#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
+#include <linux/dmi.h>
#define DRV_NAME "ata_piix"
-#define DRV_VERSION "2.00ac7"
+#define DRV_VERSION "2.12"
enum {
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
ICH5_PMR = 0x90, /* port mapping register */
ICH5_PCS = 0x92, /* port control and status */
- PIIX_SCC = 0x0A, /* sub-class code register */
+ PIIX_SIDPR_BAR = 5,
+ PIIX_SIDPR_LEN = 16,
+ PIIX_SIDPR_IDX = 0,
+ PIIX_SIDPR_DATA = 4,
- PIIX_FLAG_SCR = (1 << 26), /* SCR available */
- PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */
PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */
+ PIIX_FLAG_SIDPR = (1 << 29), /* SATA idx/data pair regs */
PIIX_PATA_FLAGS = ATA_FLAG_SLAVE_POSS,
PIIX_SATA_FLAGS = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR,
- /* combined mode. if set, PATA is channel 0.
- * if clear, PATA is channel 1.
- */
- PIIX_PORT_ENABLED = (1 << 0),
- PIIX_PORT_PRESENT = (1 << 4),
-
PIIX_80C_PRI = (1 << 5) | (1 << 4),
PIIX_80C_SEC = (1 << 7) | (1 << 6),
- /* controller IDs */
- piix_pata_33 = 0, /* PIIX3 or 4 at 33Mhz */
- ich_pata_33 = 1, /* ICH up to UDMA 33 only */
- ich_pata_66 = 2, /* ICH up to 66 Mhz */
- ich_pata_100 = 3, /* ICH up to UDMA 100 */
- ich_pata_133 = 4, /* ICH up to UDMA 133 */
- ich5_sata = 5,
- ich6_sata = 6,
- ich6_sata_ahci = 7,
- ich6m_sata_ahci = 8,
- ich8_sata_ahci = 9,
-
/* constants for mapping table */
P0 = 0, /* port 0 */
P1 = 1, /* port 1 */
RV = -3, /* reserved */
PIIX_AHCI_DEVICE = 6,
+
+ /* host->flags bits */
+ PIIX_HOST_BROKEN_SUSPEND = (1 << 24),
+};
+
+enum piix_controller_ids {
+ /* controller IDs */
+ piix_pata_mwdma, /* PIIX3 MWDMA only */
+ piix_pata_33, /* PIIX4 at 33Mhz */
+ ich_pata_33, /* ICH up to UDMA 33 only */
+ ich_pata_66, /* ICH up to 66 Mhz */
+ ich_pata_100, /* ICH up to UDMA 100 */
+ ich5_sata,
+ ich6_sata,
+ ich6m_sata,
+ ich8_sata,
+ ich8_2port_sata,
+ ich8m_apple_sata, /* locks up on second port enable */
+ tolapai_sata,
+ piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */
};
struct piix_map_db {
struct piix_host_priv {
const int *map;
+ void __iomem *sidpr;
};
-static int piix_init_one (struct pci_dev *pdev,
- const struct pci_device_id *ent);
-static void piix_host_stop(struct ata_host *host);
-static void piix_pata_error_handler(struct ata_port *ap);
-static void ich_pata_error_handler(struct ata_port *ap);
-static void piix_sata_error_handler(struct ata_port *ap);
-static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
-static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
-static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev);
+static int piix_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent);
+static int piix_pata_prereset(struct ata_link *link, unsigned long deadline);
+static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev);
+static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev);
+static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev);
+static int ich_pata_cable_detect(struct ata_port *ap);
+static u8 piix_vmw_bmdma_status(struct ata_port *ap);
+static int piix_sidpr_scr_read(struct ata_port *ap, unsigned int reg, u32 *val);
+static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val);
+#ifdef CONFIG_PM
+static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
+static int piix_pci_device_resume(struct pci_dev *pdev);
+#endif
static unsigned int in_module_init = 1;
static const struct pci_device_id piix_pci_tbl[] = {
-#ifdef ATA_ENABLE_PATA
+ /* Intel PIIX3 for the 430HX etc */
+ { 0x8086, 0x7010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_mwdma },
+ /* VMware ICH4 */
+ { 0x8086, 0x7111, 0x15ad, 0x1976, 0, 0, piix_pata_vmw },
/* Intel PIIX4 for the 430TX/440BX/MX chipset: UDMA 33 */
/* Also PIIX4E (fn3 rev 2) and PIIX4M (fn3 rev 3) */
{ 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
- { 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
- { 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
/* Intel PIIX4 */
{ 0x8086, 0x7199, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
/* Intel PIIX4 */
{ 0x8086, 0x24CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
{ 0x8086, 0x24CB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
/* Intel ICH5 */
- { 0x8086, 0x24DB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_133 },
+ { 0x8086, 0x24DB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
/* C-ICH (i810E2) */
{ 0x8086, 0x245B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
/* ESB (855GME/875P + 6300ESB) UDMA 100 */
/* ICH6 (and 6) (i915) UDMA 100 */
{ 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
/* ICH7/7-R (i945, i975) UDMA 100*/
- { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_133 },
+ { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
{ 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
-#endif
+ /* ICH8 Mobile PATA Controller */
+ { 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
/* NOTE: The following PCI ids must be kept in sync with the
* list in drivers/pci/quirks.c.
/* 82801FB/FW (ICH6/ICH6W) */
{ 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
/* 82801FR/FRW (ICH6R/ICH6RW) */
- { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
- /* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented) */
- { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
+ { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
+ /* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented).
+ * Attach iff the controller is in IDE mode. */
+ { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE << 8, 0xffff00, ich6m_sata },
/* 82801GB/GR/GH (ICH7, identical to ICH6) */
- { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
/* 2801GBM/GHM (ICH7M, identical to ICH6M) */
- { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
+ { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata },
/* Enterprise Southbridge 2 (631xESB/632xESB) */
- { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
/* SATA Controller 1 IDE (ICH8) */
- { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller 2 IDE (ICH8) */
- { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* Mobile SATA Controller IDE (ICH8M), Apple */
+ { 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata },
+ { 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata },
/* Mobile SATA Controller IDE (ICH8M) */
- { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH9) */
- { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH9) */
- { 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH9) */
- { 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH9M) */
- { 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH9M) */
- { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH9M) */
- { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ /* SATA Controller IDE (Tolapai) */
+ { 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, tolapai_sata },
+ /* SATA Controller IDE (ICH10) */
+ { 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ /* SATA Controller IDE (ICH10) */
+ { 0x8086, 0x3a06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (ICH10) */
+ { 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ /* SATA Controller IDE (ICH10) */
+ { 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
{ } /* terminate list */
};
.id_table = piix_pci_tbl,
.probe = piix_init_one,
.remove = ata_pci_remove_one,
- .suspend = ata_pci_device_suspend,
- .resume = ata_pci_device_resume,
+#ifdef CONFIG_PM
+ .suspend = piix_pci_device_suspend,
+ .resume = piix_pci_device_resume,
+#endif
};
static struct scsi_host_template piix_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations piix_pata_ops = {
- .port_disable = ata_port_disable,
+static struct ata_port_operations piix_pata_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = ata_cable_40wire,
.set_piomode = piix_set_piomode,
.set_dmamode = piix_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_pio_data_xfer,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = piix_pata_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
-
- .port_start = ata_port_start,
- .port_stop = ata_port_stop,
- .host_stop = piix_host_stop,
+ .prereset = piix_pata_prereset,
};
-static const struct ata_port_operations ich_pata_ops = {
- .port_disable = ata_port_disable,
- .set_piomode = piix_set_piomode,
+static struct ata_port_operations piix_vmw_ops = {
+ .inherits = &piix_pata_ops,
+ .bmdma_status = piix_vmw_bmdma_status,
+};
+
+static struct ata_port_operations ich_pata_ops = {
+ .inherits = &piix_pata_ops,
+ .cable_detect = ich_pata_cable_detect,
.set_dmamode = ich_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_pio_data_xfer,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ich_pata_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
-
- .port_start = ata_port_start,
- .port_stop = ata_port_stop,
- .host_stop = piix_host_stop,
};
-static const struct ata_port_operations piix_sata_ops = {
- .port_disable = ata_port_disable,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_pio_data_xfer,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = piix_sata_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
-
- .port_start = ata_port_start,
- .port_stop = ata_port_stop,
- .host_stop = piix_host_stop,
+static struct ata_port_operations piix_sata_ops = {
+ .inherits = &ata_bmdma_port_ops,
+};
+
+static struct ata_port_operations piix_sidpr_sata_ops = {
+ .inherits = &piix_sata_ops,
+ .hardreset = sata_std_hardreset,
+ .scr_read = piix_sidpr_scr_read,
+ .scr_write = piix_sidpr_scr_write,
};
static const struct piix_map_db ich5_map_db = {
*/
.map = {
/* PM PS SM SS MAP */
- { P0, P2, RV, RV }, /* 00b */
+ { P0, P2, NA, NA }, /* 00b */
{ IDE, IDE, P1, P3 }, /* 01b */
{ P0, P2, IDE, IDE }, /* 10b */
{ RV, RV, RV, RV },
static const struct piix_map_db ich8_map_db = {
.mask = 0x3,
- .port_enable = 0x3,
+ .port_enable = 0xf,
.map = {
/* PM PS SM SS MAP */
{ P0, P2, P1, P3 }, /* 00b (hardwired when in AHCI) */
{ RV, RV, RV, RV },
- { IDE, IDE, NA, NA }, /* 10b (IDE mode) */
+ { P0, P2, IDE, IDE }, /* 10b (IDE mode) */
+ { RV, RV, RV, RV },
+ },
+};
+
+static const struct piix_map_db ich8_2port_map_db = {
+ .mask = 0x3,
+ .port_enable = 0x3,
+ .map = {
+ /* PM PS SM SS MAP */
+ { P0, NA, P1, NA }, /* 00b */
+ { RV, RV, RV, RV }, /* 01b */
+ { RV, RV, RV, RV }, /* 10b */
+ { RV, RV, RV, RV },
+ },
+};
+
+static const struct piix_map_db ich8m_apple_map_db = {
+ .mask = 0x3,
+ .port_enable = 0x1,
+ .map = {
+ /* PM PS SM SS MAP */
+ { P0, NA, NA, NA }, /* 00b */
+ { RV, RV, RV, RV },
+ { P0, P2, IDE, IDE }, /* 10b */
+ { RV, RV, RV, RV },
+ },
+};
+
+static const struct piix_map_db tolapai_map_db = {
+ .mask = 0x3,
+ .port_enable = 0x3,
+ .map = {
+ /* PM PS SM SS MAP */
+ { P0, NA, P1, NA }, /* 00b */
+ { RV, RV, RV, RV }, /* 01b */
+ { RV, RV, RV, RV }, /* 10b */
{ RV, RV, RV, RV },
},
};
static const struct piix_map_db *piix_map_db_table[] = {
[ich5_sata] = &ich5_map_db,
[ich6_sata] = &ich6_map_db,
- [ich6_sata_ahci] = &ich6_map_db,
- [ich6m_sata_ahci] = &ich6m_map_db,
- [ich8_sata_ahci] = &ich8_map_db,
+ [ich6m_sata] = &ich6m_map_db,
+ [ich8_sata] = &ich8_map_db,
+ [ich8_2port_sata] = &ich8_2port_map_db,
+ [ich8m_apple_sata] = &ich8m_apple_map_db,
+ [tolapai_sata] = &tolapai_map_db,
};
static struct ata_port_info piix_port_info[] = {
- /* piix_pata_33: 0: PIIX3 or 4 at 33MHz */
+ [piix_pata_mwdma] = /* PIIX3 MWDMA only */
+ {
+ .flags = PIIX_PATA_FLAGS,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
+ .port_ops = &piix_pata_ops,
+ },
+
+ [piix_pata_33] = /* PIIX4 at 33MHz */
{
- .sht = &piix_sht,
.flags = PIIX_PATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
.port_ops = &piix_pata_ops,
},
- /* ich_pata_33: 1 ICH0 - ICH at 33Mhz*/
+ [ich_pata_33] = /* ICH0 - ICH at 33Mhz*/
{
- .sht = &piix_sht,
.flags = PIIX_PATA_FLAGS,
.pio_mask = 0x1f, /* pio 0-4 */
.mwdma_mask = 0x06, /* Check: maybe 0x07 */
.udma_mask = ATA_UDMA2, /* UDMA33 */
.port_ops = &ich_pata_ops,
},
- /* ich_pata_66: 2 ICH controllers up to 66MHz */
+
+ [ich_pata_66] = /* ICH controllers up to 66MHz */
{
- .sht = &piix_sht,
.flags = PIIX_PATA_FLAGS,
.pio_mask = 0x1f, /* pio 0-4 */
.mwdma_mask = 0x06, /* MWDMA0 is broken on chip */
.port_ops = &ich_pata_ops,
},
- /* ich_pata_100: 3 */
+ [ich_pata_100] =
{
- .sht = &piix_sht,
.flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x06, /* mwdma1-2 */
.port_ops = &ich_pata_ops,
},
- /* ich_pata_133: 4 ICH with full UDMA6 */
+ [ich5_sata] =
{
- .sht = &piix_sht,
- .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
- .pio_mask = 0x1f, /* pio 0-4 */
- .mwdma_mask = 0x06, /* Check: maybe 0x07 */
- .udma_mask = ATA_UDMA6, /* UDMA133 */
- .port_ops = &ich_pata_ops,
+ .flags = PIIX_SATA_FLAGS,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &piix_sata_ops,
},
- /* ich5_sata: 5 */
+ [ich6_sata] =
{
- .sht = &piix_sht,
.flags = PIIX_SATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x7f, /* udma0-6 */
+ .udma_mask = ATA_UDMA6,
.port_ops = &piix_sata_ops,
},
- /* ich6_sata: 6 */
+ [ich6m_sata] =
{
- .sht = &piix_sht,
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR,
+ .flags = PIIX_SATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x7f, /* udma0-6 */
+ .udma_mask = ATA_UDMA6,
.port_ops = &piix_sata_ops,
},
- /* ich6_sata_ahci: 7 */
+ [ich8_sata] =
{
- .sht = &piix_sht,
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
- PIIX_FLAG_AHCI,
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x7f, /* udma0-6 */
+ .udma_mask = ATA_UDMA6,
.port_ops = &piix_sata_ops,
},
- /* ich6m_sata_ahci: 8 */
+ [ich8_2port_sata] =
{
- .sht = &piix_sht,
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
- PIIX_FLAG_AHCI,
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x7f, /* udma0-6 */
+ .udma_mask = ATA_UDMA6,
.port_ops = &piix_sata_ops,
},
- /* ich8_sata_ahci: 9 */
+ [tolapai_sata] =
{
- .sht = &piix_sht,
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
- PIIX_FLAG_AHCI,
+ .flags = PIIX_SATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x7f, /* udma0-6 */
+ .udma_mask = ATA_UDMA6,
.port_ops = &piix_sata_ops,
},
+ [ich8m_apple_sata] =
+ {
+ .flags = PIIX_SATA_FLAGS,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &piix_sata_ops,
+ },
+
+ [piix_pata_vmw] =
+ {
+ .flags = PIIX_PATA_FLAGS,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
+ .udma_mask = ATA_UDMA_MASK_40C,
+ .port_ops = &piix_vmw_ops,
+ },
+
};
static struct pci_bits piix_enable_bits[] = {
static const struct ich_laptop ich_laptop[] = {
/* devid, subvendor, subdev */
{ 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */
+ { 0x27DF, 0x1025, 0x0102 }, /* ICH7 on Acer 5602aWLMi */
+ { 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */
+ { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
+ { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
+ { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */
+ { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */
+ { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */
+ { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
/* end marker */
{ 0, }
};
/**
- * piix_pata_cbl_detect - Probe host controller cable detect info
+ * ich_pata_cable_detect - Probe host controller cable detect info
* @ap: Port for which cable detect info is desired
*
* Read 80c cable indicator from ATA PCI device's PCI config
* None (inherited from caller).
*/
-static void ich_pata_cbl_detect(struct ata_port *ap)
+static int ich_pata_cable_detect(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
const struct ich_laptop *lap = &ich_laptop[0];
u8 tmp, mask;
- /* no 80c support in host controller? */
- if ((ap->udma_mask & ~ATA_UDMA_MASK_40C) == 0)
- goto cbl40;
-
/* Check for specials - Acer Aspire 5602WLMi */
while (lap->device) {
if (lap->device == pdev->device &&
lap->subvendor == pdev->subsystem_vendor &&
- lap->subdevice == pdev->subsystem_device) {
- ap->cbl = ATA_CBL_PATA40_SHORT;
- return;
- }
+ lap->subdevice == pdev->subsystem_device)
+ return ATA_CBL_PATA40_SHORT;
+
lap++;
}
mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC;
pci_read_config_byte(pdev, PIIX_IOCFG, &tmp);
if ((tmp & mask) == 0)
- goto cbl40;
-
- ap->cbl = ATA_CBL_PATA80;
- return;
-
-cbl40:
- ap->cbl = ATA_CBL_PATA40;
+ return ATA_CBL_PATA40;
+ return ATA_CBL_PATA80;
}
/**
* piix_pata_prereset - prereset for PATA host controller
- * @ap: Target port
- *
+ * @link: Target link
+ * @deadline: deadline jiffies for the operation
*
* LOCKING:
* None (inherited from caller).
*/
-static int piix_pata_prereset(struct ata_port *ap)
+static int piix_pata_prereset(struct ata_link *link, unsigned long deadline)
{
+ struct ata_port *ap = link->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
return -ENOENT;
-
- ap->cbl = ATA_CBL_PATA40;
- return ata_std_prereset(ap);
-}
-
-static void piix_pata_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, piix_pata_prereset, ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
-
-/**
- * ich_pata_prereset - prereset for PATA host controller
- * @ap: Target port
- *
- *
- * LOCKING:
- * None (inherited from caller).
- */
-static int ich_pata_prereset(struct ata_port *ap)
-{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
- if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) {
- ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
- ap->eh_context.i.action &= ~ATA_EH_RESET_MASK;
- return 0;
- }
-
- ich_pata_cbl_detect(ap);
-
- return ata_std_prereset(ap);
-}
-
-static void ich_pata_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, ich_pata_prereset, ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
-static void piix_sata_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL,
- ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
/**
* None (inherited from caller).
*/
-static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev)
+static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
unsigned int pio = adev->pio_mode - XFER_PIO_0;
struct pci_dev *dev = to_pci_dev(ap->host->dev);
if (adev->class == ATA_DEV_ATA)
control |= 4; /* PPE enable */
+ /* PIO configuration clears DTE unconditionally. It will be
+ * programmed in set_dmamode which is guaranteed to be called
+ * after set_piomode if any DMA mode is available.
+ */
pci_read_config_word(dev, master_port, &master_data);
if (is_slave) {
- /* Enable SITRE (seperate slave timing register) */
+ /* clear TIME1|IE1|PPE1|DTE1 */
+ master_data &= 0xff0f;
+ /* Enable SITRE (separate slave timing register) */
master_data |= 0x4000;
/* enable PPE1, IE1 and TIME1 as needed */
master_data |= (control << 4);
pci_read_config_byte(dev, slave_port, &slave_data);
slave_data &= (ap->port_no ? 0x0f : 0xf0);
/* Load the timing nibble for this slave */
- slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
+ slave_data |= ((timings[pio][0] << 2) | timings[pio][1])
+ << (ap->port_no ? 4 : 0);
} else {
- /* Master keeps the bits in a different format */
- master_data &= 0xccf8;
+ /* clear ISP|RCT|TIME0|IE0|PPE0|DTE0 */
+ master_data &= 0xccf0;
/* Enable PPE, IE and TIME as appropriate */
master_data |= control;
+ /* load ISP and RCT */
master_data |=
(timings[pio][0] << 12) |
(timings[pio][1] << 8);
* None (inherited from caller).
*/
-static void do_pata_set_dmamode (struct ata_port *ap, struct ata_device *adev, int isich)
+static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, int isich)
{
struct pci_dev *dev = to_pci_dev(ap->host->dev);
u8 master_port = ap->port_no ? 0x42 : 0x40;
u16 master_data;
u8 speed = adev->dma_mode;
int devid = adev->devno + 2 * ap->port_no;
- u8 udma_enable;
+ u8 udma_enable = 0;
static const /* ISP RTC */
u8 timings[][2] = { { 0, 0 },
{ 2, 3 }, };
pci_read_config_word(dev, master_port, &master_data);
- pci_read_config_byte(dev, 0x48, &udma_enable);
+ if (ap->udma_mask)
+ pci_read_config_byte(dev, 0x48, &udma_enable);
if (speed >= XFER_UDMA_0) {
unsigned int udma = adev->dma_mode - XFER_UDMA_0;
int u_clock, u_speed;
/*
- * UDMA is handled by a combination of clock switching and
+ * UDMA is handled by a combination of clock switching and
* selection of dividers
*
* Handy rule: Odd modes are UDMATIMx 01, even are 02
master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */
master_data |= control << 4;
pci_read_config_byte(dev, 0x44, &slave_data);
- slave_data &= (0x0F + 0xE1 * ap->port_no);
+ slave_data &= (ap->port_no ? 0x0f : 0xf0);
/* Load the matching timing */
slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
pci_write_config_byte(dev, 0x44, slave_data);
(timings[pio][0] << 12) |
(timings[pio][1] << 8);
}
- udma_enable &= ~(1 << devid);
- pci_write_config_word(dev, master_port, master_data);
+
+ if (ap->udma_mask) {
+ udma_enable &= ~(1 << devid);
+ pci_write_config_word(dev, master_port, master_data);
+ }
}
/* Don't scribble on 0x48 if the controller does not support UDMA */
if (ap->udma_mask)
* None (inherited from caller).
*/
-static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev)
+static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
do_pata_set_dmamode(ap, adev, 0);
}
* None (inherited from caller).
*/
-static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev)
+static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
do_pata_set_dmamode(ap, adev, 1);
}
+/*
+ * Serial ATA Index/Data Pair Superset Registers access
+ *
+ * Beginning from ICH8, there's a sane way to access SCRs using index
+ * and data register pair located at BAR5. This creates an
+ * interesting problem of mapping two SCRs to one port.
+ *
+ * Although they have separate SCRs, the master and slave aren't
+ * independent enough to be treated as separate links - e.g. softreset
+ * resets both. Also, there's no protocol defined for hard resetting
+ * singled device sharing the virtual port (no defined way to acquire
+ * device signature). This is worked around by merging the SCR values
+ * into one sensible value and requesting follow-up SRST after
+ * hardreset.
+ *
+ * SCR merging is perfomed in nibbles which is the unit contents in
+ * SCRs are organized. If two values are equal, the value is used.
+ * When they differ, merge table which lists precedence of possible
+ * values is consulted and the first match or the last entry when
+ * nothing matches is used. When there's no merge table for the
+ * specific nibble, value from the first port is used.
+ */
+static const int piix_sidx_map[] = {
+ [SCR_STATUS] = 0,
+ [SCR_ERROR] = 2,
+ [SCR_CONTROL] = 1,
+};
+
+static void piix_sidpr_sel(struct ata_device *dev, unsigned int reg)
+{
+ struct ata_port *ap = dev->link->ap;
+ struct piix_host_priv *hpriv = ap->host->private_data;
+
+ iowrite32(((ap->port_no * 2 + dev->devno) << 8) | piix_sidx_map[reg],
+ hpriv->sidpr + PIIX_SIDPR_IDX);
+}
+
+static int piix_sidpr_read(struct ata_device *dev, unsigned int reg)
+{
+ struct piix_host_priv *hpriv = dev->link->ap->host->private_data;
+
+ piix_sidpr_sel(dev, reg);
+ return ioread32(hpriv->sidpr + PIIX_SIDPR_DATA);
+}
+
+static void piix_sidpr_write(struct ata_device *dev, unsigned int reg, u32 val)
+{
+ struct piix_host_priv *hpriv = dev->link->ap->host->private_data;
+
+ piix_sidpr_sel(dev, reg);
+ iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA);
+}
+
+static u32 piix_merge_scr(u32 val0, u32 val1, const int * const *merge_tbl)
+{
+ u32 val = 0;
+ int i, mi;
+
+ for (i = 0, mi = 0; i < 32 / 4; i++) {
+ u8 c0 = (val0 >> (i * 4)) & 0xf;
+ u8 c1 = (val1 >> (i * 4)) & 0xf;
+ u8 merged = c0;
+ const int *cur;
+
+ /* if no merge preference, assume the first value */
+ cur = merge_tbl[mi];
+ if (!cur)
+ goto done;
+ mi++;
+
+ /* if two values equal, use it */
+ if (c0 == c1)
+ goto done;
+
+ /* choose the first match or the last from the merge table */
+ while (*cur != -1) {
+ if (c0 == *cur || c1 == *cur)
+ break;
+ cur++;
+ }
+ if (*cur == -1)
+ cur--;
+ merged = *cur;
+ done:
+ val |= merged << (i * 4);
+ }
+
+ return val;
+}
+
+static int piix_sidpr_scr_read(struct ata_port *ap, unsigned int reg, u32 *val)
+{
+ const int * const sstatus_merge_tbl[] = {
+ /* DET */ (const int []){ 1, 3, 0, 4, 3, -1 },
+ /* SPD */ (const int []){ 2, 1, 0, -1 },
+ /* IPM */ (const int []){ 6, 2, 1, 0, -1 },
+ NULL,
+ };
+ const int * const scontrol_merge_tbl[] = {
+ /* DET */ (const int []){ 1, 0, 4, 0, -1 },
+ /* SPD */ (const int []){ 0, 2, 1, 0, -1 },
+ /* IPM */ (const int []){ 0, 1, 2, 3, 0, -1 },
+ NULL,
+ };
+ u32 v0, v1;
+
+ if (reg >= ARRAY_SIZE(piix_sidx_map))
+ return -EINVAL;
+
+ if (!(ap->flags & ATA_FLAG_SLAVE_POSS)) {
+ *val = piix_sidpr_read(&ap->link.device[0], reg);
+ return 0;
+ }
+
+ v0 = piix_sidpr_read(&ap->link.device[0], reg);
+ v1 = piix_sidpr_read(&ap->link.device[1], reg);
+
+ switch (reg) {
+ case SCR_STATUS:
+ *val = piix_merge_scr(v0, v1, sstatus_merge_tbl);
+ break;
+ case SCR_ERROR:
+ *val = v0 | v1;
+ break;
+ case SCR_CONTROL:
+ *val = piix_merge_scr(v0, v1, scontrol_merge_tbl);
+ break;
+ }
+
+ return 0;
+}
+
+static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val)
+{
+ if (reg >= ARRAY_SIZE(piix_sidx_map))
+ return -EINVAL;
+
+ piix_sidpr_write(&ap->link.device[0], reg, val);
+
+ if (ap->flags & ATA_FLAG_SLAVE_POSS)
+ piix_sidpr_write(&ap->link.device[1], reg, val);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int piix_broken_suspend(void)
+{
+ static const struct dmi_system_id sysids[] = {
+ {
+ .ident = "TECRA M3",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M3"),
+ },
+ },
+ {
+ .ident = "TECRA M3",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Tecra M3"),
+ },
+ },
+ {
+ .ident = "TECRA M4",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Tecra M4"),
+ },
+ },
+ {
+ .ident = "TECRA M5",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M5"),
+ },
+ },
+ {
+ .ident = "TECRA M6",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M6"),
+ },
+ },
+ {
+ .ident = "TECRA M7",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M7"),
+ },
+ },
+ {
+ .ident = "TECRA A8",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A8"),
+ },
+ },
+ {
+ .ident = "Satellite R20",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite R20"),
+ },
+ },
+ {
+ .ident = "Satellite R25",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite R25"),
+ },
+ },
+ {
+ .ident = "Satellite U200",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U200"),
+ },
+ },
+ {
+ .ident = "Satellite U200",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE U200"),
+ },
+ },
+ {
+ .ident = "Satellite Pro U200",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE PRO U200"),
+ },
+ },
+ {
+ .ident = "Satellite U205",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U205"),
+ },
+ },
+ {
+ .ident = "SATELLITE U205",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE U205"),
+ },
+ },
+ {
+ .ident = "Portege M500",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M500"),
+ },
+ },
+
+ { } /* terminate list */
+ };
+ static const char *oemstrs[] = {
+ "Tecra M3,",
+ };
+ int i;
+
+ if (dmi_check_system(sysids))
+ return 1;
+
+ for (i = 0; i < ARRAY_SIZE(oemstrs); i++)
+ if (dmi_find_device(DMI_DEV_TYPE_OEM_STRING, oemstrs[i], NULL))
+ return 1;
+
+ return 0;
+}
+
+static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ unsigned long flags;
+ int rc = 0;
+
+ rc = ata_host_suspend(host, mesg);
+ if (rc)
+ return rc;
+
+ /* Some braindamaged ACPI suspend implementations expect the
+ * controller to be awake on entry; otherwise, it burns cpu
+ * cycles and power trying to do something to the sleeping
+ * beauty.
+ */
+ if (piix_broken_suspend() && (mesg.event & PM_EVENT_SLEEP)) {
+ pci_save_state(pdev);
+
+ /* mark its power state as "unknown", since we don't
+ * know if e.g. the BIOS will change its device state
+ * when we suspend.
+ */
+ if (pdev->current_state == PCI_D0)
+ pdev->current_state = PCI_UNKNOWN;
+
+ /* tell resume that it's waking up from broken suspend */
+ spin_lock_irqsave(&host->lock, flags);
+ host->flags |= PIIX_HOST_BROKEN_SUSPEND;
+ spin_unlock_irqrestore(&host->lock, flags);
+ } else
+ ata_pci_device_do_suspend(pdev, mesg);
+
+ return 0;
+}
+
+static int piix_pci_device_resume(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ unsigned long flags;
+ int rc;
+
+ if (host->flags & PIIX_HOST_BROKEN_SUSPEND) {
+ spin_lock_irqsave(&host->lock, flags);
+ host->flags &= ~PIIX_HOST_BROKEN_SUSPEND;
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+
+ /* PCI device wasn't disabled during suspend. Use
+ * pci_reenable_device() to avoid affecting the enable
+ * count.
+ */
+ rc = pci_reenable_device(pdev);
+ if (rc)
+ dev_printk(KERN_ERR, &pdev->dev, "failed to enable "
+ "device after resume (%d)\n", rc);
+ } else
+ rc = ata_pci_device_do_resume(pdev);
+
+ if (rc == 0)
+ ata_host_resume(host);
+
+ return rc;
+}
+#endif
+
+static u8 piix_vmw_bmdma_status(struct ata_port *ap)
+{
+ return ata_bmdma_status(ap) & ~ATA_DMA_ERR;
+}
+
#define AHCI_PCI_BAR 5
#define AHCI_GLOBAL_CTL 0x04
#define AHCI_ENABLE (1 << 31)
if (!mmio)
return -ENOMEM;
- tmp = readl(mmio + AHCI_GLOBAL_CTL);
+ tmp = ioread32(mmio + AHCI_GLOBAL_CTL);
if (tmp & AHCI_ENABLE) {
tmp &= ~AHCI_ENABLE;
- writel(tmp, mmio + AHCI_GLOBAL_CTL);
+ iowrite32(tmp, mmio + AHCI_GLOBAL_CTL);
- tmp = readl(mmio + AHCI_GLOBAL_CTL);
+ tmp = ioread32(mmio + AHCI_GLOBAL_CTL);
if (tmp & AHCI_ENABLE)
rc = -EIO;
}
{
struct pci_dev *pdev = NULL;
u16 cfg;
- u8 rev;
int no_piix_dma = 0;
- while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL)
- {
+ while ((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL) {
/* Look for 450NX PXB. Check for problem configurations
A PCI quirk checks bit 6 already */
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
pci_read_config_word(pdev, 0x41, &cfg);
/* Only on the original revision: IDE DMA can hang */
- if (rev == 0x00)
+ if (pdev->revision == 0x00)
no_piix_dma = 1;
/* On all revisions below 5 PXB bus lock must be disabled for IDE */
- else if (cfg & (1<<14) && rev < 5)
+ else if (cfg & (1<<14) && pdev->revision < 5)
no_piix_dma = 2;
}
if (no_piix_dma)
return no_piix_dma;
}
-static void __devinit piix_init_pcs(struct pci_dev *pdev,
- struct ata_port_info *pinfo,
+static void __devinit piix_init_pcs(struct ata_host *host,
const struct piix_map_db *map_db)
{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
u16 pcs, new_pcs;
pci_read_config_word(pdev, ICH5_PCS, &pcs);
}
}
-static void __devinit piix_init_sata_map(struct pci_dev *pdev,
- struct ata_port_info *pinfo,
- const struct piix_map_db *map_db)
+static const int *__devinit piix_init_sata_map(struct pci_dev *pdev,
+ struct ata_port_info *pinfo,
+ const struct piix_map_db *map_db)
{
- struct piix_host_priv *hpriv = pinfo[0].private_data;
- const unsigned int *map;
+ const int *map;
int i, invalid_map = 0;
u8 map_value;
case IDE:
WARN_ON((i & 1) || map[i + 1] != IDE);
pinfo[i / 2] = piix_port_info[ich_pata_100];
- pinfo[i / 2].private_data = hpriv;
i++;
printk(" IDE IDE");
break;
dev_printk(KERN_ERR, &pdev->dev,
"invalid MAP value %u\n", map_value);
- hpriv->map = map;
+ return map;
+}
+
+static void __devinit piix_init_sidpr(struct ata_host *host)
+{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ struct piix_host_priv *hpriv = host->private_data;
+ struct ata_device *dev0 = &host->ports[0]->link.device[0];
+ u32 scontrol;
+ int i;
+
+ /* check for availability */
+ for (i = 0; i < 4; i++)
+ if (hpriv->map[i] == IDE)
+ return;
+
+ if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR))
+ return;
+
+ if (pci_resource_start(pdev, PIIX_SIDPR_BAR) == 0 ||
+ pci_resource_len(pdev, PIIX_SIDPR_BAR) != PIIX_SIDPR_LEN)
+ return;
+
+ if (pcim_iomap_regions(pdev, 1 << PIIX_SIDPR_BAR, DRV_NAME))
+ return;
+
+ hpriv->sidpr = pcim_iomap_table(pdev)[PIIX_SIDPR_BAR];
+
+ /* SCR access via SIDPR doesn't work on some configurations.
+ * Give it a test drive by inhibiting power save modes which
+ * we'll do anyway.
+ */
+ scontrol = piix_sidpr_read(dev0, SCR_CONTROL);
+
+ /* if IPM is already 3, SCR access is probably working. Don't
+ * un-inhibit power save modes as BIOS might have inhibited
+ * them for a reason.
+ */
+ if ((scontrol & 0xf00) != 0x300) {
+ scontrol |= 0x300;
+ piix_sidpr_write(dev0, SCR_CONTROL, scontrol);
+ scontrol = piix_sidpr_read(dev0, SCR_CONTROL);
+
+ if ((scontrol & 0xf00) != 0x300) {
+ dev_printk(KERN_INFO, host->dev, "SCR access via "
+ "SIDPR is available but doesn't work\n");
+ return;
+ }
+ }
+
+ host->ports[0]->ops = &piix_sidpr_sata_ops;
+ host->ports[1]->ops = &piix_sidpr_sata_ops;
+}
+
+static void piix_iocfg_bit18_quirk(struct pci_dev *pdev)
+{
+ static const struct dmi_system_id sysids[] = {
+ {
+ /* Clevo M570U sets IOCFG bit 18 if the cdrom
+ * isn't used to boot the system which
+ * disables the channel.
+ */
+ .ident = "M570U",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "M570U"),
+ },
+ },
+
+ { } /* terminate list */
+ };
+ u32 iocfg;
+
+ if (!dmi_check_system(sysids))
+ return;
+
+ /* The datasheet says that bit 18 is NOOP but certain systems
+ * seem to use it to disable a channel. Clear the bit on the
+ * affected systems.
+ */
+ pci_read_config_dword(pdev, PIIX_IOCFG, &iocfg);
+ if (iocfg & (1 << 18)) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "applying IOCFG bit18 quirk\n");
+ iocfg &= ~(1 << 18);
+ pci_write_config_dword(pdev, PIIX_IOCFG, iocfg);
+ }
}
/**
* Zero on success, or -ERRNO value.
*/
-static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int __devinit piix_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
static int printed_version;
+ struct device *dev = &pdev->dev;
struct ata_port_info port_info[2];
- struct ata_port_info *ppinfo[2] = { &port_info[0], &port_info[1] };
- struct piix_host_priv *hpriv;
+ const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] };
unsigned long port_flags;
+ struct ata_host *host;
+ struct piix_host_priv *hpriv;
+ int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
if (!in_module_init)
return -ENODEV;
- hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL);
- if (!hpriv)
- return -ENOMEM;
-
port_info[0] = piix_port_info[ent->driver_data];
port_info[1] = piix_port_info[ent->driver_data];
- port_info[0].private_data = hpriv;
- port_info[1].private_data = hpriv;
port_flags = port_info[0].flags;
- if (port_flags & PIIX_FLAG_AHCI) {
- u8 tmp;
- pci_read_config_byte(pdev, PIIX_SCC, &tmp);
- if (tmp == PIIX_AHCI_DEVICE) {
- int rc = piix_disable_ahci(pdev);
- if (rc)
- return rc;
- }
+ /* enable device and prepare host */
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ /* ICH6R may be driven by either ata_piix or ahci driver
+ * regardless of BIOS configuration. Make sure AHCI mode is
+ * off.
+ */
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) {
+ int rc = piix_disable_ahci(pdev);
+ if (rc)
+ return rc;
}
- /* Initialize SATA map */
+ /* SATA map init can change port_info, do it before prepping host */
+ hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
+ if (!hpriv)
+ return -ENOMEM;
+
+ if (port_flags & ATA_FLAG_SATA)
+ hpriv->map = piix_init_sata_map(pdev, port_info,
+ piix_map_db_table[ent->driver_data]);
+
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ if (rc)
+ return rc;
+ host->private_data = hpriv;
+
+ /* initialize controller */
if (port_flags & ATA_FLAG_SATA) {
- piix_init_sata_map(pdev, port_info,
- piix_map_db_table[ent->driver_data]);
- piix_init_pcs(pdev, port_info,
- piix_map_db_table[ent->driver_data]);
+ piix_init_pcs(host, piix_map_db_table[ent->driver_data]);
+ piix_init_sidpr(host);
}
+ /* apply IOCFG bit18 quirk */
+ piix_iocfg_bit18_quirk(pdev);
+
/* On ICH5, some BIOSen disable the interrupt using the
* PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3.
* On ICH6, this bit has the same effect, but only when
/* This writes into the master table but it does not
really matter for this errata as we will apply it to
all the PIIX devices on the board */
- port_info[0].mwdma_mask = 0;
- port_info[0].udma_mask = 0;
- port_info[1].mwdma_mask = 0;
- port_info[1].udma_mask = 0;
+ host->ports[0]->mwdma_mask = 0;
+ host->ports[0]->udma_mask = 0;
+ host->ports[1]->mwdma_mask = 0;
+ host->ports[1]->udma_mask = 0;
}
- return ata_pci_init_one(pdev, ppinfo, 2);
-}
-
-static void piix_host_stop(struct ata_host *host)
-{
- struct piix_host_priv *hpriv = host->private_data;
-
- ata_host_stop(host);
- kfree(hpriv);
+ pci_set_master(pdev);
+ return ata_pci_sff_activate_host(host, ata_sff_interrupt, &piix_sht);
}
static int __init piix_init(void)
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff