MODULE_VERSION(DRV_VERSION);
+/*
+ * Iterator helpers. Don't use directly.
+ *
+ * LOCKING:
+ * Host lock or EH context.
+ */
+struct ata_link *__ata_port_next_link(struct ata_port *ap,
+ struct ata_link *link, bool dev_only)
+{
+ /* NULL link indicates start of iteration */
+ if (!link) {
+ if (dev_only && sata_pmp_attached(ap))
+ return ap->pmp_link;
+ return &ap->link;
+ }
+
+ /* we just iterated over the host master link, what's next? */
+ if (link == &ap->link) {
+ if (!sata_pmp_attached(ap)) {
+ if (unlikely(ap->slave_link) && !dev_only)
+ return ap->slave_link;
+ return NULL;
+ }
+ return ap->pmp_link;
+ }
+
+ /* slave_link excludes PMP */
+ if (unlikely(link == ap->slave_link))
+ return NULL;
+
+ /* iterate to the next PMP link */
+ if (++link < ap->pmp_link + ap->nr_pmp_links)
+ return link;
+ return NULL;
+}
+
+/**
+ * ata_dev_phys_link - find physical link for a device
+ * @dev: ATA device to look up physical link for
+ *
+ * Look up physical link which @dev is attached to. Note that
+ * this is different from @dev->link only when @dev is on slave
+ * link. For all other cases, it's the same as @dev->link.
+ *
+ * LOCKING:
+ * Don't care.
+ *
+ * RETURNS:
+ * Pointer to the found physical link.
+ */
+struct ata_link *ata_dev_phys_link(struct ata_device *dev)
+{
+ struct ata_port *ap = dev->link->ap;
+
+ if (!ap->slave_link)
+ return dev->link;
+ if (!dev->devno)
+ return &ap->link;
+ return ap->slave_link;
+}
+
/**
* ata_force_cbl - force cable type according to libata.force
* @ap: ATA port of interest
* the host link and all fan-out ports connected via PMP. If the
* device part is specified as 0 (e.g. 1.00:), it specifies the
* first fan-out link not the host link. Device number 15 always
- * points to the host link whether PMP is attached or not.
+ * points to the host link whether PMP is attached or not. If the
+ * controller has slave link, device number 16 points to it.
*
* LOCKING:
* EH context.
static void ata_force_link_limits(struct ata_link *link)
{
bool did_spd = false;
- int linkno, i;
+ int linkno = link->pmp;
+ int i;
if (ata_is_host_link(link))
- linkno = 15;
- else
- linkno = link->pmp;
+ linkno += 15;
for (i = ata_force_tbl_size - 1; i >= 0; i--) {
const struct ata_force_ent *fe = &ata_force_tbl[i];
int alt_devno = devno;
int i;
- /* allow n.15 for the first device attached to host port */
- if (ata_is_host_link(dev->link) && devno == 0)
- alt_devno = 15;
+ /* allow n.15/16 for devices attached to host port */
+ if (ata_is_host_link(dev->link))
+ alt_devno += 15;
for (i = ata_force_tbl_size - 1; i >= 0; i--) {
const struct ata_force_ent *fe = &ata_force_tbl[i];
int alt_devno = devno;
int i;
- /* allow n.15 for the first device attached to host port */
- if (ata_is_host_link(dev->link) && devno == 0)
- alt_devno = 15;
+ /* allow n.15/16 for devices attached to host port */
+ if (ata_is_host_link(dev->link))
+ alt_devno += 15;
for (i = 0; i < ata_force_tbl_size; i++) {
const struct ata_force_ent *fe = &ata_force_tbl[i];
if (tf->flags & ATA_TFLAG_LBA48) {
block |= (u64)tf->hob_lbah << 40;
block |= (u64)tf->hob_lbam << 32;
- block |= tf->hob_lbal << 24;
+ block |= (u64)tf->hob_lbal << 24;
} else
block |= (tf->device & 0xf) << 24;
sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40;
sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32;
- sectors |= (tf->hob_lbal & 0xff) << 24;
+ sectors |= ((u64)(tf->hob_lbal & 0xff)) << 24;
sectors |= (tf->lbah & 0xff) << 16;
sectors |= (tf->lbam & 0xff) << 8;
sectors |= (tf->lbal & 0xff);
/**
* ata_pio_queue_task - Queue port_task
* @ap: The ata_port to queue port_task for
- * @fn: workqueue function to be scheduled
* @data: data for @fn to use
* @delay: delay time in msecs for workqueue function
*
static inline u8 ata_dev_knobble(struct ata_device *dev)
{
struct ata_port *ap = dev->link->ap;
+
+ if (ata_dev_blacklisted(dev) & ATA_HORKAGE_BRIDGE_OK)
+ return 0;
+
return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id)));
}
return;
sata_scr_read(link, SCR_CONTROL, &scontrol);
- if (ata_link_online(link)) {
+ if (ata_phys_link_online(link)) {
tmp = (sstatus >> 4) & 0xf;
ata_link_printk(link, KERN_INFO,
"SATA link up %s (SStatus %X SControl %X)\n",
dev->dma_mode = ata_xfer_mask2mode(dma_mask);
found = 1;
- if (dev->dma_mode != 0xff)
+ if (ata_dma_enabled(dev))
used_dma = 1;
}
if (!found)
/* step 3: set host DMA timings */
ata_link_for_each_dev(dev, link) {
- if (!ata_dev_enabled(dev) || dev->dma_mode == 0xff)
+ if (!ata_dev_enabled(dev) || !ata_dma_enabled(dev))
continue;
dev->xfer_mode = dev->dma_mode;
unsigned long nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT);
int warned = 0;
+ /* Slave readiness can't be tested separately from master. On
+ * M/S emulation configuration, this function should be called
+ * only on the master and it will handle both master and slave.
+ */
+ WARN_ON(link == link->ap->slave_link);
+
if (time_after(nodev_deadline, deadline))
nodev_deadline = deadline;
}
/* no point in trying softreset on offline link */
- if (ata_link_offline(link))
+ if (ata_phys_link_offline(link))
ehc->i.action &= ~ATA_EH_SOFTRESET;
return 0;
if (rc)
goto out;
/* if link is offline nothing more to do */
- if (ata_link_offline(link))
+ if (ata_phys_link_offline(link))
goto out;
/* Link is online. From this point, -ENODEV too is an error. */
/* Weird ATAPI devices */
{ "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 },
+ { "QUANTUM DAT DAT72-000", NULL, ATA_HORKAGE_ATAPI_MOD16_DMA },
/* Devices we expect to fail diagnostics */
{ "TSSTcorp CDDVDW SH-S202N", "SB00", ATA_HORKAGE_IVB, },
{ "TSSTcorp CDDVDW SH-S202N", "SB01", ATA_HORKAGE_IVB, },
+ /* Devices that do not need bridging limits applied */
+ { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, },
+
/* End Marker */
{ }
};
struct ata_link *link;
struct ata_device *dev;
- /* If the controller thinks we are 40 wire, we are */
+ /* If the controller thinks we are 40 wire, we are. */
if (ap->cbl == ATA_CBL_PATA40)
return 1;
- /* If the controller thinks we are 80 wire, we are */
+
+ /* If the controller thinks we are 80 wire, we are. */
if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA)
return 0;
- /* If the system is known to be 40 wire short cable (eg laptop),
- then we allow 80 wire modes even if the drive isn't sure */
+
+ /* If the system is known to be 40 wire short cable (eg
+ * laptop), then we allow 80 wire modes even if the drive
+ * isn't sure.
+ */
if (ap->cbl == ATA_CBL_PATA40_SHORT)
return 0;
- /* If the controller doesn't know we scan
-
- - Note: We look for all 40 wire detects at this point.
- Any 80 wire detect is taken to be 80 wire cable
- because
- - In many setups only the one drive (slave if present)
- will give a valid detect
- - If you have a non detect capable drive you don't
- want it to colour the choice
- */
+
+ /* If the controller doesn't know, we scan.
+ *
+ * Note: We look for all 40 wire detects at this point. Any
+ * 80 wire detect is taken to be 80 wire cable because
+ * - in many setups only the one drive (slave if present) will
+ * give a valid detect
+ * - if you have a non detect capable drive you don't want it
+ * to colour the choice
+ */
ata_port_for_each_link(link, ap) {
ata_link_for_each_dev(dev, link) {
- if (!ata_is_40wire(dev))
+ if (ata_dev_enabled(dev) && !ata_is_40wire(dev))
return 0;
}
}
/* Don't allow DMA if it isn't multiple of 16 bytes. Quite a
* few ATAPI devices choke on such DMA requests.
*/
- if (unlikely(qc->nbytes & 15))
+ if (!(qc->dev->horkage & ATA_HORKAGE_ATAPI_MOD16_DMA) &&
+ unlikely(qc->nbytes & 15))
return 1;
if (ap->ops->check_atapi_dma)
/**
* ata_qc_new_init - Request an available ATA command, and initialize it
* @dev: Device from whom we request an available command structure
+ * @tag: command tag
*
* LOCKING:
* None.
/**
* ata_qc_complete - Complete an active ATA command
* @qc: Command to complete
- * @err_mask: ATA Status register contents
*
* Indicate to the mid and upper layers that an ATA
* command has completed, with either an ok or not-ok status.
int sata_scr_read(struct ata_link *link, int reg, u32 *val)
{
if (ata_is_host_link(link)) {
- struct ata_port *ap = link->ap;
-
if (sata_scr_valid(link))
- return ap->ops->scr_read(ap, reg, val);
+ return link->ap->ops->scr_read(link, reg, val);
return -EOPNOTSUPP;
}
int sata_scr_write(struct ata_link *link, int reg, u32 val)
{
if (ata_is_host_link(link)) {
- struct ata_port *ap = link->ap;
-
if (sata_scr_valid(link))
- return ap->ops->scr_write(ap, reg, val);
+ return link->ap->ops->scr_write(link, reg, val);
return -EOPNOTSUPP;
}
int sata_scr_write_flush(struct ata_link *link, int reg, u32 val)
{
if (ata_is_host_link(link)) {
- struct ata_port *ap = link->ap;
int rc;
if (sata_scr_valid(link)) {
- rc = ap->ops->scr_write(ap, reg, val);
+ rc = link->ap->ops->scr_write(link, reg, val);
if (rc == 0)
- rc = ap->ops->scr_read(ap, reg, &val);
+ rc = link->ap->ops->scr_read(link, reg, &val);
return rc;
}
return -EOPNOTSUPP;
}
/**
- * ata_link_online - test whether the given link is online
+ * ata_phys_link_online - test whether the given link is online
* @link: ATA link to test
*
* Test whether @link is online. Note that this function returns
* None.
*
* RETURNS:
- * 1 if the port online status is available and online.
+ * True if the port online status is available and online.
*/
-int ata_link_online(struct ata_link *link)
+bool ata_phys_link_online(struct ata_link *link)
{
u32 sstatus;
if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
(sstatus & 0xf) == 0x3)
- return 1;
- return 0;
+ return true;
+ return false;
}
/**
- * ata_link_offline - test whether the given link is offline
+ * ata_phys_link_offline - test whether the given link is offline
* @link: ATA link to test
*
* Test whether @link is offline. Note that this function
* None.
*
* RETURNS:
- * 1 if the port offline status is available and offline.
+ * True if the port offline status is available and offline.
*/
-int ata_link_offline(struct ata_link *link)
+bool ata_phys_link_offline(struct ata_link *link)
{
u32 sstatus;
if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
(sstatus & 0xf) != 0x3)
- return 1;
- return 0;
+ return true;
+ return false;
+}
+
+/**
+ * ata_link_online - test whether the given link is online
+ * @link: ATA link to test
+ *
+ * Test whether @link is online. This is identical to
+ * ata_phys_link_online() when there's no slave link. When
+ * there's a slave link, this function should only be called on
+ * the master link and will return true if any of M/S links is
+ * online.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * True if the port online status is available and online.
+ */
+bool ata_link_online(struct ata_link *link)
+{
+ struct ata_link *slave = link->ap->slave_link;
+
+ WARN_ON(link == slave); /* shouldn't be called on slave link */
+
+ return ata_phys_link_online(link) ||
+ (slave && ata_phys_link_online(slave));
+}
+
+/**
+ * ata_link_offline - test whether the given link is offline
+ * @link: ATA link to test
+ *
+ * Test whether @link is offline. This is identical to
+ * ata_phys_link_offline() when there's no slave link. When
+ * there's a slave link, this function should only be called on
+ * the master link and will return true if both M/S links are
+ * offline.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * True if the port offline status is available and offline.
+ */
+bool ata_link_offline(struct ata_link *link)
+{
+ struct ata_link *slave = link->ap->slave_link;
+
+ WARN_ON(link == slave); /* shouldn't be called on slave link */
+
+ return ata_phys_link_offline(link) &&
+ (!slave || ata_phys_link_offline(slave));
}
#ifdef CONFIG_PM
*/
void ata_dev_init(struct ata_device *dev)
{
- struct ata_link *link = dev->link;
+ struct ata_link *link = ata_dev_phys_link(dev);
struct ata_port *ap = link->ap;
unsigned long flags;
- /* SATA spd limit is bound to the first device */
+ /* SATA spd limit is bound to the attached device, reset together */
link->sata_spd_limit = link->hw_sata_spd_limit;
link->sata_spd = 0;
*/
int sata_link_init_spd(struct ata_link *link)
{
- u32 scontrol;
u8 spd;
int rc;
- rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
+ rc = sata_scr_read(link, SCR_CONTROL, &link->saved_scontrol);
if (rc)
return rc;
- spd = (scontrol >> 4) & 0xf;
+ spd = (link->saved_scontrol >> 4) & 0xf;
if (spd)
link->hw_sata_spd_limit &= (1 << spd) - 1;
#ifdef CONFIG_ATA_SFF
INIT_DELAYED_WORK(&ap->port_task, ata_pio_task);
+#else
+ INIT_DELAYED_WORK(&ap->port_task, NULL);
#endif
INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
INIT_LIST_HEAD(&ap->eh_done_q);
init_waitqueue_head(&ap->eh_wait_q);
+ init_completion(&ap->park_req_pending);
init_timer_deferrable(&ap->fastdrain_timer);
ap->fastdrain_timer.function = ata_eh_fastdrain_timerfn;
ap->fastdrain_timer.data = (unsigned long)ap;
scsi_host_put(ap->scsi_host);
kfree(ap->pmp_link);
+ kfree(ap->slave_link);
kfree(ap);
host->ports[i] = NULL;
}
return host;
}
+/**
+ * ata_slave_link_init - initialize slave link
+ * @ap: port to initialize slave link for
+ *
+ * Create and initialize slave link for @ap. This enables slave
+ * link handling on the port.
+ *
+ * In libata, a port contains links and a link contains devices.
+ * There is single host link but if a PMP is attached to it,
+ * there can be multiple fan-out links. On SATA, there's usually
+ * a single device connected to a link but PATA and SATA
+ * controllers emulating TF based interface can have two - master
+ * and slave.
+ *
+ * However, there are a few controllers which don't fit into this
+ * abstraction too well - SATA controllers which emulate TF
+ * interface with both master and slave devices but also have
+ * separate SCR register sets for each device. These controllers
+ * need separate links for physical link handling
+ * (e.g. onlineness, link speed) but should be treated like a
+ * traditional M/S controller for everything else (e.g. command
+ * issue, softreset).
+ *
+ * slave_link is libata's way of handling this class of
+ * controllers without impacting core layer too much. For
+ * anything other than physical link handling, the default host
+ * link is used for both master and slave. For physical link
+ * handling, separate @ap->slave_link is used. All dirty details
+ * are implemented inside libata core layer. From LLD's POV, the
+ * only difference is that prereset, hardreset and postreset are
+ * called once more for the slave link, so the reset sequence
+ * looks like the following.
+ *
+ * prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) ->
+ * softreset(M) -> postreset(M) -> postreset(S)
+ *
+ * Note that softreset is called only for the master. Softreset
+ * resets both M/S by definition, so SRST on master should handle
+ * both (the standard method will work just fine).
+ *
+ * LOCKING:
+ * Should be called before host is registered.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+int ata_slave_link_init(struct ata_port *ap)
+{
+ struct ata_link *link;
+
+ WARN_ON(ap->slave_link);
+ WARN_ON(ap->flags & ATA_FLAG_PMP);
+
+ link = kzalloc(sizeof(*link), GFP_KERNEL);
+ if (!link)
+ return -ENOMEM;
+
+ ata_link_init(ap, link, 1);
+ ap->slave_link = link;
+ return 0;
+}
+
static void ata_host_stop(struct device *gendev, void *res)
{
struct ata_host *host = dev_get_drvdata(gendev);
/* init sata_spd_limit to the current value */
sata_link_init_spd(&ap->link);
+ if (ap->slave_link)
+ sata_link_init_spd(ap->slave_link);
/* print per-port info to dmesg */
xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask,
ata_port_wait_eh(ap);
/* EH is now guaranteed to see UNLOADING - EH context belongs
- * to us. Disable all existing devices.
+ * to us. Restore SControl and disable all existing devices.
*/
- ata_port_for_each_link(link, ap) {
+ __ata_port_for_each_link(link, ap) {
+ sata_scr_write(link, SCR_CONTROL, link->saved_scontrol & 0xff0);
ata_link_for_each_dev(dev, link)
ata_dev_disable(dev);
}
EXPORT_SYMBOL_GPL(sata_port_ops);
EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
EXPORT_SYMBOL_GPL(ata_dummy_port_info);
+EXPORT_SYMBOL_GPL(__ata_port_next_link);
EXPORT_SYMBOL_GPL(ata_std_bios_param);
EXPORT_SYMBOL_GPL(ata_host_init);
EXPORT_SYMBOL_GPL(ata_host_alloc);
EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
+EXPORT_SYMBOL_GPL(ata_slave_link_init);
EXPORT_SYMBOL_GPL(ata_host_start);
EXPORT_SYMBOL_GPL(ata_host_register);
EXPORT_SYMBOL_GPL(ata_host_activate);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff