static int brightness_switch_enabled = 1;
module_param(brightness_switch_enabled, bool, 0644);
+static int register_count = 0;
static int acpi_video_bus_add(struct acpi_device *device);
static int acpi_video_bus_remove(struct acpi_device *device, int type);
static int acpi_video_resume(struct acpi_device *device);
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"),
},
},
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "Acer Aspire 5710Z",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710Z"),
+ },
+ },
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "eMachines E510",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "EMACHINES"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "eMachines E510"),
+ },
+ },
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "Acer Aspire 5315",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
+ },
+ },
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "Acer Aspire 7720",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720"),
+ },
+ },
{}
};
* In this case, the first two elements in _BCL packages
* are also supported brightness levels that OS should take care of.
*/
- for (i = 2; i < count; i++)
- if (br->levels[i] == br->levels[0] ||
- br->levels[i] == br->levels[1])
+ for (i = 2; i < count; i++) {
+ if (br->levels[i] == br->levels[0])
+ level_ac_battery++;
+ if (br->levels[i] == br->levels[1])
level_ac_battery++;
+ }
if (level_ac_battery < 2) {
level_ac_battery = 2 - level_ac_battery;
br->flags._BCM_use_index = br->flags._BCL_use_index;
/* _BQC uses INDEX while _BCL uses VALUE in some laptops */
- br->curr = max_level;
+ br->curr = level_old = max_level;
+
+ if (!device->cap._BQC)
+ goto set_level;
+
result = acpi_video_device_lcd_get_level_current(device, &level_old);
if (result)
goto out_free_levels;
- result = acpi_video_device_lcd_set_level(device, br->curr);
+ /*
+ * Set the level to maximum and check if _BQC uses indexed value
+ */
+ result = acpi_video_device_lcd_set_level(device, max_level);
if (result)
goto out_free_levels;
if (result)
goto out_free_levels;
- if ((level != level_old) && !br->flags._BCM_use_index) {
- /* Note:
- * This piece of code does not work correctly if the current
- * brightness levels is 0.
- * But I guess boxes that boot with such a dark screen are rare
- * and no more code is needed to cover this specifial case.
- */
+ br->flags._BQC_use_index = (level == max_level ? 0 : 1);
- if (level_ac_battery != 2) {
- /*
- * For now, we don't support the _BCL like this:
- * 16, 15, 0, 1, 2, 3, ..., 14, 15, 16
- * because we may mess up the index returned by _BQC.
- * Plus: we have not got a box like this.
- */
- ACPI_ERROR((AE_INFO, "_BCL not supported\n"));
- }
- br->flags._BQC_use_index = 1;
- }
+ if (!br->flags._BQC_use_index)
+ goto set_level;
+
+ if (br->flags._BCL_reversed)
+ level_old = (br->count - 1) - level_old;
+ level_old = br->levels[level_old];
+
+set_level:
+ result = acpi_video_device_lcd_set_level(device, level_old);
+ if (result)
+ goto out_free_levels;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"found %d brightness levels\n", count - 2));
device->backlight->props.max_brightness = device->brightness->count-3;
kfree(name);
+ result = sysfs_create_link(&device->backlight->dev.kobj,
+ &device->dev->dev.kobj, "device");
+ if (result)
+ printk(KERN_ERR PREFIX "Create sysfs link\n");
+
device->cdev = thermal_cooling_device_register("LCD",
device->dev, &video_cooling_ops);
if (IS_ERR(device->cdev))
static int acpi_video_bus_check(struct acpi_video_bus *video)
{
acpi_status status = -ENOENT;
- struct device *dev;
+ struct pci_dev *dev;
if (!video)
return -EINVAL;
- dev = acpi_get_physical_pci_device(video->device->handle);
+ dev = acpi_get_pci_dev(video->device->handle);
if (!dev)
return -ENODEV;
- put_device(dev);
+ pci_dev_put(dev);
/* Since there is no HID, CID and so on for VGA driver, we have
* to check well known required nodes.
status = acpi_remove_notify_handler(device->dev->handle,
ACPI_DEVICE_NOTIFY,
acpi_video_device_notify);
- backlight_device_unregister(device->backlight);
+ if (device->backlight) {
+ sysfs_remove_link(&device->backlight->dev.kobj, "device");
+ backlight_device_unregister(device->backlight);
+ device->backlight = NULL;
+ }
if (device->cdev) {
sysfs_remove_link(&device->dev->dev.kobj,
"thermal_cooling");
int acpi_video_register(void)
{
int result = 0;
+ if (register_count) {
+ /*
+ * if the function of acpi_video_register is already called,
+ * don't register the acpi_vide_bus again and return no error.
+ */
+ return 0;
+ }
acpi_video_dir = proc_mkdir(ACPI_VIDEO_CLASS, acpi_root_dir);
if (!acpi_video_dir)
return -ENODEV;
}
+ /*
+ * When the acpi_video_bus is loaded successfully, increase
+ * the counter reference.
+ */
+ register_count = 1;
+
return 0;
}
EXPORT_SYMBOL(acpi_video_register);
+void acpi_video_unregister(void)
+{
+ if (!register_count) {
+ /*
+ * If the acpi video bus is already unloaded, don't
+ * unload it again and return directly.
+ */
+ return;
+ }
+ acpi_bus_unregister_driver(&acpi_video_bus);
+
+ remove_proc_entry(ACPI_VIDEO_CLASS, acpi_root_dir);
+
+ register_count = 0;
+
+ return;
+}
+EXPORT_SYMBOL(acpi_video_unregister);
+
/*
* This is kind of nasty. Hardware using Intel chipsets may require
* the video opregion code to be run first in order to initialise
static void __exit acpi_video_exit(void)
{
-
- acpi_bus_unregister_driver(&acpi_video_bus);
-
- remove_proc_entry(ACPI_VIDEO_CLASS, acpi_root_dir);
+ acpi_video_unregister();
return;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff