#include <linux/acpi.h>
#include <linux/libata.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <scsi/scsi_device.h>
#include "libata.h"
#include <acpi/acpi_bus.h>
-#include <acpi/acnames.h>
-#include <acpi/acnamesp.h>
-#include <acpi/acparser.h>
-#include <acpi/acexcep.h>
-#include <acpi/acmacros.h>
-#include <acpi/actypes.h>
-
-enum {
- ATA_ACPI_FILTER_SETXFER = 1 << 0,
- ATA_ACPI_FILTER_LOCK = 1 << 1,
-
- ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER |
- ATA_ACPI_FILTER_LOCK,
-};
-static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
+unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644);
-MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock)");
+MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM, 0x8=FPDMA non-zero offset, 0x10=FPDMA DMA Setup FIS auto-activate)");
#define NO_PORT_MULT 0xffff
#define SATA_ADR(root, pmp) (((root) << 16) | (pmp))
{
WARN_ON(!(ap->flags & ATA_FLAG_ACPI_SATA));
- if (!ap->nr_pmp_links) {
- acpi_integer adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
+ if (!sata_pmp_attached(ap)) {
+ u64 adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
ap->link.device->acpi_handle =
acpi_get_child(ap->host->acpi_handle, adr);
ap->link.device->acpi_handle = NULL;
- ata_port_for_each_link(link, ap) {
- acpi_integer adr = SATA_ADR(ap->port_no, link->pmp);
+ ata_for_each_link(link, ap, EDGE) {
+ u64 adr = SATA_ADR(ap->port_no, link->pmp);
link->device->acpi_handle =
acpi_get_child(ap->host->acpi_handle, adr);
ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
}
-static void ata_acpi_handle_hotplug(struct ata_port *ap, struct kobject *kobj,
+/* @ap and @dev are the same as ata_acpi_handle_hotplug() */
+static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev)
+{
+ if (dev)
+ dev->flags |= ATA_DFLAG_DETACH;
+ else {
+ struct ata_link *tlink;
+ struct ata_device *tdev;
+
+ ata_for_each_link(tlink, ap, EDGE)
+ ata_for_each_dev(tdev, tlink, ALL)
+ tdev->flags |= ATA_DFLAG_DETACH;
+ }
+
+ ata_port_schedule_eh(ap);
+}
+
+/**
+ * ata_acpi_handle_hotplug - ACPI event handler backend
+ * @ap: ATA port ACPI event occurred
+ * @dev: ATA device ACPI event occurred (can be NULL)
+ * @event: ACPI event which occurred
+ *
+ * All ACPI bay / device realted events end up in this function. If
+ * the event is port-wide @dev is NULL. If the event is specific to a
+ * device, @dev points to it.
+ *
+ * Hotplug (as opposed to unplug) notification is always handled as
+ * port-wide while unplug only kills the target device on device-wide
+ * event.
+ *
+ * LOCKING:
+ * ACPI notify handler context. May sleep.
+ */
+static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
u32 event)
{
- char event_string[12];
- char *envp[] = { event_string, NULL };
struct ata_eh_info *ehi = &ap->link.eh_info;
-
- if (event == 0 || event == 1) {
- unsigned long flags;
- spin_lock_irqsave(ap->lock, flags);
- ata_ehi_clear_desc(ehi);
- ata_ehi_push_desc(ehi, "ACPI event");
- ata_ehi_hotplugged(ehi);
- ata_port_freeze(ap);
- spin_unlock_irqrestore(ap->lock, flags);
+ int wait = 0;
+ unsigned long flags;
+ acpi_handle handle;
+
+ if (dev)
+ handle = dev->acpi_handle;
+ else
+ handle = ap->acpi_handle;
+
+ spin_lock_irqsave(ap->lock, flags);
+ /*
+ * When dock driver calls into the routine, it will always use
+ * ACPI_NOTIFY_BUS_CHECK/ACPI_NOTIFY_DEVICE_CHECK for add and
+ * ACPI_NOTIFY_EJECT_REQUEST for remove
+ */
+ switch (event) {
+ case ACPI_NOTIFY_BUS_CHECK:
+ case ACPI_NOTIFY_DEVICE_CHECK:
+ ata_ehi_push_desc(ehi, "ACPI event");
+
+ ata_ehi_hotplugged(ehi);
+ ata_port_freeze(ap);
+ break;
+ case ACPI_NOTIFY_EJECT_REQUEST:
+ ata_ehi_push_desc(ehi, "ACPI event");
+
+ ata_acpi_detach_device(ap, dev);
+ wait = 1;
+ break;
}
- if (kobj) {
- sprintf(event_string, "BAY_EVENT=%d", event);
- kobject_uevent_env(kobj, KOBJ_CHANGE, envp);
- }
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ if (wait)
+ ata_port_wait_eh(ap);
}
-static void ata_acpi_dev_notify(acpi_handle handle, u32 event, void *data)
+static void ata_acpi_dev_notify_dock(acpi_handle handle, u32 event, void *data)
{
struct ata_device *dev = data;
+
+ ata_acpi_handle_hotplug(dev->link->ap, dev, event);
+}
+
+static void ata_acpi_ap_notify_dock(acpi_handle handle, u32 event, void *data)
+{
+ struct ata_port *ap = data;
+
+ ata_acpi_handle_hotplug(ap, NULL, event);
+}
+
+static void ata_acpi_uevent(struct ata_port *ap, struct ata_device *dev,
+ u32 event)
+{
struct kobject *kobj = NULL;
+ char event_string[20];
+ char *envp[] = { event_string, NULL };
- if (dev->sdev)
- kobj = &dev->sdev->sdev_gendev.kobj;
+ if (dev) {
+ if (dev->sdev)
+ kobj = &dev->sdev->sdev_gendev.kobj;
+ } else
+ kobj = &ap->dev->kobj;
- ata_acpi_handle_hotplug(dev->link->ap, kobj, event);
+ if (kobj) {
+ snprintf(event_string, 20, "BAY_EVENT=%d", event);
+ kobject_uevent_env(kobj, KOBJ_CHANGE, envp);
+ }
}
-static void ata_acpi_ap_notify(acpi_handle handle, u32 event, void *data)
+static void ata_acpi_ap_uevent(acpi_handle handle, u32 event, void *data)
{
- struct ata_port *ap = data;
+ ata_acpi_uevent(data, NULL, event);
+}
- ata_acpi_handle_hotplug(ap, &ap->dev->kobj, event);
+static void ata_acpi_dev_uevent(acpi_handle handle, u32 event, void *data)
+{
+ struct ata_device *dev = data;
+ ata_acpi_uevent(dev->link->ap, dev, event);
}
+static struct acpi_dock_ops ata_acpi_dev_dock_ops = {
+ .handler = ata_acpi_dev_notify_dock,
+ .uevent = ata_acpi_dev_uevent,
+};
+
+static struct acpi_dock_ops ata_acpi_ap_dock_ops = {
+ .handler = ata_acpi_ap_notify_dock,
+ .uevent = ata_acpi_ap_uevent,
+};
+
/**
* ata_acpi_associate - associate ATA host with ACPI objects
* @host: target ATA host
else
ata_acpi_associate_ide_port(ap);
- if (ap->acpi_handle)
- acpi_install_notify_handler (ap->acpi_handle,
- ACPI_SYSTEM_NOTIFY,
- ata_acpi_ap_notify,
- ap);
+ if (ap->acpi_handle) {
+ /* we might be on a docking station */
+ register_hotplug_dock_device(ap->acpi_handle,
+ &ata_acpi_ap_dock_ops, ap);
+ }
for (j = 0; j < ata_link_max_devices(&ap->link); j++) {
struct ata_device *dev = &ap->link.device[j];
- if (dev->acpi_handle)
- acpi_install_notify_handler (dev->acpi_handle,
- ACPI_SYSTEM_NOTIFY,
- ata_acpi_dev_notify,
- dev);
+ if (dev->acpi_handle) {
+ /* we might be on a docking station */
+ register_hotplug_dock_device(dev->acpi_handle,
+ &ata_acpi_dev_dock_ops, dev);
+ }
}
}
}
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
- __FUNCTION__, ap->port_no);
+ __func__, ap->port_no);
/* _GTF has no input parameters */
status = acpi_evaluate_object(dev->acpi_handle, "_GTF", NULL, &output);
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: Run _GTF: "
"length or ptr is NULL (0x%llx, 0x%p)\n",
- __FUNCTION__,
+ __func__,
(unsigned long long)output.length,
output.pointer);
rc = -EINVAL;
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG,
"%s: returning gtf=%p, gtf_count=%d\n",
- __FUNCTION__, *gtf, rc);
+ __func__, *gtf, rc);
}
return rc;
return rc;
}
-/* Welcome to ACPI, bring a bucket */
-const unsigned int ata_acpi_pio_cycle[7] = {
- 600, 383, 240, 180, 120, 100, 80
-};
-EXPORT_SYMBOL_GPL(ata_acpi_pio_cycle);
-
-const unsigned int ata_acpi_mwdma_cycle[5] = {
- 480, 150, 120, 100, 80
-};
-EXPORT_SYMBOL_GPL(ata_acpi_mwdma_cycle);
-
-const unsigned int ata_acpi_udma_cycle[7] = {
- 120, 80, 60, 45, 30, 20, 15
-};
-EXPORT_SYMBOL_GPL(ata_acpi_udma_cycle);
-
/**
* ata_acpi_gtm_xfermode - determine xfermode from GTM parameter
* @dev: target device
unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev,
const struct ata_acpi_gtm *gtm)
{
- unsigned long pio_mask = 0, mwdma_mask = 0, udma_mask = 0;
- int unit, i;
- u32 t;
+ unsigned long xfer_mask = 0;
+ unsigned int type;
+ int unit;
+ u8 mode;
/* we always use the 0 slot for crap hardware */
unit = dev->devno;
if (!(gtm->flags & 0x10))
unit = 0;
- /* Values larger than the longest cycle results in 0 mask
- * while values equal to smaller than the shortest cycle
- * results in mask which includes all supported modes.
- * Disabled transfer method has the value of 0xffffffff which
- * will always result in 0 mask.
- */
-
- /* start by scanning for PIO modes */
- t = gtm->drive[unit].pio;
- for (i = 0; i < ARRAY_SIZE(ata_acpi_pio_cycle); i++)
- if (t > ata_acpi_pio_cycle[i])
- break;
- pio_mask = (1 << i) - 1;
+ /* PIO */
+ mode = ata_timing_cycle2mode(ATA_SHIFT_PIO, gtm->drive[unit].pio);
+ xfer_mask |= ata_xfer_mode2mask(mode);
/* See if we have MWDMA or UDMA data. We don't bother with
* MWDMA if UDMA is available as this means the BIOS set UDMA
* and our error changedown if it works is UDMA to PIO anyway.
*/
- t = gtm->drive[unit].dma;
- if (!(gtm->flags & (1 << (2 * unit)))) {
- /* MWDMA */
- for (i = 0; i < ARRAY_SIZE(ata_acpi_mwdma_cycle); i++)
- if (t > ata_acpi_mwdma_cycle[i])
- break;
- mwdma_mask = (1 << i) - 1;
- } else {
- /* UDMA */
- for (i = 0; i < ARRAY_SIZE(ata_acpi_udma_cycle); i++)
- if (t > ata_acpi_udma_cycle[i])
- break;
- udma_mask = (1 << i) - 1;
- }
+ if (!(gtm->flags & (1 << (2 * unit))))
+ type = ATA_SHIFT_MWDMA;
+ else
+ type = ATA_SHIFT_UDMA;
- return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
+ mode = ata_timing_cycle2mode(type, gtm->drive[unit].dma);
+ xfer_mask |= ata_xfer_mode2mask(mode);
+
+ return xfer_mask;
}
EXPORT_SYMBOL_GPL(ata_acpi_gtm_xfermask);
/**
* ata_acpi_cbl_80wire - Check for 80 wire cable
* @ap: Port to check
+ * @gtm: GTM data to use
*
- * Return 1 if the ACPI mode data for this port indicates the BIOS selected
- * an 80wire mode.
+ * Return 1 if the @gtm indicates the BIOS selected an 80wire mode.
*/
-
-int ata_acpi_cbl_80wire(struct ata_port *ap)
+int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm)
{
- const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
- int valid = 0;
+ struct ata_device *dev;
- if (!gtm)
- return 0;
+ ata_for_each_dev(dev, &ap->link, ENABLED) {
+ unsigned long xfer_mask, udma_mask;
+
+ xfer_mask = ata_acpi_gtm_xfermask(dev, gtm);
+ ata_unpack_xfermask(xfer_mask, NULL, NULL, &udma_mask);
+
+ if (udma_mask & ~ATA_UDMA_MASK_40C)
+ return 1;
+ }
- /* Split timing, DMA enabled */
- if ((gtm->flags & 0x11) == 0x11 && gtm->drive[0].dma < 55)
- valid |= 1;
- if ((gtm->flags & 0x14) == 0x14 && gtm->drive[1].dma < 55)
- valid |= 2;
- /* Shared timing, DMA enabled */
- if ((gtm->flags & 0x11) == 0x01 && gtm->drive[0].dma < 55)
- valid |= 1;
- if ((gtm->flags & 0x14) == 0x04 && gtm->drive[0].dma < 55)
- valid |= 2;
-
- /* Drive check */
- if ((valid & 1) && ata_dev_enabled(&ap->link.device[0]))
- return 1;
- if ((valid & 2) && ata_dev_enabled(&ap->link.device[1]))
- return 1;
return 0;
}
-
EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire);
static void ata_acpi_gtf_to_tf(struct ata_device *dev,
tf->command = gtf->tf[6]; /* 0x1f7 */
}
-static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
+static int ata_acpi_filter_tf(struct ata_device *dev,
+ const struct ata_taskfile *tf,
const struct ata_taskfile *ptf)
{
- if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_SETXFER) {
+ if (dev->gtf_filter & ATA_ACPI_FILTER_SETXFER) {
/* libata doesn't use ACPI to configure transfer mode.
* It will only confuse device configuration. Skip.
*/
return 1;
}
- if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_LOCK) {
+ if (dev->gtf_filter & ATA_ACPI_FILTER_LOCK) {
/* BIOS writers, sorry but we don't wanna lock
* features unless the user explicitly said so.
*/
return 1;
}
+ if (tf->command == ATA_CMD_SET_FEATURES &&
+ tf->feature == SETFEATURES_SATA_ENABLE) {
+ /* inhibit enabling DIPM */
+ if (dev->gtf_filter & ATA_ACPI_FILTER_DIPM &&
+ tf->nsect == SATA_DIPM)
+ return 1;
+
+ /* inhibit FPDMA non-zero offset */
+ if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_OFFSET &&
+ (tf->nsect == SATA_FPDMA_OFFSET ||
+ tf->nsect == SATA_FPDMA_IN_ORDER))
+ return 1;
+
+ /* inhibit FPDMA auto activation */
+ if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_AA &&
+ tf->nsect == SATA_FPDMA_AA)
+ return 1;
+ }
+
return 0;
}
struct ata_taskfile tf, ptf, rtf;
unsigned int err_mask;
const char *level;
+ const char *descr;
char msg[60];
int rc;
pptf = &ptf;
}
- if (!ata_acpi_filter_tf(&tf, pptf)) {
+ if (!ata_acpi_filter_tf(dev, &tf, pptf)) {
rtf = tf;
err_mask = ata_exec_internal(dev, &rtf, NULL,
DMA_NONE, NULL, 0, 0);
snprintf(msg, sizeof(msg), "filtered out");
rc = 0;
}
+ descr = ata_get_cmd_descript(tf.command);
ata_dev_printk(dev, level,
- "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x %s\n",
+ "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x (%s) %s\n",
tf.command, tf.feature, tf.nsect, tf.lbal,
- tf.lbam, tf.lbah, tf.device, msg);
+ tf.lbam, tf.lbah, tf.device,
+ (descr ? descr : "unknown"), msg);
return rc;
}
/**
* ata_acpi_exec_tfs - get then write drive taskfile settings
* @dev: target ATA device
- * @nr_executed: out paramter for the number of executed commands
+ * @nr_executed: out parameter for the number of executed commands
*
- * Evaluate _GTF and excute returned taskfiles.
+ * Evaluate _GTF and execute returned taskfiles.
*
* LOCKING:
* EH context.
* EH context.
*
* RETURNS:
- * 0 on success, -errno on failure.
+ * 0 on success, -ENOENT if _SDD doesn't exist, -errno on failure.
*/
static int ata_acpi_push_id(struct ata_device *dev)
{
struct ata_port *ap = dev->link->ap;
- int err;
acpi_status status;
struct acpi_object_list input;
union acpi_object in_params[1];
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: ix = %d, port#: %d\n",
- __FUNCTION__, dev->devno, ap->port_no);
+ __func__, dev->devno, ap->port_no);
/* Give the drive Identify data to the drive via the _SDD method */
/* _SDD: set up input parameters */
status = acpi_evaluate_object(dev->acpi_handle, "_SDD", &input, NULL);
swap_buf_le16(dev->id, ATA_ID_WORDS);
- err = ACPI_FAILURE(status) ? -EIO : 0;
- if (err < 0)
+ if (status == AE_NOT_FOUND)
+ return -ENOENT;
+
+ if (ACPI_FAILURE(status)) {
ata_dev_printk(dev, KERN_WARNING,
"ACPI _SDD failed (AE 0x%x)\n", status);
+ return -EIO;
+ }
- return err;
+ return 0;
}
/**
* use values set by _STM. Cache _GTF result and
* schedule _GTF.
*/
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_for_each_dev(dev, &ap->link, ALL) {
ata_acpi_clear_gtf(dev);
- if (ata_dev_get_GTF(dev, NULL) >= 0)
+ if (ata_dev_enabled(dev) &&
+ ata_dev_get_GTF(dev, NULL) >= 0)
dev->flags |= ATA_DFLAG_ACPI_PENDING;
}
} else {
* there's no reason to evaluate IDE _GTF early
* without _STM. Clear cache and schedule _GTF.
*/
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_for_each_dev(dev, &ap->link, ALL) {
ata_acpi_clear_gtf(dev);
- dev->flags |= ATA_DFLAG_ACPI_PENDING;
+ if (ata_dev_enabled(dev))
+ dev->flags |= ATA_DFLAG_ACPI_PENDING;
}
}
}
if (state.event == PM_EVENT_ON)
acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D0);
- ata_link_for_each_dev(dev, &ap->link) {
- if (dev->acpi_handle && ata_dev_enabled(dev))
+ ata_for_each_dev(dev, &ap->link, ENABLED) {
+ if (dev->acpi_handle)
acpi_bus_set_power(dev->acpi_handle,
state.event == PM_EVENT_ON ?
ACPI_STATE_D0 : ACPI_STATE_D3);
/* do _SDD if SATA */
if (acpi_sata) {
rc = ata_acpi_push_id(dev);
- if (rc)
+ if (rc && rc != -ENOENT)
goto acpi_err;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff