*
* Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
+ * Copyright (C) 2003 Red Hat Inc
*
*
* This program is free software; you can redistribute it and/or modify
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
ICH5_PMR = 0x90, /* port mapping register */
ICH5_PCS = 0x92, /* port control and status */
- PIIX_SCC = 0x0A, /* sub-class code register */
PIIX_SIDPR_BAR = 5,
PIIX_SIDPR_LEN = 16,
PIIX_SIDPR_IDX = 0,
PIIX_SIDPR_DATA = 4,
- PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */
PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */
PIIX_FLAG_SIDPR = (1 << 29), /* SATA idx/data pair regs */
ich_pata_100, /* ICH up to UDMA 100 */
ich5_sata,
ich6_sata,
- ich6_sata_ahci,
- ich6m_sata_ahci,
- ich8_sata_ahci,
+ ich6m_sata,
+ ich8_sata,
ich8_2port_sata,
- ich8m_apple_sata_ahci, /* locks up on second port enable */
- tolapai_sata_ahci,
+ ich8m_apple_sata, /* locks up on second port enable */
+ tolapai_sata,
piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */
};
static int piix_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent);
-static void piix_pata_error_handler(struct ata_port *ap);
+static int piix_pata_prereset(struct ata_link *link, unsigned long deadline);
static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev);
static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev);
static int ich_pata_cable_detect(struct ata_port *ap);
static u8 piix_vmw_bmdma_status(struct ata_port *ap);
-static int piix_sidpr_scr_read(struct ata_port *ap, unsigned int reg, u32 *val);
-static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val);
-static void piix_sidpr_error_handler(struct ata_port *ap);
+static int piix_sidpr_scr_read(struct ata_link *link,
+ unsigned int reg, u32 *val);
+static int piix_sidpr_scr_write(struct ata_link *link,
+ unsigned int reg, u32 val);
#ifdef CONFIG_PM
static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
static int piix_pci_device_resume(struct pci_dev *pdev);
/* 82801FB/FW (ICH6/ICH6W) */
{ 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
/* 82801FR/FRW (ICH6R/ICH6RW) */
- { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
- /* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented) */
- { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
+ { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
+ /* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented).
+ * Attach iff the controller is in IDE mode. */
+ { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE << 8, 0xffff00, ich6m_sata },
/* 82801GB/GR/GH (ICH7, identical to ICH6) */
- { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
/* 2801GBM/GHM (ICH7M, identical to ICH6M) */
- { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
+ { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata },
/* Enterprise Southbridge 2 (631xESB/632xESB) */
- { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
/* SATA Controller 1 IDE (ICH8) */
- { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller 2 IDE (ICH8) */
{ 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
- /* Mobile SATA Controller IDE (ICH8M) */
- { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* Mobile SATA Controller IDE (ICH8M), Apple */
- { 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata_ahci },
+ { 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata },
+ { 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata },
+ { 0x8086, 0x2828, 0x106b, 0x00a3, 0, 0, ich8m_apple_sata },
+ /* Mobile SATA Controller IDE (ICH8M) */
+ { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH9) */
- { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH9) */
{ 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH9) */
/* SATA Controller IDE (ICH9M) */
{ 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH9M) */
- { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (Tolapai) */
- { 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, tolapai_sata_ahci },
+ { 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, tolapai_sata },
/* SATA Controller IDE (ICH10) */
- { 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH10) */
{ 0x8086, 0x3a06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH10) */
- { 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH10) */
{ 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
-
+ /* SATA Controller IDE (PCH) */
+ { 0x8086, 0x3b20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ /* SATA Controller IDE (PCH) */
+ { 0x8086, 0x3b21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (PCH) */
+ { 0x8086, 0x3b26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (PCH) */
+ { 0x8086, 0x3b28, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ /* SATA Controller IDE (PCH) */
+ { 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (PCH) */
+ { 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
{ } /* terminate list */
};
.cable_detect = ata_cable_40wire,
.set_piomode = piix_set_piomode,
.set_dmamode = piix_set_dmamode,
- .error_handler = piix_pata_error_handler,
+ .prereset = piix_pata_prereset,
};
static struct ata_port_operations piix_vmw_ops = {
static struct ata_port_operations piix_sidpr_sata_ops = {
.inherits = &piix_sata_ops,
+ .hardreset = sata_std_hardreset,
.scr_read = piix_sidpr_scr_read,
.scr_write = piix_sidpr_scr_write,
- .error_handler = piix_sidpr_error_handler,
};
static const struct piix_map_db ich5_map_db = {
static const struct piix_map_db *piix_map_db_table[] = {
[ich5_sata] = &ich5_map_db,
[ich6_sata] = &ich6_map_db,
- [ich6_sata_ahci] = &ich6_map_db,
- [ich6m_sata_ahci] = &ich6m_map_db,
- [ich8_sata_ahci] = &ich8_map_db,
+ [ich6m_sata] = &ich6m_map_db,
+ [ich8_sata] = &ich8_map_db,
[ich8_2port_sata] = &ich8_2port_map_db,
- [ich8m_apple_sata_ahci] = &ich8m_apple_map_db,
- [tolapai_sata_ahci] = &tolapai_map_db,
+ [ich8m_apple_sata] = &ich8m_apple_map_db,
+ [tolapai_sata] = &tolapai_map_db,
};
static struct ata_port_info piix_port_info[] = {
.port_ops = &piix_sata_ops,
},
- [ich6_sata_ahci] =
+ [ich6m_sata] =
{
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
- .pio_mask = 0x1f, /* pio0-4 */
- .mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = ATA_UDMA6,
- .port_ops = &piix_sata_ops,
- },
-
- [ich6m_sata_ahci] =
- {
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
+ .flags = PIIX_SATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
.port_ops = &piix_sata_ops,
},
- [ich8_sata_ahci] =
+ [ich8_sata] =
{
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI |
- PIIX_FLAG_SIDPR,
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
[ich8_2port_sata] =
{
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI |
- PIIX_FLAG_SIDPR,
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
.port_ops = &piix_sata_ops,
},
- [tolapai_sata_ahci] =
+ [tolapai_sata] =
{
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
+ .flags = PIIX_SATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
.port_ops = &piix_sata_ops,
},
- [ich8m_apple_sata_ahci] =
+ [ich8m_apple_sata] =
{
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI |
- PIIX_FLAG_SIDPR,
+ .flags = PIIX_SATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
{ 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */
{ 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
{ 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
+ { 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */
{ 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */
+ { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */
+ { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */
+ { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
/* end marker */
{ 0, }
};
if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
-}
-
-static void piix_pata_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, piix_pata_prereset, ata_std_softreset, NULL,
- ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
/**
* do_pata_set_dmamode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
* @adev: Drive in question
- * @udma: udma mode, 0 - 6
* @isich: set if the chip is an ICH device
*
* Set UDMA mode for device, in host controller PCI config space.
* Serial ATA Index/Data Pair Superset Registers access
*
* Beginning from ICH8, there's a sane way to access SCRs using index
- * and data register pair located at BAR5. This creates an
- * interesting problem of mapping two SCRs to one port.
- *
- * Although they have separate SCRs, the master and slave aren't
- * independent enough to be treated as separate links - e.g. softreset
- * resets both. Also, there's no protocol defined for hard resetting
- * singled device sharing the virtual port (no defined way to acquire
- * device signature). This is worked around by merging the SCR values
- * into one sensible value and requesting follow-up SRST after
- * hardreset.
- *
- * SCR merging is perfomed in nibbles which is the unit contents in
- * SCRs are organized. If two values are equal, the value is used.
- * When they differ, merge table which lists precedence of possible
- * values is consulted and the first match or the last entry when
- * nothing matches is used. When there's no merge table for the
- * specific nibble, value from the first port is used.
+ * and data register pair located at BAR5 which means that we have
+ * separate SCRs for master and slave. This is handled using libata
+ * slave_link facility.
*/
static const int piix_sidx_map[] = {
[SCR_STATUS] = 0,
[SCR_CONTROL] = 1,
};
-static void piix_sidpr_sel(struct ata_device *dev, unsigned int reg)
+static void piix_sidpr_sel(struct ata_link *link, unsigned int reg)
{
- struct ata_port *ap = dev->link->ap;
+ struct ata_port *ap = link->ap;
struct piix_host_priv *hpriv = ap->host->private_data;
- iowrite32(((ap->port_no * 2 + dev->devno) << 8) | piix_sidx_map[reg],
+ iowrite32(((ap->port_no * 2 + link->pmp) << 8) | piix_sidx_map[reg],
hpriv->sidpr + PIIX_SIDPR_IDX);
}
-static int piix_sidpr_read(struct ata_device *dev, unsigned int reg)
-{
- struct piix_host_priv *hpriv = dev->link->ap->host->private_data;
-
- piix_sidpr_sel(dev, reg);
- return ioread32(hpriv->sidpr + PIIX_SIDPR_DATA);
-}
-
-static void piix_sidpr_write(struct ata_device *dev, unsigned int reg, u32 val)
-{
- struct piix_host_priv *hpriv = dev->link->ap->host->private_data;
-
- piix_sidpr_sel(dev, reg);
- iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA);
-}
-
-static u32 piix_merge_scr(u32 val0, u32 val1, const int * const *merge_tbl)
+static int piix_sidpr_scr_read(struct ata_link *link,
+ unsigned int reg, u32 *val)
{
- u32 val = 0;
- int i, mi;
-
- for (i = 0, mi = 0; i < 32 / 4; i++) {
- u8 c0 = (val0 >> (i * 4)) & 0xf;
- u8 c1 = (val1 >> (i * 4)) & 0xf;
- u8 merged = c0;
- const int *cur;
-
- /* if no merge preference, assume the first value */
- cur = merge_tbl[mi];
- if (!cur)
- goto done;
- mi++;
-
- /* if two values equal, use it */
- if (c0 == c1)
- goto done;
-
- /* choose the first match or the last from the merge table */
- while (*cur != -1) {
- if (c0 == *cur || c1 == *cur)
- break;
- cur++;
- }
- if (*cur == -1)
- cur--;
- merged = *cur;
- done:
- val |= merged << (i * 4);
- }
-
- return val;
-}
-
-static int piix_sidpr_scr_read(struct ata_port *ap, unsigned int reg, u32 *val)
-{
- const int * const sstatus_merge_tbl[] = {
- /* DET */ (const int []){ 1, 3, 0, 4, 3, -1 },
- /* SPD */ (const int []){ 2, 1, 0, -1 },
- /* IPM */ (const int []){ 6, 2, 1, 0, -1 },
- NULL,
- };
- const int * const scontrol_merge_tbl[] = {
- /* DET */ (const int []){ 1, 0, 4, 0, -1 },
- /* SPD */ (const int []){ 0, 2, 1, 0, -1 },
- /* IPM */ (const int []){ 0, 1, 2, 3, 0, -1 },
- NULL,
- };
- u32 v0, v1;
+ struct piix_host_priv *hpriv = link->ap->host->private_data;
if (reg >= ARRAY_SIZE(piix_sidx_map))
return -EINVAL;
- if (!(ap->flags & ATA_FLAG_SLAVE_POSS)) {
- *val = piix_sidpr_read(&ap->link.device[0], reg);
- return 0;
- }
-
- v0 = piix_sidpr_read(&ap->link.device[0], reg);
- v1 = piix_sidpr_read(&ap->link.device[1], reg);
-
- switch (reg) {
- case SCR_STATUS:
- *val = piix_merge_scr(v0, v1, sstatus_merge_tbl);
- break;
- case SCR_ERROR:
- *val = v0 | v1;
- break;
- case SCR_CONTROL:
- *val = piix_merge_scr(v0, v1, scontrol_merge_tbl);
- break;
- }
-
+ piix_sidpr_sel(link, reg);
+ *val = ioread32(hpriv->sidpr + PIIX_SIDPR_DATA);
return 0;
}
-static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val)
+static int piix_sidpr_scr_write(struct ata_link *link,
+ unsigned int reg, u32 val)
{
+ struct piix_host_priv *hpriv = link->ap->host->private_data;
+
if (reg >= ARRAY_SIZE(piix_sidx_map))
return -EINVAL;
- piix_sidpr_write(&ap->link.device[0], reg, val);
-
- if (ap->flags & ATA_FLAG_SLAVE_POSS)
- piix_sidpr_write(&ap->link.device[1], reg, val);
-
+ piix_sidpr_sel(link, reg);
+ iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA);
return 0;
}
-static int piix_sidpr_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
- int rc;
-
- /* do hardreset */
- rc = sata_link_hardreset(link, timing, deadline);
- if (rc) {
- ata_link_printk(link, KERN_ERR,
- "COMRESET failed (errno=%d)\n", rc);
- return rc;
- }
-
- /* TODO: phy layer with polling, timeouts, etc. */
- if (ata_link_offline(link)) {
- *class = ATA_DEV_NONE;
- return 0;
- }
-
- return -EAGAIN;
-}
-
-static void piix_sidpr_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
- piix_sidpr_hardreset, ata_std_postreset);
-}
-
#ifdef CONFIG_PM
static int piix_broken_suspend(void)
{
},
},
{
+ .ident = "TECRA M4",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M4"),
+ },
+ },
+ {
.ident = "TECRA M5",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
if (dmi_find_device(DMI_DEV_TYPE_OEM_STRING, oemstrs[i], NULL))
return 1;
+ /* TECRA M4 sometimes forgets its identify and reports bogus
+ * DMI information. As the bogus information is a bit
+ * generic, match as many entries as possible. This manual
+ * matching is necessary because dmi_system_id.matches is
+ * limited to four entries.
+ */
+ if (dmi_match(DMI_SYS_VENDOR, "TOSHIBA") &&
+ dmi_match(DMI_PRODUCT_NAME, "000000") &&
+ dmi_match(DMI_PRODUCT_VERSION, "000000") &&
+ dmi_match(DMI_PRODUCT_SERIAL, "000000") &&
+ dmi_match(DMI_BOARD_VENDOR, "TOSHIBA") &&
+ dmi_match(DMI_BOARD_NAME, "Portable PC") &&
+ dmi_match(DMI_BOARD_VERSION, "Version A0"))
+ return 1;
+
return 0;
}
return map;
}
-static void __devinit piix_init_sidpr(struct ata_host *host)
+static int __devinit piix_init_sidpr(struct ata_host *host)
{
struct pci_dev *pdev = to_pci_dev(host->dev);
struct piix_host_priv *hpriv = host->private_data;
- int i;
+ struct ata_link *link0 = &host->ports[0]->link;
+ u32 scontrol;
+ int i, rc;
/* check for availability */
for (i = 0; i < 4; i++)
if (hpriv->map[i] == IDE)
- return;
+ return 0;
if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR))
- return;
+ return 0;
if (pci_resource_start(pdev, PIIX_SIDPR_BAR) == 0 ||
pci_resource_len(pdev, PIIX_SIDPR_BAR) != PIIX_SIDPR_LEN)
- return;
+ return 0;
if (pcim_iomap_regions(pdev, 1 << PIIX_SIDPR_BAR, DRV_NAME))
- return;
+ return 0;
hpriv->sidpr = pcim_iomap_table(pdev)[PIIX_SIDPR_BAR];
- host->ports[0]->ops = &piix_sidpr_sata_ops;
- host->ports[1]->ops = &piix_sidpr_sata_ops;
+
+ /* SCR access via SIDPR doesn't work on some configurations.
+ * Give it a test drive by inhibiting power save modes which
+ * we'll do anyway.
+ */
+ piix_sidpr_scr_read(link0, SCR_CONTROL, &scontrol);
+
+ /* if IPM is already 3, SCR access is probably working. Don't
+ * un-inhibit power save modes as BIOS might have inhibited
+ * them for a reason.
+ */
+ if ((scontrol & 0xf00) != 0x300) {
+ scontrol |= 0x300;
+ piix_sidpr_scr_write(link0, SCR_CONTROL, scontrol);
+ piix_sidpr_scr_read(link0, SCR_CONTROL, &scontrol);
+
+ if ((scontrol & 0xf00) != 0x300) {
+ dev_printk(KERN_INFO, host->dev, "SCR access via "
+ "SIDPR is available but doesn't work\n");
+ return 0;
+ }
+ }
+
+ /* okay, SCRs available, set ops and ask libata for slave_link */
+ for (i = 0; i < 2; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ ap->ops = &piix_sidpr_sata_ops;
+
+ if (ap->flags & ATA_FLAG_SLAVE_POSS) {
+ rc = ata_slave_link_init(ap);
+ if (rc)
+ return rc;
+ }
+ }
+
+ return 0;
}
static void piix_iocfg_bit18_quirk(struct pci_dev *pdev)
if (rc)
return rc;
+ /* ICH6R may be driven by either ata_piix or ahci driver
+ * regardless of BIOS configuration. Make sure AHCI mode is
+ * off.
+ */
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) {
+ rc = piix_disable_ahci(pdev);
+ if (rc)
+ return rc;
+ }
+
/* SATA map init can change port_info, do it before prepping host */
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
hpriv->map = piix_init_sata_map(pdev, port_info,
piix_map_db_table[ent->driver_data]);
- rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
host->private_data = hpriv;
/* initialize controller */
- if (port_flags & PIIX_FLAG_AHCI) {
- u8 tmp;
- pci_read_config_byte(pdev, PIIX_SCC, &tmp);
- if (tmp == PIIX_AHCI_DEVICE) {
- rc = piix_disable_ahci(pdev);
- if (rc)
- return rc;
- }
- }
-
if (port_flags & ATA_FLAG_SATA) {
piix_init_pcs(host, piix_map_db_table[ent->driver_data]);
- piix_init_sidpr(host);
+ rc = piix_init_sidpr(host);
+ if (rc)
+ return rc;
}
/* apply IOCFG bit18 quirk */
}
pci_set_master(pdev);
- return ata_pci_activate_sff_host(host, ata_interrupt, &piix_sht);
+ return ata_pci_sff_activate_host(host, ata_sff_interrupt, &piix_sht);
}
static int __init piix_init(void)