#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/dmi.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
-#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
#include <linux/kmod.h>
#include <linux/seq_file.h>
+#include <linux/reboot.h>
#include <asm/uaccess.h>
-
+#include <linux/thermal.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#define ACPI_THERMAL_COMPONENT 0x04000000
#define ACPI_THERMAL_CLASS "thermal_zone"
-#define ACPI_THERMAL_DRIVER_NAME "ACPI Thermal Zone Driver"
#define ACPI_THERMAL_DEVICE_NAME "Thermal Zone"
#define ACPI_THERMAL_FILE_STATE "state"
#define ACPI_THERMAL_FILE_TEMPERATURE "temperature"
#define ACPI_THERMAL_NOTIFY_CRITICAL 0xF0
#define ACPI_THERMAL_NOTIFY_HOT 0xF1
#define ACPI_THERMAL_MODE_ACTIVE 0x00
-#define ACPI_THERMAL_MODE_PASSIVE 0x01
-#define ACPI_THERMAL_MODE_CRITICAL 0xff
-#define ACPI_THERMAL_PATH_POWEROFF "/sbin/poweroff"
#define ACPI_THERMAL_MAX_ACTIVE 10
#define ACPI_THERMAL_MAX_LIMIT_STR_LEN 65
-#define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732>=0) ? ((long)t-2732+5)/10 : ((long)t-2732-5)/10)
-#define CELSIUS_TO_KELVIN(t) ((t+273)*10)
-
#define _COMPONENT ACPI_THERMAL_COMPONENT
ACPI_MODULE_NAME("thermal");
MODULE_AUTHOR("Paul Diefenbaugh");
-MODULE_DESCRIPTION(ACPI_THERMAL_DRIVER_NAME);
+MODULE_DESCRIPTION("ACPI Thermal Zone Driver");
MODULE_LICENSE("GPL");
+static int act;
+module_param(act, int, 0644);
+MODULE_PARM_DESC(act, "Disable or override all lowest active trip points.");
+
+static int crt;
+module_param(crt, int, 0644);
+MODULE_PARM_DESC(crt, "Disable or lower all critical trip points.");
+
static int tzp;
-module_param(tzp, int, 0);
-MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.\n");
+module_param(tzp, int, 0444);
+MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.");
+
+static int nocrt;
+module_param(nocrt, int, 0);
+MODULE_PARM_DESC(nocrt, "Set to take no action upon ACPI thermal zone critical trips points.");
+
+static int off;
+module_param(off, int, 0);
+MODULE_PARM_DESC(off, "Set to disable ACPI thermal support.");
+
+static int psv;
+module_param(psv, int, 0644);
+MODULE_PARM_DESC(psv, "Disable or override all passive trip points.");
static int acpi_thermal_add(struct acpi_device *device);
static int acpi_thermal_remove(struct acpi_device *device, int type);
static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file);
static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file);
static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file);
-static ssize_t acpi_thermal_write_trip_points(struct file *,
- const char __user *, size_t,
- loff_t *);
static int acpi_thermal_cooling_open_fs(struct inode *inode, struct file *file);
static ssize_t acpi_thermal_write_cooling_mode(struct file *,
const char __user *, size_t,
static ssize_t acpi_thermal_write_polling(struct file *, const char __user *,
size_t, loff_t *);
+static const struct acpi_device_id thermal_device_ids[] = {
+ {ACPI_THERMAL_HID, 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, thermal_device_ids);
+
static struct acpi_driver acpi_thermal_driver = {
- .name = ACPI_THERMAL_DRIVER_NAME,
+ .name = "thermal",
.class = ACPI_THERMAL_CLASS,
- .ids = ACPI_THERMAL_HID,
+ .ids = thermal_device_ids,
.ops = {
.add = acpi_thermal_add,
.remove = acpi_thermal_remove,
unsigned long temperature;
unsigned long last_temperature;
unsigned long polling_frequency;
- u8 cooling_mode;
volatile u8 zombie;
struct acpi_thermal_flags flags;
struct acpi_thermal_state state;
struct acpi_thermal_trips trips;
struct acpi_handle_list devices;
struct timer_list timer;
+ struct thermal_zone_device *thermal_zone;
+ int tz_enabled;
+ struct mutex lock;
};
static const struct file_operations acpi_thermal_state_fops = {
+ .owner = THIS_MODULE,
.open = acpi_thermal_state_open_fs,
.read = seq_read,
.llseek = seq_lseek,
};
static const struct file_operations acpi_thermal_temp_fops = {
+ .owner = THIS_MODULE,
.open = acpi_thermal_temp_open_fs,
.read = seq_read,
.llseek = seq_lseek,
};
static const struct file_operations acpi_thermal_trip_fops = {
+ .owner = THIS_MODULE,
.open = acpi_thermal_trip_open_fs,
.read = seq_read,
- .write = acpi_thermal_write_trip_points,
.llseek = seq_lseek,
.release = single_release,
};
static const struct file_operations acpi_thermal_cooling_fops = {
+ .owner = THIS_MODULE,
.open = acpi_thermal_cooling_open_fs,
.read = seq_read,
.write = acpi_thermal_write_cooling_mode,
};
static const struct file_operations acpi_thermal_polling_fops = {
+ .owner = THIS_MODULE,
.open = acpi_thermal_polling_open_fs,
.read = seq_read,
.write = acpi_thermal_write_polling,
static int acpi_thermal_get_temperature(struct acpi_thermal *tz)
{
acpi_status status = AE_OK;
-
+ unsigned long long tmp;
if (!tz)
return -EINVAL;
tz->last_temperature = tz->temperature;
- status =
- acpi_evaluate_integer(tz->device->handle, "_TMP", NULL, &tz->temperature);
+ status = acpi_evaluate_integer(tz->device->handle, "_TMP", NULL, &tmp);
if (ACPI_FAILURE(status))
return -ENODEV;
+ tz->temperature = tmp;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Temperature is %lu dK\n",
tz->temperature));
static int acpi_thermal_get_polling_frequency(struct acpi_thermal *tz)
{
acpi_status status = AE_OK;
-
+ unsigned long long tmp;
if (!tz)
return -EINVAL;
- status =
- acpi_evaluate_integer(tz->device->handle, "_TZP", NULL,
- &tz->polling_frequency);
+ status = acpi_evaluate_integer(tz->device->handle, "_TZP", NULL, &tmp);
if (ACPI_FAILURE(status))
return -ENODEV;
+ tz->polling_frequency = tmp;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Polling frequency is %lu dS\n",
tz->polling_frequency));
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Polling frequency set to %lu seconds\n",
- tz->polling_frequency));
+ tz->polling_frequency/10));
return 0;
}
if (ACPI_FAILURE(status))
return -ENODEV;
- tz->cooling_mode = mode;
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Cooling mode [%s]\n",
- mode ? "passive" : "active"));
-
return 0;
}
-static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
-{
- acpi_status status = AE_OK;
- int i = 0;
+#define ACPI_TRIPS_CRITICAL 0x01
+#define ACPI_TRIPS_HOT 0x02
+#define ACPI_TRIPS_PASSIVE 0x04
+#define ACPI_TRIPS_ACTIVE 0x08
+#define ACPI_TRIPS_DEVICES 0x10
+#define ACPI_TRIPS_REFRESH_THRESHOLDS (ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE)
+#define ACPI_TRIPS_REFRESH_DEVICES ACPI_TRIPS_DEVICES
- if (!tz)
- return -EINVAL;
+#define ACPI_TRIPS_INIT (ACPI_TRIPS_CRITICAL | ACPI_TRIPS_HOT | \
+ ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE | \
+ ACPI_TRIPS_DEVICES)
- /* Critical Shutdown (required) */
+/*
+ * This exception is thrown out in two cases:
+ * 1.An invalid trip point becomes invalid or a valid trip point becomes invalid
+ * when re-evaluating the AML code.
+ * 2.TODO: Devices listed in _PSL, _ALx, _TZD may change.
+ * We need to re-bind the cooling devices of a thermal zone when this occurs.
+ */
+#define ACPI_THERMAL_TRIPS_EXCEPTION(flags, str) \
+do { \
+ if (flags != ACPI_TRIPS_INIT) \
+ ACPI_EXCEPTION((AE_INFO, AE_ERROR, \
+ "ACPI thermal trip point %s changed\n" \
+ "Please send acpidump to linux-acpi@vger.kernel.org\n", str)); \
+} while (0)
+
+static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
+{
+ acpi_status status = AE_OK;
+ unsigned long long tmp;
+ struct acpi_handle_list devices;
+ int valid = 0;
+ int i;
- status = acpi_evaluate_integer(tz->device->handle, "_CRT", NULL,
- &tz->trips.critical.temperature);
- if (ACPI_FAILURE(status)) {
- tz->trips.critical.flags.valid = 0;
- ACPI_EXCEPTION((AE_INFO, status, "No critical threshold"));
- return -ENODEV;
- } else {
- tz->trips.critical.flags.valid = 1;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Found critical threshold [%lu]\n",
- tz->trips.critical.temperature));
+ /* Critical Shutdown (required) */
+ if (flag & ACPI_TRIPS_CRITICAL) {
+ status = acpi_evaluate_integer(tz->device->handle,
+ "_CRT", NULL, &tmp);
+ tz->trips.critical.temperature = tmp;
+ /*
+ * Treat freezing temperatures as invalid as well; some
+ * BIOSes return really low values and cause reboots at startup.
+ * Below zero (Celcius) values clearly aren't right for sure..
+ * ... so lets discard those as invalid.
+ */
+ if (ACPI_FAILURE(status) ||
+ tz->trips.critical.temperature <= 2732) {
+ tz->trips.critical.flags.valid = 0;
+ ACPI_EXCEPTION((AE_INFO, status,
+ "No or invalid critical threshold"));
+ return -ENODEV;
+ } else {
+ tz->trips.critical.flags.valid = 1;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Found critical threshold [%lu]\n",
+ tz->trips.critical.temperature));
+ }
+ if (tz->trips.critical.flags.valid == 1) {
+ if (crt == -1) {
+ tz->trips.critical.flags.valid = 0;
+ } else if (crt > 0) {
+ unsigned long crt_k = CELSIUS_TO_KELVIN(crt);
+ /*
+ * Allow override critical threshold
+ */
+ if (crt_k > tz->trips.critical.temperature)
+ printk(KERN_WARNING PREFIX
+ "Critical threshold %d C\n", crt);
+ tz->trips.critical.temperature = crt_k;
+ }
+ }
}
/* Critical Sleep (optional) */
-
- status =
- acpi_evaluate_integer(tz->device->handle, "_HOT", NULL,
- &tz->trips.hot.temperature);
- if (ACPI_FAILURE(status)) {
- tz->trips.hot.flags.valid = 0;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No hot threshold\n"));
- } else {
- tz->trips.hot.flags.valid = 1;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found hot threshold [%lu]\n",
- tz->trips.hot.temperature));
+ if (flag & ACPI_TRIPS_HOT) {
+ status = acpi_evaluate_integer(tz->device->handle,
+ "_HOT", NULL, &tmp);
+ if (ACPI_FAILURE(status)) {
+ tz->trips.hot.flags.valid = 0;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "No hot threshold\n"));
+ } else {
+ tz->trips.hot.temperature = tmp;
+ tz->trips.hot.flags.valid = 1;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Found hot threshold [%lu]\n",
+ tz->trips.critical.temperature));
+ }
}
- /* Passive: Processors (optional) */
-
- status =
- acpi_evaluate_integer(tz->device->handle, "_PSV", NULL,
- &tz->trips.passive.temperature);
- if (ACPI_FAILURE(status)) {
- tz->trips.passive.flags.valid = 0;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No passive threshold\n"));
- } else {
- tz->trips.passive.flags.valid = 1;
-
- status =
- acpi_evaluate_integer(tz->device->handle, "_TC1", NULL,
- &tz->trips.passive.tc1);
- if (ACPI_FAILURE(status))
- tz->trips.passive.flags.valid = 0;
-
- status =
- acpi_evaluate_integer(tz->device->handle, "_TC2", NULL,
- &tz->trips.passive.tc2);
- if (ACPI_FAILURE(status))
- tz->trips.passive.flags.valid = 0;
+ /* Passive (optional) */
+ if (((flag & ACPI_TRIPS_PASSIVE) && tz->trips.passive.flags.valid) ||
+ (flag == ACPI_TRIPS_INIT)) {
+ valid = tz->trips.passive.flags.valid;
+ if (psv == -1) {
+ status = AE_SUPPORT;
+ } else if (psv > 0) {
+ tmp = CELSIUS_TO_KELVIN(psv);
+ status = AE_OK;
+ } else {
+ status = acpi_evaluate_integer(tz->device->handle,
+ "_PSV", NULL, &tmp);
+ }
- status =
- acpi_evaluate_integer(tz->device->handle, "_TSP", NULL,
- &tz->trips.passive.tsp);
if (ACPI_FAILURE(status))
tz->trips.passive.flags.valid = 0;
-
- status =
- acpi_evaluate_reference(tz->device->handle, "_PSL", NULL,
- &tz->trips.passive.devices);
- if (ACPI_FAILURE(status))
+ else {
+ tz->trips.passive.temperature = tmp;
+ tz->trips.passive.flags.valid = 1;
+ if (flag == ACPI_TRIPS_INIT) {
+ status = acpi_evaluate_integer(
+ tz->device->handle, "_TC1",
+ NULL, &tmp);
+ if (ACPI_FAILURE(status))
+ tz->trips.passive.flags.valid = 0;
+ else
+ tz->trips.passive.tc1 = tmp;
+ status = acpi_evaluate_integer(
+ tz->device->handle, "_TC2",
+ NULL, &tmp);
+ if (ACPI_FAILURE(status))
+ tz->trips.passive.flags.valid = 0;
+ else
+ tz->trips.passive.tc2 = tmp;
+ status = acpi_evaluate_integer(
+ tz->device->handle, "_TSP",
+ NULL, &tmp);
+ if (ACPI_FAILURE(status))
+ tz->trips.passive.flags.valid = 0;
+ else
+ tz->trips.passive.tsp = tmp;
+ }
+ }
+ }
+ if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.passive.flags.valid) {
+ memset(&devices, 0, sizeof(struct acpi_handle_list));
+ status = acpi_evaluate_reference(tz->device->handle, "_PSL",
+ NULL, &devices);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_WARNING PREFIX
+ "Invalid passive threshold\n");
tz->trips.passive.flags.valid = 0;
-
- if (!tz->trips.passive.flags.valid)
- printk(KERN_WARNING PREFIX "Invalid passive threshold\n");
+ }
else
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Found passive threshold [%lu]\n",
- tz->trips.passive.temperature));
- }
+ tz->trips.passive.flags.valid = 1;
- /* Active: Fans, etc. (optional) */
+ if (memcmp(&tz->trips.passive.devices, &devices,
+ sizeof(struct acpi_handle_list))) {
+ memcpy(&tz->trips.passive.devices, &devices,
+ sizeof(struct acpi_handle_list));
+ ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
+ }
+ }
+ if ((flag & ACPI_TRIPS_PASSIVE) || (flag & ACPI_TRIPS_DEVICES)) {
+ if (valid != tz->trips.passive.flags.valid)
+ ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state");
+ }
+ /* Active (optional) */
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
-
char name[5] = { '_', 'A', 'C', ('0' + i), '\0' };
-
- status =
- acpi_evaluate_integer(tz->device->handle, name, NULL,
- &tz->trips.active[i].temperature);
- if (ACPI_FAILURE(status))
- break;
+ valid = tz->trips.active[i].flags.valid;
+
+ if (act == -1)
+ break; /* disable all active trip points */
+
+ if ((flag == ACPI_TRIPS_INIT) || ((flag & ACPI_TRIPS_ACTIVE) &&
+ tz->trips.active[i].flags.valid)) {
+ status = acpi_evaluate_integer(tz->device->handle,
+ name, NULL, &tmp);
+ if (ACPI_FAILURE(status)) {
+ tz->trips.active[i].flags.valid = 0;
+ if (i == 0)
+ break;
+ if (act <= 0)
+ break;
+ if (i == 1)
+ tz->trips.active[0].temperature =
+ CELSIUS_TO_KELVIN(act);
+ else
+ /*
+ * Don't allow override higher than
+ * the next higher trip point
+ */
+ tz->trips.active[i - 1].temperature =
+ (tz->trips.active[i - 2].temperature <
+ CELSIUS_TO_KELVIN(act) ?
+ tz->trips.active[i - 2].temperature :
+ CELSIUS_TO_KELVIN(act));
+ break;
+ } else {
+ tz->trips.active[i].temperature = tmp;
+ tz->trips.active[i].flags.valid = 1;
+ }
+ }
name[2] = 'L';
- status =
- acpi_evaluate_reference(tz->device->handle, name, NULL,
- &tz->trips.active[i].devices);
- if (ACPI_SUCCESS(status)) {
- tz->trips.active[i].flags.valid = 1;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Found active threshold [%d]:[%lu]\n",
- i, tz->trips.active[i].temperature));
- } else
- ACPI_EXCEPTION((AE_INFO, status,
- "Invalid active threshold [%d]", i));
- }
-
- return 0;
-}
-
-static int acpi_thermal_get_devices(struct acpi_thermal *tz)
-{
- acpi_status status = AE_OK;
+ if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.active[i].flags.valid ) {
+ memset(&devices, 0, sizeof(struct acpi_handle_list));
+ status = acpi_evaluate_reference(tz->device->handle,
+ name, NULL, &devices);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_WARNING PREFIX
+ "Invalid active%d threshold\n", i);
+ tz->trips.active[i].flags.valid = 0;
+ }
+ else
+ tz->trips.active[i].flags.valid = 1;
+ if (memcmp(&tz->trips.active[i].devices, &devices,
+ sizeof(struct acpi_handle_list))) {
+ memcpy(&tz->trips.active[i].devices, &devices,
+ sizeof(struct acpi_handle_list));
+ ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
+ }
+ }
+ if ((flag & ACPI_TRIPS_ACTIVE) || (flag & ACPI_TRIPS_DEVICES))
+ if (valid != tz->trips.active[i].flags.valid)
+ ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state");
- if (!tz)
- return -EINVAL;
+ if (!tz->trips.active[i].flags.valid)
+ break;
+ }
- status =
- acpi_evaluate_reference(tz->device->handle, "_TZD", NULL, &tz->devices);
- if (ACPI_FAILURE(status))
- return -ENODEV;
+ if (flag & ACPI_TRIPS_DEVICES) {
+ memset(&devices, 0, sizeof(struct acpi_handle_list));
+ status = acpi_evaluate_reference(tz->device->handle, "_TZD",
+ NULL, &devices);
+ if (memcmp(&tz->devices, &devices,
+ sizeof(struct acpi_handle_list))) {
+ memcpy(&tz->devices, &devices,
+ sizeof(struct acpi_handle_list));
+ ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
+ }
+ }
return 0;
}
-static int acpi_thermal_call_usermode(char *path)
+static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
{
- char *argv[2] = { NULL, NULL };
- char *envp[3] = { NULL, NULL, NULL };
-
-
- if (!path)
- return -EINVAL;
-
- argv[0] = path;
-
- /* minimal command environment */
- envp[0] = "HOME=/";
- envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
-
- call_usermodehelper(argv[0], argv, envp, 0);
-
- return 0;
+ return acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
}
static int acpi_thermal_critical(struct acpi_thermal *tz)
} else if (tz->trips.critical.flags.enabled)
tz->trips.critical.flags.enabled = 0;
- printk(KERN_EMERG
- "Critical temperature reached (%ld C), shutting down.\n",
- KELVIN_TO_CELSIUS(tz->temperature));
- acpi_bus_generate_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL,
+ acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL,
tz->trips.critical.flags.enabled);
-
- acpi_thermal_call_usermode(ACPI_THERMAL_PATH_POWEROFF);
+ acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
+ dev_name(&tz->device->dev),
+ ACPI_THERMAL_NOTIFY_CRITICAL,
+ tz->trips.critical.flags.enabled);
+
+ /* take no action if nocrt is set */
+ if(!nocrt) {
+ printk(KERN_EMERG
+ "Critical temperature reached (%ld C), shutting down.\n",
+ KELVIN_TO_CELSIUS(tz->temperature));
+ orderly_poweroff(true);
+ }
return 0;
}
} else if (tz->trips.hot.flags.enabled)
tz->trips.hot.flags.enabled = 0;
- acpi_bus_generate_event(tz->device, ACPI_THERMAL_NOTIFY_HOT,
+ acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_HOT,
tz->trips.hot.flags.enabled);
+ acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
+ dev_name(&tz->device->dev),
+ ACPI_THERMAL_NOTIFY_HOT,
+ tz->trips.hot.flags.enabled);
- /* TBD: Call user-mode "sleep(S4)" function */
+ /* TBD: Call user-mode "sleep(S4)" function if nocrt is cleared */
return 0;
}
acpi_os_execute(OSL_GPE_HANDLER, acpi_thermal_check, (void *)data);
}
+static void acpi_thermal_active_off(void *data)
+{
+ int result = 0;
+ struct acpi_thermal *tz = data;
+ int i = 0;
+ int j = 0;
+ struct acpi_thermal_active *active = NULL;
+
+ if (!tz) {
+ printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
+ return;
+ }
+
+ result = acpi_thermal_get_temperature(tz);
+ if (result)
+ return;
+
+ for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+ active = &(tz->trips.active[i]);
+ if (!active || !active->flags.valid)
+ break;
+ if (tz->temperature >= active->temperature) {
+ /*
+ * If the thermal temperature is greater than the
+ * active threshod, unnecessary to turn off the
+ * the active cooling device.
+ */
+ continue;
+ }
+ /*
+ * Below Threshold?
+ * ----------------
+ * Turn OFF all cooling devices associated with this
+ * threshold.
+ */
+ for (j = 0; j < active->devices.count; j++)
+ result = acpi_bus_set_power(active->devices.handles[j],
+ ACPI_STATE_D3);
+ }
+}
+
static void acpi_thermal_check(void *data)
{
int result = 0;
struct acpi_thermal *tz = data;
unsigned long sleep_time = 0;
+ unsigned long timeout_jiffies = 0;
int i = 0;
struct acpi_thermal_state state;
return;
}
+ /* Check if someone else is already running */
+ if (!mutex_trylock(&tz->lock))
+ return;
+
state = tz->state;
result = acpi_thermal_get_temperature(tz);
if (result)
- return;
+ goto unlock;
+
+ if (!tz->tz_enabled)
+ goto unlock;
memset(&tz->state, 0, sizeof(tz->state));
* a thermal event occurs). Note that _TSP and _TZD values are
* given in 1/10th seconds (we must covert to milliseconds).
*/
- if (tz->state.passive)
+ if (tz->state.passive) {
sleep_time = tz->trips.passive.tsp * 100;
- else if (tz->polling_frequency > 0)
+ timeout_jiffies = jiffies + (HZ * sleep_time) / 1000;
+ } else if (tz->polling_frequency > 0) {
sleep_time = tz->polling_frequency * 100;
+ timeout_jiffies = round_jiffies(jiffies + (HZ * sleep_time) / 1000);
+ }
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s: temperature[%lu] sleep[%lu]\n",
tz->name, tz->temperature, sleep_time));
del_timer(&(tz->timer));
} else {
if (timer_pending(&(tz->timer)))
- mod_timer(&(tz->timer), (HZ * sleep_time) / 1000);
+ mod_timer(&(tz->timer), timeout_jiffies);
else {
tz->timer.data = (unsigned long)tz;
tz->timer.function = acpi_thermal_run;
- tz->timer.expires = jiffies + (HZ * sleep_time) / 1000;
+ tz->timer.expires = timeout_jiffies;
add_timer(&(tz->timer));
}
}
+ unlock:
+ mutex_unlock(&tz->lock);
+}
- return;
+/* sys I/F for generic thermal sysfs support */
+#define KELVIN_TO_MILLICELSIUS(t) (t * 100 - 273200)
+
+static int thermal_get_temp(struct thermal_zone_device *thermal, char *buf)
+{
+ struct acpi_thermal *tz = thermal->devdata;
+ int result;
+
+ if (!tz)
+ return -EINVAL;
+
+ result = acpi_thermal_get_temperature(tz);
+ if (result)
+ return result;
+
+ return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(tz->temperature));
+}
+
+static const char enabled[] = "kernel";
+static const char disabled[] = "user";
+static int thermal_get_mode(struct thermal_zone_device *thermal,
+ char *buf)
+{
+ struct acpi_thermal *tz = thermal->devdata;
+
+ if (!tz)
+ return -EINVAL;
+
+ return sprintf(buf, "%s\n", tz->tz_enabled ?
+ enabled : disabled);
+}
+
+static int thermal_set_mode(struct thermal_zone_device *thermal,
+ const char *buf)
+{
+ struct acpi_thermal *tz = thermal->devdata;
+ int enable;
+
+ if (!tz)
+ return -EINVAL;
+
+ /*
+ * enable/disable thermal management from ACPI thermal driver
+ */
+ if (!strncmp(buf, enabled, sizeof enabled - 1))
+ enable = 1;
+ else if (!strncmp(buf, disabled, sizeof disabled - 1))
+ enable = 0;
+ else
+ return -EINVAL;
+
+ if (enable != tz->tz_enabled) {
+ tz->tz_enabled = enable;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "%s ACPI thermal control\n",
+ tz->tz_enabled ? enabled : disabled));
+ acpi_thermal_check(tz);
+ }
+ return 0;
+}
+
+static int thermal_get_trip_type(struct thermal_zone_device *thermal,
+ int trip, char *buf)
+{
+ struct acpi_thermal *tz = thermal->devdata;
+ int i;
+
+ if (!tz || trip < 0)
+ return -EINVAL;
+
+ if (tz->trips.critical.flags.valid) {
+ if (!trip)
+ return sprintf(buf, "critical\n");
+ trip--;
+ }
+
+ if (tz->trips.hot.flags.valid) {
+ if (!trip)
+ return sprintf(buf, "hot\n");
+ trip--;
+ }
+
+ if (tz->trips.passive.flags.valid) {
+ if (!trip)
+ return sprintf(buf, "passive\n");
+ trip--;
+ }
+
+ for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
+ tz->trips.active[i].flags.valid; i++) {
+ if (!trip)
+ return sprintf(buf, "active%d\n", i);
+ trip--;
+ }
+
+ return -EINVAL;
+}
+
+static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
+ int trip, char *buf)
+{
+ struct acpi_thermal *tz = thermal->devdata;
+ int i;
+
+ if (!tz || trip < 0)
+ return -EINVAL;
+
+ if (tz->trips.critical.flags.valid) {
+ if (!trip)
+ return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
+ tz->trips.critical.temperature));
+ trip--;
+ }
+
+ if (tz->trips.hot.flags.valid) {
+ if (!trip)
+ return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
+ tz->trips.hot.temperature));
+ trip--;
+ }
+
+ if (tz->trips.passive.flags.valid) {
+ if (!trip)
+ return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
+ tz->trips.passive.temperature));
+ trip--;
+ }
+
+ for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
+ tz->trips.active[i].flags.valid; i++) {
+ if (!trip)
+ return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
+ tz->trips.active[i].temperature));
+ trip--;
+ }
+
+ return -EINVAL;
+}
+
+static int thermal_get_crit_temp(struct thermal_zone_device *thermal,
+ unsigned long *temperature) {
+ struct acpi_thermal *tz = thermal->devdata;
+
+ if (tz->trips.critical.flags.valid) {
+ *temperature = KELVIN_TO_MILLICELSIUS(
+ tz->trips.critical.temperature);
+ return 0;
+ } else
+ return -EINVAL;
+}
+
+typedef int (*cb)(struct thermal_zone_device *, int,
+ struct thermal_cooling_device *);
+static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev,
+ cb action)
+{
+ struct acpi_device *device = cdev->devdata;
+ struct acpi_thermal *tz = thermal->devdata;
+ struct acpi_device *dev;
+ acpi_status status;
+ acpi_handle handle;
+ int i;
+ int j;
+ int trip = -1;
+ int result = 0;
+
+ if (tz->trips.critical.flags.valid)
+ trip++;
+
+ if (tz->trips.hot.flags.valid)
+ trip++;
+
+ if (tz->trips.passive.flags.valid) {
+ trip++;
+ for (i = 0; i < tz->trips.passive.devices.count;
+ i++) {
+ handle = tz->trips.passive.devices.handles[i];
+ status = acpi_bus_get_device(handle, &dev);
+ if (ACPI_SUCCESS(status) && (dev == device)) {
+ result = action(thermal, trip, cdev);
+ if (result)
+ goto failed;
+ }
+ }
+ }
+
+ for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+ if (!tz->trips.active[i].flags.valid)
+ break;
+ trip++;
+ for (j = 0;
+ j < tz->trips.active[i].devices.count;
+ j++) {
+ handle = tz->trips.active[i].devices.handles[j];
+ status = acpi_bus_get_device(handle, &dev);
+ if (ACPI_SUCCESS(status) && (dev == device)) {
+ result = action(thermal, trip, cdev);
+ if (result)
+ goto failed;
+ }
+ }
+ }
+
+ for (i = 0; i < tz->devices.count; i++) {
+ handle = tz->devices.handles[i];
+ status = acpi_bus_get_device(handle, &dev);
+ if (ACPI_SUCCESS(status) && (dev == device)) {
+ result = action(thermal, -1, cdev);
+ if (result)
+ goto failed;
+ }
+ }
+
+failed:
+ return result;
+}
+
+static int
+acpi_thermal_bind_cooling_device(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ return acpi_thermal_cooling_device_cb(thermal, cdev,
+ thermal_zone_bind_cooling_device);
+}
+
+static int
+acpi_thermal_unbind_cooling_device(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ return acpi_thermal_cooling_device_cb(thermal, cdev,
+ thermal_zone_unbind_cooling_device);
+}
+
+static struct thermal_zone_device_ops acpi_thermal_zone_ops = {
+ .bind = acpi_thermal_bind_cooling_device,
+ .unbind = acpi_thermal_unbind_cooling_device,
+ .get_temp = thermal_get_temp,
+ .get_mode = thermal_get_mode,
+ .set_mode = thermal_set_mode,
+ .get_trip_type = thermal_get_trip_type,
+ .get_trip_temp = thermal_get_trip_temp,
+ .get_crit_temp = thermal_get_crit_temp,
+};
+
+static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
+{
+ int trips = 0;
+ int result;
+ acpi_status status;
+ int i;
+
+ if (tz->trips.critical.flags.valid)
+ trips++;
+
+ if (tz->trips.hot.flags.valid)
+ trips++;
+
+ if (tz->trips.passive.flags.valid)
+ trips++;
+
+ for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
+ tz->trips.active[i].flags.valid; i++, trips++);
+ tz->thermal_zone = thermal_zone_device_register("acpitz",
+ trips, tz, &acpi_thermal_zone_ops);
+ if (IS_ERR(tz->thermal_zone))
+ return -ENODEV;
+
+ result = sysfs_create_link(&tz->device->dev.kobj,
+ &tz->thermal_zone->device.kobj, "thermal_zone");
+ if (result)
+ return result;
+
+ result = sysfs_create_link(&tz->thermal_zone->device.kobj,
+ &tz->device->dev.kobj, "device");
+ if (result)
+ return result;
+
+ status = acpi_attach_data(tz->device->handle,
+ acpi_bus_private_data_handler,
+ tz->thermal_zone);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_ERR PREFIX
+ "Error attaching device data\n");
+ return -ENODEV;
+ }
+
+ tz->tz_enabled = 1;
+
+ dev_info(&tz->device->dev, "registered as thermal_zone%d\n",
+ tz->thermal_zone->id);
+ return 0;
}
+static void acpi_thermal_unregister_thermal_zone(struct acpi_thermal *tz)
+{
+ sysfs_remove_link(&tz->device->dev.kobj, "thermal_zone");
+ sysfs_remove_link(&tz->thermal_zone->device.kobj, "device");
+ thermal_zone_device_unregister(tz->thermal_zone);
+ tz->thermal_zone = NULL;
+ acpi_detach_data(tz->device->handle, acpi_bus_private_data_handler);
+}
+
+
/* --------------------------------------------------------------------------
FS Interface (/proc)
-------------------------------------------------------------------------- */
static int acpi_thermal_trip_seq_show(struct seq_file *seq, void *offset)
{
struct acpi_thermal *tz = seq->private;
+ struct acpi_device *device;
+ acpi_status status;
+
int i = 0;
int j = 0;
goto end;
if (tz->trips.critical.flags.valid)
- seq_printf(seq, "critical (S5): %ld C\n",
- KELVIN_TO_CELSIUS(tz->trips.critical.temperature));
+ seq_printf(seq, "critical (S5): %ld C%s",
+ KELVIN_TO_CELSIUS(tz->trips.critical.temperature),
+ nocrt ? " <disabled>\n" : "\n");
if (tz->trips.hot.flags.valid)
- seq_printf(seq, "hot (S4): %ld C\n",
- KELVIN_TO_CELSIUS(tz->trips.hot.temperature));
+ seq_printf(seq, "hot (S4): %ld C%s",
+ KELVIN_TO_CELSIUS(tz->trips.hot.temperature),
+ nocrt ? " <disabled>\n" : "\n");
if (tz->trips.passive.flags.valid) {
seq_printf(seq,
tz->trips.passive.tc1, tz->trips.passive.tc2,
tz->trips.passive.tsp);
for (j = 0; j < tz->trips.passive.devices.count; j++) {
-
- seq_printf(seq, "0x%p ",
- tz->trips.passive.devices.handles[j]);
+ status = acpi_bus_get_device(tz->trips.passive.devices.
+ handles[j], &device);
+ seq_printf(seq, "%4.4s ", status ? "" :
+ acpi_device_bid(device));
}
seq_puts(seq, "\n");
}
seq_printf(seq, "active[%d]: %ld C: devices=",
i,
KELVIN_TO_CELSIUS(tz->trips.active[i].temperature));
- for (j = 0; j < tz->trips.active[i].devices.count; j++)
- seq_printf(seq, "0x%p ",
- tz->trips.active[i].devices.handles[j]);
+ for (j = 0; j < tz->trips.active[i].devices.count; j++){
+ status = acpi_bus_get_device(tz->trips.active[i].
+ devices.handles[j],
+ &device);
+ seq_printf(seq, "%4.4s ", status ? "" :
+ acpi_device_bid(device));
+ }
seq_puts(seq, "\n");
}
return single_open(file, acpi_thermal_trip_seq_show, PDE(inode)->data);
}
-static ssize_t
-acpi_thermal_write_trip_points(struct file *file,
- const char __user * buffer,
- size_t count, loff_t * ppos)
-{
- struct seq_file *m = file->private_data;
- struct acpi_thermal *tz = m->private;
-
- char *limit_string;
- int num, critical, hot, passive;
- int *active;
- int i = 0;
-
-
- limit_string = kzalloc(ACPI_THERMAL_MAX_LIMIT_STR_LEN, GFP_KERNEL);
- if (!limit_string)
- return -ENOMEM;
-
- active = kmalloc(ACPI_THERMAL_MAX_ACTIVE * sizeof(int), GFP_KERNEL);
- if (!active) {
- kfree(limit_string);
- return -ENOMEM;
- }
-
- if (!tz || (count > ACPI_THERMAL_MAX_LIMIT_STR_LEN - 1)) {
- count = -EINVAL;
- goto end;
- }
-
- if (copy_from_user(limit_string, buffer, count)) {
- count = -EFAULT;
- goto end;
- }
-
- limit_string[count] = '\0';
-
- num = sscanf(limit_string, "%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d",
- &critical, &hot, &passive,
- &active[0], &active[1], &active[2], &active[3], &active[4],
- &active[5], &active[6], &active[7], &active[8],
- &active[9]);
- if (!(num >= 5 && num < (ACPI_THERMAL_MAX_ACTIVE + 3))) {
- count = -EINVAL;
- goto end;
- }
-
- tz->trips.critical.temperature = CELSIUS_TO_KELVIN(critical);
- tz->trips.hot.temperature = CELSIUS_TO_KELVIN(hot);
- tz->trips.passive.temperature = CELSIUS_TO_KELVIN(passive);
- for (i = 0; i < num - 3; i++) {
- if (!(tz->trips.active[i].flags.valid))
- break;
- tz->trips.active[i].temperature = CELSIUS_TO_KELVIN(active[i]);
- }
-
- end:
- kfree(active);
- kfree(limit_string);
- return count;
-}
-
static int acpi_thermal_cooling_seq_show(struct seq_file *seq, void *offset)
{
struct acpi_thermal *tz = seq->private;
if (!tz)
goto end;
- if (!tz->flags.cooling_mode) {
+ if (!tz->flags.cooling_mode)
seq_puts(seq, "<setting not supported>\n");
- }
-
- if (tz->cooling_mode == ACPI_THERMAL_MODE_CRITICAL)
- seq_printf(seq, "cooling mode: critical\n");
else
- seq_printf(seq, "cooling mode: %s\n",
- tz->cooling_mode ? "passive" : "active");
+ seq_puts(seq, "0 - Active; 1 - Passive\n");
end:
return 0;
}
/* 'state' [R] */
- entry = create_proc_entry(ACPI_THERMAL_FILE_STATE,
- S_IRUGO, acpi_device_dir(device));
+ entry = proc_create_data(ACPI_THERMAL_FILE_STATE,
+ S_IRUGO, acpi_device_dir(device),
+ &acpi_thermal_state_fops,
+ acpi_driver_data(device));
if (!entry)
return -ENODEV;
- else {
- entry->proc_fops = &acpi_thermal_state_fops;
- entry->data = acpi_driver_data(device);
- entry->owner = THIS_MODULE;
- }
/* 'temperature' [R] */
- entry = create_proc_entry(ACPI_THERMAL_FILE_TEMPERATURE,
- S_IRUGO, acpi_device_dir(device));
+ entry = proc_create_data(ACPI_THERMAL_FILE_TEMPERATURE,
+ S_IRUGO, acpi_device_dir(device),
+ &acpi_thermal_temp_fops,
+ acpi_driver_data(device));
if (!entry)
return -ENODEV;
- else {
- entry->proc_fops = &acpi_thermal_temp_fops;
- entry->data = acpi_driver_data(device);
- entry->owner = THIS_MODULE;
- }
- /* 'trip_points' [R/W] */
- entry = create_proc_entry(ACPI_THERMAL_FILE_TRIP_POINTS,
- S_IFREG | S_IRUGO | S_IWUSR,
- acpi_device_dir(device));
+ /* 'trip_points' [R] */
+ entry = proc_create_data(ACPI_THERMAL_FILE_TRIP_POINTS,
+ S_IRUGO,
+ acpi_device_dir(device),
+ &acpi_thermal_trip_fops,
+ acpi_driver_data(device));
if (!entry)
return -ENODEV;
- else {
- entry->proc_fops = &acpi_thermal_trip_fops;
- entry->data = acpi_driver_data(device);
- entry->owner = THIS_MODULE;
- }
/* 'cooling_mode' [R/W] */
- entry = create_proc_entry(ACPI_THERMAL_FILE_COOLING_MODE,
- S_IFREG | S_IRUGO | S_IWUSR,
- acpi_device_dir(device));
+ entry = proc_create_data(ACPI_THERMAL_FILE_COOLING_MODE,
+ S_IFREG | S_IRUGO | S_IWUSR,
+ acpi_device_dir(device),
+ &acpi_thermal_cooling_fops,
+ acpi_driver_data(device));
if (!entry)
return -ENODEV;
- else {
- entry->proc_fops = &acpi_thermal_cooling_fops;
- entry->data = acpi_driver_data(device);
- entry->owner = THIS_MODULE;
- }
/* 'polling_frequency' [R/W] */
- entry = create_proc_entry(ACPI_THERMAL_FILE_POLLING_FREQ,
- S_IFREG | S_IRUGO | S_IWUSR,
- acpi_device_dir(device));
+ entry = proc_create_data(ACPI_THERMAL_FILE_POLLING_FREQ,
+ S_IFREG | S_IRUGO | S_IWUSR,
+ acpi_device_dir(device),
+ &acpi_thermal_polling_fops,
+ acpi_driver_data(device));
if (!entry)
return -ENODEV;
- else {
- entry->proc_fops = &acpi_thermal_polling_fops;
- entry->data = acpi_driver_data(device);
- entry->owner = THIS_MODULE;
- }
-
return 0;
}
acpi_thermal_check(tz);
break;
case ACPI_THERMAL_NOTIFY_THRESHOLDS:
- acpi_thermal_get_trip_points(tz);
+ acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_THRESHOLDS);
acpi_thermal_check(tz);
- acpi_bus_generate_event(device, event, 0);
+ acpi_bus_generate_proc_event(device, event, 0);
+ acpi_bus_generate_netlink_event(device->pnp.device_class,
+ dev_name(&device->dev), event, 0);
break;
case ACPI_THERMAL_NOTIFY_DEVICES:
- if (tz->flags.devices)
- acpi_thermal_get_devices(tz);
- acpi_bus_generate_event(device, event, 0);
+ acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_DEVICES);
+ acpi_thermal_check(tz);
+ acpi_bus_generate_proc_event(device, event, 0);
+ acpi_bus_generate_netlink_event(device->pnp.device_class,
+ dev_name(&device->dev), event, 0);
break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
result = acpi_thermal_set_cooling_mode(tz, ACPI_THERMAL_MODE_ACTIVE);
if (!result)
tz->flags.cooling_mode = 1;
- else {
- /* Oh,we have not _SCP method.
- Generally show cooling_mode by _ACx, _PSV,spec 12.2 */
- tz->flags.cooling_mode = 0;
- if (tz->trips.active[0].flags.valid
- && tz->trips.passive.flags.valid) {
- if (tz->trips.passive.temperature >
- tz->trips.active[0].temperature)
- tz->cooling_mode = ACPI_THERMAL_MODE_ACTIVE;
- else
- tz->cooling_mode = ACPI_THERMAL_MODE_PASSIVE;
- } else if (!tz->trips.active[0].flags.valid
- && tz->trips.passive.flags.valid) {
- tz->cooling_mode = ACPI_THERMAL_MODE_PASSIVE;
- } else if (tz->trips.active[0].flags.valid
- && !tz->trips.passive.flags.valid) {
- tz->cooling_mode = ACPI_THERMAL_MODE_ACTIVE;
- } else {
- /* _ACx and _PSV are optional, but _CRT is required */
- tz->cooling_mode = ACPI_THERMAL_MODE_CRITICAL;
- }
- }
/* Get default polling frequency [_TZP] (optional) */
if (tzp)
else
acpi_thermal_get_polling_frequency(tz);
- /* Get devices in this thermal zone [_TZD] (optional) */
- result = acpi_thermal_get_devices(tz);
- if (!result)
- tz->flags.devices = 1;
-
return 0;
}
strcpy(tz->name, device->pnp.bus_id);
strcpy(acpi_device_name(device), ACPI_THERMAL_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_THERMAL_CLASS);
- acpi_driver_data(device) = tz;
+ device->driver_data = tz;
+ mutex_init(&tz->lock);
+
result = acpi_thermal_get_info(tz);
if (result)
- goto end;
+ goto free_memory;
+
+ result = acpi_thermal_register_thermal_zone(tz);
+ if (result)
+ goto free_memory;
result = acpi_thermal_add_fs(device);
if (result)
- goto end;
+ goto unregister_thermal_zone;
init_timer(&tz->timer);
+ acpi_thermal_active_off(tz);
+
acpi_thermal_check(tz);
status = acpi_install_notify_handler(device->handle,
acpi_thermal_notify, tz);
if (ACPI_FAILURE(status)) {
result = -ENODEV;
- goto end;
+ goto remove_fs;
}
printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n",
acpi_device_name(device), acpi_device_bid(device),
KELVIN_TO_CELSIUS(tz->temperature));
+ goto end;
- end:
- if (result) {
- acpi_thermal_remove_fs(device);
- kfree(tz);
- }
-
+remove_fs:
+ acpi_thermal_remove_fs(device);
+unregister_thermal_zone:
+ thermal_zone_device_unregister(tz->thermal_zone);
+free_memory:
+ kfree(tz);
+end:
return result;
}
}
acpi_thermal_remove_fs(device);
-
+ acpi_thermal_unregister_thermal_zone(tz);
+ mutex_destroy(&tz->lock);
kfree(tz);
return 0;
}
static int acpi_thermal_resume(struct acpi_device *device)
{
struct acpi_thermal *tz = NULL;
- int i;
+ int i, j, power_state, result;
+
if (!device || !acpi_driver_data(device))
return -EINVAL;
tz = acpi_driver_data(device);
- acpi_thermal_get_temperature(tz);
-
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
- if (tz->trips.active[i].flags.valid) {
- tz->temperature = tz->trips.active[i].temperature;
- tz->trips.active[i].flags.enabled = 0;
-
- acpi_thermal_active(tz);
-
- tz->state.active |= tz->trips.active[i].flags.enabled;
- tz->state.active_index = i;
+ if (!(&tz->trips.active[i]))
+ break;
+ if (!tz->trips.active[i].flags.valid)
+ break;
+ tz->trips.active[i].flags.enabled = 1;
+ for (j = 0; j < tz->trips.active[i].devices.count; j++) {
+ result = acpi_bus_get_power(tz->trips.active[i].devices.
+ handles[j], &power_state);
+ if (result || (power_state != ACPI_STATE_D0)) {
+ tz->trips.active[i].flags.enabled = 0;
+ break;
+ }
}
+ tz->state.active |= tz->trips.active[i].flags.enabled;
}
- acpi_thermal_check(tz);
+ acpi_thermal_check(tz);
return AE_OK;
}
+static int thermal_act(const struct dmi_system_id *d) {
+
+ if (act == 0) {
+ printk(KERN_NOTICE "ACPI: %s detected: "
+ "disabling all active thermal trip points\n", d->ident);
+ act = -1;
+ }
+ return 0;
+}
+static int thermal_nocrt(const struct dmi_system_id *d) {
+
+ printk(KERN_NOTICE "ACPI: %s detected: "
+ "disabling all critical thermal trip point actions.\n", d->ident);
+ nocrt = 1;
+ return 0;
+}
+static int thermal_tzp(const struct dmi_system_id *d) {
+
+ if (tzp == 0) {
+ printk(KERN_NOTICE "ACPI: %s detected: "
+ "enabling thermal zone polling\n", d->ident);
+ tzp = 300; /* 300 dS = 30 Seconds */
+ }
+ return 0;
+}
+static int thermal_psv(const struct dmi_system_id *d) {
+
+ if (psv == 0) {
+ printk(KERN_NOTICE "ACPI: %s detected: "
+ "disabling all passive thermal trip points\n", d->ident);
+ psv = -1;
+ }
+ return 0;
+}
+
+static struct dmi_system_id thermal_dmi_table[] __initdata = {
+ /*
+ * Award BIOS on this AOpen makes thermal control almost worthless.
+ * http://bugzilla.kernel.org/show_bug.cgi?id=8842
+ */
+ {
+ .callback = thermal_act,
+ .ident = "AOpen i915GMm-HFS",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+ DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
+ },
+ },
+ {
+ .callback = thermal_psv,
+ .ident = "AOpen i915GMm-HFS",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+ DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
+ },
+ },
+ {
+ .callback = thermal_tzp,
+ .ident = "AOpen i915GMm-HFS",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+ DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
+ },
+ },
+ {
+ .callback = thermal_nocrt,
+ .ident = "Gigabyte GA-7ZX",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "7ZX"),
+ },
+ },
+ {}
+};
+
static int __init acpi_thermal_init(void)
{
int result = 0;
+ dmi_check_system(thermal_dmi_table);
+ if (off) {
+ printk(KERN_NOTICE "ACPI: thermal control disabled\n");
+ return -ENODEV;
+ }
acpi_thermal_dir = proc_mkdir(ACPI_THERMAL_CLASS, acpi_root_dir);
if (!acpi_thermal_dir)
return -ENODEV;