+
+ /* Send userspace ATA registers */
+ if (sensebuf[0] == 0x72 && /* format is "descriptor" */
+ desc[0] == 0x09) {/* code is "ATA Descriptor" */
+ args[0] = desc[13]; /* status */
+ args[1] = desc[3]; /* error */
+ args[2] = desc[5]; /* sector count (0:7) */
+ args[3] = desc[7]; /* lbal */
+ args[4] = desc[9]; /* lbam */
+ args[5] = desc[11]; /* lbah */
+ args[6] = desc[12]; /* select */
+ if (copy_to_user(arg, args, sizeof(args)))
+ rc = -EFAULT;
+ }
+ }
+
+ if (cmd_result) {
rc = -EIO;
+ goto error;
+ }
- /* Need code to retrieve data from check condition? */
+ error:
+ kfree(sensebuf);
return rc;
}
if (cmd->use_sg) {
qc->__sg = (struct scatterlist *) cmd->request_buffer;
qc->n_elem = cmd->use_sg;
- } else {
+ } else if (cmd->request_bufflen) {
qc->__sg = &qc->sgent;
qc->n_elem = 1;
}
/**
* ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
* @qc: Storage for translated ATA taskfile
- * @scsicmd: SCSI command to translate
*
* Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY
* (to start). Perhaps these commands should be preceded by
* RETURNS:
* Zero on success, non-zero on error.
*/
-
-static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc,
- const u8 *scsicmd)
+static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
{
+ struct scsi_cmnd *scmd = qc->scsicmd;
struct ata_taskfile *tf = &qc->tf;
+ const u8 *cdb = scmd->cmnd;
+
+ if (scmd->cmd_len < 5)
+ goto invalid_fld;
tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
tf->protocol = ATA_PROT_NODATA;
- if (scsicmd[1] & 0x1) {
+ if (cdb[1] & 0x1) {
; /* ignore IMMED bit, violates sat-r05 */
}
- if (scsicmd[4] & 0x2)
+ if (cdb[4] & 0x2)
goto invalid_fld; /* LOEJ bit set not supported */
- if (((scsicmd[4] >> 4) & 0xf) != 0)
+ if (((cdb[4] >> 4) & 0xf) != 0)
goto invalid_fld; /* power conditions not supported */
- if (scsicmd[4] & 0x1) {
+ if (cdb[4] & 0x1) {
tf->nsect = 1; /* 1 sector, lba=0 */
if (qc->dev->flags & ATA_DFLAG_LBA) {
}
tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
- } else {
- tf->nsect = 0; /* time period value (0 implies now) */
- tf->command = ATA_CMD_STANDBY;
- /* Consider: ATA STANDBY IMMEDIATE command */
- }
+ } else
+ /* Issue ATA STANDBY IMMEDIATE command */
+ tf->command = ATA_CMD_STANDBYNOW1;
+
/*
* Standby and Idle condition timers could be implemented but that
* would require libata to implement the Power condition mode page
return 0;
invalid_fld:
- ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
/* "Invalid field in cbd" */
return 1;
}
/**
* ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command
* @qc: Storage for translated ATA taskfile
- * @scsicmd: SCSI command to translate (ignored)
*
* Sets up an ATA taskfile to issue FLUSH CACHE or
* FLUSH CACHE EXT.
* RETURNS:
* Zero on success, non-zero on error.
*/
-
-static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
+static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc)
{
struct ata_taskfile *tf = &qc->tf;
/**
* scsi_6_lba_len - Get LBA and transfer length
- * @scsicmd: SCSI command to translate
+ * @cdb: SCSI command to translate
*
* Calculate LBA and transfer length for 6-byte commands.
*
* @plba: the LBA
* @plen: the transfer length
*/
-
-static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+static void scsi_6_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
{
u64 lba = 0;
u32 len = 0;
VPRINTK("six-byte command\n");
- lba |= ((u64)scsicmd[2]) << 8;
- lba |= ((u64)scsicmd[3]);
+ lba |= ((u64)cdb[2]) << 8;
+ lba |= ((u64)cdb[3]);
- len |= ((u32)scsicmd[4]);
+ len |= ((u32)cdb[4]);
*plba = lba;
*plen = len;
/**
* scsi_10_lba_len - Get LBA and transfer length
- * @scsicmd: SCSI command to translate
+ * @cdb: SCSI command to translate
*
* Calculate LBA and transfer length for 10-byte commands.
*
* @plba: the LBA
* @plen: the transfer length
*/
-
-static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+static void scsi_10_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
{
u64 lba = 0;
u32 len = 0;
VPRINTK("ten-byte command\n");
- lba |= ((u64)scsicmd[2]) << 24;
- lba |= ((u64)scsicmd[3]) << 16;
- lba |= ((u64)scsicmd[4]) << 8;
- lba |= ((u64)scsicmd[5]);
+ lba |= ((u64)cdb[2]) << 24;
+ lba |= ((u64)cdb[3]) << 16;
+ lba |= ((u64)cdb[4]) << 8;
+ lba |= ((u64)cdb[5]);
- len |= ((u32)scsicmd[7]) << 8;
- len |= ((u32)scsicmd[8]);
+ len |= ((u32)cdb[7]) << 8;
+ len |= ((u32)cdb[8]);
*plba = lba;
*plen = len;
/**
* scsi_16_lba_len - Get LBA and transfer length
- * @scsicmd: SCSI command to translate
+ * @cdb: SCSI command to translate
*
* Calculate LBA and transfer length for 16-byte commands.
*
* @plba: the LBA
* @plen: the transfer length
*/
-
-static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+static void scsi_16_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
{
u64 lba = 0;
u32 len = 0;
VPRINTK("sixteen-byte command\n");
- lba |= ((u64)scsicmd[2]) << 56;
- lba |= ((u64)scsicmd[3]) << 48;
- lba |= ((u64)scsicmd[4]) << 40;
- lba |= ((u64)scsicmd[5]) << 32;
- lba |= ((u64)scsicmd[6]) << 24;
- lba |= ((u64)scsicmd[7]) << 16;
- lba |= ((u64)scsicmd[8]) << 8;
- lba |= ((u64)scsicmd[9]);
+ lba |= ((u64)cdb[2]) << 56;
+ lba |= ((u64)cdb[3]) << 48;
+ lba |= ((u64)cdb[4]) << 40;
+ lba |= ((u64)cdb[5]) << 32;
+ lba |= ((u64)cdb[6]) << 24;
+ lba |= ((u64)cdb[7]) << 16;
+ lba |= ((u64)cdb[8]) << 8;
+ lba |= ((u64)cdb[9]);
- len |= ((u32)scsicmd[10]) << 24;
- len |= ((u32)scsicmd[11]) << 16;
- len |= ((u32)scsicmd[12]) << 8;
- len |= ((u32)scsicmd[13]);
+ len |= ((u32)cdb[10]) << 24;
+ len |= ((u32)cdb[11]) << 16;
+ len |= ((u32)cdb[12]) << 8;
+ len |= ((u32)cdb[13]);
*plba = lba;
*plen = len;
/**
* ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one
* @qc: Storage for translated ATA taskfile
- * @scsicmd: SCSI command to translate
*
* Converts SCSI VERIFY command to an ATA READ VERIFY command.
*
* RETURNS:
* Zero on success, non-zero on error.
*/
-
-static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
+static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc)
{
+ struct scsi_cmnd *scmd = qc->scsicmd;
struct ata_taskfile *tf = &qc->tf;
struct ata_device *dev = qc->dev;
u64 dev_sectors = qc->dev->n_sectors;
+ const u8 *cdb = scmd->cmnd;
u64 block;
u32 n_block;
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf->protocol = ATA_PROT_NODATA;
- if (scsicmd[0] == VERIFY)
- scsi_10_lba_len(scsicmd, &block, &n_block);
- else if (scsicmd[0] == VERIFY_16)
- scsi_16_lba_len(scsicmd, &block, &n_block);
- else
+ if (cdb[0] == VERIFY) {
+ if (scmd->cmd_len < 10)
+ goto invalid_fld;
+ scsi_10_lba_len(cdb, &block, &n_block);
+ } else if (cdb[0] == VERIFY_16) {
+ if (scmd->cmd_len < 16)
+ goto invalid_fld;
+ scsi_16_lba_len(cdb, &block, &n_block);
+ } else
goto invalid_fld;
if (!n_block)
return 0;
invalid_fld:
- ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
/* "Invalid field in cbd" */
return 1;
out_of_range:
- ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0);
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0);
/* "Logical Block Address out of range" */
return 1;
nothing_to_do:
- qc->scsicmd->result = SAM_STAT_GOOD;
+ scmd->result = SAM_STAT_GOOD;
return 1;
}
/**
* ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one
* @qc: Storage for translated ATA taskfile
- * @scsicmd: SCSI command to translate
*
* Converts any of six SCSI read/write commands into the
* ATA counterpart, including starting sector (LBA),
* RETURNS:
* Zero on success, non-zero on error.
*/
-
-static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
+static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc)
{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ const u8 *cdb = scmd->cmnd;
unsigned int tf_flags = 0;
u64 block;
u32 n_block;
int rc;
- if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 ||
- scsicmd[0] == WRITE_16)
+ if (cdb[0] == WRITE_10 || cdb[0] == WRITE_6 || cdb[0] == WRITE_16)
tf_flags |= ATA_TFLAG_WRITE;
/* Calculate the SCSI LBA, transfer length and FUA. */
- switch (scsicmd[0]) {
+ switch (cdb[0]) {
case READ_10:
case WRITE_10:
- scsi_10_lba_len(scsicmd, &block, &n_block);
- if (unlikely(scsicmd[1] & (1 << 3)))
+ if (unlikely(scmd->cmd_len < 10))
+ goto invalid_fld;
+ scsi_10_lba_len(cdb, &block, &n_block);
+ if (unlikely(cdb[1] & (1 << 3)))
tf_flags |= ATA_TFLAG_FUA;
break;
case READ_6:
case WRITE_6:
- scsi_6_lba_len(scsicmd, &block, &n_block);
+ if (unlikely(scmd->cmd_len < 6))
+ goto invalid_fld;
+ scsi_6_lba_len(cdb, &block, &n_block);
/* for 6-byte r/w commands, transfer length 0
* means 256 blocks of data, not 0 block.
break;
case READ_16:
case WRITE_16:
- scsi_16_lba_len(scsicmd, &block, &n_block);
- if (unlikely(scsicmd[1] & (1 << 3)))
+ if (unlikely(scmd->cmd_len < 16))
+ goto invalid_fld;
+ scsi_16_lba_len(cdb, &block, &n_block);
+ if (unlikely(cdb[1] & (1 << 3)))
tf_flags |= ATA_TFLAG_FUA;
break;
default:
goto out_of_range;
/* treat all other errors as -EINVAL, fall through */
invalid_fld:
- ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
/* "Invalid field in cbd" */
return 1;
out_of_range:
- ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0);
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0);
/* "Logical Block Address out of range" */
return 1;
nothing_to_do:
- qc->scsicmd->result = SAM_STAT_GOOD;
+ scmd->result = SAM_STAT_GOOD;
return 1;
}
ata_xlat_func_t xlat_func)
{
struct ata_queued_cmd *qc;
- u8 *scsicmd = cmd->cmnd;
int is_io = xlat_func == ata_scsi_rw_xlat;
VPRINTK("ENTER\n");
qc->complete_fn = ata_scsi_qc_complete;
- if (xlat_func(qc, scsicmd))
+ if (xlat_func(qc))
goto early_finish;
/* select device, send command to hardware */
/**
* atapi_xlat - Initialize PACKET taskfile
* @qc: command structure to be initialized
- * @scsicmd: SCSI CDB associated with this PACKET command
*
* LOCKING:
* spin_lock_irqsave(host lock)
* RETURNS:
* Zero on success, non-zero on failure.
*/
-
-static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
+static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
{
- struct scsi_cmnd *cmd = qc->scsicmd;
+ struct scsi_cmnd *scmd = qc->scsicmd;
struct ata_device *dev = qc->dev;
int using_pio = (dev->flags & ATA_DFLAG_PIO);
- int nodata = (cmd->sc_data_direction == DMA_NONE);
+ int nodata = (scmd->sc_data_direction == DMA_NONE);
if (!using_pio)
/* Check whether ATAPI DMA is safe */
if (ata_check_atapi_dma(qc))
using_pio = 1;
- memcpy(&qc->cdb, scsicmd, dev->cdb_len);
+ memset(qc->cdb, 0, dev->cdb_len);
+ memcpy(qc->cdb, scmd->cmnd, scmd->cmd_len);
qc->complete_fn = atapi_qc_complete;
qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
- if (cmd->sc_data_direction == DMA_TO_DEVICE) {
+ if (scmd->sc_data_direction == DMA_TO_DEVICE) {
qc->tf.flags |= ATA_TFLAG_WRITE;
DPRINTK("direction: write\n");
}
qc->tf.protocol = ATA_PROT_ATAPI_DMA;
qc->tf.feature |= ATAPI_PKT_DMA;
- if (atapi_dmadir && (cmd->sc_data_direction != DMA_TO_DEVICE))
+ if (atapi_dmadir && (scmd->sc_data_direction != DMA_TO_DEVICE))
/* some SATA bridges need us to indicate data xfer direction */
qc->tf.feature |= ATAPI_DMADIR;
}
- qc->nbytes = cmd->request_bufflen;
+ qc->nbytes = scmd->request_bufflen;
return 0;
}
/**
* ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile
* @qc: command structure to be initialized
- * @scsicmd: SCSI command to convert
*
* Handles either 12 or 16-byte versions of the CDB.
*
* RETURNS:
* Zero on success, non-zero on failure.
