*/
enum {
ATA_EH_PRERESET_TIMEOUT = 10 * HZ,
+ ATA_EH_FASTDRAIN_INTERVAL = 3 * HZ,
};
/* The following table determines how we sequence resets. Each entry
#ifdef CONFIG_PM
static void ata_eh_handle_port_suspend(struct ata_port *ap);
static void ata_eh_handle_port_resume(struct ata_port *ap);
-static int ata_eh_suspend(struct ata_port *ap,
- struct ata_device **r_failed_dev);
-static void ata_eh_prep_resume(struct ata_port *ap);
-static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev);
#else /* CONFIG_PM */
static void ata_eh_handle_port_suspend(struct ata_port *ap)
{ }
static void ata_eh_handle_port_resume(struct ata_port *ap)
{ }
+#endif /* CONFIG_PM */
-static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev)
+static void __ata_ehi_pushv_desc(struct ata_eh_info *ehi, const char *fmt,
+ va_list args)
{
- return 0;
+ ehi->desc_len += vscnprintf(ehi->desc + ehi->desc_len,
+ ATA_EH_DESC_LEN - ehi->desc_len,
+ fmt, args);
}
-static void ata_eh_prep_resume(struct ata_port *ap)
-{ }
+/**
+ * __ata_ehi_push_desc - push error description without adding separator
+ * @ehi: target EHI
+ * @fmt: printf format string
+ *
+ * Format string according to @fmt and append it to @ehi->desc.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void __ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...)
+{
+ va_list args;
-static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev)
+ va_start(args, fmt);
+ __ata_ehi_pushv_desc(ehi, fmt, args);
+ va_end(args);
+}
+
+/**
+ * ata_ehi_push_desc - push error description with separator
+ * @ehi: target EHI
+ * @fmt: printf format string
+ *
+ * Format string according to @fmt and append it to @ehi->desc.
+ * If @ehi->desc is not empty, ", " is added in-between.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...)
{
- return 0;
+ va_list args;
+
+ if (ehi->desc_len)
+ __ata_ehi_push_desc(ehi, ", ");
+
+ va_start(args, fmt);
+ __ata_ehi_pushv_desc(ehi, fmt, args);
+ va_end(args);
+}
+
+/**
+ * ata_ehi_clear_desc - clean error description
+ * @ehi: target EHI
+ *
+ * Clear @ehi->desc.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_ehi_clear_desc(struct ata_eh_info *ehi)
+{
+ ehi->desc[0] = '\0';
+ ehi->desc_len = 0;
}
-#endif /* CONFIG_PM */
static void ata_ering_record(struct ata_ering *ering, int is_io,
unsigned int err_mask)
repeat:
/* invoke error handler */
if (ap->ops->error_handler) {
+ /* kill fast drain timer */
+ del_timer_sync(&ap->fastdrain_timer);
+
/* process port resume request */
ata_eh_handle_port_resume(ap);
}
ata_port_printk(ap, KERN_ERR, "EH pending after %d "
"tries, giving up\n", ATA_EH_MAX_REPEAT);
+ ap->pflags &= ~ATA_PFLAG_EH_PENDING;
}
/* this run is complete, make sure EH info is clear */
DPRINTK("EXIT\n");
}
+static int ata_eh_nr_in_flight(struct ata_port *ap)
+{
+ unsigned int tag;
+ int nr = 0;
+
+ /* count only non-internal commands */
+ for (tag = 0; tag < ATA_MAX_QUEUE - 1; tag++)
+ if (ata_qc_from_tag(ap, tag))
+ nr++;
+
+ return nr;
+}
+
+void ata_eh_fastdrain_timerfn(unsigned long arg)
+{
+ struct ata_port *ap = (void *)arg;
+ unsigned long flags;
+ int cnt;
+
+ spin_lock_irqsave(ap->lock, flags);
+
+ cnt = ata_eh_nr_in_flight(ap);
+
+ /* are we done? */
+ if (!cnt)
+ goto out_unlock;
+
+ if (cnt == ap->fastdrain_cnt) {
+ unsigned int tag;
+
+ /* No progress during the last interval, tag all
+ * in-flight qcs as timed out and freeze the port.
+ */
+ for (tag = 0; tag < ATA_MAX_QUEUE - 1; tag++) {
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag);
+ if (qc)
+ qc->err_mask |= AC_ERR_TIMEOUT;
+ }
+
+ ata_port_freeze(ap);
+ } else {
+ /* some qcs have finished, give it another chance */
+ ap->fastdrain_cnt = cnt;
+ ap->fastdrain_timer.expires =
+ jiffies + ATA_EH_FASTDRAIN_INTERVAL;
+ add_timer(&ap->fastdrain_timer);
+ }
+
+ out_unlock:
+ spin_unlock_irqrestore(ap->lock, flags);
+}
+
+/**
+ * ata_eh_set_pending - set ATA_PFLAG_EH_PENDING and activate fast drain
+ * @ap: target ATA port
+ * @fastdrain: activate fast drain
+ *
+ * Set ATA_PFLAG_EH_PENDING and activate fast drain if @fastdrain
+ * is non-zero and EH wasn't pending before. Fast drain ensures
+ * that EH kicks in in timely manner.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+static void ata_eh_set_pending(struct ata_port *ap, int fastdrain)
+{
+ int cnt;
+
+ /* already scheduled? */
+ if (ap->pflags & ATA_PFLAG_EH_PENDING)
+ return;
+
+ ap->pflags |= ATA_PFLAG_EH_PENDING;
+
+ if (!fastdrain)
+ return;
+
+ /* do we have in-flight qcs? */
+ cnt = ata_eh_nr_in_flight(ap);
+ if (!cnt)
+ return;
+
+ /* activate fast drain */
+ ap->fastdrain_cnt = cnt;
+ ap->fastdrain_timer.expires = jiffies + ATA_EH_FASTDRAIN_INTERVAL;
+ add_timer(&ap->fastdrain_timer);
+}
+
/**
* ata_qc_schedule_eh - schedule qc for error handling
* @qc: command to schedule error handling for
WARN_ON(!ap->ops->error_handler);
qc->flags |= ATA_QCFLAG_FAILED;
- qc->ap->pflags |= ATA_PFLAG_EH_PENDING;
+ ata_eh_set_pending(ap, 1);
/* The following will fail if timeout has already expired.
* ata_scsi_error() takes care of such scmds on EH entry.
{
WARN_ON(!ap->ops->error_handler);
- ap->pflags |= ATA_PFLAG_EH_PENDING;
+ if (ap->pflags & ATA_PFLAG_INITIALIZING)
+ return;
+
+ ata_eh_set_pending(ap, 1);
scsi_schedule_eh(ap->scsi_host);
DPRINTK("port EH scheduled\n");
WARN_ON(!ap->ops->error_handler);
+ /* we're gonna abort all commands, no need for fast drain */
+ ata_eh_set_pending(ap, 0);
+
for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag);
sense_buf[0] = 0x70;
sense_buf[2] = qc->result_tf.feature >> 4;
- /* some devices time out if garbage left in tf */
+ /* some devices time out if garbage left in tf */
ata_tf_init(dev, &tf);
memset(cdb, 0, ATAPI_CDB_LEN);
/* we've got the perpetrator, condemn it */
qc = __ata_qc_from_tag(ap, tag);
memcpy(&qc->result_tf, &tf, sizeof(tf));
- qc->err_mask |= AC_ERR_DEV;
+ qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ;
ehc->i.err_mask &= ~AC_ERR_DEV;
}
if (rc == 0) {
ehc->i.serror |= serror;
ata_eh_analyze_serror(ap);
- } else if (rc != -EOPNOTSUPP)
+ } else if (rc != -EOPNOTSUPP) {
+ /* SError read failed, force hardreset and probing */
+ ata_ehi_schedule_probe(&ehc->i);
ehc->i.action |= ATA_EH_HARDRESET;
+ ehc->i.err_mask |= AC_ERR_OTHER;
+ }
/* analyze NCQ failure */
ata_eh_analyze_ncq_error(ap);
ehc->i.err_mask, ap->sactive, ehc->i.serror,
ehc->i.action, frozen);
if (desc)
- ata_dev_printk(ehc->i.dev, KERN_ERR, "(%s)\n", desc);
+ ata_dev_printk(ehc->i.dev, KERN_ERR, "%s\n", desc);
} else {
ata_port_printk(ap, KERN_ERR, "exception Emask 0x%x "
"SAct 0x%x SErr 0x%x action 0x%x%s\n",
ehc->i.err_mask, ap->sactive, ehc->i.serror,
ehc->i.action, frozen);
if (desc)
- ata_port_printk(ap, KERN_ERR, "(%s)\n", desc);
+ ata_port_printk(ap, KERN_ERR, "%s\n", desc);
}
for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
"cmd %02x/%02x:%02x:%02x:%02x:%02x/%02x:%02x:%02x:%02x:%02x/%02x "
"tag %d cdb 0x%x data %u %s\n "
"res %02x/%02x:%02x:%02x:%02x:%02x/%02x:%02x:%02x:%02x:%02x/%02x "
- "Emask 0x%x (%s)\n",
+ "Emask 0x%x (%s)%s\n",
cmd->command, cmd->feature, cmd->nsect,
cmd->lbal, cmd->lbam, cmd->lbah,
cmd->hob_feature, cmd->hob_nsect,
res->lbal, res->lbam, res->lbah,
res->hob_feature, res->hob_nsect,
res->hob_lbal, res->hob_lbam, res->hob_lbah,
- res->device, qc->err_mask, ata_err_string(qc->err_mask));
+ res->device, qc->err_mask, ata_err_string(qc->err_mask),
+ qc->err_mask & AC_ERR_NCQ ? " <F>" : "");
}
}
unsigned long deadline;
unsigned int action;
ata_reset_fn_t reset;
- int i, did_followup_srst, rc;
+ int i, rc;
/* about to reset */
ata_eh_about_to_do(ap, NULL, ehc->i.action & ATA_EH_RESET_MASK);
} else
ata_port_printk(ap, KERN_ERR,
"prereset failed (errno=%d)\n", rc);
- return rc;
+ goto out;
}
}
/* prereset told us not to reset, bang classes and return */
for (i = 0; i < ATA_MAX_DEVICES; i++)
classes[i] = ATA_DEV_NONE;
- return 0;
+ rc = 0;
+ goto out;
}
/* did prereset() screw up? if so, fix up to avoid oopsing */
if (!reset) {
- ata_port_printk(ap, KERN_ERR, "BUG: prereset() requested "
- "invalid reset type\n");
if (softreset)
reset = softreset;
else
rc = ata_do_reset(ap, reset, classes, deadline);
- did_followup_srst = 0;
if (reset == hardreset &&
ata_eh_followup_srst_needed(rc, classify, classes)) {
/* okay, let's do follow-up softreset */
- did_followup_srst = 1;
reset = softreset;
if (!reset) {
ata_port_printk(ap, KERN_ERR,
"follow-up softreset required "
"but no softreset avaliable\n");
- return -EINVAL;
+ rc = -EINVAL;
+ goto out;
}
ata_eh_about_to_do(ap, NULL, ATA_EH_RESET_MASK);
classes[0] == ATA_DEV_UNKNOWN) {
ata_port_printk(ap, KERN_ERR,
"classification failed\n");
- return -EINVAL;
+ rc = -EINVAL;
+ goto out;
}
}
schedule_timeout_uninterruptible(delta);
}
- if (reset == hardreset &&
+ if (rc == -EPIPE ||
try == ARRAY_SIZE(ata_eh_reset_timeouts) - 1)
sata_down_spd_limit(ap);
if (hardreset)
}
if (rc == 0) {
+ u32 sstatus;
+
/* After the reset, the device state is PIO 0 and the
* controller state is undefined. Record the mode.
*/
for (i = 0; i < ATA_MAX_DEVICES; i++)
ap->device[i].pio_mode = XFER_PIO_0;
+ /* record current link speed */
+ if (sata_scr_read(ap, SCR_STATUS, &sstatus) == 0)
+ ap->sata_spd = (sstatus >> 4) & 0xf;
+
if (postreset)
postreset(ap, classes);
ata_eh_done(ap, NULL, ehc->i.action & ATA_EH_RESET_MASK);
ehc->i.action |= ATA_EH_REVALIDATE;
}
-
+ out:
+ /* clear hotplug flag */
+ ehc->i.flags &= ~ATA_EHI_HOTPLUGGED;
return rc;
}
if (ehc->i.flags & ATA_EHI_DID_RESET)
readid_flags |= ATA_READID_POSTRESET;
- if (action & ATA_EH_REVALIDATE && ata_dev_ready(dev)) {
+ if ((action & ATA_EH_REVALIDATE) && ata_dev_enabled(dev)) {
if (ata_port_offline(ap)) {
rc = -EIO;
goto err;
return rc;
}
-#ifdef CONFIG_PM
-/**
- * ata_eh_suspend - handle suspend EH action
- * @ap: target host port
- * @r_failed_dev: result parameter to indicate failing device
- *
- * Handle suspend EH action. Disk devices are spinned down and
- * other types of devices are just marked suspended. Once
- * suspended, no EH action to the device is allowed until it is
- * resumed.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * 0 on success, -errno otherwise
- */
-static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev)
-{
- struct ata_device *dev;
- int i, rc = 0;
-
- DPRINTK("ENTER\n");
-
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- unsigned long flags;
- unsigned int action, err_mask;
-
- dev = &ap->device[i];
- action = ata_eh_dev_action(dev);
-
- if (!ata_dev_enabled(dev) || !(action & ATA_EH_SUSPEND))
- continue;
-
- WARN_ON(dev->flags & ATA_DFLAG_SUSPENDED);
-
- ata_eh_about_to_do(ap, dev, ATA_EH_SUSPEND);
-
- if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) {
- /* flush cache */
- rc = ata_flush_cache(dev);
- if (rc)
- break;
-
- /* spin down */
- err_mask = ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1);
- if (err_mask) {
- ata_dev_printk(dev, KERN_ERR, "failed to "
- "spin down (err_mask=0x%x)\n",
- err_mask);
- rc = -EIO;
- break;
- }
- }
-
- spin_lock_irqsave(ap->lock, flags);
- dev->flags |= ATA_DFLAG_SUSPENDED;
- spin_unlock_irqrestore(ap->lock, flags);
-
- ata_eh_done(ap, dev, ATA_EH_SUSPEND);
- }
-
- if (rc)
- *r_failed_dev = dev;
-
- DPRINTK("EXIT\n");
- return rc;
-}
-
-/**
- * ata_eh_prep_resume - prep for resume EH action
- * @ap: target host port
- *
- * Clear SUSPENDED in preparation for scheduled resume actions.
- * This allows other parts of EH to access the devices being
- * resumed.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- */
-static void ata_eh_prep_resume(struct ata_port *ap)
-{
- struct ata_device *dev;
- unsigned long flags;
- int i;
-
- DPRINTK("ENTER\n");
-
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- unsigned int action;
-
- dev = &ap->device[i];
- action = ata_eh_dev_action(dev);
-
- if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME))
- continue;
-
- spin_lock_irqsave(ap->lock, flags);
- dev->flags &= ~ATA_DFLAG_SUSPENDED;
- spin_unlock_irqrestore(ap->lock, flags);
- }
-
- DPRINTK("EXIT\n");
-}
-
-/**
- * ata_eh_resume - handle resume EH action
- * @ap: target host port
- * @r_failed_dev: result parameter to indicate failing device
- *
- * Handle resume EH action. Target devices are already reset and
- * revalidated. Spinning up is the only operation left.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * 0 on success, -errno otherwise
- */
-static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev)
-{
- struct ata_device *dev;
- int i, rc = 0;
-
- DPRINTK("ENTER\n");
-
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- unsigned int action, err_mask;
-
- dev = &ap->device[i];
- action = ata_eh_dev_action(dev);
-
- if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME))
- continue;
-
- ata_eh_about_to_do(ap, dev, ATA_EH_RESUME);
-
- if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) {
- err_mask = ata_do_simple_cmd(dev,
- ATA_CMD_IDLEIMMEDIATE);
- if (err_mask) {
- ata_dev_printk(dev, KERN_ERR, "failed to "
- "spin up (err_mask=0x%x)\n",
- err_mask);
- rc = -EIO;
- break;
- }
- }
-
- ata_eh_done(ap, dev, ATA_EH_RESUME);
- }
-
- if (rc)
- *r_failed_dev = dev;
-
- DPRINTK("EXIT\n");
- return 0;
-}
-#endif /* CONFIG_PM */
-
static int ata_port_nr_enabled(struct ata_port *ap)
{
int i, cnt = 0;
struct ata_eh_context *ehc = &ap->eh_context;
int i;
- /* skip if all possible devices are suspended */
- for (i = 0; i < ata_port_max_devices(ap); i++) {
- struct ata_device *dev = &ap->device[i];
-
- if (!(dev->flags & ATA_DFLAG_SUSPENDED))
- break;
- }
-
- if (i == ata_port_max_devices(ap))
- return 1;
-
/* thaw frozen port, resume link and recover failed devices */
if ((ap->pflags & ATA_PFLAG_FROZEN) ||
(ehc->i.flags & ATA_EHI_RESUME_LINK) || ata_port_nr_enabled(ap))
return 1;
}
+static void ata_eh_handle_dev_fail(struct ata_device *dev, int err)
+{
+ struct ata_port *ap = dev->ap;
+ struct ata_eh_context *ehc = &ap->eh_context;
+
+ ehc->tries[dev->devno]--;
+
+ switch (err) {
+ case -ENODEV:
+ /* device missing or wrong IDENTIFY data, schedule probing */
+ ehc->i.probe_mask |= (1 << dev->devno);
+ case -EINVAL:
+ /* give it just one more chance */
+ ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
+ case -EIO:
+ if (ehc->tries[dev->devno] == 1) {
+ /* This is the last chance, better to slow
+ * down than lose it.
+ */
+ sata_down_spd_limit(ap);
+ ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
+ }
+ }
+
+ if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) {
+ /* disable device if it has used up all its chances */
+ ata_dev_disable(dev);
+
+ /* detach if offline */
+ if (ata_port_offline(ap))
+ ata_eh_detach_dev(dev);
+
+ /* probe if requested */
+ if ((ehc->i.probe_mask & (1 << dev->devno)) &&
+ !(ehc->did_probe_mask & (1 << dev->devno))) {
+ ata_eh_detach_dev(dev);
+ ata_dev_init(dev);
+
+ ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
+ ehc->did_probe_mask |= (1 << dev->devno);
+ ehc->i.action |= ATA_EH_SOFTRESET;
+ }
+ } else {
+ /* soft didn't work? be haaaaard */
+ if (ehc->i.flags & ATA_EHI_DID_RESET)
+ ehc->i.action |= ATA_EH_HARDRESET;
+ else
+ ehc->i.action |= ATA_EH_SOFTRESET;
+ }
+}
+
/**
* ata_eh_recover - recover host port after error
* @ap: host port to recover
if (ap->pflags & ATA_PFLAG_UNLOADING)
goto out;
- /* prep for resume */
- ata_eh_prep_resume(ap);
-
/* skip EH if possible. */
if (ata_eh_skip_recovery(ap))
ehc->i.action = 0;
if (rc)
goto dev_fail;
- /* resume devices */
- rc = ata_eh_resume(ap, &dev);
- if (rc)
- goto dev_fail;
-
/* configure transfer mode if necessary */
if (ehc->i.flags & ATA_EHI_SETMODE) {
rc = ata_set_mode(ap, &dev);
ehc->i.flags &= ~ATA_EHI_SETMODE;
}
- /* suspend devices */
- rc = ata_eh_suspend(ap, &dev);
- if (rc)
- goto dev_fail;
-
goto out;
dev_fail:
- ehc->tries[dev->devno]--;
-
- switch (rc) {
- case -EINVAL:
- /* eeek, something went very wrong, give up */
- ehc->tries[dev->devno] = 0;
- break;
-
- case -ENODEV:
- /* device missing or wrong IDENTIFY data, schedule probing */
- ehc->i.probe_mask |= (1 << dev->devno);
- /* give it just one more chance */
- ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
- case -EIO:
- if (ehc->tries[dev->devno] == 1) {
- /* This is the last chance, better to slow
- * down than lose it.
- */
- sata_down_spd_limit(ap);
- ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
- }
- }
-
- if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) {
- /* disable device if it has used up all its chances */
- ata_dev_disable(dev);
-
- /* detach if offline */
- if (ata_port_offline(ap))
- ata_eh_detach_dev(dev);
-
- /* probe if requested */
- if ((ehc->i.probe_mask & (1 << dev->devno)) &&
- !(ehc->did_probe_mask & (1 << dev->devno))) {
- ata_eh_detach_dev(dev);
- ata_dev_init(dev);
-
- ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
- ehc->did_probe_mask |= (1 << dev->devno);
- ehc->i.action |= ATA_EH_SOFTRESET;
- }
- } else {
- /* soft didn't work? be haaaaard */
- if (ehc->i.flags & ATA_EHI_DID_RESET)
- ehc->i.action |= ATA_EH_HARDRESET;
- else
- ehc->i.action |= ATA_EH_SOFTRESET;
- }
+ ata_eh_handle_dev_fail(dev, rc);
if (ata_port_nr_enabled(ap)) {
ata_port_printk(ap, KERN_WARNING, "failed to recover some "
WARN_ON(ap->pflags & ATA_PFLAG_SUSPENDED);
+ /* tell ACPI we're suspending */
+ rc = ata_acpi_on_suspend(ap);
+ if (rc)
+ goto out;
+
/* suspend */
ata_eh_freeze_port(ap);
if (ap->ops->port_suspend)
rc = ap->ops->port_suspend(ap, ap->pm_mesg);
+ out:
/* report result */
spin_lock_irqsave(ap->lock, flags);
ap->pflags &= ~ATA_PFLAG_PM_PENDING;
if (rc == 0)
ap->pflags |= ATA_PFLAG_SUSPENDED;
- else
+ else if (ap->pflags & ATA_PFLAG_FROZEN)
ata_port_schedule_eh(ap);
if (ap->pm_result) {
*
* Resume @ap.
*
- * This function also waits upto one second until all devices
- * hanging off this port requests resume EH action. This is to
- * prevent invoking EH and thus reset multiple times on resume.
- *
- * On DPM resume, where some of devices might not be resumed
- * together, this may delay port resume upto one second, but such
- * DPM resumes are rare and 1 sec delay isn't too bad.
- *
* LOCKING:
* Kernel thread context (may sleep).
*/
static void ata_eh_handle_port_resume(struct ata_port *ap)
{
- unsigned long timeout;
unsigned long flags;
- int i, rc = 0;
+ int rc = 0;
/* are we resuming? */
spin_lock_irqsave(ap->lock, flags);
}
spin_unlock_irqrestore(ap->lock, flags);
- /* spurious? */
- if (!(ap->pflags & ATA_PFLAG_SUSPENDED))
- goto done;
+ WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
if (ap->ops->port_resume)
rc = ap->ops->port_resume(ap);
- /* give devices time to request EH */
- timeout = jiffies + HZ; /* 1s max */
- while (1) {
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- struct ata_device *dev = &ap->device[i];
- unsigned int action = ata_eh_dev_action(dev);
-
- if ((dev->flags & ATA_DFLAG_SUSPENDED) &&
- !(action & ATA_EH_RESUME))
- break;
- }
-
- if (i == ATA_MAX_DEVICES || time_after(jiffies, timeout))
- break;
- msleep(10);
- }
+ /* tell ACPI that we're resuming */
+ ata_acpi_on_resume(ap);
- done:
+ /* report result */
spin_lock_irqsave(ap->lock, flags);
ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED);
if (ap->pm_result) {
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff