#include <linux/completion.h>
#include <linux/suspend.h>
#include <linux/workqueue.h>
-#include <linux/jiffies.h>
#include <linux/scatterlist.h>
#include <linux/io.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
-#include <asm/semaphore.h>
#include <asm/byteorder.h>
#include <linux/cdrom.h>
.hardreset = sata_std_hardreset,
};
-const struct ata_port_operations sata_pmp_port_ops = {
- .inherits = &sata_port_ops,
-
- .pmp_prereset = ata_std_prereset,
- .pmp_hardreset = sata_std_hardreset,
- .pmp_postreset = ata_std_postreset,
- .error_handler = sata_pmp_error_handler,
-};
-
static unsigned int ata_dev_init_params(struct ata_device *dev,
u16 heads, u16 sectors);
static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
unsigned long xfer_mask;
unsigned int horkage_on;
unsigned int horkage_off;
+ unsigned int lflags;
};
struct ata_force_ent {
module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0);
MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/kernel-parameters.txt for details)");
-int atapi_enabled = 1;
+static int atapi_enabled = 1;
module_param(atapi_enabled, int, 0444);
MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
module_param_named(dma, libata_dma_mask, int, 0444);
MODULE_PARM_DESC(dma, "DMA enable/disable (0x1==ATA, 0x2==ATAPI, 0x4==CF)");
-static int ata_probe_timeout = ATA_TMOUT_INTERNAL / HZ;
+static int ata_probe_timeout;
module_param(ata_probe_timeout, int, 0444);
MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");
MODULE_VERSION(DRV_VERSION);
+/*
+ * Iterator helpers. Don't use directly.
+ *
+ * LOCKING:
+ * Host lock or EH context.
+ */
+struct ata_link *__ata_port_next_link(struct ata_port *ap,
+ struct ata_link *link, bool dev_only)
+{
+ /* NULL link indicates start of iteration */
+ if (!link) {
+ if (dev_only && sata_pmp_attached(ap))
+ return ap->pmp_link;
+ return &ap->link;
+ }
+
+ /* we just iterated over the host master link, what's next? */
+ if (link == &ap->link) {
+ if (!sata_pmp_attached(ap)) {
+ if (unlikely(ap->slave_link) && !dev_only)
+ return ap->slave_link;
+ return NULL;
+ }
+ return ap->pmp_link;
+ }
+
+ /* slave_link excludes PMP */
+ if (unlikely(link == ap->slave_link))
+ return NULL;
+
+ /* iterate to the next PMP link */
+ if (++link < ap->pmp_link + ap->nr_pmp_links)
+ return link;
+ return NULL;
+}
+
+/**
+ * ata_dev_phys_link - find physical link for a device
+ * @dev: ATA device to look up physical link for
+ *
+ * Look up physical link which @dev is attached to. Note that
+ * this is different from @dev->link only when @dev is on slave
+ * link. For all other cases, it's the same as @dev->link.
+ *
+ * LOCKING:
+ * Don't care.
+ *
+ * RETURNS:
+ * Pointer to the found physical link.
+ */
+struct ata_link *ata_dev_phys_link(struct ata_device *dev)
+{
+ struct ata_port *ap = dev->link->ap;
+
+ if (!ap->slave_link)
+ return dev->link;
+ if (!dev->devno)
+ return &ap->link;
+ return ap->slave_link;
+}
+
/**
* ata_force_cbl - force cable type according to libata.force
* @ap: ATA port of interest
}
/**
- * ata_force_spd_limit - force SATA spd limit according to libata.force
+ * ata_force_link_limits - force link limits according to libata.force
* @link: ATA link of interest
*
- * Force SATA spd limit according to libata.force and whine about
- * it. When only the port part is specified (e.g. 1:), the limit
- * applies to all links connected to both the host link and all
- * fan-out ports connected via PMP. If the device part is
- * specified as 0 (e.g. 1.00:), it specifies the first fan-out
- * link not the host link. Device number 15 always points to the
- * host link whether PMP is attached or not.
+ * Force link flags and SATA spd limit according to libata.force
+ * and whine about it. When only the port part is specified
+ * (e.g. 1:), the limit applies to all links connected to both
+ * the host link and all fan-out ports connected via PMP. If the
+ * device part is specified as 0 (e.g. 1.00:), it specifies the
+ * first fan-out link not the host link. Device number 15 always
+ * points to the host link whether PMP is attached or not. If the
+ * controller has slave link, device number 16 points to it.
*
* LOCKING:
* EH context.
*/
-static void ata_force_spd_limit(struct ata_link *link)
+static void ata_force_link_limits(struct ata_link *link)
{
- int linkno, i;
+ bool did_spd = false;
+ int linkno = link->pmp;
+ int i;
if (ata_is_host_link(link))
- linkno = 15;
- else
- linkno = link->pmp;
+ linkno += 15;
for (i = ata_force_tbl_size - 1; i >= 0; i--) {
const struct ata_force_ent *fe = &ata_force_tbl[i];
if (fe->device != -1 && fe->device != linkno)
continue;
- if (!fe->param.spd_limit)
- continue;
+ /* only honor the first spd limit */
+ if (!did_spd && fe->param.spd_limit) {
+ link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
+ ata_link_printk(link, KERN_NOTICE,
+ "FORCE: PHY spd limit set to %s\n",
+ fe->param.name);
+ did_spd = true;
+ }
- link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
- ata_link_printk(link, KERN_NOTICE,
- "FORCE: PHY spd limit set to %s\n", fe->param.name);
- return;
+ /* let lflags stack */
+ if (fe->param.lflags) {
+ link->flags |= fe->param.lflags;
+ ata_link_printk(link, KERN_NOTICE,
+ "FORCE: link flag 0x%x forced -> 0x%x\n",
+ fe->param.lflags, link->flags);
+ }
}
}
int alt_devno = devno;
int i;
- /* allow n.15 for the first device attached to host port */
- if (ata_is_host_link(dev->link) && devno == 0)
- alt_devno = 15;
+ /* allow n.15/16 for devices attached to host port */
+ if (ata_is_host_link(dev->link))
+ alt_devno += 15;
for (i = ata_force_tbl_size - 1; i >= 0; i--) {
const struct ata_force_ent *fe = &ata_force_tbl[i];
int alt_devno = devno;
int i;
- /* allow n.15 for the first device attached to host port */
- if (ata_is_host_link(dev->link) && devno == 0)
- alt_devno = 15;
+ /* allow n.15/16 for devices attached to host port */
+ if (ata_is_host_link(dev->link))
+ alt_devno += 15;
for (i = 0; i < ata_force_tbl_size; i++) {
const struct ata_force_ent *fe = &ata_force_tbl[i];
if (tf->flags & ATA_TFLAG_LBA48) {
block |= (u64)tf->hob_lbah << 40;
block |= (u64)tf->hob_lbam << 32;
- block |= tf->hob_lbal << 24;
+ block |= (u64)tf->hob_lbal << 24;
} else
block |= (tf->device & 0xf) << 24;
{
unsigned int c;
+ BUG_ON(len & 1);
+
while (len > 0) {
c = id[ofs] >> 8;
*s = c;
{
unsigned char *p;
- WARN_ON(!(len & 1));
-
ata_id_string(id, s, ofs, len - 1);
p = s + strnlen(s, len - 1);
sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40;
sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32;
- sectors |= (tf->hob_lbal & 0xff) << 24;
+ sectors |= ((u64)(tf->hob_lbal & 0xff)) << 24;
sectors |= (tf->lbah & 0xff) << 16;
sectors |= (tf->lbam & 0xff) << 8;
sectors |= (tf->lbal & 0xff);
/**
* ata_pio_queue_task - Queue port_task
* @ap: The ata_port to queue port_task for
- * @fn: workqueue function to be scheduled
* @data: data for @fn to use
- * @delay: delay time for workqueue function
+ * @delay: delay time in msecs for workqueue function
*
* Schedule @fn(@data) for execution after @delay jiffies using
* port_task. There is one port_task per port and it's the
ap->port_task_data = data;
/* may fail if ata_port_flush_task() in progress */
- queue_delayed_work(ata_wq, &ap->port_task, delay);
+ queue_delayed_work(ata_wq, &ap->port_task, msecs_to_jiffies(delay));
}
/**
struct ata_link *link = dev->link;
struct ata_port *ap = link->ap;
u8 command = tf->command;
+ int auto_timeout = 0;
struct ata_queued_cmd *qc;
unsigned int tag, preempted_tag;
u32 preempted_sactive, preempted_qc_active;
spin_unlock_irqrestore(ap->lock, flags);
- if (!timeout)
- timeout = ata_probe_timeout * 1000 / HZ;
+ if (!timeout) {
+ if (ata_probe_timeout)
+ timeout = ata_probe_timeout * 1000;
+ else {
+ timeout = ata_internal_cmd_timeout(dev, command);
+ auto_timeout = 1;
+ }
+ }
rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout));
spin_unlock_irqrestore(ap->lock, flags);
+ if ((err_mask & AC_ERR_TIMEOUT) && auto_timeout)
+ ata_internal_cmd_timed_out(dev, command);
+
return err_mask;
}
}
/**
+ * ata_do_dev_read_id - default ID read method
+ * @dev: device
+ * @tf: proposed taskfile
+ * @id: data buffer
+ *
+ * Issue the identify taskfile and hand back the buffer containing
+ * identify data. For some RAID controllers and for pre ATA devices
+ * this function is wrapped or replaced by the driver
+ */
+unsigned int ata_do_dev_read_id(struct ata_device *dev,
+ struct ata_taskfile *tf, u16 *id)
+{
+ return ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE,
+ id, sizeof(id[0]) * ATA_ID_WORDS, 0);
+}
+
+/**
* ata_dev_read_id - Read ID data from the specified device
* @dev: target device
* @p_class: pointer to class of the target device (may be changed)
if (ata_msg_ctl(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
- retry:
+retry:
ata_tf_init(dev, &tf);
switch (class) {
*/
tf.flags |= ATA_TFLAG_POLLING;
- err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
- id, sizeof(id[0]) * ATA_ID_WORDS, 0);
+ if (ap->ops->read_id)
+ err_mask = ap->ops->read_id(dev, &tf, id);
+ else
+ err_mask = ata_do_dev_read_id(dev, &tf, id);
+
if (err_mask) {
if (err_mask & AC_ERR_NODEV_HINT) {
ata_dev_printk(dev, KERN_DEBUG,
static inline u8 ata_dev_knobble(struct ata_device *dev)
{
struct ata_port *ap = dev->link->ap;
+
+ if (ata_dev_blacklisted(dev) & ATA_HORKAGE_BRIDGE_OK)
+ return 0;
+
return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id)));
}
dev->horkage |= ata_dev_blacklisted(dev);
ata_force_horkage(dev);
+ if (dev->horkage & ATA_HORKAGE_DISABLE) {
+ ata_dev_printk(dev, KERN_INFO,
+ "unsupported device, disabling\n");
+ ata_dev_disable(dev);
+ return 0;
+ }
+
+ if ((!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) &&
+ dev->class == ATA_DEV_ATAPI) {
+ ata_dev_printk(dev, KERN_WARNING,
+ "WARNING: ATAPI is %s, device ignored.\n",
+ atapi_enabled ? "not supported with this driver"
+ : "disabled");
+ ata_dev_disable(dev);
+ return 0;
+ }
+
/* let ACPI work its magic */
rc = ata_acpi_on_devcfg(dev);
if (rc)
* changed notifications and ATAPI ANs.
*/
if ((ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) &&
- (!ap->nr_pmp_links ||
+ (!sata_pmp_attached(ap) ||
sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) {
unsigned int err_mask;
* LOCKING:
* None.
*/
-void sata_print_link_status(struct ata_link *link)
+static void sata_print_link_status(struct ata_link *link)
{
u32 sstatus, scontrol, tmp;
return;
sata_scr_read(link, SCR_CONTROL, &scontrol);
- if (ata_link_online(link)) {
+ if (ata_phys_link_online(link)) {
tmp = (sstatus >> 4) & 0xf;
ata_link_printk(link, KERN_INFO,
"SATA link up %s (SStatus %X SControl %X)\n",
* RETURNS:
* 1 if SATA spd configuration is needed, 0 otherwise.
*/
-int sata_set_spd_needed(struct ata_link *link)
+static int sata_set_spd_needed(struct ata_link *link)
{
u32 scontrol;
if (rc)
return rc;
- /* Old CFA may refuse this command, which is just fine */
- if (dev->xfer_shift == ATA_SHIFT_PIO && ata_id_is_cfa(dev->id))
- ign_dev_err = 1;
-
- /* Some very old devices and some bad newer ones fail any kind of
- SET_XFERMODE request but support PIO0-2 timings and no IORDY */
- if (dev->xfer_shift == ATA_SHIFT_PIO && !ata_id_has_iordy(dev->id) &&
- dev->pio_mode <= XFER_PIO_2)
- ign_dev_err = 1;
-
+ if (dev->xfer_shift == ATA_SHIFT_PIO) {
+ /* Old CFA may refuse this command, which is just fine */
+ if (ata_id_is_cfa(dev->id))
+ ign_dev_err = 1;
+ /* Catch several broken garbage emulations plus some pre
+ ATA devices */
+ if (ata_id_major_version(dev->id) == 0 &&
+ dev->pio_mode <= XFER_PIO_2)
+ ign_dev_err = 1;
+ /* Some very old devices and some bad newer ones fail
+ any kind of SET_XFERMODE request but support PIO0-2
+ timings and no IORDY */
+ if (!ata_id_has_iordy(dev->id) && dev->pio_mode <= XFER_PIO_2)
+ ign_dev_err = 1;
+ }
/* Early MWDMA devices do DMA but don't allow DMA mode setting.
Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */
if (dev->xfer_shift == ATA_SHIFT_MWDMA &&
dev->dma_mode = ata_xfer_mask2mode(dma_mask);
found = 1;
- if (dev->dma_mode != 0xff)
+ if (ata_dma_enabled(dev))
used_dma = 1;
}
if (!found)
/* step 3: set host DMA timings */
ata_link_for_each_dev(dev, link) {
- if (!ata_dev_enabled(dev) || dev->dma_mode == 0xff)
+ if (!ata_dev_enabled(dev) || !ata_dma_enabled(dev))
continue;
dev->xfer_mode = dev->dma_mode;
int (*check_ready)(struct ata_link *link))
{
unsigned long start = jiffies;
- unsigned long nodev_deadline = start + ATA_TMOUT_FF_WAIT;
+ unsigned long nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT);
int warned = 0;
+ /* Slave readiness can't be tested separately from master. On
+ * M/S emulation configuration, this function should be called
+ * only on the master and it will handle both master and slave.
+ */
+ WARN_ON(link == link->ap->slave_link);
+
if (time_after(nodev_deadline, deadline))
nodev_deadline = deadline;
* RETURNS:
* 0 if @linke is ready before @deadline; otherwise, -errno.
*/
-extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
+int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
int (*check_ready)(struct ata_link *link))
{
- msleep(ATA_WAIT_AFTER_RESET_MSECS);
+ msleep(ATA_WAIT_AFTER_RESET);
return ata_wait_ready(link, deadline, check_ready);
}
int sata_link_debounce(struct ata_link *link, const unsigned long *params,
unsigned long deadline)
{
- unsigned long interval_msec = params[0];
- unsigned long duration = msecs_to_jiffies(params[1]);
+ unsigned long interval = params[0];
+ unsigned long duration = params[1];
unsigned long last_jiffies, t;
u32 last, cur;
int rc;
- t = jiffies + msecs_to_jiffies(params[2]);
+ t = ata_deadline(jiffies, params[2]);
if (time_before(t, deadline))
deadline = t;
last_jiffies = jiffies;
while (1) {
- msleep(interval_msec);
+ msleep(interval);
if ((rc = sata_scr_read(link, SCR_STATUS, &cur)))
return rc;
cur &= 0xf;
if (cur == last) {
if (cur == 1 && time_before(jiffies, deadline))
continue;
- if (time_after(jiffies, last_jiffies + duration))
+ if (time_after(jiffies,
+ ata_deadline(last_jiffies, duration)))
return 0;
continue;
}
if ((rc = sata_link_debounce(link, params, deadline)))
return rc;
- /* Clear SError. PMP and some host PHYs require this to
- * operate and clearing should be done before checking PHY
- * online status to avoid race condition (hotplugging between
- * link resume and status check).
- */
+ /* clear SError, some PHYs require this even for SRST to work */
if (!(rc = sata_scr_read(link, SCR_ERROR, &serror)))
rc = sata_scr_write(link, SCR_ERROR, serror);
- if (rc == 0 || rc == -EINVAL) {
- unsigned long flags;
- spin_lock_irqsave(link->ap->lock, flags);
- link->eh_info.serror = 0;
- spin_unlock_irqrestore(link->ap->lock, flags);
- rc = 0;
- }
- return rc;
+ return rc != -EINVAL ? rc : 0;
}
/**
"link for reset (errno=%d)\n", rc);
}
+ /* no point in trying softreset on offline link */
+ if (ata_phys_link_offline(link))
+ ehc->i.action &= ~ATA_EH_SOFTRESET;
+
return 0;
}
if (rc)
goto out;
/* if link is offline nothing more to do */
- if (ata_link_offline(link))
+ if (ata_phys_link_offline(link))
goto out;
/* Link is online. From this point, -ENODEV too is an error. */
if (online)
*online = true;
- if ((link->ap->flags & ATA_FLAG_PMP) && ata_is_host_link(link)) {
+ if (sata_pmp_supported(link->ap) && ata_is_host_link(link)) {
/* If PMP is supported, we have to do follow-up SRST.
* Some PMPs don't send D2H Reg FIS after hardreset if
* the first port is empty. Wait only for
if (check_ready) {
unsigned long pmp_deadline;
- pmp_deadline = jiffies + ATA_TMOUT_PMP_SRST_WAIT;
+ pmp_deadline = ata_deadline(jiffies,
+ ATA_TMOUT_PMP_SRST_WAIT);
if (time_after(pmp_deadline, deadline))
pmp_deadline = deadline;
ata_wait_ready(link, pmp_deadline, check_ready);
if (check_ready)
rc = ata_wait_ready(link, deadline, check_ready);
out:
- if (rc && rc != -EAGAIN)
+ if (rc && rc != -EAGAIN) {
+ /* online is set iff link is online && reset succeeded */
+ if (online)
+ *online = false;
ata_link_printk(link, KERN_ERR,
"COMRESET failed (errno=%d)\n", rc);
+ }
DPRINTK("EXIT, rc=%d\n", rc);
return rc;
}
*/
void ata_std_postreset(struct ata_link *link, unsigned int *classes)
{
+ u32 serror;
+
DPRINTK("ENTER\n");
+ /* reset complete, clear SError */
+ if (!sata_scr_read(link, SCR_ERROR, &serror))
+ sata_scr_write(link, SCR_ERROR, serror);
+
/* print link status */
sata_print_link_status(link);
{ "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA },
{ "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA },
/* Odd clown on sil3726/4726 PMPs */
- { "Config Disk", NULL, ATA_HORKAGE_NODMA |
- ATA_HORKAGE_SKIP_PM },
+ { "Config Disk", NULL, ATA_HORKAGE_DISABLE },
/* Weird ATAPI devices */
{ "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 },
+ { "QUANTUM DAT DAT72-000", NULL, ATA_HORKAGE_ATAPI_MOD16_DMA },
/* Devices we expect to fail diagnostics */
/* Devices which get the IVB wrong */
{ "QUANTUM FIREBALLlct10 05", "A03.0900", ATA_HORKAGE_IVB, },
+ /* Maybe we should just blacklist TSSTcorp... */
+ { "TSSTcorp CDDVDW SH-S202H", "SB00", ATA_HORKAGE_IVB, },
+ { "TSSTcorp CDDVDW SH-S202H", "SB01", ATA_HORKAGE_IVB, },
{ "TSSTcorp CDDVDW SH-S202J", "SB00", ATA_HORKAGE_IVB, },
{ "TSSTcorp CDDVDW SH-S202J", "SB01", ATA_HORKAGE_IVB, },
{ "TSSTcorp CDDVDW SH-S202N", "SB00", ATA_HORKAGE_IVB, },
{ "TSSTcorp CDDVDW SH-S202N", "SB01", ATA_HORKAGE_IVB, },
+ /* Devices that do not need bridging limits applied */
+ { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, },
+
/* End Marker */
{ }
};
struct ata_link *link;
struct ata_device *dev;
- /* If the controller thinks we are 40 wire, we are */
+ /* If the controller thinks we are 40 wire, we are. */
if (ap->cbl == ATA_CBL_PATA40)
return 1;
- /* If the controller thinks we are 80 wire, we are */
+
+ /* If the controller thinks we are 80 wire, we are. */
if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA)
return 0;
- /* If the controller doesn't know we scan
-
- - Note: We look for all 40 wire detects at this point.
- Any 80 wire detect is taken to be 80 wire cable
- because
- - In many setups only the one drive (slave if present)
- will give a valid detect
- - If you have a non detect capable drive you don't
- want it to colour the choice
- */
+
+ /* If the system is known to be 40 wire short cable (eg
+ * laptop), then we allow 80 wire modes even if the drive
+ * isn't sure.
+ */
+ if (ap->cbl == ATA_CBL_PATA40_SHORT)
+ return 0;
+
+ /* If the controller doesn't know, we scan.
+ *
+ * Note: We look for all 40 wire detects at this point. Any
+ * 80 wire detect is taken to be 80 wire cable because
+ * - in many setups only the one drive (slave if present) will
+ * give a valid detect
+ * - if you have a non detect capable drive you don't want it
+ * to colour the choice
+ */
ata_port_for_each_link(link, ap) {
ata_link_for_each_dev(dev, link) {
- if (!ata_is_40wire(dev))
+ if (ata_dev_enabled(dev) && !ata_is_40wire(dev))
return 0;
}
}
}
/**
- * ata_check_atapi_dma - Check whether ATAPI DMA can be supported
+ * atapi_check_dma - Check whether ATAPI DMA can be supported
* @qc: Metadata associated with taskfile to check
*
* Allow low-level driver to filter ATA PACKET commands, returning
* RETURNS: 0 when ATAPI DMA can be used
* nonzero otherwise
*/
-int ata_check_atapi_dma(struct ata_queued_cmd *qc)
+int atapi_check_dma(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
/* Don't allow DMA if it isn't multiple of 16 bytes. Quite a
* few ATAPI devices choke on such DMA requests.
*/
- if (unlikely(qc->nbytes & 15))
+ if (!(qc->dev->horkage & ATA_HORKAGE_ATAPI_MOD16_DMA) &&
+ unlikely(qc->nbytes & 15))
return 1;
if (ap->ops->check_atapi_dma)
/**
* ata_qc_new_init - Request an available ATA command, and initialize it
* @dev: Device from whom we request an available command structure
+ * @tag: command tag
*
* LOCKING:
* None.
/**
* ata_qc_complete - Complete an active ATA command
* @qc: Command to complete
- * @err_mask: ATA Status register contents
*
* Indicate to the mid and upper layers that an ATA
* command has completed, with either an ok or not-ok status.
int sata_scr_read(struct ata_link *link, int reg, u32 *val)
{
if (ata_is_host_link(link)) {
- struct ata_port *ap = link->ap;
-
if (sata_scr_valid(link))
- return ap->ops->scr_read(ap, reg, val);
+ return link->ap->ops->scr_read(link, reg, val);
return -EOPNOTSUPP;
}
int sata_scr_write(struct ata_link *link, int reg, u32 val)
{
if (ata_is_host_link(link)) {
- struct ata_port *ap = link->ap;
-
if (sata_scr_valid(link))
- return ap->ops->scr_write(ap, reg, val);
+ return link->ap->ops->scr_write(link, reg, val);
return -EOPNOTSUPP;
}
int sata_scr_write_flush(struct ata_link *link, int reg, u32 val)
{
if (ata_is_host_link(link)) {
- struct ata_port *ap = link->ap;
int rc;
if (sata_scr_valid(link)) {
- rc = ap->ops->scr_write(ap, reg, val);
+ rc = link->ap->ops->scr_write(link, reg, val);
if (rc == 0)
- rc = ap->ops->scr_read(ap, reg, &val);
+ rc = link->ap->ops->scr_read(link, reg, &val);
return rc;
}
return -EOPNOTSUPP;
}
/**
- * ata_link_online - test whether the given link is online
+ * ata_phys_link_online - test whether the given link is online
* @link: ATA link to test
*
* Test whether @link is online. Note that this function returns
* None.
*
* RETURNS:
- * 1 if the port online status is available and online.
+ * True if the port online status is available and online.
*/
-int ata_link_online(struct ata_link *link)
+bool ata_phys_link_online(struct ata_link *link)
{
u32 sstatus;
if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
(sstatus & 0xf) == 0x3)
- return 1;
- return 0;
+ return true;
+ return false;
}
/**
- * ata_link_offline - test whether the given link is offline
+ * ata_phys_link_offline - test whether the given link is offline
* @link: ATA link to test
*
* Test whether @link is offline. Note that this function
* None.
*
* RETURNS:
- * 1 if the port offline status is available and offline.
+ * True if the port offline status is available and offline.
*/
-int ata_link_offline(struct ata_link *link)
+bool ata_phys_link_offline(struct ata_link *link)
{
u32 sstatus;
if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
(sstatus & 0xf) != 0x3)
- return 1;
- return 0;
+ return true;
+ return false;
+}
+
+/**
+ * ata_link_online - test whether the given link is online
+ * @link: ATA link to test
+ *
+ * Test whether @link is online. This is identical to
+ * ata_phys_link_online() when there's no slave link. When
+ * there's a slave link, this function should only be called on
+ * the master link and will return true if any of M/S links is
+ * online.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * True if the port online status is available and online.
+ */
+bool ata_link_online(struct ata_link *link)
+{
+ struct ata_link *slave = link->ap->slave_link;
+
+ WARN_ON(link == slave); /* shouldn't be called on slave link */
+
+ return ata_phys_link_online(link) ||
+ (slave && ata_phys_link_online(slave));
+}
+
+/**
+ * ata_link_offline - test whether the given link is offline
+ * @link: ATA link to test
+ *
+ * Test whether @link is offline. This is identical to
+ * ata_phys_link_offline() when there's no slave link. When
+ * there's a slave link, this function should only be called on
+ * the master link and will return true if both M/S links are
+ * offline.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * True if the port offline status is available and offline.
+ */
+bool ata_link_offline(struct ata_link *link)
+{
+ struct ata_link *slave = link->ap->slave_link;
+
+ WARN_ON(link == slave); /* shouldn't be called on slave link */
+
+ return ata_phys_link_offline(link) &&
+ (!slave || ata_phys_link_offline(slave));
}
#ifdef CONFIG_PM
*/
void ata_dev_init(struct ata_device *dev)
{
- struct ata_link *link = dev->link;
+ struct ata_link *link = ata_dev_phys_link(dev);
struct ata_port *ap = link->ap;
unsigned long flags;
- /* SATA spd limit is bound to the first device */
+ /* SATA spd limit is bound to the attached device, reset together */
link->sata_spd_limit = link->hw_sata_spd_limit;
link->sata_spd = 0;
*/
int sata_link_init_spd(struct ata_link *link)
{
- u32 scontrol;
u8 spd;
int rc;
- rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
+ rc = sata_scr_read(link, SCR_CONTROL, &link->saved_scontrol);
if (rc)
return rc;
- spd = (scontrol >> 4) & 0xf;
+ spd = (link->saved_scontrol >> 4) & 0xf;
if (spd)
link->hw_sata_spd_limit &= (1 << spd) - 1;
- ata_force_spd_limit(link);
+ ata_force_link_limits(link);
link->sata_spd_limit = link->hw_sata_spd_limit;
#ifdef CONFIG_ATA_SFF
INIT_DELAYED_WORK(&ap->port_task, ata_pio_task);
+#else
+ INIT_DELAYED_WORK(&ap->port_task, NULL);
#endif
INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
INIT_LIST_HEAD(&ap->eh_done_q);
init_waitqueue_head(&ap->eh_wait_q);
+ init_completion(&ap->park_req_pending);
init_timer_deferrable(&ap->fastdrain_timer);
ap->fastdrain_timer.function = ata_eh_fastdrain_timerfn;
ap->fastdrain_timer.data = (unsigned long)ap;
scsi_host_put(ap->scsi_host);
kfree(ap->pmp_link);
+ kfree(ap->slave_link);
kfree(ap);
host->ports[i] = NULL;
}
return host;
}
+/**
+ * ata_slave_link_init - initialize slave link
+ * @ap: port to initialize slave link for
+ *
+ * Create and initialize slave link for @ap. This enables slave
+ * link handling on the port.
+ *
+ * In libata, a port contains links and a link contains devices.
+ * There is single host link but if a PMP is attached to it,
+ * there can be multiple fan-out links. On SATA, there's usually
+ * a single device connected to a link but PATA and SATA
+ * controllers emulating TF based interface can have two - master
+ * and slave.
+ *
+ * However, there are a few controllers which don't fit into this
+ * abstraction too well - SATA controllers which emulate TF
+ * interface with both master and slave devices but also have
+ * separate SCR register sets for each device. These controllers
+ * need separate links for physical link handling
+ * (e.g. onlineness, link speed) but should be treated like a
+ * traditional M/S controller for everything else (e.g. command
+ * issue, softreset).
+ *
+ * slave_link is libata's way of handling this class of
+ * controllers without impacting core layer too much. For
+ * anything other than physical link handling, the default host
+ * link is used for both master and slave. For physical link
+ * handling, separate @ap->slave_link is used. All dirty details
+ * are implemented inside libata core layer. From LLD's POV, the
+ * only difference is that prereset, hardreset and postreset are
+ * called once more for the slave link, so the reset sequence
+ * looks like the following.
+ *
+ * prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) ->
+ * softreset(M) -> postreset(M) -> postreset(S)
+ *
+ * Note that softreset is called only for the master. Softreset
+ * resets both M/S by definition, so SRST on master should handle
+ * both (the standard method will work just fine).
+ *
+ * LOCKING:
+ * Should be called before host is registered.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+int ata_slave_link_init(struct ata_port *ap)
+{
+ struct ata_link *link;
+
+ WARN_ON(ap->slave_link);
+ WARN_ON(ap->flags & ATA_FLAG_PMP);
+
+ link = kzalloc(sizeof(*link), GFP_KERNEL);
+ if (!link)
+ return -ENOMEM;
+
+ ata_link_init(ap, link, 1);
+ ap->slave_link = link;
+ return 0;
+}
+
static void ata_host_stop(struct device *gendev, void *res)
{
struct ata_host *host = dev_get_drvdata(gendev);
*/
static void ata_finalize_port_ops(struct ata_port_operations *ops)
{
- static spinlock_t lock = SPIN_LOCK_UNLOCKED;
+ static DEFINE_SPINLOCK(lock);
const struct ata_port_operations *cur;
void **begin = (void **)ops;
void **end = (void **)&ops->inherits;
/* init sata_spd_limit to the current value */
sata_link_init_spd(&ap->link);
+ if (ap->slave_link)
+ sata_link_init_spd(ap->slave_link);
/* print per-port info to dmesg */
xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask,
spin_lock_irqsave(ap->lock, flags);
ehi->probe_mask |= ATA_ALL_DEVICES;
- ehi->action |= ATA_EH_RESET;
+ ehi->action |= ATA_EH_RESET | ATA_EH_LPM;
ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
ap->pflags &= ~ATA_PFLAG_INITIALIZING;
struct ata_port *ap = host->ports[i];
ata_scsi_scan_host(ap, 1);
- ata_lpm_schedule(ap, ap->pm_policy);
}
return 0;
ata_port_wait_eh(ap);
/* EH is now guaranteed to see UNLOADING - EH context belongs
- * to us. Disable all existing devices.
+ * to us. Restore SControl and disable all existing devices.
*/
- ata_port_for_each_link(link, ap) {
+ __ata_port_for_each_link(link, ap) {
+ sata_scr_write(link, SCR_CONTROL, link->saved_scontrol & 0xff0);
ata_link_for_each_dev(dev, link)
ata_dev_disable(dev);
}
{ "udma133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
{ "udma/133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
{ "udma7", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 7) },
+ { "nohrst", .lflags = ATA_LFLAG_NO_HRST },
+ { "nosrst", .lflags = ATA_LFLAG_NO_SRST },
+ { "norst", .lflags = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
};
char *start = *cur, *p = *cur;
char *id, *val, *endp;
static int __init ata_init(void)
{
- ata_probe_timeout *= HZ;
-
ata_parse_force_param();
ata_wq = create_workqueue("ata");
if (!ata_wq)
- return -ENOMEM;
+ goto free_force_tbl;
ata_aux_wq = create_singlethread_workqueue("ata_aux");
- if (!ata_aux_wq) {
- destroy_workqueue(ata_wq);
- return -ENOMEM;
- }
+ if (!ata_aux_wq)
+ goto free_wq;
printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
return 0;
+
+free_wq:
+ destroy_workqueue(ata_wq);
+free_force_tbl:
+ kfree(ata_force_tbl);
+ return -ENOMEM;
}
static void __exit ata_exit(void)
* @reg: IO-mapped register
* @mask: Mask to apply to read register value
* @val: Wait condition
- * @interval_msec: polling interval in milliseconds
- * @timeout_msec: timeout in milliseconds
+ * @interval: polling interval in milliseconds
+ * @timeout: timeout in milliseconds
*
* Waiting for some bits of register to change is a common
* operation for ATA controllers. This function reads 32bit LE
* The final register value.
*/
u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
- unsigned long interval_msec,
- unsigned long timeout_msec)
+ unsigned long interval, unsigned long timeout)
{
- unsigned long timeout;
+ unsigned long deadline;
u32 tmp;
tmp = ioread32(reg);
* preceding writes reach the controller before starting to
* eat away the timeout.
*/
- timeout = jiffies + (timeout_msec * HZ) / 1000;
+ deadline = ata_deadline(jiffies, timeout);
- while ((tmp & mask) == val && time_before(jiffies, timeout)) {
- msleep(interval_msec);
+ while ((tmp & mask) == val && time_before(jiffies, deadline)) {
+ msleep(interval);
tmp = ioread32(reg);
}
EXPORT_SYMBOL_GPL(sata_deb_timing_long);
EXPORT_SYMBOL_GPL(ata_base_port_ops);
EXPORT_SYMBOL_GPL(sata_port_ops);
-EXPORT_SYMBOL_GPL(sata_pmp_port_ops);
EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
EXPORT_SYMBOL_GPL(ata_dummy_port_info);
+EXPORT_SYMBOL_GPL(__ata_port_next_link);
EXPORT_SYMBOL_GPL(ata_std_bios_param);
EXPORT_SYMBOL_GPL(ata_host_init);
EXPORT_SYMBOL_GPL(ata_host_alloc);
EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
+EXPORT_SYMBOL_GPL(ata_slave_link_init);
EXPORT_SYMBOL_GPL(ata_host_start);
EXPORT_SYMBOL_GPL(ata_host_register);
EXPORT_SYMBOL_GPL(ata_host_activate);
EXPORT_SYMBOL_GPL(ata_sg_init);
EXPORT_SYMBOL_GPL(ata_qc_complete);
EXPORT_SYMBOL_GPL(ata_qc_complete_multiple);
-EXPORT_SYMBOL_GPL(sata_print_link_status);
EXPORT_SYMBOL_GPL(atapi_cmd_type);
EXPORT_SYMBOL_GPL(ata_tf_to_fis);
EXPORT_SYMBOL_GPL(ata_tf_from_fis);
#endif /* CONFIG_PM */
EXPORT_SYMBOL_GPL(ata_id_string);
EXPORT_SYMBOL_GPL(ata_id_c_string);
+EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
#endif /* CONFIG_PM */
#endif /* CONFIG_PCI */
-EXPORT_SYMBOL_GPL(sata_pmp_qc_defer_cmd_switch);
-EXPORT_SYMBOL_GPL(sata_pmp_error_handler);
-
EXPORT_SYMBOL_GPL(__ata_ehi_push_desc);
EXPORT_SYMBOL_GPL(ata_ehi_push_desc);
EXPORT_SYMBOL_GPL(ata_ehi_clear_desc);
EXPORT_SYMBOL_GPL(ata_eh_thaw_port);
EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
+EXPORT_SYMBOL_GPL(ata_eh_analyze_ncq_error);
EXPORT_SYMBOL_GPL(ata_do_eh);
EXPORT_SYMBOL_GPL(ata_std_error_handler);