sh: Update cayman defconfig.
[safe/jmp/linux-2.6] / drivers / ata / libata-core.c
index ee72994..ce803d1 100644 (file)
@@ -950,8 +950,8 @@ unsigned int ata_dev_try_classify(struct ata_device *dev, int present,
        if (r_err)
                *r_err = err;
 
-       /* see if device passed diags: if master then continue and warn later */
-       if (err == 0 && dev->devno == 0)
+       /* see if device passed diags: continue and warn later */
+       if (err == 0)
                /* diagnostic fail : do nothing _YET_ */
                dev->horkage |= ATA_HORKAGE_DIAGNOSTIC;
        else if (err == 1)
@@ -1480,7 +1480,7 @@ unsigned long ata_id_xfermask(const u16 *id)
 }
 
 /**
- *     ata_port_queue_task - Queue port_task
+ *     ata_pio_queue_task - Queue port_task
  *     @ap: The ata_port to queue port_task for
  *     @fn: workqueue function to be scheduled
  *     @data: data for @fn to use
@@ -1492,16 +1492,15 @@ unsigned long ata_id_xfermask(const u16 *id)
  *     one task is active at any given time.
  *
  *     libata core layer takes care of synchronization between
- *     port_task and EH.  ata_port_queue_task() may be ignored for EH
+ *     port_task and EH.  ata_pio_queue_task() may be ignored for EH
  *     synchronization.
  *
  *     LOCKING:
  *     Inherited from caller.
  */
-void ata_port_queue_task(struct ata_port *ap, work_func_t fn, void *data,
-                        unsigned long delay)
+static void ata_pio_queue_task(struct ata_port *ap, void *data,
+                              unsigned long delay)
 {
-       PREPARE_DELAYED_WORK(&ap->port_task, fn);
        ap->port_task_data = data;
 
        /* may fail if ata_port_flush_task() in progress */
@@ -2262,19 +2261,8 @@ int ata_dev_configure(struct ata_device *dev)
                        dev->flags |= ATA_DFLAG_DIPM;
        }
 
-       if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) {
-               /* Let the user know. We don't want to disallow opens for
-                  rescue purposes, or in case the vendor is just a blithering
-                  idiot */
-               if (print_info) {
-                       ata_dev_printk(dev, KERN_WARNING,
-"Drive reports diagnostics failure. This may indicate a drive\n");
-                       ata_dev_printk(dev, KERN_WARNING,
-"fault or invalid emulation. Contact drive vendor for information.\n");
-               }
-       }
-
-       /* limit bridge transfers to udma5, 200 sectors */
+       /* Limit PATA drive on SATA cable bridge transfers to udma5,
+          200 sectors */
        if (ata_dev_knobble(dev)) {
                if (ata_msg_drv(ap) && print_info)
                        ata_dev_printk(dev, KERN_INFO,
@@ -2303,6 +2291,21 @@ int ata_dev_configure(struct ata_device *dev)
        if (ap->ops->dev_config)
                ap->ops->dev_config(dev);
 
+       if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) {
+               /* Let the user know. We don't want to disallow opens for
+                  rescue purposes, or in case the vendor is just a blithering
+                  idiot. Do this after the dev_config call as some controllers
+                  with buggy firmware may want to avoid reporting false device
+                  bugs */
+
+               if (print_info) {
+                       ata_dev_printk(dev, KERN_WARNING,
+"Drive reports diagnostics failure. This may indicate a drive\n");
+                       ata_dev_printk(dev, KERN_WARNING,
+"fault or invalid emulation. Contact drive vendor for information.\n");
+               }
+       }
+
        if (ata_msg_probe(ap))
                ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n",
                        __FUNCTION__, ata_chk_status(ap));
@@ -3066,7 +3069,7 @@ static int ata_dev_set_mode(struct ata_device *dev)
 
        /* Early MWDMA devices do DMA but don't allow DMA mode setting.
           Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */
-       if (dev->xfer_shift == ATA_SHIFT_MWDMA && 
+       if (dev->xfer_shift == ATA_SHIFT_MWDMA &&
            dev->dma_mode == XFER_MW_DMA_0 &&
            (dev->id[63] >> 8) & 1)
                err_mask &= ~AC_ERR_DEV;
@@ -4946,7 +4949,7 @@ unsigned int ata_data_xfer(struct ata_device *dev, unsigned char *buf,
 
        /* Transfer trailing 1 byte, if any. */
        if (unlikely(buflen & 0x01)) {
-               u16 align_buf[1] = { 0 };
+               __le16 align_buf[1] = { 0 };
                unsigned char *trailing_buf = buf + buflen - 1;
 
                if (rw == READ) {
@@ -5614,7 +5617,7 @@ fsm_start:
                msleep(2);
                status = ata_busy_wait(ap, ATA_BUSY, 10);
                if (status & ATA_BUSY) {
-                       ata_port_queue_task(ap, ata_pio_task, qc, ATA_SHORT_PAUSE);
+                       ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE);
                        return;
                }
        }
@@ -6037,7 +6040,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
                ap->hsm_task_state = HSM_ST_LAST;
 
                if (qc->tf.flags & ATA_TFLAG_POLLING)
-                       ata_port_queue_task(ap, ata_pio_task, qc, 0);
+                       ata_pio_queue_task(ap, qc, 0);
 
                break;
 
@@ -6059,7 +6062,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
                if (qc->tf.flags & ATA_TFLAG_WRITE) {
                        /* PIO data out protocol */
                        ap->hsm_task_state = HSM_ST_FIRST;
-                       ata_port_queue_task(ap, ata_pio_task, qc, 0);
+                       ata_pio_queue_task(ap, qc, 0);
 
                        /* always send first data block using
                         * the ata_pio_task() codepath.
@@ -6069,7 +6072,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
                        ap->hsm_task_state = HSM_ST;
 
                        if (qc->tf.flags & ATA_TFLAG_POLLING)
-                               ata_port_queue_task(ap, ata_pio_task, qc, 0);
+                               ata_pio_queue_task(ap, qc, 0);
 
                        /* if polling, ata_pio_task() handles the rest.
                         * otherwise, interrupt handler takes over from here.
@@ -6090,7 +6093,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
                /* send cdb by polling if no cdb interrupt */
                if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) ||
                    (qc->tf.flags & ATA_TFLAG_POLLING))
-                       ata_port_queue_task(ap, ata_pio_task, qc, 0);
+                       ata_pio_queue_task(ap, qc, 0);
                break;
 
        case ATAPI_PROT_DMA:
@@ -6102,7 +6105,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
 
                /* send cdb by polling if no cdb interrupt */
                if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
-                       ata_port_queue_task(ap, ata_pio_task, qc, 0);
+                       ata_pio_queue_task(ap, qc, 0);
                break;
 
        default:
@@ -6718,7 +6721,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host)
        ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN;
 #endif
 
-       INIT_DELAYED_WORK(&ap->port_task, NULL);
+       INIT_DELAYED_WORK(&ap->port_task, ata_pio_task);
        INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
        INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
        INIT_LIST_HEAD(&ap->eh_done_q);
@@ -7595,7 +7598,6 @@ EXPORT_SYMBOL_GPL(ata_wait_register);
 EXPORT_SYMBOL_GPL(ata_busy_sleep);
 EXPORT_SYMBOL_GPL(ata_wait_after_reset);
 EXPORT_SYMBOL_GPL(ata_wait_ready);
-EXPORT_SYMBOL_GPL(ata_port_queue_task);
 EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
 EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
 EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
@@ -7627,6 +7629,7 @@ EXPORT_SYMBOL_GPL(pci_test_config_bits);
 EXPORT_SYMBOL_GPL(ata_pci_init_sff_host);
 EXPORT_SYMBOL_GPL(ata_pci_init_bmdma);
 EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host);
+EXPORT_SYMBOL_GPL(ata_pci_activate_sff_host);
 EXPORT_SYMBOL_GPL(ata_pci_init_one);
 EXPORT_SYMBOL_GPL(ata_pci_remove_one);
 #ifdef CONFIG_PM