#include <linux/dmi.h>
#include <linux/device.h>
#include <linux/suspend.h>
+#include <linux/reboot.h>
#include <asm/io.h>
u8 sleep_states[ACPI_S_STATE_COUNT];
-#ifdef CONFIG_PM_SLEEP
-static u32 acpi_target_sleep_state = ACPI_STATE_S0;
-#endif
+static void acpi_sleep_tts_switch(u32 acpi_state)
+{
+ union acpi_object in_arg = { ACPI_TYPE_INTEGER };
+ struct acpi_object_list arg_list = { 1, &in_arg };
+ acpi_status status = AE_OK;
+
+ in_arg.integer.value = acpi_state;
+ status = acpi_evaluate_object(NULL, "\\_TTS", &arg_list, NULL);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ /*
+ * OS can't evaluate the _TTS object correctly. Some warning
+ * message will be printed. But it won't break anything.
+ */
+ printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
+ }
+}
+
+static int tts_notify_reboot(struct notifier_block *this,
+ unsigned long code, void *x)
+{
+ acpi_sleep_tts_switch(ACPI_STATE_S5);
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block tts_notifier = {
+ .notifier_call = tts_notify_reboot,
+ .next = NULL,
+ .priority = 0,
+};
-int acpi_sleep_prepare(u32 acpi_state)
+static int acpi_sleep_prepare(u32 acpi_state)
{
#ifdef CONFIG_ACPI_SLEEP
/* do we have a wakeup address for S2 and S3? */
if (!acpi_wakeup_address) {
return -EFAULT;
}
- acpi_set_firmware_waking_vector((acpi_physical_address)
- virt_to_phys((void *)
- acpi_wakeup_address));
+ acpi_set_firmware_waking_vector(
+ (acpi_physical_address)acpi_wakeup_address);
}
ACPI_FLUSH_CPU_CACHE();
acpi_enable_wakeup_device_prep(acpi_state);
#endif
- acpi_gpe_sleep_prepare(acpi_state);
+ printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
+ acpi_state);
acpi_enter_sleep_state_prep(acpi_state);
return 0;
}
-#ifdef CONFIG_SUSPEND
-static struct platform_suspend_ops acpi_pm_ops;
+#ifdef CONFIG_ACPI_SLEEP
+static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+/*
+ * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
+ * user to request that behavior by using the 'acpi_old_suspend_ordering'
+ * kernel command line option that causes the following variable to be set.
+ */
+static bool old_suspend_ordering;
+
+void __init acpi_old_suspend_ordering(void)
+{
+ old_suspend_ordering = true;
+}
+
+/*
+ * According to the ACPI specification the BIOS should make sure that ACPI is
+ * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still,
+ * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
+ * on such systems during resume. Unfortunately that doesn't help in
+ * particularly pathological cases in which SCI_EN has to be set directly on
+ * resume, although the specification states very clearly that this flag is
+ * owned by the hardware. The set_sci_en_on_resume variable will be set in such
+ * cases.
+ */
+static bool set_sci_en_on_resume;
+/**
+ * acpi_pm_disable_gpes - Disable the GPEs.
+ */
+static int acpi_pm_disable_gpes(void)
+{
+ acpi_hw_disable_all_gpes();
+ return 0;
+}
+
+/**
+ * __acpi_pm_prepare - Prepare the platform to enter the target state.
+ *
+ * If necessary, set the firmware waking vector and do arch-specific
+ * nastiness to get the wakeup code to the waking vector.
+ */
+static int __acpi_pm_prepare(void)
+{
+ int error = acpi_sleep_prepare(acpi_target_sleep_state);
+
+ if (error)
+ acpi_target_sleep_state = ACPI_STATE_S0;
+ return error;
+}
+
+/**
+ * acpi_pm_prepare - Prepare the platform to enter the target sleep
+ * state and disable the GPEs.
+ */
+static int acpi_pm_prepare(void)
+{
+ int error = __acpi_pm_prepare();
+
+ if (!error)
+ acpi_hw_disable_all_gpes();
+ return error;
+}
+
+/**
+ * acpi_pm_finish - Instruct the platform to leave a sleep state.
+ *
+ * This is called after we wake back up (or if entering the sleep state
+ * failed).
+ */
+static void acpi_pm_finish(void)
+{
+ u32 acpi_state = acpi_target_sleep_state;
+
+ if (acpi_state == ACPI_STATE_S0)
+ return;
+
+ printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
+ acpi_state);
+ acpi_disable_wakeup_device(acpi_state);
+ acpi_leave_sleep_state(acpi_state);
+
+ /* reset firmware waking vector */
+ acpi_set_firmware_waking_vector((acpi_physical_address) 0);
+
+ acpi_target_sleep_state = ACPI_STATE_S0;
+}
+
+/**
+ * acpi_pm_end - Finish up suspend sequence.
+ */
+static void acpi_pm_end(void)
+{
+ /*
+ * This is necessary in case acpi_pm_finish() is not called during a
+ * failing transition to a sleep state.
+ */
+ acpi_target_sleep_state = ACPI_STATE_S0;
+ acpi_sleep_tts_switch(acpi_target_sleep_state);
+}
+#else /* !CONFIG_ACPI_SLEEP */
+#define acpi_target_sleep_state ACPI_STATE_S0
+#endif /* CONFIG_ACPI_SLEEP */
+
+#ifdef CONFIG_SUSPEND
extern void do_suspend_lowlevel(void);
static u32 acpi_suspend_states[] = {
[PM_SUSPEND_MAX] = ACPI_STATE_S5
};
-static int init_8259A_after_S1;
-
/**
- * acpi_pm_set_target - Set the target system sleep state to the state
+ * acpi_suspend_begin - Set the target system sleep state to the state
* associated with given @pm_state, if supported.
*/
-
-static int acpi_pm_set_target(suspend_state_t pm_state)
+static int acpi_suspend_begin(suspend_state_t pm_state)
{
u32 acpi_state = acpi_suspend_states[pm_state];
int error = 0;
if (sleep_states[acpi_state]) {
acpi_target_sleep_state = acpi_state;
+ acpi_sleep_tts_switch(acpi_target_sleep_state);
} else {
printk(KERN_ERR "ACPI does not support this state: %d\n",
pm_state);
}
/**
- * acpi_pm_prepare - Do preliminary suspend work.
- * @pm_state: ignored
- *
- * If necessary, set the firmware waking vector and do arch-specific
- * nastiness to get the wakeup code to the waking vector.
- */
-
-static int acpi_pm_prepare(suspend_state_t pm_state)
-{
- int error = acpi_sleep_prepare(acpi_target_sleep_state);
-
- if (error)
- acpi_target_sleep_state = ACPI_STATE_S0;
-
- return error;
-}
-
-/**
- * acpi_pm_enter - Actually enter a sleep state.
+ * acpi_suspend_enter - Actually enter a sleep state.
* @pm_state: ignored
*
* Flush caches and go to sleep. For STR we have to call arch-specific
* assembly, which in turn call acpi_enter_sleep_state().
* It's unfortunate, but it works. Please fix if you're feeling frisky.
*/
-
-static int acpi_pm_enter(suspend_state_t pm_state)
+static int acpi_suspend_enter(suspend_state_t pm_state)
{
acpi_status status = AE_OK;
unsigned long flags = 0;
if (acpi_state == ACPI_STATE_S3) {
int error = acpi_save_state_mem();
- if (error) {
- acpi_target_sleep_state = ACPI_STATE_S0;
+ if (error)
return error;
- }
}
local_irq_save(flags);
break;
}
- /* ACPI 3.0 specs (P62) says that it's the responsabilty
+ /* If ACPI is not enabled by the BIOS, we need to enable it here. */
+ if (set_sci_en_on_resume)
+ acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1);
+ else
+ acpi_enable();
+
+ /* Reprogram control registers and execute _BFS */
+ acpi_leave_sleep_state_prep(acpi_state);
+
+ /* ACPI 3.0 specs (P62) says that it's the responsibility
* of the OSPM to clear the status bit [ implying that the
* POWER_BUTTON event should not reach userspace ]
*/
if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3))
acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
+ /*
+ * Disable and clear GPE status before interrupt is enabled. Some GPEs
+ * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
+ * acpi_leave_sleep_state will reenable specific GPEs later
+ */
+ acpi_hw_disable_all_gpes();
+
local_irq_restore(flags);
printk(KERN_DEBUG "Back to C!\n");
return ACPI_SUCCESS(status) ? 0 : -EFAULT;
}
-/**
- * acpi_pm_finish - Finish up suspend sequence.
- * @pm_state: ignored
- *
- * This is called after we wake back up (or if entering the sleep state
- * failed).
- */
-
-static int acpi_pm_finish(suspend_state_t pm_state)
-{
- u32 acpi_state = acpi_target_sleep_state;
-
- acpi_leave_sleep_state(acpi_state);
- acpi_disable_wakeup_device(acpi_state);
-
- /* reset firmware waking vector */
- acpi_set_firmware_waking_vector((acpi_physical_address) 0);
-
- acpi_target_sleep_state = ACPI_STATE_S0;
-
-#ifdef CONFIG_X86
- if (init_8259A_after_S1) {
- printk("Broken toshiba laptop -> kicking interrupts\n");
- init_8259A(0);
- }
-#endif
- return 0;
-}
-
-static int acpi_pm_state_valid(suspend_state_t pm_state)
+static int acpi_suspend_state_valid(suspend_state_t pm_state)
{
u32 acpi_state;
}
}
-static struct platform_suspend_ops acpi_pm_ops = {
- .valid = acpi_pm_state_valid,
- .set_target = acpi_pm_set_target,
+static struct platform_suspend_ops acpi_suspend_ops = {
+ .valid = acpi_suspend_state_valid,
+ .begin = acpi_suspend_begin,
.prepare = acpi_pm_prepare,
- .enter = acpi_pm_enter,
+ .enter = acpi_suspend_enter,
.finish = acpi_pm_finish,
+ .end = acpi_pm_end,
};
+/**
+ * acpi_suspend_begin_old - Set the target system sleep state to the
+ * state associated with given @pm_state, if supported, and
+ * execute the _PTS control method. This function is used if the
+ * pre-ACPI 2.0 suspend ordering has been requested.
+ */
+static int acpi_suspend_begin_old(suspend_state_t pm_state)
+{
+ int error = acpi_suspend_begin(pm_state);
+
+ if (!error)
+ error = __acpi_pm_prepare();
+ return error;
+}
+
/*
- * Toshiba fails to preserve interrupts over S1, reinitialization
- * of 8259 is needed after S1 resume.
+ * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
+ * been requested.
*/
-static int __init init_ints_after_s1(const struct dmi_system_id *d)
+static struct platform_suspend_ops acpi_suspend_ops_old = {
+ .valid = acpi_suspend_state_valid,
+ .begin = acpi_suspend_begin_old,
+ .prepare = acpi_pm_disable_gpes,
+ .enter = acpi_suspend_enter,
+ .finish = acpi_pm_finish,
+ .end = acpi_pm_end,
+ .recover = acpi_pm_finish,
+};
+
+static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
+{
+ old_suspend_ordering = true;
+ return 0;
+}
+
+static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d)
{
- printk(KERN_WARNING "%s with broken S1 detected.\n", d->ident);
- init_8259A_after_S1 = 1;
+ set_sci_en_on_resume = true;
return 0;
}
static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
{
- .callback = init_ints_after_s1,
- .ident = "Toshiba Satellite 4030cdt",
- .matches = {DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),},
- },
+ .callback = init_old_suspend_ordering,
+ .ident = "Abit KN9 (nForce4 variant)",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
+ DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
+ },
+ },
+ {
+ .callback = init_old_suspend_ordering,
+ .ident = "HP xw4600 Workstation",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Apple MacBook 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Apple MacMini 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+ },
+ },
{},
};
#endif /* CONFIG_SUSPEND */
#ifdef CONFIG_HIBERNATION
-static int acpi_hibernation_prepare(void)
+static unsigned long s4_hardware_signature;
+static struct acpi_table_facs *facs;
+static bool nosigcheck;
+
+void __init acpi_no_s4_hw_signature(void)
{
- return acpi_sleep_prepare(ACPI_STATE_S4);
+ nosigcheck = true;
+}
+
+static int acpi_hibernation_begin(void)
+{
+ acpi_target_sleep_state = ACPI_STATE_S4;
+ acpi_sleep_tts_switch(acpi_target_sleep_state);
+ return 0;
}
static int acpi_hibernation_enter(void)
acpi_enable_wakeup_device(ACPI_STATE_S4);
/* This shouldn't return. If it returns, we have a problem */
status = acpi_enter_sleep_state(ACPI_STATE_S4);
+ /* Reprogram control registers and execute _BFS */
+ acpi_leave_sleep_state_prep(ACPI_STATE_S4);
local_irq_restore(flags);
return ACPI_SUCCESS(status) ? 0 : -EFAULT;
}
-static void acpi_hibernation_finish(void)
+static void acpi_hibernation_leave(void)
{
- acpi_leave_sleep_state(ACPI_STATE_S4);
- acpi_disable_wakeup_device(ACPI_STATE_S4);
-
- /* reset firmware waking vector */
- acpi_set_firmware_waking_vector((acpi_physical_address) 0);
+ /*
+ * If ACPI is not enabled by the BIOS and the boot kernel, we need to
+ * enable it here.
+ */
+ acpi_enable();
+ /* Reprogram control registers and execute _BFS */
+ acpi_leave_sleep_state_prep(ACPI_STATE_S4);
+ /* Check the hardware signature */
+ if (facs && s4_hardware_signature != facs->hardware_signature) {
+ printk(KERN_EMERG "ACPI: Hardware changed while hibernated, "
+ "cannot resume!\n");
+ panic("ACPI S4 hardware signature mismatch");
+ }
}
-static int acpi_hibernation_pre_restore(void)
+static void acpi_pm_enable_gpes(void)
{
- acpi_status status;
-
- status = acpi_hw_disable_all_gpes();
-
- return ACPI_SUCCESS(status) ? 0 : -EFAULT;
+ acpi_hw_enable_all_runtime_gpes();
}
-static void acpi_hibernation_restore_cleanup(void)
+static struct platform_hibernation_ops acpi_hibernation_ops = {
+ .begin = acpi_hibernation_begin,
+ .end = acpi_pm_end,
+ .pre_snapshot = acpi_pm_prepare,
+ .finish = acpi_pm_finish,
+ .prepare = acpi_pm_prepare,
+ .enter = acpi_hibernation_enter,
+ .leave = acpi_hibernation_leave,
+ .pre_restore = acpi_pm_disable_gpes,
+ .restore_cleanup = acpi_pm_enable_gpes,
+};
+
+/**
+ * acpi_hibernation_begin_old - Set the target system sleep state to
+ * ACPI_STATE_S4 and execute the _PTS control method. This
+ * function is used if the pre-ACPI 2.0 suspend ordering has been
+ * requested.
+ */
+static int acpi_hibernation_begin_old(void)
{
- acpi_hw_enable_all_runtime_gpes();
+ int error;
+ /*
+ * The _TTS object should always be evaluated before the _PTS object.
+ * When the old_suspended_ordering is true, the _PTS object is
+ * evaluated in the acpi_sleep_prepare.
+ */
+ acpi_sleep_tts_switch(ACPI_STATE_S4);
+
+ error = acpi_sleep_prepare(ACPI_STATE_S4);
+
+ if (!error)
+ acpi_target_sleep_state = ACPI_STATE_S4;
+ return error;
}
-static struct hibernation_ops acpi_hibernation_ops = {
- .prepare = acpi_hibernation_prepare,
+/*
+ * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
+ * been requested.
+ */
+static struct platform_hibernation_ops acpi_hibernation_ops_old = {
+ .begin = acpi_hibernation_begin_old,
+ .end = acpi_pm_end,
+ .pre_snapshot = acpi_pm_disable_gpes,
+ .finish = acpi_pm_finish,
+ .prepare = acpi_pm_disable_gpes,
.enter = acpi_hibernation_enter,
- .finish = acpi_hibernation_finish,
- .pre_restore = acpi_hibernation_pre_restore,
- .restore_cleanup = acpi_hibernation_restore_cleanup,
+ .leave = acpi_hibernation_leave,
+ .pre_restore = acpi_pm_disable_gpes,
+ .restore_cleanup = acpi_pm_enable_gpes,
+ .recover = acpi_pm_finish,
};
-#endif /* CONFIG_HIBERNATION */
+#endif /* CONFIG_HIBERNATION */
int acpi_suspend(u32 acpi_state)
{
/**
* acpi_pm_device_sleep_state - return preferred power state of ACPI device
* in the system sleep state given by %acpi_target_sleep_state
- * @dev: device to examine
- * @wake: if set, the device should be able to wake up the system
+ * @dev: device to examine; its driver model wakeup flags control
+ * whether it should be able to wake up the system
* @d_min_p: used to store the upper limit of allowed states range
* Return value: preferred power state of the device on success, -ENODEV on
* failure (ie. if there's no 'struct acpi_device' for @dev)
* via @wake.
*/
-int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p)
+int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p)
{
acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
struct acpi_device *adev;
char acpi_method[] = "_SxD";
- unsigned long d_min, d_max;
+ unsigned long long d_min, d_max;
if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
printk(KERN_DEBUG "ACPI handle has no context!\n");
* can wake the system. _S0W may be valid, too.
*/
if (acpi_target_sleep_state == ACPI_STATE_S0 ||
- (wake && adev->wakeup.state.enabled &&
+ (device_may_wakeup(dev) && adev->wakeup.state.enabled &&
adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
+ acpi_status status;
+
acpi_method[3] = 'W';
- acpi_evaluate_integer(handle, acpi_method, NULL, &d_max);
- /* Sanity check */
- if (d_max < d_min)
+ status = acpi_evaluate_integer(handle, acpi_method, NULL,
+ &d_max);
+ if (ACPI_FAILURE(status)) {
+ d_max = d_min;
+ } else if (d_max < d_min) {
+ /* Warn the user of the broken DSDT */
+ printk(KERN_WARNING "ACPI: Wrong value from %s\n",
+ acpi_method);
+ /* Sanitize it */
d_min = d_max;
+ }
}
if (d_min_p)
*d_min_p = d_min;
return d_max;
}
+
+/**
+ * acpi_pm_device_sleep_wake - enable or disable the system wake-up
+ * capability of given device
+ * @dev: device to handle
+ * @enable: 'true' - enable, 'false' - disable the wake-up capability
+ */
+int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
+{
+ acpi_handle handle;
+ struct acpi_device *adev;
+
+ if (!device_may_wakeup(dev))
+ return -EINVAL;
+
+ handle = DEVICE_ACPI_HANDLE(dev);
+ if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+ printk(KERN_DEBUG "ACPI handle has no context!\n");
+ return -ENODEV;
+ }
+
+ return enable ?
+ acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
+ acpi_disable_wakeup_device_power(adev);
+}
#endif
static void acpi_power_off_prepare(void)
{
/* Prepare to power off the system */
acpi_sleep_prepare(ACPI_STATE_S5);
+ acpi_hw_disable_all_gpes();
}
static void acpi_power_off(void)
{
/* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
- printk("%s called\n", __FUNCTION__);
+ printk("%s called\n", __func__);
local_irq_disable();
+ acpi_enable_wakeup_device(ACPI_STATE_S5);
acpi_enter_sleep_state(ACPI_STATE_S5);
}
}
}
- suspend_set_ops(&acpi_pm_ops);
+ suspend_set_ops(old_suspend_ordering ?
+ &acpi_suspend_ops_old : &acpi_suspend_ops);
#endif
#ifdef CONFIG_HIBERNATION
status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
if (ACPI_SUCCESS(status)) {
- hibernation_set_ops(&acpi_hibernation_ops);
+ hibernation_set_ops(old_suspend_ordering ?
+ &acpi_hibernation_ops_old : &acpi_hibernation_ops);
sleep_states[ACPI_STATE_S4] = 1;
printk(" S4");
+ if (!nosigcheck) {
+ acpi_get_table_by_index(ACPI_TABLE_INDEX_FACS,
+ (struct acpi_table_header **)&facs);
+ if (facs)
+ s4_hardware_signature =
+ facs->hardware_signature;
+ }
}
#endif
status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
pm_power_off = acpi_power_off;
}
printk(")\n");
+ /*
+ * Register the tts_notifier to reboot notifier list so that the _TTS
+ * object can also be evaluated when the system enters S5.
+ */
+ register_reboot_notifier(&tts_notifier);
return 0;
}