#include <linux/module.h>
#include <linux/dmi.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/jiffies.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#define PREFIX "ACPI: "
+
#define ACPI_THERMAL_CLASS "thermal_zone"
#define ACPI_THERMAL_DEVICE_NAME "Thermal Zone"
#define ACPI_THERMAL_FILE_STATE "state"
static int acpi_thermal_add(struct acpi_device *device);
static int acpi_thermal_remove(struct acpi_device *device, int type);
static int acpi_thermal_resume(struct acpi_device *device);
+static void acpi_thermal_notify(struct acpi_device *device, u32 event);
static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file);
static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file);
static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file);
.add = acpi_thermal_add,
.remove = acpi_thermal_remove,
.resume = acpi_thermal_resume,
+ .notify = acpi_thermal_notify,
},
};
struct acpi_handle_list devices;
struct thermal_zone_device *thermal_zone;
int tz_enabled;
+ int kelvin_offset;
struct mutex lock;
};
int valid = 0;
int i;
- /* Critical Shutdown (required) */
+ /* Critical Shutdown */
if (flag & ACPI_TRIPS_CRITICAL) {
status = acpi_evaluate_integer(tz->device->handle,
"_CRT", NULL, &tmp);
/*
* Treat freezing temperatures as invalid as well; some
* BIOSes return really low values and cause reboots at startup.
- * Below zero (Celcius) values clearly aren't right for sure..
+ * Below zero (Celsius) values clearly aren't right for sure..
* ... so lets discard those as invalid.
*/
- if (ACPI_FAILURE(status) ||
- tz->trips.critical.temperature <= 2732) {
+ if (ACPI_FAILURE(status)) {
+ tz->trips.critical.flags.valid = 0;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "No critical threshold\n"));
+ } else if (tmp <= 2732) {
+ printk(KERN_WARNING FW_BUG "Invalid critical threshold "
+ "(%llu)\n", tmp);
tz->trips.critical.flags.valid = 0;
- ACPI_EXCEPTION((AE_INFO, status,
- "No or invalid critical threshold"));
- return -ENODEV;
} else {
tz->trips.critical.flags.valid = 1;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Found critical threshold [%lu]\n",
- tz->trips.critical.temperature));
+ "Found critical threshold [%lu]\n",
+ tz->trips.critical.temperature));
}
if (tz->trips.critical.flags.valid == 1) {
if (crt == -1) {
static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
{
- return acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
+ int i, valid, ret = acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
+
+ if (ret)
+ return ret;
+
+ valid = tz->trips.critical.flags.valid |
+ tz->trips.hot.flags.valid |
+ tz->trips.passive.flags.valid;
+
+ for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
+ valid |= tz->trips.active[i].flags.valid;
+
+ if (!valid) {
+ printk(KERN_WARNING FW_BUG "No valid trip found\n");
+ return -ENODEV;
+ }
+ return 0;
}
static void acpi_thermal_check(void *data)
}
/* sys I/F for generic thermal sysfs support */
-#define KELVIN_TO_MILLICELSIUS(t) (t * 100 - 273200)
+#define KELVIN_TO_MILLICELSIUS(t, off) (((t) - (off)) * 100)
static int thermal_get_temp(struct thermal_zone_device *thermal,
unsigned long *temp)
if (result)
return result;
- *temp = KELVIN_TO_MILLICELSIUS(tz->temperature);
+ *temp = KELVIN_TO_MILLICELSIUS(tz->temperature, tz->kelvin_offset);
return 0;
}
if (tz->trips.critical.flags.valid) {
if (!trip) {
*temp = KELVIN_TO_MILLICELSIUS(
- tz->trips.critical.temperature);
+ tz->trips.critical.temperature,
+ tz->kelvin_offset);
return 0;
}
trip--;
if (tz->trips.hot.flags.valid) {
if (!trip) {
*temp = KELVIN_TO_MILLICELSIUS(
- tz->trips.hot.temperature);
+ tz->trips.hot.temperature,
+ tz->kelvin_offset);
return 0;
}
trip--;
if (tz->trips.passive.flags.valid) {
if (!trip) {
*temp = KELVIN_TO_MILLICELSIUS(
- tz->trips.passive.temperature);
+ tz->trips.passive.temperature,
+ tz->kelvin_offset);
return 0;
}
trip--;
tz->trips.active[i].flags.valid; i++) {
if (!trip) {
*temp = KELVIN_TO_MILLICELSIUS(
- tz->trips.active[i].temperature);
+ tz->trips.active[i].temperature,
+ tz->kelvin_offset);
return 0;
}
trip--;
if (tz->trips.critical.flags.valid) {
*temperature = KELVIN_TO_MILLICELSIUS(
- tz->trips.critical.temperature);
+ tz->trips.critical.temperature,
+ tz->kelvin_offset);
return 0;
} else
return -EINVAL;
thermal_zone_device_register("acpitz", trips, tz,
&acpi_thermal_zone_ops,
0, 0, 0,
- tz->polling_frequency);
+ tz->polling_frequency*100);
if (IS_ERR(tz->thermal_zone))
return -ENODEV;
acpi_device_bid(device));
}
seq_puts(seq, "\n");
+ } else {
+ seq_printf(seq, "passive (forced):");
+ if (tz->thermal_zone->forced_passive)
+ seq_printf(seq, " %i C\n",
+ tz->thermal_zone->forced_passive / 1000);
+ else
+ seq_printf(seq, "<not set>\n");
}
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
acpi_thermal_dir);
if (!acpi_device_dir(device))
return -ENODEV;
- acpi_device_dir(device)->owner = THIS_MODULE;
}
/* 'state' [R] */
Driver Interface
-------------------------------------------------------------------------- */
-static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data)
+static void acpi_thermal_notify(struct acpi_device *device, u32 event)
{
- struct acpi_thermal *tz = data;
- struct acpi_device *device = NULL;
+ struct acpi_thermal *tz = acpi_driver_data(device);
if (!tz)
return;
- device = tz->device;
-
switch (event) {
case ACPI_THERMAL_NOTIFY_TEMPERATURE:
acpi_thermal_check(tz);
"Unsupported event [0x%x]\n", event));
break;
}
-
- return;
}
static int acpi_thermal_get_info(struct acpi_thermal *tz)
return 0;
}
+/*
+ * The exact offset between Kelvin and degree Celsius is 273.15. However ACPI
+ * handles temperature values with a single decimal place. As a consequence,
+ * some implementations use an offset of 273.1 and others use an offset of
+ * 273.2. Try to find out which one is being used, to present the most
+ * accurate and visually appealing number.
+ *
+ * The heuristic below should work for all ACPI thermal zones which have a
+ * critical trip point with a value being a multiple of 0.5 degree Celsius.
+ */
+static void acpi_thermal_guess_offset(struct acpi_thermal *tz)
+{
+ if (tz->trips.critical.flags.valid &&
+ (tz->trips.critical.temperature % 5) == 1)
+ tz->kelvin_offset = 2731;
+ else
+ tz->kelvin_offset = 2732;
+}
+
static int acpi_thermal_add(struct acpi_device *device)
{
int result = 0;
- acpi_status status = AE_OK;
struct acpi_thermal *tz = NULL;
if (result)
goto free_memory;
+ acpi_thermal_guess_offset(tz);
+
result = acpi_thermal_register_thermal_zone(tz);
if (result)
goto free_memory;
if (result)
goto unregister_thermal_zone;
- status = acpi_install_notify_handler(device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_thermal_notify, tz);
- if (ACPI_FAILURE(status)) {
- result = -ENODEV;
- goto remove_fs;
- }
-
printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n",
acpi_device_name(device), acpi_device_bid(device),
KELVIN_TO_CELSIUS(tz->temperature));
goto end;
-remove_fs:
- acpi_thermal_remove_fs(device);
unregister_thermal_zone:
thermal_zone_device_unregister(tz->thermal_zone);
free_memory:
static int acpi_thermal_remove(struct acpi_device *device, int type)
{
- acpi_status status = AE_OK;
struct acpi_thermal *tz = NULL;
if (!device || !acpi_driver_data(device))
tz = acpi_driver_data(device);
- status = acpi_remove_notify_handler(device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_thermal_notify);
-
acpi_thermal_remove_fs(device);
acpi_thermal_unregister_thermal_zone(tz);
mutex_destroy(&tz->lock);
acpi_thermal_dir = proc_mkdir(ACPI_THERMAL_CLASS, acpi_root_dir);
if (!acpi_thermal_dir)
return -ENODEV;
- acpi_thermal_dir->owner = THIS_MODULE;
result = acpi_bus_register_driver(&acpi_thermal_driver);
if (result < 0) {
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff