#include <linux/init.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
-#include <linux/timer.h>
#include <linux/jiffies.h>
#include <linux/kmod.h>
#include <linux/seq_file.h>
#include <linux/reboot.h>
+#include <linux/device.h>
#include <asm/uaccess.h>
#include <linux/thermal.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#define PREFIX "ACPI: "
+
#define ACPI_THERMAL_CLASS "thermal_zone"
#define ACPI_THERMAL_DEVICE_NAME "Thermal Zone"
#define ACPI_THERMAL_FILE_STATE "state"
static int acpi_thermal_add(struct acpi_device *device);
static int acpi_thermal_remove(struct acpi_device *device, int type);
static int acpi_thermal_resume(struct acpi_device *device);
+static void acpi_thermal_notify(struct acpi_device *device, u32 event);
static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file);
static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file);
static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file);
.add = acpi_thermal_add,
.remove = acpi_thermal_remove,
.resume = acpi_thermal_resume,
+ .notify = acpi_thermal_notify,
},
};
struct acpi_thermal_state state;
struct acpi_thermal_trips trips;
struct acpi_handle_list devices;
- struct timer_list timer;
struct thermal_zone_device *thermal_zone;
int tz_enabled;
+ int kelvin_offset;
struct mutex lock;
};
tz->polling_frequency = seconds * 10; /* Convert value to deci-seconds */
+ tz->thermal_zone->polling_delay = seconds * 1000;
+
+ if (tz->tz_enabled)
+ thermal_zone_device_update(tz->thermal_zone);
+
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Polling frequency set to %lu seconds\n",
tz->polling_frequency/10));
return acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
}
-static int acpi_thermal_critical(struct acpi_thermal *tz)
-{
- if (!tz || !tz->trips.critical.flags.valid)
- return -EINVAL;
-
- if (tz->temperature >= tz->trips.critical.temperature) {
- printk(KERN_WARNING PREFIX "Critical trip point\n");
- tz->trips.critical.flags.enabled = 1;
- } else if (tz->trips.critical.flags.enabled)
- tz->trips.critical.flags.enabled = 0;
-
- acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL,
- tz->trips.critical.flags.enabled);
- acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
- dev_name(&tz->device->dev),
- ACPI_THERMAL_NOTIFY_CRITICAL,
- tz->trips.critical.flags.enabled);
-
- /* take no action if nocrt is set */
- if(!nocrt) {
- printk(KERN_EMERG
- "Critical temperature reached (%ld C), shutting down.\n",
- KELVIN_TO_CELSIUS(tz->temperature));
- orderly_poweroff(true);
- }
-
- return 0;
-}
-
-static int acpi_thermal_hot(struct acpi_thermal *tz)
-{
- if (!tz || !tz->trips.hot.flags.valid)
- return -EINVAL;
-
- if (tz->temperature >= tz->trips.hot.temperature) {
- printk(KERN_WARNING PREFIX "Hot trip point\n");
- tz->trips.hot.flags.enabled = 1;
- } else if (tz->trips.hot.flags.enabled)
- tz->trips.hot.flags.enabled = 0;
-
- acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_HOT,
- tz->trips.hot.flags.enabled);
- acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
- dev_name(&tz->device->dev),
- ACPI_THERMAL_NOTIFY_HOT,
- tz->trips.hot.flags.enabled);
-
- /* TBD: Call user-mode "sleep(S4)" function if nocrt is cleared */
-
- return 0;
-}
-
-static void acpi_thermal_passive(struct acpi_thermal *tz)
-{
- int result = 1;
- struct acpi_thermal_passive *passive = NULL;
- int trend = 0;
- int i = 0;
-
-
- if (!tz || !tz->trips.passive.flags.valid)
- return;
-
- passive = &(tz->trips.passive);
-
- /*
- * Above Trip?
- * -----------
- * Calculate the thermal trend (using the passive cooling equation)
- * and modify the performance limit for all passive cooling devices
- * accordingly. Note that we assume symmetry.
- */
- if (tz->temperature >= passive->temperature) {
- trend =
- (passive->tc1 * (tz->temperature - tz->last_temperature)) +
- (passive->tc2 * (tz->temperature - passive->temperature));
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "trend[%d]=(tc1[%lu]*(tmp[%lu]-last[%lu]))+(tc2[%lu]*(tmp[%lu]-psv[%lu]))\n",
- trend, passive->tc1, tz->temperature,
- tz->last_temperature, passive->tc2,
- tz->temperature, passive->temperature));
- passive->flags.enabled = 1;
- /* Heating up? */
- if (trend > 0)
- for (i = 0; i < passive->devices.count; i++)
- acpi_processor_set_thermal_limit(passive->
- devices.
- handles[i],
- ACPI_PROCESSOR_LIMIT_INCREMENT);
- /* Cooling off? */
- else if (trend < 0) {
- for (i = 0; i < passive->devices.count; i++)
- /*
- * assume that we are on highest
- * freq/lowest thrott and can leave
- * passive mode, even in error case
- */
- if (!acpi_processor_set_thermal_limit
- (passive->devices.handles[i],
- ACPI_PROCESSOR_LIMIT_DECREMENT))
- result = 0;
- /*
- * Leave cooling mode, even if the temp might
- * higher than trip point This is because some
- * machines might have long thermal polling
- * frequencies (tsp) defined. We will fall back
- * into passive mode in next cycle (probably quicker)
- */
- if (result) {
- passive->flags.enabled = 0;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Disabling passive cooling, still above threshold,"
- " but we are cooling down\n"));
- }
- }
- return;
- }
-
- /*
- * Below Trip?
- * -----------
- * Implement passive cooling hysteresis to slowly increase performance
- * and avoid thrashing around the passive trip point. Note that we
- * assume symmetry.
- */
- if (!passive->flags.enabled)
- return;
- for (i = 0; i < passive->devices.count; i++)
- if (!acpi_processor_set_thermal_limit
- (passive->devices.handles[i],
- ACPI_PROCESSOR_LIMIT_DECREMENT))
- result = 0;
- if (result) {
- passive->flags.enabled = 0;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Disabling passive cooling (zone is cool)\n"));
- }
-}
-
-static void acpi_thermal_active(struct acpi_thermal *tz)
-{
- int result = 0;
- struct acpi_thermal_active *active = NULL;
- int i = 0;
- int j = 0;
- unsigned long maxtemp = 0;
-
-
- if (!tz)
- return;
-
- for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
- active = &(tz->trips.active[i]);
- if (!active || !active->flags.valid)
- break;
- if (tz->temperature >= active->temperature) {
- /*
- * Above Threshold?
- * ----------------
- * If not already enabled, turn ON all cooling devices
- * associated with this active threshold.
- */
- if (active->temperature > maxtemp)
- tz->state.active_index = i;
- maxtemp = active->temperature;
- if (active->flags.enabled)
- continue;
- for (j = 0; j < active->devices.count; j++) {
- result =
- acpi_bus_set_power(active->devices.
- handles[j],
- ACPI_STATE_D0);
- if (result) {
- printk(KERN_WARNING PREFIX
- "Unable to turn cooling device [%p] 'on'\n",
- active->devices.
- handles[j]);
- continue;
- }
- active->flags.enabled = 1;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Cooling device [%p] now 'on'\n",
- active->devices.handles[j]));
- }
- continue;
- }
- if (!active->flags.enabled)
- continue;
- /*
- * Below Threshold?
- * ----------------
- * Turn OFF all cooling devices associated with this
- * threshold.
- */
- for (j = 0; j < active->devices.count; j++) {
- result = acpi_bus_set_power(active->devices.handles[j],
- ACPI_STATE_D3);
- if (result) {
- printk(KERN_WARNING PREFIX
- "Unable to turn cooling device [%p] 'off'\n",
- active->devices.handles[j]);
- continue;
- }
- active->flags.enabled = 0;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Cooling device [%p] now 'off'\n",
- active->devices.handles[j]));
- }
- }
-}
-
-static void acpi_thermal_check(void *context);
-
-static void acpi_thermal_run(unsigned long data)
-{
- struct acpi_thermal *tz = (struct acpi_thermal *)data;
- if (!tz->zombie)
- acpi_os_execute(OSL_GPE_HANDLER, acpi_thermal_check, (void *)data);
-}
-
-static void acpi_thermal_active_off(void *data)
-{
- int result = 0;
- struct acpi_thermal *tz = data;
- int i = 0;
- int j = 0;
- struct acpi_thermal_active *active = NULL;
-
- if (!tz) {
- printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
- return;
- }
-
- result = acpi_thermal_get_temperature(tz);
- if (result)
- return;
-
- for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
- active = &(tz->trips.active[i]);
- if (!active || !active->flags.valid)
- break;
- if (tz->temperature >= active->temperature) {
- /*
- * If the thermal temperature is greater than the
- * active threshod, unnecessary to turn off the
- * the active cooling device.
- */
- continue;
- }
- /*
- * Below Threshold?
- * ----------------
- * Turn OFF all cooling devices associated with this
- * threshold.
- */
- for (j = 0; j < active->devices.count; j++)
- result = acpi_bus_set_power(active->devices.handles[j],
- ACPI_STATE_D3);
- }
-}
-
static void acpi_thermal_check(void *data)
{
- int result = 0;
struct acpi_thermal *tz = data;
- unsigned long sleep_time = 0;
- unsigned long timeout_jiffies = 0;
- int i = 0;
- struct acpi_thermal_state state;
-
-
- if (!tz) {
- printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
- return;
- }
-
- /* Check if someone else is already running */
- if (!mutex_trylock(&tz->lock))
- return;
-
- state = tz->state;
-
- result = acpi_thermal_get_temperature(tz);
- if (result)
- goto unlock;
-
- if (!tz->tz_enabled)
- goto unlock;
-
- memset(&tz->state, 0, sizeof(tz->state));
-
- /*
- * Check Trip Points
- * -----------------
- * Compare the current temperature to the trip point values to see
- * if we've entered one of the thermal policy states. Note that
- * this function determines when a state is entered, but the
- * individual policy decides when it is exited (e.g. hysteresis).
- */
- if (tz->trips.critical.flags.valid)
- state.critical |=
- (tz->temperature >= tz->trips.critical.temperature);
- if (tz->trips.hot.flags.valid)
- state.hot |= (tz->temperature >= tz->trips.hot.temperature);
- if (tz->trips.passive.flags.valid)
- state.passive |=
- (tz->temperature >= tz->trips.passive.temperature);
- for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
- if (tz->trips.active[i].flags.valid)
- state.active |=
- (tz->temperature >=
- tz->trips.active[i].temperature);
- /*
- * Invoke Policy
- * -------------
- * Separated from the above check to allow individual policy to
- * determine when to exit a given state.
- */
- if (state.critical)
- acpi_thermal_critical(tz);
- if (state.hot)
- acpi_thermal_hot(tz);
- if (state.passive)
- acpi_thermal_passive(tz);
- if (state.active)
- acpi_thermal_active(tz);
-
- /*
- * Calculate State
- * ---------------
- * Again, separated from the above two to allow independent policy
- * decisions.
- */
- tz->state.critical = tz->trips.critical.flags.enabled;
- tz->state.hot = tz->trips.hot.flags.enabled;
- tz->state.passive = tz->trips.passive.flags.enabled;
- tz->state.active = 0;
- for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
- tz->state.active |= tz->trips.active[i].flags.enabled;
-
- /*
- * Calculate Sleep Time
- * --------------------
- * If we're in the passive state, use _TSP's value. Otherwise
- * use the default polling frequency (e.g. _TZP). If no polling
- * frequency is specified then we'll wait forever (at least until
- * a thermal event occurs). Note that _TSP and _TZD values are
- * given in 1/10th seconds (we must covert to milliseconds).
- */
- if (tz->state.passive) {
- sleep_time = tz->trips.passive.tsp * 100;
- timeout_jiffies = jiffies + (HZ * sleep_time) / 1000;
- } else if (tz->polling_frequency > 0) {
- sleep_time = tz->polling_frequency * 100;
- timeout_jiffies = round_jiffies(jiffies + (HZ * sleep_time) / 1000);
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s: temperature[%lu] sleep[%lu]\n",
- tz->name, tz->temperature, sleep_time));
-
- /*
- * Schedule Next Poll
- * ------------------
- */
- if (!sleep_time) {
- if (timer_pending(&(tz->timer)))
- del_timer(&(tz->timer));
- } else {
- if (timer_pending(&(tz->timer)))
- mod_timer(&(tz->timer), timeout_jiffies);
- else {
- tz->timer.data = (unsigned long)tz;
- tz->timer.function = acpi_thermal_run;
- tz->timer.expires = timeout_jiffies;
- add_timer(&(tz->timer));
- }
- }
- unlock:
- mutex_unlock(&tz->lock);
+ thermal_zone_device_update(tz->thermal_zone);
}
/* sys I/F for generic thermal sysfs support */
-#define KELVIN_TO_MILLICELSIUS(t) (t * 100 - 273200)
+#define KELVIN_TO_MILLICELSIUS(t, off) (((t) - (off)) * 100)
-static int thermal_get_temp(struct thermal_zone_device *thermal, char *buf)
+static int thermal_get_temp(struct thermal_zone_device *thermal,
+ unsigned long *temp)
{
struct acpi_thermal *tz = thermal->devdata;
int result;
if (result)
return result;
- return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(tz->temperature));
+ *temp = KELVIN_TO_MILLICELSIUS(tz->temperature, tz->kelvin_offset);
+ return 0;
}
static const char enabled[] = "kernel";
static const char disabled[] = "user";
static int thermal_get_mode(struct thermal_zone_device *thermal,
- char *buf)
+ enum thermal_device_mode *mode)
{
struct acpi_thermal *tz = thermal->devdata;
if (!tz)
return -EINVAL;
- return sprintf(buf, "%s\n", tz->tz_enabled ?
- enabled : disabled);
+ *mode = tz->tz_enabled ? THERMAL_DEVICE_ENABLED :
+ THERMAL_DEVICE_DISABLED;
+
+ return 0;
}
static int thermal_set_mode(struct thermal_zone_device *thermal,
- const char *buf)
+ enum thermal_device_mode mode)
{
struct acpi_thermal *tz = thermal->devdata;
int enable;
/*
* enable/disable thermal management from ACPI thermal driver
*/
- if (!strncmp(buf, enabled, sizeof enabled - 1))
+ if (mode == THERMAL_DEVICE_ENABLED)
enable = 1;
- else if (!strncmp(buf, disabled, sizeof disabled - 1))
+ else if (mode == THERMAL_DEVICE_DISABLED)
enable = 0;
else
return -EINVAL;
}
static int thermal_get_trip_type(struct thermal_zone_device *thermal,
- int trip, char *buf)
+ int trip, enum thermal_trip_type *type)
{
struct acpi_thermal *tz = thermal->devdata;
int i;
return -EINVAL;
if (tz->trips.critical.flags.valid) {
- if (!trip)
- return sprintf(buf, "critical\n");
+ if (!trip) {
+ *type = THERMAL_TRIP_CRITICAL;
+ return 0;
+ }
trip--;
}
if (tz->trips.hot.flags.valid) {
- if (!trip)
- return sprintf(buf, "hot\n");
+ if (!trip) {
+ *type = THERMAL_TRIP_HOT;
+ return 0;
+ }
trip--;
}
if (tz->trips.passive.flags.valid) {
- if (!trip)
- return sprintf(buf, "passive\n");
+ if (!trip) {
+ *type = THERMAL_TRIP_PASSIVE;
+ return 0;
+ }
trip--;
}
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
tz->trips.active[i].flags.valid; i++) {
- if (!trip)
- return sprintf(buf, "active%d\n", i);
+ if (!trip) {
+ *type = THERMAL_TRIP_ACTIVE;
+ return 0;
+ }
trip--;
}
}
static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
- int trip, char *buf)
+ int trip, unsigned long *temp)
{
struct acpi_thermal *tz = thermal->devdata;
int i;
return -EINVAL;
if (tz->trips.critical.flags.valid) {
- if (!trip)
- return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
- tz->trips.critical.temperature));
+ if (!trip) {
+ *temp = KELVIN_TO_MILLICELSIUS(
+ tz->trips.critical.temperature,
+ tz->kelvin_offset);
+ return 0;
+ }
trip--;
}
if (tz->trips.hot.flags.valid) {
- if (!trip)
- return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
- tz->trips.hot.temperature));
+ if (!trip) {
+ *temp = KELVIN_TO_MILLICELSIUS(
+ tz->trips.hot.temperature,
+ tz->kelvin_offset);
+ return 0;
+ }
trip--;
}
if (tz->trips.passive.flags.valid) {
- if (!trip)
- return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
- tz->trips.passive.temperature));
+ if (!trip) {
+ *temp = KELVIN_TO_MILLICELSIUS(
+ tz->trips.passive.temperature,
+ tz->kelvin_offset);
+ return 0;
+ }
trip--;
}
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
tz->trips.active[i].flags.valid; i++) {
- if (!trip)
- return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
- tz->trips.active[i].temperature));
+ if (!trip) {
+ *temp = KELVIN_TO_MILLICELSIUS(
+ tz->trips.active[i].temperature,
+ tz->kelvin_offset);
+ return 0;
+ }
trip--;
}
if (tz->trips.critical.flags.valid) {
*temperature = KELVIN_TO_MILLICELSIUS(
- tz->trips.critical.temperature);
+ tz->trips.critical.temperature,
+ tz->kelvin_offset);
return 0;
} else
return -EINVAL;
}
+static int thermal_notify(struct thermal_zone_device *thermal, int trip,
+ enum thermal_trip_type trip_type)
+{
+ u8 type = 0;
+ struct acpi_thermal *tz = thermal->devdata;
+
+ if (trip_type == THERMAL_TRIP_CRITICAL)
+ type = ACPI_THERMAL_NOTIFY_CRITICAL;
+ else if (trip_type == THERMAL_TRIP_HOT)
+ type = ACPI_THERMAL_NOTIFY_HOT;
+ else
+ return 0;
+
+ acpi_bus_generate_proc_event(tz->device, type, 1);
+ acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
+ dev_name(&tz->device->dev), type, 1);
+
+ if (trip_type == THERMAL_TRIP_CRITICAL && nocrt)
+ return 1;
+
+ return 0;
+}
+
typedef int (*cb)(struct thermal_zone_device *, int,
struct thermal_cooling_device *);
static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
.get_trip_type = thermal_get_trip_type,
.get_trip_temp = thermal_get_trip_temp,
.get_crit_temp = thermal_get_crit_temp,
+ .notify = thermal_notify,
};
static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
tz->trips.active[i].flags.valid; i++, trips++);
- tz->thermal_zone = thermal_zone_device_register("acpitz",
- trips, tz, &acpi_thermal_zone_ops);
+
+ if (tz->trips.passive.flags.valid)
+ tz->thermal_zone =
+ thermal_zone_device_register("acpitz", trips, tz,
+ &acpi_thermal_zone_ops,
+ tz->trips.passive.tc1,
+ tz->trips.passive.tc2,
+ tz->trips.passive.tsp*100,
+ tz->polling_frequency*100);
+ else
+ tz->thermal_zone =
+ thermal_zone_device_register("acpitz", trips, tz,
+ &acpi_thermal_zone_ops,
+ 0, 0, 0,
+ tz->polling_frequency*100);
if (IS_ERR(tz->thermal_zone))
return -ENODEV;
acpi_device_bid(device));
}
seq_puts(seq, "\n");
+ } else {
+ seq_printf(seq, "passive (forced):");
+ if (tz->thermal_zone->forced_passive)
+ seq_printf(seq, " %i C\n",
+ tz->thermal_zone->forced_passive / 1000);
+ else
+ seq_printf(seq, "<not set>\n");
}
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
if (!tz)
goto end;
- if (!tz->polling_frequency) {
+ if (!tz->thermal_zone->polling_delay) {
seq_puts(seq, "<polling disabled>\n");
goto end;
}
- seq_printf(seq, "polling frequency: %lu seconds\n",
- (tz->polling_frequency / 10));
+ seq_printf(seq, "polling frequency: %d seconds\n",
+ (tz->thermal_zone->polling_delay / 1000));
end:
return 0;
Driver Interface
-------------------------------------------------------------------------- */
-static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data)
+static void acpi_thermal_notify(struct acpi_device *device, u32 event)
{
- struct acpi_thermal *tz = data;
- struct acpi_device *device = NULL;
+ struct acpi_thermal *tz = acpi_driver_data(device);
if (!tz)
return;
- device = tz->device;
-
switch (event) {
case ACPI_THERMAL_NOTIFY_TEMPERATURE:
acpi_thermal_check(tz);
"Unsupported event [0x%x]\n", event));
break;
}
-
- return;
}
static int acpi_thermal_get_info(struct acpi_thermal *tz)
return 0;
}
+/*
+ * The exact offset between Kelvin and degree Celsius is 273.15. However ACPI
+ * handles temperature values with a single decimal place. As a consequence,
+ * some implementations use an offset of 273.1 and others use an offset of
+ * 273.2. Try to find out which one is being used, to present the most
+ * accurate and visually appealing number.
+ *
+ * The heuristic below should work for all ACPI thermal zones which have a
+ * critical trip point with a value being a multiple of 0.5 degree Celsius.
+ */
+static void acpi_thermal_guess_offset(struct acpi_thermal *tz)
+{
+ if (tz->trips.critical.flags.valid &&
+ (tz->trips.critical.temperature % 5) == 1)
+ tz->kelvin_offset = 2731;
+ else
+ tz->kelvin_offset = 2732;
+}
+
static int acpi_thermal_add(struct acpi_device *device)
{
int result = 0;
- acpi_status status = AE_OK;
struct acpi_thermal *tz = NULL;
if (result)
goto free_memory;
+ acpi_thermal_guess_offset(tz);
+
result = acpi_thermal_register_thermal_zone(tz);
if (result)
goto free_memory;
if (result)
goto unregister_thermal_zone;
- init_timer(&tz->timer);
-
- acpi_thermal_active_off(tz);
-
- acpi_thermal_check(tz);
-
- status = acpi_install_notify_handler(device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_thermal_notify, tz);
- if (ACPI_FAILURE(status)) {
- result = -ENODEV;
- goto remove_fs;
- }
-
printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n",
acpi_device_name(device), acpi_device_bid(device),
KELVIN_TO_CELSIUS(tz->temperature));
goto end;
-remove_fs:
- acpi_thermal_remove_fs(device);
unregister_thermal_zone:
thermal_zone_device_unregister(tz->thermal_zone);
free_memory:
static int acpi_thermal_remove(struct acpi_device *device, int type)
{
- acpi_status status = AE_OK;
struct acpi_thermal *tz = NULL;
-
if (!device || !acpi_driver_data(device))
return -EINVAL;
tz = acpi_driver_data(device);
- /* avoid timer adding new defer task */
- tz->zombie = 1;
- /* wait for running timer (on other CPUs) finish */
- del_timer_sync(&(tz->timer));
- /* synchronize deferred task */
- acpi_os_wait_events_complete(NULL);
- /* deferred task may reinsert timer */
- del_timer_sync(&(tz->timer));
-
- status = acpi_remove_notify_handler(device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_thermal_notify);
-
- /* Terminate policy */
- if (tz->trips.passive.flags.valid && tz->trips.passive.flags.enabled) {
- tz->trips.passive.flags.enabled = 0;
- acpi_thermal_passive(tz);
- }
- if (tz->trips.active[0].flags.valid
- && tz->trips.active[0].flags.enabled) {
- tz->trips.active[0].flags.enabled = 0;
- acpi_thermal_active(tz);
- }
-
acpi_thermal_remove_fs(device);
acpi_thermal_unregister_thermal_zone(tz);
mutex_destroy(&tz->lock);