*/
-static unsigned int
-ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd)
+static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
{
struct ata_taskfile *tf = &(qc->tf);
- struct scsi_cmnd *cmd = qc->scsicmd;
+ struct scsi_cmnd *scmd = qc->scsicmd;
struct ata_device *dev = qc->dev;
+ const u8 *cdb = scmd->cmnd;
- if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN)
+ if ((tf->protocol = ata_scsi_map_proto(cdb[1])) == ATA_PROT_UNKNOWN)
goto invalid_fld;
/* We may not issue DMA commands if no DMA mode is set */
if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0)
goto invalid_fld;
- if (scsicmd[1] & 0xe0)
+ if (cdb[1] & 0xe0)
/* PIO multi not supported yet */
goto invalid_fld;
* 12 and 16 byte CDBs use different offsets to
* provide the various register values.
*/
- if (scsicmd[0] == ATA_16) {
+ if (cdb[0] == ATA_16) {
/*
* 16-byte CDB - may contain extended commands.
*
* If that is the case, copy the upper byte register values.
*/
- if (scsicmd[1] & 0x01) {
- tf->hob_feature = scsicmd[3];
- tf->hob_nsect = scsicmd[5];
- tf->hob_lbal = scsicmd[7];
- tf->hob_lbam = scsicmd[9];
- tf->hob_lbah = scsicmd[11];
+ if (cdb[1] & 0x01) {
+ tf->hob_feature = cdb[3];
+ tf->hob_nsect = cdb[5];
+ tf->hob_lbal = cdb[7];
+ tf->hob_lbam = cdb[9];
+ tf->hob_lbah = cdb[11];
tf->flags |= ATA_TFLAG_LBA48;
} else
tf->flags &= ~ATA_TFLAG_LBA48;
/*
* Always copy low byte, device and command registers.
*/
- tf->feature = scsicmd[4];
- tf->nsect = scsicmd[6];
- tf->lbal = scsicmd[8];
- tf->lbam = scsicmd[10];
- tf->lbah = scsicmd[12];
- tf->device = scsicmd[13];
- tf->command = scsicmd[14];
+ tf->feature = cdb[4];
+ tf->nsect = cdb[6];
+ tf->lbal = cdb[8];
+ tf->lbam = cdb[10];
+ tf->lbah = cdb[12];
+ tf->device = cdb[13];
+ tf->command = cdb[14];
} else {
/*
* 12-byte CDB - incapable of extended commands.
*/
tf->flags &= ~ATA_TFLAG_LBA48;
- tf->feature = scsicmd[3];
- tf->nsect = scsicmd[4];
- tf->lbal = scsicmd[5];
- tf->lbam = scsicmd[6];
- tf->lbah = scsicmd[7];
- tf->device = scsicmd[8];
- tf->command = scsicmd[9];
+ tf->feature = cdb[3];
+ tf->nsect = cdb[4];
+ tf->lbal = cdb[5];
+ tf->lbam = cdb[6];
+ tf->lbah = cdb[7];
+ tf->device = cdb[8];
+ tf->command = cdb[9];
}
/*
* If slave is possible, enforce correct master/slave bit
*/
tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE);
- if (cmd->sc_data_direction == DMA_TO_DEVICE)
+ if (scmd->sc_data_direction == DMA_TO_DEVICE)
tf->flags |= ATA_TFLAG_WRITE;
/*
* TODO: find out if we need to do more here to
* cover scatter/gather case.
*/
- qc->nsect = cmd->request_bufflen / ATA_SECT_SIZE;
+ qc->nsect = scmd->request_bufflen / ATA_SECT_SIZE;
/* request result TF */
qc->flags |= ATA_QCFLAG_RESULT_TF;
return 0;
invalid_fld:
- ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x00);
+ ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x00);
/* "Invalid field in cdb" */
return 1;
}
#endif
}
-static inline int __ata_scsi_queuecmd(struct scsi_cmnd *cmd,
+static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
void (*done)(struct scsi_cmnd *),
struct ata_device *dev)
{
int rc = 0;
+ if (unlikely(!scmd->cmd_len)) {
+ ata_dev_printk(dev, KERN_WARNING, "WARNING: zero len CDB\n");
+ scmd->result = DID_ERROR << 16;
+ done(scmd);
+ return 0;
+ }
+
if (dev->class == ATA_DEV_ATA) {
ata_xlat_func_t xlat_func = ata_get_xlat_func(dev,
- cmd->cmnd[0]);
+ scmd->cmnd[0]);
if (xlat_func)
- rc = ata_scsi_translate(dev, cmd, done, xlat_func);
+ rc = ata_scsi_translate(dev, scmd, done, xlat_func);
else
- ata_scsi_simulate(dev, cmd, done);
+ ata_scsi_simulate(dev, scmd, done);
} else
- rc = ata_scsi_translate(dev, cmd, done, atapi_xlat);
+ rc = ata_scsi_translate(dev, scmd, done, atapi_xlat);
return rc;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff